Application Of Lens Research Articles

Pengaruh Topografi terhadap Keanekaragaman Gulma dalam Budidaya Talas Beneng (Xanthosoma undipes)

Research on weed diversity in talas beneng cultivation areas at various altitudes in Banten is important for providing initial data for weed management. Weed diversity is influenced by internal factors, such as adaptation mechanisms and reproduction, as well as external factors, including environmental conditions, temperature, soil fertility, and altitude. This study was conducted from August to September 2024, observing weed diversity in lowland (343 m a.s.l., Desa Talaga Warna, Serang), midland (615 m a.s.l., Desa Cinyurup, Pandeglang), and highland (761 m a.s.l., Desa Kaduengang, Pandeglang) areas. Sampling involved three plots for each topography, using a purposive sampling method. Field observations were conducted using various weed identification tools, including the PictureThis and Google Lens applications. Data analysis focused on Absolute and Relative Density, Frequency, Dominance, Importance Value Index (IVI), Summed Dominance Ratio (SDR), and Diversity Index. Results indicated that Synedrella nodifora had the highest density in the lowlands, Ageratum conyzoides in the midlands, and Vandellia diffusa in the highlands. The Shannon Diversity Index (H') showed diversity levels of 0.88 (lowland), 1.89 (midland), and 2.68 (highland). These findings suggest that altitude influences weed diversity, with higher elevations supporting greater diversity due to climate and environmental variations. This study highlights the impact of topography on weed communities, providing insights for more targeted weed management in talas beneng cultivation.

A Review of Cascaded Metasurfaces for Advanced Integrated Devices

This paper reviews the field of cascaded metasurfaces, which are advanced optical devices formed by stacking or serially arranging multiple metasurface layers. These structures leverage near-field and far-field electromagnetic (EM) coupling mechanisms to enhance functionalities beyond single-layer metasurfaces. This review comprehensively discusses the physical principles, design methodologies, and applications of cascaded metasurfaces, focusing on both static and dynamic configurations. Near-field-coupled structures create new resonant modes through strong EM interactions, allowing for efficient control of light properties like phase, polarization, and wave propagation. Far-field coupling, achieved through greater interlayer spacing, enables traditional optical methods for design, expanding applications to aberration correction, spectrometers, and retroreflectors. Dynamic configurations include tunable devices that adjust their optical characteristics through mechanical motion, making them valuable for applications in beam steering, varifocal lenses, and holography. This paper concludes with insights into the potential of cascaded metasurfaces to create multifunctional, compact optical systems, setting the stage for future innovations in miniaturized and integrated optical devices.

Effects of dual plasticizers for improved PVC gel-based varifocal tiny lens

Abstract Electroactive polyvinyl chloride (PVC) gel-based varifocal lenses are attractive due to their excellent transparency, simple fabrication, compact structure, and good flexibility. In this work, dibutyl adipate (DBA) and propylene carbonate (PC) were utilized to plasticize PVC for fabricating transparent, soft, and flexible gels by solvent casting method. The PVC gels were characterized by various experimental techniques to investigate their optical, electrical, mechanical, and thermal properties. Further, the PVC gels were examined to construct a compact plano-convex tiny lens structure for varifocal lens application under electrical stimulation. The work revealed that the introduction of a co-plasticizer PC improves the overall dielectric property as well as transparency of the PVC gels. The observed enhancement in dielectric constant of the PC incorporated gels increased up to 6 times of the only DBA plasticized PVC gel (D9) while the transmittance value is ~5% higher than that of D9 gel. Moreover, the optimal ratio of DBA and PC in PVC gel was found to be 8.6: 0.4: 1 (wt %) and the optimized D8.6P0.4 gel induces better actuation properties resulting in improved focal length variation for the developed lens. The proposed adaptive tiny lens could change its focal length from 3 mm to 20.5 mm with increasing input voltage from 0 V to 1000 V. The developed tiny lens exhibited excellent optical characteristics including fast response speed and good stability. Moreover, this study broadens the scope for property tuning strategies for the EAP design and application.

