Artificial Photosynthesis System Research Articles

A Sucker‐Reactor Polyoxometalate Assembled Superstructures for Efficient Photocatalytic Nitrogen Fixation

AbstractDesigning a reaction system that integrates reactant capture and transformation in an artificial photosynthesis system to achieve high reaction efficiency remains challenging. Here, an ionic liquid (IL) ‐polyoxometalate (POM) superstructure photocatalyst (P2HPMo) is reported, where the anisotropy of the superstructure is allowed by adjusting the alkyl chain lengths of ILs. Experimental data and theoretical simulation show that ILs and POM serve as the “sucker” and “reactor” of the reaction system to capture and transform the reactants, respectively. In particular, the addition of quaternary phosphorous IL cations is not only conducive to the adsorption of N2 but also effectively promotes the activation of N2 by manipulating the energy band and electronic structure. Consequently, the synthesized P2HPMo exhibits an ammonia synthesis rate of 98 µmol·gcat−1·h−1, which is one of the highest values available in a sacrificial agent‐free system.

Two-photon upconversion photoluminescence in CsPbBr3 nanoplates

The utilization of solar energy by light conversion processes in both natural and artificial photosynthesis systems has become a pivotal means of sustaining a consistent power supply for our daily lives and production. In general, these reactions rely on the visible spectra region where the sun produces abundant energy according to the black body's emission. Further expanding the adoption of the near-infrared (NIR) spectral region through upconversion has become an intelligent strategy to improve the entire utilization rate of solar energy. In this work, the two-photon upconversion (TPUC) properties were discovered in CsPbBr3 nanoplates (NPs) emitted at 450 nm, and a sub-gap energy level was observed to serve as the center to facilitate the upconversion process. The excitation threshold for TPUC is drastically lower than that for the two-photon absorption, another nonlinear upconversion path that requires strengthened excitation power. Moreover, a significant negative correlation between the excitation threshold for TPUC in the CsPbBr3 NPs and the exciton binding energy was unveiled, which could be attributed to the enhanced quantum confinement effects. Our work paved the way for a feasible way to expand the utilization of the NIR spectral region in light conversion applications.

Construction of An Artificial Photosynthesis System with A Single CdS QDs-Ferritin Hybrid Molecule.

Establishing artificial photosynthesis systems in a simple but effective manner to mitigate the greenhouse effect and address the energy crisis remains challenging. The combination of photocatalysis technology with bioengineering is an emerging field with great potential to construct such artificial photosynthesis systems, but so far, it has barely been explored in this area. Herein, an artificial photocatalysis platform is constructed with high CO2 conversion and H2O splitting capability by integration of CdS QDs into the intra-subunit interface of H-type ferritin (Marsupenaeus japonicus), a natural ferroxidase through protein interface redesign. The crystal structure of the synthesized CdS QDs with engineered ferritin molecules as bio-templates confirmed the design at an atomic level. Notably, upon absorbing desirable visible light (≈420nm), such a single CdS-ferritin hybrid molecule is able to selectively catalyze the reduction of CO2 into HCOOH (≈90%), meanwhile catalyzing the oxidation of H2O into O2 in an aqueous environment. The O2 production rate reached to 180µmolg-1h-1, and the HCOOH output hit almost 800µmolg-1h-1. This work advances the utilization of the four-helix bundle structure for crafting artificial photosynthesis systems, facilitating the seamless integration of bioengineering and photocatalysis technology.

Atomically Precise Regulation of the N-Heterocyclic Microenvironment in Triazine Covalent Organic Frameworks for Coenzyme Photocatalytic Regeneration.

Artificial photosynthesis represents a sustainable strategy for accessing high-value chemicals; however, the conversion efficiency is significantly limited by its difficulty in the cycle of coenzymes such as NADH. In this study, we report a series of isostructural triazine covalent organic frameworks (COFs) and explore their N-substituted microenvironment-dependent photocatalytic activity for NADH regeneration. We discovered that the rational alteration of N-heterocyclic species, which are linked to the triazine center through an imine linkage, can significantly regulate both the electron band structure and planarity of a COF layer. This results in different separation efficiencies of the photoinduced electron-hole pairs and electron transfer behavior within and between individual layers. The optimal COF catalyst herein achieves an NADH regeneration capacity of 89% within 20 min, outperforming most of the reported nanomaterial photocatalysts. Based on this, an artificial photosynthesis system is constructed for the green synthesis of a high-value compound, L-glutamate, and its conversion efficiency significantly surpasses the enzymatic approach without the NADH photocatalytic cycle. This work offers new insights into the coenzyme regeneration by means of regulating the distal heterocyclic microenvironment of a COF skeleton, holding great potential for the green photosynthesis of important chemicals.

