Regenerative Medicine Applications Research Articles

Three-Dimensional Bioprinting: A Comprehensive Review for Applications in Tissue Engineering and Regenerative Medicine.

Since three-dimensional (3D) bioprinting has emerged, it has continuously to evolved as a revolutionary technology in surgery, offering new paradigms for reconstructive and regenerative medical applications. This review highlights the integration of 3D printing, specifically bioprinting, across several surgical disciplines over the last five years. The methods employed encompass a review of recent literature focusing on innovations and applications of 3D-bioprinted tissues and/or organs. The findings reveal significant advances in the creation of complex, customized, multi-tissue constructs that mimic natural tissue characteristics, which are crucial for surgical interventions and patient-specific treatments. Despite the technological advances, the paper introduces and discusses several challenges that remain, such as the vascularization of bioprinted tissues, integration with the host tissue, and the long-term viability of bioprinted organs. The review concludes that while 3D bioprinting holds substantial promise for transforming surgical practices and enhancing patient outcomes, ongoing research, development, and a clear regulatory framework are essential to fully realize potential future clinical applications.

Mechanobiological Strategies to Enhance Ovine (Ovis aries) Adipose-Derived Stem Cells Tendon Plasticity for Regenerative Medicine and Tissue Engineering Applications.

Adipose-derived stem cells (ADSCs) hold promise for tendon repair, even if their tenogenic plasticity and underlying mechanisms remain only partially understood, particularly in cells derived from the ovine animal model. This study aimed to characterize oADSCs during in vitro expansion to validate their phenotypic properties pre-transplantation. Moreover, their tenogenic potential was assessed using two in vitro-validated approaches: (1) teno-inductive conditioned media (CM) derived from a co-culture between ovine amniotic stem cells and fetal tendon explants, and (2) short- (48 h) and long-term (14 days) seeding on highly aligned PLGA (ha-PLGA) electrospun scaffold. Our findings indicate that oADSCs can be expanded without senescence and can maintain the expression of stemness (Sox2, Oct4, Nanog) and mesenchymal (CD29, CD166, CD44, CD90) markers while remaining negative for hematopoietic (CD31, CD45) and MHC-II antigens. Of note, oADSCs' tendon differentiation potential greatly depended on the in vitro strategy. oADSCs exposed to CM significantly upregulated tendon-related genes (COL1, TNMD, THBS4) but failed to accumulate TNMD protein at 14 days of culture. Conversely, oADSCs seeded on ha-PLGA fleeces quickly upregulated the tendon-related genes (48 h) and in 14 days accumulated high levels of the TNMD protein into the cytoplasm of ADSCs, displaying a tenocyte-like morphology. This mechano-sensing cellular response involved a complete SOX9 downregulation accompanied by YAP activation, highlighting the efficacy of biophysical stimuli in promoting tenogenic differentiation. These findings underscore oADSCs' long-term self-renewal and tendon differentiative potential, thus opening their use in a preclinical setting to develop innovative stem cell-based and tissue engineering protocols for tendon regeneration, applied to the veterinary field.

Extrusion-Based Bioprinting in a Cost-Effective Bioprinter

Three-dimensional (3D) bioprinting has emerged as a revolutionary approach in the life sciences, combining multiple disciplines such as computer engineering, materials science, robotics, and biomedical engineering. This innovative technology enables the production of cellular constructs using bio-inks, and differs from conventional 3D printing by incorporating living cells. The present work addresses the conversion of a commercial thermoplastic 3D printer into a low-cost bioprinter. The modification addresses the challenges of the high cost of commercial bioprinters, limited adaptability, and specialized personnel requirements. This modification uses an extrusion-based bioprinting method that is particularly popular in research due to its viscosity tolerance and versatility. The individual steps, including replacing the extruder with a syringe pump, rebuilding the electronic motherboard, and configuring the firmware, are explained in detail. The work aims at providing access to bioprinting technology so that laboratories with modest resources can take advantage of the immense potential of this technology. This modification resulted in improved resolution, allowing submicron movements, which is comparable to some of the commercially available bioprinters. The accuracy of the modified printer was validated using hydrogel bioprinting tests, suggesting that it is suitable for broader applications in regenerative medicine.

