Application In Wastewater Treatment Research Articles

Efficient photocatalytic degradation of textile dye pollutants using thermally exfoliated graphitic carbon nitride (TE–g–C3N4)

Graphitic carbon nitride (g–C3N4), an organic photocatalyst was reported to have beneficial properties to be used in wastewater treatment applications. However, g–C3N4, in its bulk form was found to have poor photocatalytic degradation efficiency due to its inherent limitations such as poor specific surface area and fast electron–hole pair recombination rate. In this study, we have tuned the physiochemical properties of bulk g–C3N4 by direct thermal exfoliation (TE–g–C3N4) and examined their photocatalytic degradation efficiency against abundant textile dyes such as methylene blue (MB), methyl orange (MO), and rhodamine B (RhB). The degradation efficiencies for MB, MO, and RhB dyes are 92 ± 0.18%, 93 ± 0.31%, and 95 ± 0.4% respectively in 60 min of UV light irradiation. The degradation efficiency increased with an increase in the exfoliation temperature. The prepared catalysts were characterized using FTIR, XRD, FE-SEM, EDAX, BET, and UV-DRS. In BET analysis, TE–g–C3N4 samples showed improved surface area (48.20 m2/g) when compared to the bulk g–C3N4 (5.03 m2/g). Further, the TE–g–C3N4 had 2.98 times higher adsorption efficiency than the bulk ones. The free radicals scavenging studies revealed that the superoxide radicals played an important role in the photodegradation for dyes, when compared to the hydroxyl radical (.OH) and the photo-induced holes (h+), Photoluminescence (PL) emission and electrochemical impedance spectroscopy (EIS) spectra of TE–g–C3N4 indicated a lowered electron–hole pairs’ recombination rate and an increased photo-induced charge transfer respectively. Further, the TE–g–C3N4 were found to have excellent stability for up to 5 cycles with only a minor decrease in the activity from 92% to 86.2%. These findings proved that TE–g–C3N4 was an excellent photocatalyst for the removal and degradation of textile dyes from wastewater.

Mesoporous Magnetic/Polymer Hybrid Nanoabsorbent for Rapid and Efficient Removal of Heavy Metal Ions from Wastewater.

As an advanced water purification technology, magnetic nanoabsorbents are highly attractive for their sustainability, robustness, and energy efficiency. However, magnetic responsiveness and high adsorptive capacity are irreconcilable during the design and synthesis of a high-performance magnetic nanoabsorbent. Here, we address this issue by designing a kind of mesoporous magnetic polymer hybrid microspheres, where functional polymers such as polyrhodanine and polypyrrole were attached to the pore walls in the interior of mesoporous Fe3O4 microspheres through in situ polymerization. Due to the integrated large saturation magnetic moment, porous structure, and dense polymer layer, the mesoporous magnetic polymer hybrid microspheres demonstrated fast magnetic responsiveness, excellent recycling performance, and high adsorption capacities toward Pb(II) ions (189 mg g-1) for polyrhodanine and Cr(VI) ions (199 mg g-1) for polypyrrole. Furthermore, their potential application in wastewater treatment was verified by a self-made magnetic separation column, where the designed magnetic nanoabsorbent exhibits significant advantages including rapid separation of heavy metal ions and high outflow. This study provided a promising magnetic polymer hybrid nanoabsorbent for realizing efficient removal of heavy metal ions from wastewater.

Biopolymeric Nanocomposites for Wastewater Remediation: An Overview on Recent Progress and Challenges.

Essential for human development, water is increasingly polluted by diverse anthropogenic activities, containing contaminants like organic dyes, acids, antibiotics, inorganic salts, and heavy metals. Conventional methods fall short, prompting the exploration of advanced, cost-effective remediation. Recent research focuses on sustainable adsorption, with nano-modifications enhancing adsorbent efficacy against persistent waterborne pollutants. This review delves into recent advancements (2020-2023) in sustainable biopolymeric nanocomposites, spotlighting the applications of biopolymers like chitosan in wastewater remediation, particularly as adsorbents and filtration membranes along with their mechanism. The advantages and drawbacks of various biopolymers have also been discussed along with their modification in synthesizing biopolymeric nanocomposites by combining the benefits of biodegradable polymers and nanomaterials for enhanced physiochemical and mechanical properties for their application in wastewater treatment. The important functions of biopolymeric nanocomposites by adsorbing, removing, and selectively targeting contaminants, contributing to the purification and sustainable management of water resources, have also been elaborated on. Furthermore, it outlines the reusability and current challenges for the further exploration of biopolymers in this burgeoning field for environmental applications.

