Herein, we present a systematical investigation with regard to the Ar/N2/O2 plasma surface treatments on the ZnO thin films prepared by a radio frequency plasma-assisted molecular beam epitaxy (RF MBE) technique. The as-deposited ZnO thin films are exposed to the Ar, N2 and O2 plasma atmospheres under different RF powers. The conductivity and the surface morphology of the post-treated ZnO thin films are strongly depending on the treatment species and the RF powers. Higher RF power results in lower resistance and reduces the grain boundaries of the surface. Indium and gold metals are designed as the Ohmic and Schottky contact electrodes, respectively. The ZnO/Au contacts based on both pre-treated films and Ar/N2 plasma-treated films show obvious Ohmic contact behaviors. However, In/ZnO/Au the devices fabricated on the ZnO thin film which exposes to the O2 plasma show distinct rectified behavior, indicating the conversion of ZnO/Au contact from Ohmic type to Schottky type. The O2 plasma treatment may play two key roles within the contact conversion: 1, removing the surface contaminants such as carbon, absorbed oxygen and hydroxide; 2, repairing the defects (Vo), thus reducing the near surface donor density and defect assisted hopping transportation.