Antimicrobial Properties Research Articles

REVIEW ON CHEMICAL CONSTITUENTS AND BIOLOGICAL ACTIVITIES OF GENUS JUNIPER

Juniper species belonging to the family Cupressaceae are evergreen shrubs or trees that thrive in dry, rocky, or sandy soils. There are roughly 67 species in the genus, all indigenous to the northern hemisphere. Several species of this genus have been reported to have a variety of pharmacological activities, including diuretic, anti-inflammatory, anti-fungal, hepatoprotective, antidiabetic, and anti-hyperlipidemic properties. Additionally, some species have been shown to have antioxidant, antimicrobial, and neuroprotective properties in Parkinson's disease patients. The majority of these activities are caused by the phytochemical constituents found in these species. This article covers most of the constituents of plants of the genus juniper reported from 2010 to 2023. Furthermore, the biological activities of plants of the genus juniper are presented.

Chitosan microflower-embedded gelatin sponges for advanced wound management and hemostatic applications

The study explored the antimicrobial and antibiofilm properties of chitosan microflowers (CMF) in sponges. The main objective was to enhance the manufacture of CMF by employing varying quantities of calcium chloride (CaCl2) and tripolyphosphate (TPP). CMF was then combined with gelatin (GE) in different proportions to produce three sponge samples: CMF0@GE, CMF1@GE, and CMF2@GE. The CMF had a morphology like that of a flower and produced surfaces with a porous sponge-like structure. The antibacterial activity, as determined by the zone of inhibition (ZOI), increased with greater doses of CMF. Among the tested samples, CMF2@GE had the greatest activity against Pseudomonas aeruginosa, Klebsiella pneumoniae, Staphylococcus aureus, and Enterococcus faecium. CMF2@GE successfully suppressed biofilm formation, decreased clotting time to an average of 212.67 s, and exhibited excellent biocompatibility by preserving over 90 % viability of human skin fibroblast cells at dosages below 100 μg/mL. The results indicate that gelatin sponges filled with CMF have considerable promise as flexible medical instruments for wound healing and infection control.

A poly (lactic-co-glycolic acid) self-pumping Janus dressing with bidirectional biofluid transport for diabetic wound healing via anti-bacteria and pro-angiogenesis

Diabetic wound healing poses a substantial challenge owing to bacterial infections, insufficient angiogenesis, and excessive exudates. Currently, most of the clinical dressings used for diabetic wounds are still conventional dressings such as gauze. In this study, a three-layer Janus dressing was developed via continuous electrostatic spinning. The top-layer was composed of polylactic acid-glycolic acid and hydroxyapatite doped with silver ions and silicate. The hydrophobic top-layer prevented the adhesion of foreign bacteria. The mid-layer was composed of polyethylene glycol, polylactic acid-glycolic acid and hydroxyapatite doped with silver ions and silicate facilitated exudate absorption and bioactive ion release. The modified sub-layer containing polylactic acid-glycolic acid, hydroxyapatite doped with silver ions and silicate and sodium alginate microspheres enabled both the transport of wound exudate from the wound bed to dressing and the backflow of bioactive silver ions and silicate to the wound bed, thereby reducing infection and stimulating angiogenesis. Through in vivo and in vivo experiments, the Janus dressing showed to have antimicrobial, angiogenic, and exudate-control properties that accelerate healing in diabetic wounds. As a novel dressing, the multifunctional, self-pumping Janus wound dressing with bi-directional biofluidic transport offers a new approach to diabetic wound healing.

Anti-Inflammatory Activities of (+)-Afzelechin against Lipopolysaccharide-Induced Inflammation.

