Photothermal Therapy Applications Research Articles

A Cyanine with 83.2% Photothermal Conversion Efficiency and Absorption Wavelengths over 1200 nm for Photothermal Therapy.

Developing small-molecule photothermal agents (PTAs) with good near-infrared-II (NIR-II) response for deeper tissue penetration and minimizing damage to healthy tissues has attracted much attention in photothermal therapy (PTT). However, concentrating ultra-long excitation wavelengths and high photothermal conversion efficiencies (PCEs) into a single organic small molecule is still challenging due to the lack of suitable molecular structures. Here, six polymethine cyanine molecules based on the structure of indocyanine green are synthesized by increasing the conjugated structure of the two-terminal indole salts and the number of rigid methine units, and incorporating longer alkyl side chains into the indole salts. Ultimately, IC-1224 is obtained with an absorption wavelength of more than 1200nm, which has a high PCE up to 83.2% in the NIR-II window and exhibits excellent PTT tumor ablation performance. This provides a high-performance NIR-II-responsive PTA, and offers further possibilities for the application of PTT in biomedical fields.

Polysaccharide-Based Micro/Nanomotors for Active Ingredient Delivery in Food.

Micro/nanomotors (MNMs) are miniature devices that can generate energy through chemical reactions or physical processes, utilizing this energy for movement. By virtue of their small size, self-propulsion, precise positioning within a small range, and ability to access microenvironments, MNMs have been applied in various fields including sensing, biomedical applications, and pollutant adsorption. However, the development of food-grade MNMs and their application in food delivery systems have been scarcely reported. Currently, there are various issues with the decomposition, oxidation, or inability to maintain the activity of some nutrients or bioactive substances, such as the limited application of curcumin (Cur) in food. Compared to traditional delivery systems, MNMs can adjust the transport speed and direction as needed, effectively protecting bioactive substances during delivery and achieving efficient transportation. Therefore, this study utilizes polysaccharides as the substrate, employing a simple, rapid, and pollution-free template method to prepare polysaccharide-based microtubes (PMTs) and polysaccharide-based micro/nanomotors (PMNMs). PMNMs can achieve multifunctional propulsion by modifying ferrosoferric oxide (Fe3O4), platinum (Pt), and glucose oxidase (GOx). Fe-PMNMs and Pt-PMNMs exhibit excellent photothermal conversion performance, showing promise for applications in photothermal therapy. Moreover, PMNMs can effectively deliver curcumin, achieving the effective delivery of nutrients and exerting the anti-inflammatory performance of the system.

Bi2Se3 nanosheets prepared by solvothermal method for high performance NIR photodetector

Bismuth selenide (Bi2Se3) nanosheets, a member of the AV-BVI (A = Sb, Bi, B = S, Se, Te) family of metal chalcogenide semiconductor materials, have a large surface area, a tunable bandgap that is dependent on the thickness of the atomic layer, and potential applications in photocatalysis, photothermal therapy, and photodetectors, among other fields. Here, we describe the synthesis of Bi2Se3 nanosheets using a simple solvothermal method, resulting in a smooth surface and a well-crystalline structure. The XRD results indicate that the Bi2Se3 nanosheets belong to the hexagonal crystal structure, with lattice constants of a = 0.4140 nm, b = 0.4140 nm, and c = 2.8636 nm. Bi2Se3 nanosheet photodetectors, which have a Schottky contact between the nanosheets and the electrodes, exhibit a notable light response to an 850 nm laser. The device displays a switch ratio of 50 when operated at a voltage of 0.6 V and an irradiance of 2.87 W/cm2 (@ 850 nm). The switching speed of the device was measured in terms of rise and decay times, measured to be 126 ms and 85 ms respectively. It is evident from the obtained results that high performance nanoscale photodetectors can be made efficiently from 2D Bi2Se3 nanosheets.

Polylysine-modified near-infrared-emitting carbon dots assemblies: Amplification of tumor accumulation for enhanced tumor photothermal therapy

A key challenge to enhance the therapeutic outcome of photothermal therapy (PTT) is to improve the efficiency of passive targeted accumulation of photothermal agents at tumor sites. Carbon dots (CDs) are an ideal choice for application as photothermal agents because of their advantages such as adjustable fluorescence, high photothermal conversion efficiency, and excellent biocompatibility. Here, we synthesized polylysine-modified near-infrared (NIR)-emitting CDs assemblies (plys-CDs) through post-solvothermal reaction of NIR-emitting CDs with polylysine. The encapsulated structure of plys-CDs was confirmed by determining morphological, chemical, and luminescent properties. The particle size of CDs increased to approximately 40 ± 8 nm after polylysine modification and was within the size range appropriate for achieving superior enhanced permeability and retention effect. Plys-CDs maintained a high photothermal conversion efficiency of 54.9 %, coupled with increased tumor site accumulation, leading to a high efficacy in tumor PTT. Thus, plys-CDs have a great potential for application in photothermal ablation therapy of tumors.