Phenol degradation and Sb(V) adsorption by superparamagnetic CTAB-modified iron calcium composite

The heavy metal ions and organic dyes in textile wastewater treatment pose a significant environmental burden and are challenging to effectively manage. A magnetic cationic surfactant hexadecyltrimethylammonium bromide (CTAB), modified iron-calcium composite (referred to as CIC), was prepared using a straightforward method from iron-calcium composites as raw materials. The simultaneous catalytic degradation and adsorption efficiency of phenol and Sb(V) from textile wastewater were evaluated using this material. The results indicate that under conditions of pH 5.0 and a duration of 180 min, both phenol and Sb(V) removal rates exceed 90%. Characterization and experimental findings reveal that CIC possesses magnetic properties, facilitating easy separation, and offers a large surface area, ensuring abundant adsorption sites and stability. Additionally, CIC can assist in the enhanced degradation of phenol by H2O2. Pseudo-second-order kinetics describe the adsorption of Sb(V) by CIC, while oxidative kinetics explain the degradation of phenol. The primary removal mechanisms involve the oxidation and degradation of phenol through the generation of hydroxyl radicals by H2O2 and the formation of Fe-O-Sb complexes between Sb(V) and the iron sites on CIC, as well as the precipitation of Ca-O-Sb compounds between Sb(V) and the calcium sites on CIC. Therefore, the synergistic effect of CIC and H2O2 offers an efficient and environmentally friendly method for the simultaneous removal of Sb(V) and phenol in coupled wastewater, presenting broad prospects for application in wastewater treatment.

Surface Aerophilicity Engineering of Heterogeneous Catalysts for Enhanced Catalytic Ozonation

AbstractHeterogeneous catalysts for catalytic ozonation are elaborately designed with commendable intrinsic activity, while their industrial applications are limited by inadequate mass transfer of ozone (O3). In this work, it is demonstrated that engineering the surface aerophilicity of heterogeneous catalyst enables fast mass transfer of O3 reactant, giving rise to much enhanced catalytic ozonation performance. Taking active 4A zeolite catalyst as an example, the aerophilicity of spherical 4A zeolite can be greatly enhanced by coating polytetrafluoroethylene (PTFE) with low surface energy, and the optimized sample exhibits a 99.5% removal of atrazine (ATZ) within 20 min (corresponding to a k of 0.269 min−1), much better than 4A zeolite without surface aerophilicity engineering (k≈0.156 min−1). The PTFE coating does not change the ozone activation mechanism and degradation pathways for ATZ, further demonstrating that the enhanced ozonation activity is attributed to the enhanced mass transfer process. In addition, the general applicability of this surface aerophilicity and the potential ozonation application for industrial wastewater treatment are both demonstrated.

Iodide ion-imprinted chitosan beads for highly selective adsorption for nuclear wastewater treatment applications

Iodide ions from radioactive iodine isotopes are common contaminants present in nuclear wastewater from nuclear power plants which are considered hazardous contaminants to be released in water sources even at low concentrations due to their association with metabolic disorders, therefore its removal from the nuclear wastewater effluents is necessary. Chitosan beads are natural and cost-efficient adsorbents that have been used for ion removal from wastewater. However, issues of poor selectivity persist in achieving high-efficiency iodide ion removal. In this study, ion-imprinted chitosan beads (IIC) have been synthesized using the phase-inversion method, IIC beads were modified by cross-linking with epichlorohydrin (IIC-EPI) and modified by cross-linking with epichlorohydrin and silicon dioxide nanoparticles (IIC–SiO2-EPI). Through 4 h of batch adsorption experiments, IIC beads achieved a maximum adsorption capacity (Qe) of 0.65 mmol g−1 and showed more preference for the iodide ions compared to the non-imprinted chitosan beads which achieved a maximum adsorption capacity of 0.27 mmol g−1 at pH 7. While the modified beads IIC-EPI and IIC-SiO2-EPI beads have boosted the adsorption capacities to 0.72 mmol g−1 and 0.91 mmol g−1. Scanning electron microscopic cross-sectional images have shown more pores and cavities than the surface images which agrees with the multilayer heterogeneous diffusion suggested by the Freundlich adsorption isotherm, that the experimental data has fitted. Adsorption kinetic data have fitted the Pseudo-second-order model as well as the Weber and Morris intraparticle model, which suggest an intraparticle pore diffusion adsorption mechanism, with the involvement of the physical electrostatic interactions with the cationic chitosan surface.

