Health Hazard Assessment Research Articles

A framework for the environmental, health and safety hazard assessment for amine-based post combustion CO2 capture

Given the environmental concerns driving process developments and considering the size and scale of potential application of post combustion capture (PCC), it is important to fully understand process hazards. In this work we present an environmental, health and safety (EHS) hazard assessment framework for screening and comparing amine based PCC options. A multi-criteria assessment compares the performance of 7m Monoethanolamine (MEA), 4m Diethanolamine (DEA), 10m Diglycolamine (DGA), 8m Piperazine (PZ) and a blend of 7m Methyldiethanolamine (MDEA) with 2m PZ under a set of different process conditions. The EHS assessment takes into account varying circulating volumes, process conditions and potential for solvent degradation. The EHS assessment is also compared with operating costs and life cycle assessment (LCA) metrics. The EHS assessment is carried out on two levels. The first is less data intensive and provides a unified score that can be used to compare and screen process alternatives, while the second level studies the contribution of individual degradation products to different EHS hazard categories in detail. Results of the parametric study show that lean loading is an influential factor in determining first level EHS scores, process costs and environmental impacts and a trade-off is observed between EHS and LCA scores for some of the solvents. In the second level EHS assessment, the parent amine heavily influences most mass dependent hazard categories such as the fire/explosion, acute toxicity and air mediated effects category. Heat stable salts affect the solid waste category. Most degradation products are considered corrosive or irritant and therefore feature strongly in that category in addition to the parent amine. The second level EHS assessment is complemented with workplace exposure analysis to ensure the compliance with workplace threshold limits. Nitrosamines stand out for acute and chronic toxicity effects and are therefore used as an example to demonstrate the workplace exposure. Workplace amines and nitrosamine concentrations are estimated to assess long and potential short term worker exposure as a result of gas leakages and spills respectively. Indoor ventilation rates are inadequate to keep workplace amine and nitrosamine concentrations below the recommended guidelines. To reduce short term exposure effects, a steady state liquid nitrosamine concentration lower than 13.7mM is required. The results of the parametric study show that changing process conditions can lower nitrosamine concentrations, but can also shift the contribution of the parent amine and degradation products of the other hazard categories and affect LCA metrics. The sensitivity of the EHS and LCA results to model assumptions and conditions are tested by varying inlet NOx, expected aerosols and solvent degradation levels. Low NOx levels in the flue gas are required for PZ and MDEA-PZ systems to meet the nitrosamine concentration thresholds for environmental and health concerns. This study also highlights the need to consider hazard effects during early process design phases, identifies degradation related data gaps and critical process parameters towards more environmentally benign PCC design.

Identifying Chemical Groups for Biomonitoring.

Summary:Regulatory agencies face daunting challenges identifying emerging chemical hazards because of the large number of chemicals in commerce and limited data on exposure and toxicology. Evaluating one chemical at a time is inefficient and can lead to replacement with uncharacterized chemicals or chemicals with structural features already linked to toxicity. The Office of Environmental Health Hazard Assessment (OEHHA) has developed a process for constructing and assessing chemical groups for potential biomonitoring in California. We screen for chemicals with significant exposure potential and propose possible chemical groups, based on structure and function. To support formal consideration of these groups by Biomonitoring California’s Scientific Guidance Panel, we conduct a detailed review of exposure and toxicity data and examine the likelihood of detection in biological samples. To date, 12 chemical groups have been constructed and added to the pool of chemicals that can be selected for Biomonitoring California studies, including p,p´-bisphenols, brominated and chlorinated organic compounds used as flame retardants, non-halogenated aromatic phosphates, and synthetic polycyclic musks. Evaluating chemical groups, rather than individual chemicals, is an efficient way to respond to shifts in chemical use and the emergence of new chemicals. This strategy can enable earlier identification of important chemicals for monitoring and intervention.

