Anti-adhesive Properties Research Articles

Determining the potential use of biosurfactants in preventing endodontic infections.

Microbial biofilms play a dominant role in the failure of endodontic therapies. Bacterial adhesion is the first step in the establishment of biofilms, activating the host immune response leading to tissue damage. Biosurfactants are microbe-derived tensioactive molecules with latent anti-adhesive and anti-microbial activity. This study reports the extraction and characterization of a biosurfactant from Lactobacillus (L.) plantarum (Lp-BS) and investigates its anti-microbial and anti-adhesive properties compared to rhamnolipid, a commercially available biosurfactant. Lp-BS, extracted from L. plantarum during the growth phase, was characterized as a glycoprotein, able to reduce surface tension and emulsify non-polar liquids. Proteomic analysis of Lp-BS identified three bacterial adhesin-like proteins, suggesting roles in hindering bacterial adhesion. Lp-BS did not show significant anti-microbial activity against endodontic pathogens from the Streptococcus (Strep.) anginosus group or Enterococcus (Ent.) faecalis at 50mg/ml. However, anti-adhesive activity on abiotic surfaces was observed against both Strep. anginosus and Strep. intermedius. Rhamnolipid exhibited strong anti-microbial activity, with minimum inhibitory concentrations of 0.097mg/ml against Strep. anginosus, and 0.048mg/ml against Strep. constellatus and Strep. intermedius, in addition to a marked anti-adhesive activity. These findings offer preliminary evidence for the potential application of biosurfactants as an anti-microbial and/or anti-adhesive pharmacotherapy in endodontics.

Environment-friendly machining of aerospace-grade Ti alloy using SiAlON ceramic and AlTiN coated carbide inserts under sustainable biodegradable mist condition

Due to lower thermal conductivity and high chemical reactivity Ti6Al4V is considered as the difficult to machine aerospace material. To improve the machinability both AlTiN coated carbide and SiAlON ceramic tools are used for the machining under dry and biodegradable oil in water-based MQL mist mode. The anti-adhesion property of coated carbide tools has helped in reducing the cutting forces, and chip-tool contact during the machining of this alloy. The application of sustainable mist has also reduced the chipping of the cutting edge for the coated carbide tools. However, the SiAlON ceramic tools have underperformed in reducing the cutting forces and wear associated with the cutting insert due to their lower thermal conductivity. The implication of MQL mist was also not able to improve the performance of ceramic inserts during the cutting of Ti6Al4V alloy.

Charge-biased nanofibrous membranes with uniform charge distribution and hemocompatibility for enhanced selective adsorption of endotoxin from plasma

Endotoxin has been recognized as the crucial inducer for sepsis, and selective removal of endotoxin from plasma in vitro is the popular therapeutic strategy, such as hemoperfusion technology based on adsorption. Construction of hemoperfusion adsorbents with high endotoxin adsorption capacity in plasma is critical to meet the demands of hemoperfusion therapy for sepsis. However, it has proven to be challenging because of the adhesion of plasma protein. Inspired by the antiadhesion property of mixed-charge polymers and the endotoxin adsorption property of polyethyleneimine, here, a charge-bias, endotoxin selectively adsorbable and hemocompatible layer was constructed on nanofibrous surface of polysulfone (PSF) electrospun nanofibrous membrane (ENM) by the co-deposition of positively-charged polyethyleneimine (PEI) and negatively-charged polydopamine (PDA). The charge-bias degree of PEI/PDA co-deposition layer was quantified through zeta potential measurement, and firstly visualized through Kelvin probe force microscopy (KPFM) measurement. The continuity and integrity of PEI/PDA layer were characterized by XPS and TEM. We showed that the light positive charge-bias of the PEI/PDA layer in physiological environment (pH = 7.4) can macroscopically drove the adsorption selectivity towards endotoxins via electrostatic interaction, and uniformly distributed positive and negative charges can microscopically drove the anti-protein adhesion property. The resultant PEI/PDA@PSF ENM exhibited high adsorption capacity of 9049 EU/g in plasma, which is much higher than commercial endotoxin adsorbents. Notably, PEI/PDA@PSF ENM possessed satisfactory anti-plasma protein adhesion property, hemocompatibility and had no adverse effects on blood components, especially plasma protein. This work suggests a feasible approach for producing ENMs-based hemoperfusion adsorbent matrix for endotoxin-induced sepsis.