The application of rigid gas permeable contact lenses after surgery for infantile nystagmus syndrome

The purpose of this study is to investigate the improvement in visual acuity when applying Rigid Gas Permeable Contact Lenses (RGPCL) compared to spectacles in patients after surgical treatment for infantile nystagmus syndrome (INS). A total of 33 patients with nystagmus who had nystagmus surgery from October 2020 to July 2021 were enrolled and all were fitted RGPCL. SPSS statistical software was used to analyze the difference between best-corrected visual acuity with spectacle(BCSVA) and best-corrected visual acuity with RGPCL (BCRVA) in these patients. According to the refractive status of each eye, it was grouped into 2 groups. We study the difference between its BCSVA and BCRVA in different groups. In our study, BCRVA was significantly better than BCSVA in all participants (P < 0.001), with a strong positive correlation between them (overall r = 0.9333). In Group A (SE ≥ -3.00D, 15 eyes), the difference was significant (P = 0.0018), while in Group B (SE < -3.00D, 27 eyes), the difference was highly significant (P < 0.001). However, there was no significant difference in corrective visual acuity between the two groups (P = 0.5934). The mean difference between BCRVA and BCSVA was − 0.1160 ± 0.1221 in all participants, with similar differences in both groups. These findings suggest that BCRVA and BCSVA are closely related but with significant differences. The results of our study show that for patients who have undergone surgery for INS, RGPCL provide better best-corrected visual acuity compared to spectacle correction. This holds true for patients with high myopia, low myopia, and hyperopia. We recommend the use of RGPCL for refractive correction in patients after surgery for INS.

New Design Scheme for and Application of Fresnel Lens for Broadband Photonics Terahertz Communication.

In terahertz communication systems, lens antennas used in transceivers are basically plano-convex dielectric lenses. The size of a plano-convex lens increases as the aperture increases, and thinner lenses have longer focal lengths. Through theory and simulation, we designed a Fresnel lens suitable for the terahertz band to meet the requirements of large aperture and short focal length, and simulated the performance, advantages, and disadvantages of the terahertz Fresnel lens. A 300 GHz terahertz wireless communication system was built to verify the gain effect of the Fresnel lens antenna. The experimental results demonstrate that the Fresnel lens can be used for long-distance terahertz communication with larger aperture diameters, overcoming the limitations of traditional plano-convex lenses. The theoretical gain of a 30 cm Fresnel lens is 48.83 dB, while the actual measured gain is approximately 45 dB.

Exploring Asymmetric Lens–Total Internal Reflection (AL–TIR) Optics for Uniform Ceiling Illumination in Interior Lighting

This study presents a significant advancement in LED interior lighting through the development and application of Asymmetric Lens–Total Internal Reflection (AL–TIR) optics, with a focus on enhancing lighting uniformity and indoor comfort by simulating sky-like lighting distribution. AL–TIR technology employs asymmetric lenses combined with total internal reflection to efficiently redirect and spread light, achieving a controlled and even ceiling illumination suitable for various interior applications. This research explored the establishment of ideal luminous intensity curves, devised practical AL–TIR optical designs through numerical calculations, and conducted extensive simulations to assess performance in typical indoor environments. Our findings demonstrated substantial improvements in lighting uniformity, with the AL and AL–TIR systems achieving direct illuminance uniformities of 0.78 and 0.83, respectively, compared to traditional tube LEDs at 0.25. These results, validated in several office rooms, highlight the efficacy of AL–TIR optics in revolutionizing indoor lighting design by balancing optimal lighting distribution with occupant comfort and well-being.

Facile fabrication of hemicrystalline bio-based polycarbonate with superhydrophobic and high transmittance

Developing materials that combine superhydrophobic properties with high optical transmittance poses a significant challenge. In this study, hydroxyl-terminated polydimethylsiloxane (HT-PDMS) and isosorbide (ISB) were polymerized in a single step to create a covalently bonded optical polycarbonate material. By inducing the formation of micro-papillary and lotus-shaped nanoscale structures via a solvent-triggered process, we significantly enhanced the “air cushion” effect, achieving a structure scale of approximately 5–7 μm. This resulted in a water contact angle of 157° while maintaining over 90 % optical transmittance. The structures were uniformly distributed throughout the polymer matrix, leading to a 500 % increase in tensile strength at break compared to pure isosorbide polycarbonate, with a maximum strength exceeding 50 MPa. These multifunctional materials show great promise for applications in smart windows, solar panels, camera lenses, and other optoelectronic devices.

