Practical Aspects Research Articles

Deep Eutectic Solvents as Agents for Improving the Solubility of Edaravone: Experimental and Theoretical Considerations.

In this study, both practical and theoretical aspects of the solubility of edaravone (EDA) in Deep Eutectic Solvents (DESs) were considered. The solubility of edaravone in some media, including water, can be limited, which creates the need for new efficient and environmentally safe solvents. The solubility of EDA was measured spectrophotometrically and the complex intermolecular interactions within the systems were studied with the COSMO-RS framework. Of the four studied DES systems, three outperformed the most efficient classical organic solvent, namely dichloromethane, with the DES comprising choline chloride and triethylene glycol, acting as hydrogen bond donor (HBD), in a 1:2 molar proportion yielding the highest solubility of EDA. Interestingly, the addition of a specific amount of water further increased EDA solubility. Theoretical analysis revealed that in pure water or solutions with high water content, EDA stacking is responsible for self-aggregation and lower solubility. On the other hand, the presence of HBDs leads to the formation of intermolecular clusters with EDA, reducing self-aggregation. However, in the presence of a stoichiometric amount of water, a three-molecular EDA-HBD-water complex is formed, which explains why water can also act as a co-solvent. The high probability of formation of this type of complexes is related to the high affinity of the components, which exceeds all other possible complexes.

The future of healthcare: green transformational leadership and GHRM’s role in sustainable performance

PurposeOrganizations have increasingly been compelled to engage in ecological businesses in recent decades, necessitating identifying environmental practices contributing to enhanced sustainability. One of the main reasons for doing this research is to see how far down the path to green transformational leadership (GTFL) in Green Human Resource Management (GHRM) practices in the healthcare industry in Pakistan. Additionally, this research aims to analyze how this change affects the long-term success of businesses in sustainable performance (SP).Design/methodology/approachTo identify factors related to the study variables, the research utilized master journals, as well as the Web of Science and Scopus databases. The ISM-DEMATEL (Interpretive Structural Modeling - Decision Making Trial and Evaluation Laboratory) technique was employed to establish a hierarchical model. This model facilitated the identification of cause-and-effect relationships among factors, which were further elucidated using the DEMATEL interrelationship diagram.FindingsThe analysis of the results indicates that Green Training (F4), Green Job Analysis (F1), Intellectual Stimulation (F10), and Green Product Innovation (F9) are the primary factors that have a significant impact on achieving Environmental Policies and Regulations (F13), and Subjective Environment Norms (F14) of SP factors.Research limitations/implicationsThe study is implemented in the healthcare industry of Pakistan, with a focus on practical and managerial aspects. It encourages managers to develop and adapt their human resources policies and environmental strategies. Implementing safety health standards is crucial to mitigate the detrimental effects on the environment. The research was carried out during the period of the pandemic. The scope of this study was restricted to the healthcare industry in Pakistan.Originality/valueIn order to improve SP, this study presents a unique strategy combining sustainability into decision-making procedures with the function of GTFL in GHRM. Implementing safety health standards is crucial to mitigate the detrimental effects on the environment.

Texting, teens, and parental challenges in practices of family socialization

AbstractThis article examines how parent–teen texting enables family members to construct family relations and negotiate behavioral and communicative norms while being apart. The analyses of family texting focus on how teenagers and parents deal with issues of teenage independence and how this involves situated negotiations of teenagers being constructed as either able or unable to live up to family norms and the family's communication culture. Based on the analyses, I argue that digitally mediated interactions complement co‐present contexts of family socialization and influence the relation between power‐ and solidarity‐oriented aspects of everyday socialization practices, for instance, by blurring the boundaries between parental care and control.

Theoretical Framework and Research Proposal for Energy Utilization, Conservation, Production, and Intelligent Systems in Tropical Island Zero-Carbon Building