Temperature and photosensitive PVDF-g-PNIPAAm/GPE-PDA@ZnO composite membranes with efficient dyes separation capability and light-cleaning function

In this paper, PVDF-g-PNIPAAm/GEP-PDA@ZnO composite membranes that can undergo light-induced structural response and photodegradation to achieve self-cleaning have been designed and applied to the separation and purification of dye wastewater. The membranes were prepared by blending graphene (GPE)-polydopamine (PDA)-coated zinc oxide (ZnO) core–shell particles into the PVDF-g-PNIPAAm matrix with a non-solvent induced phase separation technique. The GPE and ZnO are tightly bonded by highly adhesive PDA to form a “strawberry-like” core–shell structure. GPE absorbs light energy and converts it into heat, resulting in changes in PNIPAAm chain segments to expand the pore size for self-cleaning. While the membrane is warming up, GPE further promotes the activation of active groups on the surface of PDA@ZnO at high temperature, resulting in unique and excellent photothermal catalytic activity. As a result, the membrane achieves both self-cleaning and pollutant degradation, which results in an FRR of 99.6% after light cleaning. Moreover, the GPE-PDA@ZnO nanoparticle-modified PVDF-g-PNIPAAm membranes exhibit excellent cycling stability with a degradation flux recovery rate of more than 97% even after multiple UV cleaning. Thus, PVDF-g-PNIPAAm/GPE-PDA@ZnO composite membranes extend the versatility of PVDF-based membranes and show extraordinary potential for application in wastewater treatment.

Characteristics of annular surface dielectric barrier discharge with microsecond pulse under water-covered condition.

Surface dielectric barrier discharge (SDBD) has wide applications in flow control, wastewater treatment, and biomedicine. The dielectric surface of an SDBD actuator is generally attached to the water droplets during applications. Thus far, only a few studies have been conducted on the effects of water covering the dielectric surface on the discharge characteristics of SDBD. Therefore, the effects of water droplets on the discharge of an SDBD actuator based on a repetitive microsecond pulse power supply were investigated in this study. The results show that a filament micro-discharge channel forms between the light and dark regions at the internal edge of the SDBD high-voltage electrode and develops toward the center of the dielectric surface in the region without water droplet coverage. SDBD in the water-covered region was divided into two stages. This paper compares the electrical characteristics of SDBD with and without water droplet, and explores the electric field distortion effect of water droplet endpoints through 3D simulation.Based on the theories of water droplet polarization and gas discharge, the effects of water droplets on plasma development and surface charge accumulation under water-covered condition were analyzed. The water droplet plays a similar role as a "secondary electrode" during the discharge process.

Embedding electronic perpetual motion into single-atom catalysts for persistent Fenton-like reactions

In our quest to leverage the capabilities of the emerging single-atom catalysts (SACs) for wastewater purification, we confronted fundamental challenges related to electron scarcity and instability. Through meticulous theoretical calculations, we identified optimal placements for nitrogen vacancies (Nv) and iron (Fe) single-atom sites, uncovering a dual-site approach that significantly amplified visible-light absorption and charge transfer dynamics. Informed by these computational insights, we cleverly integrated Nv into the catalyst design to boost electron density around iron atoms, yielding a potent and flexible photoactivator for benign peracetic acid. This exceptional catalyst exhibited remarkable stability and effectively degraded various organic contaminants over 20 cycles with self-cleaning properties. Specifically, the Nv sites captured electrons, enabling their swift transfer to adjacent Fe sites under visible light irradiation. This mechanism accelerated the reduction of the formed "peracetic acid-catalyst" intermediate. Theoretical calculations were used to elucidate the synergistic interplay of dual mechanisms, illuminating increased adsorption and activation of reactive molecules. Furthermore, electron reduction pathways on the conduction band were elaborately explored, unveiling the production of reactive species that enhanced photocatalytic processes. A six-flux model and associated parameters were also applied to precisely optimize the photocatalytic process, providing invaluable insights for future photocatalyst design. Overall, this study offers a molecule-level insight into the rational design of robust SACs in a photo-Fenton-like system, with promising implications for wastewater treatment and other high-value applications.

