Attenuation Correction Research Articles

Role of CT attenuation correction gated SPECT MPI in prediction of pulmonary hypertension

ObjectiveTo elucidate the value of gated SPECT-MPI using CT attenuation correction (AC) for prediction of pulmonary hypertension (PHT) in coronary patients by estimation of reliability of non-contrast CT in measurement of main pulmonary artery diameter (MPAd) as well as by assessment of potential predictive role of gated parameters as beneficial accessory findings. BackgroundContrast-enhanced CT is known as an accurate tool for assessment of MPAd to predict PHT. [1] The low-dose non-contrast CT which is used for AC in MPI study, however, has an unclear value in precise vascular diameter measurement; it is also uncertain whether gated parameters could help to predict PHT. Methods and patientsA total of 207 patients, who had a transthoracic echocardiography and MPI with an interval of maximum one month, underwent this retrospective study. PHT was defined as a RVSP ≥36 mmHg by echocardiography; peak tricuspid regurgitation velocity (PTRV) was also calculated to use as a criterion for PHT. Of all subjects, 120 had RVSP ≥ 36 and 87 showed RVSP < 36; there also were 191 and 16 patients with PTRV ≤ 3.4 m/s and >3.4 m/s, respectively. Comparison was made unconnectedly between each group regarding the echocardiography results with the MPI parameters, with and without CT-AC, including MPAd derived from CT as well as RV/LV uptake ratio, shape index and septal wall motion and thickening scores to define the best indicators of PHT. ResultsThere was a significant association between established benchmark of PHT in echocardiography (RVSP), with MPAd derived from non-contrast CT as well as with LV shape index from gated study and RV/LV uptake ratio acquired from non-AC SPECT-MPI. Also, stress and rest RV/LV uptake ratio, MPAd, LV end-systolic and LV end-diastolic shape indexes are significantly higher in patients with RVSP ≥ 36 mmHg compare to patients with RVSP < 36 mmHg. ConclusionsGated-SPECT-MPI using CT-AC can predict PHT by reliable estimation of MPAd as well as by defining RV/LV uptake ratio and shape index, providing an added clinical value for this invaluable modality in cardiac patients.

Prior information-guided reconstruction network for positron emission tomography images.

Deep learning has recently shown great potential in medical image reconstruction tasks. For positron emission tomography (PET) images, the direct reconstruction from raw data to radioactivity images using deep learning without any constraint may lead to the production of nonexistent structures. The aim of this study was to specifically develop and test a flexibly deep learning-based reconstruction network guided by any form of prior knowledge to achieve high quality and high reliability reconstruction. We developed a novel prior information-guided reconstruction network (PIGRN) with a dual-channel generator and a 2-scale discriminator based on a conditional generative adversarial network (cGAN). Besides the raw data channel, an additional channel is provided in the generator for prior information (PI) to guide the training phase. The PI can be reconstructed images obtained via conventional methods, nuclear medical images from other modalities, attenuation correction maps from time-of-flight-PET (TOF-PET) data, or any other physical parameters. For this study, the reconstructed images generated by filtered back projection (FBP) were chosen as the input of the additional channel. To improve the image quality, a 2-scale discriminator was adopted which can focus on both the coarse and fine field of the reconstruction images. Experiments were carried out on both a simulation dataset and a real Sprague Dawley (SD) rat dataset. Two classic deep learning-based reconstruction networks, including U-Net and Deep-PET, were compared in our study. Compared with these two methods, our method could provide much higher quality PET image reconstruction in the study of the simulation dataset. The peak signal-to-noise ratio (PSNR) value reached 31.8498, and the structure similarity index measure (SSIM) value reached 0.9754. The real study on SD rats indicated that the proposed network also has strong generalization ability. The flexible PIGRN based on cGAN for PET images combines both raw data and PI. The results of comparison experiments and a generalization experiment based on simulation and SD rat datasets demonstrated that the proposed PIGRN has the ability to improve image quality and has strong generalization ability.

Deep learning-based attenuation correction method in 99mTc-GSA SPECT/CT hepatic imaging: a phantom study.

