Artificial Flowers Research Articles

Description and validation of an improved method to feed solitary bees (Osmia spp.) known amounts of pesticides

Pesticide exposure is an important driver of bee declines. Laboratory toxicity tests provide baseline information on the potential effects of pesticides on bees, but current risk assessment schemes rely on one species, the highly social honey bee, Apis mellifera, and there is uncertainty regarding the extent to which this species is a suitable surrogate for other pollinators. For this reason, Osmia cornuta and Osmia bicornis have been proposed as model solitary bee species in the EU risk assessment scheme. The use of solitary bees in risk assessment requires the development of new methodologies adjusted to the biology of these species. For example, oral dosing methods used with honey bees cannot be readily applied to solitary bees due to differences in feeding behaviour and social interactions. In this study, we describe the “petal method”, a laboratory feeding method, and validate its use in acute and chronic exposure oral tests with Osmia spp. We conducted five experiments in which we compared the performance of several artificial flowers combining visual and olfactory cues against the petal method, or in which variations of the petal method were confronted. We then use the results of these experiments to optimize the feeding arenas and propose standardized methods for both acute and chronic exposure tests. The petal method provides high levels of feeding success, thus reducing the number of bees needed. It works with a wide variety of petal species and with both female and male Osmia spp., thus ensuring reproducibility across studies. To validate the use of the petal method in ecotoxicology tests, we assess the toxicity of a standard reference insecticide, dimethoate, in O. cornuta adults and determine LD50 values for this species. The petal method should facilitate the inclusion of solitary bees in risk assessment schemes therefore increasing the protection coverage of pesticide regulation.

Chemical characteristics of artificial plastic plants and the presence of hazardous elements from the recycling of electrical and electronic waste

Because of their convenience, the demand for decorative plastic plants has been increasing over recent years. However, no information exists on the origin or nature of the polymers employed or the type of additives used in order to understand potential environmental impacts and inform safe and sustainable disposal or recycling practices. In this study, 203 parts or offcuts from 175 plastic plants acquired from European shops and venues have been analysed by X-ray fluorescence spectrometry to determine elemental content, while a selection has been analysed by infrared spectrometry to establish polymer type. The (usually green) moulded components (n = 159) were commonly constructed of polyethylene or polypropylene, while leaves and colourful petals (n = 40) were generally made of polyethylene terephthalate fabric that had been glued to the moulded component. However, both components also exhibited evidence of being coated with a resin or adhesive for support, protection or appearance. Barium, Fe, Ti and Zn-based additives were commonly encountered but more important from an environmental and health perspective were variable concentrations of potentially hazardous elements in the moulded parts: namely, Br (6.1 to 108,000 mg kg−1; n = 78), Pb (7.6 to 17,400 mg kg−1; n = 53) and Sb (58.6 to 70,800 mg kg−1; n = 17). These observations suggest that many of the moulded components are derived from recyclates that are contaminated by waste electronic and electrical plastic, introducing brominated flame retardants, the flame retardant synergist, Sb2O3, and Pb into the final product. There are no standards for these chemicals in plastic plants, but regulations for electronic plastic, toy safety and packaging are frequently exceeded or potentially exceeded. Widespread contamination of plastic plants may impose constraints on their recycling and disposal.

Enable Multi-Stimuli-Responsive Biomimetic Actuation with Asymmetric Design of Graphene-Conjugated Conductive Polymer Gradient Film.

In this paper, multiresponsive actuators based on asymmetric design of graphene-conjugated poly(3,4-ethylene dioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) gradient films have been developed by a simple drop casting method. The biomimetic actuation is attributed to the hygroscopic expansion property of PEDOT:PSS and the gradient distribution of graphene sheets within the film, which resembles the hierarchical swelling tissues of some plants in nature. Graphene-conjugated PEDOT:PSS (GCP) actuators exhibit reversible bending behavior under multistimuli such as moisture, organic vapor, electrothermal, and photothermal heating. Noticeably, the bending curvature reaches 2.15 cm-1 under applied voltage as low as 1.5 V owing to the high electrical conductivity of GCP actuator. To mimic the motions of nyctinastic plants, a GCP artificial flower that spreads its petals under sunlight illumination has been fabricated. GCP actuators have been also demonstrated as intelligent light-controlled switches for light-emitting diodes and smart curtains for thermal management. Not only do the GCP gradient films exhibit potential applications in flexible electronics and energy harvesting/storage devices but also the facile fabrication of multiresponsive GCP actuators may shed light on the development of soft robotics, artificial muscles, wearable electronics, and smart sensors.

