Antimicrobial Activity Research Articles

Newly synthesized surfactants as antimicrobial and anti-adhesion agents

Quaternary ammonium salts (QAS) are widely used in medicine, industry and agriculture as disinfectants, biocides, and fungicides. QAS have the ability to coat various surfaces, prevent adhesion of microorganisms to them and inhibit the formation of biofilm. A group of surfactants derived from benzoic acid with different chemical structures was tested: monomeric QAS with different alkyl chain lengths (C12, C14, C16), gemini QAS containing 12-carbon alkyl chains and linkers of various lengths (3,4,6 methylene groups), as well as multifunctional QAS. Among the tested surfactants, monomeric QAS showed the highest bactericidal and fungicidal activity. All three groups of tested compounds inhibited the filamentation of C. albicans. The best antimicrobial activity was demonstrated by the monomeric surfactant C12AA, while the multifunctional equivalent (2xC12AA) was characterized by good anti-adhesive activity. All tested compounds are non-mutagenic and cause low hemolysis of sheep erythrocytes. Multifunctional and gemini surfactants are also non-toxic.

L-PTMI-co-L-PEI copolymers obtained through copolymerization of cyclic imino ethers and their chain modification: Antibacterial properties and cytotoxicity

Polymeric antimicrobial agents are intensively investigated as potential novel antibiotics. In this work we use copolymerization of 2-propyl-2-oxazine (PrOzi) and 2-methyl-2-oxazoline (MeOx) combined with hydrolysis of the polymer side chains as a tool to obtain various linear polymeric derivatives of polytrimethylenimines (L-PTMI) and polyethylenimine (L-PEI). To obtain well-defined polymers, initially we determined copolymerization rates, and subsequently, we investigated the hydrolytic rates of various repeating units, namely PrOzi, MeOx, and 2-methyl-2-oxazine (MeOzi) in both homo- and copolymers. We observed that the structure of the polymeric main chain significantly influences the rate of acidic hydrolysis. In particular, the protonated L–PEI repeating unit (r.u.) accelerates the hydrolytic cleavage of the amide bond more than the protonated L-PTMI r.u., due to the shorter distance between amine centers.The biological activity of the polymers was assessed against three model microorganisms, namely Escherichia coli, Staphylococcus aureus and Candida albicans, and benchmarked in toxicity test against human lung fibroblast cell line. The antibacterial activity of L-PTMI-co-L–PEI increases monotonically with the increasing content of PTMI r.u., indicating an additive effect of covalently bonded L-PTMI and L-PEI. The antimicrobial activity of the copolymers is almost identical to that of the tested polymer blends in the corresponding ratios.The introduction of up to 40 % of PrOzi r.u. into the polyamine structure of PTMI (PPrOzi–co-L-PTMI copolymer) does not decrease the antimicrobial activity, compared to L–PTMI. The molecule remains active, particularly against Staphylococcus aureus (MIC = 4 μg/mL). At the same time, the presence of amide r.u. reduces toxicity. The highest observable selectivity index can reach values as high as 20 (PPrOzi40%–co-L-PTMI60%)

Highly Efficient Bimetallic Catalyst for the Synthesis of N-substituted Decahydroacridine-1,8-diones and Xanthene-1,8-diones: Evaluation of their Biological Activity

Background: Bimetallic catalysis plays a major role in boosting the catalytic performance of monometallic counterparts due to the synergetic effect. Method and Materials: In the present study, we have exploited ZrCl4:Mg(ClO4)2 as an efficient bimetallic catalyst for the synthesis of a few biologically relevant N-substituted decahydroacridine-1,8-diones and xanthene-1,8-diones under solvent-free conditions. The complete characterization data (XRD, SEM, BET, pH, TGA, and IR) of the bimetallic catalyst, ZrCl4: Mg(ClO4)2, are provided in the supporting information. Results: Among the compounds screened for anti-oxidant and anti-microbial activities, the acridine derivatives with chloro and fluoro substitutions (compounds 4b, 4c, 4d, and 4j) have exhibited potent activities when compared to other compounds. Among the xanthene derivatives screened for anti-oxidant activity, compounds 5c, 5i, and 5j with chloro and nitro derivatives exhibited potent antioxidant activity, and the rest all showed moderately potent activity. Conclusion: Among the compounds screened for antibacterial activity, compound 5j with chloro substitution showed potent activity, followed by compounds 5c, 5d, 5h, and 5i against Gram +ve bacteria, and compounds 5h, 5f, and 5g with N,N-dimethyl, methoxy and hydroxy substitutions have shown potent activity against Gram -ve bacteria.