Exploring the Cooperation of the Redox Non-Innocent Ligand and Di-Cobalt Center for the Water Oxidation Reaction Catalyzed by a Binuclear Complex.

Water oxidation is a crucial reaction in the artificial photosynthesis system. In the present work, density functional calculations were employed to decipher the mechanism of water oxidation catalyzed by a binuclear cobalt complex, which was disclosed to be a homogeneous water oxidation catalyst in pH=7 phosphate buffer. The calculations showed that the catalytic cycle starts from the CoIII,III-OH2 species. Then, a proton-coupled electron transfer followed by a one-electron transfer process leads to the generation of the formal CoIV,IV-OH intermediate. The subsequent PCET produces the active species, namely the formal CoIV,V=O intermediate (4). The oxidation processes mainly occur on the ligand moiety, including the coordinated water moiety, implying a redox non-innocent behavior. Two cobalt centers keep their oxidation states and provide one catalytic center for water activation during the oxidation process. 4 triggers the O-O bond formation via the water nucleophilic attack pathway, in which the phosphate buffer ion functions as the proton acceptor. The O-O bond formation is the rate-limiting step with a calculated total barrier of 17.7 kcal/mol. The last electron oxidation process coupled with an intramolecular electron transfer results in the generation of O2.

A Ni-O-Ag photothermal catalyst enables 103-m2 artificial photosynthesis with >17% solar-to-chemical energy conversion efficiency.

The scalable artificial photosynthesis composed of photovoltaic electrolysis and photothermal catalysis is limited by inefficient photothermal CO2 hydrogenation under weak sunlight irradiation. Herein, NiO nanosheets supported with Ag single atoms [two-dimensional (2D) Ni1Ag0.02O1] are synthesized for photothermal CO2 hydrogenation to achieve 1065 mmol g-1 hour-1 of CO production rate under 1-sun irradiation. This performance is attributed to the coupling effect of Ag-O-Ni sites to enhance the hydrogenation of CO2 and weaken the CO adsorption, resulting in 1434 mmol g-1 hour-1 of CO yield at 300°C. Furthermore, we integrate the 2D Ni1Ag0.02O1-supported photothermal reverse water-gas shift reaction with commercial photovoltaic electrolytic water splitting to construct a 103-m2 scale artificial photosynthesis system (CO2 + H2O → CO + H2 + O2), which achieves more than 22 m3/day of green syngas with an adjustable H2/CO ratio (0.4-3) and a photochemical energy conversion efficiency of >17%. This research charts a promising course for designing practical, natural sunlight-driven artificial photosynthesis systems.

Hollow SrTiO3 photocatalyst with spatially separated OER and HER cocatalysts for photocatalytic overall water splitting

Overcoming the challenge of sluggish charge separation and the concurrent occurrence of overall water splitting (OWS) half reactions at the same catalytic sites is crucial for achieving efficient photocatalysis. This issue often leads to a high recombination rate and the back reaction of OWS. In this study, we addressed this challenge by enhancing interfacial spatial charge separation. Specifically, we designed hollow SrTiO3 spheres and spatially segregated the hydrogen and oxygen evolution sites on the outer and inner surfaces, respectively, for OWS. The spatially distributed Pt/SrTiO3/CoOx catalysts exhibited exceptional separation of photogenerated charges, resulting in 3-times higher stoichiometric OWS compared to Pt/SrTiO3. This work underscores the effectiveness of a well-tailored spatially distributed structure in promoting charge separation in photocatalysis, thereby opening avenues for the development of efficient artificial photosynthesis systems.