Biomimicking integrates peristome surface of Nepenthes alata onto biliary stents tips

Biliary stents (BS) play an important role in the field of modern interventional therapy. However, the surface of BS is easy to cause microbial attachment, which causes serious postoperative infections and threatens the life safety of patients. Here, inspired by the microstructures of Nepenthes alata’s peristome surface and Morpho menelaus, we presented an excellent slippery surface for BS tips by employing inverse opal colloidal crystals hydrogels. The inverse opal structure not only imparts a tunable structural color to the slippery surface but provides sufficient room for liquid absorption, such as lubricants and drugs. The slippery liquid-infused porous surfaces (SLIPS) endow the slippery surface with anti-adhesion and antibacterial properties. Due to the good temperature sensitivity of hydrogels, we can control the drug release by changing the temperature. In particular, the drug release process can be monitored through visually structural color variations. Furthermore, we also proposed a mechanism of droplet infiltration on SLIPS under the heating which is expected to be used for the smart transport of droplets. The multifunctional SLIPS BS tips also exhibit good generalization, we believe it will bring more possibilities for biliary stents.

Superhydrophobic PDMS/SiNPs/T-ZnOw coating with reduced adhesion of Streptococcus mutans for dental caries prevention

The prevention of dental caries is based mainly on killing the cariogenic bacteria Streptococcus mutans. Prevention of S. mutans adhesion through the development of physical structures is rarely utilized. In this study, a superhydrophobic PDMS/SiNPs/T-ZnOw (PST) coating was prepared for use on a bovine tooth by mixing polydimethylsiloxane (PDMS), silicon dioxide nanoparticles (SiNPs), and tetrapod-like zinc oxide whiskers (T-ZnOw) using one-pot solution and spray methods. The results showed that the superhydrophobicity and roughness of the coating, affected by the PDMS content, were positively correlated with the anti-adhesive effect on S. mutans. The PST coating with PDMS, SiNPs, and T-ZnOw at a ratio of 2.5:1:1 exhibited the highest water contact angle (161°) and the best anti-adhesion effect (97.2% at 4 h and 98.1% at 12 h). The anti-adhesion property towards S. mutans was attributed to its needle-like structure, and the biofilm live-dead staining test showed that the coating had no bactericidal effect. In addition, the coating exhibited favorable durability and biocompatibility, providing a solid foundation for application in the human oral cavity. Thus, this study provides an effective method for caries prevention.

Antimicrobial-free graphene nanocoating decreases fungal yeast-to-hyphal switching and maturation of cross-kingdom biofilms containing clinical and antibiotic-resistant bacteria

Candida albicans and methicillin-resistant Staphylococcus aureus (MRSA) synergize in cross-kingdom biofilms to increase the risk of mortality and morbidity due to high resistance to immune and antimicrobial defenses. Biomedical devices and implants made with titanium are vulnerable to infections that may demand their surgical removal from the infected sites. Graphene nanocoating (GN) has promising anti-adhesive properties against C. albicans. Thus, we hypothesized that GN could prevent fungal yeast-to-hyphal switching and the development of cross-kingdom biofilms. Herein, titanium (Control) was coated with high-quality GN (coverage > 99%). Thereafter, mixed-species biofilms (C. albicans combined with S. aureus or MRSA) were allowed to develop on GN and Control. There were significant reductions in the number of viable cells, metabolic activity, and biofilm biomass on GN compared with the Control (CFU counting, XTT reduction, and crystal violet assays). Also, biofilms on GN were sparse and fragmented, whereas the Control presented several bacterial cells co-aggregating with intertwined hyphal elements (confocal and scanning electronic microscopy). Finally, GN did not induce hemolysis, an essential characteristic for blood-contacting biomaterials and devices. Thus, GN significantly inhibited the formation and maturation of deadly cross-kingdom biofilms, which can be advantageous to avoid infection and surgical removal of infected devices.

Effect of Poly(Oxanorbonene)- and Poly(Methacrylate)-Based Polyzwitterionic Surface Coatings on Cell Adhesion and Gene Expression of Human Keratinocytes.