A Study on Leveraging Unmanned Aerial Vehicle Collaborative Driving and Aerial Photography Systems to Improve the Accuracy of Crop Phenotyping

Unmanned aerial vehicle (UAV)-based aerial images have enabled a prediction of various factors that affect crop growth. However, the single UAV system leaves much to be desired; the time lag between images affects the accuracy of crop information, lowers the image registration quality and a maximum flight time of 20–25 min, and limits the mission coverage. A multiple UAV system developed from our previous study was used to resolve the problems centered on image registration, battery duration and to improve the accuracy of crop phenotyping. The system can generate flight routes, perform synchronous flying, and ensure capturing and safety protocol. Artificial paddy plants were used to evaluate the multiple UAV system based on leaf area index (LAI) and crop height measurements. The multiple UAV system exhibited lower error rates on average than the single UAV system, with 13.535% (without wind effects) and 17.729–19.693% (with wind effects) for LAI measurements and 5.714% (without wind effect) and 4.418% (with wind effects) for crop’s height measurements. Moreover, the multiple UAV system reduced the flight time by 66%, demonstrating its ability to overcome battery-related barriers. The developed multiple UAV collaborative system has enormous potential to improve crop growth monitoring by addressing long flight time and low-quality phenotyping issues.

Mirror, mirror on the wall… How tank material and the presence of “enrichments” affect competition and agonism in zebrafish (Danio rerio)

Despite generations of rearing in a laboratory environment, zebrafish (Danio rerio) retain innate preferences for environmental features that mimic their natural habitat (e.g. plants and gravel), but the effects of such preferred housing conditions on agonism are poorly understood. In this study, we worked with > 450 fish in 41 tanks to test two competing hypotheses about body size variation within shoals (a possible proxy for dominance hierarchy strength) and agonistic behaviour: A) the provision of preferred resources increases agonism (relative to levels in empty, barren tanks), possibly due to resource guarding behaviour, and B) barren housing conditions increase agonism (relative to levels in tanks containing preferred resources), possibly because subordinates are less able to hide from dominant fish. In Experiment 1, groups of 11–13 fish were housed for ∼ 1 year in 7 tanks in each of 3 treatments: empty lab-typical tanks, larger empty plastic tanks, and larger “well-resourced” plastic tanks containing preferred resources (gravel and artificial plants). Similarly, in Experiment 2, groups were housed in 5 tanks in each of 4 cross-factored treatments: empty glass aquaria, empty plastic tanks, well-resourced glass aquaria, and well-resourced plastic tanks. Live observations of agonistic behaviours and measures of body size variation (coefficient of variation for standard length and condition factor) were compared between treatments (using GLMs). In Experiment 1, empty lab-typical tanks exhibited significantly more agonistic behaviours than the other two treatment groups, which were not significantly different from each other. In Experiment 2, we found a significant interactive effect of housing treatment and tank material on agonism, where agonistic behaviours occurred most often in empty glass aquaria, possibly due to mirror-like reflections on glass walls. We therefore suggest that reflective surfaces in zebrafish housing systems should be minimized or visually disruptive resources like plants should be added to reduce agonism. Together both experiments also indicate that we need not be hesitant about adding preferred resources to captive zebrafishes’ housing environments, since they likely do not exacerbate agonism (and indeed may even reduce it). We also found two unexpected results: in Experiment 1, shoals exhibiting increased agonism had significantly lower coefficients of variation in standard length and in Experiment 2, fish in barren tanks grew significantly longer than those housed with preferred resources. Possible growth-related hypotheses are discussed and we suggest that high coefficients of variation in body size should not be used to infer high levels of agonism in zebrafish shoals.