In this study, we investigated the potential protective effects of (+)-afzelechin (AZC), a natural compound that is derived from Bergenia ligulata, on lipopolysaccharide (LPS)-induced inflammatory responses. AZC is known to have antioxidant, anticancer, antimicrobial, and cardiovascular protective properties. However, knowledge regarding the therapeutic potential of AZC against LPS-induced inflammatory responses is limited. Thus, we investigated the protective attributes of AZC against inflammatory damage caused by LPS exposure. We examined the effects of AZC on heme oxygenase (HO)-1, cyclooxygenase (COX)-2, and inducible nitric oxide synthase (iNOS) in LPS-activated human umbilical vein endothelial cells (HUVECs). In addition, the effects of AZC on the expression of iNOS, tumor necrosis factor (TNF)-α, and interleukin (IL)-1β were analyzed in the lung tissues of LPS-injected mice. Data revealed that AZC promoted the production of HO-1, inhibited the interaction between luciferase and nuclear factor (NF)-κB, and reduced the levels of COX-2/PGE2 and iNOS/NO, thereby leading to a decrease in the signal transducer and activator of transcription (STAT)-1 phosphorylation. Moreover, AZC facilitated the nuclear translocation of Nrf2, increased the binding activity between Nrf2 and the antioxidant response elements (AREs), and lowered the expression of IL-1β in the LPS-treated HUVECs. In the animal model, AZC significantly reduced the expression of iNOS in the lung tissue structure and the TNF-α level in the bronchoalveolar lavage fluid. These findings demonstrate that AZC possesses anti-inflammatory properties that regulate iNOS through the inhibition of both NF-κB expression and p-STAT-1. Consequently, AZC has potential as a future candidate for the development of new clinical substances for the treatment of pathological inflammation.

Transition metal complexes of hydrazones as potential antimicrobial and anticancer agents: A short review.

Hydrazones display an interesting profile of biological activities, which includes mainly antimicrobial and antiproliferative properties. Hydrazones also play an important role in the synthesis of heterocyclic rings and in coordination chemistry. Currently, the synthesis of complexes of hydrazones with transition metals is quite frequently reported in the scientific literature. The interest in this topic is largely due to diverse biological activities of the metal complexes of hydrazones that in some cases are much more effective than hydrazones themselves. This review focuses on the complexes of hydrazones with transition metals which display antibacterial, antitubercular, antifungal and anticancer activities. In the following subchapters devoted to a given activity, an attempt has been made to present the most active complexes of hydrazones, their trends in their activity and application in medicinal chemistry. The paper presents the literature data from 2009 to 2023. This review constitutes a useful guide for the researchers who intend to synthesize and investigate complexes of hydrazones in terms of their antimicrobial and anticancer activities.

Synthesis, characterization, and evaluation of antioxidant, antimicrobial and drug likeness properties of indole containing 1,3,4-oxadiazoles

We have synthesized fourteen new 1,3,4-oxadiazole hybrid compounds (68a-68n) that contain indole. The characterization of fourteen new indolo-3,4-oxadiazoles derivatives (68a-68n) was performed using techniques such as Proton Nucelar Magnetic Resonance (1H NMR) and Liquid Chromatography – Mass spectrometry (LC-MS). All indolo-3,4-oxadiazoles derivatives (68a–68n) were examined for its antioxidant and antibacterial properties in in-vitro conditions. The scavenging activity was measured in order to assess their antioxidant capabilities. Among 14 compounds, 68a, 68i and 68n showed better scavenging activity. The antibacterial activity of all indolo-3,4-oxadiazoles derivatives (68a–68n) was tested against Staphylococcus aureus, Escherichia coli, Pseudomonas aeroginosa and Klebsiella pneumonia. All of the compounds (68a-n) exhibited moderate to significant activity. The indolo-3,4-oxadiazoles derivatives 68b, 68e, 68h and 68j shown more effectiveness against Staphylococcus aureus, Escherichia coli, Pseudomonas aeroginosa. The drug-likeness property of all indolo-3,4-oxadiazoles derivatives (68a–68n) was tested following Lipinski’s policies. The compounds (68a–68n) are all in accordance with Lipinski’s policies and proved to have enhanced oral bioavailability.

SILAR deposited Antiviral silver-doped Ceria nano-films

Amid the COVID-19 global pandemic, ceria nanomaterials (CN) have garnered renewed interest as potential antiviral agents due to their ability to generate reactive oxygen species (ROS) on their surfaces. Enhancing ROS generation through precise defect engineering is key to improving these antiviral properties. This can be achieved through various methods, such as altering nano-dimensions and doping. In this context, we report on silver-doped ceria thin films. We have employed a cost-effective SILAR (Successive Ionic Layer Adsorption and Reaction) method for ceria nano-film deposition, which offers excellent control over film thickness. Utilizing an Arduino-controlled layer-by-layer (LBL) setup, we achieved precise control over the deposition process. This method facilitated the easy doping of ceria nano-films with silver ions. The silver-doped SILAR ceria thin films of varying thicknesses were subjected to antibacterial testing against E. coli bacteria. The samples with the highest antibacterial activity were further tested for antiviral efficacy against Feline calicivirus. The 80 SILAR Layers Ag-Ceria sample exhibited the best activity, completely deactivating the viral titer (105). This sample, when further tested against OC43 coronavirus, demonstrated a >99% reduction in virus titer. The mechanisms underlying these antimicrobial properties were investigated using antioxidative testing assays.

