Artificial UV Light Research Articles

MICROSTRUCTURE ANALYSIS OF MOSO BAMBOO (Phyllostachys pubescensMAZEL) SURFACE AFTER UV RADIATION

Bamboo material is widely used in outdoor applications. However, they are easily degraded when exposed to sunlight, their smooth surface will gradually turn to rough, and small cracks will appear and finally develop to large cracks. The paper presents a first-time investigation on the microstructure changes in the tangential section of Moso bamboo (Phyllostachys pubescens Mazel) radiated by artificial UV light. The results showed that the cracks mainly appeared at intercellular spaces of fibers where lignin content was high, the parenchyma cell walls and neighbor pits where the cell wall was very thin and more vulnerable than the other parts. In addition, the part of raised area and pit cavity tended to absorb more UV light radiation and showed more and larger cracks than the otherwhere. Cracks at the intercellular spaces of fibers were larger and bigger than those on the parenchyma cell walls. The cracks on the pits of the parenchyma cell walls normally appeared at one pit and then extended to the several surrounding pits. Bordered pits cavity showed more and larger cracks than the pits on the thin wall cells. The simple pits on the thick wall cells and the fiber cells were unaffected by UV radiation.

Photocatalyzed Transformation of Free Carbohydrates

In the growing context of sustainable chemistry, one of the challenges of organic chemists is to develop efficient and environmentally friendly methods for the synthesis of high-added-value products. Heterogeneous photocatalytic transformations have brought revolution in this regard, as they take advantage of an unlimited source of energy (solar light) or artificial UV light to onset organic chemical modifications. The abundance of free carbohydrates as chemical platform feedstock offers a great opportunity to obtain a variety of industrial interest compounds from biomass. Due to their chirality and polyfunctionality, the conversion of sugars generally requires multi-step protocols with protection/deprotection steps and hazardous chemical needs. In this context, several selective and eco-friendly methodologies are currently under development. This review presents a state of art of the recent accomplishments concerning the use of photocatalysts for the transformation and valorization of free carbohydrates. It discusses the approaches leading to the selective oxidation of free sugars, their degradation into organic chemicals, or their use for hydrogen production.

The design of a sunlight-focusing and solar tracking system: A potential application for the degradation of pharmaceuticals in water

Photolysis is considered one of the most important mechanisms for the degradation of pharmaceuticals. Photodecomposition processes to remove pharmaceuticals in water treatment presently use artificial UV light incorporated in advanced oxidation processes. However, UV lighting devices consume a substantial amount of energy and have high operational costs. To develop low energy treatment systems and make good use of abundant sunlight, a natural energy resource as a green technology is needed. As such, a system that combines sunlight focusing, solar tracking and continuous reaction was designed and constructed in the present study, and its application potential as a pharmaceutical water treatment option was tested. Two representative photolabile pharmaceuticals, ciprofloxacin and sulfamethoxazole, were chosen as the target pollutants. The results indicate that the sunlight-focusing system consisting of a UV-enhancing-coated parabolic receiver can concentrate solar energy effectively and hence result in a more than 40% improvement in the direct photolysis efficiency of easily photoconvertible ciprofloxacin. The sunlight-focusing coupled with a solar tracker (SFST) system can improve the sunlight-focusing efficiency by more than 2-fold, thus leading to the maximization of the efficient use of solar energy. Sulfamethoxazole, which is difficult to photoconvert, was successfully degraded by more than 60% compared to direct photolysis through the designed SFST system in the presence of persulfate. The treatment system exhibited good and consistent performance during clear and cloudy days of summer. It is proven that the UV-enhanced coated SFST system with the addition of persulfate indeed has development potential for application in the degradation of pharmaceuticals in water.

UV-light and dietary vitamin D and their effects on ionized calcium and 25-OH-D plasma concentrations in captive gentoo penguins (Pygoscelis papua).