This study aims to theoretically explore the technological systems of tropical island zero-carbon building (TIZCB) to scientifically understand the characteristics of these buildings in terms of energy utilization, energy conservation, energy production, and intelligent system mechanisms. The purpose is to address the inefficiencies and resource wastage caused by the traditional segmented approach to building energy consumption management. Thus, it seeks to achieve a comprehensive understanding and application of the zero-carbon building (ZCB) technology system. This article focuses on the demands for energy-efficient comfort and innovative industrialization in construction. Through an analysis of the characteristics of TIZCB and an explanation of their concepts, it establishes a theoretical framework for examining the system mechanisms of these buildings. Additionally, it delves into the energy utilization, energy conservation, energy production, and intelligent system from macro, meso, and micro perspectives. This approach results in the development of an implementation strategy for studying the mechanisms of energy usage, conservation, and intelligent production systems in TIZCB. The results show that: (1) this study delves into the theoretical underpinnings of TIZCB, emphasizing their evolution from a foundation of low-carbon and near-zero energy consumption. The primary goal is to achieve zero carbon emissions during building operation, with reliance on renewable energy sources. Design considerations prioritize adaptation to high-temperature and high-humidity conditions, integrating regional culture along with the utilization of new materials and technologies. (2) A comprehensive technical framework for TIZCB is proposed, encompassing energy utilization, conservation, production capacity, and intelligent systems. Drawing from systems theory, control theory, and synergy theory, the research employs a macro–meso–micro analytical framework, offering extensive theoretical support for the practical aspects of design and optimization. (3) The research implementation plan establishes parameterized models, unveiling the intricate relationships with building performance. It provides optimized intelligent system design parameters for economically viable zero-carbon operations. This study contributes theoretical and practical support for the sustainable development of TIZCB and aligns with the dual carbon strategy in China and the clean energy free trade zone construction in Hainan.

Practical aspects of applying artificial intelligence in metrology

Practical aspects of applying artificial intelligence in metrology

PRACTICAL ASPECT OF NUTRITIONAL SUPPORT FOR WOUND-HEALING PATIENTS : A COMPREHENSIVE SYSTEMATIC REVIEW

Background: The skin is the largest organ system whose primary function is to serve as a barrier to protect the body against foreign microbes and noxious substances. Skin integrity and function require macro and micronutrients for cell turnover to maintain homeostasis, and support new growth, and repair, especially in the event of injury or decreased integrity. Wound healing is an important focus of care across all settings, not limited to any particular condition or age group. Achieving optimal healing requires an understanding of nutritional requirements, and these need to be adapted to the setting and incorporated into a care plan. The aim: The aim of this study to show about practical aspect of nutritional support for wound healing patients. Methods: By the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) 2020, this study was able to show that it met all of the requirements. This search approach, publications that came out between 2014 and 2024 were taken into account. Several different online reference sources, like Pubmed, SagePub, and Google Scholar were used to do this. It was decided not to take into account review pieces, works that had already been published, or works that were only half done. Result: In the PubMed databasethe results of our search get 40 articles, whereas the results of our search on SagePub get 448 articles, on Google Scholar 4060 articles. Records remove before screening are 3376, so we get 1172 articles fos screening. After we screened based on record exclude, we compiled a total of 10 papers. We included five research that met the criteria. Conclusion: Nutrition is influential in wound healing, and some key nutrients extend their benefits to aesthetic outcomes. Several studies have shown associations between nutritional deficits and suboptimal wound healing outcomes. However, the current corpus of evidence remains rather generalized.

Design, Simulation, Building, and Testing of a Microcontroller-Based Automatic Drowsiness Detection, Vehicle Braking, and Alert System

Aims: The premier practical aspect of this research drive is to propose, build, simulate, and evaluate an Arduino-built automatic vehicle driver drowsiness detection and alert system.
 Study Design: The pivotal role of a reliable braking system in vehicular safety cannot be overstated, particularly considering the escalating frequency of traffic accidents, notably prevalent in Indonesia where human factors take center stage as the primary accident catalyst. An insightful poll underscores physical fatigue or drowsiness while driving as the foremost concern. Acknowledging the nuanced disparities between conventional air systems and electric systems, this research strategically directs its attention toward crafting a new system characteristic that mirrors the efficiency of the existing systems.
 Place and Period of Study: The research action engaged by the authors in a bunch of two students under the command of a professor as a part of one of his course capstone projects for the Bachelor of Science in Electrical and Electronic Engineering degree at the American International University Bangladesh (AIUB), Dhaka, Bangladesh. The authors performed their investigative tasks at AIUB from June 2023 to January 2024.
 Methodology: Recognizing the imperative to fortify vehicular safety, the integration of artificial intelligence emerges as a vital solution to assist drivers in ensuring the safety of individuals both within and outside the vehicle. This focused study, tailored specifically for Electric Vehicles (EVs), centers on the innovative application of object and distance identification methodologies to provide a comprehensive braking action indicator. Leveraging a minicomputer and a sophisticated neural network approach, images captured by a stereo camera undergo meticulous machine learning processes. This facilitates the precise categorization and measurement of distances between objects, with subsequent priority decisions determining the optimal degree of braking action. Employing an intelligent methodology, specifically fuzzy logic, the study demonstrates a successful outcome by constructing a curve while concurrently enhancing the dynamics of the pre-existing system. Moreover, a finely tuned Pulse Width Modulation (PWM) signal for braking, lasting 10 milliseconds, is intricately devised based on the study's discerning results.
 Results: The system is simulated in Proteus and tested in real time to check its functionality. The outcomes of the test showed that the system can produce the appropriate signals based on the detection of any kind of driver’s drowsiness and can stop the car.
 Conclusion: This comprehensive approach ensures the seamless replacement of components while concurrently elevating the overall performance of the braking system