Acoustic reflexes are common but not pervasive: evidence from the National Health and Nutrition Examination Survey, 1999–2012

Objective: To determine whether acoustic reflexes are pervasive (i.e. sufficiently prevalent to provide 95% confidence of at least 95% prevalence) and might be invoked in damage-risk criteria (DRC) and health hazard assessments (HHA) for impulsive noise.Design: Cross-sectional analyses of a nationally-representative study.Study sample: National Health and Nutrition Examination Survey (NHANES) data collected between 1999 and 2012 were used. Over 60 thousand reflex traces obtained from 15,106 NHANES participants were used in the study, along with demographic, audiometric, health and exposure variables obtained in that study.Results: Acoustic reflexes were not sufficiently prevalent to be deemed pervasive by any detection method or in any subgroup defined by age or audiometric characteristics. The odds of observing acoustic reflexes were greater for women, young adults, and people with better hearing sensitivity. Abnormally high tympanometric admittance and “Other” race/ethnicity (i.e. people who do not self-identify as exclusively Non-Hispanic White, Non-Hispanic Black, Mexican–American, or Hispanic) were associated with lower odds.Conclusions: Acoustic reflexes are not sufficiently prevalent to be included in DRC and HHA for impulsive noise.

Effective radium-226 concentration in rocks, soils, plants and bones

Abstract Effective radium-226 concentration, EC Ra , is the product of radium activity concentration, C Ra , multiplied by the emanation coefficient, E , which is probability of producing a radon-222 atom in the pore spaces. It is measured by accumulation experiments in the laboratory, achieved routinely for a sample mass >50 g using scintillation flasks to measure the radon concentration. We report on 3370 EC Ra values obtained from more than 11 800 such experiments. Rocks ( n =1351) have a mean EC Ra value of 1.9±0.1 Bq kg −1 (90% of data in the range 0.11–35 Bq kg −1 ), while soils ( n =1524) have a mean EC Ra value of 7.5±0.2 Bq kg −1 (90% of data between 1.4 and 28 Bq kg −1 ). Using this large dataset, we establish that the spatial structure of EC Ra is meaningful in geology or sedimentology. For plants ( n =85), EC Ra is generally <1 Bq kg −1 , but values of larger than 10 Bq kg −1 are also observed. Dedicated experiments were performed to measure emanation, E , in plants, and we obtained values of 0.86±0.04 compared with 0.24±0.04 for sands, which leads to estimates of the radium-226 soil-to-plant transfer ratio. For most measured animal bones ( n =26), EC Ra is >1 Bq kg −1 . Therefore, EC Ra appears essential for radon modelling, health hazard assessment and also in evaluating the transfer of radium-226 to the biosphere.

Radon-222 from different sources of water and the assessment of health hazard.

Water samples collected from different sources were analysed for radon concentrations in order to evaluate the health effect associated with radon in water. The radon concentrations were in the range of 3.56-98.57, 0.88-25.49, 0.73-1.35 and 0.24-1.03 Bq.L-1 for borehole, well, packaged and utility water, respectively. Samples from boreholes had the highest radon concentrations with about 67% being higher than the threshold value of 11.1 Bq.L-1 recommended by the USEPA. The mean annual effective dose (AED) due to ingestion for adult, child and infant ranged from 8.71 × 10-3 to 0.831 mSv.y-1 for the different sources. The mean AED calculated for consuming water from boreholes and wells for the three age groups were higher than the recommended reference dose level of 0.1 mSv.y-1. The mean AED due to inhalation of radon in drinking water was negligible, ranging from 0.13 to 6.20 μSv.y-1. The health burden associated with radon in water in the study is through ingestion of water directly from boreholes.

Human health risks from heavy metals in fish of Buriganga river, Bangladesh

Heavy metals are known to cause deleterious effects on human health through food chain. Human health risks were evaluated from consumption of heavy metal contaminated fish from Buriganga River in Bangladesh. Whole body of five fish species (Puntius ticto, Puntius sophore, Puntius chola, Labeo rohita and Glossogobius giuris) were analyzed which contained various concentrations of Cd, As, Pb, Cr, Ni, Zn, Se, Cu, Mo, Mn, Sb, Ba, V and Ag. Concentrations of Mn, Zn, Se and Pb in all fish species were above the Food Safety Guideline (FSG) by WHO/FAO. Assessment of noncarcinogenic health hazard by target hazard quotient (THQ) indicated no concern from consumption of these fish except for Mn. However, all metals together may affect human health as revealed by hazard index (HI). The target cancer risk (TR) values suggested carcinogenic risk from Ni and As. Taken together it can be concluded that there is potential human health risk in consuming fish from river Buriganga.

