Temperature and photosensitive PVDF-g-PNIPAAm/GPE-PDA@ZnO composite membranes with efficient dyes separation capability and light-cleaning function

Abstract

In this paper, PVDF-g-PNIPAAm/GEP-PDA@ZnO composite membranes that can undergo light-induced structural response and photodegradation to achieve self-cleaning have been designed and applied to the separation and purification of dye wastewater. The membranes were prepared by blending graphene (GPE)-polydopamine (PDA)-coated zinc oxide (ZnO) core–shell particles into the PVDF-g-PNIPAAm matrix with a non-solvent induced phase separation technique. The GPE and ZnO are tightly bonded by highly adhesive PDA to form a “strawberry-like” core–shell structure. GPE absorbs light energy and converts it into heat, resulting in changes in PNIPAAm chain segments to expand the pore size for self-cleaning. While the membrane is warming up, GPE further promotes the activation of active groups on the surface of PDA@ZnO at high temperature, resulting in unique and excellent photothermal catalytic activity. As a result, the membrane achieves both self-cleaning and pollutant degradation, which results in an FRR of 99.6% after light cleaning. Moreover, the GPE-PDA@ZnO nanoparticle-modified PVDF-g-PNIPAAm membranes exhibit excellent cycling stability with a degradation flux recovery rate of more than 97% even after multiple UV cleaning. Thus, PVDF-g-PNIPAAm/GPE-PDA@ZnO composite membranes extend the versatility of PVDF-based membranes and show extraordinary potential for application in wastewater treatment.