In this study, the effect of ultraviolet (UV) light and dietary vitamin D on calcium metabolism in permanently indoor-housed gentoo penguins (Pygoscelis papua) was investigated. The study consisted of three periods, each completed with blood samples to analyse plasma concentrations of 25-OH-D, 1,25-(OH)2 -D, ionized (iCa) and total calcium (tCa). During the first study period (D), animals were housed under routine conditions without UV-light and fed a diet of different fish species, supplemented with 1,000IU vitamin D per animal and day. The following study period (Baseline) of 28-day duration consisted of the same diet without any vitamin D supplementation and without UV-light. During the study period (UVB) artificial UV-light was added for 3weeks. The vitamin D content of fish was measured by high-performance liquid chromatography. It varied between fish species and between facilities, ranging from no measurable content in capelin (Mallotus villosus) to 7,340IU vitamin D/kg original matter (OM) in herring (Clupea spp). The average dietary vitamin D content was 311IU/kg OM at facility 1 and 6,325IU/kg OM at facility 2, resulting in a vitamin D intake per animal and day without supplementation of 130IU (25.5IU/kg body weight BW) and 2,454IU (438.2IU/kg BW) respectively. The supplementation of vitamin D elevated significantly the plasma concentrations of 25-OH-D by an intraindividual difference of 15 (range -2 to 59)nmol/L and tCa by 0.1 (0.0-0.3) mmol/L only at facility 2. The exposure to UV-light raised the blood concentrations of tCa at facility 2 by 0.15 (0.1-0.2) mmol/L, and of iCa and tCa for females at facility 1 by 0.23 (0.13-0.41) mmol/L and 1.8 (1.1-2.5) mmol/L respectively. No significant influence of the study periods (D) and (UVB) was found for the concentrations of 1,25-(OH)2 -D at both facilities.

A facile method to prepare translucent anatase thin films in monolithic structures for gas stream purification.

In the present work, a facile method to prepare translucent anatase thin films on cellulose acetate monolithic (CAM) structures was developed. A simple sol-gel method was applied to synthesize photoactive TiO2 anatase nanoparticles using tetra-n-butyl titanium as precursor. The immobilization of the photocatalyst on CAM structures was performed by a simple dip-coating method. The translucent anatase thin films allow the UV light penetration through the CAM internal walls. The photocatalytic activity was tested on the degradation of n-decane (model volatile organic compound-VOC) in gas phase, using a tubular lab-scale (irradiated by simulated solar light) and pilot-scale (irradiated by natural solar light or UVA light) reactors packed with TiO2-CAM structures, both equipped with compound parabolic collectors (CPCs). The efficiency of the photocatalytic oxidation (PCO) process in the degradation of n-decane molecules was studied at different operating conditions at lab-scale, such as catalytic bed size (40-160cm), TiO2 film thickness (0.435-0.869μm), feed flow rate (75-300cm3min-1), n-decane feed concentration (44-194ppm), humidity (3 and 40%), oxygen concentration (0 and 21%), and incident UV irradiance (18.9, 29.1, and 38.4WUVm-2). The decontamination of a bioaerosol stream was also evaluated by the PCO process, using Pseudomonas aeruginosa (Gram-negative) and Staphylococcus aureus (Gram-positive) as model bacteria. A pilot-scale unit was operated day and night, using natural sunlight and artificial UV light, to show its performance in the mineralization of n-decane air streams under real outdoor conditions. Graphical abstract Normally graphics abstract are not presented with captions/legend. The diagram is a collection of images that resume the work.

Photocatalytic Efficiency of TiO2 Supported on Raw Red Clay Disks to Discolour Reactive Red 141

In this work, disks containing different amount of the TiO2 precursor impregnated on the raw red clay were produced. The disks were obtained by pressing in metal template and subsequently calcined at 500 °C. The raw clay was used as rigid support to fix the TiO2. The materials were characterized by X-ray diffraction, diffuse reflectance spectroscopy, N2 adsorption-desorption (BET and BJH), scanning electron microscopy, and Fourier transform infrared (FTIR) spectroscopy. The ability of disks to produce superoxide and hydroxyl radicals after photoexcitation with UV irradiation was monitored by EPR. The catalytic efficiency was evaluated by the Reactive Red 141 dye discoloration under artificial UV light and sunlight. The reaction parameters such as concentration of RR-141 and irradiation source were evaluated. The results showed that the disks were able to decolorize 97.5% under sunlight at 60 min. The disks were also efficient in the discoloration until the tenth cycle, resulting in discoloration values near the initial cycles. Additionally, the dye fragments produced in cleavage of molecule during the reaction were evaluated by LC/MS-MS.