Vat photopolymerization of multifunctional fresnel lenses for ocular management.

In this study, multifunctional Fresnel lenses were explored as a potential solution for correcting vision in patients with color vision deficiency (CVD) and high myopia. Current studies have primarily focused on color vision correction through the 3D printing of glasses and contact lenses. However, the potential of 3D-printed multifunctional devices, such as Fresnel lenses, goes beyond addressing a single vision correction issue. For this study, computer-aided design (CAD) model of Fresnel lens with high diopter based on constant height configuration was developed. The CAD model was successfully fabricated using vat photopolymerization 3D printer, employing laboratory-prepared transparent HEMA resin. The resin was modified with two Atto dyes (565nm and 488nm), known for their ability to filter out problematic wavelengths (400-500nm and 540-580nm) to address color vision deficiency. The printed lenses were characterized by their chemical, physical, and optical properties using various characterization techniques. The focusing performance was evaluated using focal length measurements, and the results obtained were less than 2mm deviation from the design value, having the potential to assist in higher myopic vision correction. The resulting optical spectra were compared with commercial glasses, revealing close agreement for CVD correction. These results expand the potential applications of multifunctional Fresnel lenses in ophthalmology, demonstrating their effectiveness as vision-correcting lenses and imaging systems.

Differences in the Use and Perception of Telehealth Across Four Mental Health Professions: Insights From a Secondary Analysis of Qualitative Data.

There is growing evidence that the uptake and use of telehealth is influenced by the distinct specialty area or type of healthcare service provided, with mental health services presenting particular challenges. However, little is known about how telehealth use differs between different mental health professions, and no qualitative research has explored variations in telehealth use and perspectives at the profession level within Australian mental health services. To address this gap, we analyzed transcripts from 19 semi-structured interviews conducted with mental healthcare professionals in a local health district within New South Wales, Australia. A secondary analysis of the data revealed the distinct ways in which different mental health professions perceive and engage with telehealth depending on their specific role and approach to practice. Application of a systems theory lens highlighted the challenges each profession faces at different levels of telehealth engagement, and the macro-systemic power dynamics and hierarchies that shape profession-specific differences in telehealth use.

NOVEL SMART CONTACT LENSES WITH EMBEDDED AI FOR PIONEERING CONTINUOUS HEALTH TRACKING AND DISEASE DETECTION

Smart contact lenses equipped with embedded artificial intelligence (AI) represent a groundbreaking advancement in continuous health monitoring and disease detection. This paper explores the development and application of smart contact lenses that integrate real-time data collection with sophisticated AI algorithms to monitor various health parameters. By incorporating sensors and AI processing units directly into the lenses, these devices can continuously measure and analyze biometric data such as glucose levels, intraocular pressure, and ocular health indicators. The embedded AI system processes this data to provide real-time feedback, identify potential health issues, and predict disease onset with high accuracy. The study evaluates the efficacy of these smart contact lenses in detecting early signs of chronic conditions like diabetes and glaucoma, and their ability to enhance patient engagement through personalized health insights. Additionally, the paper discusses the technological challenges, including data accuracy, device comfort, and privacy concerns, and proposes solutions to address these issues. The integration of smart contact lenses with AI technology offers a novel approach to proactive health management, paving the way for more accessible and effective continuous monitoring and early disease detection.