Strategies To Enhance Biocompatibility of Bone Scaffold for Tissue Engineering Applications

Tissue engineering (TE) is a modern approach to improve or restore tissues that has been diseased or damaged by combining the factors in growth signaling and appropriate cells to form compatible biomaterial scaffold. Bone repair has been a major global health challenge in recent decades. Bone transplantation is widely used as an effective clinical treatment for this purpose. However, there are several serious issues with transplantation, including a shortage of autologous bone, immune rejection, the risk of virus transmission with allogeneic bone, and postoperative complications. In recent years, scaffolds for bone tissue engineering have emerged as a promising alternative for bone repair. These scaffolds have porous structures that mimic the extracellular matrix, which can enhance the migration, proliferation, and differentiation of osteoblasts. This process accelerates the repair of bone defects.The usage of bioactive materials has become important tool in tissue engineering and regenerative medicine application as they are to mimic tissues mechanically, chemically, and physically. Polymeric scaffold provides numerous advantageous for tissue engineering since the physicochemical properties such as porosity, pore size, solubility and biocompatibility can be controlled. Therefore, research works were carried out to explore the potential of various materials in producing bone scaffolds in tissue engineering technology. As for both newcomers and experts, this review paper will help them to find information on various types of biomaterials in imparting or enhancing their biological properties such as biocompatibility, bacterial inhibition, tissue regeneration and cell growth, bio inertness, bioactive and resorbability for bone scaffold tissue engineering application.

Bioactive polymer composite scaffolds fabricated from 3D printed negative molds enable bone formation and vascularization

Scaffolds for bone defect treatment should ideally support vascularization and promote bone formation, to facilitate the translation into biomedical device applications. This study presents a novel approach utilizing 3D-printed water-dissolvable polyvinyl alcohol (PVA) sacrificial molds to engineer polymerized High Internal Phase Emulsion (polyHIPE) scaffolds with microchannels and distinct multiscale porosity. Two sacrificial mold variants (250 µm and 500 µm) were generated using fused deposition modeling, filled with HIPE, and subsequently dissolved to create polyHIPE scaffolds containing microchannels. In vitro assessments demonstrated significant enhancement in cell infiltration, proliferation, and osteogenic differentiation, underscoring the favorable impact of microchannels on cell behavior. High loading efficiency and controlled release of the osteogenic factor BMP-2 were achieved, with microchannels facilitating release of the growth factor. Evaluation in a mouse critical-size calvarial defect model revealed enhanced vascularization and bone formation in microchanneled scaffolds containing BMP-2. This study not only introduces an accessible method for creating multiscale porosity in polyHIPE scaffolds but also emphasizes its capability to enhance cellular infiltration, controlled growth factor release, and in vivo performance. The findings suggest promising applications in bone tissue engineering and regenerative medicine, and are expected to facilitate the translation of this type of biomaterial scaffold. Statement of significanceThis study holds significance in the realm of biomaterial scaffold design for bone tissue engineering and regeneration. We demonstrate a novel method to introduce controlled multiscale porosity and microchannels into polyHIPE scaffolds, by utilizing 3D-printed water-dissolvable PVA molds. The strategy offers new possibilities for improving cellular infiltration, achieving controlled release of growth factors, and enhancing vascularization and bone formation outcomes. This microchannel approach not only marks a substantial stride in scaffold design but also demonstrates its tangible impact on enhancing osteogenic cell differentiation and fostering robust bone formation in vivo. The findings emphasize the potential of this methodology for bone regeneration applications, showcasing an interesting advancement in the quest for effective and innovative biomaterial scaffolds to regenerate bone defects.

Exosomes Exposed: Overview Systematic Review on Evidence Versus Expectation in Aesthetic and Regenerative Medicine.

