Energy Storage Applications Research Articles

Hierarchical porous carbon materials for lithium storage: Preparation, modification, and applications.

Secondary battery as an efficient energy conversion device have been highly attractive for alleviating the energy crisis and environmental pollution. Hierarchical porous carbon materials with multiple sizes pore channels are considered as promising materials for energy conversion and storage applications, due to their high specific surface area and excellent electrical conductivity. Although many reviews have reported on carbon materials for different fields, systematic summaries about hierarchical porous carbon materials for lithium storage are still rare. In this review, we fist summarize the main preparation methods of hierarchical porous carbon materials, including hard template method, soft template method, and template-free method. The modification methods including porosity and morphology tuning, heteroatom doping, and multiphase composites are introduced systematically. Then, the recent advances in hierarchical porous carbon materials on lithium storage are summarized. Finally, we outline the challenges and future perspectives for the application of hierarchical porous carbon materials in lithium storage.

Novel Two-Dimensional MBenes: Synthesis, Properties, and Energy Storage and Electrocatalytic Applications of Two-Dimensional Metal Borides

Novel Two-Dimensional MBenes: Synthesis, Properties, and Energy Storage and Electrocatalytic Applications of Two-Dimensional Metal Borides

Novel route to enhance the thermo-optical performance of bicyclic diene photoswitches for solar thermal batteries

Harnessing solar energy by employing chemical photoswitches in molecular solar thermal (MOST) energy storage systems is a topic of appealing research interest. However, incorporating all the features desired for an ideal MOST system in a single photoswitching couple is challenging. Inspired by experimental synthesis, herein we report our attempt to enhance both the thermochemical and photophysical properties in a single-bridged bicyclic diene (BBD)-based photoswitch by elongating the unsaturated bridge with different heteroatomic units. To elucidate the best elongation unit, the energy storage capacity and the TBR barriers were accounted using the DLPNO-CCSD(T) and (8,8)-CASPT2 methods, respectively. The photophysical properties including the absorption onset, excitation wavelengths, and the absorption intensities were extensively investigated with the time-dependent calculations. The result provides information on the most versatile solvent to exhibit the best photoswitching behaviour which is beneficial for real-life energy storage applications. Additionally, the stability and reversibility of the photoswitching system with elongated unsaturated bridges have also been assessed. By means of the studied modification, the storage energy of 158.57 kJ/mol, energy storage density of 1.48 MJ/kg, TBR barrier of 136.36 kJ/mol, and the absorption onset of 305.00 nm is achieved in acetonitrile. These values are substantially higher when compared with the storage energy (96.06 kJ/mol), energy storage density (1.04 MJ/kg), and TBR barrier (121.76 kJ/mol) of prototype NBD/QC in the gas phase. The outcomes render useful insights into the stability and properties of bicyclic diene-based photoswitches having elongated unsaturated bridges and indeed paves the way for the rational design of practical MOST systems.

Unveiling the Supercapacitive Performance of B, P Dual‐Doped Graphene in Triple Redox Additives

AbstractDual heteroatom doping of graphene is currently presumed as more promising for energy storage applications. In addition, the development of energy density with multiple redox additives is paying special attention. Here, we report the fabrication of B, P dual‐doped graphene in three various weight combinations. The formation and the quantity of the prepared samples were investigated by XRD, FT‐IR, EDAX and XPS. The B, P dual‐doped graphene derived from the weight ratio of boron and phosphorus dopant in 1 : 3 has achieved an enriched gravimetric capacitance of 360 F g−1 at 1 A g−1 (1 M H2SO4) and greater than RGO (151 F g−1). The energy density of the fabricated symmetric supercapacitor cell is found to be 50 Wh kg−1 in triple redox additives in 1 M H2SO4 solution which is greater than KI (33 Wh Kg−1) and 1 M H2SO4 alone (5 Wh Kg−1) at 2 A g−1. Also, the same cell delivered an increased stability of 99.7 % of capacitance retained from its initial value after 7000 charge–discharge cycles at 5 A g−1.

