Magnetic Resonance Imaging Artifacts Research Articles

Brief mock-scan training reduces head motion during real scanning for children: A growth curve study

Pediatric neuroimaging datasets are rapidly increasing in scales. Despite strict protocols in data collection and preprocessing focused on improving data quality, the presence of head motion still impedes our understanding of neurodevelopmental mechanisms. Large head motion can lead to severe noise and artifacts in magnetic resonance imaging (MRI) studies, inflating correlations between adjacent brain areas and decreasing correlations between spatial distant territories, especially in children and adolescents. Here, by leveraging mock-scans of 123 Chinese children and adolescents, we demonstrated the presence of increased head motion in younger participants. Critically, a 5.5-minute training session in an MRI mock scanner was found to effectively suppress the head motion in the children and adolescents. Therefore, we suggest that mock scanner training should be part of the quality assurance routine prior to formal MRI data collection, particularly in large-scale population-level neuroimaging initiatives for pediatrics.

Study of compatibility between a 3T MR system and detector modules for a second-generation RF-penetrable TOF-PET insert for simultaneous PET/MRI.

Simultaneous positron emission tomography/magnetic resonance imaging (PET/MRI) has shown promise in acquiring complementary multiparametric information of disease. However, designing these hybrid imaging systems is challenging due to the propensity for mutual interference between the PET and MRI subsystems. Currently, there are integrated PET/MRI systems for clinical applications. For neurologic imaging, a brain-dedicated PET insert provides superior spatial resolution and sensitivity compared to body PETscanners. Our first-generation prototype brain PET insert ("PETcoil") demonstrated RF-penetrability and MR-compatibility. In the second-generation PETcoil system, all analog silicon photomultiplier (SiPM) signal digitization is moved inside the detectors, which results in substantially better PET detector performance, but presents a greater technical challenge for achieving MR-compatibility. In this paper, we report results from MR-compatibility studies of two fully assembled second-generation PET insert detectormodules. We studied the effect of the presence of the two second-generation TOF-PET insert detectors on parameters that affect MR image quality and evaluated TOF-PET detector performance under different MRI pulse sequenceconditions. With the presence of operating PET detectors, no RF noise peaks were induced in the MR images, but the relative average noise level was increased by 15%, which led to a 3.1 to 4.2-dB degradation in MR image signal-to-noise ratio (SNR). The relative homogeneity of MR images degraded by less than 1.5% with the two operating TOF-PET detectors present. The reported results also indicated that ghosting artifacts (percent signal ghosting (PSG) ⩽ 1%) and MR susceptibility artifacts (0.044 ppm) were insignificant. The PET detector data showed a relative change of less than 5% in detector module performance between running outside and within the MR bore under different MRI pulse sequences except for energy resolution in EPI sequence (13% relative difference). The PET detector operation did not cause any significant artifacts in MR images and the performance and time-of-flight (TOF) capability of the former were preserved under different tested MRconditions.

Aluminum Thin Film Nanostructure Traces in Pediatric EEG Net for MRI and CT Artifact Reduction.

Magnetic resonance imaging (MRI) and continuous electroencephalogram (EEG) monitoring are essential in the clinical management of neonatal seizures. EEG electrodes, however, can significantly degrade the image quality of both MRI and CT due to substantial metallic artifacts and distortions. Thus, we developed a novel thin film trace EEG net ("NeoNet") for improved MRI and CT image quality without compromising the EEG signal quality. The aluminum thin film traces were fabricated with an ultra-high-aspect ratio (up to 17,000:1, with dimensions 30 nm × 50.8 cm × 100 µm), resulting in a low density for reducing CT artifacts and a low conductivity for reducing MRI artifacts. We also used numerical simulation to investigate the effects of EEG nets on the B1 transmit field distortion in 3 T MRI. Specifically, the simulations predicted a 65% and 138% B1 transmit field distortion higher for the commercially available copper-based EEG net ("CuNet", with and without current limiting resistors, respectively) than with NeoNet. Additionally, two board-certified neuroradiologists, blinded to the presence or absence of NeoNet, compared the image quality of MRI images obtained in an adult and two children with and without the NeoNet device and found no significant difference in the degree of artifact or image distortion. Additionally, the use of NeoNet did not cause either: (i) CT scan artifacts or (ii) impact the quality of EEG recording. Finally, MRI safety testing confirmed a maximum temperature rise associated with the NeoNet device in a child head-phantom to be 0.84 °C after 30 min of high-power scanning, which is within the acceptance criteria for the temperature for 1 h of normal operating mode scanning as per the FDA guidelines. Therefore, the proposed NeoNet device has the potential to allow for concurrent EEG acquisition and MRI or CT scanning without significant image artifacts, facilitating clinical care and EEG/fMRI pediatric research.