Thoughts on MIL-STD-1474E noise limits

Department of Defense Design Criteria Standard Noise Limits (MIL-STD-1474E), published in 2015, is a standard developed for the acquisition of military materiel specifies the maximum permissible noise levels produced by military systems and the test requirements for measuring these levels. It is intended for use by equipment designers and manufacturers, covering typical operational conditions and provides noise limits shall not be exceeded if the materiel is to be acceptable to the procuring activity. It is not intended to be used for health hazard assessments for personnel exposed to impulsive noises. Appendix B established the acquisition requirements for impulsive noise limits. Oddly, the standard allows the use of two different methods, although the U.S. Army must use a method that utilizes the Auditory Hazard Assessment Algorithm for Humans. This paper describes some obstacles in using this appendix for acquisition of weapons systems, including the curious use of two completely different methods for ...

Natural compounds in dietary supplements: Female reproductive health hazard assessment in vitro

Natural compounds in dietary supplements: Female reproductive health hazard assessment in vitro

Contamination level and human health hazard assessment of heavy metals and polycyclic aromatic hydrocarbons (PAHs) in street dust deposited in Mahshahr, southwest of Iran

ABSTRACTMahshahr has a strategic position and is considered as industrial hub of Iran. Selected heavy metals and polycyclic aromatic hydrocarbons (PAHs) contamination and health risk, and the mineralogical composition of street dust from Mahshahr were investigated. Results indicated that geology is the main determinant of the dust mineralogical composition. Calculated enrichment factor (EF) and principal component analysis (PCA) showed that Pb, Hg, Zn, and Cu accumulations are greatly influenced by anthropogenic sources including traffic and industry. High heavy metals content poses great ecological risk in the study area and exposure doses revealed that ingestion is the main exposure route to street dust, especially for children in residential/commercial areas. It was found that the total amount of PAHs (∑PAHs) varies from 161 to 1996 µg/kg, dominated by four-ring PAHs. Diagnostic ratios and PCA showed that both petrogenic and pyrogenic sources of PAHs in Mahshahr street dust and traffic play important roles in this respect. Furthermore, toxic equivalents and incremental lifetime cancer risk of PAHs in street dust indicated a high potential carcinogenic risk for inhabitants mainly via dermal contact and ingestion pathways particularly for outdoor workers in industrial use scenario. Finally, distribution maps of total hazard index of heavy metals and cancer risk of PAHs indicated the most impacted zones for different groups and use scenarios.

Comparative ecotoxicology study of two neoteric solvents: Imidazolium ionic liquid vs. glycerol derivative

In this study we have compared the acute ecotoxicity of two solvents, with very different structure and origin, but sharing many physical-chemical properties, so they can be used for similar purposes; a well-known ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) and a solvent partially derived from biomass, 3-bis(2,2,2-trifluoroethoxy)propan-2-ol (BTFIP). We have used three biomodels (Vibrio fischeri, Daphnia magna and Danio rerio) and performed the comparison applying the Environmental, Health and Safety (EHS) hazard assessment. According to the results, ecotoxicity of [BMIM][PF6] and BTFIP is quite similar in the simplest model Vibrio fischeri, while in Daphnia magna [BMIM][PF6] is clearly more toxic. However, in Danio rerio, toxicity of these chemicals is again quite similar and both can be classified as “nontoxic”. The higher index value of [BMIM][PF6] in water mediate effect in the EHS assessment indicates that this ionic liquid is more dangerous than BTFIP, although accumulation and degradation properties have not been taken into account. Further studies will be necessary to ascertain these conclusions.

Distribution of natural radionuclides and radiation level measurements in Karnataka State, India: an overview

The exposure of human beings to ionizing radiation from natural sources is a continuing and inescapable feature of life on earth. A large number of natural radioactivity measurements were conducted throughout world, in order to know their distribution and to assess their radiological health hazards. In this regard, considerable studies have been conducted by different research groups in Karnataka state and more data are reported. In this article, all the studies of natural radioactivity measurements have been combined and reviewed. The majority of the reported articles are about monitoring, distribution and assessment of the radiological health hazards of naturally occurring radionuclides.

