Sp2 Carbon Research Articles

Rare Earth Er‐Nd Dual Single‐Atomic Catalysts for Efficient Visible‐light Induced CO2 Reduction to CnH2n+1OH (n=1, 2)

Efficient synthesis of CnH2n+1OH (n=1, 2) via photochemical CO2 reduction holds promise for achieving carbon neutrality but remains challenging. Here, we present rare‐earth dual single atoms (SAs) catalysts containing ErN6 and NdN6 moieties, fabricated via an atom‐confinement and coordination method. The dual Er‐Nd SAs catalysts exhibit unprecedented generation rates of 1761.4 μmol g–1 h–1 and 987.7 μmol g–1 h–1 for CH3CH2OH and CH3OH, respectively. Through a combination of theoretical calculation, X‐ray absorption near edge structural analysis, aberration‐corrected transmission electron microscopy, and in‐situ FT‐IR spectroscopy, we demonstrate that the Er SAs facilitate charge transfer, serving as active centers for C−C bond formation, while Nd SAs provide the necessary *CO for C−C coupling in C2H5OH synthesis under visible light. Furthermore, the experiment and density functional theory calculation elucidate that the variety of electronic states induced by 4f orbitals of the Er SAs and the p−f orbital hybridization of Er−N moieties enable the formation of charge‐transfer channel. Therefore, this study sheds light on the pivotal role of *CO adsorption in achieving efficient conversion from CO2 to CnH2n+1OH (n=1, 2) via a novel rare‐earth‐based dual SAs photocatalysis approach.

Rare Earth Er‐Nd Dual Single‐Atomic Catalysts for Efficient Visible‐light Induced CO2 Reduction to CnH2n+1OH (n=1, 2)

Efficient synthesis of CnH2n+1OH (n=1, 2) via photochemical CO2 reduction holds promise for achieving carbon neutrality but remains challenging. Here, we present rare‐earth dual single atoms (SAs) catalysts containing ErN6 and NdN6 moieties, fabricated via an atom‐confinement and coordination method. The dual Er‐Nd SAs catalysts exhibit unprecedented generation rates of 1761.4 μmol g–1 h–1 and 987.7 μmol g–1 h–1 for CH3CH2OH and CH3OH, respectively. Through a combination of theoretical calculation, X‐ray absorption near edge structural analysis, aberration‐corrected transmission electron microscopy, and in‐situ FT‐IR spectroscopy, we demonstrate that the Er SAs facilitate charge transfer, serving as active centers for C−C bond formation, while Nd SAs provide the necessary *CO for C−C coupling in C2H5OH synthesis under visible light. Furthermore, the experiment and density functional theory calculation elucidate that the variety of electronic states induced by 4f orbitals of the Er SAs and the p−f orbital hybridization of Er−N moieties enable the formation of charge‐transfer channel. Therefore, this study sheds light on the pivotal role of *CO adsorption in achieving efficient conversion from CO2 to CnH2n+1OH (n=1, 2) via a novel rare‐earth‐based dual SAs photocatalysis approach.

Tuning the Charge Transfer in MWCNTs via the Incorporation of ZnONPs and AgNPs: The Role of Carbon Binding with ZnO/Ag Heterostructures in Reactive Species Formation.

In this research, multi-walled carbon nanotubes (MWCNTs) were decorated with two kinds of nanostructures, (1) silver nanoparticles (AgNPs) and (2) zinc oxide-silver nano-heterostructures (ZnO/Ag-NHs), via an accessible chemical coprecipitation method assisted with ultrasonic radiation. The high-resolution transmission electron microscopy analysis demonstrated the successful decoration of MWCNTs with the nanostructures with a diameter size of 11 nm ± 2 nm and 46 nm ± 5 nm for the AgNPs and the ZnO/Ag-NHs, respectively. The reactive species were promoted in an aqueous medium assisted with UV irradiation on the functionalized MWCNT. UV-Vis spectroscopy demonstrated that production of the reactive species density increased 4.07 times, promoted by the single MWCNT after the functionalization. X-ray photoelectron spectroscopy showed that Sp2 hybridization in carbon atoms of MWCNTs participates in the binding of AgNPs and ZnO/Ag-NH decoration and thus participates in the formation of reactive species in an aqueous medium, as is the case for cancer cells.

Ligand-to-Metal Charge Transfer (LMCT) Catalysis: Harnessing Simple Cerium Catalysts for Selective Functionalization of Inert C-H and C-C Bonds.