Chitosan catechol-tannic acid composite hydrogel and cryogel with antimicrobial and hemostatic properties

Hydrogels containing catechol group have received attention in the biomedical field due to their robust adhesive/cohesive capabilities, biocompatibility, and hemostatic abilities. Catechol-functionalized chitosan holds promise for preparing self-assembly hydrogels. However, issues of inefficient gelation and instability still persist in these hydrogels. In the current study, we synthesized chitosan catechol (CC) of high catechol substitution (~28 %) and combined CC with tannic acid (TA, which also contains catechol) to form self-healing CC-TA hydrogels. The catechol-enriched CC-TA composite hydrogels showed rapid gelation and mechanical reinforcement (shear modulus ~110 Pa). In situ coherent small-angle X-ray scattering (SAXS) coupled with rheometry revealed a morphological feature of mesoscale clusters (~20 nm) within CC-TA hydrogel. The clusters underwent dynamic destruction under large-amplitude oscillatory shear, corresponding with the strain-dependent and self-healing behavior of the CC-TA hydrogel. The composite hydrogel had osmotic-responsive and notable adhesive properties. Meanwhile, CC-TA composite cryogel prepared simply through freeze-thawing procedures exhibited distinctive macroporous structure (~200 μm), high water swelling ratio (~7000 %), and favorable compressive modulus (~8 kPa). The sponge-like cryogel was fabricated into swabs, demonstrating hemostatic capacity. The CC-TA composites, in both hydrogel and cryogel forms, possessed ROS scavenging ability, antimicrobial activity, and cell compatibility with potentials in biological applications.

Influence of seasonality and habitat on chemical composition, cytotoxicity and antimicrobial properties of the Libidibia ferrea

Libidibia ferrea Mart, belonging to the Fabacee family, is a medicinal plant known for its biological properties and production of phenolic compounds. Previous studies reveal the biological activity of its phenolic constituents, making it very promising for the development of new medicines. Seasonality and geographic distribution of species can modify the production of secondary metabolites in Fabaceae species in terms of the preferentially activated metabolic pathways and, consequently, interfere with the medicinal properties of these species. Studying the influence of seasonality on the production of phenolic constituents is essential to establish conditions for “cultivation,” species collection, standardization, production, and safety in traditional medicine. This unprecedented study proposed to evaluate the influence of seasonal variations and habitat on the production of phenolic compounds and biological properties of the ethanolic extracts of the stem bark from L. ferrea, whose specimens were collected from the Caatinga and the Atlantic Forest, biomes of Brazil. Antimicrobial activity was determined by broth microdilution. Cytotoxicity was evaluated through a colorimetric assay using MTT. ABTS and DPPH radical reduction methods estimated antioxidant capacities. Folin-Ciocalteu and AlCl3 spectrophotometric methods quantified total phenolics and flavonoids, respectively. In turn, radial diffusion quantified tannin content. PCA score plot and HCA dendogram were obtained by multivariate analysis of 1H NMR data. The cytotoxicity against C6 glioma cells was observed only for Atlantic Forest extracts (EC50 = 0.13–0.5 mg mL−1). These extracts also showed selectivity against Gram-positive bacteria Bacillus subtilis (ATCC 6633) [MICs 500–2000 μg mL−1], B. cereus CCT 0096) [MIC = 250 μg mL−1], Staphylococcus aureus (ATCC 6538) [MICs = 250–500 μg mL−1], S. epidermidis (ATCC 12228) [62.5–1000 μg mL−1], mainly to Staphylococcus sp. Caatinga extracts showed higher production of flavonoids and antioxidants in the summer [7.36 ± 0.19 μg QE mg−1 extract; IC50ABTS = 4.86 ± 0.05 μg mL−1], spring [5.96 ± 0.10 μg QE mg−1 extract; IC50ABTS = 5.96 ± 0.08 μg mL−1 ], winter [4.89 ± 0.25 μg QE mg−1 extract; IC50ABTS = 6.72 ± 0.08 μg mL−1 ]. Regarding habitat, two discriminating compound patterns in the studied biomes were revealed by NMR. The results indicated that the Caatinga biome offers better conditions for activating the production of phenolics [336.34 ± 18.1 μgGAE mg−1 extract], tannins [328.38 ± 30.19 μgTAE mg−1 extract] in the summer and flavonoids in winter, spring, and summer. The extracts that showed the best antioxidant activities were also those from the Caatinga. In turn, extracts from the Atlantic Forest are more promising for discovering antibacterial compounds against Staphylococcus sp and cytotoxic for C6 glioma cells. These findings corroborated the traditional use of L. ferrea bark powder for treating skin wounds and suggest the cytotoxic potential of these extracts for glioblastoma cell lines.