Common Artifacts in Magnetic Resonance Imaging: A Pictorial Essay

Common Artifacts in Magnetic Resonance Imaging: A Pictorial Essay

Numerical approach to investigate MR imaging artifacts from orthopedic implants at different field strengths according to ASTM F2119

ObjectiveThis study presents an extended evaluation of a numerical approach to simulate artifacts of metallic implants in an MR environment.MethodsThe numerical approach is validated by comparing the artifact shape of the simulations and measurements of two metallic orthopedic implants at three different field strengths (1.5 T, 3 T, and 7 T). Furthermore, this study presents three additional use cases of the numerical simulation. The first one shows how numerical simulations can improve the artifact size evaluation according to ASTM F2119. The second use case quantifies the influence of different imaging parameters (TE and bandwidth) on the artifact size. Finally, the third use case shows the potential of performing human model artifact simulations.ResultsThe numerical simulation approach shows a dice similarity coefficient of 0.74 between simulated and measured artifact sizes of metallic implants. The alternative artifact size calculation method presented in this study shows that the artifact size of the ASTM-based method is up to 50% smaller for complex shaped implants compared to the numerical-based approach.ConclusionIn conclusion, the numerical approach could be used in the future to extend MR safety testing according to a revision of the ASTM F2119 standard and for design optimization during the development process of implants.

Artifacts’ Detection for MRI Non-Metallic Needles: Comparative Analysis for Artifact Evaluation Using K-Means and Manual Quantification

Interventional biopsy needles need to be accurately localized to the target tissue during magnetic resonance imaging (MRI) interventions. In this context, severe susceptibility artifacts affect the visibility of structures in the MR images depending on the needle’s material composition. In particular, standard needles for the spinal cord made of nickel-titanium alloys (NiTi) generate massive susceptibility artifacts during MRI. Consequently, this does not allow the precise placement of the needle to the target. The aim was to prove that using a non-metallic material for the needle can significantly reduce the appearance of artifacts. Hence, this work used a new combination of non-metallic materials based on an enforced fiber bundle as an inner core with different outer hollow sheets to fabricate seven prototypes of interventional spinal needles to optimize their visualization in MRI scans. Susceptibility artifacts for the non-metallic needles were evaluated in MRI images by an automatic quantification based on a K-means algorithm and compared with manual quantification. The width and length of the artifacts were measured for each needle. The non-metallic needles showed significantly lower artifacts in comparison to the standard needle. K-means provided the capability for detecting needle artifacts in MRI images, facilitating qualitative and quantitative assessment of MRI artifacts.

Intracerebral Electrophysiological Recordings to Understand the Neural Basis of Human Face Recognition.

Understanding how the human brain recognizes faces is a primary scientific goal in cognitive neuroscience. Given the limitations of the monkey model of human face recognition, a key approach in this endeavor is the recording of electrophysiological activity with electrodes implanted inside the brain of human epileptic patients. However, this approach faces a number of challenges that must be overcome for meaningful scientific knowledge to emerge. Here we synthesize a 10 year research program combining the recording of intracerebral activity (StereoElectroEncephaloGraphy, SEEG) in the ventral occipito-temporal cortex (VOTC) of large samples of participants and fast periodic visual stimulation (FPVS), to objectively define, quantify, and characterize the neural basis of human face recognition. These large-scale studies reconcile the wide distribution of neural face recognition activity with its (right) hemispheric and regional specialization and extend face-selectivity to anterior regions of the VOTC, including the ventral anterior temporal lobe (VATL) typically affected by magnetic susceptibility artifacts in functional magnetic resonance imaging (fMRI). Clear spatial dissociations in category-selectivity between faces and other meaningful stimuli such as landmarks (houses, medial VOTC regions) or written words (left lateralized VOTC) are found, confirming and extending neuroimaging observations while supporting the validity of the clinical population tested to inform about normal brain function. The recognition of face identity - arguably the ultimate form of recognition for the human brain - beyond mere differences in physical features is essentially supported by selective populations of neurons in the right inferior occipital gyrus and the lateral portion of the middle and anterior fusiform gyrus. In addition, low-frequency and high-frequency broadband iEEG signals of face recognition appear to be largely concordant in the human association cortex. We conclude by outlining the challenges of this research program to understand the neural basis of human face recognition in the next 10 years.