ConspectusChemists have long pursued harnessing light energy and photoexcitation processes for synthetic transformations. Ligand-to-metal charge transfer (LMCT) in high-valent metal complexes often triggers bond homolysis, generating oxidized ligand-centered radicals and reduced metal centers. While photoinduced oxidative activations can be enabled, this process, typically seen as photochemical decomposition, remains underexplored in catalytic applications. To mitigate decomposition during LMCT excitation, we developed a catalytic cycle integrating in situ coordination, LMCT, and ligand homolysis to activate ligated alcohols transiently into alkoxy radicals. This catalytic approach leverages Ce(IV) LMCT excitation and highly reactive alkoxy radical intermediates for selective functionalizations of C(sp3)-H and C(sp3)-C(sp3) bonds under mild conditions. In this Account, we discuss these advancements, highlighting the practical utility of cost-effective cerium salts as catalysts and their potential to develop innovative transformations, addressing long-standing synthetic challenges.Selective functionalization of chemically inert C(sp3)-H bonds has long posed a significant challenge. We first detail our research using LMCT-enabled alkoxy radical-mediated hydrogen atom transfer (HAT) processes for selective C(sp3)-H functionalizations. Using readily available CeCl3, we established a general protocol for employing free alcohols in the Barton reaction. By integrating LMCT and HAT catalysis, we introduced a selective photocatalytic strategy for functionalizing feedstock alkanes, converting gaseous hydrocarbons into valuable products. Employing simple cerium salts like Ce(OTf)3 and CeCl3, we achieved selective C-H amination of methane and ethane at ambient temperature, achieving turnover numbers of 2900 and 9700, respectively. This catalytic manifold has been further exploited to address the site-selectivity challenge in the C-H functionalization of linear alkanes. The use of methanol as a cocatalyst enabled preferential functionalization of the most electron-rich sites, achieving a high intrinsic selectivity over 12:1 of secondary vs primary sites in pentane and hexane.Next, we discuss the catalytic utilization of alkoxy-radical-mediated β-scission, a frequently encountered side reaction in HAT transformations, for selective cleavage and functionalization of C-C bonds. The versatility of the LMCT catalytic platform facilitates the generation of alkoxy radicals from various free alcohols. In our initial demonstration of LMCT-enabled C(sp3)-C(sp3) bond activation, we developed a cerium-catalyzed ring-opening and amination of cycloalkanols, providing an effective protocol for cleaving unstrained C-C bonds. This strategy has been successfully applied to various radical cross-coupling processes, leading to innovative transformations such as ring expansions of cycloalkanols, dehydroxymethylative alkylation, amination, alkenylation, and ring expansions of cyclic ketones. These results highlight the synthetic potential of employing LMCT-mediated β-scission and ubiquitous C-C bonds as unconventional functional handles for generating molecular complexity.Lastly, we delve into our mechanistic investigations. Beyond the catalytic application of Ce(IV) LMCT in various transformations, we have undertaken comprehensive mechanistic studies. These investigations encompass characterization of Ce(IV) alkoxide complexes to elucidate their structures, evaluation of their photoactivity and selectivity in radical generation, and elucidation of kinetic pathways associated with transient LMCT excited states. Our research has revealed ultrafast bond homolysis, back electron transfer, and the selectivity of heteroleptic complexes in homolysis, providing crucial insights for advancing LMCT catalysis.

Metal-Free Wet Chemistry for the Fast Gram-Scale Synthesis of γ-Graphyne and its Derivatives.

γ-Graphyne (GY), an emerging carbon allotrope, is envisioned to offer various alluring properties and broad applicability. While significant progress has been made in the synthesis of GY over recent decades, its widespread application hinges on developing efficient, scalable, and accessible synthetic methods for the production of GY and its derivatives. Here we report a facile metal-free nucleophilic crosslinking method using wet chemistry for fast gram-scale production of GY and its derivatives. This synthesis method involves the aromatic nucleophilic substitution reactions between fluoro-(hetero)arenes and alkynyl silanes in the presence of a catalytic amount of tetrabutylammonium fluoride, where the fluoride plays a crucial role in removing protective groups from alkynyl silanes and generating reactive alkynylides. Our comprehensive analysis of the as-prepared GY reveals a layered structure, characterized by the presence of the C(sp)-C(sp2) bond. The synthetic strategy shows remarkable tolerance to various functional groups and enables the preparation of diverse F-/N-rich GY derivatives, using electron-deficient fluoro-substituted (hetero)arenes as precursors. The feasibility of producing GY and derivatives from fluorinated (hetero)arenes through the metal-free, scalable, and cost-effective approach paves the way for broad applications of GY and may inspire the development of new carbon materials.