Traditional Uses, Phytochemical Constituents and Ethnopharmacological Properties of Mistletoe from Phoradendron and Viscum Species.

Plants from the genus Phoradendron and Viscum, also known as American and European mistletoe, are a group of hemiparasitic plants traditionally used to treat many diseases. Mistletoes have a rich content of natural compounds like terpenes, alkaloids, proteins, and phenolic compounds associated with their potential medicinal properties. In this sense, mistletoes have shown antiproliferative, antioxidant, anti-inflammatory, and antimicrobial activity, which has been attributed to their phytochemical constituents. The mechanisms in which mistletoe plants act vary and depend on their phytochemical content and distribution, which in part will depend on the mistletoe species. In this sense, recent literature research is needed to visualize state of the art in the ethnopharmacological potential of mistletoe. Thus, this literature review aims to systematically report recent studies (2010-2023) on the phytochemical characterization and bioactive studies of mistletoe plants, mainly the Viscum and Phoradendron genera. We gather recent information of 161 references selected in our research. Here we report that although there are several bioactivity studies of mistletoe species, bioavailability studies are still scarce, and the precise mechanisms of action are not fully known. We encourage that further studies include a systematic strategy to cover these areas of opportunity.

Effect of Ginger (Zingiber officinale) Extracts on Mechanical and Antimicrobial Properties of Ganyong Starch Edible Films as Primary Packaging of Crabstick

Research has been conducted on the effect of ginger (Zingiber officinale) extract addition in the combination of an edible film made from Ganyong starch, sorbitol and chitosan. This study aims to analyze whether this formulation can be used as a substitute packaging for crabsticks that have been using conventional plastic packaging. By using a variation of ginger extract concentrations of 0, 3%, 6% and 9% into 3 % Ganyong starch, 4 % sorbitol and 0.3 % chitosan (w/v). Mechanical characteristics were carried out in the form of tensile strength, elongation, young modulus, swelling, moisture content, thickness, and solubility test. Antimicrobial ability and DSC (Differential scanning calorimetry) for the thermal properties of the casted film were also conducted. Data was analyzed using One-way Anova SPSS version 29 with Turkey’s test. The addition of ginger extract to edible films based on Ganyong starch, sorbitol and chitosan can be used as primary packaging for crabsticks. The best formulation was found in the 6 % ginger extract variation with the results of swelling (95 %), moisture content (13 %), elongation (76 %), and antimicrobial properties of Escherichia coli (7.5 mm) and Bacillus cereus (6.9 mm). In addition, the melting temperature (Tm) of 6 % ginger extract concentration was also higher (134 °C), yet was not significantly different from the other variations. Therefore, this formulation has the potential as an alternative primary crabstick packaging. HIGHLIGHTS Preparation of edible film from 3 % Ganyong starch, 4 % sorbitol, 0.3 % chitosan with fixed concentration and 3 different variations of ginger extract concentration (0, 3, 6, and 9 %), respectively. Casting method of edible film as primary packaging of crabsticks Mechanical properties and antimicrobial activity against Bacillus cereus and Escherichia coli, gram-positive and gram-negative bacteria, respectively The 6 % ginger extract variation showed better results with elongation (76 %), moisture content (13 %), swelling (95 %), and antimicrobial properties of coli (7.5 mm) and B. cereus (6.9 mm) GRAPHICAL ABSTRACT