Assessment of human health hazards associated with the dietary exposure to organic and inorganic contaminants through the consumption of fishery products in Spain

In this work we have evaluated the potential carcinogenic and acutely toxic risks associated to the exposure to highly prevalent organic and inorganic contaminants through the consumption of fishery products by the Spanish population. The concentrations of 8 organochlorine pesticides (OCPs), 18 polychlorinated biphenils (PCBs), 7 polycyclic aromatic hydrocarbons (expressed as benzo[a]pyrene toxic equivalents (B[a]Peq)), and three inorganic toxic elements [arsenic (As), cadmium (Cd), and mercury (Hg)] were determined in 93 samples of the most consumed species of white fish, blue fish, cephalopods and seafood species, which were acquired directly in markets and supermarkets in the Canary Islands, Spain. The chemical concentration data were combined with the pattern of consumption of these foodstuffs in order to calculate the daily intake of these contaminants, and on this basis the risk quotients for carcinogenicity and acute toxicity were determined for Spanish adults and children. Our results showed that the daily intake of OCPs, PCBs and B[a]Peq, which is associated to blue fish consumption was the highest within the fish group. The estimated intake of pollutants can be considered low or very low for the individual contaminants, when compared to reference values, except in the case of HCB and As. All the estimated intakes were below the reported Tolerable Daily Intakes. Considering the additive effects of multiple contaminants, the risk of acute toxic effects can also be considered as low or very low. However, our results reflect that the current consumption of white fish in adults and children, and also the blue fish in the case of adults, poses a moderate carcinogenic risk to Spanish consumers, mainly related to their concentrations of As. The conclusions of this research may be useful for the design of appropriate risk communication campaigns.

Accounting for data variability, a key factor in in vivo/in vitro relationships: application to the skin sensitization potency (in vivo LLNA versus in vitro DPRA) example.

When searching for alternative methods to animal testing, confidently rescaling an in vitro result to the corresponding in vivo classification is still a challenging problem. Although one of the most important factors affecting good correlation is sample characteristics, they are very rarely integrated into correlation studies. Usually, in these studies, it is implicitly assumed that both compared values are error-free numbers, which they are not. In this work, we propose a general methodology to analyze and integrate data variability and thus confidence estimation when rescaling from one test to another. The methodology is demonstrated through the case study of rescaling the in vitro Direct Peptide Reactivity Assay (DPRA) reactivity to the in vivo Local Lymph Node Assay (LLNA) skin sensitization potency classifications. In a first step, a comprehensive statistical analysis evaluating the reliability and variability of LLNA and DPRA as such was done. These results allowed us to link the concept of gray zones and confidence probability, which in turn represents a new perspective for a more precise knowledge of the classification of chemicals within their in vivo OR in vitro test. Next, the novelty and practical value of our methodology introducing variability into the threshold optimization between the in vitro AND in vivo test resides in the fact that it attributes a confidence probability to the predicted classification. The methodology, classification and screening approach presented in this study are not restricted to skin sensitization only. They could be helpful also for fate, toxicity and health hazard assessment where plenty of in vitro and in chemico assays and/or QSARs models are available. Copyright © 2016 John Wiley & Sons, Ltd.

Application of disease burden to quantitative assessment of health hazards for a decentralized water reuse system

The aim of this article is to introduce the methodology of disease burden (DB) to quantify the health impact of microbial regrowth during wastewater reuse, using the case study of a decentralized water reuse system in Xi'an Si-yuan University, located in Xi'an, China. Based on field investigation findings, Escherichia coli (E. coli), Salmonella and rotavirus were selected as typical regrowth pathogens causing potential health hazards during the reuse of reclaimed water. Subsequently, major exposure routes including sprinkler irrigation, landscape fountains and toilet flushing were identified. Mathematical models were established to build the relationship between exposure dose and disease burden by calculating the disability adjusted life year (DALY). Results of disease burden for this case study show that DALYs attributed to E. coli were significantly greater than those caused by other pathogens, and DALYs associated with sprinkler irrigation were higher than those originating from other routes. A correlation between exposure dose and disease was obtained by introducing a modified calculation of morbidity, which can extend the assessment endpoint of health risk to disease burden from the conventional infection rate.

How credible are the study results? Evaluating and applying internal validity tools to literature-based assessments of environmental health hazards

Environmental health hazard assessments are routinely relied upon for public health decision-making. The evidence base used in these assessments is typically developed from a collection of diverse sources of information of varying quality. It is critical that literature-based evaluations consider the credibility of individual studies used to reach conclusions through consistent, transparent and accepted methods. Systematic review procedures address study credibility by assessing internal validity or “risk of bias” — the assessment of whether the design and conduct of a study compromised the credibility of the link between exposure/intervention and outcome. This paper describes the commonalities and differences in risk-of-bias methods developed or used by five groups that conduct or provide methodological input for performing environmental health hazard assessments: the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) Working Group, the Navigation Guide, the National Toxicology Program's (NTP) Office of Health Assessment and Translation (OHAT) and Office of the Report on Carcinogens (ORoC), and the Integrated Risk Information System of the U.S. Environmental Protection Agency (EPA-IRIS). Each of these groups have been developing and applying rigorous assessment methods for integrating across a heterogeneous collection of human and animal studies to inform conclusions on potential environmental health hazards. There is substantial consistency across the groups in the consideration of risk-of-bias issues or “domains” for assessing observational human studies. There is a similar overlap in terms of domains addressed for animal studies; however, the groups differ in the relative emphasis placed on different aspects of risk of bias. Future directions for the continued harmonization and improvement of these methods are also discussed.