Novel nanoemulsion-loaded hydroxyl propyl methyl cellulose films as bioactive food packaging materials containing Satureja khuzestanica essential oil

This study was conducted in response to a gap in the production of hydroxyl propyl methyl cellulose (HPMC) edible films from Satureja khuzestanica essential oil (SKEO) and to survey the preservation effect of natural edible films on the vapor phase. For these purpose varying concentrations of SKEO ranging from 1.25 % (EF1) to 7.5 % (EF5) led to producing different edible films for potential food packaging applications and the physicochemical, mechanical, and antimicrobial properties of edible films were evaluated across solid, liquid, and vapor phases. The incorporation of nanoemulsions into the polymer films led to an increase in thickness and opacity, while the addition of SKEO resulted in reduced water solubility without impacting film density. Notably, the antibacterial efficacy of the films was most pronounced against S. aureus, with a zone of inhibition measuring 41 ± 1 mm for EF5 on solid media. Time killing assays further demonstrated that specific formulations (EF3, EF4, and EF5) were capable of eradicating all microorganisms within 60 min. Moreover, SKEO edible films exhibited significant inhibitory effects against E. coli under refrigeration conditions (4 °C). These results highlighted the effect of herbal edible films in enhancing the functionality of bioactive food packaging technologies.

A carboxymethyl-resistant starch/polyacrylic acid semi-IPN hydrogel with excellent adhesive and antibacterial properties for peri-implantitis prevention

Hydrogels possess inherent characteristics that render them promising for the prevention of peri-implantitis. Nonetheless, hydrogels with singular network structures are incapable of concurrently achieving the desired adhesion and mechanical properties. In this work, a carboxymethyl resistant starch/polyacrylic acid semi-interpenetrating (CMRS/PAA semi-IPN) hydrogel was successfully prepared in one step. Its morphology, structure, mechanical properties, and adhesion properties were systematically assessed, which revealed a homogeneously porous structure with a commendable mechanical strength of 67.317 kPa and an adhesion strength of 63 kPa. Ciprofloxacin (Cip) was loaded in the CMRS/PAA hydrogel via in situ compounding. The in vitro kinetic study of drug release shows that the slow drug release efficiency exceeds 90% in the weakly acidic microenvironment at the infection site after 72h, indicating enhanced antimicrobial properties. The Cip-loaded hydrogel also exhibits a remarkable bacterial inhibition rate exceeding 99% against the pathogenic bacterium P. gingivalis and good cytocompatibility and hemocompatibility in vitro. In summary, the current work explored a novel solution and direction for the development of anti-infective medical materials applicable to dental implants.

Phytochemical Analysis and Evaluation of Antioxidant and Antimicrobial Properties of Essential Oils and Seed Extracts of Anethum graveolens from Southern Morocco: In Vitro and In Silico Approach for a Natural Alternative to Synthetic Preservatives