Exosomes, diminutive extracellular vesicles, are integral to intercellular communication, harbouring potential for applications in regenerative medicine and aesthetic interventions. The field, however, grapples with the complexities of harmonising exosome characterisation protocols and safeguarding therapeutic integrity. In this scholarly overview, systematic adherence to the Cochrane Collaboration and Preferred Reporting Items for Overviews of Reviews guidelines was observed, scrutinising the congruence of exosome-related therapies with the Minimal Information for Studies of Extracellular Vesicles standards delineated by the International Society for Extracellular Vesicles, alongside criteria set forth by the International Society for Cell Therapy and the International Society for Stem Cell Research. A meticulous search strategy spanning databases such as PubMed, Scopus, Web of Science, EMBASE, and Cochrane database was employed to encapsulate studies pertinent to the isolation, characterisation, and functional assessment of exosomes. The initial search yielded 225 articles, of which 17 systematic reviews were selected based on predefined criteria, encompassing 556 primary studies. Notwithstanding the acknowledged therapeutic promise of exosome modalities, the synthesis illuminated a prevalent deficiency in adherence to established reporting and experimental benchmarks, notably in exosome source characterisation and bioactive constituent delineation. A critical appraisal employing the AMSTAR-2 tool underscored a pervasive shortfall in methodological rigour. This review accentuates the imperative for stringent methodological standardisation within exosome research to fortify the validity and reproducibility of empirical findings. Amidst the burgeoning therapeutic optimism, the discipline must rectify methodological disparities and comply with regulatory mandates, ensuring the ethically sound and scientifically robust advancement of exosome-based therapeutic modalities. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Tunable Viscoelasticity of Alginate Hydrogels via Serial Autoclaving.

Alginate hydrogels are widely used as biomaterials for cell culture and tissue engineering due to their biocompatibility and tunable mechanical properties. Reducing alginate molecular weight is an effective strategy for modulating hydrogel viscoelasticity and stress relaxation behavior, which can significantly impact cell spreading and fate. However, current methods like gamma irradiation to produce low molecular weight alginates suffer from high cost and limited accessibility. Here, a facile and cost-effective approach to reduce alginate molecular weight in a highly controlled manner using serial autoclaving is presented. Increasing the number of autoclave cycles results in proportional reductions in intrinsic viscosity, hydrodynamic radius, and molecular weight of the polymer while maintaining its chemical composition. Hydrogels fabricated from mixtures of the autoclaved alginates exhibit tunable mechanical properties, with inclusion of lower molecular weight alginate leading to softer gels with faster stress relaxation behaviors. The method is demonstrated by establishing how viscoelastic relaxation affects the spreading of encapsulated fibroblasts and glioblastoma cells. Results establish repetitive autoclaving as an easily accessible technique to generate alginates with a range of molecular weights and to control the viscoelastic properties of alginate hydrogels, and demonstrate utility across applications in mechanobiology, tissue engineering, and regenerative medicine.

BMP-Binding Polysulfonate Brushes to Control Growth Factor Presentation and Regulate Matrix Remodelling.

Bone morphogenetic proteins (BMPs) are important targets to incorporate in biomaterial scaffolds to orchestrate tissue repair. Glycosaminoglycans (GAGs) such as heparin allow the capture of BMPs and their retention at the surface of biomaterials at safe concentrations. Although heparin has strong affinities for BMP2 and BMP4, two important types of growth factors regulating bone and tissue repair, it remains difficult to embed stably at the surface of a broad range of biomaterials and degrades rapidly in vitro and in vivo. In this report, biomimetic poly(sulfopropyl methacrylate) (PSPMA) brushes are proposed as sulfated GAG mimetic interfaces for the stable capture of BMPs. The growth of PSPMA brushes via a surface-initiated activator regenerated by electron transfer polymerization is investigated via ellipsometry, prior to characterization of swelling and surface chemistry via X-ray photoelectron spectroscopy and Fourier transform infrared. The capacity of PSPMA brushes to bind BMP2 and BMP4 is then characterized via surface plasmon resonance. BMP2 is found to anchor particularly stably and at high density at the surface of PSPMA brushes, and a strong impact of the brush architecture on binding capacity is observed. These results are further confirmed using a quartz crystal microbalance with dissipation monitoring, providing some insights into the mode of adsorption of BMPs at the surface of PSPMA brushes. Primary adsorption of BMP2, with relatively little infiltration, is observed on thick dense brushes, implying that this growth factor should be accessible for further binding of corresponding cell membrane receptors. Finally, to demonstrate the impact of PSPMA brushes for BMP2 capture, dermal fibroblasts were then cultured at the surface of functionalized PSPMA brushes. The presence of BMP2 and the architecture of the brush are found to have a significant impact on matrix deposition at the corresponding interfaces. Therefore, PSPMA brushes emerge as attractive coatings for scaffold engineering and stable capture of BMP2 for regenerative medicine applications.