Evaluation of antimicrobial activity in contaminated root canals and cytotoxicity of ozonized products: an ex-vivo study

Pulp and periapical diseases originate from microbial colonization of root canals. The development of new technologies and instrumentation techniques has provided more effective shaping of the root canal system. Even so, sodium hypochlorite and calcium hydroxide remain examples of auxiliary substances for endodontic treatment. Recently, ozone has emerged as promising in endodontic therapy. This study evaluated the antimicrobial activity of ozonized water and ozonized oils in root canals infected with Enterococcus faecalis, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans, in addition to the cytotoxicity of ozonized products. 224 human lower premolars were used, divided into 4 groups according to the microorganism tested, challenged with ozonized medications and compared to sodium hypochlorite and calcium hydroxide. The antimicrobial activities of ozonized oils were comparable to those established by sodium hypochlorite and calcium hydroxide. Ozonated sunflower oil and olive oil exhibited lower cytotoxicity and showed promise for understanding new metabolic routes and additional approaches in Endodontics.

Exploring chitosan-plant extract bilayer coatings: Advancements in active food packaging via polypropylene modification

UV-ozone activated polypropylene (PP) food films were subjected to a novel bilayer coating process involving primary or quaternary chitosan (CH/QCH) as the first layer and natural extracts from juniper needles (Juniperus oxycedrus; JUN) or blackberry leaves (Rubus fruticosus; BBL) as the second layer. This innovative approach aims to redefine active packaging (AP) development. Through a detailed analysis by surface characterization and bioactivity assessments (i.e., antioxidant and antimicrobial functionalities), we evaluated different coating combinations. Furthermore, we investigated the stability and barrier characteristics inherent in these coatings. The confirmed deposition, coupled with a comprehensive characterization of their composition and morphology, underscored the efficacy of the coatings. Our investigation included wettability assessment via contact angle (CA) measurements, X-ray photoelectron spectroscopy (XPS), and attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), which revealed substantial enhancements in surface concentrations of elements and functional groups of CH, QCH, JUN, and BBL. Scanning electron microscopy (SEM) unveiled the coatings' heterogeneity, while time-of-flight secondary ion mass spectrometry (ToF-SIMS) and CA profiling showed moderately compact bilayers on PP, providing active species on the hydrophilic surface, respectively. The coatings significantly reduced the oxygen permeability. Additionally, single-layer depositions of CH and QCH remained below the overall migration limit (OML). Remarkably, the coatings exhibited robust antioxidative properties due to plant extracts and exceptional antimicrobial activity against S. aureus, attributed to QCH. These findings underscore the pivotal role of film surface properties in governing bioactive characteristics and offer a promising pathway for enhancing food packaging functionality.

Comparative versatility and diverse biological applications of eco-friendly zinc oxide and cobalt oxide nanoparticles using Punica granatum L. peel extract