Microwave-Assisted Synthesis of Few-Layer Ti3C2Tx Loaded with Ni0.5Co0.5Se2 Nanospheres for High-Performance Supercapacitors

Transition metal selenides have high theoretical capacities, making them attractive candidates for energy storage applications. Here, using the microwave-absorbing properties of the materials, we designed a simple and efficient microwave-assisted synthesis method to produce a composite made of nanospheres Ni0.5Co0.5Se2 (NCSe) and highly conductive, stable Ti3C2Tx MXene. The Ni0.5Co0.5Se2/Ti3C2Tx composites are characterized via scanning electron microscopy, X-ray diffraction, cyclic voltammetry, and electrochemical impedance spectroscopy. The findings indicate that 3D Ni0.5Co0.5Se2 bimetallic selenide nanospheres were uniformly loaded within the few-layer Ti3C2Tx MXene wrapper in a short period. The optimal NCSe/Ti3C2Tx−2 electrode can demonstrate a specific capacitance of 752.4 F g–1 at 1 A g–1. Furthermore, the asymmetric supercapacitor combined with activated carbon maintains a capacitance retention of 110% even after 5000 cycles. The method of directly growing active substances on few-layer Ti3C2Tx MXene will provide inspiration for the manufacture of high-pseudocapacitance supercapacitors.

Protective Interphases of Advanced Znic Anodes: Structure, Mechanisms, Fabrication Strategies and Characterization Techniques.

Aqueous zinc ion batteries (AZIBs) with metallic Zn anode have the potential for large-scale energy storage application due to their cost-effectiveness, safety, environmental-friendliness, and ease of preparation. However, the concerns regarding dendrite growth and side reactions on Zn anode surface hamper AZIB's commercialization. This review aims to give a comprehensive evaluation of the protective interphase construction and provide guildance to further improve the electrochemical performance of AZIBs. The failure behaviors of Zn metal anode including dendrite growth, corrosion, and hydrogen evolution are analyzed. Then, the applications and mechanisms of the constructed interphases are introduced, classified by the material species. The fabrication methods of the artificial interfaces are summarized and evaluated, including the in-situ strategy and ex-situ strategy. Finally, the characterization means of the interphases are discussed to give a full view for the study of Zn anode protection. Based on the analysis of this review, a stable and high-performance Zn anode could be designed by carefully choosing applied material, corresponding protective mechanism, and appropriate construction technique. Additionally, this review for Zn anode modification and construction techniques for anode protection in AZIBs may be helpful in other aqueous metal batteries with similar problems.

Realizing Outstanding Energy Storage Performance in KBT-Based Lead-Free Ceramics via Suppressing Space Charge Accumulation.

The great potential of K1/2Bi1/2TiO3 (KBT) for dielectric energy storage ceramics is impeded by its low dielectric breakdown strength, thereby limiting its utilization of high polarization. This study develops a novel composition, 0.83KBT-0.095Na1/2Bi1/2ZrO3-0.075 Bi0.85Nd0.15FeO3 (KNBNTF) ceramics, demonstrating outstanding energy storage performance under high electric fields up to 425kVcm-1: a remarkable recoverable energy density of 7.03Jcm-3, and a high efficiency of 86.0%. The analysis reveals that the superior dielectric breakdown resistance arises from effective mitigation of space charge accumulation at the interface, influenced by differential dielectric and conductance behaviors between grains and grain boundaries. Electric impedance spectra confirm the significant suppression of space charge accumulation in KNBNTF, attributable to the co-introduction of Na1/2Bi1/2ZrO3 and Bi0.85Nd0.15FeO3. Phase-field simulations reveal the emergence of a trans-granular breakdown mode in KNBNTF resulting from the mitigated interfacial polarization, impeding breakdown propagation and increasing dielectric breakdown resistance. Furthermore, KNBNTF exhibits a complex local polarization and enhances the relaxor features, facilitating high field-induced polarization and establishing favorable conditions for exceptional energy storage performance. Therefore, the proposed strategy is a promising design pathway for tailoring dielectric ceramics in energy storage applications.