Modulating of d-band center in Cu single-atom anchored Co3O4 nanozyme for sensitive immunochromatographic test strip

Immunochromatographic test strip (ITS) has been widely employed for point-of-care diagnoses. However, how to significantly enhance the analytical sensitivity of device-free ITS remains a challenge. Here, we synthesized a Cu single-atom anchored Co3O4 (CuSA/Co3O4) nanozyme that possesses ultrahigh peroxidase-mimicking catalytic activity owing to d-band center upshift mediated by Cu single-atom. Molecular orbital analysis demonstrated that d orbitals in CuSA/Co3O4 have stronger orbital hybridization affinity than Co3O4 to H2O2′s π* orbitals. This reinforces hydroxyl radical (OH) production and provides a stronger catalytic colorimetric signal, which is beneficial for improving the sensitivity of ITS. Moreover, we applied the CuSA/Co3O4 to ITS as a signal reporter for monitoring Xanthomonas oryzae pv. oryzicola (Xoc), the pathogen of rice bacterial leaf streak. The visual limit of detection (LOD) of the developed CuSA/Co3O4-based ITS was as low as 6.4 × 102 CFU mL−1, which is 25-fold more sensitive than the traditional Au nanoparticles (AuNP)-based ITS. Taken together, this work demonstrates the great potential of CuSA/Co3O4 nanocomposite as a signal reporter to improve the sensitivity of ITS for on-site Xoc detection.

Effect of External Electric Field on Nitrogen Activation on a Trimetal Cluster.

Efficient nitrogen (N2) fixation and activation under mild conditions are crucial for modern society. External electric fields (Felectric) can significantly affect N2 activation. In this work, the effect of Felectric on N2 activation by Nb3 clusters supported in a sumanene bowl was studied by density functional theory calculations. Four typical systems at different stages of N-N activation were studied, including two intermediates and two transition states. The impact of Felectric on various properties related to N2 activation was investigated, including the N-N bond length, overlap population density of states (OPDOS), total energy of the system, adsorption energy of N2, decomposition of energy changes, and electron transfer. The sumanene not only functions as a support and protective substrate, but also serves as a donor or acceptor under different Felectric conditions. Negative Felectric is beneficial to N-N bond activation because it promotes electron transfer to the N-N region and improves the d-π* orbital hybridization between metals and N2 in the activation process. Positive Felectric improves d-π* orbital hybridization only when the N-N is nearly dissociated. The microscopic mechanism of Felectric's effects provides insight into N2 activation and theoretical guidance for the design of catalytic reaction conditions for nitrogen reduction reactions (NRR).

Coordination Desymmetrization of Copper Single-Atom Catalyst for Efficient Nitrate Reduction.

Coordination engineering strategy for optimizing the catalytic performance of single-atom catalysts (SACs) has been rapidly developed over the last decade. However, previous reports on copper SACs for nitrate reduction reactions (NO3RR) have mostly focused on symmetric coordination configurations such as Cu-N4 and Cu-N3. In addition, the mechanism in terms of the regulation of coordination environment and catalytic properties of SACs has not been well demonstrated. Herein, we disrupted the local symmetric structure of copper atoms by introducing unsaturated heteroatomic coordination of Cu-O and Cu-N to achieve the coordination desymmetrization of Cu-N1O2 SACs. The Cu-N1O2 SACs exhibit an efficient nitrate-to-ammonia conversion with a high FE of ~96.5 % and a yield rate of 3120 μg NH3 h-1 cm-2 at -0.60 V vs RHE. As indicated by in situ Raman spectra, the catalysts facilitate the accumulation of NO3 - and the selective adsorption of *NO2, which were further confirmed by the theoretical study of surface dipole moment and orbital hybridization. Our work illustrated the correlation between the coordination desymmetrization and the catalytic performance of copper SACs for NO3RR.

Effective Alkyl-Alkyl Cross-Coupling with an Iron-Xantphos Catalyst: Mechanistic and Structural Insights.