Photocatalytic degradation of aniline using an autonomous rotating drum reactor with both solar and UV-C artificial radiation

The aim of this work was to evaluate the performance of a novel self-autonomous reactor technology (capable of working with solar irradiation and artificial UV light) for water treatment using aniline as model compound. This new reactor design overcomes the problems of the external mass transfer effect and the accessibility to photons occurring in traditional reaction systems. The UV-light source is located inside the rotating quartz drums (where TiO2 is immobilized), allowing light to easily reach the water and the TiO2 surface. Several processes (UV, H2O2, Solar, TiO2, Solar/TiO2, Solar/TiO2/H2O2 and UV/Solar/H2O2/TiO2) were tested. The synergy between Solar/H2O2 and Solar/TiO2 processes was quantified to be 40.3% using the pseudo-first-order degradation rate.The apparent photonic efficiency, ζ, was also determined for evaluating light utilization. For the Solar/TiO2/H2O2 process, the efficiency was found to be practically constant (0.638–0.681%) when the film thickness is in the range of 1.67–3.87 μm. However, the efficiency increases up to 2.67% when artificial UV light was used in combination, confirming the efficient design of this installation. Thus, if needed, lamps can be switched on during cloudy days to improve the degradation rate of aniline and its mineralization. Under the optimal conditions selected for the Solar/TiO2/H2O2 process ([H2O2] = 250 mg/L; pH = 4, [TiO2] = 0.65–1.25 mg/cm2), 89.6% of aniline is degraded in 120 min. If the lamps are switched on, aniline is completely degraded in 10 min, reaching 85% of mineralization in 120 min. TiO2 was re-used during 5 reaction cycles without apparent loss in activity (<2%). Quantification of hydroxyl radicals and dissolved oxygen allows a chemical-based explanation of the process. Finally, the UV/Solar/TiO2/H2O2 process was found to have lower operation costs than other systems described in literature (0.67 €/m3).

Erosion as a possible mechanism for the decrease of size of plastic pieces floating in oceans

A sea water wave tank fitted in an artificial UV light weathering chamber was built to study the behaviour of polypropylene (PP) injected pieces in close ocean-like conditions. In air, the same pieces sees a degradation in the bulk with a decrease of mechanical properties, a little change of crystal properties and nearly no change of surface chemistry. Weathering in the sea water wave tank shows only a surface changes, with no effect on crystals or mechanical properties with loss of small pieces of matter in the sub-micron range and a change of surface chemistry. This suggests an erosion dispersion mechanism. Such mechanism could explain why no particle smaller than about one millimeter is found when collecting plastic debris at sea: there are much smaller, eroded from plastic surfaces by a mechano-chemical process similar to the erosion mechanism found in the dispersion of agglomerate under flow.

Polymorphous Light Eruption.

Polymorphous light eruption (PLE) is the commonest immuno-mediated photodermatosis. It occurs after solar or artificial UV-light exposure and affects only the sun-exposed areas with preference of the V-area of the chest, of arms and forearms, legs, upper part of the back, and rarely the face. The lesions are itching or burning, and vary morphologically from erythema to papules, vesico-papules and occasionally blisters, plaques, sometimes erythema multiforme-like, insect bite-like wheals and purpura. The clinical manifestations befall within a few hours to days from light exposure, last a few days, and subside in about a week without sequelae. Its diagnosis is based on history, morphology and phototests. PLE is considered as a delayed hypersensitivity response to newly UV induced, but still unidentified, antigen(s). Usually, MED is normal, but the provocative phototests with UVA or UVB reproduce the spontaneous lesions in about 50% of the patients. Broad spectrum sunscreens and antioxidants, photohardening with PUVA or narrow band UVB may be beneficial to prevent the disease. Therapy is based mainly on topical or systemic corticosteroids.

Enhanced Interfacial Strength and UV Shielding of Aramid Fiber Composites through ZnO Nanoparticle Sizing.