Polyzwitterions are generally known for their anti-adhesive properties, including resistance to protein and cell adhesion, and overall high bio-inertness. Yet there are a few polyzwitterions to which mammalian cells do adhere. To understand the structural features of this behavior, a panel of polyzwitterions with different functional groups and overall degrees of hydrophobicity is analyzed here, and their physical and biological properties are correlated to these structural differences. Cell adhesion is focused on, which is the basic requirement for cell viability, proliferation, and growth. With the here presented polyzwitterion panel, three different types of cell-surface interactions are observed: adhesion, slight attachment, and cell repellency. Using immunofluorescence methods, it is found that human keratinocytes (HaCaT) form focal adhesions on the cell-adhesive polyzwitterions, but not on the sample that has only slight cell attachment. Gene expression analysis indicates that HaCaT cells cultivated in the presence of a non-adhesive polyzwitterion have up-regulated inflammatory and apoptosis-related cell signaling pathways, while the gene expression of HaCaT cells grown on a cell-adhesive polyzwitterion does not differ from the gene expression of the growth control, and thus can be defined as fully cell-compatible.

Design, Synthesis, and Investigation of Novel Nitric Oxide (NO)-Releasing Aromatic Aldehydes as Drug Candidates for the Treatment of Sickle Cell Disease.

Sickle cell disease (SCD) is caused by a single-point mutation, and the ensuing deoxygenation-induced polymerization of sickle hemoglobin (HbS), and reduction in bioavailability of vascular nitric oxide (NO), contribute to the pathogenesis of the disease. In a proof-of-concept study, we successfully incorporated nitrate ester groups onto two previously studied potent antisickling aromatic aldehydes, TD7 and VZHE039, to form TD7-NO and VZHE039-NO hybrids, respectively. These compounds are stable in buffer but demonstrated the expected release of NO in whole blood in vitro and in mice. The more promising VZHE039-NO retained the functional and antisickling activities of the parent VZHE039 molecule. Moreover, VZHE039-NO, unlike VZHE039, significantly attenuated RBC adhesion to laminin, suggesting this compound has potential in vivo RBC anti-adhesion properties relevant to vaso-occlusive events. Crystallographic studies show that, as with VZHE039, VZHE039-NO also binds to liganded Hb to make similar protein interactions. The knowledge gained during these investigations provides a unique opportunity to generate a superior candidate drug in SCD with enhanced benefits.

Rim-differentiation vs. mixture of constitutional isomers: A binding study between pillar[5]arene-based glycoclusters and lectins from pathogenic bacteria

Macrocycle-based glycoclusters, on account of their promising anti-adhesive properties against bacteria, are potential therapeutic alternatives to classic antibiotics through the much less explored anti-adhesive strategy. In this study, a series of constitutionally-pure pentavalent glycoclusters was prepared by conjugating assorted azido-carbohydrates onto a penta-propargyl rim-differentiated pillar[5]arene (RD-P[5]) scaffold through Cu(I)-catalyzed azide–alkyne cycloaddition “click” reactions. Their binding towards therapeutically relevant bacterial lectins, such as LecA and LecB from Pseudomonas aeruginosa and concanavalin A (ConA), were evaluated subsequently by isothermal titration calorimetric studies. Most of these isomer-free RD-P[5] pentavalent glycoclusters, except the fucosylated ones, display good affinities to lectins. Nonetheless, the dissociation constants observed are similar to those displayed by an analogous pentavalent glycocluster consisting of four P[5] constitutional isomers, in which the RD-P[5] component merely accounts for 7% in the mixture. Our results revealed that high constitutional purity is not essential for achieving effective multivalent interactions between P[5]-based glycoclusters and lectins, presumably as a result of the conformationally labile nature of the P[5] scaffold. This information provides valuable design principles for low-cost and facile syntheses of glycosylated P[5]s for biomedical applications.

Antibacterial Adhesion Strategy for Dental Titanium Implant Surfaces: From Mechanisms to Application.