When interprofessionalism also involves the patient: how to provide good healthcare beyond care

The prevalence of aging-related chronic diseases makes it necessary to change organizational structures. In order to facilitate the transformation of health systems, interprofessional care teams, patient engagement, and collaborative practice will be necessary. Patient-centered interprofessional care is a process based on the collaborative relationship between healthcare professionals, patients and caregivers, as a useful strategy to “develop a shared understanding of the problem and generate a mutually acceptable assessment and management of the care plan”. Everything must take place on a collaborative level, always respecting the different skills. Although the literature provides preliminary information to support the benefits of the patient-centered approach, transformational leadership and an organizational culture are needed to foster learning, research, and the implementation of innovative models to patient care. Furthermore, in the Italian healthcare reality, the aspects of practicability and “sustainability” of this model of care should be considered and the key elements, mechanisms and stages of development necessary for its possible implementation should be better defined.

Sustainable Gender Equality: A Comparative Perspective on STEM Education and Employment in Jordan

Gender equality is a concept that is synonymous with debates towards economic and societal advancement, as manifested through the United Nation’s Sustainable Development Goal 5. This study sets out to identify the key indicators driving gender equality in Science, Technology, Engineering, and Mathematics (STEM) education and employment in Jordan. This area is both critical and timely in light of emerging challenges facing technological advancement, progressive economies, and wider societal inclusion strategies within the professional environment. This study predominantly employs a quantitative methodology, utilising a survey to evaluate and rank a comprehensive set of indicators/challenges associated with gender equality in the published literature. Feedback is gathered from both male and female participants. The findings of this study reveal certain categories and indicators that are highly ranked compared with others, with practical aspects such as workplace conditions and professional treatment, societal norms and gender stereotypes, and professional perceptions and underlying gender bias being more predominant in Jordan. This study also revealed differing challenges facing gender equality in employment compared with the ones faced in education. This finding resonates with the historical trajectory of academic progress in STEM fields in Jordan, and its divergence emphasises the need for a nuanced exploration to advance gender equality in STEM effectively.

Development of Problem-Based Tools to Improve Thinking Abilities in In-Service PPG Program Students

This research aims to develop problem-based learning tools that empower students' thinking abilities in the In-service Teacher Professional Education Program at Unima. The learning tools developed consist of modules and LKPD for the Biology Learning Tool Development course. The development model used is the ADDIE development model consisting of four stages, namely 1) analysis, 2) design, 3) development, 4) implementation, and 5) evaluation. The results of the research are the feasibility of the learning tools which are seen based on the aspects of validity, practicality, and effectiveness of the learning tools. Next, to see the effectiveness of problem-based learning tools on thinking ability using One Group Pretest-Posttest Design which was implemented on 29 PPG Daljab Category 1 students, class 3 of 2023. The results of the research show that the learning tools are very valid with an assessment score interval between 3.5-4 and reliability between 95%-98%. The learning implementation is categorized as very good with an assessment score interval between 3.6-4 with an average reliability of 97%, the average readability level of the device based on the Gunning Fox index is 11 with medium criteria, the readability percentage of the learning device based on the readability sheet of the learning device is 97% and students provide a positive response to learning tools was 98%. The increase in students' cognitive learning outcomes can be seen from the average N-gain value for all students, namely 0.68 with medium criteria, classical completeness of 100%, and indicator completeness with an interval of 2.5-3.5. Based on the results of this research, it can be concluded that problem-based learning tools in the biology teaching tool development course are suitable for use to improve the thinking skills of students in the PPG Daljab Program at Unima.

Simulation in New Zealand: what have you done for me lately? New Zealand Association for Simulation in Healthcare (NZASH) white paper.