Here, a simple zinc oxide (ZnO) nanoparticle sizing is reported for aramid fibers that simultaneously provides interfacial reinforcement and UV absorption to develop improved fiber-reinforced composites. Through a one-step nanoparticle deposition, the modified aramid fiber showed an increase in interfacial shear strength of 18.9% with the addition of ZnO nanoparticles when tested by single-fiber pullout. The aramid fibers were then treated with a hydrolysis process common to aramid fibers to oxidize the surface and elucidate the importance of oxygen functional groups at the interface. These oxidized fibers proved to further enhance the interface between the fiber surface and nanoparticle, leading to a 33.3% increase relative to the bare fiber. Additionally, due to the absorption properties of ZnO, the retainment of mechanical properties of coated fibers was determined after exposure to an artificial UV light source. After 24 h of exposure, fibers coated with ZnO nanoparticles retained 25% more tensile strength and 21% more modulus than uncoated bare fibers. This work shows that ZnO nanoparticles may serve as a novel, yet simple, multifunctional fiber sizing with which to increase the interfacial strength of aramid fiber composites and improve the resistance to UV irradiation, enabling stronger and more-durable structural fiber composites.

Vitamin D2 enrichment in mushrooms by natural or artificial UV-light during drying

This paper investigates the effect of direct sunlight during natural sun drying and solar drying in a forced convection type solar dryer on vitamin D2 content of brown button mushrooms (Agaricus bisporus). Commercial UVB light, sample processing and drying methods on vitamin D2 content were also studied via different UVB-drying strategies. Mushrooms of the same flush were divided in different groups: i) slices were dried under the sun and in an innovative solar dryer, ii) slices were UVB-treated and dried either by freeze- or convective drying, iii) whole fruit bodies were UVB-treated, sliced and freeze-dried, iv) freeze dried samples were UVB-treated in the form of slices or powder. UVB-treatment of whole mushrooms led to remarkable vitamin D2 enrichment (45 μg/g dry matter), while slicing of mushrooms prior to UVB exposure resulted in a ten-fold increase in D2 content (406 μg/g). UVB light exposure of already dried slices and powder also induced high vitamin D2 generation. Sun-dried and solar-dried mushrooms contained 36 and 39 μg/g dry matter vitamin D2, respectively. Although commercial UVB light boost D2 synthesis in mushrooms, solar drying represents a viable method for the natural formation of ergocalciferol in mushrooms and an excellent vitamin D source for vegans.

Shedding light on the structures of lignin compounds: photo-oxidation under artificial UV light and characterization by high resolution mass spectrometry.

Lignin is the second most abundant natural polymer and a promising alternative energy source for conventional fossil fuels. In this study, we investigated transformations of lignin compounds under artificial UV light conditions at the molecular level. Such light-induced changes of composition profiles in nature after sun exposure have been studied for crude oil in the petroleomics field. We applied a similar high resolution mass spectrometry experimental strategy to lignin and demonstrated various data processing methods to reveal the characteristic differences between the extremely complex data sets of two sample sets, one native control before and one sample after photo-irradiation, using Fourier transform ion cyclotron resonance-mass spectrometry. Graphical abstract Kendrick mass defect versus nominal Kendrick mass for mass spectra of a control and UV-oxidized lignin sample.

Ibuprofen removal by heterogeneous photocatalysis and ecotoxicological evaluation of the treated solutions.

Emerging contaminants including pharmaceuticals are a class of compounds that are causing great concern due to several environmental problems. Conventional water and wastewater treatments do not achieve high removal efficiencies for many of these drugs. Therefore, the present work investigated the removal of ibuprofen (IBP) by heterogeneous photocatalysis using TiO2 irradiated with artificial UV light or solar radiation. The treated solutions were tested against Daphnia similis and Raphidocelis subcapitata, which are species commonly used as bioindicators of environmental conditions. The results indicated that IBP removal reached 92% after 1h of treatment using artificial UV and 1000mgL(-1) of TiO2, which was the optimum catalyst concentration in the range studied (20-1000mgL(-1)). TOC removal reached up to 78% after 60min of treatment using TiO2/artificial UV. Ecotoxicological bioassays indicated that the treated solutions had acute effects, with 30% immobilization of D. similis and 40% growth inhibition of R. subcapitata.

Impact on Vitamin D2, Vitamin D4 and Agaritine in Agaricus bisporus Mushrooms after Artificial and Natural Solar UV Light Exposure.