Arbuscular mycorrhizal fungi inoculation exerts weak effects on species- and community-level growth traits for invading or native plants under nitrogen deposition

Nitrogen deposition and biological invasion are two major components of global environmental change. Nitrogen deposition has been considered to enhance the resource availability of recipient habitats, which influences the invasiveness of plant invader and the invasibility of recipient native communities. Nitrogen deposition has been shown to reduce the relative abundances of arbuscular mycorrhizal fungi (AMF) globally. AMF have been found to mutualistically symbiose with approximately 75% of plant species and act as a nutrient supplier. AMF may modify the structure of native plant communities, collaborate with alien plant invaders and thus promote their invasion. The alien woody invader, Rhus typhina L. has been introduced into North China as a horticultural species, invaded the native plant community and outperformed the native competitors in growth and in photosynthetic efficiency. Nevertheless, little is known about if nitrogen deposition and AMF inoculation synergistically alter the invasibility of native plant community. In this study, R. typhina was subjected to the artificial plant community assembled by four co-existing native species – Chenopodium album L., Vitex negundo var. heterophylla (Franch.) Rehd., Rhus chinensis Mill. and Acer truncatum Bunge in a mesocosm experiment. Nitrogen deposition and AMF inoculation were simulated as environmental and biotic filters respectively. Aboveground biomass and biomass proportion, reflecting plant growth and performance, and specific leaf area and chlorophyll concentration correlated with carbon use and photosynthetic capacity of both the alien invader and the native plants were measured and calculated after harvest. We found that AMF inoculation did not alter the trait variation of alien and native species to increasing nitrogen deposition level in general, although AMF inoculation impeded the increase of aboveground biomass for C. album, V. negundo and native community with increasing nitrogen deposition level. In the scenario of nitrogen deposition and AMF inoculation, a stable status of invasion dynamic may be maintained and needs to be checked with integration of traits at extended temporal scale.

Using Ecological Stoichimetric Characteristies to Inform Grassland Management in the Karst Desertification Area

C, N and P play an important indicator role in explaining the material cycles and elemental balances of living and non-living systems. In order to control karst rocky desertification, China has established a large number of artificial grasslands for the development of herbivorous animal husbandry, which has played an important role in ecological restoration and economic development. However, the effects of different use patterns on the ecological stoichiometry of the carbon (C), nitrogen (N) and phosphorus (P) of the grassland plant–soil–microorganism are not clear. In this study, the effects of grazing grassland (GG), mowing grassland (MG) and enclosed grassland (EG) on C, N and P and their ecological stoichiometry in the artificial grassland plant–soil–microbe were investigated in the karst desertification control area in Southern China. The results showed that (1) the C content was EG > GG > MG. The N content was GG > EG > MG, while the P content was MG > GG > EG. C:N, C:P and N:P were shown as EG > GG > MG. The plant N:P was more than 20, indicating a P deficiency and limitation, especially in EG. (2) The content of C and P in soil was EG > GG > MG. The N content was GG > EG > MG. The soil C:N showed EG > MG > GG, while C:P and N:P were shown as MG > GG > EG. The soil N:P ratios were all less than 14, indicating that all of them had an obvious N limitation. (3) Soil microbial biomass carbon (MBC) was GG > MG > EG. Soil microbial biomass nitrogen (MBN) was GG > EG > MG. Soil microbial biomass phosphorus (MBP) showed EG > GG > MG. MBC:MBN was MG > EG > GG. MBC:MBP was MG > EG > GG. MBN:MBP was GG > MG > EG. The MBN:MBP in GG and MG was greater than 9.6, which is P-limited, while the MBN:MBP in EG is less than 8.9, which is N-limited. (4) Plant C and N were significantly correlated with soil C and N, but plant P was significantly negatively correlated with soil P, while MBP was significantly positively correlated with soil TP. Soil microorganisms had the tendency to assimilate available P in GG and MG treatments, but the potential of releasing P from mineralized soil organic matter was higher in EG treatment. The results showed that the chemical properties and stoichiometric characteristics of the plant–soil–microorganism were significantly changed by different grassland-use methods, which provided scientific guidance for the management of C, N and P elements and the further optimization of soil microbial environment for artificial grassland in the karst rocky desertification area.