Medical simulation has become an integral aspect of modern healthcare education and practice. It has evolved to become an essential aspect of teaching core concepts and skills, common and rare presentations, algorithms and protocols, communication, interpersonal and teamworking skills and testing new equipment and systems. Simulation-based learning (SBL) is useful for the novice to the senior clinician. Healthcare is a complex adaptive system built from very large numbers of mutually interacting subunits (e.g., different professions, departments, equipment). These subunits generate multiple repeated interactions that have the potential to result in rich, collective behaviour that feeds back into the organisation. There is a unique opportunity in New Zealand with the formation of Te Whatu Ora - Health New Zealand and Te Aka Whai Ora - Māori Health Authority and the reorganisation of the healthcare system. This viewpoint is a white paper for the integration of SBL into our healthcare system. We describe our concerns in the current system and list our current capabilities. The way SBL could be implemented in pre- and post-registration phases of practice are explored as well as the integration of communication and culture. Interprofessional education has been shown to improve outcomes and is best done with an interprofessional simulation curriculum. We describe ways that simulation is currently used in our system and describe other uses such as quality improvement, safety and systems engineering and integration. The aim of this viewpoint is to alert Te Whatu Ora and Te Aka Whai Ora of the existing infrastructure of the simulation community in New Zealand and encourage them to invest in its future.

Utilizing Generative Adversarial Networks Using a Category of Fuzzy-Based Structural Similarity Indices for Constructing Datasets in Meteorology

Machine learning and image processing are closely related fields that have undergone major development and application in recent years. Machine learning algorithms are being used to develop sophisticated techniques for analyzing and interpreting images, such as object detection, image classification, and image segmentation. One important aspect of image processing is the ability to compare and measure the similarity between different images by providing a way to quantify the similarity between images using various features such as contrast, luminance, and structure. Generally, the flexibility of similarity measures enables fine-tuning the comparison process to achieve the desired outcomes. This is while the existing similarity measures are not flexible enough to address diverse and comprehensive practical aspects. To this end, we utilize triangular norms (t-norms) to construct an inclusive class of similarity measures in this article. As is well-known, each t-norm possesses distinctive attributes that allow for novel interpretations of image similarities. The proposed class of t-norm-based structural similarity measures offers numerous options for decisionmakers to consider various issues and interpret results more broadly in line with their objectives. For more details, in the Experiments section, the proposed method is applied to grayscale and binarized images and a specific experiment related to meteorology. Eventually, the presented diverse case studies confirm the efficiency and key features of the t-norm-based structural similarity.

How can health be more effective in peace works in Turkey: introducing peace through health

ABSTRACT Peace through Health (PtH), developed in practice in the 1980s and conceptualized soon after by international institutions and scholars, has become a field focusing on the unique role of health in making, building and promoting peace. PtH advocates that health professionals, the actors of PtH, should play an active role in any peace process and should, therefore, be trained accordingly. There is, however, no agreed and established training which addresses PtH for health professionals. It is because each particular type of violence, which is the opposite of peace in the Galtungian sense, and the conditions and the geography in which it takes place have different characteristics. This paper attempts to examine the theoretical and practical aspects of PtH in Turkey and to lead the development of systematic training for PtH in the country. Considering that an advanced health system in the country stands out in the international arena, it is necessary to develop interdisciplinary modules as a part of this for the Turkish tertiary curricula.

The effects of a synthetic epidermis spray on secondary intention wound healing in adult horses.

To evaluate secondary intention wound healing in the horse's limbs when treated with the synthetic epidermis spray (Novacika®, Cohesive S.A.S, France) or with a standard bandaging technique. Six Standardbred mares were included in the study. Four 2.5 x 2.5 cm full-thickness skin wounds were created on each thoracic limb. Two wounds were located on the dorsoproximal aspect of the cannon bone and the other two at the dorsoproximal aspect of the fetlock. Six hours after creation, wounds were randomly treated with synthetic epidermis spray or standard bandaging. The wounds were assessed every 4 days by gross visual assessment and using a 3D imaging camera. Analysis was performed with a 3D imaging application. Out of 46 wounds, 22 showed exuberant granulation tissue and were part of the standard bandaging group. Whether the wounds were treated with synthetic epidermis spray or standard bandaging, the time for healing was the same. The synthetic epidermis spray studied in this model has allowed healing without the production of exuberant granulation tissue but did not reduce the median wound healing time compared to a standard bandaging technique. The synthetic epidermis spray is potentially an interesting alternative for the management of secondary intention wound healing of superficial and non-infected distal limb wounds in adult horses on economical and practical aspects. However, all statistical inference (p-values especially) must be interpreted with caution, given the size of the sample.