Anethum graveolens is an aromatic plant traditionally used as an antispasmodic and carminative. The objective of this study is to analyze the chemical composition of the essential oils and extracts obtained from seeds gathered in Errachidia, southern Morocco. Additionally, the antioxidant and antimicrobial properties of these oils and extracts will be evaluated. GC-MS analysis of the EO isolated by hydrodistillation revealed that its main compounds were E-anethole (38.13%), estragole (29.32%), fenchone (17.21%), and α-pinene (7.37%). The phenolic components were extracted using the methods of decoction and Soxhlet. The assay of the phenolic compounds showed that A. graveolens seeds contained considerable amounts of polyphenols, flavonoids, and condensed tannins, with variable levels depending on the extract analyzed. HPLC/UV-ESI-MS analyses performed on the decoction revealed a structural diversity of the molecules present in this extract, the most important of which were umbelliferone (12.35%), 3-hydroxyflavone (11.23%), rosmanol (8.95%), biotin (8.36%), emmotin H (4.91%), and coumarin (4.21%). The antioxidant activity, as determined by three techniques (DPPH•, FRAP, and CAT), demonstrated that the essential oils (EOs) and extracts had a potent capacity to counteract detrimental free radicals, control the generation of reactive oxygen species, and mitigate oxidative damages. The antimicrobial activity of the Eos and extracts was carried out in a liquid medium against five strains (E. cloacae, K. pneumoniae, E. coli, S. aureus, and S. epidermidis) and four candidiasis (C. albicans, C. dubliniensis, C. tropicalis, and C. parapsilosis) and Aspergillus niger. The results showed the effectiveness of the EOs compared to the aqueous, ethanolic, and decoction extracts against most of the microorganisms tested. In addition, the ethanolic extract showed antifungal activity that was distinguished from that of the other extracts. The antimicrobial efficacy of the essential oils under study can primarily be attributed to the synergistic interactions among its three principal constituents (E-anethole, estragole, and fenchone). Furthermore, molecular docking and molecular dynamics simulation results reveal significant interactions and stability between the selected bioactive compounds and different target proteins involved in antimicrobial and antioxidant activities. Compounds like 3-hydroxyflavone, emmotin H, trans-caftaric acid, methyl rosmarinate, 1-caffeoyl-beta-D-glucose, and kaempferol exhibited better binding energies with the explored proteins, indicating their potential as antimicrobial and antioxidant agents. Finally, our findings emphasize the significance of A. graveolens seeds as a promising reservoir of advantageous health compounds that can serve as organic substitutes for the presently employed synthetic preservatives.

High performance enrichment and analysis of fluoroquinolones residues in environmental water using cobalt ion mediated paper-based molecularly imprinted polymer chips

BackgroundFluoroquinolones (FQs) are widely used for their excellent antimicrobial properties, yet their release into aquatic environments pose risks to ecosystems and public health. The accurate monitoring and analysis of FQs present challenges due to their low concentrations and the complex matrices found in actual environmental samples. To address the need for auto-pretreatment and on-line instrumental analysis, developing new microextraction materials and protocols is crucial. Such advancements will provide better analytical assurance for the effective extraction and determination of FQs at trace levels, which is of great significance to environmental protection and human health. ResultsIn this work, we presented a Co2+ mediated paper-based molecularly imprinted polymer chip (CMC@Co-MIP), combined with UPLC analysis, to develop an effective analytical method for identifying and quantifying trace amounts of ciprofloxacin (CIP) and enrofloxacin (ENR) in water samples. Notably, the addition of Co2+ in CMC@Co-MIP helped to capture the template molecule CIP through coordination before imprinting, which significantly improved the ordering of the imprinted cavities. CMC@Co-MIP exhibited a maximum adsorption capacity up to 500.20 mg g−1 with an imprinting factor of 4.12, surpassing previous reports by a significant margin. Furthermore, the enrichment mechanism was extensively analyzed by various characterization techniques. The developed method showed excellent repeatability and reproducibility (RSD<13.0%) with detection limits ranging from 0.15 to 0.21 μg L−1 and recoveries ranging from 64.9% to 102.3% in real spiked water samples. SignificanceWe developed a novel microextraction paper-based chip based on Co2+ mediation, which effectively improved the selectivity and convenience of extracting FQs. This breakthrough allowed the chip to have a high enrichment efficiency as well as provide a robust on-line instrumental program. It also confirms that the imprinting scheme based on metal ion coordination is a high-performance strategy.

Antimicrobial Activity of Formulated Origanum and Thyme Essential Oil Nanoemulsions - A Comparative Study

Introduction: This study focused on the formulation processing and antimicrobial activities of Origanum and Thyme essential oils (OEO) (TEO) and their nanoemulsions (OEON) (TEON) on gram-positive and gram-negative bacteria and yeast. Optimal nanoemulsion formulation and stability were achieved through balancing between requisite hydrophilic-lipophilic balance (rHLB) and surfactant concentration (Smix) of nanoemulsions. Methods: The smallest droplet sizes of OEON: (z -185.1 nm ± 0.85) and TEON (z -130.1 nm ± 0.60), were achieved by using 10 g/100 mL of OEO and TEO with 15 g/100 mL Smix at ultrasonication for 2 min with no phase separation. The size of nanoemulsion droplet and PDI was found to be influenced by HLB value, treatment time, and Smix concentration. Antimicrobial analyses, including a zone of inhibition, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and time-kill kinetics assay, were performed against Escherichia coli, Staphylococcus aureus, and Saccharomyces cerevisiae. Results: The antimicrobial findings demonstrated that OEO exhibited higher antimicrobial activity compared to TEO (P&lt;0.05). Meanwhile, the OEON and TEON substantially reduced the MIC and MBC values, compared to OEO and TEO against all tested microorganisms (P&lt;0.05). Throughout the time-kill assay, E. coli was reduced by 5 log CFU/ml within 120 minutes, while S. cerevisiae and S. aureus were eradicated after 60 and 120 minutes of incubation with OEON, respectively. Conclusion: In turn, TEON reduced E. coli by 5 log CFU/ml and S. cerevisiae by 4 log CFU/ml within 120 minutes, while S. aureus was inhibited within the same time of incubation with TEON. The nanoemulsion formulations of OEO and TEO considerably enhanced the antimicrobial properties, which provides a promising alternative plant-derived antimicrobial for pharmaceuticals and food applications.