Biomimetic multifunctional dielectric elastomer with color-changing, tunable-stiffness and shape-morphing abilities

Many creatures in the nature can quickly deform their shape and change their color under the stimulation of the external environment. Dielectric elastomer as one of the smart materials interests the scientists for developing biomimetic robots. However, the most dielectric elastomers have single functionality. Herein, an intelligent multifunctional dielectric elastomer with color-changing, tunable stiffness, and shape-morphing abilities is present in this work. To accomplish this material system, the thermochromic microcapsules and well-designed bistable dielectric elastomers actuator were blended. When the high temperature is applied, the material could not only change its color but also decrease its stiffness. The maximum actuation strain over 250% can be achieved at an electric field of 30 V/μm at 50 °C, which is one of the largest deformations compared with the reported materials. To demonstrate the application potential of this material, various biomimetic soft robots such as artificial flowers with color-shifting and blooming, color-shifting leaves, and color-shifting grippers are shown. This work will inspire the design and fabrication of novel biomimetic smart materials with multiple functions.

The role of within-plant variation in nectar production: an experimental approach.

Nectar, a plant reward for pollinators, can be energetically expensive. Hence, a higher investment in nectar production can lead to reduced allocation to other vital functions and/or increased geitonogamous pollination. One possible strategy employed by plants to reduce these costs is to offer variable amounts of nectar among flowers within a plant, to manipulate pollinator behaviour. Using artificial flowers, we tested this hypothesis by examining how pollinator visitation responds to inter- and intra-plant variation in nectar production, assessing how these responses impact the energetic cost per visit. We conducted a 2 × 2 factorial experiment using artificial flowers, with two levels of nectar investment (high and low sugar concentration) and two degrees of intra-plant variation in nectar concentration (coefficient of variation 0 and 20 %). The experimental plants were exposed to visits (number and type) from a captive Bombus impatiens colony, and we recorded the total visitation rate, distinguishing geitonogamous from exogamous visits. Additionally, we calculated two estimators of the energetic cost per visit and examined whether flowers with higher nectar concentrations (richer flowers) attracted more bumblebees. Plants in the variable nectar production treatment (coefficient of variation 20 %) had a greater proportion of flowers visited by pollinators, with higher rates of total, geitonogamous and exogamous visitation, compared with plants with invariable nectar production. When assuming no nectar reabsorption, variable plants incurred a lower cost per visit compared with invariable plants. Moreover, highly rewarding flowers on variable plants had higher rates of pollination visits compared with flowers with few rewards. Intra-plant variation in nectar concentration can represent a mechanism for pollinator manipulation, enabling plants to decrease the energetic costs of the interaction while still ensuring consistent pollinator visitation. However, our findings did not provide support for the hypothesis that intra-plant variation in nectar concentration acts as a mechanism to avoid geitonogamy. Additionally, our results confirmed the hypothesis that increased visitation to variable plants is dependent on the presence of flowers with nectar concentration above the mean.

Mimosa‐Inspired High‐Sensitive and Multi‐Responsive Starch Actuators

AbstractArtificial intelligent actuators are extensively explored for emerging applications such as soft robots, human‐machine interfaces, and biomedical devices. However, intelligent actuating systems based on synthesized polymers suffer from challenges in renewability, sustainability, and safety, while natural polymer‐based actuators show limited capabilities and performances due to the presence of abundant hydrogen‐bond lockers. Here this study reports a new hydrogen bond‐mediated strategy to develop mimosa‐inspired starch actuators (SA). By harnessing the unique features of gelatinization and abundant hydrogen bonds, these SA enable high‐sensitivity and multi‐responsive actuation in various scenarios. The non‐gelatinized SA can be irreversibly programmed into diverse shapes, such as artificial flowers, bowl shapes, and helix structures, using near‐infrared light. Furthermore, the gelatinized SA exhibit reversibly multi‐responsive actuation when exposed to low humidity (10.2%), low temperature (37 °C), or low‐energy light (0.42 W cm−2). More importantly, the SA demonstrate robust applications in smart living, including artificial mimosa, intelligent lampshade, and morphing food. By overcoming the hydrogen‐bond lockers inherent in natural polymers, SA open new avenues for next‐generation recyclable materials and actuators, bringing them closer to practical applications.