Highly transparent inorganic superhydrophilic coatings with sustainable anti-fogging and mechanically robust underwater anti-oil-fouling capabilities

Inorganic coatings with high transparency and superhydrophilicity have attracted tremendous attention because of their potential applications in marine environment monitoring, and oily wastewater treatment. However, the transparency and superhydrophilicity are usually mutually exclusive. Herein, we present a new facile strategy for fabricating highly transparent and mechanically robust superhydrophilic inorganic coatings with outstanding anti-fogging ability and anti-oil-fouling performance for high-viscosity oils. In this strategy, amorphous calcium phosphate (ACP) coatings are mineralized on the surface of polydopamine and polyethylenimine (PDA/PEI) membranes under the synergistic effect of magnesium ions, citric acid, and poly(acrylic acid) at room temperature, forming an organic-inorganic composite structure with a uniform texture on various substrates. Owing to the strong hydration capacity of ACP, these coatings are highly efficient at preventing surface fogging and avoiding underwater crude oil fouling. Meanwhile, the ACP coating without grain boundaries or pores can reduce light scattering, thus maintaining the high transparency of the substrate. Moreover, the organic-inorganic composite structure endows the coatings with robust mechanical properties. This PDA/PEI-ACP mineralized coating can be deposited on various substrates, showing potential applications in underwater optical lenses, oily wastewater treatment, microfluidic devices, and other areas.

Machine learning and design of experiments for optimizing laser-engraved micro fresnel lens mould

This research examines the application of Laser Engraving to produce micro Fresnel Lenses on aluminum plates, a novel application of this non-conventional machining method. The research explores the effects of the scan speed, laser power with number of cycles on the roundness deviation using a L9 orthogonal array. Multiple analytical methods, including the Taguchi method, Random Forest Algorithm with sensitivity analysis, are employed to optimize process and predict the outcomes. In this study, a thorough analysis of the fabrication of a micro Fresnel lens on Aluminum plate (10 mm × 10 mm × 2 mm) using fiber laser of wavelength 1064 nm is presented. The study finds that laser power has most significant effect on the roundness deviation, followed by the number of the cycles and scan speed. Scan Speed ranges from 500 to 700 mm s−1, the Power ranges from 25 to 35 Watts, and the Number of Cycles ranges from 100 to 200. Optimal conditions are identified as 700 mm/s scan speed, 25 W power, and 100 cycles. Microscopic analysis confirms roundness deviation under these conditions. Comparisons between analytical approaches and experimental results reveal that both the Taguchi method and Random Forest Algorithm align closely with experimental outcomes, with the Random Forest Algorithm showing slightly higher accuracy (6.18 percentage points closer to experimental results). This research addresses a gap in comparative studies evaluating traditional statistical methods against modern machine learning algorithms for process optimization in laser machining. It combines knowledge from optics, materials science, and laser machining, utilizing advanced methods and technologies that have only recently become accessible. The findings provide valuable insights for future applications of micro Fresnel lenses on aluminum plates and contribute to the understanding of laser engraving processes for precision optical components. Between the Random Forest Algorithm and the Taguchi method, Random Forest Algorithm fits more closely to the experimental result. Random Forest Algorithm prediction is closer to experimental result by about 6.18 percentage points compared to the Taguchi method prediction.

Family-focused practice and policy recommendations to improve the inpatient experience for patients undergoing a stem cell transplant.

Hematopoietic stem cell transplantation (HCT) greatly impacts the social, emotional, and physical well-being of the patient and their family. The transplant process imposes significant lifestyle restrictions that result in patient and family isolation, which has been further amplified during the COVID-19 pandemic era. While hospital systems recognize the importance of family engagement, the pandemic underscored the need to translate this philosophy more fully into practice. We discuss the importance of engaging the family throughout the transplant experience to improve patient outcomes and overall family health and well-being. We present the HCT family resilience model, a synthesis of multiple family and nursing theories and HCT concepts to better guide HCT family care. The theories and frameworks that inform our model address family functioning and growth in times of stress, coping strategies that promote positive family outcomes and resilience, and multicultural factors that may affect family experiences. A key contribution of our model is highlighting the role of family engagement in improving HCT family outcomes. Application of a family systems lens highlights the essential role families play in the care of HCT patients and can foster family well-being. We offer the HCT family resilience conceptual model as a guide for practice and policy improvements to optimize care delivery for this patient and family population, as well as direction for future research. (PsycInfo Database Record (c) 2024 APA, all rights reserved).