Dental implants are widely used to restore missing teeth because of their stability and comfort characteristics. Peri-implant infection may lead to implant failure and other profound consequences. It is believed that peri-implantitis is closely related to the formation of biofilms, which are difficult to remove once formed. Therefore, endowing titanium implants with anti-adhesion properties is an effective method to prevent peri-implant infection. Moreover, anti-adhesion strategies for titanium implant surfaces are critical steps for resisting bacterial adherence. This article reviews the process of bacterial adhesion, the material properties that may affect the process, and the anti-adhesion strategies that have been proven effective and promising in practice. This article intends to be a reference for further improvement of the antibacterial adhesion strategy in clinical application and for related research on titanium implant surfaces.

Bioinspired Screening of Anti-Adhesion Peptides against Blood Proteins for Intravenous Delivery of Nanomaterials.

Nanomaterials (NMs) inevitably adsorb proteins in blood and form "protein corona" upon intravenous administration as drug carriers, potentially changing the biological properties and intended functions. Inspired by anti-adhesion properties of natural proteins, herein, we employed the one-bead one-compound (OBOC) combinatorial peptide library method to screen anti-adhesion peptides (AAPs) against proteins. The library beads displaying random peptides were screened with three fluorescent-labeled plasma proteins. The nonfluorescence beads, presumed to have anti-adhesion property against the proteins, were isolated for sequence determination. These identified AAPs were coated on gold nanorods (GNRs), enabling significant extension of the blood circulating half-life of these GNRs in mice to 37.8 h, much longer than that (26.6 h) of PEG-coated GNRs. In addition, such AAP coating was found to alter the biodistribution profile of GNRs in mice. The bioinspired screening strategy and resulting peptides show great potential for enhancing the delivery efficiency and targeting ability of NMs.

Biocompatibility of Zinc Matrix Biodegradable Composites Reinforced by Graphene Nanosheets.

As a new type of biodegradable implant material, zinc matrix composites have excellent potential in the application of biodegradable implants because of their better corrosion resistance than magnesium matrix materials. Our previous studies have shown that graphene nanosheet reinforced zinc matrix composites (Zn-GNS) prepared by spark plasma sintering (SPS) have good mechanical properties and suitable degradation rate. However, the biocompatibility of zinc matrix composites is still a problem of concern. The cytocompatibility and blood compatibility of pure zinc and Zn-GNS composites in vitro were studied. The results showed that Zn-GNS composites had acceptable toxicity to MG-63 human osteosarcoma cells. In addition, the hemolysis rate of pure zinc and its composites were less than 3%, which has no adverse effect on adhered platelets, and has good antithrombotic and antiadhesion platelets properties. In conclusion, the addition of GNS did not adversely affect the biocompatibility of Zn-GNS composites, which indicated that Zn-GNS composites are a promising candidate for bone implantation.

Interaction between honeybee mandibles and propolis.

In a biomimetic top-down process, challenging the problem of resin deposition on woodworking machine tools, an adequate biological model was sought, which hypothetically could have developed evolutionary anti-adhesive strategies. The honeybee (Apis mellifera) was identified as an analogue model since it collects and processes propolis, which largely consists of collected tree resin. Propolis is a sticky substance used by bees to seal their hive and protect the colony against pathogens. In spite of its stickiness, honeybees are able to handle and manipulate propolis with their mandibles. We wanted to know if beneficial anti-adhesive properties of bee mandibles reduce propolis adhesion. The anatomy of bee mandibles was studied in a (cryo-)scanning electron microscope. Adhesion experiments were performed with propolis on bee mandibles to find out if bee mandibles have anti-adhesive properties that enable bees to handle the sticky material. A scale-like pattern was found on the inside of the mandible. Fresh mandibles were covered with a seemingly fluid substance that was at least partially removed during the washing process. Propolis adhesion on bee mandibles was measured to be 1 J/m2 and was indeed significantly lower compared to five technical materials. Propolis adhesion was higher on mandibles that were washed compared to fresh, unwashed mandibles. Results indicate that the medial surface of the mandible is covered with a fluid substance that reduces propolis adhesion. First results suggested that the surface pattern does do not have a direct effect on propolis adhesion.