This study aimed to evaluate a deep learning-based attenuation correction (AC) method to generate pseudo-computed tomography (CT) images from non-AC single-photon emission computed tomography images (SPECTNC) for AC in 99mTc-galactosyl human albumin diethylenetriamine pentaacetic acid (GSA) scintigraphy and to reduce patient dosage. A cycle-consistent generative network (CycleGAN) model was used to generate pseudo-CT images. The training datasets comprised approximately 850 liver phantom images obtained from SPECTNC and real CT images. The training datasets were then input to CycleGAN, and pseudo-CT images were output. SPECT images with real-time CT attenuation correction (SPECTCTAC) and pseudo-CT attenuation correction (SPECTGAN) were acquired. The difference in liver volume between real CT and pseudo-CT images was evaluated. Total counts and uniformity were then used to evaluate the effects of AC. Additionally, the similarity coefficients of SPECTCTAC and SPECTGAN were assessed using a structural similarity (SSIM) index. The pseudo-CT images produced a lower liver volume than the real CT images. SPECTCTAC exhibited a higher total count than SPECTNC and SPECTGAN, which were approximately 60% and 7% lower, respectively. The uniformities of SPECTCTAC and SPECTGAN were better than those of SPECTNC. The mean SSIM value for SPECTCTAC and SPECTGAN was 0.97. We proposed a deep learning-based AC approach to generate pseudo-CT images from SPECTNC images in 99mTc-GSA scintigraphy. SPECTGAN with AC using pseudo-CT images was similar to SPECTCTAC, demonstrating the possibility of SPECT/CT examination with reduced exposure to radiation.

Usefulness of volumetric BMD measurement by using low dose CT image acquired on L-spine Bone SPECT/CT

Purpose: CT scan makes up for the weak point of the nuclear medicine image having a low resolution and also were used for attenuation correction on image reconstruction. Recently, many studies try to make use of CT images additionally, one of them is to measure the bone mineral density(BMD) using Quantitative CT(QCT) software. BMD exams are performed to scan lumbar and femur with DXA(Dual-Energy X-Ray Absorptiometry) in order to diagnose bone disease such as osteopenia, osteoporosis. The purpose of this study is to identify the usefulness of QCT_BMD analyzed with low dose CT images on L-spine Bone SPECT/CT comparing with DXA_BMD. Materials and Methods: Fifty five women over 50 years old (mean 66.4 ± 9.1) who took the both examinations(L-spine Bone SPECT/CT with SIEMENS Intevo 16 and DXA scan with GE Lunar prodigy advance) within 90 days from April 2017 to July 2022, BMD, T-score and disease classification were analyzed. Three-dimensional BMD was analyzed with low dose CT images acquired on L-spine Bone SPECT/CT scan on Mindways QCT PROTM software and two-dimensional BMD was analyzed on DXA scan. Basically, Lumbar 1-4 were analyzed and the patients who has lesion or spine implants on L-spine were excluded for this study. Pearson's correlation analysis was performed in BMD and T-score, chi-square test was performed in disease classification between QCT and DXA. Results: On 55 patients, the minimum of QCT_BMD was 18.10, maximum was 166.50, average was 82.71 ± 31.5 mg/cm3. And the minimum of DXA-BMD was 0.540, maximum was 1.302, average was 0.902 ± 0.201 g/cm2, respectively. The result shows a strong statistical correlation between QCT_BMD and DXA_BMD(p&lt;0.001, r=0.76). The minimum of QCT_T-score was -5.7, maximum was-0.1, average was -3.2 ± 1.3 and the minimum of DXA_T-score was -5.0, maximum was 1.7, average was -2.0 ± 1.3, respectively. The result shows a statistical correlation between QCT T-score and DXA T-score (p&lt;0.001, r=0.66). On the disease classification, normal was 5, osteopenia was 25, osteoporosis was 25 in QCT and normal was 10, osteopenia was 25, osteoporosis was 20 in DXA. There was under-estimation of bone decrease relatively on DXA than QCT, but there was no significant differences statistically by chi-square test between QCT and DXA. Conclusion: Through this study, we could identify that the QCT measurement with low dose CT images QCT from L-Spine Bone SPECT/CT was reliable because of a strong statistical correlation between QCT_BMD and DXA_BMD. Bone SPECT/CT scan can provide three-dimensional information also BMD measurement with CT images. In the future, rather than various exams such as CT, BMD, Bone scan are performed, it will be possible to provide multipurpose information via only SPECT/CT scan. In addition, it will be very helpful clinically in the sense that we can provide a diagnosis of potential osteoporosis, especially in middleaged patients.