Comprehensive Investigation of Cu2+ Adsorption from Wastewater Using Olive-Waste-Derived Adsorbents: Experimental and Molecular Insights.

This study investigates the efficacy of adsorbents from locally sourced olive waste-encompassing olive skins, leaves, and pits, recovered from the initial centrifugation of olives (OWP)-and a composite with sodium alginate (OWPSA) for the removal of Cu2+ ions from synthetic wastewater. Experimental analyses conducted at room temperature, with an initial Cu2+ concentration of 50 mg/L and a solid/liquid ratio of 1 g/L, showed that the removal efficiencies were approximately 79.54% and 94.54% for OWP and OWPSA, respectively, highlighting the positive impact of alginate on adsorption capacity. Utilizing statistical physics isotherm models, particularly the single-layer model coupled to real gas (SLMRG), allowed us to robustly fit the experimental data, providing insights into the adsorption mechanisms. Thermodynamic parameters affirmed the spontaneity and endothermic nature of the processes. Adsorption kinetics were interpreted effectively using the pseudo-second-order (PSO) model. Molecular modeling investigations, including the conductor-like screening model for real solvents (COSMO-RS), density functional theory (DFT), and atom-in-molecule (AIM) analysis, unveiled intricate molecular interactions among the adsorbent components-cellulose, hemicellulose, lignin, and alginate-and the pollutant Cu2+, confirming their physically interactive nature. These findings emphasize the synergistic application of experimental and theoretical approaches, providing a comprehensive understanding of copper adsorption dynamics at the molecular level. This methodology holds promise for unraveling intricate processes across various adsorbent materials in wastewater treatment applications.

Enhanced heterogeneous electro-Fenton process for degradation of rhodamine B: FeOCl/CF@AB composite cathode with superior efficiency and sustainability

With the growing environmental concerns and increasing demand for clean energy, the synthesis of Stable and efficient heterogeneous Electro-Fenton catalysts gains significant attention in the market. We present a novel FeOCl/CF@AB composite cathode designed for efficient heterogeneous electro-Fenton degradation of rhodamine B. The composite cathode exhibits remarkable catalytic performance, outperforming the raw carbon felt electrode, and achieving significantly higher rhodamine B degradation rates. The incorporation of acetylene black encapsulation provides excellent stability, preserving the FeOCl active sites from corrosion and ensuring sustained catalytic activity even after multiple reuse cycles. The electron penetration mechanism on the FeOCl/CF@AB cathode is elucidated through density functional theory calculations, revealing spontaneous O2 activation and H2O2 generation. Electron transfer between Fe(II) species and the acetylene black shell facilitates these processes. The presence of •OH species supports the degradation of rhodamine B to intermediates and mineralization to CO2 and H2O. Furthermore, LC-MS analysis unveils the detoxification effect of the electro-Fenton process with FeOCl/CF@AB, presenting reduced developmental toxicity of degradation intermediates. Economic cost analysis demonstrates the feasibility and cost-effectiveness of the FeOCl/CF@AB cathode for large-scale wastewater treatment applications. In conclusion, the FeOCl/CF@AB composite cathode showcases stability and efficiency, offering a promising and sustainable electro-Fenton technology for dye wastewater treatment.