Camptothecin-loaded and IR780-doped polydopamine nanomedicine used for multifunctional chemo-photothermal-photodynamic therapy for lung cancer

Lung cancer poses a major threat to human health. Camptothecin (CPT), a cytotoxic alkaloid derived from pyrroloquinoline, ranks alongside paclitaxel as the most widely studied natural broad-spectrum antitumor drug. However, poor water solubility and instability of the lactone ring hinder its clinical application. To improve the efficacy of CPT in lung cancer, we developed a polydopamine (PDA) nanoparticle formulation combined with photothermal therapy (PTT). Although PDA nanocrystals have good biocompatibility and excellent PTT conversion ability, their high-temperature PTT application tends to adversely affect normal tissues. By doping the surface of PDA nanoparticles with IR780, a near-infrared photosensitiser, a CPT-loaded PDA nanoparticle (CPT-PDA-IR780) was designed that was easy to modify and had strong adhesion. This formulation was used for lung cancer treatment. Due to the incorporation of a photosensitiser, CPT-PDA-IR780 nanomaterials showed better low temperature PTT properties and demonstrated significant anti-lung cancer effects both in vivo and in vitro. By combining chemotherapy and photodynamic therapy (PDT), this nanomedicine achieved better efficacy in low-temperature PTT for lung cancer. These findings provide a scientific basis for the development of CPT nanomaterials and for the treatment of lung cancer with low-temperature PTT through combination therapy.

In vitro anticancer activity of melanin-like nanoparticles for multimodal therapy of glioblastoma

Abstract Glioblastoma (GBM) is one of the most aggressive and hard to treat cancers. Traditional anti-cancer treatment methods have low efficiency and the lifespan after diagnosis is only 12–18 months. Brain tumor cells overexpress many proteins that play an important role in tumor progression and can be used as therapeutic targets. One of the promising approaches in cancer treatment is down-regulation of an extracellular matrix glycoprotein – Tenascin-C (TN-C) through RNA interference therapy. However, the effective delivery of double stranded RNA with one strand complementary to TN-C mRNA sequence is difficult due to rapid degradation by nucleases and low intracellular uptake. Polydopamine (PDA), a biomimetic polymer characterized by high biocompatibility and simple modification ability, is commonly used in nanobiomedicine to create a drug/gene delivery vehicle. Furthermore, photothermal characteristics of this polymer enable its application in photothermal therapy (PTT), which is a great option for cancer treatment. Here we synthesize PDA nanoparticles (NPs) coated with polyamidoamine dendrimers generation 3.0 (DD3.0) for therapeutic anti-TN-C RNA and doxorubicin delivery. As prepared PDA@DD3.0 NPs are then used in combined drug delivery, gene silencing, and PTT of GBM. The obtained materials are analyzed in terms of physicochemical and photothermal properties as well as their cytotoxicity, using human GBM cells. The results demonstrate that the obtained nanocarriers are effective non-viral vehicle for combined therapeutic approach for killing glioma cells via anti-TN-C RNA delivery and combined chemo-PTT therapy (CT-PTT). The application of PDA@DD3.0 NPs contributed to the 3-fold reduction in the proliferation rate of GBM cells, a decrease in the level of TN-C expression (by 30%) and a reduction in the number of viable cells by up to 20%.