The effects of kilovoltage (kV) and milliampere seconds (mAs) values for SPECT attenuation correction: An anthropomorphic phantom study

The purpose of SPECT/CT imaging to be used in dosimetric calculations is to perform accurate attenuation correction by giving the patient the minimum radiation dose. in accordance with ALARA principles (as low as reasonably achievable), it is critical to limit the amount of radiation given to the patient as far as possible in medical fields where radiation therapy is applied. The goal of this study is to determine the optimum kV and mAs values needed to keep the radiation dose that can be given to the patient in CT scans at a minimum level for attenuation correction, as well as to determine the CT-induced radiation doses on patients with different kV and mAs values using an anthropomorphic phantom.Radionuclides 177Lu and 131I were used in SPECT imaging. For CT-based attenuation correction, images were taken with various values between 80 kV × 30 mAs and 140 kV × 300 mAs using the anthropomorphic phantom. After that attenuation correction was performed with the obtained CT images for SPECT images. Then, CT-derived radiation doses were calculated.Our results showed that 80 kV × 30 mAs values can be used in scans after radionuclide treatment for CT attenuation correction. It was determined that the patient was exposed to a radiation dose of 0.432 mSv as a result of the CT scanning with the full detector width area of gamma camera detector. Thus, scanning with these values (80 kV × 30 mAs) resulted in approximately 95% less radiation exposure (0,432 mSv) than the value (9,38 mSv) with scanning of the manufacturer's recommended value (120 kV × 200 mAs).

Rendimiento diagnóstico de un nuevo software de aprendizaje profundo para corrección de atenuación en la imagen de perfusión miocárdica utilizando una cámara CZT cardiodedicada. Experiencia en la práctica clínica

PurposeTo evaluate the diagnostic performance of a novel deep learning attenuation correction software (SAPCA) for myocardial perfusion imaging (MPI) using a cadmium-zinc-telluride (CZT) cardio dedicated camera with invasive coronary angiography (ICA) correlation for the diagnosis of coronary artery disease (CAD) in a high-risk population. MethodsRetrospective study of 300 patients (196 males [65%], mean age 68 years) from September 2014 to October 2019 undergoing MPI, followed by ICA and evaluated by means of quantitative angiography software, within six months after the MPI. The mean pre-test probability score for coronary disease according to the European Society of Cardiology criteria was 37% for the whole cohort. The MPI was performed in a dedicated CZT cardio camera (D-SPECT® Spectrum Dynamics) with a two-day protocol, according to the European Association of Nuclear Medicine guidelines. MPI was retrospectively evaluated with and without the SAPCA. ResultsThe overall diagnostic accuracy of MPI without SAPCA to identify patients with any obstructive CAD at ICA was 87%, Sensitivity 94%, Specificity 57%, positive predictive value 91% and negative predictive value 64%. Using SAPCA the overall diagnostic accuracy was 90%, sensitivity 91%, specificity 86%, positive predictive value 97% and negative predictive value 66%. ConclusionUse of the novel SAPCA enhances performance of the MPI using the CZT D-SPECT® camera and achieves improved results, especially avoiding artefacts and reducing the number of false positive results.

Preliminary Exploration of Pseudo-CT-Based Attenuation Correction for Simultaneous PET/MRI Brain Imaging in Nonhuman Primates

Preliminary Exploration of Pseudo-CT-Based Attenuation Correction for Simultaneous PET/MRI Brain Imaging in Nonhuman Primates

An automatic pipeline for PET/MRI attenuation correction validation in the brain

PurposeChallenges in PET/MRI quantitative accuracy for neurological uses arise from PET attenuation correction accuracy. We proposed and evaluated an automatic pipeline to assess the quantitative accuracy of four MRI-derived PET AC methods using analytically simulated PET brain lesions and ROIs as ground truth for PET activity.MethodsOur proposed pipeline, integrating a synthetic lesion insertion tool and the FreeSurfer neuroimaging framework, inserts simulated spherical and brain ROIs into PET projection space, reconstructing them via four PET MRAC techniques. Utilizing an 11-patient brain PET dataset, we compared the quantitative accuracy of four MRACs (DIXON, DIXONbone, UTE AC, and DL-DIXON) against the gold standard PET CTAC, evaluating MRAC to CTAC activity bias in spherical lesions and brain ROIs with and without background activity against original (lesion free) PET reconstructed images.ResultsThe proposed pipeline yielded accurate results for spherical lesions and brain ROIs, adhering to the MRAC to CTAC pattern of original brain PET images. Among the MRAC methods, DIXON AC exhibited the highest bias, followed by UTE, DIXONBone, and DL-DIXON showing the least. DIXON, DIXONbone, UTE, and DL-DIXON showed MRAC to CTAC biases of − 5.41%, − 1.85%, − 2.74%, and 0.08% respectively for ROIs inserted in background activity; − 7.02%, − 2.46%, − 3.56%, and − 0.05% for lesion ROIs without background; and − 6.82%, − 2.08%, − 2.29%, and 0.22% for the original brain PET images’ 16 FreeSurfer brain ROIs.ConclusionThe proposed pipeline delivers accurate results for synthetic spherical lesions and brain ROIs, with and without background activity consideration, enabling the evaluation of new attenuation correction approaches without utilizing measured PET emission data. Additionally, it offers a consistent method to generate realistic lesion ROIs, potentially applicable in assessing further PET correction techniques.