Green Fabrication of ZnO Nanoparticles and ZnO/rGO Nanocomposites from Algerian Date Syrup Extract: Synthesis, Characterization, and Augmented Photocatalytic Efficiency in Methylene Blue Degradation

This innovative article provides a detailed description of the successful biosynthesis of zinc nanoparticles (ZnO-NPs) using an aqueous extract of Algerian Date Syrup, also known as molasses. A meticulous process was carried out to determine the optimal calcination temperature for ZnO-NPs, a crucial step in the preparation of these nanoparticles. The study was further extended by creating ZnO/rGOx nanocomposites through a hydrothermal method, varying the concentrations of reduced graphene oxide (rGO) at 5%, 10%, and 15%. The characteristics of the nanocomposites were thoroughly explored, encompassing chemical, optical, and morphological aspects, using sophisticated analysis techniques such as scanning electron microscopy (SEM), UV-visible diffuse reflectance spectroscopy (UV DRS), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). These analyses provided an in-depth understanding of the structure and properties of the nanocomposites. The centerpiece of this study is the evaluation of the photocatalytic degradation capacity of ZnO-NPs and ZnO/rGOx nanocomposites. These materials have demonstrated their ability to act as cost-effective and environmentally friendly photocatalysts for wastewater treatment. Experiments on methylene blue degradation under UV irradiation were conducted, yielding impressive results: a degradation efficiency of 86.6% was achieved in 140 min using 1 g/L of ZnO-NPs, and this rate reached 100% with the ZnO/rGO catalyst in the same time frame, highlighting its superiority as a photocatalyst. Furthermore, this study examined the variables affecting the photocatalysis experiment, including the solution’s pH and the amount of catalyst. The results revealed that the ZnO/rGO photocatalyst reached its optimal efficiency under neutral pH conditions and at a concentration of 1 g/L, providing crucial information for practical use of these materials. This enriched article highlights the promising potential of ZnO-NPs and ZnO/rGOx nanocomposites as efficient photocatalysts for methylene blue degradation, paving the way for significant environmental applications in wastewater treatment.

Recent progress in two-dimensional materials for generation of hydrogen peroxide by two-electron oxygen reduction reaction

Hydrogen peroxide (H2O2) is an important green oxidant with a wide range of applications in wastewater treatment, pulp bleaching and chemical synthesis. In recent years, two-electron oxygen reduction reaction (2e-ORR) is expected to be a greener and safer alternative to the more energy-intensive and also carcinogenic anthraquinone process. Among the various electrocatalysts for 2e-ORR, two-dimensional nanomaterials have special advantages in the electrosynthesis of H2O2 due to their large specific surface area, abundant basal and edge sites, and tunable atomic structure. This review article summarizes the synthesis methods, and the strategies and mechanisms for enhancing 2e-ORR properties of 2D materials. Practical problems and serious challenges faced by 2D nanomaterials in the synthesis and 2e-ORR applications are elaborated. The aim of this review is to provide researchers with an understanding of 2D nanomaterials in electrocatalytic applications and to promote the further development of novel 2D nanoelectrocatalytic materials.

Enhanced charge carriers separation/transportation via S-scheme ZnCeS–ZnWO heterostructure nanocomposite for photodegradation of synthetic dyes under sunlight

Domestic wastage and liquid discharge from industries cause serious water pollution and severely damage the life cycle of living species. Therefore, it is necessary to construct efficient photocatalysts for the removal of toxic pollutants from water. Herein, a novel heterostructure ZnWO–ZnCeS nanocomposite was prepared by the sol-gel route and studied its physical and photocatalytic properties using various analytical techniques. Under sunlight irradiation, the ZnWO–ZnCeS photocatalyst eliminated 99.7, 99.1, 99.0 % rhodamine-B (RhB), methylene blue (MB), and safranin-O (SO) dyes within 70 min with excellent performance higher than individual ZnWO and ZnCeS catalysts. The optimization tests exhibit the catalyst loading = 30 mg, dye content = 25 ppm, solution pH = 8 of ZnWO–ZnCeS against MB dye for practical application. The heterojunction of coupled ZnWO and ZnCeS leads to a synergistic effect that facilitates the charge transport and hampers the recombination of photo-induced charge carriers thereby leading to boosted photocatalytic performance. Furthermore, based on the scavenging test, the hydroxyl and superoxide radicals were the reactive species during the photodegradation reaction. The designed photodegradation reaction mechanism has proposed the formation of an S-scheme in ZnWO–ZnCeS that led to the accumulation of electrons at ZnCeS and holes at ZnWO, favoring the formation of reactive species for dye degradation. Moreover, this work provides a novel direction to synthesize S-scheme heterostructure photocatalysts for application in wastewater treatment.