Effect of Head Position and Magnetic Resonance Sequence on Cochlear Implant-Related Artifact Size and Internal Auditory Canal Visibility.

To assess whether cochlear implant (CI)-related magnetic resonance imaging (MRI) artifact and visibility of the internal auditory canal (IAC) can be improved with head positioning and select MRI sequences. CI-related MRI artifact limits the use of CIs in otherwise good candidates because of the need for serial MRIs for monitoring of pathology. This most notably impacts patients with tumors of the cerebellopontine angle and IAC. Two cadaver heads were implanted with either a Med-El CONCERT (fixed magnet) or SYNCHRONY (rotating magnet) device. Each head was imaged in a 1.5T scanner in 11 different positions. The SYNCHRONY-implanted head was also imaged in a 3.0T scanner in seven positions. Artifact size and IAC visibility (graded on a Likert scale) were measured for each head position by a neuroradiologist. The CONCERT CI produced significantly smaller artifact than the SYNCHRONY CI (effect size, 14.65 mm; p < 0.001). There was no significant difference between CI models in regard to IAC visibility. No head positions were statistically significantly better than neutral position for minimizing artifact size or IAC visibility, although some positions resulted in significantly larger artifact (effect sizes, 2.1-14.3 mm; p < 0.05) or significantly poorer IAC visibility (effect size, 1.4; p < 0.01). The T2 three-dimensional (CISS/FIESTA) sequence demonstrated significantly smaller artifact than T1 sequences, whereas T1 sequences demonstrated significantly better IAC visibility than T2 sequences. Head positioning and magnetic resonance sequence selection impact CI-related artifact size and IAC visibility.

In vivo assessment of artefacts in MRI images caused by conventional twistflex and various fixed orthodontic CAD/CAM retainers.

To assess magnetic resonance imaging (MRI) artefacts caused by different computer-aided design/computer-aided manufacturing (CAD/CAM) retainers in comparison with conventional hand bent stainless steel twistflex retainers in vivo. MRI scans (3 Tesla) were performed on amale volunteer with different CAD/CAM retainers (cobalt-chromium, CoCr; nickel-titanium, NiTi; grade5 titanium, Ti5) and twistflex retainers inserted. Atotal of 126 landmarks inside and outside the retainer area (RA; from canine to canine) were evaluated by two blinded radiologists using an established five-point visibility scoring (1: excellent, 2: good, 3: moderate, 4: poor, 5: not visible). Friedman and two-tailed Wilcoxon tests were used for statistical analysis (significance level: p < 0.05). Twistflex retainers had the strongest impact on the visibility of all landmarks inside (4.0 ± 1.5) and outside the RA (1.7 ± 1.2). In contrast, artefacts caused by CAD/CAM retainers were limited to the dental area inside the RA (CoCr: 2.2 ± 1.2) or did not impair MRI-based diagnostics in aclinically relevant way (NiTi: 1.0 ± 0.1; Ti5: 1.4 ± 0.6). The present study on asingle test person demonstrates that conventional stainless steel twistflex retainers can severely impair the diagnostic value in head/neck and dental MRI. By contrast, CoCr CAD/CAM retainers can cause artefacts which only slightly impair dental MRI but not head/neck MRI, whereas NiTi and Ti5 CAD/CAM might be fully compatible with both head/neck and dental MRI.

Quantitative evaluation of the reduction of distortion and metallic artifacts in magnetic resonance images using the multiacquisition variable‑resonance image combination selective sequence.