CT attenuation correction improves quantitative risk prediction by cardiac SPECT in obese patients.

This study aimed to compare the predictive value of CT attenuation-corrected stress total perfusion deficit (AC-sTPD) and non-corrected stress TPD (NC-sTPD) for major adverse cardiac events (MACE) in obese patients undergoing cadmium zinc telluride (CZT) SPECT myocardial perfusion imaging (MPI). The study included 4,585 patients who underwent CZT SPECT/CT MPI for clinical indications (chest pain: 56%, shortness of breath: 13%, other: 32%) at Yale New Haven Hospital (age: 64 ± 12years, 45% female, body mass index [BMI]: 30.0 ± 6.3kg/m2, prior coronary artery disease: 18%). The association between AC-sTPD or NC-sTPD and MACE defined as the composite end point of mortality, nonfatal myocardial infarction or late coronary revascularization (> 90days after SPECT) was evaluated with survival analysis. During a median follow-up of 25months, 453 patients (10%) experienced MACE. In patients with BMI ≥ 35kg/m2 (n = 931), those with AC-sTPD ≥ 3% had worse MACE-free survival than those with AC-sTPD < 3% (HR: 2.23, 95% CI: 1.40 - 3.55, p = 0.002) with no difference in MACE-free survival between patients with NC-sTPD ≥ 3% and NC-sTPD < 3% (HR:1.06, 95% CI:0.67 - 1.68, p = 0.78). AC-sTPD had higher AUC than NC-sTPD for the detection of 2-year MACE in patients with BMI ≥ 35kg/m2 (0.631 versus 0.541, p = 0.01). In the overall cohort AC-sTPD had a higher ROC area under the curve (AUC, 0.641) than NC-sTPD (0.608; P = 0.01) for detection of 2-yearMACE. In patients with BMI ≥ 35kg/m2 AC sTPD provided significant incremental prognostic value beyond NC sTPD (net reclassification index: 0.14 [95% CI: 0.20 - 0.28]). AC sTPD outperformed NC sTPD in predicting MACE in patients undergoing SPECT MPI with BMI ≥ 35kg/m2. These findings highlight the superior prognostic value of AC-sTPD in this patient population and underscore the importance of CT attenuation correction.

Impact of attenuation correction of radiotherapy hardware for positron emission tomography-magnetic resonance in ano-rectal radiotherapy patients.

Positron Emission Tomography-Magnetic Resonance (PET-MR) scanners could improve ano-rectal radiotherapy planning through improved Gross Tumour Volume (GTV) delineation and enabling dose painting strategies using metabolic measurements. This requires accurate quantitative PET images acquired in the radiotherapy treatmentposition. This study aimed to evaluate the impact on GTV delineation and metabolic parameter measurement of using novel Attenuation Correction (AC) maps that included the radiotherapy flat couch, coil bridge and anterior coil to see if they werenecessary. Seventeen ano-rectal radiotherapy patients received a -FluoroDeoxyGlucose PET-MR scan in the radiotherapy position. PET images were reconstructed without ( ) and with ( ) the radiotherapy hardware included. Both AC maps used the same Computed Tomography image for patient AC. Semi-manual and threshold GTVs were delineated on both PET images, the volumes compared and the Dice coefficient calculated. Metabolic parameters: Standardized Uptake Values , and Total Lesion Glycolysis (TLG) were compared using paired t-tests with a Bonferroni corrected significance level of . Differences in semi-manual GTV volumes between and were approaching statistical significance (difference , ), with larger differences in low FDG-avid tumours ( ). The and GTVs were concordant with Dice coefficients (manual) and (threshold). Metabolic parameters were significantly different, with , and TLG differences of ( ), ( ) and ( ) respectively. The TLG difference resulted in 1/8 rectal cancer patients changing prognosis group, based on literature TLG cut-offs, when using rather than . This study suggests that using AC maps with the radiotherapy hardware included is feasible for patient imaging. The impact on tumour delineation was mixed and needs to be evaluated in larger cohorts. However using AC of the radiotherapy hardware is important for situations where accurate metabolic measurements are required, such as dose painting and treatmentprognostication.

