Plasmonic Applications Research Articles

High-efficiency light manipulation using a single layer of folded graphene microribbons

Since its one-atom thickness, it remains an open question to enhance light–matter interactions in graphene, which is usually implemented through external resonant structures such as Fabry–Perot cavity. Here, we propose an alternative scheme to enhance light–matter interactions in a single layer of folded graphene microribbons (FGMRs), and remarkably, for normal incidences rather than oblique incidences in most studies. By optimizing structural parameters (e.g., the location of folding axis and folding angle), three light manipulations such as perfect absorption, perfect reflection, and perfect transmission can be achieved independently. More interestingly, any one of the three functionalities can be actively switched to the other via changing material parameters (Fermi level and carrier mobility ), which is actually the most attractive feature of graphene plasmonics. Finally, we show FGMRs can also support triple functionalities, i.e., via changing material parameters, one of the three functionalities can be switched to the second one and then the third one. Our results will be of great interest to fundamental physics and pave the way for graphene plasmonic device applications.

Piezo inkjet formation of Ag nanoparticles from microdots arrays for surface plasmonic resonance

The study aims to explore a novel approach for fabricating plasmonic nanostructures to enhance the optical properties and performance of various optoelectronic devices. The research begins by employing a piezo-inkjet printing technique to deposit drops containing Ag nanoparticles (NPs) onto a glass substrate at a predefined equidistance, with the goal of obtaining arrays of Ag microdots (Ag-µdots) on the glass substrate. This process is followed by a thermal annealing treatment. The printing parameters are first optimized to achieve uniform deposition of different sizes of Ag-µdots arrays by controlling the number of Ag ink drops. Subsequently, the printed arrays undergo thermal annealing at various temperatures in air for 60 min, enabling precise and uniform control over nanoparticle formation. The printed Ag nanoparticles are characterized using field emission scanning electron microscopy and atomic force microscopy to analyze their morphological features, ensuring their suitability for plasmonic applications. UV–Vis spectrophotometry is employed to investigate the enhanced surface-plasmonic-resonance properties of the printed AgNPs. Measurements confirm that the equidistant arrays of AgNPs obtained from annealing Ag microdots exhibit enhanced light-matter interaction, leading to a surface plasmon resonance response dependent on the Ag NPs’ specific surface area. These enhanced surface plasmonic resonances open avenues for developing cutting-edge optoelectronic devices that leverage the benefits of plasmonic nanostructures, thereby enabling new opportunities for future technological developments across various fields.

Probing Temperature-Induced Plasmonic Nonlinearity: Unveiling Opto-Thermal Effects on Light Absorption and Near-Field Enhancement.

Precise measurement and control of local heating in plasmonic nanostructures are vital for diverse nanophotonic devices. Despite significant efforts, challenges in understanding temperature-induced plasmonic nonlinearity persist, particularly in light absorption and near-field enhancement due to the absence of suitable measurement techniques. This study presents an approach allowing simultaneous measurements of light absorption and near-field enhancement through angle-resolved near-field scanning optical microscopy with iterative opto-thermal analysis. We revealed gold thin films exhibit sublinear nonlinearity in near-field enhancement due to nonlinear opto-thermal effects, while light absorption shows both sublinear and superlinear behaviors at varying thicknesses. These observations align with predictions from a simple harmonic oscillation model, in which changes in damping parameters affect light absorption and field enhancement differently. The sensitivity of our method was experimentally examined by measuring the opto-thermal responses of three-dimensional nanostructure arrays. Our findings have direct implications for advancing plasmonic applications, including photocatalysis, photovoltaics, photothermal effects, and surface-enhanced Raman spectroscopy.