Sandwich-structured SrTiO3/PEI composite films with high-temperature energy storage performance

Dielectric capacitors are widely used in aerospace and power systems due to their non-polluting, high power density and fast charge/discharge rates. Polyetherimide (PEI) exhibits excellent temperature tolerance, high withstand voltage and low dielectric loss. However, its relatively low dielectric constant restricts its energy storage density. In this paper, a sandwich-structured composite film with the outer layer of pure PEI and the middle layer of strontium titanate (SrTiO3)/PEI is prepared by the solution casting method. At room temperature, the composite film with 5 vol% two-dimensional (2D) SrTiO3 plates achieves an outstanding energy storage density of 19.46 J cm−3 and an ultra-high energy storage efficiency of 97.05% under an electric field of 630 MV m−1. Furthermore, this composite film exhibits a maximum energy storage density of 10.34 J cm−3 and an energy storage efficiency of 88.13% at 150 °C. Combined with finite element simulation results, it confirms that the synergistic effect of 2D SrTiO3 plates and sandwich-structured can effectively hinder the development of electric trees. This work presents a sophisticated approach to design and preparation of dielectric composites suitable for the applications of high-temperature energy storage.

An Electronic Structure Investigation of PEDOT with AlCl4− Anions—A Promising Redox Combination for Energy Storage Applications

In this work, we use density functional theory to investigate the electronic structure of poly(3,4-ethylenedioxythiophene) (PEDOT) oligomers with co-located AlCl4− anions, a promising combination for energy storage. The 1980s bipolaron model remains the dominant interpretation of the electronic structure of PEDOT despite recent theoretical progress that has provided new definitions of bipolarons and polarons. By considering the influence of oligomer length, oxidation or anion concentration and spin state, we find no evidence for many of the assertions of the 1980s bipolaron model and so further contribute to a new understanding. No self-localisation of positive charges in PEDOT is found, as predicted by the bipolaron model at the hybrid functional level. Instead, our results show distortions that exhibit a single or a double peak in bond length alternations and charge density. Either can occur at different oxidation or anion concentrations. Rather than representing bipolarons or polaron pairs in the original model, these are electron distributions driven by a range of factors. Distortions can span an arbitrary number of nearby anions. We also contribute a novel conductivity hypothesis. Conductivity in conducting polymers has been observed to reduce at anion concentrations above 0.5. We show that at high anion concentrations, the energy of the localised, non-bonding anionic orbitals approaches that of the system HOMO due to Coulombic repulsion between anions. We hypothesize that with nucleic motion in the macropolymer, these orbitals will interfere with the hopping of charge carriers between sites of similar energy, lowering conductivity.

Ceramic-Based Dielectric Materials for Energy Storage Capacitor Applications

Materials offering high energy density are currently desired to meet the increasing demand for energy storage applications, such as pulsed power devices, electric vehicles, high-frequency inverters, and so on. Particularly, ceramic-based dielectric materials have received significant attention for energy storage capacitor applications due to their outstanding properties of high power density, fast charge–discharge capabilities, and excellent temperature stability relative to batteries, electrochemical capacitors, and dielectric polymers. In this paper, we present fundamental concepts for energy storage in dielectrics, key parameters, and influence factors to enhance the energy storage performance, and we also summarize the recent progress of dielectrics, such as bulk ceramics (linear dielectrics, ferroelectrics, relaxor ferroelectrics, and anti-ferroelectrics), ceramic films, and multilayer ceramic capacitors. In addition, various strategies, such as chemical modification, grain refinement/microstructure, defect engineering, phase, local structure, domain evolution, layer thickness, stability, and electrical homogeneity, are focused on the structure–property relationship on the multiscale, which has been thoroughly addressed. Moreover, this review addresses the challenges and opportunities for future dielectric materials in energy storage capacitor applications. Overall, this review provides readers with a deeper understanding of the chemical composition, physical properties, and energy storage performance in this field of energy storage ceramic materials.