Impact of myocardial perfusion and coronary calcium on medical management for coronary artery disease.

Single-photon emission computed tomography (SPECT) myocardial perfusion imaging (MPI) remains one of the most widely used imaging modalities for the diagnosis and prognostication of coronary artery disease (CAD). Despite the extensive prognostic information provided by MPI, little is known about how this influences the prescription of medical therapy for CAD. We evaluated the relationship between MPI with computed tomography (CT) attenuation correction and prescription of acetylsalicylic acid (ASA) and statins. We performed a retrospective analysis of consecutive patients who underwent SPECT MPI at a single centre between 2015 and 2021. Myocardial perfusion abnormalities and coronary calcium burden were assessed, with attenuation correction imaging 77.8% of patients. Medication prescriptions before and within 180 days after the test were compared. Associations between abnormal perfusion and calcium burden with ASA and statin prescription were assessed using multivariable logistic regression. In total, 9908 patients were included, with a mean age 66.8 ± 11.7 years and 5337 (53.9%) males. The prescription of statins increased more in patients with abnormal perfusion (increase of 19.2 vs. 12.0%, P < 0.001). Similarly, the presence of extensive CAC led to a greater increase in statin prescription compared with no calcium (increase 12.1 vs. 7.8%, P < 0.001). In multivariable analyses, ischaemia and coronary artery calcium were independently associated with ASA and statin prescription. Abnormal MPI testing was associated with significant changes in medical therapy. Both calcium burden and perfusion abnormalities were associated with increased prescriptions of medical therapy for CAD.

Artificial Intelligence-Driven Single-Shot PET Image Artifact Detection and Disentanglement: Toward Routine Clinical Image Quality Assurance.

Medical imaging artifacts compromise image quality and quantitative analysis and might confound interpretation and misguide clinical decision-making. The present work envisions and demonstrates a new paradigm PET image Quality Assurance NETwork (PET-QA-NET) in which various image artifacts are detected and disentangled from images without prior knowledge of a standard of reference or ground truth for routine PET image quality assurance. The network was trained and evaluated using training/validation/testing data sets consisting of 669/100/100 artifact-free oncological 18 F-FDG PET/CT images and subsequently fine-tuned and evaluated on 384 (20% for fine-tuning) scans from 8 different PET centers. The developed DL model was quantitatively assessed using various image quality metrics calculated for 22 volumes of interest defined on each scan. In addition, 200 additional 18 F-FDG PET/CT scans (this time with artifacts), generated using both CT-based attenuation and scatter correction (routine PET) and PET-QA-NET, were blindly evaluated by 2 nuclear medicine physicians for the presence of artifacts, diagnostic confidence, image quality, and the number of lesions detected in different body regions. Across the volumes of interest of 100 patients, SUV MAE values of 0.13 ± 0.04, 0.24 ± 0.1, and 0.21 ± 0.06 were reached for SUV mean , SUV max , and SUV peak , respectively (no statistically significant difference). Qualitative assessment showed a general trend of improved image quality and diagnostic confidence and reduced image artifacts for PET-QA-NET compared with routine CT-based attenuation and scatter correction. We developed a highly effective and reliable quality assurance tool that can be embedded routinely to detect and correct for 18 F-FDG PET image artifacts in clinical setting with notably improved PET image quality and quantitative capabilities.

Spatio-Temporal Positron Emission Tomography Reconstruction with Attenuation and Motion Correction.

The detection of cancer lesions of a comparable size to that of the typical system resolution of modern scanners is a long-standing problem in Positron Emission Tomography. In this paper, the effect of composing an image-registering convolutional neural network with the modeling of the static data acquisition (i.e., the forward model) is investigated. Two algorithms for Positron Emission Tomography reconstruction with motion and attenuation correction are proposed and their performance is evaluated in the detectability of small pulmonary lesions. The evaluation is performed on synthetic data with respect to chosen figures of merit, visual inspection, and an ideal observer. The commonly used figures of merit-Peak Signal-to-Noise Ratio, Recovery Coefficient, and Signal Difference-to-Noise Ration-give inconclusive responses, whereas visual inspection and the Channelised Hotelling Observer suggest that the proposed algorithms outperform current clinical practice.