Microstructural, mechanical, thermo‐rheological, barrier, and antimicrobial properties of coextruded tri‐layer polylactide/encapsulated geraniol/polylactide‐graphene nanoplatelets films

AbstractA sustainable polylactide (PLA)‐based multilayer food packaging film was developed to improve neat PLA films' modest mechanical, thermal, and water/gas barrier properties. To improve the desired properties and impart antimicrobial aspects to the composite films, graphene nanoplatelets (GNP), and geraniol (GER) were reinforced into single‐layered PLA films. The project aimed to assemble three monolayers into multilayer films (MLF) through a coextrusion process, keeping the PLA‐GER layer in the core. X‐ray diffractograms, micrographs, and roughness parameters of the films demonstrated the dispersion of GNP in the film. Thermogravimetric analysis confirmed an enhancement in the thermal stability of the MLF by around 8°C when compared against single‐layer PLA films. An improvement in mechanical rigidity was supported by tensile (&gt;87%) and rheological measurements. The polymers exhibit liquid‐like behavior in melts. Barrier properties did not improve for the MLF due to the agglomeration of GNP. The excellent antimicrobial properties of the MLFs for 3 weeks of storage at refrigerated conditions against both gram‐positive and gram‐negative pathogens were attributed to the release of GER from the film into the packed chicken samples and proved their potential for use in the food industry.

Chemical components and antibacterial activity of huajiao essential oils and its inhibitory mechanism against Pseudomonas putida

Pseudomonas putida is known to cause spoilage in edible mushrooms and fish. Huajiao essential oil (HEO), extracted from the pericarp of Huajiao, exhibits broad-range antimicrobial properties. This study investigated the chemical composition of HEO and its inhibitory effects and potential antimicrobial mechanism against P. putida. The major components of HEO were found to be linalool (33.65%), D-limonene (15.17%), and sabinene (14.22%). The minimum inhibitory concentration of HEO against P. putida was determined to be 10 mg/mL. Treatment with HEO resulted in intracellular substance leakage, compromised cell membrane integrity, increased membrane fluidity, and reduced cell viability. HEO also led to the accumulation of intracellular reactive oxygen species and inhibited metabolic enzyme activity. Additionally, electron microscopy revealed significant disruption of cell morphology. Molecular docking analysis suggested that linalool, D-limonene, and sabinene may inhibit genetic material replication and expression. These findings indicate that HEO can target multiple pathways to inhibit P. putida, making it a potential natural drug candidate against this bacterium.

Chitosan/rutin multifunctional hydrogel with tunable adhesion, anti-inflammatory and antibacterial properties for skin wound healing

Effective wound care remains a significant challenge due to the need for infection prevention, inflammation reduction, and minimal tissue damage during dressing changes. To tackle these issues, we have developed a multifunctional hydrogel (CHI/CPBA/RU), composed of chitosan (CHI) modified with 4-carboxyphenylboronic acid (CPBA) and the natural flavonoid, rutin (RU). This design endows the hydrogel with body temperature-responsive adhesion and low temperature-triggered detachment, thus enabling painless removal during dressing changes. The CHI/CPBA/RU hydrogels exhibit excellent biocompatibility, maintaining over 97 % viability of L929 cells. They also demonstrate potent intracellular free radical scavenging activity, with scavenging ratios ranging from 53 % to 70 %. Additionally, these hydrogels show anti-inflammatory effects by inhibiting pro-inflammatory cytokines (TNF-α, IL-6, and iNOS) and increasing anti-inflammatory markers (Arg1 and CD206) in RAW 264.7 macrophages. Notably, they possess robust antimicrobial properties, inhibiting over 99.9 % of the growth of Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus growth. In vivo testing on a murine full-thickness skin defect model shows that the hydrogel significantly accelerates wound healing by reducing inflammation, increasing collagen deposition, and promoting angiogenesis, achieving 98 % healing by day 10 compared to 78 % in the control group. These attributes make the polysaccharide-based hydrogel a promising material for advanced wound care.