Clinical Outcomes of Enhanced Monofocal (Mono-EDOF) Intraocular Lenses with the Mini-Monovision Technique versus Trifocal Intraocular Lenses: A Comparative Study

It was aimed to compare the clinical results of the mini-monovision technique (MMV) with enhanced monofocal intraocular lens (IOL) and trifocal IOL applications and to evaluate the intereye differences in the MMV group. This retrospective observational study evaluated the results of cataract surgeries performed on 48 eyes of 24 patients. Surgeries in Group I were performed for MMV using the RayOne EMV IOL targeting emmetropia in dominant eyes (Group IA) and -0.70 diopter (D) myopia in non-dominant eyes (Group IB), while those in Group II were performed with the AcrySof® IQ PanOptixTM TNFT00 IOL targeting emmetropia. After the surgeries, uncorrected and corrected distance, intermediate, and near distance visual acuities, contrast sensitivity measurements, and defocus curves were determined. Subjective evaluation was made with the National Eye Institute Visual Function Questionnaire (NEI VFQ-25). The groups were compared statistically. Postoperative refraction mean spherical equivalent was -0.25±0.22 D, -0.67±0.33 D, and -0.16±0.31 D in the three groups, respectively. A statistical difference was identified in favor of Group IA for uncorrected distance vision and in favor of Group IB for near vision (p<0.05). There was no difference in bilateral uncorrected visions in Groups I and II (p>0.05). While contrast sensitivity was better in Group I at all spatial frequencies (p<0.05), better vision was achieved in the defocus curve at distance in Group IA and at near in Group IB. In the binocular evaluation, it was seen that Groups I and II had similar results. In the subjective evaluation, NEI-VFQ-25 scores were 94.1±4.2/100 in Group I and 91.5±3.0/100 in Group II at 6 months (p>0.05). Photic complaints were significantly more common in Group II. With the MMV technique, it was observed that enhanced monofocal lenses provided better visual acuity at all distances and less dysphotopsia than trifocal lenses, whereas trifocal lenses were better at providing independence from glasses.

Photo‐Active Soft Actuator Enabling Dynamic Manipulable Lenses with Surface Reshaping

AbstractManipulable lenses with tunable focal length have garnered great attention due to their unique advantages including strong adjustability, low power consumption, fast response times, and ease of integration. However, in the context of advancing intellectualization, weight reduction, and miniaturization of imaging systems, mere focal length adjustment is no longer sufficient. Herein, an innovative method is introduced for creating a dynamic light manipulable (DLM) lens with surface reshaping. This breakthrough is accomplished through the collaborative integration of a medium lens with an actuator based on photo‐active liquid crystal polymer (LCP) film, where the deformation of the photo‐active LCP film can be arbitrarily controlled by meticulously designing the orientation distributions of liquid crystal (LC) mesogens within the film. The lens with three distinct surfaces, including quasi‐cone, paraboloid, and 3 × 3 paraboloid array, are demonstrated with infrared stability, robust fatigue resistance, long natural recovery time, outstanding thermal stability, and excellent solvent resistance, further confirming the feasibility of the lens application in tunable display, imaging, infrared optics, and other systems. This work holds the promise of paving the way for a new generation of imaging systems.

Strategic flood risk management over time. Applying a temporal lens to see how flood risk management measures are (or are not) implemented

ABSTRACT Strategic flood risk management of river catchments involves significant increases in the complexity both of the contents (e.g. the aims and measures) of a given strategy and also its social, spatial, and temporal scales. Conceptually, flood risk management research to date has underestimated the importance of time and temporality. This paper, which is based on ‘historical Institutionalism,’ introduces a temporal lens to focus on strategic flood risk management; it highlights issues of duration and timing as well as tempo and change in tempo with respect to the implementation of measures to reduce flood risk at catchment level. The application of a temporal lens is illustrated through empirical research into strategic flood risk management for the medium-sized Aist river catchment in Austria. The paper uses a longitudinal qualitative research design to analyze the changes in strategic flood risk management in the catchment. The analysis shows that strategy efforts in reaction to an extreme flood event in the catchment in August 2002 can be differentiated into three phases. Phase 1 is characterized by the design of ambitious catchment-wide management; Phase 2 by struggles to implement the strategy due to institutional conditions and protests by citizens; and Phase 3 by redesign of the initial strategic plan to make it less ambitious and by changes to the actor constellation supporting the plan. The present paper offers a process-oriented institutional explanation for this pattern of phases, and it highlights issues of timing and tempo. It concludes with general suggestions for enhancing the temporal dimension in flood risk management.