A fundamental element of nanotechnology today is the advancement of sustainable, environmentally friendly and economically viable approaches to green synthesis of nanomaterials. In this study, fresh aqueous extract of pomegranate peels was used as reducing and stabilizing agents in a rapid and eco-friendly approach for the synthesis of zinc oxide nanoparticles (ZnO-NPs) and cobalt oxide nanoparticles (Co3O4-NPs). X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission electron microscope (TEM), Energy Dispersive Analysis of X-rays (EDX), and Fourier-transform Infrared Spectroscopy (FT-IR) were used to analyze the biosynthesized ZnO-NPs and Co3O4-NPs. XRD analysis confirmed the crystalline structures of ZnO-NPs and Co3O4-NPs as approximately 33.4 and 11.9nm, respectively. SEM images showed distinct morphologies, while EDX and elemental mapping confirmed compositional integrity. FT-IR validated the characteristic functional groups present in both nanoparticles. TEM analysis provide the average particle size of ZnO-NPs and Co3O4-NPs were observed at 41.25 and 17.19nm, respectively. The zeta potential of green synthesized ZnO-NPs and Co3O4-NPs were found to have a distinct peak at -12.5 and -16.3mV, respectively. Both NPs have shown potent antimicrobial activity against four common pathogens, with increased antimicrobial activity against increasing concentrations of NPs. In vivo studies show a protective role for both ZnO-NPs and Co3O4-NPs against doxorubicin (DOX)-induced toxicity. In addition, Co3O4-NPs were effective against hepatotoxicity, nephrotoxicity, and endocrine disruption in male albino rats. Multi-technique investigation in this study offers a comprehensive understanding and indicates promising biological applications of ZnO-NPs and Co3O4-NPs.

Surface-silanized glass nanofibers and aluminate nanoparticles as reinforcing agents for acrylic emulsion toward multifunctional stimuli-responsive composite coatings

Smart waterborne coatings have shown various functions, such as afterglow photoluminescence, antimicrobial activity, water resistance, ultraviolet blocking, and anti-counterfeiting properties. However, photoluminescent organic agents have shown poor photostability and high cost. Additionally, waterborne acrylic coatings have shown poor mechanical properties. Herein, nanoparticles of rare-earth strontium aluminate (NRESA) and electrospun glass nanofibers (EGN) were used to strengthen the bulk of acrylic (ACR) coatings to develop smart products with mechanical reliability, hydrophobicity, ultraviolet blocking, and persistent photoluminescence. By physically integrating nano-scaled particles of RESA, colorless smart coatings of EGN@ACR were produced. Photoluminescence spectra showed that the transparent EGN@ACR changed its appearance to greenish when exposed to ultraviolet rays. Hybrids of EGN@ACR with trace amounts of NRESA showed fluorescence emission with instant reversibility. As the phosphor concentration in the EGN@ACR hybrids increased, afterglow photoluminescence with delayed reversibility was detected. When excited at 370 nm, the hybrid coatings displayed an emission band at 519 nm. The morphological analysis of NRESA by transmission electron microscopy (TEM) displayed diameters of 9-21 nm. After being prepared using electrospinning technology, glass nanofibers were introduced into acrylic emulsion coatings as a reinforcement agent. Scanning electron microscopic (SEM) analysis of EGN showed diameters of 70-120 nm. The smart coatings had better resistance to scratches as compared to the control sample of NRESA-free acrylic paint. A higher concentration of NRESA resulted in enhanced hydrophobicity and ultraviolet blocking.

Effect of carbon quantum dots doping on structural, optical, and antibacterial properties of barium tungstate nanocomposite material

Local bacterial infection remains an increasingly severe threat to human health worldwide, and infection control is still a challenging task. Carbon Quantum Dots (CQSs) and barium tungstate show antibacterial properties. CQDs doped Barium Tungstate (BaWO4) are synthesized by using a hydrothermal route and their optical and antimicrobial activities against the Gram-positive bacteria staphylococcus aureus and optical properties were investigated. The UV–Vis reveals a shift in the bandgap from 3.62 eV to 2.93 eV due to doping of CQDs in BaWO4. The structure of the CQDs/BaWO4 were studied by XRD, which shows CQDs doped BaWO4 samples possess tetragona4 werelite structure with the preferred orientation of (112) identified by XRD at 26° having crystallite size ∼ 31 nm. Nanocomposite BaWO4/CQDs exhibit a spherical-like shape and are composed of Ba, O, W and C according to the design of the experiment. Zeta sizer of CQDs by DLS shows the size of CQDs is 7.65 nm. The FT-IR shows the presence of functional groups in doped material like CC, CO, and COOH bonds which indicate that the C-dots are functionalized with epoxy, carbonyl, hydroxyl, and carboxylic acid groups. Their elemental composition and surface morphology were studied by EDS which shows the percentage variation of CQDs in BaWO4, SEM results show the change in shape of the sample by adding CQDs to BaWO4. The TEM image proves the presence of doped material in the BaWO4. The PL spectra reveals the emission spectra shift towards a higher wavelength and absorption increases. The qualitative analysis shows the antimicrobial activity and enlargement of the inhibition zone and quantitative analysis confirms it.