Contribution of ionic silver to genotoxic potential of nanosilver in human liver HepG2 and colon Caco2 cells evaluated by the cytokinesis-block micronucleus assay.

Extensive human exposure to food- and cosmetics-related consumer products containing nanosilver is of public concern because of the lack of information about their safety. Genotoxicity is an important endpoint for the safety and health hazard assessment of regulated products including nanomaterials. The in vitro cytokinesis-block micronucleus (CBMN) assay is a very useful test for predictive genotoxicity testing. Recently, we have reported the genotoxicity of 20 nm nanosilver in human liver HepG2 and colon Caco2 cells evaluated using the CBMN assay. The objective of our present study was three-fold: (i) to evaluate if HepG2 and Caco2 cells are valuable in vitro models for rapid genotoxicity screening of nanosilver; (ii) to test the hypothesis that the nanoparticle size and cell types are critical determinants of its genotoxicity; and (iii) to determine if ionic silver contributes to the nanosilver genotoxicity. With these objectives in mind, we evaluated the genotoxic potential of 50 nm nanosilver of the same shape, composition, surface charge, obtained from the same commercial source, under the same experimental conditions and the same genotoxic CBMN endpoint used for the previously tested 20 nm silver. The ionic silver (silver acetate) was also evaluated under the same conditions. Results of our study show that up to the concentrations tested in these cell types, the smaller (20 nm) nanosilver induces micronucleus formation in both the cell types but the larger (50 nm) nanosilver and the ionic silver provide a much weaker response compared with controls under the same conditions.

Assessment of Occupational Health Safety and Hazard among Government Health Workers in Ondo City, Southwest Nigeria

Assessment of Occupational Health Safety and Hazard among Government Health Workers in Ondo City, Southwest Nigeria

Метод многофакторной оценки вредности и опасности биологического фактора на железнодорожном транспорте

Метод многофакторной оценки вредности и опасности биологического фактора на железнодорожном транспорте

Indoor radon monitoring in the Mandi district of Himachal Pradesh, India, for health hazard assessment

In the present study, indoor radon equilibrium equivalent concentration monitoring was carried out using Solid-State Nuclear Track Detectors in some residential areas of the Mandi district, Himachal Pradesh, India. The average value of the indoor radon equilibrium equivalent concentration in the study area was found to be 94 Bq m -3 , with an annual effective dose of 1.61 mSv. The average value of the indoor radon equilibrium equivalent concentration in the studied areas was found to be higher than the world average indoor radon value of 40 Bq m -3 but lower than the value of the action level 300 Bq m -3 , except for two locations.

Variation of airborne quartz in air of Beijing during the Asia-Pacific Economic Cooperation Economic Leaders' Meeting

Quartz particles are a toxic component of airborne particulate matter (PM). Quartz concentrations were analyzed by X-ray diffraction in eighty-seven airborne PM samples collected from three locations in Beijing before, during, and after the Asia-Pacific Economic Cooperation (APEC) Leaders’ Meeting in 2014. The results showed that the mean concentrations of quartz in PM samples from the two urban sites were considerably higher than those from the rural site. The quartz concentrations in samples collected after the APEC meeting, when the pollution restriction lever was lifted, were higher than those in the samples collected before or during the APEC meeting. The quartz concentrations ranged from 0.97 to 13.2μg/m3, which were among the highest values amid those reported from other countries. The highest quartz concentration exceeded the Californian Office of Environmental Health Hazard Assessment reference exposure level and was close to the occupational threshold limit values for occupational settings. Moreover, a correlation analysis showed that quartz concentrations were positively correlated with concentrations of pollution parameters PM10, PM2.5, SO2 and NOx, but were negatively correlated with O3 concentration. The results suggest that the airborne quartz particles may potentially pose health risks to the general population of Beijing.