Magnetic resonance imaging (MRI) is superior to computed tomography (CT) in determining changes in tissue structure, such as those observed following inflammation and infection. However, when metal implants or other metal objects are present, MRI exhibits more distortion and artifacts compared with CT, which hinders the accurate measurement of the implants. A limited number of reports have examined whether the novel MRI sequence, multiacquisition variable-resonance image combination selective (MAVRIC SL), can accurately measure metal implants without distortion. Therefore, the present study aimed to demonstrate whether MAVRIC SL could accurately measure metal implants without distortion and whether the area around the metal implants could be well delineated without artifacts. An agar phantom containing a titanium alloy lumbar implant was used for the present study and was imaged using a 3.0 T MRI machine. A total of three imaging sequences, namely MAVRIC SL, CUBE and magnetic image compilation (MAGiC), were applied and the results were compared. Distortion was evaluated by measuring the screw diameter and distance between the screws multiple times in the phase and frequency directions by two different investigators. The artifact region around the implant was examined using a quantitative method following standardization of the phantom signal values. It was revealed that MAVRIC SL was a superior sequence compared with CUBE and MAGiC, as there was significantly less distortion, a lack of bias between the two different investigators and significantly reduced artifact regions. These results suggested the possibility of utilizing MAVRIC SL for follow-up to observe metal implant insertions.

Automatic detection of Gibbs artefact in MR images with transfer learning approach.

Quality control of magnetic resonance imaging includes image validation, which covers also artefact detection. The daily manual review of magnetic resonance images for possible artefacts can be time-consuming, so automated methods for computer-assisted quality assessment of magnetic resonance imaging need to be developed. The aim of this study was to develop automatic detection of Gibbs artefacts in magnetic resonance imaging using a deep learning method called transfer learning, and to demonstrate the potential of this approach for the development of an automatic quality control tool for the detection of such artefacts in magnetic resonance imaging. The magnetic resonance image dataset of the scanned phantom for quality assurance was created using a turbo spin-echo pulse sequence in the transverse plane. Images were created to include Gibbs artefacts of varying intensities. The images were annotated by two independent reviewers. The annotated dataset was used to develop a method for Gibbs artefact detection using the transfer learning approach. The VGG-16, VGG-19, and ResNet-152 convolutional neural networks were used as pre-trained networks for transfer learning and compared using 5-fold cross-validation. All accuracies of the classification models were above 97%, while the AUC values were all above 0.99, confirming the high quality of the constructed models. We show that transfer learning can be successfully used to detect Gibbs artefacts on magnetic resonance images. The main advantages of transfer learning are that it can be applied on small training datasets, the procedures to build the models are not so complicated, and they do not require much computational power. This shows the potential of transfer learning for the more general task of detecting artefacts in magnetic resonance images of patients, which consequently can improve and speed up the process of quality assessment in medical imaging practice.

Motion artifact reduction for magnetic resonance imaging with deep learning and k-space analysis.

Motion artifacts deteriorate the quality of magnetic resonance (MR) images. This study proposes a new method to detect phase-encoding (PE) lines corrupted by motion and remove motion artifacts in MR images. 67 cases containing 8710 slices of axial T2-weighted images from the IXI public dataset were split into three datasets, i.e., training (50 cases/6500 slices), validation (5/650), and test (12/1560) sets. First, motion-corrupted k-spaces and images were simulated using a pseudo-random sampling order and random motion tracks. A convolutional neural network (CNN) model was trained to filter the motion-corrupted images. Then, the k-space of the filtered image was compared with the motion-corrupted k-space line-by-line, to detect the PE lines affected by motion. Finally, the unaffected PE lines were used to reconstruct the final image using compressed sensing (CS). For the simulated images with 35%, 40%, 45%, and 50% unaffected PE lines, the mean peak signal-to-noise ratio (PSNRs) of resulting images (mean±standard deviation) were 36.129±3.678, 38.646±3.526, 40.426±3.223, and 41.510±3.167, respectively, and the mean structural similarity (SSIMs) were 0.950±0.046, 0.964±0.035, 0.975±0.025, and 0.979±0.023, respectively. For images with more than 35% PE lines unaffected by motion, images reconstructed with proposed algorithm exhibited better quality than those images reconstructed with CS using 35% under-sampled data (PSNR 37.678±3.261, SSIM 0.964±0.028). It was proved that deep learning and k-space analysis can detect the k-space PE lines affected by motion and CS can be used to reconstruct images from unaffected data, effectively alleviating the motion artifacts.