Effects of Electron Beam Radiation on the Phenolic Composition and Bioactive Properties of Olive Pomace Extracts

Olive pomace is an agro-industrial waste product generated from the olive oil industry and constituted by bioactive compounds with potential applications in several industrial sectors. The purpose of this work was to evaluate the effects of electron beam (e-beam) radiation on olive pomace, specifically on phenolic compounds (by HPLC–DAD–ESI/MS) and the bioactive properties (antioxidant, antiproliferative, and antimicrobial activities) of crude olive pomace (COP) and extracted olive pomace (EOP) extracts. The amount of total flavonoid content and the reducing power of COP extracts were higher than those obtained for EOP extracts. The results suggested that e-beam radiation at 6 kGy increased both total phenolic and total flavonoid contents as well as the reducing power of COP extracts, due to the higher extractability (>2.5-fold) of phenolic compounds from these samples, while decreasing the scavenging activity of extracts. The extracts of both olive pomaces showed antibacterial potential, and COP extracts at 400 µg/mL also presented antiproliferative activity against A549, Caco-2, 293T, and RAW264.7 cell lines, with both properties preserved with the e-beam treatment. All in all, e-beam radiation at 6 kGy appears to be a promising technology to valorize the pollutant wastes of the olive oil industry through enhancing phenolic extractability and bioactive properties, and, furthermore, to contribute to the environmental and economical sustainability of the olive oil industry.

Resazurin assay as a suitable method for testing the antimicrobial activity of photocatalytic surfaces

The antimicrobial activity of different types of photocatalytic surfaces (titania porous and nonporous phthalocyanine films) was tested using a resazurin assay. The gram-negative bacteria Escherichia coli was chosen as the model microorganism. A bacteria inoculum with a concentration of 1.75 × 106 CFU/ml was applied to hydrogel carriers and these were subsequently placed on the study surfaces. Half of the samples were kept in the dark and the other half were illuminated. After 4 h, the carriers were transferred to vials, resazurin added and the number of viable cells in the mixture counted. For nonporous surfaces, the effect of the addition of a biocide was investigated. The authors observed that as the amount of biocide in the layer increased, the proportion of viable cells in the samples kept in the dark decreased. These results are in good agreement with general assumptions. For the titania surfaces, the antimicrobial activity (characterized by ΔR) obtained through resazurin assay was compared to that obtained through the use of standard techniques. The final activity was very similar (the ΔR from the resazurin assay was 1.54 and the standard test gave a result of 1.56). The results confirm the reliability of the proposed method, and the use of carriers give us the possibility to test much larger installed surfaces without a need to cause damage to them.

Thymol, a Monoterpenoid within Polymeric Iodophor Formulations and Their Antimicrobial Activities.

Antimicrobial resistance (AMR) poses an emanating threat to humanity's future. The effectiveness of commonly used antibiotics against microbial infections is declining at an alarming rate. As a result, morbidity and mortality rates are soaring, particularly among immunocompromised populations. Exploring alternative solutions, such as medicinal plants and iodine, shows promise in combating resistant pathogens. Such antimicrobials could effectively inhibit microbial proliferation through synergistic combinations. In our study, we prepared a formulation consisting of Aloe barbadensis Miller (AV), Thymol, iodine (I2), and polyvinylpyrrolidone (PVP). Various analytical methods including SEM/EDS, UV-vis, Raman, FTIR, and XRD were carried out to verify the purity, composition, and morphology of AV-PVP-Thymol-I2. We evaluated the inhibitory effects of this formulation against 10 selected reference strains using impregnated sterile discs, surgical sutures, gauze bandages, surgical face masks, and KN95 masks. The antimicrobial properties of AV-PVP-Thymol-I2 were assessed through disc diffusion methods against 10 reference strains in comparison with two common antibiotics. The 25-month-old formulation exhibited slightly lower inhibitory zones, indicating changes in the sustained-iodine-release reservoir. Our findings confirm AV-PVP-Thymol-I2 as a potent antifungal and antibacterial agent against the reference strains, demonstrating particularly strong inhibitory action on surgical sutures, cotton bandages, and face masks. These results enable the potential use of the formulation AV-PVP-Thymol-I2 as a promising antimicrobial agent against wound infections and as a spray-on contact-killing agent.