Multifunctional skin dressings synthesized via one‐pot photopolymerization: Advancing wound healing and infection prevention strategies

AbstractIn the field of wound healing treatment, the development of new materials is essential to cover multiple functions, such as acceleration of the healing process, prevention of infection and response to stimuli, especially if they present lower costs or are easier to manufacture. These properties are of great importance to prompt skin cicatrization. In this work, new multifunctional skin dressings for wound healing and infection prevention are developed based on new hydrogel materials. The dressings are produced via a straightforward and environmentally friendly one‐pot photopolymerization manufacturing process utilizing vitamin B2 aqueous solutions as sensitizer, and energy‐efficient blue light sources. These dressings exhibit a high swelling capacity, pH and temperature responsiveness, biocompatibility, antimicrobial activity in the absence of conventional antibiotics, and are capable of promoting wound healing. The formulation is based on the combination of three monomers: 2‐((methacryloyloxy)ethyl)trimethylammonium chloride, methacrylic acid and N‐vinyl caprolactam. Collagen, hyaluronic acid, and essential oil of hop are added to enhance antimicrobial properties and stimulate regenerative cellular processes. In vivo experiments have demonstrated that pristine dressings are superior in promoting collagen and fibroblast regeneration and accelerating cicatrization as compared to dressings containing natural products. The dressing embedded with hop also displayed antimicrobial characteristics. The preparation and testing of these new efficient wound dressings are described. This study is distinctive in its integration of environmentally conscious manufacturing techniques with innovative material formulations, resulting in superior wound dressings that are both cost‐effective and highly functional. By achieving enhanced healing and infection prevention without the employment of conventional antibiotics, this work represents a substantial advancement in sustainable and effective wound care management.

Bacteriophages: Natural antimicrobial bioadditives for food preservation in active packaging

Developing innovative films and coatings is paramount for extending the shelf life of numerous food products and augmenting the barrier and antimicrobial properties of food packaging materials. Many synthetic chemicals used in active packaging and food storage have the potential to leach into food, posing long-term health risks. It is imperative for active packaging materials to inherently possess biological protective properties to ensure food quality and safety throughout its storage. Bacteriophages, or simply phages, are bacteria-eating viruses that serve as promising natural biocontrol agents and antimicrobial bioadditives in food packaging materials, specifically targeting bacterial foodborne pathogens. These phages are generally recognized as safe (GRAS) by regulatory authorities for food safety applications. They exhibit targeted action against various Gram-positive and -negative foodborne pathogens, including Bacillus spp., Campylobacter spp., Escherichia coli, Listeria monocytogenes, Salmonella spp., Shigella spp., and Vibrio spp., associated with foodborne spoilage and illness without affecting the beneficial microbes. Phage cocktails can be applied directly on food surfaces, incorporated into food packaging materials, or utilized during food processing treatments. Unlike chemical agents, phage activity increases proportionally with the rise in pathogenic bacterial populations. Researchers are exploring various packaging materials to deliver phages with broad host range, stability, and viability ensuring their effectiveness in safeguarding various food systems. The effectiveness of phage immobilization or encapsulation on active food packaging materials depends on various factors, including the characteristics of polymers, the choice of solvents, the type of phage, and its loading efficiency. Factors such as the orientation of phage immobilization on substrates, pH, temperature, exposure to carbohydrates and amino acids, exopolysaccharides, lipopolysaccharides, and metals can also influence phage activity. In this review, we comprehensively discuss the various active packaging systems utilizing bacteriophages as natural biocontrols and antimicrobial bioadditives to reduce the incidence of foodborne illness and enhance consumer confidence in the safety of food products.