Ontogeny of Skin Stem Cells and Molecular Underpinnings.

Skin stem cells (SCs) play a pivotal role in supporting tissue homeostasis. Several types of SCs are responsible for maintaining and regenerating skin tissue. These include bulge SCs and others residing in the interfollicular epidermis, infundibulum, isthmus, sebaceous glands, and sweat glands. The emergence of skin SCs commences during embryogenesis, where multipotent SCs arise from various precursor populations. These early events set the foundation for the diverse pool of SCs that will reside in the adult skin, ready to respond to tissue repair and regeneration demands. A network of molecular cues regulates skin SC behavior, balancing quiescence, self-renewal, and differentiation. The disruption of this delicate equilibrium can lead to SC exhaustion, impaired wound healing, and pathological conditions such as skin cancer. The present review explores the intricate mechanisms governing the development, activation, and differentiation of skin SCs, shedding light on the molecular signaling pathways that drive their fate decisions and skin homeostasis. Unraveling the complexities of these molecular drivers not only enhances our fundamental knowledge of skin biology but also holds promise for developing novel strategies to modulate skin SC fate for regenerative medicine applications, ultimately benefiting patients with skin disorders and injuries.

The Impact of Gelatin and Fish Collagen on Alginate Hydrogel Properties: A Comparative Study.

Hydrogel materials based on sodium alginate find versatile applications in regenerative medicine and tissue engineering due to their unique properties, such as biocompatibility and biodegradability, and the possibility of the customization of their mechanical properties, such as in terms of the individual requirements of separate clinical applications. These materials, however, have numerous limitations in the area of biological activity. In order to eliminate their limitations, sodium alginate is popularly applied in combination with added gelatin, which represents a product of collagen hydrolysis. Despite numerous beneficial biological properties, matrix materials based on gelatin have poor mechanical properties and are characterized by their ability for rapid degradation in an aqueous environment, particularly at the physiological temperature of the body, which significantly limits the independent application opportunities of this type of composition in the range of scaffolding production dedicated for tissue engineering. Collagen hydrogels, unlike gelatin, are characterized by higher bioactivity, dictated by a greater number of ligands that allow for cell adhesion, as well as better stability under physiological conditions. Fish-derived collagen provides a material that may be efficiently extracted without the risk of mammalian prion infection and can be used in all patients without religious restrictions. Considering the numerous advantages of collagen indicating its superiority over gelatin, within the framework of this study, the compositions of hydrogel materials based on sodium alginate and fish collagen in different concentrations were developed. Prepared hydrogel materials were compared with the properties of a typical composition of alginate with the addition of gelatin. The rheological, mechanical, and physicochemical properties of the developed polymer compositions were evaluated. The first trials of 3D printing by extrusion technique using the analyzed polymer solutions were also conducted. The results obtained indicate that replacing gelatin with fish collagen at an analogous concentration leads to obtaining materials with a lower swelling degree, better mechanical properties, higher stability, limited release kinetics of calcium ions cross-linking the alginate matrix, a slowed process of protein release under physiological conditions, and the possibility of extrusion 3D printing. The conducted analysis highlights that the optimization of the applied concentrations of fish collagen additives to composition based on sodium alginate creates the possibility of designing materials with appropriate mechanical and rheological properties and degradation kinetics adjusted to the requirements of specific applications, leading to the prospective opportunity to produce materials capable of mimicking the properties of relevant soft tissues. Thanks to its excellent bioactivity and lower-than-gelatin viscosity of the polymer solution, fish collagen also provides a prospective solution for applications in the field of 3D bioprinting.