Plant-based synthesis of ZnO–CeO2–MgO nanocomposite using Ocimum Basilicum L seed extract: Biological effects and photocatalytic activity

Recently, ternary nanocomposites have attracted the attention of researchers because of their extraordinary photocatalytic, biological, and optical attributes. In this study, for the first time, ZnO–CeO2–MgO ternary nanocomposite successfully was synthesized by green chemistry approach using Ocimum Basilicum L extract seed as a stabilizing agent. This perspective is noteworthy because it could reduce the environmental impacts of chemical synthesis methods. Various methods, including X-ray diffraction pattern (XRD), Field emission scanning electron microscopy (FE-SEM)/Mapping/Energy dispersive spectroscopy (EDS), Transmission electron microscopy (TEM), Diffuse reflectance spectroscopy (DRS), and Fourier-transform infrared spectroscopy (FTIR) were utilized to assess the structural, morphological, and size of the nanocomposite. According to the XRD and FESEM results, the crystal structure and spherical morphology of the nanocomposite were confirmed. The photocatalytic activity of the produced ternary nanocomposite was assessed for degradation of methylene blue (MB) dye below UV irradiation. The results show that nanocomposites have potential applications in wastewater treatment. Finally, the MTT method was carried out on Huh-7 cancer cells to determine the cytotoxicity of the produced nanocomposite, so that the dose-dependent cytotoxic behavior of the nanocomposite was reported with an IC50 value of about 500 μg/mL.

Effect of montmorillonite nanosheets on the adsorption performance of hydrogel beads and the study of column adsorption

In this work, hydrogel beads with 3D network structure were successfully prepared using montmorillonite nanosheets (MMTNS) combined with macromolecule polymers. Batch adsorption tests revealed that the increase in exfoliation degree of MMTNS was beneficial to improve the methylene blue (MB) adsorption on hydrogel beads (HB). In addition, the HB with 25 % MMTNS-3 dosage achieved high mechanical strength and reached the maximum adsorption capacity of 543.1 mg/g. Effects of MB concentration (40–120 mg/L), adsorbent dosage (1–1.5 g) and flow rate (5–15 mL/min) on fixed-bed column adsorption indicated that the HB column exhibited an excellent dynamic adsorption performance and recycling performance, much better than the D113 resin. The good fits of Pseudo-first-order model and Pseudo-second-order model and a better Langmuir model fitting result implied a monolayer chemical adsorption and physical adsorption nature of MB on HB. Moreover, scanning electron microscope combined with the energy dispersive spectrometer, fourier transform infrared spectroscope and X-ray photoelectron spectroscopy measurements indicated that the adsorption mechanism was mainly attributed to Ca ion-exchange and chemical bonding of –COOH and –OH groups with MB. Such hydrogel beads showed a good potential in the application of practical wastewater treatment.

2D/2D Ni-MOF/BiOCl S-scheme heterojunction with boosted charge transfer and photocatalytic degradation of tetracycline

Constructing S-scheme heterojunction with boosted charge separation efficiency and high photoredox ability is a promising strategy in photocatalytic wastewater treatment. Herein, we report a novel S-scheme photocatalyst composed of two-dimensional (2D) nanosheets (NSs) of Ni-based metal-organic framework (Ni-MOF) and 2D BiOCl NSs. Such a unique 2D/2D stacking structure affords a large contact area at the interface, which promotes electron transfer and ensures the construction of S-scheme heterojunction between Ni-MOF and BiOCl. Benefitting from the efficient charge transfer and sufficient redox ability, the developed Ni-MOF/BiOCl heterojunctions exhibit enhanced photocatalytic performance for tetracycline (TC) degradation. Especially, the optimum 0.1Ni-MOF/BiOCl catalyst achieves a remarkable TC removal rate constant of 0.00274 min−1, 7.21 folds larger than that of single BiOCl (k = 0.00038 min−1). This study offers an ideal strategy for designing and fabricating novel S-scheme heterojunction photocatalysts with applicability in wastewater treatment

Interspecies ecological competition rejuvenates decayed Geobacter electroactive biofilm.