Fabrication of Antimicrobial Hydrogel Using Biodegradable Blended Materials for Skin Applications

Biodegradable polymers are very useful polymers in biomedical applications. In this research, several hydrogels were fabricated by using two polymers, Polyvinyl alcohol (PVA) and Chitosan (Chs) by the solvent casting method in order to use them for skin applications. Several tests were carried out on these membranes such as Agar diffusion method to examine their antimicrobial activities, Fourier transform infrared microscopy (FTIR) test to study the differences in their chemical structures. Uniaxial tensile test was performed to examine the mechanical characteristics of these membranes. In addition, the wettability test was used to investigate the hydrophobicity or hydrophilicity of the surfaces. The results showed that all membranes are hydrophilic, of which the contact angles are less than 90°. The membrane manufactured from 75:25 Chs-PVA is more hydrophobic (contact angle is 74°) than other membranes made of 50:50 Chs-PVA and 25:75 Chs-PVA as the contact angles were 59° and 61°, respectively. The tensile test results indicate that the membrane fabricated of the PVA and the membrane that was fabricated by 75% Chs and 25% PVA has the highest tensile strength of 17.9 MPa, 16.2 MPa and Young^’ s Modulus of 181.2 MPa and 7.18 MPa, respectively. The highest strain at break was observed by the membrane of 25:75 Chs-PVA which equals to 24.67%. Chitosan membranes showed inhibition zones of about 2.99 cm and 2.75 cm in length, and 75:25 Chs-PVA membranes showed 5.1 and 5.91 cm in length for E.coli. To sum up, this copolymer is considered as promising hydrogel for skin applications such as wound dressing.

Facile synthesis of pyrimidine substituted-1,3,4-oxadiazole, 1,3,4-thiadiazole and 1,2,4-triazole derivatives and their antimicrobial activity correlated with molecular docking studies

Organosilicon reagent-trimethylsilyl isothiocyanate, a common reagent for the development of 1,3,4-oxadiazoles, 1,3,4-thiadiazoles and 1,2,4-triazoles was reported by the reaction with heteroaromatic acid hydrazides under conventional and ultrasonication methodologies in a polar protic solvent, ethanol under appropriate conditions. Molecular docking studies were performed with the X-ray crystal structures of the target molecules (PDB ID: 2w9s and PDB ID: 6f0e). The docking results indicated that H-bond interactions and hydrophobic interactions were responsible for the inhibition of protein. All 15 synthesized molecules showed excellent binding energy than the standard drugs. The compounds 3a, 3b, 3e, 5a, 5b, 5e and 7a exhibited low MIC values against S. aureus whereas 3a, 3b, 5a, 5b and 7a against B. subtilis. The compounds 5a, and 5b also displayed low MIC values against P. aeruginosa. The MBC of these compounds is 2×MIC, and is equal to standard drug, Chloramphenicol. The compounds 3a, 3b, 3e, 5a, 5b, 5d and 5e showed low MIC values against A. niger whereas 3a, 5a, 5b, 7a, 7b and 7e against P. Chrysogenum. The MFC is 2×MIC and is equal to standard drug, Fluconazole. The structure-activity relationship of the compounds revealed that unsubstituted, methyl and nitro substituted compounds showed greater antimicrobial activity than those with chloro and bromo substituents.▪