Electrospun PAN/BaTiO3/MXene nanofibrous membrane with significantly improved piezoelectric property for self-powered wearable sensor

The power supply system is an important part of modern electronic equipment. Traditional batteries have disadvantages such as large volume and poor flexibility. Nanogenerators possess characteristics such as miniaturization, sustainable power supply, and independence from external energy sources. In this work, a piezo-triboelectric hybridized nanogenerator is developed. Barium titanate (BaTiO3) and MXene (Ti3C2) are incorporated into the electrospinning process of polyacrylonitrile (PAN), resulting in an electrospun PAN/BaTiO3/MXene nanofibrous membrane with significantly enhanced piezoelectric properties in comparison with the pure PAN fibrous membrane. Meanwhile, the electronegative properties of the PAN/BaTiO3/MXene nanofibrous membrane are augmented as the negative layer during contact and separation friction. The piezoelectric output voltage of the PAN/BaTiO3/MXene nanofibrous membrane reaches up to 6.4 V. When a nickel-copper conductive fabric is used as the positive layer, the piezo-triboelectric hybridized nanogenerator produces an output voltage of 11.3 V, an output current of 300nA, and a maximum output power density of 3.4 mW·m−2 over a contact-separation area of only 2 × 2 cm2. In addition, given that MXene itself exhibits excellent photothermal conversion ability, the PAN/BaTiO3/MXene nanofibrous membrane can be quickly heated up to about 54℃ under near-infrared irradiation at a power of 0.8 W·cm−2, highlighting its potential in photothermal-therapy applications.

Elastic Liposomes Containing Calcium/Magnesium Ferrite Nanoparticles Coupled with Gold Nanorods for Application in Photothermal Therapy.

This work reports on the design, development, and characterization of novel magneto-plasmonic elastic liposomes (MPELs) of DPPC:SP80 (85:15) containing Mg0.75Ca0.25Fe2O4 nanoparticles coupled with gold nanorods, for topical application of photothermal therapy (PTT). Both magnetic and plasmonic components were characterized regarding their structural, morphological, magnetic and photothermal properties. The magnetic nanoparticles display a cubic shape and a size (major axis) of 37 ± 3 nm, while the longitudinal and transverse sizes of the nanorods are 46 ± 7 nm and 12 ± 1.6 nm, respectively. A new methodology was employed to couple the magnetic and plasmonic nanostructures, using cysteine as bridge. The potential for photothermia was evaluated for the magnetic nanoparticles, gold nanorods and the coupled magnetic/plasmonic nanoparticles, which demonstrated a maximum temperature variation of 28.9 °C, 33.6 °C and 37.2 °C, respectively, during a 30 min NIR-laser irradiation of 1 mg/mL dispersions. Using fluorescence anisotropy studies, a phase transition temperature (Tm) of 35 °C was estimated for MPELs, which ensures an enhanced fluidity crucial for effective crossing of the skin layers. The photothermal potential of this novel nanostructure corresponds to a specific absorption rate (SAR) of 616.9 W/g and a maximum temperature increase of 33.5 °C. These findings point to the development of thermoelastic nanocarriers with suitable features to act as photothermal hyperthermia agents.

Cell Membrane-Coated Biomimetic Nanoparticles in Cancer Treatment.

Nanoparticle-based drug delivery systems hold promise for cancer treatment by enhancing the solubility and stability of anti-tumor drugs. Nonetheless, the challenges of inadequate targeting and limited biocompatibility persist. In recent years, cell membrane nano-biomimetic drug delivery systems have emerged as a focal point of research and development, due to their exceptional traits, including precise targeting, low toxicity, and good biocompatibility. This review outlines the categorization and advantages of cell membrane bionic nano-delivery systems, provides an introduction to preparation methods, and assesses their applications in cancer treatment, including chemotherapy, gene therapy, immunotherapy, photodynamic therapy, photothermal therapy, and combination therapy. Notably, the review delves into the challenges in the application of various cell membrane bionic nano-delivery systems and identifies opportunities for future advancement. Embracing cell membrane-coated biomimetic nanoparticles presents a novel and unparalleled avenue for personalized tumor therapy.

Nucleophilic Aromatic Substitution (SNAr) as an Approach to Challenging Nitrogen-Bridged BODIPY Oligomers.

A series of nitrogen-bridged BODIPY oligomers were synthesized via nucleophilic aromatic substitution (SNAr) as a convenient approach. Further transformations achieved novel α,α-aryl BODIPY dimers as well as a BODIPY hexamer efficiently. These BODIPY oligomers showed good photophysical properties, such as apparent absorption and emission both in visible and near-infrared regions. Interestingly, the high air and photothermal stability, strong NIR absorption, and high photothermal conversion rates of hexamer B6 suggest potential applications in photothermal therapy.

Antibacterial Properties of an Experimental Dental Resin Loaded with Gold Nanoshells for Photothermal Therapy Applications.