Nickel porphyrin/ZnIn2S4 heterojunction with Ni-S highway for boosting charge separation and visible-light-driven H2 production

Due to the exceptional potential to retard the charge recombination, semiconductor-based heterojunctions as photocatalysts have attracted extensive attention. Herein, nickel(II) 5,10,15,20-tetraphenyl-21H,23H-porphyrin (NiTPP) and ZnIn2S4 (ZIS) floriated microspheres are used to construct a novel inorganic-organic heterojunction (NiTPP/ZIS). Compared with the NiTPP and ZIS, the resultant NiTPP/ZIS exhibits enhanced optical absorption, charge separation and photoelectrochemical behavior. Further investigations demonstrate that a type II heterojunction mechanism proceeds in the NiTPP/ZIS heterojunction to boost the charge separation via the Ni-S highway formed between the NiTPP and ZIS components. No need of additional cocatalyst, the NiTPP/ZIS heterojunction with an optimal mass ratio delivers a superior apparent quantum yield of 64.0% at 400 nm and a remarkable H2 evolution activity of 2305 μmol h−1 under visible light (λ ≥ 400 nm) irradiation, 10 and 256 times higher than that of the ZIS and NiTPP alone, respectively. This work presents a new concept for constructing inorganic-organic heterojunctions for high-performance artificial photosynthesis systems.

Near-infrared light-driven asymmetric photolytic reduction of ketone using inorganic-enzyme hybrid biocatalyst

Effective photolytic regeneration of the NAD(P)H cofactor in enzymatic reductions is an important and elusive goal in biocatalysis. It can, in principle, be achieved using a near-infrared light (NIR) driven artificial photosynthesis system employing H2O as the sacrificial reductant. To this end we utilized TiO2/reduced graphene quantum dots (r-GQDs), combined with a novel rhodium electron mediator, to continuously supply NADPH in situ for aldo-keto reductase (AKR) mediated asymmetric reductions under NIR irradiation. This upconversion system, in which the Ti-O-C bonds formed between r-GQDs and TiO2 enabled efficient interfacial charge transfer, was able to regenerate NADPH efficiently in 64 % yield in 105 min. Based on this, the pharmaceutical intermediate (R)-1-(3,5-bis(trifluoromethyl)phenyl)ethan-1-ol was obtained, in 84 % yield and 99.98 % ee, by reduction of the corresponding ketone. The photo-enzymatic system is recyclable with a polymeric electron mediator, which maintained 66 % of its original catalytic efficiency and excellent enantioselectivity (99.9 % ee) after 6 cycles.

Hetero-Motif Molecular Junction Photocatalysts: A New Frontier in Artificial Photosynthesis.

ConspectusTo cope with the increasingly global greenhouse effect and energy shortage, it is urgent to develop a feasible means to convert anthropogenic excess carbon dioxide (CO2) into energy resources. The photocatalytic CO2 reduction reaction (CO2RR) coupled with the water oxidation reaction (WOR), known as artificial photosynthesis, is a green, clean, and promoting strategy to deal with the above issues. Among the reported photocatalytic systems for CO2 reduction, the main challenge is to achieve WOR simultaneously due to the limited charge separation efficiency and complicated dynamic process. To address the problem, scientists have assembled two nanosemiconductor motifs for CO2RR and WOR into a heterojunction photocatalyst to realize artificial photosynthesis. However, it is difficult to clearly explore the corresponding catalytic mechanism and establish an accurate structure-activity relationship at the molecular level for their aperiodic distribution and complicated structural information. Standing on the shoulders of the heterojunction photocatalysts, a new-generation material, hetero-motif molecular junction (HMMJ) photocatalysts, has been developed and studied by our laboratory. A hetero-motif molecular junction is a class of crystalline materials with a well-defined and periodic structure, adjustable assembly mode, and semiconductor-like properties, which is composed of two predesigned motifs with oxidation and reduction, respectively, by coordination or covalent bonds. The intrinsic properties make these catalysts susceptible to functional modifications to improve light absorption and electrical conductivity. The small size and short distance of the motifs can greatly promote the efficiency of photogenerated electron-hole separation and migration. Based on these advantages, they can be used as potential excellent photocatalysts for artificial photosynthesis. Notably, the explicit structural information determined by single-crystal or powder X-ray diffraction can provide a visual platform to explore the reaction mechanism. More importantly, the connection number, spatial distance, interaction, and arrangement mode of the structural motifs can be well-designed to explore the detailed structure-activity relationship that can be hardly studied in nanoheterojunction photocatalyst systems. In this regard, HMMJ photocatalysts can be a new frontier in artificial photosynthesis and serve as an important bridge between molecular photocatalysts and solid photocatalysts. Thus, it is very important to summarize the state-of-the-art of the HMMJ photocatalysts used for artificial photosynthesis and to give in-depth insight to promote future development.In this Account, we have summarized the recent advances in artificial photosynthesis using HMMJ photocatalysts, mainly focusing on the results in our lab. We present an overview of current knowledge about developed photocatalytic systems for artificial photosynthesis, introduce the design schemes of the HMMJ photocatalysts and their unique advantages as compared to other photocatalysts, summarize the construction strategies of HMMJ photocatalysts and their application in artificial photosynthesis, and explain why hetero-motif molecular junctions can be promising photocatalysts and show that they provide a powerful platform for studying photocatalysis. The structure-activity relationship and charge separation dynamics are illustrated. Finally, we bring our outlook on present challenges and future development of HMMJ photocatalysts and their potential application prospects on other photocatalytic reaction systems. We believe that this Account will afford important insights for the construction of high-efficiency photocatalysts and guidance for the development of more photocatalytic systems in an atom-economic, environmentally friendly, and sustainable way.