Innate preferences of Eristalis tenax L. (Syrphidae) for flower colour, size and symmetry are more intricate than the simple additive model

Abstract Plants have evolved complex flowers that differ in visual traits such as colour, size and shape, to attract pollinators. However, pollinators seem to respond differently to individual traits. Our objective was to unravel the effect of individual traits and their interplay in forming pollinator preferences. We measured the preferences of naive drone flies, Eristalis tenax (Syrphidae), for artificial flowers differing in colour, size and flower symmetry, in controlled conditions to untangle the effects of individual traits on pollinator behaviour. Eristalis tenax showed the highest selectivity for colour, followed by size, and only moderate selectivity in relationship to flower symmetry. Flower colour interacted with flower size, in that yellow colour was generally preferred, particularly when the flowers were large in comparison to other forms. Our results suggest that preferences for flower traits are structured, which might suggest that there have been different evolutionary pressures on individual floral traits.

Bioinspired helical-artificial fibrous muscle structured tubular soft actuators.

Biological tubular actuators show diverse deformations, which allow for sophisticated deformations with well-defined degrees of freedom (DOF). Nonetheless, synthetic active tubular soft actuators largely only exhibit few simple deformations with limited and undesignable DOF. Inspired by 3D fibrous architectures of tubular muscular hydrostats, we devised conceptually new helical-artificial fibrous muscle structured tubular soft actuators (HAFMS-TSAs) with locally tunable molecular orientations, materials, mechanics, and actuation via a modular fabrication platform using a programmable filament winding technique. Unprecedentedly, HAFMS-TSAs can be endowed with 11 different morphing modes through programmable regulation of their 3D helical fibrous architectures. We demonstrate a single "living" artificial plant rationally structured by HAFMS-TSAs exhibiting diverse photoresponsive behaviors that enable adaptive omnidirectional reorientation of its hierarchical 3D structures in the response to environmental irradiation, resembling morphing intelligence of living plants in reacting to changing environments. Our methodology would be significantly beneficial for developing sophisticated soft actuators with designable and tunable DOF.

Effects of Light Intensity and Photoperiod on the Fresh Locking and Quality of Hydroponic Arugula in the Harvesting Period

At present, the research on the light environment of arugula mostly stays in its emergence and growth stage and there is a lack of research on the fresh-keeping quality of hydroponic arugula under light treatment during the harvest period. This study takes hydroponic arugula as the research object and explores the influence of light intensity and photoperiod on the fresh-keeping quality of arugula during the harvest period. With light intensity and photoperiod as experimental factors; and fresh weight, water content, chlorophyll, soluble sugar, nitrate, and cellulose content of arugula during harvest as experimental indicators, combined with sensory evaluation methods, a two-factor completely random experiment was completed. The experimental results show that medium and high intensity light treatment effectively enhances the fresh-keeping ability of arugula during the harvest period, which is conducive to reducing the decline in leaf fresh weight and water content caused by aging of arugula and delaying the decline in quality of arugula; 3 h and 6 h photoperiods can significantly delay the decomposition of chlorophyll in hydroponic arugula during harvest, reduce the loss of soluble sugar, inhibit excessive accumulation of nitrate, and slow down the production of leaf cellulose; and LED red-blue composite light irradiation is conducive to maintaining the sensory quality of hydroponic arugula during harvest. Among them, the sensory quality of cabbage leaves under 200 μmol·m−2·s−1 light intensity and 6 h photoperiod treatment is the best. This study provides an important theoretical basis for improving the quality and yield of hydroponic arugula and provides a strong basis for setting intelligent environmental lighting in artificial light-type plant factories.