While iron-catalyzed C(sp2)-C(sp3) cross-couplings have been widely studied and developed in the last decade, alkyl-alkyl cross-coupling systems with iron remain underdeveloped despite the importance of C(sp3)-C(sp3) bonds in organic synthesis. A major challenge to the development of these reactions is the current lack of fundamental insight into ligand effects and organoiron intermediates that enable effective alkyl-alkyl couplings. The current study addresses this longstanding limitation using a combination of 57Fe Mössbauer spectroscopy, SC-XRD (single-crystal X-ray diffraction) and reactivity studies of alkyl-alkyl coupling with iron-Xantphos to define the in situ formed iron-Xantphos intermediates in catalysis. Combined with detailed reactivity studies, the nature of the key mechanistic pathways in catalysis and ligands effects to achieve effective alkyl-alkyl cross-coupling over competing b-H elimination pathways are probed. Overall, these foundational studies provide a platform for future bespoke ligand and pre-catalyst design for alkyl-alkyl cross-coupling methods development with sustainable iron catalysis.

Effective Alkyl‐Alkyl Cross‐Coupling with an Iron‐Xantphos Catalyst: Mechanistic and Structural Insights

While iron‐catalyzed C(sp2)‐C(sp3) cross‐couplings have been widely studied and developed in the last decade, alkyl‐alkyl cross‐coupling systems with iron remain underdeveloped despite the importance of C(sp3)‐C(sp3) bonds in organic synthesis. A major challenge to the development of these reactions is the current lack of fundamental insight into ligand effects and organoiron intermediates that enable effective alkyl‐alkyl couplings. The current study addresses this longstanding limitation using a combination of 57Fe Mössbauer spectroscopy, SC‐XRD (single‐crystal X‐ray diffraction) and reactivity studies of alkyl‐alkyl coupling with iron‐Xantphos to define the in situ formed iron‐Xantphos intermediates in catalysis. Combined with detailed reactivity studies, the nature of the key mechanistic pathways in catalysis and ligands effects to achieve effective alkyl‐alkyl cross‐coupling over competing b‐H elimination pathways are probed. Overall, these foundational studies provide a platform for future bespoke ligand and pre‐catalyst design for alkyl‐alkyl cross‐coupling methods development with sustainable iron catalysis.

Hydrogen Evolution Reactivity of Pentagonal Carbon Rings and p-d Orbital Hybridization Effect with Ru.

Topological defects are inevitable existence in carbon-based frameworks, but their intrinsic electrocatalytic activity and mechanism remain under-explored. Herein, the hydrogen evolution reaction (HER) of pentagonal carbon-rings is probed by constructing pentagonal ring-rich carbon (PRC), with optimized electronic structures and higher HER activity relative to common hexagonal carbon (HC). Furthermore, to improve the reactivity, we couple Ru clusters with PRC (Ru@PRC) through p-d orbital hybridization between C and Ru atoms, which drives a shortcut transfer of electrons from Ru clusters to pentagonal rings. The electron-deficient Ru species leads to a notable negative shift in d-band centers of Ru and weakens their binding strength with hydrogen intermediates, thus enhancing the HER activity in different pH media. Especially, at a current density of 10 mA cm-2, PRC greatly reduces alkaline HER overpotentials from 540 to 380 mV. And Ru@PRC even exhibits low overpotentials of 28 and 275 mV to reach current densities of 10 and 1000 mA cm-2, respectively. Impressively, the mass activity and price activity of Ru@PRC are 7.83 and 15.7 times higher than that of Pt/C at the overpotential of 50 mV. Our data unveil the positive HER reactivity of pentagonal defects and good application prospects.

An environment-friendly method to prepare fulvic acid-based porous carbon for high energy density supercapacitors

Low energy density (Eg) of supercapacitors (SCs) severely limits their industrial applications. Enhancing the voltage window of SCs is an effective method to achieve a square-fold increase in Eg. 3D hierarchical porous carbons (FPs) with high yield (14.5 %) and high conductivity (87 S m−1) were prepared by an interfacial self-assembly method using low-cost biomass fulvic acid (FA) as a carbon resource and employs P123 as a structure-directing agent. The soft template P123 establishes a key role in the formation of FPs. It not only enhances the pore connectivity of FPs but also induces an interfacial orientation of the carbon micro-domains in FA. Furthermore, high-temperature annealing can repair the carbon network of FPs, thus FPs are endowed with high electrical conductivity, low carbon defects and low oxygen content (4.1 at.%), which leads to superior voltage-withstanding properties. By exploiting its structural advantages, the optimized sample FP800 exhibits a specific surface area of 1938 m2 g−1, sp2 carbon (88.5 %), a high mesopore ratio of 30.76 % and a high voltage of 3.2 V in commercial TEABF4/PC electrolyte. It gets high Cg of 107 F g−1 at 1 A g−1, high rate performance (C10/0.05) of 82.0 % and maximum Eg of 39.1 Wh kg−1. Furthermore, it also obtains an ultra-stable lifespan with 90.6 % capacity retention after 60,000 cycles. Compared to FP750 and FP850, FP800 has a more reasonable electrochemical performance.