Temporally deuterogenic plasmonic vortices

Abstract Over the past decade, orbital angular momentum has garnered considerable interest in the field of plasmonics owing to the emergence of surface-confined vortices, known as plasmonic vortices. Significant progress has been made in the generation and manipulation of plasmonic vortices, which broadly unveil the natures of plasmonic spin–orbit coupling and provide accessible means for light–matter interactions. However, traditional characterizations in the frequency domain miss some detailed information on the plasmonic vortex evolution process. Herein, an exotic spin–orbit coupling phenomenon is demonstrated. More specifically, we theoretically investigated and experimentally verified a temporally deuterogenic vortex mode, which can be observed only in the time domain and interferes destructively in the intensity field. The spatiotemporal evolution of this concomitant vortex can be tailored with different designs and incident beams. This work extends the fundamental understanding of plasmonic spin–orbit coupling and provides a unique optical force manipulation strategy, which may fuel plasmonic research and applications in the near future.

Taking advantage of an axisymmetric plasmonic structure and grooves to nanofocus and ultraenhance a radially polarized electric field

This study investigates the enhancement and nanofocusing of a radially polarized electric field by a conical plasmonic structure (CPS). The CPS is a dielectric cone with nanometer metal cladding on a dielectric substrate. Concentric circular slanted grooves are etched on the surface of the dielectric substrate. These grooves converge the incident field on the structure. Angled periodic gratings are engraved on the CPS metal surface near the tip, creating a plasmonic momentum and contributing to the field enhancement above the apex. The symmetry of the incident radially polarized light and the structure significantly boosts nanofocusing and field enhancement. The optimal width of the nanofocusing and the electric field enhancement factor obtained are approximately 9 nm and 30000, respectively. Because of its impressive effects, this scheme is a valuable tool for plasmonic, optics, and laser applications.

Observation of Plasmonics Talbot effect in graphene nanostructures

We report on the theoretical models of the plasmoincs Talbot effect in graphene nanostructure. The Talbot effect for the plasmonics applications in the IR range is theoretically studied and the respective Talbot effect for the novel advanced plasmonics structures are numerically investigated for the first time. It is shown that the metamaterial structures with periodic grating configuration represents a complex three-dimensional lattice of beamlet-like graphene plasmonics devices. The calculated results agree well with the experimental ones. The results obtained can be used to create and optimize the structures considering diffraction limit for a wide range of application areas. Effective focusing of plasmonic waves with exact focal spots and a subwavelength full width at half maximum can be obtained by using periodic graphene grating.

Protein-Assisted Large-Scale Assembly and Differential Patterning of DNA Origami Lattices.

Nanofabrication has experienced a big boost with the invention of DNA origami, enabling the production and assembly of complex nanoscale structures that may be able to unlock fully new functionalities in biology and beyond. The remarkable precision with which these structures can be designed and produced is, however, not yet matched by their assembly dynamics, which can be extremely slow, particularly when attached to biological templates, such as membranes. Here, the rapid and controlled formation of DNA origami lattices on the scale of hundreds of micrometers in as little as 30minutes is demonstrated, utilizing active patterning by the E.coli Min protein system, thereby yielding a remarkable improvement over conventional passive diffusion-based assembly methods. Various patterns, including spots, inverse spots, mazes, and meshes can be produced at different scales, tailored through the shape and density of the assembled structures. The differential positioning accomplished by Min-induced diffusiophoresis even allows the introduction of "pseudo-colors", i.e., complex core-shell patterns, by simultaneously patterning different DNA origami species. Beyond the targeted functionalization of biological surfaces, this approach may also be promising for applications in plasmonics, catalysis, and molecular sensing.

Magneto-plasmonic scattering by a disk-shaped particle made of an artificial dielectric

The main features of artificial dielectrics are high anisotropy and controllable heterogeneity, as well as adjustable values of their synthesized material parameters. In this work, we numerically study the scattering features of a disk-shaped particle made of an artificial dielectric (finely stratified structure, FSS) that is composed of magnetic and semiconductor constituents influenced by an external static magnetic field. The tensor-valued permittivity and permeability of the FSS are derived involving the effective medium theory. Due to a specific composition of the FSS, the material properties of the disk simultaneously acquire electric and magnetic gyrotropy, which depends on the proportion of the semiconductor and magnetic components included in the FSS. It is supposed that the ferromagnetic and plasma resonances of the constitutive materials are closely spaced. In particular, we examine the electric and magnetic dipole contributions to the scattering and absorption cross-sections obtained in the framework of the multipole decomposition method while accounting for the polarizability and magnetization induced in the particle by the field of incoming radiation. By varying the proportion of components of the artificial dielectric, we demonstrate the magneto-plasmonic functionality of the particle. Our presentation generalizes and complements several known solutions obtained separately for either magnetic or dielectric anisotropic particles. This approach can be used to study magneto-optical effects in metamaterials and metasurfaces composed of an ensemble of gyroelectric and gyromagnetic particles that is important for both plasmonic and photonic applications.