Pengembangan Job Sheet Programmable Logic Controller (PLC) Berbasis Logo Softcomfort Untuk Kelas XII SMK Negeri 1 Pungging

This study aims to determine the level of feasibility assessed from the aspects of validity, practicality, and effectiveness of the PLC-based Logo Softcomfort Job Sheet. Development utilized the Research and Development (R&D) research method. This study employed a one-group pretest-posttest design and was conducted on 34 students of XII TITL 1 class. The research employed a validation instrument for the job sheet, with practicality assessed through student responses, and the effectiveness measured through the cognitive pre-test and posttest scores of students. The results indicate that the job sheet's validity yielded a rating of 94.19, categorized as "very valid." The practicality of the PLC job sheet resulted in a rating of 91.35, categorized as "very practical." Regarding the effectiveness of the PLC job sheet on cognitive learning outcomes, it resulted in a calculated t-value of 18.738, with a critical t-value (df = 66, α = 0.05) of 1.997, obtaining a significance value of 0.000. Based on these findings, the PLC job sheet based on Softcomfort can be considered valid, practical, and effective for use in IML learning at SMK Negeri 1 Pungging.
 

Nurses Knowledge regarding Blood transfusion in Hayatabad Medical Complex, Peshawar

Background: Blood transfusion is a critical and life-saving procedure in medical practice, necessitating high levels of knowledge and competency among healthcare providers, particularly nurses, to ensure patient safety and minimize risks associated with transfusion. Despite its importance, gaps in knowledge and training among nursing professionals can significantly impact the quality of care and patient outcomes. Objective: This study aimed to assess the knowledge of nurses regarding blood transfusion practices at a tertiary care hospital in Peshawar and to identify educational gaps that could be addressed to improve the safety and efficacy of transfusion services. Methods: A cross-sectional descriptive study was conducted among Registered Nurses working at Hayatabad Medical Complex, Peshawar. A total of 206 nurses were recruited using convenience sampling. The blood transfusion knowledge questionnaire, adapted from previous studies with modifications to include demographic questions and specific queries related to blood transfusion, was used for data collection. Statistical analysis was performed using SPSS version 25, focusing on calculating means, standard deviations, frequencies, and percentages. Results: The study found that 63.60% of the participants were female, and the majority (52.4%) were aged between 31 to 40 years. Regarding blood transfusion practices, 89.3% correctly identified the use of a blood transport box for transporting blood from the blood bank to the ward. Furthermore, 90.77% acknowledged checking the details on the bag label and blood request form as the first step in collecting a blood bag. However, the study highlighted a moderate level of overall knowledge about blood transfusion among nurses, with significant gaps in training and education noted. Conclusion: The findings suggest that while nurses at the tertiary care hospital in Peshawar have a reasonable understanding of some aspects of blood transfusion practices, there is a clear need for enhanced training programs and the inclusion of comprehensive transfusion medicine education in nursing curricula. Addressing these gaps is essential for improving patient safety and the overall quality of care in transfusion services.

Empowering Bumiputra SMEs Through Intellectual Capital: Lessons from a Developing Nation

Small and medium-sized enterprises (SMEs) play a vital role in the economic development of countries by contributing to the expansion of the export sector's GDP, generating a significant number of employment opportunities, and promoting the development of social infrastructure. Despite their crucial role, SMEs in Malaysia have not received sufficient attention in terms of intellectual capital research. This study aims to address this gap in the current literature by examining the intellectual capital of Bumiputra SMEs in a developing country. The primary objective of this study is to assess the impact of intellectual capital components on the performance of Bumiputra SMEs. The data gathering process will involve qualitative techniques, specifically NVivo-facilitated interview sessions. The insights derived from these sessions will provide SME firm owners with a comprehensive understanding of how intellectual capital influences company performance, empowering them to make informed decisions. This study relies on two firm owners as the main sources of information during the interview sessions. The findings reveal that various elements of intellectual capital, such as human capital, structural capital, customer capital, social capital, technological capital, and spiritual capital, significantly influence the commercial performance of Bumiputra SME entrepreneurs. The study's conclusions have a notable and positive impact on the theoretical and practical aspects of Bumiputra SME businesses by expanding the understanding of how intellectual capital serves as a strategic asset for SMEs and by incorporating resource-based, knowledge-based, and social capital frameworks. The decision of employing only a small number of participants was determined by limitations on time, money, and accessibility. Nevertheless, only a small number of representations can yield significant results, particularly in qualitative studies where data accuracy and breadth are crucial.