Fabrication of copper porphyrin-ruthenium pincer complex coupled polymer/Cs0.33WO3 Z-scheme composite photocatalyst for highly efficient CO2 conversion

The photocatalytic system that simulates the principle of photosynthesis is considered one of the most promising technologies for converting CO2 into chemical fuels. Herein, copper tetra(4-carboxyphenyl)porphyrin (CuPor)-ruthenium 2,6-bis(5-amino-benzimidazol-2-yl)pyridine pincer complex (RuN3) coupled polymer (CuPor-RuN3) is in-situ polymerized on hexagonal tungsten bronze Cs0.33WO3 (CsWO) nanoparticles to construct a novel CuPor-RuN3/CsWO composite photocatalyst with cascade charge transfer mechanism, where the inorganic–organic Z-scheme heterojunction at the CuPor-RuN3/CsWO interface and the Z-scheme molecular junction (-[CuPor-RuN3]-) within the polymer facilitate photoexcited electrons transferring from CuPor units to RuN3 ones, and finally enriching on Ru sites for boosting the CO2 reduction reaction (CO2RR). Under visible light irradiation and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole serving as electron donor, the resultant CuPor-RuN3/CsWO delivers average CO/CH4 yields up to 4645/89 μmol g-1h−1, corresponding to an overall photoactivity of 10002 μmol g-1h−1, which is 20 times higher than that of the single polymer. These results provide new ideas for exploring high-performance artificial photosynthesis system to convert CO2 into chemical fuels.

Driving tetracycline hydrochloride degradation and concomitant hydrogen peroxide photosynthesis in a neutral environment over sulphur and oxygen codoped carbon nitride

The investigation of an artificial photosynthesis system for contaminant treatment and consecutive hydrogen peroxide formation is imperative but challenging, whereas the conversion efficiency is relatively low and far away from the demand for social development. Herein, oxygen and sulphur were collectively introduced into carbon nitride nanosheets (OSCN), together with sufficient edge and basal plane active sites. The as-synthesized sample could achieve a degradation efficiency of 84% for 100 mg/L tetracycline hydrochloride, together with simultaneous hydrogen peroxide production of 366 μmol g−1 h−1 under environmentally friendly neutral conditions. Intriguingly, the addition of tetracycline hydrochloride can accelerate hydrogen peroxide generation, which thus in turn speed up tetracycline hydrochloride degradation. It was revealed that the optimized electronic structure, promoted light-harvesting, and enhanced charge carriers separation capacity are conducive for the synchronous oxygen reduction and contaminant oxidation procedure in large measure. Furthermore, the degradation and hydrogen peroxide generation can be maintained even after 15 cycles, demonstrating the stability of OSCN and its possibility for practical applications. The degradation pathway and in-deep reaction mechanism are carried out accordingly. Additionally, such a synchronously promoted reaction can be extended to some other pollutants, like phenol and 2,4-dichlorophenol. This interesting work provides a novel strategy for pollutants removal and concurrent hydrogen peroxide generation.