Design, Perspective, and Challenge of Niobium‐Based Anode Materials for High‐Energy Alkali Metal‐Ion Batteries

AbstractThe rapid advancement of clean energy has aroused an increased demand for advanced energy storage systems. Alkali metal‐ion batteries (AMIBs) including lithium/sodium/potassium‐ion batteries (LIBs/SIBs/PIBs) play a crucial role in these systems, and their development is closely related to the progress of electrode materials. Niobium (Nb)‐based materials exhibit distinctive features such as quasi‐2D framework, high intercalation potential, robust pseudo‐capacitance effect, and minimal volume expansion during cycles. These characteristics render them highly valuable for energy storage applications. However, the low conductivity and limited capacity of Nb‐based electrode materials significantly limit their widespread development in energy storage applications. To address these challenges, various strategies have been explored. This review primarily summarizes the recent advancements in research on Nb‐based anode materials for AMIBs over the past decade. The synthesis strategy, structure design, and material composite of Nb‐based materials are systematically discussed, and the performances of different types of batteries are also well analyzed and compared. Meanwhile, their merits in the fast‐charging realm are then highlighted. Importantly, this review presents the key issues and challenges encountered by Nb‐based anode materials in future energy storage, along with novel concepts and solutions for the research and development of next‐generation Nb‐based anodes.

Gas-Phase-Induced Engineering for Fabrication of 3D Hierarchical Porous Nickel and Its Application toward High-Performance Supercapacitors.

Commercial nickel foam (NF), which is composed of numerous interconnected ligaments and hundred-micron pores, is widely acknowledged as a current collector/electrode material for catalysis, sensing, and energy storage applications. However, the commonly used NF often does not work satisfactorily due to its smooth surface and hollow structure of the ligaments. Herein, a gas-phase-induced engineering, two-step gaseous oxidation-reduction (GOR) is presented to directly transform the thin-walled hollow ligament of NF into a three-dimensional (3D) nanoporous prism structure, resulting in the fabrication of a unique hierarchical porous nickel foam (HPNF). This 3D nanoporous architecture is achieved by utilizing the spontaneous reconstruction of nickel atoms during volume expansion and contraction in the GOR process. The process avoids the involution of acid-base corrosion and sacrificial components, which are facile, environmentally friendly, and suitable for large-scale fabrication. Furthermore, MnO2 is electrochemically deposited on the HPNF to form a supercapacitor electrode (HPNF/MnO2). Because of the fully open structure for ion transport, superhydrophilic properties, and the increased contact area between MnO2 and the current collector, the HPNF/MnO2 electrode exhibits a high specific capacitance of 997.5 F g-1 at 3 A g-1 and remarkable cycling stability with 99.6% capacitance retention after 20000 cycles in 0.1 M Na2SO4 electrolyte, outperforming most MnO2-based supercapacitor electrodes.

Centrifugal-Gravity-Enforced Deposition of MXene Electrodes for High-Performance and Ultrastable Microsupercapacitors.