Thermal Stability of Au Rhombic Dodecahedral Nanocrystals Can Be Greatly Enhanced by Coating Their Surface with an Ultrathin Shell of Pt.

Rhombic dodecahedral nanocrystals have been considered particularly difficult to synthesize because they are enclosed by {110}, a low-index facet with the greatest surface energy. Recently, we demonstrated the use of seed-mediated growth for the facile and robust synthesis of Au rhombic dodecahedral nanocrystals (AuRD). While the unique shape and surface structure of AuRD are desirable for potential applications in plasmonics and catalysis, respectively, their high surface energy makes them highly susceptible to thermal degradation. Here we demonstrate that it is feasible to greatly improve the thermal stability with some sacrifice to the plasmonic properties of the original AuRD by coating their surface with an ultrathin shell made of Pt. Our in situ electron microscopy analysis indicates that the ultrathin Pt coating can increase the thermal stability from 60 up to 450 °C, a trend that is also supported by the results from a computational study.

Substrate interaction mediated control of phase separation in FIB milled Ag–Cu thin films

Nanofabrication is an integral part of the realization of advanced functional devices ranging from optical displays to memory devices. Focused-ion beam (FIB) milling is one of the most widely used nanofabrication methods. Conventionally, FIB milling has been carried out for patterning single-phase stable thin films. However, the influence of FIB milling on the phase separation of metastable alloy films during subsequent treatments has not been reported. Here, we show how FIB milling of Ag–Cu thin films influences the separation process and microstructure formation during post-milling annealing. The phase-separated microstructure of the film consists of fine, randomly distributed Ag-rich and Cu-rich domains, whereas adjacent to milled apertures (cylindrical holes), we observe two distinctly coarser rings. A combination of imaging and analysis techniques reveals Cu-rich islands dispersed in Ag-rich domains in the first ring next to the aperture, while the second ring constitutes mostly of Ag-rich grains. Copper silicide is observed to form in and around apertures through reaction with the Si-substrate. This substrate interaction, in addition to known variables like composition, temperature, and capillarity, appears to be a key element in drastically changing the local microstructure around apertures. Thus, the current study introduces new avenues to locally modulate the composition and microstructure through an appropriate choice of the film-substrate system. Such an ability can be exploited further to tune device functionalities for possible applications in plasmonics, catalysis, microelectronics, and magnetics.

Evidence of high electron mobility in magnetic kagome topological metal FeSn thin films.

We present a systematic study of the low-energy electrodynamics of the magnetic FeSn kagome metal, which hosts both topological (Dirac) and non-trivial states. Our results reveal that the optical conductivity of FeSn shows two Drude contributions that can be associated with the linear (Dirac) and parabolic (massive) bands, with a dominance of the former to the DC conductivity at low temperatures. The weight of the Drude response shifts toward lower frequencies upon cooling due to a rapid increase in the Dirac electron mobility, which we associate with a temperature suppression of e-ph scattering. The experimental interband dielectric function is in very good agreement with that calculated within Density Functional Theory (DFT). These results provide a full description of the charge dynamics in FeSn kagome topological metal, opening the road for its use in photonic and plasmonic applications.

Hot carrier creation in a nanoparticle dimer-molecule composite.