In Ukrainian

Due to the variety of their forms and properties, silver nanoparticles (AgNPs) are promising for obtaining nanomaterials with various functional applications. Today, regardless of the method of obtaining AgNPs, there is a problem of stabilizing their surface to prevent aggregation, which significantly reduces their activity and prevents uniform distribution during the preparation of nanomaterials. The aim of this work was the synthesis of silver nanoparticles using an oligomeric ionic liquid (OIL) and the study of their structure and antimicrobial properties. In this work, for the first time, an anionic OIL with a hyperbranched structure developed by us was used as a surface stabilizer in the synthesis of AgNPs. The synthesis of AgNPs was carried out by the reduction of Ag ions in the composition of AgNO3 with trisodium citrate in the presence of this OIL. Using the methods ofUV-vis and FTIR spectroscopy, X-ray analysis, electron microscopy and the disc-diffusion method, the peculiarities of the structural organization of AgNPs and their antimicrobial properties were studied. UV-visible spectroscopy data indicate the formation of silver nanoparticles and their spherical or quasi-spherical shape. It was found that there are adsorbed ionic and carbonyl groups on the surface of the formed AgNPs, and the formation of host-guest complexes between OIL and silver ions was revealed using FTIR. The formation of AgNPs and complexes between OIL and silver ions is also confirmed by X-ray diffraction. According to electron microscopy, the size of the synthesized nanoparticles varies from 5 to 16 nm, with an average value of 10.2 nm. This average value is very close to the value of 9.3 nm obtained from the results of X-ray analysis. The synthesized silver nanoparticles showed a very high antimicrobial activity against C. albicans fungi, while the width of the inhibition zone (d) was 34 mm. Also, the AgNPs powder shows very high activity against gram-positive bacteria S. aureus (d = 30 mm) and gram-negative bacteria E. coli (d = 12 mm). The approach developed by us to the synthesis of AgNPs in the presence of OIL as a surface stabilizer with certain functionalization of the latter opens up new opportunities in the synthesis of AgNPs and the preparation of highly dispersed related systems, including functionalized nanocomposite polymer materials with antimicrobial properties.

Identification of Dominant Bacteria from Crowded Places of Vellore by using MIC and ABST Analysis

The purpose of this study is to understand the antimicrobial effect of spices and leaf extracts against prominent bacteria present in crowded localities. It has been shown that spices offer therapeutic benefits, particularly antimicrobial action. In addition to being food preservatives, they are employed as household medications. In this work, agar well diffusion method is used to compare the susceptibility of a few human pathogenic bacteria to different spice extracts. The extracts were prepared using 70% ethyl alcohol. The samples for the pathogenic bacteria were collected from crowded places situated in Vellore, Tamil Nadu. The antimicrobial properties of bilva, lemon leaves, mehndi, cinnamon, and hibiscus leaves were found to be comparatively higher than those of the other spices and leaf extracts examined. Of all the spices, ethanol extracts from cinnamon had the strongest antimicrobial properties. It has been discovered that Gram negative bacteria are more susceptible to leaf extracts and spices than Gram positive bacteria. The potential application of spices as antimicrobial agents is quite high. Key Words: spices, leaf extracts, antimicrobial activity, ethanol extract, MIC, ABST

Design Synthesis and Spectral Characterization of Novel Morpholine ring fused with Substituted Pyrazoline Derivatives as Promising Anticancer, Antimicrobial Activity of in vitro and in silico studies

A search for new anticancer agents has prompted the design and synthesis of new novel morpholine ring fused with substituted pyrazoline derivatives MCP 1-4 as potent anticancer agents. MCP compounds were synthesized and the compounds structures were elucidated using elemental analysis and spectroscopic techniques like FT-IR, 1H NMR and 13C NMR. MCP derivatives binding affinities values were predicted by Auto Dock version, which shows the MCP derivatives as good anticancer 1OQA protein and antimicrobial properties, bacterial protein 1UAG and 5KEE with good binding affinity values from -6.2 to -6.5 kcal/mole and -7.6 to -8.9 kcal/ mole respectively. Among the four MCP compounds, the compounds MCP-1,3 and 4 have the similar binding interaction values of 6.5 kcal/mole. The MCP derivatives have good virus inhibition activity and these compounds are docked with SARS COVID 19 CORONA virus protein 6LU7 to have the docking score values -7.4 to 7-7.6 kcal/ mole. In silico ADME predictions were carried for the synthesized MCP 1-4 derivatives by online tool Swissadme. MCP derivatives have the good log p value of &lt;5. MCP derivatives were also evaluated by antimicrobial activity, the compound MCP-3 showed zone of inhibition values on all the sixteen bacterial cell lines. The compound MCP-3 was subjected to anticancer screening on MCF-7 cell line, the compound showed the good IC50 value.