Alkylation of Glycine Derivatives through a Synergistic Single-Electron Transfer and Halogen-Atom Transfer Process.

Here, we present a versatile method for forming C(sp3)-C(sp3) bonds, enabling the synthesis of a range of natural and non-natural amino acids. This approach utilizes readily available glycine derivatives and alkyl iodides, combining single-electron transfer and halogen-atom transfer processes. The utility of this step-economic and redox-economic C(sp3)-C(sp3) bond formation is further highlighted in the late-stage site-selective modifications of the glycine residue in short peptides.

Radical Replacement Process for Ligated Boryl Radical-Mediated Activation of Unactivated Alkyl Chlorides for C(sp3)-C(sp3) Bond Formation.

The ligated boryl radical (LBR) has emerged as a potent tool for activating alkyl halides in radical transformations through halogen-atom transfer (XAT). However, unactivated alkyl chlorides still present an open challenge for this strategy. We herein describe a new activation mode of the LBR for the activation of unactivated alkyl chlorides to construct a C(sp3)-C(sp3) bond. Mechanistic studies reveal that the success of the protocol relies on a radical replacement process between the LBR and unactivated alkyl chloride, forming an alkyl borane intermediate as the alkyl radical precursor. Aided with the additive K3PO4, the alkyl borane then undergoes one-electron oxidation, generating an alkyl radical. The incorporation of the radical replacement activation model to activate unactivated alkyl chlorides significantly enriches LBR chemistry, which has been applied to activate alkyl iodides, alkyl bromides, and activated alkyl chlorides via XAT.

Nanocarbon-Polymer Composites for Next-Generation Breast Implant Materials.

Most breast implants currently used in both reconstructive and cosmetic surgery have a silicone outer shell, which, despite much progress, remains susceptible to mechanical failure, infection, and foreign body response. This study shows that the durability and biocompatibility of breast implant-grade silicone can be enhanced by incorporating carbon nanomaterials of sp2 and sp3 hybridization into the polymer matrix and onto its surface. Plasma treatment of the implant surface can be used to modify platelet adhesion and activation to prevent thrombosis, postoperative infection, and inflammation disorders. The addition of 0.8% graphene flakes resulted in an increase in mechanical strength by 64% and rupture strength by around 77% when compared to pure silicone, whereas when nanodiamond (ND) was used as the additive, the mechanical strength was increased by 19.4% and rupture strength by 37.5%. Composites with a partially embedded surface layer of either graphene or ND showed superior antimicrobial activity and biocompatibility compared to pure silicone. All composite materials were able to sustain the attachment and growth of human dermal fibroblast, with the preferred growth noted on ND-coated surfaces when compared to graphene-coated surfaces. Exposure of these materials to hydrogen plasma for 5, 10, and 20 s led to substantially reduced platelet attachment on the surfaces. Hydrogen-treated pure silicone showed a decrease in platelet attachment for samples treated for 5-20 s, whereas silicone composite showed an almost threefold decrease in platelet attachment for the same plasma treatment times. The absence of platelet activation on the surface of composite materials suggests a significant improvement in hemocompatibility of the material.

Decomposition of PFAS and Synthesis of BC8 Super-Diamond: Rotations of Electromagnetic Waves for Novel Chemical Dynamics

A new theory is given for the decomposition of PFAS and the formation of BC8 Super-diamond with 13C isotope by application of RBL’s rotating magnetic field, neutrinos and/or antineutrinos and static magnetic field for stimulating nuclei having nonzero nuclear magnetic moments (NMMs). The induced NMMs are proposed more readily in the 19F of PFAS due to the large mass defect of 19F and the many C-F bonds per molecule. The super-diamond with 13C isotope is reasoned to form with its body center cubic lattice with central 13-carbon atom per cube due to the rotating magnetic field, neutrinos and/or antineutrinos and resulting internal induced sp3 hybridization with more efficiency for the applied external pressure and internal pressure by 13C isotope to be better used to compress the resulting sp3 carbon atoms to BC8 super-diamond. The author invented the use of rotating electromagnetic, neutrino and/or antineutrino and magnetic fields to affect chemical dynamics in 2000-07. The author (RBL) thereby here reports the theory and discovery of unusual and large interactions of highly, energetic dynamical hydrogen bonds with neutrinos and antineutrinos.