Physical, antimicrobial, and release profiles of orthodontic adhesives modified with chlorhexidine and cetylpyridinium chloride

The aim of the present study was to evaluate the properties (physical, antimicrobial, and release profiles) by using modified orthodontic adhesives on extracted teeth. Three primers, Transbond (Tx), Transbond-Chlorhexidine (Tx-CHx), and Transbond-Cetylpyridinium chloride (Tx-CTP), containing antibacterial agents CHx and CTP, were tested against Streptococcus mutans (Sm) in planktonic and biofilm phases. Their antimicrobial activities (biofilm and growth assays), affected by water aging, were analyzed along with shear bond strength and mode of fracture after bonding brackets onto bovine incisors. Tx-CHx demonstrated superior antimicrobial activity against in both planktonic and biofilm states, completely inhibiting their growth and biofilm formation. This effectiveness persisted after thermocycling. Conversely, Tx-CTP showed a positive outcome against microbial activity compared to Tx. Shear bond strength (SBS) (Tx–11.21±1.72; Tx-CTP–12.48±2.50; Tx-CHx–11.57±2.28) and bond failure interface showed no significant differences among the three primers. Adding CHx and CTP to an orthodontic primer could potentially safeguard enamel from demineralization without negatively impacting its structural characteristics.

Tissue engineered multifunctional chitosan-modified polypropylene hernia mesh loaded with bioactive phyto-extracts

Surface modified tissue engineered polypropylene / PP hernia meshes were fabricated by incorporating Bacterial cellulose / BC and chitosan / CS and phytochemical extracts. Under current practice, hernia and other traumatic injuries to the abdominal organs are clinically treated with surgical meshes. Often the foreign body reaction and infections result in relapse in patients which dictates additional reparative surgical procedures and pain. To improve the outcome of clinical restorative procedures new biomaterials with improved characteristics are required. The functionalized meshes were physically and chemically characterized using SEM, mechanical testing, FTIR and XRD. The antimicrobial activity was qualitatively and quantitatively tested using E. coli and S. aureus strains of bacteria. In vitro biocompatibility and wound healing effect of the modified meshes were performed using NIH3T3 fibroblast cell lines. Furthermore, tissue engineering potential of the meshes was evaluated using confocal fluorescent microscopy. In vivo implantation of the meshes was performed in male wistar rats for 21 days. Therefore, PP meshes with sustained drug delivery system augmented with anti-inflammatory and anti-microbial characteristics were developed. The coatings hereby not only increased the tensile strength of meshes but also prevented the modified meshes from causing infection. Current study resulted in CS-BC bioactive PP meshes loaded with phytochemicals which showed anti-inflammatory, antibacterial and wound healing potential. These meshes can be valuable to lessen the post-surgical complications of implanted PP mesh and thus reduce rejection and recurrence.

Anti-proliferative, antimicrobial, DFT calculations, and molecular docking 3D scaffold based on sodium alginate, chitosan, neomycin sulfate and hydroxyapatite

3D multifunctional scaffold has been designed based on Cs/SA/NS/NPHA. Nanoparticles hydroxyapatite (NPHA) was prepared via precipitation method of sodium dihydrogen phosphate in presence calcium chloride. Different ratios of Chitosan (CS)/Sodium Alginate (SA) were used to prepare Cs/SA scaffolds in presence of CaCl2 as a cross linker. NPHA was incorporated in CS/SA scaffold and neomycin sulfate (NS) was added as an antimicrobial agent. The structure and surface morphology of the scaffolds were investigated via infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and thermal gravimetric analysis (TGA) techniques. Additionally, Antimicrobial activity of the scaffold has evaluated against Gram- negative and Gram- positive bacteria. The result showed promising antimicrobial activity against Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and Candida albicans. Furthermore, cytotoxicity against MG63 osteosarcoma cell and fibroblast normal cell line has investigated. The result showed anti-proliferative against MG63. DFT calculations and molecular docking were used to study the reactivity of the compounds. The results exhibited that Cs/SA/NS/NPHA is potent expected to be used in bone tissue regeneration.