This study explored the chemical and antibacterial properties of a dental resin loaded with gold nanoshells (AuNPs) in conjunction with photothermal therapy (PTT) as a novel method against Streptococcus mutans (S. mutans) to prevent secondary caries. First, a 20-h minimum inhibitory concentration (MIC) assay was performed on solutions of AuNPs with planktonic S. mutans under an LED device and laser at 660 nm. Next, resin blends containing 0, 1 × 1010, or 2 × 1010 AuNPs/mL were fabricated, and the degree of conversion (DC) was measured using an FTIR spectroscopy. Lastly, a colony forming unit (CFU) count was performed following 24 h growth of S. mutans on 6 mm diameter resin disks with different light treatments of an LED device and a laser at 660 nm. The MIC results only showed a reduction in S. mutans at AuNP concentrations less than 3.12 µg/mL under a laser illumination level of 95.5 J/cm2 compared to the dark treatment (p < 0.010 for each). CFU and DC results showed no significant dependence on any light treatment studied. The AuNPs expressed antibacterial effects following PPT against planktonic S. mutans but not in a polymerized dental adhesive resin. Future studies should focus on different shapes, structure, and concentrations of AuNPs loaded in a resin blend.

Photothermal and ferroptosis synergistic therapy for liver cancer using iron-doped polydopamine nanozymes

An innovative nanozyme, iron-doped polydopamine (Fe-PDA), which integrates iron ions into a PDA matrix, conferred peroxidase-mimetic activity and achieved a substantial photothermal conversion efficiency of 43.5 %. Fe-PDA mediated the catalysis of H2O2 to produce toxic hydroxyl radicals (•OH), thereby facilitating lipid peroxidation in tumour cells and inducing ferroptosis. Downregulation of solute carrier family 7 no. 11 (SLC7A11) and solute carrier family 3 no. 2 (SLC3A2) in System Xc- resulted in decreased intracellular glutathione (GSH) production and inactivation of the nuclear factor erythroid 2-related factor 2 (NRF2)-glutathione peroxidase 4 (GPX4) pathway, contributing to ferroptosis. Moreover, the application of photothermal therapy (PTT) enhanced the effectiveness of chemodynamic therapy (CDT), accelerating the Fenton reaction for targeted tumour eradication while sparing adjacent non-cancerous tissues. In vivo experiments revealed that Fe-PDA significantly hampered tumour progression in mice, emphasizing the potential of the dual-modality treatment combining CDT and PTT for future clinical oncology applications.

Hyaluronic acid functionalized iron–platinum nanoparticles for photothermal therapy and photoacoustic imaging

This study represents an innovative approach to construct multi-functional nanoplatforms for cancer diagnosis and therapy by combining hyaluronic acid (HA) with iron-platinum nanoparticles (FePt NPs). These HA-coated FePt NPs, referred to as FePt@HA NPs, demonstrated remarkable biocompatibility, high absorption, and excellent light-to-heat conversion properties in the near-infrared (NIR) region, making them ideal candidates for photothermal therapy (PTT). In vitro studies revealed their effective cancer cell eradication under NIR laser irradiation, while in vivo experiments on mice showcased their superior heating capabilities. Moreover, FePt@HA NPs exhibited a distinct and strong photoacoustic (PA) signal, facilitating enhanced and precise intra-tumoral PA imaging. Our results highlight the potential of FePt@HA NPs as promising photothermal agents for future PTT applications. They offer high selectivity, precision, and minimal side effects in cancer treatment, along with their valuable PA imaging application for tumor localization and characterization.

High-performance pyrite nano-catalyst driven photothermal/chemodynamic synergistic therapy for Osteosarcoma

Osteosarcoma (OS) is an aggressive bone tumor with strong invasiveness, rapid metastasis, and dreadful mortality. Chemotherapy is a commonly used approach for OS treatment but is limited by the development of drug resistance and long-term adverse effects. To date, OS still lacks the curative treatment. Herein, we fabricated pyrite-based nanoparticles (FeS2@CP NPs) as synergetic therapeutic platform by integrating photothermal therapy (PTT) and chemo-dynamic therapy (CDT) into one system. The synthetic FeS2@CP NPs showed superior Fenton reaction catalytic activity. FeS2@CP NPs-based CDT efficaciously eradicated the tumor cells by initiating dual-effect of killing of apoptosis and ferroptosis. Furthermore, the generated heat from FeS2@CP under near-infrared region II (NIR-II) laser irradiation could not only inhibit tumor’s growth, but also promote tumor cell apoptosis and ferroptosis by accelerating •OH production and GSH depletion. Finally, the photothermal/NIR II-enhanced CDT synergistic therapy showed excellent osteosarcoma treatment effects both in vitro and in vivo with negligible side effects. Overall, this work provided a high-performance and multifunctional Fenton catalyst for osteosarcoma synergistic therapy, which provided a pathway for the clinical application of PTT augmented CDT.