Design of wavefront detection system for eyeglasses based on transmissive phase measuring deflectometry using gamma error correction algorithm

With the increasingly widespread application of freeform lenses, the detection of lens dioptric power presents a challenge. To measure the surface dioptric power of freeform lenses, a wavefront detection system for eyeglass lenses based on transmissive phase measuring deflectometry has been developed. The system consists only of a monitor, an industrial camera, and the lens under test. In response to the phase errors introduced by nonlinear devices, a Frequency Domain Gamma Error Correction Algorithm based on Linear Regression (FDLR) is proposed to optimize the system detection process and enhance detection accuracy. In the experiments, the proposed system was used to measure the wavefront and surface dioptric power of both spherical lens and progressive addition lens. The results were compared with those obtained from a focimeter to verify the accuracy and reliability of the system. Furthermore, a comparison of the detection results for progressive addition lens before and after phase error correction was conducted to demonstrate the necessity and effectiveness of the proposed phase error correction algorithm.

Smart Contact Lenses in Ophthalmology: Innovations, Applications, and Future Prospects.

Smart contact lenses represent a breakthrough in the intersection of medical science and innovative technology, offering transformative potential in ophthalmology. This review article delves into the technological underpinnings of smart contact lenses, emphasizing the current landscape and advancements in biosensors, power supply, biomaterials, and the transmission of ocular information. This review further applies new innovations to their emerging role in the diagnosis, monitoring, and management of various ocular conditions. Moreover, we explore the impact of technical innovations on the application of smart contact lenses in monitoring glaucoma, managing postoperative care, and dry eye syndrome, further elucidating the non-invasive nature of these devices in continuous ocular health monitoring. The therapeutic potential of smart contact lenses such as treatment through targeted drug delivery and the monitoring of inflammatory biomarkers is also highlighted. Despite promising advancements, the implementation of smart contact lenses faces technical, regulatory, and patient compliance challenges. This review synthesizes the recent advances to provide an outlook on the state of smart contact lens technology. Furthermore, we discuss future directions, focusing on potential technological enhancements and new applications within ophthalmology.

비수계 저온 방식을 사용한 세륨 나노입자의 합성 및 고기능성 콘택트렌즈로의 응용

비수계 저온 방식을 사용한 세륨 나노입자의 합성 및 고기능성 콘택트렌즈로의 응용

Toward the Next Generation Human-Machine Interaction: Headworn Wearable Devices.

Wearable devices are lightweight and portable devices worn directly on the body or integrated into the user's clothing or accessories. They are usually connected to the Internet and combined with various software applications to monitor the user's physical conditions. The latest research shows that wearable head devices, particularly those incorporating microfluidic technology, enable the monitoring of bodily fluids and physiological states. Here, we summarize the main forms, functions, and applications of head wearable devices through innovative researches in recent years. The main functions of wearable head devices are sensor monitoring, diagnosis, and even therapeutic interventions. Through this application, real-time monitoring of human physiological conditions and noninvasive treatment can be realized. Furthermore, microfluidics can realize real-time monitoring of body fluids and skin interstitial fluid, which is highly significant in medical diagnosis and has broad medical application prospects. However, despite the progress made, significant challenges persist in the integration of microfluidics into wearable devices at the current technological level. Herein, we focus on summarizing the cutting-edge applications of microfluidic contact lenses and offer insights into the burgeoning intersection between microfluidics and head-worn wearables, providing a glimpse into their future prospects.