Artifacts Can Be Deceiving: The Actual Location of Deep Brain Stimulation Electrodes Differs from the Artifact Seen on Magnetic Resonance Images

Introduction: Deep brain stimulation (DBS) is a common treatment for a variety of neurological and psychiatric disorders. Recent studies have highlighted the role of neuroimaging in localizing the position of electrode contacts relative to target brain areas in order to optimize DBS programming. Among different imaging methods, postoperative magnetic resonance imaging (MRI) has been widely used for DBS electrode localization; however, the geometrical distortion induced by the lead limits its accuracy. In this work, we investigated to what degree the difference between the actual location of the lead’s tip and the location of the tip estimated from the MRI artifact varies depending on the MRI sequence parameters such as acquisition plane and phase encoding direction, as well as the lead’s extracranial configuration. Accordingly, an imaging technique to increase the accuracy of lead localization was devised and discussed. Methods: We designed and constructed an anthropomorphic phantom with an implanted DBS system following 18 clinically relevant configurations. The phantom was scanned at a Siemens 1.5 Tesla Aera scanner using a T₁MPRAGE sequence optimized for clinical use and a T₁TSE sequence optimized for research purposes. We varied slice acquisition plane and phase encoding direction and calculated the distance between the caudal tip of the DBS lead MRI artifact and the actual tip of the lead, as estimated from MRI reference markers. Results: Imaging parameters and lead configuration substantially altered the difference in the depth of the lead within its MRI artifact on the scale of several millimeters − with a difference as large as 4.99 mm. The actual tip of the DBS lead was found to be consistently more rostral than the tip estimated from the MR image artifact. The smallest difference between the tip of the DBS lead and the tip of the MRI artifact using the clinically relevant sequence (i.e., T₁MPRAGE) was found with the sagittal acquisition plane and anterior-posterior phase encoding direction. Discussion/Conclusion: The actual tip of an implanted DBS lead is located up to several millimeters rostral to the tip of the lead’s artifact on postoperative MR images. This distance depends on the MRI sequence parameters and the DBS system’s extracranial trajectory. MRI parameters may be altered to improve this localization.

Role of radial k –space sampling technique in non-cooperative patients for the compensation of motion artifact in magnetic resonance imaging (MRI).

Objective: To access the role of radial K-space sampling technique for the compensation of motion artifact in magnetic resonance imaging (MRI). Study Design: Systematic Literature Search. Setting: Department of Radiology, Shalimar Hospital, Lahore. Period: March 2019 to Oct 2019. Material &amp; Methods: Was conducted with the help the of following search engines: Google scholar, PubMed, NCBI, Medline and Medscape databases from 1999 up to 2019 for names or acronyms of Radial K-space sampling, propeller sequence, management of motion artifact in MRI, RADAR sequence for motion compensation in MRI, k-space in clinic and multivane. Only those studies were included in this review study which shows the role of radial K-space sampling Technique for compensation of motion artifact. Total 104 studies were selected and after evaluation only 42 studies were included. Results: According to literature radial k-space sampling improved the quality of image and provided the scans with reduced motion artifact. Whereas in case of specificity (N= 16) the mean calculated value was 80.87 and Std. Deviation was 7.022. In case of radial k-space sampling technique (N=42) calculated mean was .26 and std. deviation was .701. The main disadvantage of radial k-space sampling is increased scan time. Conclusion: After reviewing literature of 42 studies, it was assessed that the use of radial K-space sampling technique or propeller sequence adjacent to the standard MRI sequences can reduce the motion artifact and will increase the image quality.

System-dependent image distortion related to gantry positions of a 0.35 T MRgRT: Characterization and the corresponding correction.