Reasonable design pentamerous artificial photosynthesis system for efficient overall CO2 reduction

Inspired by the photosynthesis of green plants in nature, an artificial photosynthesis system of MF/Co-BWO/CPB-Cu with “root”, “trunk” and “leaf” is designed in this study, realizing efficient overall photocatalytic CO2 reduction reaction (CO2RR). Melamine foam (MF) with strong hydrophilicity and abundant porosity is selected as “root” and “trunk”, which can store and transfer liquid H2O. For the “leaf” design, Bi2WO6 and CsPbBr3 are selected as oxidation and reduction photocatalysts, respectively, which would generate Bi2WO6/CsPbBr3 S-scheme heterojunction. CuS and CoO as reduction and oxidation centers are also introduced into photosynthesis system, respectively. CuS plays an important role in CO2 adsorption and activation, while CoO could promote H2O oxidation and supply proton. Moreover, Co-BWO/CPB-Cu as “leaf” could trigger the “transpiration” from MF via photo-thermal effect, inducing the formation of gas–solid biphase CO2RR system. As a result, the artificial photosynthesis system of MF/Co-BWO/CPB-Cu exhibits the efficient CO2RR efficiency.

Hypoxic environment of wounds and photosynthesis-based oxygen therapy.

The hypoxic environment is among the most important factors that complicates the healing of chronic wounds, such as venous leg ulcers, pressure injuries and diabetic foot ulcers, which seriously affects the quality of life of patients. Various oxygen supply treatments are used in clinical practice to improve the hypoxic environment at the wound site. However, problems still occur, such as insufficient oxygen supply, short oxygen infusion time and potential biosafety risks. In recent years, artificial photosynthetic systems have become a research hotspot in the fields of materials and energy. Photosynthesis is expected to improve the oxygen level at wound sites and promote wound healing because the method provides a continuous oxygen supply and has good biosafety. In this paper, oxygen treatment methods for wounds are reviewed, and the oxygen supply principle and construction of artificial photosynthesis systems are described. Finally, research progress on the photosynthetic oxygen production system to promote wound healing is summarized.

Revolutionizing carbon chemistry: Solar-powered C(sp3)-N bond activation and CO2 transformation via newly designed SBE-Y cutting-edge dynamic photocatalyst.

A solvent-free sulfur-bridge-eosin-Y (SBE-Y) polymeric framework photocatalyst was prepared for the first time through an insitu thermal polymerization route using elemental sulfur (S8) as a bridge. The addition of a sulfur bridge to the polymeric framework structure resulted in an allowance of the harvesting range of eosin-Y (E-Y) for solar light. This shows that a wider range of solar light can be used by the bridge material's photocatalytic reactions. In this context, supercharged solar spectrum: enhancing light absorption and hole oxidation with sulfur bridges. This suggests that the excited electrons and holes through solar light can contribute to oxidation-reduction reactions more potently. As a result, the photocatalyst-enzyme attached artificial photosynthesis system developed using SBE-Y as a photocatalyst performs exceptionally well, resulting in high 1,4-NADH regeneration (86.81%), followed by its utilization in the exclusive production of formic acid (210.01 μmol) from CO2 and synthesis of fine chemicals with 99.9% conversion yields. The creation of more effective photocatalytic materials for environmental clean-up and other applications that depend on the solar light-driven absorption spectrum of inorganic and organic molecules could be one of the practical ramifications of this research.

Engineering artificial photosynthesis based on rhodopsin for CO2 fixation

Microbial rhodopsin, a significant contributor to sustaining life through light harvesting, holds untapped potential for carbon fixation. Here, we construct an artificial photosynthesis system which combines the proton-pumping ability of rhodopsin with an extracellular electron uptake mechanism, establishing a pathway to drive photoelectrosynthetic CO2 fixation by Ralstonia eutropha (also known as Cupriavidus necator) H16, a facultatively chemolithoautotrophic soil bacterium. R. eutropha is engineered to heterologously express an extracellular electron transfer pathway of Shewanella oneidensis MR-1 and Gloeobacter rhodopsin (GR). Employing GR and the outer-membrane conduit MtrCAB from S. oneidensis, extracellular electrons and GR-driven proton motive force are integrated into R. eutropha’s native electron transport chain (ETC). Inspired by natural photosynthesis, the photoelectrochemical system splits water to supply electrons to R. eutropha via the Mtr outer-membrane route. The light-activated proton pump - GR, supported by canthaxanthin as an antenna, powers ATP synthesis and reverses the ETC to regenerate NADH/NADPH, facilitating R. eutropha’s biomass synthesis from CO2. Overexpression of a carbonic anhydrase further enhances CO2 fixation. This artificial photosynthesis system has the potential to advance the development of efficient photosynthesis, redefining our understanding of the ecological role of microbial rhodopsins in nature.

Near-Infrared Light-Driven Photocatalysis with an Emphasis on Two-Photon Excitation: Concepts, Materials, and Applications.