Bioelectrochemical systems (BESs) exploit electroactive biofilms (EABs) for promising applications in biosensing, wastewater treatment, energy production, and chemical biosynthesis. However, during the operation of BESs, EABs inevitably decay. Seeking approaches to rejuvenate decayed EABs is critical for the sustainability and practical application of BESs. Prophage induction has been recognized as the primary reason for EAB decay. Herein, we report that introducing a competitive species of Geobacter uraniireducens suspended prophage induction in Geobacter sulfurreducens and thereby rejuvenated the decayed G. sulfurreducens EAB. The transcriptomic profile of G. sulfurreducens demonstrated that the addition of G. uraniireducens significantly affected the expression of metabolism- and stress response system-related genes and in particular suppressed the induction of phage-related genes. Mechanistic analyses revealed that interspecies ecological competition exerted by G. uraniireducens suppressed prophage induction. Our findings not only reveal a novel strategy to rejuvenate decayed EABs, which is significant for the sustainability of BESs, but also provide new knowledge for understanding phage-host interactions from an ecological perspective, with implications for developing therapies to defend against phage attack.

Synthesis of AZO-Coated ZnO Core-Shell Nanorods by Mist Chemical Vapor Deposition for Wastewater Treatment Applications.

AZO-coated ZnO core-shell nanorods were successfully fabricated using the mist chemical vapor deposition method. The influence of coating time on the structural, optical, and photocatalytic properties of zinc oxide nanorods was investigated. It was observed that the surface area of AZO-coated ZnO core-shell nanorods increased with an increase in coating time. The growth orientation along the (0001) crystal plane of the AZO thin film coating was the same as that of zinc oxide nanorods. The crystallinity of AZO-coated ZnO core-shell nanorods was significantly improved as well. The optical transmittance of AZO-coated ZnO core-shell nanorods was greater than 55% in the visible region. The degradation efficiency for methyl red dye solution increased with an increase in coating time. The highest degradation efficiency was achieved by AZO-coated ZnO core-shell nanorods with a coating duration of 20 min, exhibiting a degradation rate of 0.0053 min-1. The photodegradation mechanism of AZO-coated ZnO core-shell nanorods under ultraviolet irradiation was revealed.

Think before throw: waste chili stalk powder for facile scavenging of cationic dyes from water.

Chili stalk powder (CS), a non-conventional adsorbent, has been exercised for facile removal of cationic dyes from simulated and wastewater by batch technique. The prepared material has been characterized by Fourier-transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller analysis (BET), powder X-ray diffraction (powder XRD), and pHZPC and tested best with methylene blue and crystal violet under ambient conditions. FTIR denotes the presence of carbonyl and polyphenolic groups, responsible for dye adsorption. BET surface area analysis evaluates the porous nature and specific surface area of the material, and powder XRD confirms its amorphous nature. The porous structure could be ascertained from the FESEM image, and energy dispersive X-ray analysis (EDX) confirms the elemental composition. The pH above pHzpc shows an increase in removal efficiency. The maximum adsorption capacities are 49.53 and 36.88mg/g for methylene blue (MB) and crystal violet (CV) respectively. Linear as well as non-linear plots for kinetic and isotherm models were studied. Both dye uptake fits the linear plot of Langmuir adsorption isotherm (R2 = 0.999 and 0.995) and pseudo-second-order kinetics (R2 = 0.998 and 0.999). In the non-linear plot, the adsorption process for both dyes fit Langmuir (R2 = 0.999 for MB and R2 = 0.983 for CV) as well as Freundlich adsorption (R2 = 0.999 for MB and R2 = 0.994 for CV). 75.48% crystal violet (CV) and 73.35% methylene blue (MB) regeneration were successful in 1:1 methanol medium and reused for up to three cycles. The uptake mechanism is suggested to be a union of π-π stacking, electrostatic interaction, and weak hydrogen bonding. The material was tested with industrial effluent to prove its application in real wastewater treatment. Moreover, the material shows superior adsorption capacity than contemporary phytosorbents. To conclude, a zero-cost adsorbent using green chili stalk has been demonstrated for wastewater treatment.