MR-guided radiotherapy with high accuracy treatment planning requires addressing MR imaging artifacts that originate from system imperfections. This work presents the characterization and corresponding correction of gantry-related imaging distortions including geometric distortion and isocenter shift in a 0.35 T magnetic resonance imaging (MRI)-guided radiotherapy (MRgRT) system using distortion vector fields (DVFs). Two phantoms, the magnetic resonance imaging distortion in 3D (MRID3D ) phantom and the Fluke phantom, along with a human volunteer were imaged at different gantry angles on a 0.35 T MR-Linac. The geometric distortion and isocenter shift were characterized for both phantom images. DVFs with a field of view extended beyond the physical boundary of the MRID3D phantom were extracted from images taken at 30° gantry angle increments, with vendor-provided distortion correction turned on and off (DstOff). These extended DVFs were then applied to the relevant phantom images to correct their geometric distortions and isocenter shift at the respective gantry angles. The extended DVFs produced from the MRID3D phantom were also applied to Fluke phantom and human MR images at their respective gantry angles. The resampled images were evaluated using structural similarity index measure (SSIM) comparison with the vendor corrected images from the MRgRT system. Geometric distortion with "mean (±SD) distortion" of 3.2±0.02, 2.9±0.02, and 1.8±0.01mm and isocenter shift (±SD) of 0.49±0.3, 0.05±0.2, and 0.01±0.03mm were present in the DstOff MRID3D phantom images in right-left (RL), anterior-posterior (AP), and superior-inferior (SI) directions, respectively. After resampling the originally acquired images by applying extended DVFs, the distortion was corrected to 0.18±0.02, 0.09±0.01, 0.15±0.01mm, and isocenter shift was corrected to 0.14±0.05, -0.02±0.04, and -0.07±0.05mm in RL, AP, and SI directions, respectively. The Fluke phantom average geometric distortion with "mean (±SD) distortion" of 2.7±0.1mm was corrected to 0.2±0. 1mm and the average isocenter shift (±SD) of 0.51±0.2mm, and 0.05±0.03 was corrected to -0.08±0.03mm, and -0.05±0.01 in RL and AP directions, respectively. SSIM (mean±SD) of the original images to resampled images was increased from 0.49±0.02 to 0.78±0.01, 0.45±0.02 to 0.75±0.01, and 0.86±0.25 to 0.98±0.08 for MRID3D phantom, Fluke phantom, and human MR images, respectively, for all the gantry angles compared to the vendor corrected images. The gantry-related MR imaging distortion including geometric distortion and isocenter shift was characterized and a corresponding correction was demonstrated using extended DVFs on 0.35 T MRgRT system. The characterized gantry-related isocenter shift can be combined with geometric distortion correction to provide a technique for the correction of the full system-dependent distortion in an MRgRT system.

Analysis of whole-body MRI artifacts in a pediatric population with a special emphasis on the effect of hands position

PurposeThe purpose of this retrospective study was to determine the prevalence of artifacts on whole-body (WB) magnetic resonance imaging (MRI) examination in pediatric patients and identify their causes. Materials and methodsA total of 107 pediatric patients who underwent a total of 107 WB-MRI examinations, including short-tau inversion recovery (STIR) and T1-weighted sequences, were included. There were 62 girls and 45 boys with a mean age of 11 ± 3 (SD) years (age range: 2–16 years). WB-MRI examinations were analyzed for the presence of artifacts on STIR and T1-weighted sequences. Artifacts were further assigned to one of eight categories (motion, partial volume, cross-talk, phase sampling, susceptibility, equipment, noise, and “other”) and 19 anatomical sites by a 4-year resident. Prevalence of artifacts were analyzed especially according to hands position during the examination for the upper limbs and patients’ age. Age was expressed as a binary variable using median age (10 years) as the cut-off value. All qualitative variables were compared using chi-square test. ResultsA total of 3436 artifacts were found. The STIR sequences showed more “noise” artifacts (93/1038; 8.96%) and more “cross-talk” (102/1038; 9.83%) artifacts than T1-weighted sequences (12/1038 [1.16%] and 7/1038 [0.67%], respectively) (P < 0.001 for both). T1-weighted sequences showed more “equipment” (84/1038; 8.09%) and “stair-step” (a subset of “other”) (41/1038; 3.95%) artifacts than the STIR sequences (39/1038 [3.76%] and 21/1038 [2.02%], respectively) (P < 0.001 and P = 0.01, respectively). T1-weighted sequences showed fewer artifacts on the wrists when the hands were under the bottom (P = 0.001). T1-weighted sequences showed less “equipment” artifacts when the hands were alongside the body (22/296; 7%) than on the abdomen (48/432; 11%) or under the bottom (14/128; 11%) (P < 0.001). STIR sequences showed more “motion” artifacts when the hands were on the abdomen (54/432; 13%) than alongside the body (30/296; 10%) or under the bottom (15/128; 12%) (P < 0.001). WB-MRI examinations had more “susceptibility” artifacts (38/960; 4%) and more “equipment” artifacts (81/960; 8.4%) in patients older than 10 years than in those under 10 years (23/752 [3.1%] and 42/752 [5.6%]) (P = 0.01 and P < 0.001, respectively). ConclusionArtifacts on WB-MRI do not affect coronal STIR and T1-weighted sequences equally, so the use of both sequence types appears useful. Hands position should be considered with respect to both diagnostic benefit and safety.