Analyzing the Variances in Perspectives on BIM Implementation among Korea AEC Participants

The goals and benefits of implementing building information modeling (BIM) in different facilities are comparable, although there are variations in the employed technologies. Nevertheless, when considering the practical aspects of BIM, the specific variations in implementing BIM across different facilities lack clarity. This study investigated the variations in viewpoints among participants in the architecture, engineering, and construction (AEC) industry regarding the adoption of BIM. The objective was to assess the necessity of developing diverse BIM application strategies based on the specific needs of AEC facilities. The following outlines the investigative process: (1) The survey questions were structured as items that necessitate prior investigation and consultation of BIM execution plans from prominent countries. (2) Appropriate statistical tests were chosen to analyze the correlation between respondents’ information and the questions. (3) The findings of the analysis conducted on the group of respondents were deliberated. The survey revealed that strategic variations are essential for the implementation of space for meetings in a technical setting, the formulation of data standards and BIM team for a cooperative environment, and the assessment of subjects based on the type of facility. Specifically, client-specified common data environments exhibited variations in the responsibilities of participants, while the assignment of BIM coordinators also displayed differences in participant roles, depending on the type of facilities involved. Nevertheless, all participants were in complete agreement regarding the collaborative environment, technical environment, organizational structure, implementation guide, and the necessity for evaluation. Surveys of the perceptions of these AEC participants help identify factors that may hinder collaboration in advance and assist in adjusting communication and collaboration strategies. The BIM implementation strategy, which considers variations depending on the type of facility and the role of participants, facilitates seamless collaboration throughout the project and helps establish forward-thinking guidelines for BIM operations from the standpoint of the client and governance.

Subject and Classroom-based Teacher Forums in the Realm of Teacher Professionalism in Indonesia

The demands of education in today’s world undeniably requires the presence of professional teachers who are knowledgeable, skillful, independent, creative, innovative, visionary, and character. This premise accentuates that teachers at all level of education need to acquire at least four main competences: professional, pedagogic, social, and personal. These main competences would enable them to perform current expected teaching demands. The article employs theories of professional development and social constructivist learning in which social and practical aspects of learning and teaching are taken into account. It draws on personal observations, reflections on current events, and experience of the authors while taking into accounts some empirical findings of researchers in the field of education. Given the central role of professional teachers in the era of industrial revolution 4.0, the article discusses three main issues in regards to current teaching and learning realms: a) teacher professionalism; b) challenges to teaching profession in contemporary world and how teachers deal with them; and c) urgency for effective Subject-based Teacher Forum - STF and Classroom-based Teachers Work Group - CTWG that are expected to support teachers to achieve their professional goals. Hence, the article is expected to provide conceptual and practical information regarding teacher professionalism and its challenges and how STF and CTWG forums support teachers to perform their teaching tasks and responsibilities and overcome the ever-increasing challenges to teaching setting in contemporary educational settings. In particular, the article informs the urgent needs of teachers’ forums which are able to promote teacher professionalism and provide solutions for the improvement of learning and teaching practices in Indonesia.

Practical and Theoretical Aspects of Teaching Methods from the Faculty of Fine Arts in France

In the current changing world, named the era of knowledge explosion, diversity and modernity, art professors and teachers as well as those who have been involved in teaching art in institutions and any related centers have been trying to find out the influence of teaching methods in the field of art. Several studies about practical and theoretical methods of teaching art in French faculties and schools have been undertaken. It is worthy to mention that these methods are very useful to apply in other schools outside of France. Art faculties and schools of Fine Arts dedicate some practical and theoretical methods to teach their required matters perfectly. There are some lectures and exercises that in theoretical and practical actions of the professors whose initial idea is to solve problems on the spot during the process of making artworks. These methods are constantly upgrading after each lecture and exercise to improve the ethods of teaching art at the faculties and schools of Fine Arts. The main objective of this paper is to describe some methods that directly relates to the interactive effect between professors and students. These methods provide an opportunity to develop further teaching methods and the formation of the methodological framework of lectures and exercises. The research handles comparative and descriptive teaching methods as well as academic. The result of this research is one of the possible methodological structures that proposed teaching aids that can be further developed and upgraded to improve teaching at the Faculties and schools of Fine Arts.