Efficient utilization of sunlight in photocatalysis is widely recognized as a promising solution for addressing the growing energy demand and environmental issues resulting from fossil fuel consumption. Recently, there have been significant developments in various near-infrared (NIR) light-harvesting systems for artificial photosynthesis and photocatalytic environmental remediation. This review provides an overview of the most recent advancements in the utilization of NIR light through the creation of novel nanostructured materials and molecular photosensitizers, as well as modulating strategies to enhance the photocatalytic processes. A special focus is given to the emerging two-photon excitation NIR photocatalysis. The unique features and limitations of different systems are critically evaluated. In particular, it highlights the advantages of utilizing NIR light and two-photon excitation compared to UV-visible irradiation and one-photon excitation. Ongoing challenges and potential solutions for the future exploration of NIR light-responsive materials are also discussed.

Harvesting electrons and holes from photodriven symmetry-breaking charge separation within a perylenediimide photosynthetic model dimer.

Understanding how to utilize symmetry-breaking charge separation (SB-CS) offers a path toward increasingly efficient light-harvesting technologies. This process plays a central role in the first step of photosynthesis, in which the dimeric "special pair" of the photosynthetic reaction center enters a coherent SB-CS state after photoexcitation. Previous research on SB-CS in both biological and synthetic chromophore dimers has focused on increasing the efficiency of light-driven processes. In a chromophore dimer undergoing SB-CS, the energy of the radical ion pair product is nearly isoenergetic with that of the lowest excited singlet (S1) state of the dimer. This means that very little energy is lost from the absorbed photon. In principle, the relatively high energy electron and hole generated by SB-CS within the chromophore dimer can each be transferred to adjacent charge acceptors to extend the lifetime of the electron-hole pair, which can increase the efficiency of solar energy conversion. To investigate this possibility, we have designed a bis-perylenediimide cyclophane (mPDI2) covalently linked to a secondary electron donor, peri-xanthenoxanthene (PXX) and a secondary electron acceptor, partially fluorinated naphthalenediimide (FNDI). Upon selective photoexcitation of mPDI2, transient absorption spectroscopy shows that mPDI2 undergoes SB-CS, followed by two secondary charge transfer reactions to generate a PXX•+-mPDI2-FNDI•- radical ion pair having a nearly 3 µs lifetime. This strategy has the potential to increase the efficiency of molecular systems for artificial photosynthesis and photovoltaics.

Enhanced performance of molecular electrocatalysts for CO2 reduction in a flow cell following K+ addition.

Electrocatalytic CO2 reduction is a key aspect of artificial photosynthesis systems designed to produce fuels. Although some molecular catalysts have good performance for CO2 reduction, these compounds also suffer from poor durability and energy efficiency. The present work demonstrates the improved CO2 reduction activity exhibited by molecular catalysts in a flow cell. These catalysts were composed of a cobalt-tetrapyridino-porphyrazine complex supported on carbon black together with potassium salt and were both stable and efficient. These systems were found to promote electrocatalytic CO2 reduction with a current density of 100 mA/cm2 and generated CO over at least 1 week with a selectivity of approximately 95%. The optimal catalyst gave a turnover number of 3,800,000 and an energy conversion efficiency of more than 62% even at 200 mA/cm2.

Rhombohedral boron monosulfide as a metal-free photocatalyst

Most of previous photocatalysts contain metal species, thus exploring a metal-free photocatalyst is still challenging. A metal-free photocatalyst has an advantage for the development of economical and non-toxic artificial photosynthesis system and/or environmental purification applications. In this study, rhombohedral boron monosulfide (r-BS) was synthesized by a high-pressure solid-state reaction, and its photocatalytic properties were investigated. r-BS absorbed visible light, and its photocurrent action spectrum also exhibited visible light responsivity. The r-BS evolved hydrogen (H2) from water under ultraviolet (UV) as well as under visible light irradiation, and its internal quantum efficiency reached 1.8% under UV light irradiation. In addition to the H2 evolution reaction, the r-BS photocatalyst drove carbon dioxide (CO2) reduction and dye oxidation reactions under UV irradiation. Although bare r-BS was not so stable under strong light irradiation in water, cocatalyst modification improved its stability. These results indicate that r-BS is a new class of non-metal photocatalyst applicable for H2 production, CO2 reduction, and environmental purification reactions.