Exploring novel Zn2SeX (X=S, Te) ternary chalcogenide: Studying the effect of chalcogen substitution on optoelectronic, and thermoelectric performance

Ternary-type semiconductor chalcogenide materials are distinguished by their outstanding thermal performance and tunable optoelectronic features. The electronic structure, optical, and transport features of novel Zn2SeX ternary (X=S, Te) semiconductors are investigated by employing the widely used density functional theory. Based on the band structure investigation, these materials were anticipated tohave a direct energy gap. The results demonstrated that direct energy losses were caused by the orbitals hybridization of S-p and the Se/Te-d in both materials. Compared to Zn2SeTe, Zn2SeS has a wider band gap at the Γ-point, meaning that electrons will have a lower effective mass and atoms possess a greater effective mass. The elements of the complex dielectric function and the significant optical properties were explored for potential use in optoelectronic applications. The unique peaks in I(ω) confirm extensive absorption in the UV range. They may be employed as very effective ultraviolet-reflecting materials based on the peaks in the reflection spectrum that have been observed. Since both materials positive Seebeck coefficient display p-type conductivity over the whole temperature range.

Manipulating Orbital Hybridization of CoSe2 by S Doping for the Highly Active Catalytic Effect of Lithium-Sulfur Batteries.

In recent years, various transition metal compounds have been extensively studied to deal with the problems of slow reaction kinetics and the shuttle effect of lithium-sulfur (Li-S) batteries. Nevertheless, their catalytic performance still needs to be further improved by enhancing intrinsic catalytic activity and enriching active sites. Doping is an effective means to boost the catalytic performance through adjusting the electron structure of the catalysts. Herein, the electron structure of CoSe2 is adjusted by doping P, S with different p electron numbers and electronegativity. After S doping (S-CoSe2), the content of Co2+ increases, and charge is redistributed. Furthermore, more electrons are transferred between Li2S4/Li2S and S-CoSe2, and optimal Co-S bonds are formed between them with optimized d-p orbital hybridization, making the bonds of Li2S4/Li2S the longest and easy to break and decompose. Consequently, the Li-S batteries with the S-CoSe2-modified separator achieve improved rate performance and cycling performance, benefiting from the better bidirectional catalytic activity. This work will provide reference for the selection of the anion doping element to enhance the catalytic effect of transition metal compounds.

4d-2p-4f Gradient Orbital Coupling Enables Tandem Catalysis for Simultaneous Abatement of N2O and CO on Atomically Dispersed Rh/CeO2 Catalyst.

N2O and CO coexist in various industrial and mobile sources. The synergistic reaction of N2O and CO to generate N2 and CO2 has garnered significant research interest, but it remains extremely challenging. Herein, we constructed an atomically dispersed Rh-supported CeO2 catalyst with asymmetric Rh-O-Ce sites through gradient Rh 4d-O 2p-Ce 4f orbital coupling. This design effectively regulates the 4f electron states of Ce and promotes the electron filling of the O 3π* antibonding orbital to facilitate N-O bond cleavage. Near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) reveals that CO reacts with the surface-adsorbed O* generated by N2O decomposition through self-tandem catalysis, accelerating the rate-limiting step in N2O decomposition and activating the synergistic reaction of N2O and CO at temperatures as low as 115 °C. This work can guide the development of high-performance catalysts using the strategy of high-order orbital hybridization combined with the tandem concept to achieve versatile catalytic applications.

Post-functionalization of alternating π-conjugated copolymers containing fluorene moieties via anodic chlorination using AlCl3

AbstractFluorene (Fl) derivatives are representative emitting motifs; thus, they are often installed into alternating π-conjugated copolymers (P(Fl-Ar)) as soluble polymeric emitters. Many researchers have focused on modifying the combined arylene units in P(Fl-Ar) derivatives to tune their optoelectronic properties; however, P(Fl-Ar) derivatives that contain fluorene units with functional groups at their sp2 carbons remain limited. Here, we synthesize P(Fl-Ar) derivatives comprising sp2-chlorinated fluorene units via anodic chlorination using aluminum chloride (AlCl3). The introduced chlorine atoms affect the optoelectronic properties of the pristine P(Fl-Ar) derivatives. Compared with the precursor P(Fl-Ar) derivatives, chlorinated P(Fl-Ar) derivatives exhibit longer maximum emission wavelengths.