Photothermal Hydrogel Composites Featuring G4-Carbon Nanomaterial Networks for Staphylococcus aureus Inhibition.

Microbial infections represent a significant health risk, often leading to severe complications and, in some cases, even fatalities. As a result, there is an urgent need to explore innovative drug delivery systems and alternative therapeutic techniques. The photothermal therapy has emerged as a promising antibacterial approach and is the focus of this study. Herein, we report the successful synthesis of two distinct supramolecular composite hydrogels by incorporating graphene oxide (GO) and single-walled carbon nanotubes (SWNTs) into guanosine quadruplex (G4) based hydrogels containing covalently bound β-cyclodextrin (β-CD). The G4 matrix was synthesized through a two-step process, establishing a robust network between G4 and β-CDs, followed by the encapsulation of either GO or SWNTs. Comprehensive characterization of these composite hydrogels were conducted using analytical techniques, including circular dichroism, Raman spectroscopy, rheological investigations, X-ray diffraction, and scanning electron microscopy. A notable discovery from the conducted research is the differential photothermal responses exhibited by the hydrogels when exposed to near-infrared laser irradiation. Specifically, SWNT-based hydrogels demonstrated superior photothermal performance, achieving a remarkable temperature increase of up to 52 °C, in contrast to GO-based hydrogels, which reached a maximum of 34 °C. These composite hydrogels showed good cytotoxicity evaluation results and displayed synergistic antibacterial activity against Staphylococcus aureus, positioning them as promising candidates for antibacterial photothermic platforms, particularly in the context of wound treatment. This study offers a valuable contribution to the development of advanced and combined therapeutic strategies for combating microbial infections and highlights the potential of carbon nanomaterial-enhanced supramolecular hydrogels in photothermal therapy applications.

Effect of PVP Molecular Weights on the Synthesis of Ultrasmall Cus Nanoflakes: Synthesis, Properties, and Potential Application for Phototheranostics.

Copper sulfide nanoparticles (CuS) hold tremendous potential for applications in photothermal therapy (PTT) and photoacoustic imaging (PAI). However, the conventional chemical coprecipitation method often leads to particle agglomeration issues. To overcome this challenge, we utilized polyvinylpyrrolidone (PVP) as a stabilizing agent, resulting in the synthesis of small PVP-CuS nanoparticles named PC10, PCK30, and PC40. Our study aimed to investigate how different molecular weights of PVP influence the nanoparticles' crystalline characteristics and essential properties, especially their photoacoustic and photothermal responses. While prior research on PVP-assisted CuS nanoparticles has been conducted, our study delves deeper into this area, providing insights into optical properties. Remarkably, all synthesized nanoparticles exhibited a crystalline structure, were smaller than 10 nm, and featured an absorbance peak at 1020 nm, indicating their robust photoacoustic and photothermal capabilities. Among these nanoparticles, PC10 emerged as the standout performer, displaying superior photoacoustic properties. Our photothermal experiments demonstrated significant temperature increases in all cases, with PC10 achieving an impressive efficiency of 51%. Moreover, cytotoxicity assays revealed the nanoparticles' compatibility with cells, coupled with an enhanced incidence of apoptosis compared to necrosis. These findings underscore the promising potential of PVP-stabilized CuS nanoparticles for advanced cancer theranostics.

Self-assembled Cu doped NiO loaded reduced graphene oxide: Multifunctional photothermal framework for interfacial water evaporation, disinfection and power generation