Commercial mushroom production can expose mushrooms post-harvest to UV light for purposes of vitamin D2 enrichment by converting the naturally occurring provitamin D2 (ergosterol). The objectives of the present study were to artificially simulate solar UV-B doses occurring naturally in Central Europe and to investigate vitamin D2 and vitamin D4 production in sliced Agaricus bisporus (button mushrooms) and to analyse and compare the agaritine content of naturally and artificially UV-irradiated mushrooms. Agaritine was measured for safety aspects even though there is no rationale for a link between UV light exposure and agaritine content. The artificial UV-B dose of 0.53J/cm(2) raised the vitamin D2 content to significantly (P<0.001) higher levels of 67.1±9.9μg/g dry weight (DW) than sun exposure (3.9±0.8μg/g dry DW). We observed a positive correlation between vitamin D4 and vitamin D2 production (r(2)=0.96, P<0.001) after artificial UV irradiation, with vitamin D4 levels ranging from 0 to 20.9μg/g DW. The agaritine content varied widely but remained within normal ranges in all samples. Irrespective of the irradiation source, agaritine dropped dramatically in conjunction with all UV-B doses both artificial and natural solar, probably due to its known instability. The biological action of vitamin D from UV-exposed mushrooms reflects the activity of these two major vitamin D analogues (D2, D4). Vitamin D4 should be analysed and agaritine disregarded in future studies of UV-exposed mushrooms.

Kinetic study of spiramycin removal from aqueous solution using heterogeneous photocatalysis

Spiramycin macrolide antibiotic (SPM) can be photocatalytically degraded on TiO2 (anatase variety). The experiments are done in a batch reactor and the effect of some key parameters is investigated under low energy of artificial UV light. The reaction rate is affected by varying TiO2 dose, pH and SPM concentration. Under optimized conditions, a photodegradation efficiency of 98% is achieved and the SPM photodegradation follows pseudo-first order kinetics. The Langmuir–Hinshelwood (L–H) model is successfully used to fit the experimental data, indicating the dependence of the reaction rate on the chemical reaction step. The L–H model led to the determination of both reaction kinetic and adsorption/desorption equilibrium constants. In order to give an overall estimate of the by-products, chemical oxygen demand, total organic carbon, and calculated average oxidation state monitor the photodegradation process.

The Capacity of Lignin to Enhance the Phthorimaea opercullela Granulovirus (PhopGV) Stability in Laboratory Condition

The lab persistence of Phthorimaea opercullela granulovirus (PhopGV) with and without lignin for egg bioassay with different five virus concentrations (lab experiment- 60, 10, 1.67, 0.28 and 0.046 LE/l 20- 0.015432 LE/l ) to determine the inactivation curve under artificial UVlight, assess the effect and verify the protective capacity of lignin with PhopGV for virus preparations suspensions of raw PhopGV alone and mixed with lignin (1%) used as UV protectants was conducted in simply completely randomised design in the laboratory condition. The LC50 value for PhopGV in lab condition was 1x10-3 LE/l with the slope of the probit regression line 0.51. Similarly, half inactivation speed with lignin was 4.58 days compared to 0.559 days without lignin in lab condition. Inactivation speed was decreased by 87.8 % in case of lignin applied in lab condition. So, the suppression of PTM with virus combined with lignin gave cost effective measures through the use of low dosages. In lab experiment, the control mortality of 19.6 % was probable for all the controls of lignin present and absent. This revealed that there was no effect of lignin alone on target insects’ survival.Int J Appl Sci Biotechnol, Vol 3(2): 256-260 DOI: http://dx.doi.org/10.3126/ijasbt.v3i2.12481

Solar oxidation and removal of arsenic – Key parameters for continuous flow applications

Solar oxidation to remove arsenic from water has previously been investigated as a batch process. This research has investigated the kinetic parameters for the design of a continuous flow solar reactor to remove arsenic from contaminated groundwater supplies. Continuous flow recirculated batch experiments were carried out under artificial UV light to investigate the effect of different parameters on arsenic removal efficiency. Inlet water arsenic concentrations of up to 1000 μg/L were reduced to below 10 μg/L requiring 12 mg/L iron after receiving 12 kJUV/L radiation. Citrate however was somewhat surprisingly found to promote a detrimental effect on the removal process in the continuous flow reactor studies which is contrary to results found in batch scale tests. The impact of other typical water groundwater quality parameters (phosphate and silica) on the process due to their competition with arsenic for photooxidation products revealed a much higher sensitivity to phosphate ions compared to silicate. Other results showed no benefit from the addition of TiO2 photocatalyst but enhanced arsenic removal at higher temperatures up to 40 °C. Overall, these results have indicated the kinetic envelope from which a continuous flow SORAS single pass system could be more confidently designed for a full-scale community groundwater application at a village level.