Rapid and Controllable Multilayer Cell Sheet Assembly via Biodegradable Nanochannel Membranes

AbstractThe ability to precisely arrange and control the assembly of diverse cell types into intricate 3D structures remains a critical challenge in tissue engineering. Herein, a versatile and programmable 3D cell sheet assembly is described technology by developing a biodegradable nanochannel (BNC) membrane to fulfill this unmet need. This membrane, hierarchically assembled from 2D nanomaterial aggregates, exhibits both exceptional fluid permeability and rapid biodegradation under physiological conditions. The unique properties of the BNC membrane enable precise spatial and temporal control over cell assembly, facilitating the creation of complex 3D cellular architectures. The BNC membrane is integrated with a programmable negative‐pressure‐based cell assembly strategy to form single and multicellular 3D sheets in a highly controllable manner. To demonstrate the feasibility and translatability of this technology in the field of tissue engineering approaches to screen stem cell‐derived therapeutics with “core–shell” macrophage‐fibroblast multicellular patterns and treat murine diabetic skin wounds via scaffold‐free 3D adipose‐derived mesenchymal stem cell (ADMSC) sheets are devised. In summary, the results demonstrate that the BNC membrane‐based 3D cell sheet assembly approach significantly advances current tissue engineering capabilities, offering substantial potential for both regenerative medicine applications and the development of physiologically relevant disease models.

Sphingolipidomic profiling of human Dental Pulp Stem Cells undergoing osteogenic differentiation

It is now recognized that sphingolipids are involved in the regulation and pathophysiology of several cellular processes such as proliferation, migration, and survival. Growing evidence also implicates them in regulating the behaviour of stem cells, the use of which is increasingly finding application in regenerative medicine. A shotgun lipidomic study was undertaken to determine whether sphingolipid biomarkers exist that can regulate the proliferation and osteogenic differentiation of human Dental Pulp Stem Cells (hDPSCs). Sphingolipids were extracted and identified by direct infusion into an electrospray mass spectrometer. By using cells cultured in osteogenic medium and in medium free of osteogenic stimuli, as a control, we analyzed and compared the SPLs profiles. Both cellular systems were treated at different times (72 hours, 7 days, and 14 days) to highlight any changes in the sphingolipidomic profiles in the subsequent phases of the differentiation process. Signals from sphingolipid species demonstrating clear differences were selected, their relative abundance was determined, and statistical differences were analyzed. Thus, our work suggests a connection between sphingolipid metabolism and hDPSC osteogenic differentiation and provides new biomarkers for improving hDPSC-based orthopaedic regenerative medicine.

Thermal, surface, and structure analysis of molybdenum substituted bioactive glass ceramics SiO2-CaO- MoO3-P2O5

This study explores the incorporation of molybdenum oxide (MoO3) as a dopant in SiO2-CaO-P2O5 (BGC) glass-ceramics through a meticulously designed sol-gel synthesis process to optimize properties for regenerative medicine applications. Comprehensive characterization techniques, including thermal analysis (TGA/DSC), Raman spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR), elucidate the morphological and structural modifications induced by MoO3 doping. Results reveal that MoO3 affects the glass transition temperature, crystallization behavior, and surface morphology, leading to enhanced glass stability, crystallinity, and surface properties. The mechanical properties, such as fracture toughness, also significantly improved with MoO3 doping due to the formation of crystalline phases and densification of the material structure. Notably, the doping of MoO3 promotes the formation of CaMoO4 crystalline phases and influences the synthesis of hydroxyapatite—critical for bone tissue regeneration—when immersed in simulated body fluid (SBF). The study highlights the hydrophilic nature of the doped samples, facilitating bone development and cell adhesion, while also showing that increased MoO3 content reduces the rate of hydroxyapatite formation and material degradability. These findings demonstrate that MoO3 doping via the sol-gel method offers a promising approach for tailoring BGC glass-ceramics' properties, making them more suitable for regenerative medicine applications. This research underscores the potential of MoO3 in advancing biomaterial development for tissue engineering and implantology.

Chemically Defined Organoid Culture System for Cholangiocyte Differentiation.