A new experimental setup to measure hydraulic conductivity of plant segments.

Plant hydraulic conductivity and its decline under water stress are the focal point of current plant hydraulic research. The common methods of measuring hydraulic conductivity control a pressure gradient to push water through plant samples, submitting them to conditions far away from those that are experienced in nature where flow is suction driven and determined by the leaf water demand. In this paper, we present two methods for measuring hydraulic conductivity under closer to natural conditions, an artificial plant setup and a horizontal syringe pump setup. Both approaches use suction to pull water through a plant sample while dynamically monitoring the flow rate and pressure gradients. The syringe setup presented here allows for controlling and rapidly changing flow and pressure conditions, enabling experimental assessment of rapid plant hydraulic responses to water stress. The setup also allows quantification of dynamic changes in water storage of plant samples. Our tests demonstrate that the syringe pump setup can reproduce hydraulic conductivity values measured using the current standard method based on pushing water under above-atmospheric pressure. Surprisingly, using both the traditional and our new syringe pump setup, we found a positive correlation between changes in flow rate and hydraulic conductivity. Moreover, when flow or pressure conditions were changed rapidly, we found substantial contributions to flow by dynamic and largely reversible changes in the water storage of plant samples. Although the measurements can be performed under sub-atmospheric pressures, it is not possible to subject the samples to negative pressures due to the presence of gas bubbles near the valves and pressure sensors. Regardless, this setup allows for unprecedented insights into the interplay between pressure, flow rate, hydraulic conductivity and water storage in plant segments. This work was performed using an Open Science approach with the original data and analysis to be found at https://doi.org/10.5281/zenodo.7322605.

Responses of sediment nitrogen forms and bacterial communities to different aquatic nitrogen conditions in three submerged macrophyte-type ecological treatment systems

Ecological treatment system (ETS) has been recognized as a promising technology for mitigating agricultural non-point pollution, whereas it remains to be seen how nitrogen (N) forms and bacterial communities in ETS sediments respond to different aquatic N conditions. Therefore, a four-month microcosm experiment was conducted to investigate the effects of three aquatic N conditions (2 mg/L NH4+-N, 2 mg/L NO3−-N and 1 mg/L NH4+-N + 1 mg/L NO3−-N) on sediment N forms and bacterial communities in three ETSs vegetated by Potamogeton malaianus, Vallisneria natans and artificial aquatic plant, respectively. Through analysis of four transferable N fractions, the valence states of N in ion-exchange and weak acid extractable fractions were found to be mainly determined by aquatic N conditions, while significant N accumulation was observed only in strong oxidant extractable and strong alkali extractable fractions. Sediment N profiles were primarily influenced by time and plant types, with N condition having secondary effect, while sediment bacterial community structures experienced a significant shift over time and were slightly influenced by plant types. Sediment functional genes related to N fixation, nitrification, assimilable nitrate reduction, dissimilatory nitrite reduction (DNRA) and denitrification were substantially enriched in month 4, and the bacterial co-occurrence network exhibited less complexity but more stability under NO3− condition compared to others. Furthermore, certain sediment N fractions were found to have strong relationships with specific sediment bacteria, such as nitrifiers, denitrifiers and DNRA bacteria. Our findings highlight the significant influence of aquatic N condition in submerged macrophyte-type ETSs on sediment N forms and bacterial communities.

Stable isotopic analysis of water utilization characteristics of four xerophytic shrubs in the Hobq Desert, Northern China.