Light-matter interactions have garnered considerable interest owing to their burgeoning applications in quantum optics and plasmonics. Utilizing first principles calculations, this work explores the hot carrier (HC) generation and distribution within a composite system made up of a plasmonic nanoparticle dimer and linear polycyclic aromatic hydrocarbon (PAH) molecules. We examine the spatial and energetic distributions of HCs by initiating photoexcitation and allowing localized surface plasmon dephasing. By positioning PAH molecules within the plasmonic nanodimer's gap region, our investigation uncovers HC tuning. Notably, depending on the size of the PAH molecules, there are significant alterations in the HC distribution. Hot electrons (HEs) are distributed across both the nanodimer and the PAH molecule, while hot holes (HHs) become entirely localized on the PAH as the PAH grows larger. These findings improve our understanding of plasmon-molecule coupled states and provide guidance on how to customize HC distributions through the creation of hybrid plasmonic materials.

Uniform colloidal synthesis of highly branched chiral gold nanoparticles.

We present a uniform colloidal synthesis of highly branched gold nanoparticles (GNPs) including nanospheres, nanoplatelets and nanorods by cysteine-assisted seeded growth. The highly branched GNPs show blackbody-like absorption and chirality simultaneously, holding great potential for plasmonic or photothermal applications.

Raman Microscopy Identification of Secondary Spurious Phases in Molten GdSr2RuCu2O8-δ Superconductor for Photonics and Plasmonic Applications

Plasmonic and Photonics applications of superconducting materials, suggested at first by the necessity to minimize the dissipative losses of conventional metals in the high frequency ranges, are topics of growing interest in Optics. In this perspective, GdSr2RuCu2O8-δ (Gd1212) Rutheno-Cuprate Superconductor presents very promising properties, showing both superconducting and magnetically ordered phases coexisting in the same cell. To investigate its features, the fabrication of macroscopic crystallographically oriented samples is necessary. The use of melt texturing techniques has shown to be among the most effective ways to achieve the best characteristics, although the fabrication of high-quality Gd1212 samples is intrinsically difficult. To reach a better understanding of Gd1212 incongruent melting reaction, a series of bulk samples annealed at temperatures below and above the melting temperature was prepared. Raman Microscopy and Mapping performed on molten and re-solidified samples revealed the presence of different phases, corresponding to those identified in our previous studies. These observations were also confirmed by XRD, TGA-DTA, and SEM+EDS characterisations. Secondary phases formation showed a strong dependence on the temperature of the annealing treatments. Susceptibility and magnetization measurements show both superconducting and magnetic transitions and a contribution of different spurious magnetic phases as suggested by EDS.

Gentle tension stabilizes atomically thin metallenes.

Metallenes are atomically thin two-dimensional (2D) materials lacking a layered structure in the bulk form. They can be stabilized by nanoscale constrictions like pores in 2D covalent templates, but the isotropic metallic bonding makes stabilization difficult. A few metallenes have been stabilized but comparison with theory predictions has not always been clear. Here, we use density-functional theory calculations to explore the energetics and dynamic stabilities of 45 metallenes at six lattices (honeycomb, square, hexagonal, and their buckled counterparts) and varying atomic densities. We found that of the 270 different crystalline lattices, 128 were dynamically stable at sporadic densities, mostly under tensile strain. At the energy minima, lattices were often dynamically unstable against amorphization and the breaking down of metallene planarity. Consequently, the results imply that crystalline metallenes should be seen through a novel paradigm: they should be considered not as membranes with fixed structures and lattice constants but as yielding membranes that can be stabilized better under tensile strain and low atomic density. Following this paradigm, we rank the most promising metallenes for 2D stability and hope that the paradigm will help develop new strategies to synthesize larger and more stable metallene samples for plasmonic, optical, and catalytic applications.

Towards the epitaxial growth of Au thin films on MgO substrates for plasmonic applications

Surface Plasmon Polaritons (SPPs) in Au thin films are nowadays intensively exploited for sensing applications that leverage the strong optical field confinement at the metal/dielectric interface and the easy functionalization of the Au surface. Moreover, Au thin films represent one of the common starting points for the top-down nanofabrication of plasmonic nanostructures supporting localized resonances. In this framework, strategies for the growth of high-quality Au films on transparent substrates are crucial and not yet fully established. In this study, we exploit MgO(001) substrates for the growth of thin (about 45 nm) Au films, also including an additional buffer layer of Fe. We successfully demonstrate Au samples with reduced roughness and presenting Low-Energy Electron Diffraction (LEED) features, indicating a high degree of crystalline ordering. This is supported by the experimental evidence of an increased (by almost a factor of 3) propagation length compared to a reference Au sample grown on standard glass slides, which is however still significantly lower than the one expected from first principles.