Cholangiocyte organoids provide a powerful platform for applications ranging from in vitro modeling to tissue engineering for regenerative medicine. However, their expansion and differentiation are typically conducted in animal-derived hydrogels, which impede the full maturation of organoids into functional cholangiocytes. In addition, these hydrogels are poorly defined and complex, limiting the clinical applicability of organoids. In this study, a novel medium composition combined with synthetic polyisocyanopeptide (PIC) hydrogels to enhance the maturation of intrahepatic cholangiocyte organoids (ICOs) into functional cholangiocytes is utilized. ICOs cultured in the presence of sodium butyrate and valproic acid, a histone deacetylase inhibitor, and a Notch signaling activator, respectively, in PIC hydrogel exhibit a more mature phenotype, as evidenced by increased expression of key cholangiocyte markers, crucial for biliary function. Notably, mature cholangiocyte organoids in PIC hydrogel display apical-out polarity, in contrast to the traditional basal-out polarization of ICOs cultured in Matrigel. Moreover, these mature cholangiocyte organoids effectively model the biliary pro-fibrotic response induced by transforming growth factor beta. Taken together, an animal-free, chemically defined culture system that promotes the ICOs into mature cholangiocytes with apical-out polarity, facilitating regenerative medicine applications and in vitro studies that require access to the apical membrane, is developed.

Microfluidic system for generating a three-dimensional (3D) vascularized islet-on-a-chip model

Diabetes is a disease associated with the insufficiency of pancreatic endocrine part, consisting mainly of pancreatic islets. Currently, diabetes is considered the fastest growing civilization disease. Globally, over 440 million people suffer from diabetes, and it is estimated that this number will increase to 700 million by 2045. Pancreatic islets are complex, highly vascularized mini-organs, and only the development of a fully functional vascularized pancreatic islet model could lead to the progress of knowledge about diabetes evolution, new therapeutic strategies, and the islet generation for applications in regenerative medicine. Therefore, the main goal of our study was to develop a microfluidic system for the simultaneous culture of two three-dimensional (3D) research models. The device presented in this article was used to simultaneously culture a model of a blood vessel composed of endothelial cells (HUVEC) developed using the Viscous Finger Patterning (VFP) technique and a model of the pancreatic islet, which was developed using a co-culture of α and β cells. During the research, device production method was optimized, and for this purpose, the most precise micro-milling technique was compared with the rapid prototyping technique - 3D printing. The spatial arrangement of cells in the developed models, their morphology, and viability were visualized using fluorescence staining and confocal microscopy analysis. This article presents preliminary research to develop a long-term culture of a complex model imitating the connection between the microvessel and the pancreatic islet, which in the future will be used to develop new therapeutic strategies or generate fully functional islets.

The Role of Fibroblasts in Skin Homeostasis and Repair.

Fibroblasts are typical mesenchymal cells widely distributed throughout the human body where they (1) synthesise and maintain the extracellular matrix, ensuring the structural role of soft connective tissues; (2) secrete cytokines and growth factors; (3) communicate with each other and with other cell types, acting as signalling source for stem cell niches; and (4) are involved in tissue remodelling, wound healing, fibrosis, and cancer. This review focuses on the developmental heterogeneity of dermal fibroblasts, on their ability to sense changes in biomechanical properties of the surrounding extracellular matrix, and on their role in aging, in skin repair, in pathologic conditions and in tumour development. Moreover, we describe the use of fibroblasts in different models (e.g., in vivo animal models and in vitro systems from 2D to 6D cultures) for tissue bioengineering and the informative potential of high-throughput assays for the study of fibroblasts under different disease contexts for personalized healthcare and regenerative medicine applications.

Biochemical role of FOXM1-dependent histone linker H1B in human epidermal stem cells

Epidermal stem cells orchestrate epidermal renewal and timely wound repair through a tight regulation of self-renewal, proliferation, and differentiation. In culture, human epidermal stem cells generate a clonal type referred to as holoclone, which give rise to transient amplifying progenitors (meroclone and paraclone-forming cells) eventually generating terminally differentiated cells. Leveraging single-cell transcriptomic data, we explored the FOXM1-dependent biochemical signals controlling self-renewal and differentiation in epidermal stem cells aimed at improving regenerative medicine applications. We report that the expression of H1 linker histone subtypes decrease during serial cultivation. At clonal level we observed that H1B is the most expressed isoform, particularly in epidermal stem cells, as compared to transient amplifying progenitors. Indeed, its expression decreases in primary epithelial culture where stem cells are exhausted due to FOXM1 downregulation. Conversely, H1B expression increases when the stem cells compartment is sustained by enforced FOXM1 expression, both in primary epithelial cultures derived from healthy donors and JEB patient. Moreover, we demonstrated that FOXM1 binds the promotorial region of H1B, hence regulates its expression. We also show that H1B is bound to the promotorial region of differentiation-related genes and negatively regulates their expression in epidermal stem cells. We propose a novel mechanism wherein the H1B acts downstream of FOXM1, contributing to the fine interplay between self-renewal and differentiation in human epidermal stem cells. These findings further define the networks that sustain self-renewal along the previously identified YAP-FOXM1 axis.