Ultra-low-dose CT for attenuation correction: dose savings and effect on PET quantification for protocols with and without tin filter

BackgroundUltra-low-dose (ULD) computed tomography (CT) scans should be used when CT is performed only for attenuation correction (AC) of positron emission tomography (PET) data. A tin filter can be used in addition to the standard aluminium bowtie filter to reduce CT radiation dose to patients. The aim was to determine how low CT doses can be, when utilised for PET AC, with and without the tin filter, whilst providing adequate PET quantification.MethodsA water-filled NEMA image quality phantom was imaged in three configurations with 18F-FDG: (1) water only (0HU); (2) with cylindrical insert containing homogenous mix of sand, flour and water (SFW, approximately 475HU); (3) with cylindrical insert containing sand (approximately 1100HU). Each underwent one-bed-position (26.3 cm) PET-CT comprising 1 PET and 13 CT acquisitions. CT acquisitions with tube current modulation were performed at 120 kV/50 mAs-ref (reference standard), 100 kV/7 mAs-ref (standard ULDCT for PET AC protocol), Sn140kV (mAs range 7–50-ref) and Sn100kV (mAs range 12–400-ref). PET data were reconstructed with μ-maps provided by each CT dataset, and PET activity concentration measured in each reconstruction. Differences in CT dose length product (DLP) and PET quantification were determined relative to the reference standard.ResultsAt each tube voltage, changes in PET quantification were greater with increasing density and reducing mAs. Compared with the reference standard, differences in PET quantification for the standard ULDCT protocol for the three phantoms were ≤ 1.7%, with the water phantom providing a DLP of 7mGy.cm. With tin filter at Sn100kV, differences in PET quantification were negligible (≤ 1.2%) for all phantoms down to 50mAs-ref, proving a DLP of 2.8mGy.cm, at 60% dose reduction compared with standard ULDCT protocol. Below 50mAs-ref, differences in PET quantification were > 2% for at least one phantom (2.3% at 25mAs-ref in SFW; 6.4% at 12mAs-ref in sand). At Sn140kV/7mAs-ref, quantification differences were ≤ 0.6% in water, giving 3.8mGy.cm DLP, but increased to > 2% at bone-equivalent densities.ConclusionsCT protocols for PET AC can provide ultra-low doses with adequate PET quantification. The tin filter can allow 60–87% lower dose than the standard ULDCT protocol for PET AC, depending on tissue density and accepted change in PET quantification.

Comparison of the prognostic value between quantification and visual estimation of coronary calcification from attenuation CT in patients undergoing SPECT myocardial perfusion imaging.

We investigated the prognostic utility of visually estimated coronary artery calcification (VECAC) from low dose computed tomography attenuation correction (CTAC) scans obtained during SPECT/CT myocardial perfusion imaging (MPI), and assessed how it compares to coronary artery calcifications (CAC) quantified by calcium score on CTACs (QCAC). From the REFINE SPECT Registry 4,236 patients without prior coronary stenting with SPECT/CT performed at a single center were included (age: 64 ± 12 years, 47% female). VECAC in each coronary artery (left main, left anterior descending, circumflex, and right) were scored separately as 0 (absent), 1 (mild), 2 (moderate), or 3 (severe), yielding a possible score of 0-12 for each patient (overall VECAC grade zero:0, mild:1-2, moderate: 3-5, severe: >5). CAC scoring of CTACs was performed at the REFINE SPECT core lab with dedicated software. VECAC was correlated with categorized QCAC (zero: 0, mild: 1-99, moderate: 100-399, severe: ≥400). A high degree of correlation was observed between VECAC and QCAC, with 73% of VECACs in the same category as QCAC and 98% within one category. There was substantial agreement between VECAC and QCAC (weighted kappa: 0.78 with 95% confidence interval: 0.76-0.79, p < 0.001). During a median follow-up of 25 months, 372 patients (9%) experienced major adverse cardiovascular events (MACE). In survival analysis, both VECAC and QCAC were associated with MACE. The area under the receiver operating characteristic curve for 2-year-MACE was similar for VECAC when compared to QCAC (0.694 versus 0.691, p = 0.70). In conclusion, visual assessment of CAC on low-dose CTAC scans provides good estimation of QCAC in patients undergoing SPECT/CT MPI. Visually assessed CAC has similar prognostic value for MACE in comparison to QCAC.