Two-dimensional (2D) transition metal carbides, known as MXenes, have captured much attention for their excellent electrical conductivity and electrochemical capability. However, the susceptibility of MXenes to oxidation, particularly Ti3C2Tx transforming into titanium dioxide upon exposure to ambient air, hinders their utilization for extended operational life cycles. This work introduces a simple and straightforward method for producing ultrathin MXene electrode films tailored for energy storage applications, employing centrifugal-gravity force. Our approach significantly suppresses the oxidation phenomenon that arises in MXene materials and also effectively prevents the recrystallization of potentially residual LiF during the film formation. Additionally, the utilization of this MXene electrode in an all-solid-state microsupercapacitor (MSC) with an interdigitated pattern demonstrates an exceptionally improved and stable electrochemical performance. This includes a high volumetric capacitance of approximately 467 F cm-3, an energy density of around 65 mWh cm-3, and impressive long-term cycle stability, retaining about 94% capacity after 10 000 cycles. Moreover, a downsized MSC device exhibits remarkable mechanical durability, retaining over 98% capacity even when folded and sustaining stability over extended periods. Therefore, we believe that this study provides valuable insights for advancing highly integrated energy storage devices, ensuring exceptional electrochemical efficiency and prolonged functionality in diverse environments, whether ambient or humid.

Ultra‐High Energy Density in Cyanoethyl Biomass Polymers

AbstractDielectric polymers are essential to capacitive capacitors widely used in modern electronic and electrical systems. Most useful dielectric polymers are derived from petroleum while environmentally sustainable dielectric biomass remains mostly unexplored although they are abundant, renewable, and cost‐effective. Here an ultrahigh energy density in cyanoethyl cellulose (CEC) and cyanoethyl pullulan (CEP) obtained by replacing the hydroxyl groups of cellulose and pullulan with cyanoethyl is reported. Large dielectric constants of 16.7 and 20.0 in CEC and CEP due to the strong polarity of cyanoethyl which are comparable to high‐dielectric ferroelectric polymers are shown. CEC and CEP show nearly no degradation of the dielectric constant with increasing electric fields, inhabiting the early polarization saturation and thus leading to improved energy density, which is different from relaxor ferroelectric polymers. Consequently, solution‐processable CEP films exhibit an ultrahigh discharged energy density of 28.2 J cm−3 with an efficiency of 72% at 600 MV m−1, outperforming other all‐organic dielectric biomass materials. The work paves the way for the development of high‐performance dielectric biomass for energy storage applications.

Organic Electrode Materials for Energy Storage and Conversion: Mechanism, Characteristics, and Applications.

ConspectusLithium ion batteries (LIBs) with inorganic intercalation compounds as electrode active materials have become an indispensable part of human life. However, the rapid increase in their annual production raises concerns about limited mineral reserves and related environmental issues. Therefore, organic electrode materials (OEMs) for rechargeable batteries have once again come into the focus of researchers because of their design flexibility, sustainability, and environmental compatibility. Compared with conventional inorganic cathode materials for Li ion batteries, OEMs possess some unique characteristics including flexible molecular structure, weak intermolecular interaction, being highly soluble in electrolytes, and moderate electrochemical potentials. These unique characteristics make OEMs suitable for applications in multivalent ion batteries, low-temperature batteries, redox flow batteries, and decoupled water electrolysis. Specifically, the flexible molecular structure and weak intermolecular interaction of OEMs make multivalent ions easily accessible to the redox sites of OEMs and facilitate the desolvation process on the redox site, thus improving the low-temperature performance, while the highly soluble nature enables OEMs as redox couples for aqueous redox flow batteries. Finally, the moderate electrochemical potential and reversible proton storage and release of OEMs make them suitable as redox mediators for water electrolysis. Over the past ten years, although various new OEMs have been developed for Li-organic batteries, Na-organic batteries, Zn-organic batteries, and other battery systems, batteries with OEMs still face many challenges, such as poor cycle stability, inferior energy density, and limited rate capability. Therefore, previous reviews of OEMs mainly focused on organic molecular design for organic batteries or strategies to improve the electrochemical performance of OEMs. A comprehensive review to explore the characteristics of OEMs and establish the correlation between these characteristics and their specific application in energy storage and conversion is still lacking.In this Account, we initially provide an overview of the sustainability and environmental friendliness of OEMs for energy storage and conversion. Subsequently, we summarize the charge storage mechanisms of the different types of OEMs. Thereafter, we explore the characteristics of OEMs in comparison with conventional inorganic intercalation compounds including their structural flexibility, high solubility in the electrolyte, and appropriate electrochemical potential in order to establish the correlations between their characteristics and potential applications. Unlike previous reviews that mainly introduce the electrochemical performance progress of different organic batteries, this Account specifically focuses on some exceptional applications of OEMs corresponding to the characteristics of organic electrode materials in energy storage and conversion, as previously published by our groups. These applications include monovalent ion batteries, multivalent ion batteries, low-temperature batteries, redox flow batteries with soluble OEMs, and decoupled water electrolysis employing organic electrodes as redox mediators. We hope that this Account will make an invaluable contribution to the development of organic electrode materials for next-generation batteries and help to unlock a world of potential energy storage applications.