Arterial hypertension as a consequence of endothelial glycocalyx dysfunction: a modern view of the problem of cardiovascular diseases

Arterial hypertension (AH) is a leading risk factor for the development of cardiovascular, cerebrovascular, and renal diseases, which are among the top 10 most common causes of death in the world. The etiology of hypertension has not been fully elucidated, but it has been established that endothelial dysfunction is the most significant pathogenetic link in the formation and progression of the disease. The data obtained in the last 10-15 years on endothelial glycocalyx (eGC) studies indicate that endothelial dysfunction is preceded by destabilization and shedding of eGC with the appearance of its soluble components in the blood, which is equivalent to a process that can be designated as eGC dysfunction. Signs of eGC dysfunction are expressed in the development of hypertension, diseases of the cardiovascular system, and their complications. The purpose of this review is to analyze and substantiate the pathophysiological role of eGC dysfunction in hypertension and cardiovascular diseases and to describe approaches for its assessment and pharmacological correction. Abstracts and full-size articles of 425 publications in Pubmed/MEDLINE databases over 20 years were studied. The review discusses the role of eGC in the regulation of vascular tone, endothelial barrier function, and anti-adhesive properties of eGC. Modifications of eGC under the influence of pro-inflammatory stimuli, changes in eGC with age, and with increased salt load are considered. The aspect associated with eGC dysfunction in atherosclerosis, hyperglycemia and hypertension is covered. Assessment of eGC dysfunction is difficult but can be performed by indirect methods, in particular by detecting eGC components in blood. A brief description of the main approaches to pharmacoprevention and pharmacocorrection of hypertension is given from the position of exposure effects on eGC, which currently has more a fundamental than practical orientation. This opens up great opportunities for clinical studies of eGC dysfunction for the prevention and treatment of hypertension and justifies a new direction in the clinical pharmacology of antihypertensive drugs.

Injectable adhesive self-healing biocompatible hydrogel for haemostasis, wound healing, and postoperative tissue adhesion prevention in nephron-sparing surgery

Nephron-sparing surgery is a well-established treatment in patients with T1a renal cell carcinoma; however, the complex suturing process prolongs warm ischaemia time, affects the preservation of normal renal parenchymal function, and causes avoidable postoperative tissue adhesion complications, including chronic abdominal pain, intestinal obstruction, and female infertility. Hence, the design of multifunctional biomaterials with haemostasis, postoperative wound management, and postoperative tissue adhesion prevention properties for nephron-sparing surgeries is urgently needed. In this study, a series of injectable adhesive multifunctional biocompatible hydrogels were designed based on the free-radical polymerisation of monomers acryloyl-6-aminocaproic acid (AA) and N-acryloyl 2-glycine (NAG), and the ionic coordination between Ca2+ and the abundant carboxyl groups in AA and NAG. AA/NAG/Ca (AA, NAG, and Ca refer to acryloyl-6-aminocaproic acid, N-acryloyl 2-glycine and calcium chloride, respectively) hydrogel exhibited good mechanical properties, swelling and adhesion properties, flexibility, in vitro blood-clotting ability, and cytocompatibility. In vivo experiments on liver injury models and rat/rabbit nephron-sparing surgery models elucidated that the AA/NAG/Ca hydrogel had haemostasis performance and wound healing properties that led to short bleeding time, reduced bleeding volume, and well-organised nephron structures. An abdomen-caecum adhesion model indicated that the AA/NAG/Ca hydrogel showed excellent anti-adhesion properties. In summary, this multifunctional hydrogel exhibited potential for improving haemostasis and wound management in nephron-sparing surgeries, showing potential for clinical application. Statement of significanceExtended warm ischemia time during nephron sparing surgery negatively affected postoperative renal function due to the need for hemostasis at the wound with abundant blood supply, and postoperative wound healing and additional adhesions caused by the surgical procedure deserve attention. Based on the efficient and stable adhesion properties of hydrogels and the ability to promote wound healing. Herein, a series of adhesive self-healing biocompatible hydrogels were prepared based on free-radical polymerization of acryloyl-6-aminocaproic acid (AA) and N-acryloyl 2-glycine (NAG) and the ionic coordination between Ca2+ with the abundant carboxyl groups in AA and NAG. AA/NAG/Ca hydrogel showed hemostasis property in nephron sparing surgery model, promote kidney wound healing, and could perform anti-postoperative adhesion efficacy in an abdomen-caecum adhesion model.