Quantitative identification of water utilization characteristics of xerophytic shrubs is an important prerequisite for the selection and optimization of a regional artificial sand-fixing vegetation system. In this study, a hydrogen (δD) stable isotope technique was used to study the changes in water use characteristics of four typical xerophytic shrubs, Caragana korshinskii, Salix psammophila, Artemisia ordosica, and Sabina vulgaris in the Hobq Desert under light (4.8mm after 1 and 5 days) and heavy (22.4mm after 1 and 8 days) rainfall events. Under light rainfall, C. korshinskii and S. psammophila primarily used the 80-140 cm layer of soil water (37-70%) and groundwater (13-29%), and the water use characteristics did not change significantly after the light rainfall event. However, the utilization ratio of A. ordosica to soil water in the 0-40 cm layer increased from less than 10% on the first day after rain to more than 97% on the fifth day after rain, whereas the utilization ratio of S. vulgaris to soil water in the 0-40 cm layer also increased from 43% to nearly 60%. Under heavy rainfall, C. korshinskii and S. psammophila still used the 60-140 cm layer (56-99%) and groundwater (~15%), while the main water utilization depth of A. ordosica and S. vulgaris expanded to 0-100 cm. Based on the above results, C. korshinskii and S. psammophila primarily use the soil moisture of the 80-140 cm layer and groundwater, while A. ordosica and S. vulgaris use the soil moisture of the 0-100 cm layer. Therefore, the co-existence of A. ordosica and S. vulgaris will increase the competition between artificial sand-fixing plants, while the combination of the two plants with C. korshinskii and S. psammophila will avoid competition between artificial sand-fixing plants to some extent. This study provides important guidance for regional vegetation construction and sustainable management of an artificial vegetation system.

Improving the Accuracy of Saffron Adulteration Classification and Quantification through Data Fusion of Thin-Layer Chromatography Imaging and Raman Spectral Analysis.

Agricultural crops of high value are frequently targeted by economic adulteration across the world. Saffron powder, being one of the most expensive spices and colorants on the market, is particularly vulnerable to adulteration with extraneous plant materials or synthetic colorants. However, the current international standard method has several drawbacks, such as being vulnerable to yellow artificial colorant adulteration and requiring tedious laboratory measuring procedures. To address these challenges, we previously developed a portable and versatile method for determining saffron quality using a thin-layer chromatography technique coupled with Raman spectroscopy (TLC-Raman). In this study, our aim was to improve the accuracy of the classification and quantification of adulterants in saffron by utilizing mid-level data fusion of TLC imaging and Raman spectral data. In summary, the featured imaging data and featured Raman data were concatenated into one data matrix. The classification and quantification results of saffron adulterants were compared between the fused data and the analysis based on each individual dataset. The best classification result was obtained from the partial least squares-discriminant analysis (PLS-DA) model developed using the mid-level fusion dataset, which accurately determined saffron with artificial adulterants (red 40 or yellow 5 at 2-10%, w/w) and natural plant adulterants (safflower and turmeric at 20-100%, w/w) with an overall accuracy of 99.52% and 99.20% in the training and validation group, respectively. Regarding quantification analysis, the PLS models built with the fused data block demonstrated improved quantification performance in terms of R2 and root-mean-square errors for most of the PLS models. In conclusion, the present study highlighted the significant potential of fusing TLC imaging data and Raman spectral data to improve saffron classification and quantification accuracy via the mid-level data fusion, which will facilitate rapid and accurate decision-making on site.

Palm Sunday in central Mexico: among sellers, palms and syncretism

BackgroundDomingo de Ramos, or Palm Sunday, is a traditional Christian religious event where devotees use ramos, which are bouquets currently elaborated from palm leaves and other natural elements. In various countries, it is assumed this use of biodiversity leads to the depletion of the species involved. However, other important aspects must be considered, including the role of the people who produce and sell these ramos, the associated symbolism that has been overlooked, as well as commercial aspects that have barely been documented. This ethnobotanical study evaluates the regional-scale cultural, biological and socioeconomic aspects associated with Domingo de Ramos in central Mexico from an emic perspective.MethodsEthnographic and commercial information was obtained through interviews with ramos sellers in 28 municipalities in the state of Hidalgo, Mexico. We specifically sought sociodemographic data regarding the interviewees, as well as information pertaining to the ramos themselves and the palms. These aspects were explored with all of the sellers. The free list method was used to describe the uses and key elements associated with the ramos.ResultsAlthough the ramos are used for religious purposes, they have eight different uses in the daily life of the sellers, the main one being “protection.” They serve to protect families, crops and animals, as well as against several diseases. Likewise, they are considered valuable for diminishing strong storms. This belief in the protection conferred by the ramos preserves pre-Hispanic concepts and is combined with their use in blessing corresponding to Western beliefs. Ramos are made from 35 introduced and native plant species and comprise a base (made of palm, wheat or sotol), a “reliquia” (palm, rosemary, chamomile and laurel) and natural or artificial flowers. The ramos sellers are mostly adult women of indigenous origin and heads of family.ConclusionsThis study of Domingo de Ramos, carried out at a regional scale, highlights a syncretism that is reflected in both the symbolic importance of ramos palm and in the species used, as well as socioeconomic aspects that had not previously been identified in the study area and reflect the occurrence of complex relationships in non-timber forest products that remain little addressed.