Enhanced Supercapacitive Performance in Catalyst‐Free Binary Composite SnO2–RuO2 Nanostructured Thin Films for Symmetric Supercapacitor Device

In the present work, thin film electrodes of ruthenium oxide (RuO2), tin oxide (SnO2), and their composite SnO2–RuO2 are deposited on 304 stainless steel substrates using pulsed laser deposition (PLD). These nanostructured electrodes are then evaluated for their suitability in electrochemical energy storage applications. A symmetric supercapacitor device (SSD) is constructed using the SnO2–RuO2 composite electrodes. Compared to individual SnO2 and RuO2 electrodes, the composite electrodes exhibit enhanced specific capacitance and cycle life. This improvement is attributed to modifications in surface morphology and electronic properties. This modified surface morphology of the composite electrode, creates favourable conditions for electrolyte interaction and ion transport, ultimately contributing to the observed increase in specific capacitance. Specifically, the composite electrode demonstrates a specific capacitance of 170.2 Fg−1 at a current density of 0.1 mA cm−2, outperforming SnO2 (37.4 Fg−1). The SnO2–RuO2//SnO2–RuO2 SSD exhibites a specific capacitance of 70.0 Fg−1 at a current density of 0.1 mA cm−2, coupled with energy density and power density values of 19.05 Wh kg−1 and 645 W kg−1, respectively, within a voltage window of 1.4 V. The SSD displays an impressive capacitive retention of 81.27% over 10 000 cycles, indicating its potential for practical energy storage applications.

Rectification and converter control of the FPSLGs for energy storage applications

AbstractThis article presents two power converters with controllers attached to the Free‐Piston Stirling Linear Generator (FPSLG) and energy storage system (ESS). The rectifier uses hysteresis‐SVPWM current regulation and CB‐SPWM, while the buck‐boost converter utilizes the dual‐loop PI control method. The storage battery receives energy from a linear‐generator with a rectifier and converter. The FPSE and linear motors in the FPSLG convert thermal to electrical energy. A two‐level electrical energy conversion technique using a three‐phase AC signal to DC and DC‐DC converter has been devised to reduce output electrical energy oscillation as well as stabilize the generating system's DC power. Initially, the FPSE's nonlinear model and the three‐phase permanent magnet linear‐motor's linear mathematical model were created and followed by the ESS and control mechanism simulation. The simulation shows that the ESS system and control approach can give stable power to the storage battery using linear‐generator power. The PR controller replaces the PI controller in the position loop to improve frequency and displacement tracing. The control system design was simulated in MATLAB and the topology's feasibility and correctness were confirmed. Comparative analysis shows that, rectifier uses the H‐SVPWM's unity power factor of AC and stability controllability of the DC‐side voltage is better than the CB‐SPWM approach.