Designing a square periodic racemic helix photonic metamaterial using phase-controlled interference lithography for tailored chiral response

In this study, we propose a double exposure phase-controlled laser interference lithography (DE-PCLIL) approach in 4 + 1 beams interference to design a three-dimensional (3D) racemic helical periodic nanostructure. The explicit azimuthal rotation of each beam by π/2 between the two exposures and the resultant intensity distribution discover the racemic 3D helix structure arranged in the square unit cell. The proof of concept is experimentally demonstrated by recording a series of cross-sectional images at different z-planes of the volumetric interference pattern on a CMOS camera using a spatial light modulator (SLM). Additionally, we propose an approach to realize tapering in such a geometry through a slight variation of the interference angle in both exposures. We numerically investigated optical modes and circular dichroism (CD) characteristics of the racemic helix metamaterial. The racemic helix metamaterial structure offers an angle of incidence and polarization-insensitive coupled mode. Through numerical studies, we propose an alternative way to bring 3.4-fold CD signal enhancement by varying the phase of a particular handed helix only through modulating the local chiral field. Such 3D structure is profound with perfect absorption in broad spectral regions, potentially suited for plasmonic absorber-based photovoltaic and photo-catalysis applications.

Atomic Layer Deposition for Tailoring Tamm Plasmon-Polariton with Ultra-High Accuracy

In this study, we demonstrate the potential capability to control Tamm plasmon-polaritons (TPP) by applying atomic layer deposition (ALD) as a highly precise technique for plasmonic applications. Applications in plasmonics usually require tens of nanometers or less thick layers; thus, ALD is a very suitable technique with monolayer-by-monolayer growth of angstrom resolution. Spectroscopic ellipsometry and polarized reflection intensity identified the TPP resonances in the photonic band gap (PBG) formed by periodically alternating silicon oxide and tantalum oxide layers. The sub-nanometer control of the Al2O3 layer by ALD allows precise tailoring of TPP resonances within a few nanometers of spectral shift. The employing of the ALD method for the fabrication of thin layers with sub-nanometer thickness accuracy in more complex structures proves to be a versatile platform for practical applications where tunable plasmonic resonances of high quality are required.

Controlling Vertical Asymmetry of Nanocrystals Through Anisotropic Etching‐Assisted Nanosphere Lithography

Nanosphere lithography, a low‐cost fabrication technique, depends on the self‐assembly of nanoscale features to create nanostructures in a hexagonally close‐packed structure. In this article, the fabrication of 3D nanostructures over a large surface‐area with anisotropy along the growth direction through the combination of chemical and physical plasma etching is reported. The anisotropy stems from etching the nanosphere mask and the substrate at different rates. Due to the dynamic masking effect, a systematic variation of etching time gives rise to intriguing nanostructures with sharp edges that have strong potential for plasmonic applications, with the possibility of manipulating electromagnetic radiation. The structures obtained include nanocylinders, truncated hexagon‐based pyramids, circular pads on a conical base, and nanocones from a single‐layer nanosphere mask. Simulations of the fabrication process offer further insight into the understanding of nanostructure formation. A good agreement between predicted results and experiments confirms the potential of our numerical design. In addition, the optical properties of the nanostructures are investigated by UV–vis and the experimental findings are consistent with simulations based on a finite‐difference time‐domain method. The nanostructures described in this study contribute to the emerging 3D plasmonics and 3D magnonics, with strong potential for a significant impact on biosensor applications.

Ag Surface Segregation in Sub-10-nm Bimetallic AuAg Nanoparticles Quantified by STEM-EDS and Machine Learning: Implications for Fine-Tuning Physicochemical Properties for Plasmonics and Catalysis Applications

Ag Surface Segregation in Sub-10-nm Bimetallic AuAg Nanoparticles Quantified by STEM-EDS and Machine Learning: Implications for Fine-Tuning Physicochemical Properties for Plasmonics and Catalysis Applications