A comprehensive look at magnetic resonance imaging

Introduction: High-resolution pictures of soft tissue may be obtained using magnetic resonance imaging (MRI). Sophisticated chemical and physical data may be gathered using this spectroscopic approach, which depends on the magnetic resonance principle as its base. Aim: The purpose of this article was to provide a short overview of MRI, different contrast agents in MRI, its use in oral medicine, its contraindications, and the most recent MRI discoveries and artifacts related to MRI. Methods: An online search was conducted using databases such as PubMed, Embase, Web of Science, Scopus, and Google Scholar to locate articles that dealt with MRI, oral medicine, recent advancements, dental applications, and contrast agents. The search was limited to studies that were published before March 2022. Results: A total of 31 articles were included and analyzed for this review. Conclusion: MRI is more sensitive than other imaging modalities in the diagnosis of soft tissue in the head-and-neck area; the use of three-dimensional imaging will expand further advancements in this imaging modality.

Focal electrical stimulation on an alcohol disorder model using magnetic resonance imaging-compatible chronic neural monopolar carbon fiber electrodes.

Neuromodulation interventions, such as Deep Brain Stimulation (DBS) and repeated transcranial magnetic stimulation (rTMS), are proposed as possible new complementary therapies to treat substance use disorders (SUD) such as alcohol use disorder (AUD). It is hypothesized that neuromodulation may induce neural plasticity in the reward and frontostriatal systems via electrical field induction, possibly reducing symptoms. Preclinical self-administration rodent models of AUD may help us gain insight into the effects of neuromodulation therapies on different pathology, as well as the neural mechanisms behind the positive effects. DBS, or any type of brain stimulation using intracranial electrodes in rodents, would benefit from the use of magnetic resonance imaging (MRI) to study the longitudinal effects and mechanisms of stimulation as well as novel targets, as it is a non-invasive technique that allows the analysis of structural and functional changes in the brain. To do this, there is a need for MRI-compatible electrodes that allow for MRI acquisition with minimal distortion of the magnetic field. In this protocol, we present a method for the construction and surgery of chronically implantable monopolar carbon electrodes for use in rats. Unlike conventional electrodes, carbon electrodes are resistant to high temperatures, flexible, and generate fewer artifacts in MRI compared to conventional ones. We validated its use by using a focal electrical stimulation high-frequency (20 Hz) protocol that lasted ∼10 sessions. We propose that this technique can also be used for the research of the neurophysiological bases of the neuromodulatory treatment in other preclinical substance use disorders (SUD) models.

Cranial window for longitudinal and multimodal imaging of the whole mouse cortex.

.SignificanceAll functional brain imaging methods have technical drawbacks and specific spatial and temporal resolution limitations. Unraveling brain function requires bridging the data acquired with cellular and mesoscopic functional imaging. This imposes the access to animal preparations, allowing longitudinal and multiscale investigations of brain function in anesthetized and awake animals. Such preparations are optimal to study normal and pathological brain functions while reducing the number of animals used.AimTo fulfill these needs, we developed a chronic and stable preparation for a broad set of imaging modalities and experimental design.ApproachWe describe the detailed protocol for a chronic cranial window, transparent to light and ultrasound, devoid of BOLD functional magnetic resonance imaging (fMRI) artifact and allowing stable and longitudinal multimodal imaging of the entire mouse cortex.ResultsThe inexpensive, transparent, and curved polymethylpentene cranial window preparation gives access to the entire mouse cortex. It is compatible with standard microscopic and mesoscopic neuroimaging methods. We present examples of data on the neurovascular unit and its activation using two-photon, functional ultrasound imaging, and BOLD fMRI.ConclusionThis preparation is ideal for multimodal imaging in the same animal.

Brain activity studied with magnetic resonance imaging in awake rabbits.

We reviewed fMRI experiments from our previous work in conscious rabbits, an experimental preparation that is advantageous for measuring brain activation that is free of anesthetic modulation and which can address questions in a variety of areas in sensory, cognitive, and pharmacological neuroscience research. Rabbits do not struggle or move for several hours while sitting with their heads restrained inside the horizontal bore of a magnet. This greatly reduces movement artifacts in magnetic resonance (MR) images in comparison to other experimental animals such as rodents, cats, and monkeys. We have been able to acquire high-resolution anatomic as well as functional images that are free of movement artifacts during several hours of restraint. Results from conscious rabbit fMRI studies with whisker stimulation are provided to illustrate the feasibility of this conscious animal model for functional MRI and the reproducibility of data gained with it.