Dual-functionalized titanium by ultrafast laser texturing to enhance human gingival fibroblasts adhesion and minimize Porphyromonas gingivalis colonization

Dental implant failure is primarily due to peri-implantitis, a consequence of bacterial penetration causing implant loosening. Beyond supporting the implant, the adhesion of gingival tissues to the surface is essential for its role as a physical barrier to bacteria. Surface nanotextures are widely known to affect wettability, protein adsorption, and cellular and/or bacterial adhesion. In this report, a femtosecond laser (fs-L) was used to design Laser-Induced Periodic Surface Structures (LIPSS) with Infra-Red (IR) or Green lasers on Ti6Al4V. Surface morphology, topography and wettability were characterized. Gingival fibroblasts adhesion was evaluated with sclerometer scratch tests and confirmed by ultrasonic bath cell detachment method. The fs-L texturing increases human gingival cells adhesion compared to polished surface. The adhesion of peri-implantitis associated bacteria was quantified. After 48 h of contact, IR LIPSS show antiadhesive properties for Porphyromonas gingivalis, whereas Green LIPSS, thanks to its smaller spatial period, have limited both Streptococcus mutans and Porphyromonas gingivalis adhesion. Thus, LIPSS generated on Ti6Al4V surfaces, especially Green LIPSS, are identified as having double biological functionality: repellent for bacteria and adhesive for gingival tissues. This study proves that fs-L processing is an innovative tool with potential to enhance implant success paving the way towards dual functionality.

Erythrocyte interaction with titanium nanostructured surfaces

Titanium and its alloys are used to make different medical devices such as stents, artificial heart valves, and catheters for cardiovascular diseases due to their superior biocompatibility. Thrombus formation begins on the surface of these devices as soon as they encounter blood. This leads to the formation of blood clots, which obstructs the flow of blood that leads to severe complications. Recent advancements in nanoscale fabrication and superhydrophobic surface modification techniques have demonstrated that these surfaces have antiadhesive properties and the ability to reduce thrombosis. In this study, the interaction of erythrocytes and whole blood clotting kinetics on superhydrophobic titanium nanostructured surfaces was investigated. These surfaces were characterized for their wettability (contact angle), surface morphology and topography (scanning electron microscopy (SEM)), and crystallinity (glancing angled X-ray diffraction (GAXRD)). Erythrocyte morphology on different surfaces was characterized using SEM, and overall cell viability was demonstrated through fluorescence microscopy. The hemocompatibility of these surfaces was characterized using commercially available assays: thrombin generation assay thrombin generation, hemolytic assay hemolysis, and complement convertase assay complement activity. The results indicate that superhydrophobic titanium nanostructured surfaces had lower erythrocyte adhesion, less morphological changes in adhered cells, lower thrombin generation, lower complement activation, and were less cytotoxic compared to control surfaces. Thus, superhydrophobic titanium nanostructured surfaces may be a promising approach to prevent thrombosis for several medical devices.

Modification of Thin Film Composite Membrane by Chitosan-Silver Particles to Improve Desalination and Anti-Biofouling Performance.

Reverse osmosis (RO) desalination is a technology that is commonly used to mitigate water scarcity problems; one of its disadvantages is the bio-fouling of the membranes used, which reduces its performance. In order to minimize this problem, this study prepared modified thin film composite (TFC) membranes by the incorporation of chitosan–silver particles (CS–Ag) of different molecular weights, and evaluated them in terms of their anti-biofouling and desalination performances. The CS–Ag were obtained using ionotropic gelation, and were characterized by Fourier transform infrared spectroscopy (FTIR), high-resolution scanning electron microscopy (HR-SEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA) and dynamic light scattering (DLS). The modified membranes were synthetized by the incorporation of the CS–Ag using the interfacial polymerization method. The membranes (MCS–Ag) were characterized by Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and contact angle. Bactericidal tests by total cell count were performed using Bacillus halotolerans MCC1, and anti-adhesion properties were confirmed through biofilm cake layer thickness and total organic carbon (%). The desalination performance was defined by permeate flux, hydraulic resistance, salt rejection and salt permeance by using 2000 and 5000 mg L−1 of NaCl. The MCS–Ag-L presented superior permeate flux and salt rejection (63.3% and 1% higher, respectively), as well as higher bactericidal properties (76% less in total cell count) and anti-adhesion capacity (biofilm thickness layer 60% and total organic carbon 75% less, compared with the unmodified membrane). The highest hydraulic resistance value was for MCS–Ag-M. In conclusion, the molecular weight of CS–Ag significantly influences the desalination and the antimicrobial performances of the membranes; as the molecular weight decreases, the membranes’ performances increase. This study shows a possible alternative for increasing membrane useful life in the desalination process.