Reconstruction of multi-animal PET acquisitions with anisotropically variant PSF

Among other factors such as random, attenuation and scatter corrections, uniform spatial resolution is key to performing accurate quantitative studies in Positron emission tomography (PET). Particularly in preclinical PET studies involving simultaneous acquisition of multiple animals, the degradation of image resolution due to the depth of interaction (DOI) effect far from the center of the Field of View (FOV) becomes a significant concern. In this work, we incorporated a spatially-variant resolution model into a real time iterative reconstruction code to obtain accurate images of multi-animal acquisition. We estimated the spatially variant point spread function (SV-PSF) across the FOV using measurements and Monte Carlo (MC) simulations. The SV-PSF obtained was implemented in a GPU-based Ordered subset expectation maximization (OSEM) reconstruction code, which includes scatter, attenuation and random corrections. The method was evaluated with acquisitions from two preclinical PET/CT scanners of the SEDECAL Argus family: a Derenzo phantom placed 2 cm off center in the 4R-SuperArgus, and a multi-animal study with 4 mice in the 6R-SuperArgus. The SV-PSF reconstructions showed uniform spatial resolution without significant increase in reconstruction time, with superior image quality compared to the uniform PSF model.

Pre-acquired CT-based attenuation correction with automated headrest removal for a brain-dedicated PET system.

Attenuation correction (AC) is essential for quantitative positron emission tomography (PET) images. Attenuation coefficient maps (μ-maps) are usually generated from computed tomography (CT) images when PET-CT combined systems are used. If CT has been performed prior to PET imaging, pre-acquired CT can be used for brain PET AC, because the human head is almost rigid. This pre-acquired CT-based AC approach is suitable for stand-alone brain-dedicated PET, such as VRAIN (ATOX Co. Ltd., Tokyo, Japan). However, the headrest of PET is different from the headrest in pre-acquired CT images, which may degrade the PET image quality. In this study, we prepared three different types of μ-maps: (1) based on the pre-acquired CT, where namely the headrest is different from the PET system (μ-map-diffHr); (2) manually removing the headrest from the pre-acquired CT (μ-map-noHr); and (3) artificially replacing the headrest region with the headrest of the PET system (μ-map-sameHr). Phantom images by VRAIN using each μ-map were investigated for uniformity, noise, and quantitative accuracy. Consequently, only the uniformity of the images using μ-map-diffHr was out of the acceptance criteria. We then proposed an automated method for removing the headrest from pre-acquired CT images. In comparisons of standardized uptake values in nine major brain regions from the 18F-fluoro-2-deoxy-D-glucose-PET of 10 healthy volunteers, no significant differences were found between the μ-map-noHr and the μ-map-sameHr. In conclusion, pre-acquired CT-based AC with automated headrest removal is useful for brain-dedicated PET such as VRAIN.

Correction for the Attenuation Due to Atmospheric Gas and Stratiform Clouds in Triple-Frequency Radar Observations of the Microphysical Properties of Snowfall

For triple-frequency radar, the attenuation attributed to atmospheric gases and stratiform clouds is diverse due to different snowfall microphysical properties, particularly in regions far from the radar. When using triple-frequency ground-based radar measurements, evaluating the attenuation of the three radars at different heights is common to derive attenuation-corrected effective reflectivity. Therefore, this study proposes a novel quality-controlled approach to identify radar attenuation due to gases and stratiform clouds that can be neglected due to varying snowfall microphysical properties and assess attenuation along the radar observation path. The key issue lies in the lack of information about vertical hydrometeor and cloud distribution. Therefore, European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis data are employed. The Self-Similar-Rayleigh-Gans Approximation (SSRGA) for the nonspherical scattering model in the Passive and Active Microwave TRAnsfer model 2 (PAMTRA2) is compared and analyzed against other scattering models to obtain the optimal triple-frequency radar attenuation correction strategies for stratiform cloud meteorological conditions with varying snowfall microphysical properties. This methodology paves the way for understanding differential attenuation attributed to gas and stratiform clouds with snowfall microphysical properties. Simultaneously, the bin-by-bin approximation method is used to perform the attenuation correction. The two-way attenuation correction increased up to 4.71 dB for heights above 6 km, remaining minimal for regions with heights below 6 km. These values, attributable to gases and stratiform clouds’ two-way attenuation, are nonnegligible, especially at distances far from the W-band radar at heights above 6 km. Both values are relatively small for the X- and Ka-band radars and can be neglected for the varying snowfall microphysical properties. The attenuation correction of triple-frequency radar reflectivity is validated using the cross-calibration and dual-frequency reflectivity ratios. The results show that the method is valid and feasible.