ТЕХНОЛОГІЇ ЗАЛУЧЕННЯ УЧНІВСЬКОЇ МОЛОДІ ДО УКРАЇНСЬКИХ ТРАДИЦІЙ ЗАСОБАМИ ЕТНОДИЗАЙНУ

Ethno design as at teaching has deep roots in Ukrainian people’s lifestyle, which are an effective means for aesthetic, humanistic and national education of schoolchildren, this ethno cultural environment become particularly relevant during the development of the New Ukrainian school. Folk crafts vividly reflect and best preserve the traditional educational ideal of the Ukrainian people, which is contained in the works of decorative and applied art, available for students to perceive and understand. A decisive factor in the ethno-cultural and labor education of modern youth is various forms of their involvement in Ukrainian traditions and folk art, in particular, familiarization with the technologies of making Ukrainian folk toys, which occupy an important place in the upbringing and educational process of student youth. The knotted doll is a unique technology, because this type of folk art is an ethno design project that combines several types of traditional Ukrainian decorative and applied art. In the process of making a knotted doll, such authentic techniques as: ornaments from different ethnographic regions of Ukraine, traditional embroidery techniques, fabric dyeing with biological dyes, weaving, vybiyka (wood printing on fabric), beading, felting from wool, art ceramics, technologies for modeling artificial flowers from paper, fabric, wood shavings, creating wax headband accessories, ancient techniques and methods of tying head scarves and shawls, sewing and decorating head covers – are used. Among the variety of forms, methods and means of ethno design that contribute to the involvement of student youth in Ukrainian traditions, a number of simple and effective educational technologies have been identified and presented in our research, such as: museum-pedagogical activities, visits to cultural and artistic events, exhibitions of works of folk art, thematic exhibitions-presentations use of audio and video recordings from ethnographic expeditions, etc. Of particular importance in the popularization of folk art among young people is personal communication with the bearers of traditions in the format of creative meetings with masters of folk art, visits to master classes, personal exhibitions and workshops of folk masters. The described technologies of youth involvement in folk art affect the development of the cognitive and emotional sphere of the individual, his creative abilities, contribute to the creative and productive educational activities of students. Key words: ethno design; folk art; Ukrainian knotted doll; traditional technologies of making and decorating a folk doll; aesthetic, humanistic, national education of students; technologies for familiarizing young people with folk traditions.

Developing and Evaluating a New Method and Apparatus for Examining Bumble Bee Foraging Behavior

A key question in pollination biology is that of how pollinators identify and choose foraging patches. Several approaches have been employed for this, including field studies and large greenhouse flight chambers. Most methods used to date are limited, though, by reliance on a combination of artificial flowers, large spatial scales, or lack of spatially distinct floral patches. To address this issue, we designed and tested a y-maze flight arena and tested it using the bumblebee Bombus impatiens and canola plants. Our results indicate that the system is not biased by environmental conditions, or by an innate “handedness” of Bombus impatiens. We found that bees made all the expected patch choices when presented with soil, plants without flowers, or plants with flowers. This new method is important and useful as it allows researchers to ask questions of both plant health and insect behavior and the chamber system is modular allowing for simple changes to the setup to focus on different questions. • Y-maze flight arena was designed to evaluate foraging behavior on intact plants. • No evidence of side preference in individual bees. • Behaviors observed in the y-maze appear to correspond to behaviors observed in other settings.