Impact of Artificial UV-Light on Optical and Protective Effects of Cotton After Washing with Detergent Containing Fluorescent Compounds

Abstract Bleached cotton and polyester/cotton blend fabrics were laundered at 60°C and 90°C with standard ECE detergent with addition of selected fluorescent compounds through 10 cycles. As fluorescent whitening agents for cellulosic materials are most often used in detergents, two types of these were selected – stilbene and biphenyl. UV absorber, a stilbene derivative, as a separate type of fluorescent compounds, was added on its own and in a combination with both types of fluorescent whitening agents. After each laundering cycle cotton and PES/cotton blend fabrics were exposed to artificial light for 60 and 180 minutes. Obtained optical and protective effects were monitored through whiteness degree, remission and Ultraviolet Protection Factor (UPF). Optical effects of cotton fabrics laundered in a detergent containing fluorescent whitening agents of stilbene and biphenyl type exhibit considerable sensitivity to light. It was not found that irradiation reduces the UPF meaning that even decomposition products of fluorescent compounds, created by irradiation, absorb UV radiation as well.

Relevance of a photo-Fenton like technology based on peroxymonosulphate for 17β-estradiol removal from wastewater

Abstract The objective of this work was to evaluate the effectiveness of sulphate radical based homogeneous advanced oxidation technologies (SR-AOTs) involving peroxymonosulphate (PMS) as an oxidant and ferrous iron (Fe(II)) as a catalyst, for the removal of 17β-estradiol (E2) from wastewater effluents collected downstream of a biological WWTP in Perpignan (France). This molecule is used as a surrogate for endocrine disrupting compounds (EDCs) due to its high biological activity at very low concentration levels (ng/L). For this purpose, two different laboratory-scale devices have been employed, one for indoor experiments working with controlled and artificial UV light centered on λ = 365 nm emission, and the other at a larger scale for outdoor experiments using direct solar irradiation. Comparison of kinetic studies with those obtained with commonly used hydroxyl radical based advanced oxidation technologies (HR-AOTs), i.e., UV–Vis/H 2 O 2 /Fe(II) and UV/TiO 2 revealed the higher efficiency of the former over the latter ones. Estrogenicity measurement through bioassays confirmed the complete removal of 17β-estradiol after only a few minutes treatment. Determination of E2 transformation pathways upon sulphate radical reactivity through intermediates identification by mass spectrometry revealed that the oxidation of phenol moiety into quinone might be the main step responsible for the decrease in estrogenicity. UV–Vis/PMS/Fe(II) system appears to be the most suitable method for the treatment of aqueous solutions containing E2.

Safety, functionality and stability tests of Ecklonia cava extract for dermal application

Ecklonia cava demonstrated anti-Propionibacterium acnes and anti-inflammatory activity, without any serious toxic effect, at moderate doses in an in vitro study. However, there has been no in vivo study on dermal application of E. cava extract. We evaluated the safety, functionality, and stability of a cosmetic containing E. cava extract for dermal administration. A cytotoxicity assay revealed no inhibitory effects on cell viability in a mouse leukemic monocyte macrophage cell line (RAW 264.7) after incubation with 100 μg/mL of the E. cava acetone fraction (ECAF) for 24 h. The anti-P. acnes activity of ECAF was not affected by any significant variation in temperature, pH, or exposure to artificial UV light or natural sunlight. ECAF also showed negative reactions in a patch test. No change in appearance, color, or odor was observed in a stability test on an emulsion product with ECAF. On the basis of these results, it is expected that ECAF will be a very useful or applicable raw material for skin goods such as cosmetics for treating or improving acne.