A Two-Dimensional K-Shell X-ray Fluorescence (2D-KXRF) Model for Soft Tissue Attenuation Corrections of Strontium Measurements in a Cortical Lamb Bone Sample

Human bones store elements such as calcium, phosphorus, and strontium, and accumulate toxic elements such as lead. In vivo measurements of elemental bone concentration can be done using X-ray fluorescence (XRF) techniques. Monte Carlo (MC) simulations of X-ray interactions were predominantly employed in this field to develop calibration methods that linked XRF measurements to concentrations. A simple and fast two-dimensional K-shell X-ray fluorescence model was developed to compute the KXRF signal of elements in bone and overlying soft tissue samples. The model is an alternative to MC methods and can guide future bone XRF studies. Contours of bone and soft tissue cross sections were elliptical and only KXRF signals from absorption of primary photons were considered. Predictions of the model were compared to Sr KXRF measurements using the bare lamb bone (LB) and the LB with overlying leather. XRF experiments used a small X-ray beam, silicon X-ray detector, and three positioning stages. Linear attenuation coefficients of the leather and LB were measured and used in the model. Measured and model-derived values of the Sr X-rays leather attenuation and Sr Kβ/Kα ratio agreed, but estimated bone Sr concentrations were likely overestimated. Results, approximations, future work directions, and applications were discussed.

Epicardial fat volume, an independent risk factor for major adverse cardiovascular events, had an incremental prognostic value to myocardial perfusion imaging in Chinese populations with suspected or known coronary artery disease with a normal left ventricular ejection fraction.

Most coronary artery disease (CAD) patients with a normal left ventricular ejection fraction (LVEF) experience a poor prognosis. Single-photon emission computerized tomography (SPECT)-myocardial perfusion imaging (MPI), a routine examination, is useful in assessing risk and predicting major adverse cardiovascular events (MACEs) in populations with suspected or known CAD. SPECT/CT is a "one-stop shop" examination, which, through non-contrast CT, can produce attenuation correction for MPI and obtain information on coronary artery calcium (CAC) and epicardial fat volume (EFV) simultaneously. This study aims to investigate the predictive and incremental value of EFV to MPI for MACE in Chinese populations with suspected or known CAD with a normal LVEF. We retrospectively studied 290 suspected or known CAD inpatients with a normal LVEF who underwent SPECT/CT between February 2014 and December 2017. Abnormal MPI was defined as a summed stress score ≥4 or summed difference score ≥2. EFV and CAC were calculated using non-contrast CT. The end date of follow-ups was in February 2022. The follow-up information was obtained from the clinical case notes of the patients or reviews of telephone calls. MACE was defined as cardiac death, late coronary revascularization ≥3 months after MPI, non-fatal myocardial infarction, angina-related rehospitalization, heart failure, and stroke. During the 76-month follow-up, the event rate was 32.0% (93/290). Univariate and multivariate Cox regression analyses concluded that high EFV (>108.3 cm3) [hazard ratio (HR): 3.3, 95% CI: 2.1-5.2, P < 0.000] and abnormal MPI (HR: 1.8, 95% CI: 1.1-2.8, P = 0.010) were independent risk factors for MACE. The event-free survival of patients with high EFV was significantly lower than that of the low EFV group (log-rank test P < 0.001). In the subgroup with normal MPI, high EFV was associated with reduced event-free survival (log-rank P < 0.01), with a higher annualized event rate (8.3% vs. 1.9%). Adding high EFV to MPI could predict MACEs more effectively, with a higher concordance index (0.56-0.69, P < 0.01), higher global chi square (7.2-41.4, P < 0.01), positive integrated discrimination improvement (0.10, P < 0.01), and net reclassification index (0.37, P < 0.01). In Chinese populations with suspected or known CAD with normal LVEF, high EFV was an independent risk factor for MACE after adjusting for traditional risk factors, CAC and MPI. In subgroups with normal MPI, EFV could also improve risk stratification. Adding EFV to MPI had an incremental value for predicting MACE.