Quality Control in Human Adipose-Derived Stromal/Stem Cells and Tissue Engineering Fat Models for Aging Studies.

Adipose tissue is recognized not only as an endocrine organ but also as a reservoir for adipose-derived stromal/stem cells (ASCs). ASCs have stimulated the interest of both the scientific and medical communities due to their therapeutic potential and applications in tissue engineering and regenerative medicine. ASCs are leveraged for their multipotency and their paracrine function. ASC behavior is highly variable and donor dependent. Donor age, body mass index, disease status, sex, and ethnicity can lead to differential overall function and quality. The impact of donor age and passage on ASC behavior has been well documented, impacting cell proliferation and differentiation potential and thus must be taken into careful consideration when conducting in vitro studies. Pooling of ASCs from different donors reduces heterogeneity among individual donors and produces ASCs with a consistent differentiation and paracrine profiles, an advantage for studies in biological aging. This chapter provides a detailed overview for studies related to quality control for ASC pools considering biological and chronological aging in ASCs. There are hallmarks of biological aging and specific assays associated with the evaluation of each hallmark. Nevertheless, here we present the assays that provide a standardized characterization and qualification of donor pools for their regenerative potential, considering chronological and biological age of the pool. The assays included in this chapter are considered quality control standards to evaluate cell proliferation, differentiation, colony-forming units, and cellular senescence from different donor age and cell passage cohorts.

Sensing and guiding cell-state transitions by using genetically encoded endoribonuclease-mediated microRNA sensors.

Precisely sensing and guiding cell-state transitions via the conditional genetic activation of appropriate differentiation factors is challenging. Here we show that desired cell-state transitions can be guided via genetically encoded sensors, whereby endogenous cell-state-specific miRNAs regulate the translation of a constitutively transcribed endoribonuclease, which, in turn, controls the translation of a gene of interest. We used this approach to monitor several cell-state transitions, to enrich specific cell types and to automatically guide the multistep differentiation of human induced pluripotent stem cells towards a haematopoietic lineage via endothelial cells as an intermediate state. Such conditional activation of gene expression is durable and resistant to epigenetic silencing and could facilitate the monitoring of cell-state transitions in physiological and pathological conditions and eventually the 'rewiring' of cell-state transitions for applications in organoid-based disease modelling, cellular therapies and regenerative medicine.

Enhanced electrical conductivity and mechanical property with antioxidant hydrogel for neural injury repair: In vitro analysis

The combined effect of endogenous electrical conductivity and antioxidant properties is a promising strategy for repairing and regenerating injured spinal cord tissue. Here, we focus on the development of biocompatible, antioxidant hydrogel scaffold with conductivity and modulus similar to the native spinal cord based on Hyaluronic acid (HA)/Histidine (His)/ Gelatin (Gel) with polyaniline (PANI). The physiochemical characterizations of the prepared materials were analyzed via NMR, FT-IR, XRD, SEM, and TEM techniques. The HA-His-Gel-PANI hydrogel's electrical conductivity and compressive modulus observed were 0.02 S/cm and 2.18 ± 0.68 kPa, matching the native spinal tissues. The in vitro studies of HA-His-Gel-PANI hydrogel against the PC-12 cell line revealed that the prepared conductive hydrogel shows higher cell viability, antioxidant, and cell migration properties. Thus, HA-His-Gel-PANI hydrogel shows a promising ability for neural injury regeneration and may improve the therapeutic application of neural injury regenerative medicine.