Development of self-assembled multifunctional photothermal materials is considered as reconciliation between solar energy harvesting and sustainable energy and environmental applications. Herein, we report strategically designed self-assembled Cu-doped-NiO nanoparticles loaded-rGO (rGO-Cu-NiO) framework. The self-assembly exhibited synergistic photothermal conversion, floatable porous structure for efficient capillary action enabling water transmission and quick steam escape pathways. The optimized rGO-Cu-NiO framework achieved interfacial water evaporation rate of 1.47 kgm−2h−1 with 92% conversion efficiency under 1Sun illumination. Maximum surface temperature of the framework displays 74 °C under 2Sun irradiation, making it highly feasible to be implemented as solar water purifier. Cell viability examination indicated the superior antimicrobial properties, making it a promising candidate for photothermal therapy application. Moreover, the self-assembled rGO-Cu-NiO framework integrated with the commercial thermoelectric module shows outstanding photothermal conversion efficiency to envisage its ability towards electrical power generation. Impressively, the amalgamation of the framework with the Bi2Te3 based commercial thermoelectric module proficiently reinforce the performance of the thermoelectric generator by offering an enhanced power output of 3.91 mW and appreciably high power density of 0.311 mW/cm2. Overall, the excellent stability, no photo-leaching, effectiveness to produce pure water from seawater, antimicrobial properties, recyclability, make rGO-Cu-NiO a perfect epitome of sustainable water treatment and power generation application.

Nanomedicine‐Enabled Mild Photothermal Therapy Strategies for Enhanced Antitumor Treatment

Photothermal therapy (PTT) has emerged as a promising approach for tumor ablation utilizing hyperthermia offers several advantages, including non‐invasiveness, spatiotemporal controllability, and notable therapeutic efficacy. However, the clinical application of PTT is challenged by the heat diffusion. To address this, mild PTT (mPTT) has gained attention as an alternative strategy, operating at temperatures below 45 °C, with remarkable antitumor effects and minimal thermal damage to nearby normal tissues. Despite these benefits, the expression of heat shock proteins (HSPs) induces thermal resistance, which limits the therapeutic potential and practical implementation of mPTT. Nanomedicines have emerged as a solution to overcome these challenges, offering improved solubility, prolonged circulation time, enhanced tumor accumulation, and controlled cargo release, surpassing the capabilities of small molecular HSP inhibitors. Herein, it has been aimed to discuss the current landscape of photothermal agents, elucidate the underlying mechanisms of mPTT, highlight the benefits of mPTT in combination therapy, and explore the potential of nanomedicines to enhance mPTT efficacy. Additionally, future directions for the development of mPTT are presented and the challenges that are needed to be addressed are identified, with the aim of encouraging further research contributions to advance mPTT toward clinical applications.

Biomedicial therapeutic potential of copper tannic acid coordination nanosheet with multiple catalytic properties

The utilization of nanomaterials in disease treatment has become a prominent area of research in the medical field. Nanocarrier materials endowed with catalytic and biological enzyme properties have exhibited promising prospects for applications in treating chronic inflammatory diseases, including cancer and diabetes. In this study, we have successfully synthesized a versatile CuTA nanosheets with a cost-effective approach, making it suitable for various pathological models. The CuTA nanosheets exhibit remarkable characteristics, including catalyzing the Fenton reaction for peroxide decomposition and accelerating the release of nitric oxide (NO) through the catalysis of endothelial nitric oxide synthase (eNOS), both of which are dependent on the concentration of the CuTA nanosheets. Furthermore, at a concentration of 2 mg/mL, the CuTA nanosheets achieved a removal rate of free radicals at 63.7%. When exposed to 808 nm near-infrared light, the temperature rose from 8 °C to 42 °C within 10 min. Additionally, at a concentration of 50 µg/mL, the inhibition rates of CuTA nanosheets on Escherichia coli and Staphylococcus aureus reached 98.3% and 96.1%, respectively. These unique characteristics make it highly suitable for effective applications in various fields, including biomedical, drug delivery, and photothermal therapy.

Biological Applications of Thermoplasmonics.

Thermoplasmonics has emerged as an extraordinarily versatile tool with profound applications across various biological domains ranging from medical science to cell biology and biophysics. The key feature of nanoscale plasmonic heating involves remote activation of heating by applying laser irradiation to plasmonic nanostructures that are designed to optimally convert light into heat. This unique capability paves the way for a diverse array of applications, facilitating the exploration of critical biological processes such as cell differentiation, repair, signaling, and protein functionality, and the advancement of biosensing techniques. Of particular significance is the rapid heat cycling that can be achieved through thermoplasmonics, which has ushered in remarkable technical innovations such as accelerated amplification of DNA through quantitative reverse transcription polymerase chain reaction. Finally, medical applications of photothermal therapy have recently completed clinical trials with remarkable results in prostate cancer, which will inevitably lead to the implementation of photothermal therapy for a number of diseases in the future. Within this review, we offer a survey of the latest advancements in the burgeoning field of thermoplasmonics, with a keen emphasis on its transformative applications within the realm of biosciences.