Enhanced Energy Storage Performance through Controlled Composition and Synthesis of 3D Mixed Metal-Oxide Microspheres

Binary transition metal oxide complexes (BTMOCs) in three-dimensional (3D) layered structures show great promise as electrodes for supercapacitors (SCs) due to their diverse oxidation states, which contribute to high specific capacitance. However, the synthesis of BTMOCs with 3D structures remains challenging yet crucial for their application. In this study, we present a novel approach utilizing a single-step hydrothermal technique to fabricate flower-shaped microspheres composed of a NiCo-based complex. Each microsphere consists of nanosheets with a mesoporous structure, enhancing the specific surface area to 23.66 m2 g−1 and facilitating efficient redox reactions. When employed as the working electrode for supercapacitors, the composite exhibits remarkable specific capacitance, achieving 888.8 F g−1 at 1 A g−1. Furthermore, it demonstrates notable electrochemical stability, retaining 52.08% capacitance after 10,000 cycles, and offers a high-power density of 225 W·kg−1, along with an energy density of 25 Wh·kg−1, showcasing its potential for energy storage applications. Additionally, an aqueous asymmetric supercapacitor (ASC) was assembled using NiCo microspheres-based complex and activated carbon (AC). Remarkably, the NiCo microspheres complex/AC configuration delivers a high specific capacitance of 250 F g−1 at 1 A g−1, with a high energy density of 88 Wh kg−1, for a power density of 800 W kg−1. The ASC also exhibits excellent long-term cyclability with 69% retention over 10,000 charge–discharge cycles. Furthermore, a series of two ASC devices demonstrated the capability to power commercial blue LEDs for a duration of at least 40 s. The simplicity of the synthesis process and the exceptional performance exhibited by the developed electrode materials hold considerable promise for applications in energy storage.

Functional Soft Materials with Resistance to Liquid Leakage for Thermal Energy Storage

AbstractFunctional soft materials have great potential commercial applications in thermal energy storage, which are required to have a long life, good flexibility, and resistance to liquid leakage. Herein, a composite hydrogel with thermal storage properties is prepared through coupling molecular self‐assembly and in situ polymerization. Hydrophobic stearic acid (SA), as a thermal storage phase change material (PCM), is dispersed in polyacrylamide (PAM) hydrogel network in the form of oil–water emulsion (O/W). The PAM polymer network with good flexibility physically limits high‐frequency collision between SA PCM droplets. This unique design avoids demulsification in phase change emulsion so that the as‐prepared hydrogel composite can resist liquid leakage. The PAM hydrogel network plays the role of heterogeneous nucleation, resulting in the super‐cooling of SA emulsion at only 0.3 °C. On the other hand, SA PCM droplets in as‐prepared soft material do not directly contact with liquid water, so melting/crystallization process is independent of water. As a result, the soft material exhibits a thermal storage density of up to 99.3 J g−1. The present study is an important step toward designing soft energy storage materials.

Thermo‐physical characterisation of natural rocks and impact analysis of variations in their thermo‐physical properties on thermal storage performance

AbstractIn this study, the thermal characterisation of natural rock samples from Zimbabwe for low‐temperature industrial thermal energy storage (TES) applications was carried out. Thermal stability, specific heat capacity, thermal diffusivity, thermal conductivity and density were determined. Variations in these parameters were evaluated and their impact on thermal storage performance was analysed. Basalt and dolerite samples from different locations were found to have average specific heat capacities of 826 and 853 J/kg K, respectively, at room temperature. Insignificant variations were observed with differences of 3.4% for basalt and 1.7% for dolerite samples. Also, negligible differences of 0.3% and 0.7% in densities for rocks of the same type but of different origins were obtained for basalt and dolerite samples, respectively. However, significant variations in thermal diffusivity of all the igneous and metamorphic samples were observed with quartzite rock exhibiting the highest value of 2.1 × 10−6 m2/s, while the values for the other samples range from 0.9 × 10−6 to 1.6 × 10−6 m2/s. This implies that the thermal efficiency of sensible TES systems that use different or the same rock types from different locations can be significantly high to be overlooked. Thermo‐gravimetric analysis results revealed that the rock samples studied have good thermal stability for low‐temperature heat storage applications.