Silver-Hydrogel/PDMS film with high mechanical strength for anti-interference strain sensor

Hydrogels have recently emerged as promising candidates for wearable strain sensors. However, their poor mechanical stability and fragility limited their applications in many fields. Inspired by the skins, we developed a double-layer structured silver-Hydrogel/PDMS composite film (Ag-Hydrogel/PDMS) by chemically bonding the PDMS with a conductive Ag-Hydrogel layer. After assembled with the zinc, air electrodes and a fixed resistor, a self-powered Ag-Hydrogel/PDMS strain sensor was obtained. The mechanical properties of the Ag-Hydrogel/PDMS strain sensor was significantly enhanced due to the chemically bonded PDMS film. Compared to PDMS and Ag-Hydrogel alone, the tensile stress of Ag-Hydrogel/PDMS composite film increased by 3.4 and 58.1 times, respectively. The prepared Ag-Hydrogel/PDMS composite film could easily lift a 1050 g item without obviously interfacial failure. And it could output different voltage signals upon various finger motions without any external power supplies. Interestingly, the inert nature of PDMS also greatly improved the anti-interference property of the Ag-Hydrogel/PDMS strain sensor, as it protected the Ag-Hydrogel from the complicated environments. Moreover, excellent antibacterial activity of the Ag-Hydrogel/PDMS strain sensor against both of the E. coli and S. aureus bacteria was observed, which could be ascribed to the distribution of Ag nanocubes in the hydrogel matrix. The hydrophobic property of the PDMS layer further entitled the Ag-Hydrogel/PDMS strain sensor with a good bacterial anti-adhesion property. These characteristics guarantee the self-powered Ag-Hydrogel/PDMS strain sensor with potential application as wearable and portable electronic devices in complicated environments.

Lubricant-entrenched slippery surface-based nanocarriers to avoid macrophage uptake and improve drug utilization

IntroductionReducing the protein adsorption of nanoparticles (NPs) as drug carriers to slow their rapid clearance by macrophages uptake is a critical challenge for NPs clinical translational applications. Despite extensive research efforts to inhibit cellular uptake, including covering biological agents or surface chemical coatings to impart “stealth” properties to NPs, their stability remains insufficient. ObjectivesDeveloped a novel surface modification technology based on a physical infusion engineering approach to achieve persistent inhibition of protein adhesion and cellular uptake by nanocarriers. MethodsThe nanoparticles were prepared based on conventional drug carrier mesoporous silica NPs through a two-step process. A functional nanoscale slippery surface was formed by grafting “liquid-like” brushes on the particles surface, and then a lubricant-entrenched slippery surfaces (LESS) was formed by infusing silicone oil lubricant into the entire surface. Co-incubation with macrophages (in vitro and in vivo) was used to examine the anti-uptake properties of modified NPs. The anti-adhesion properties of LESS coating surfaces to various liquids, proteins and cells were used to analyze the anti-uptake mechanism. Loaded with drugs, combined with tumor models, to evaluate the drug utilization of modified NPs. ResultsRelying on the stable and slippery LESS coating, the modified surface could prevent the adhesion of various liquids and effectively shield against the adhesion of proteins and cells, as well as remarkably reduce macrophage cellular uptake in vitro and in vivo. In addition, the LESS coating does not affect cell activity and allows NPs to be loaded with drugs, significantly improving the utilization of drugs in vitro and in vivo. This allows the NPs to reach to the target tumor site for drug delivery without active clearance by macrophages. ConclusionOur research introduces a new nanocarrier technology to improve anti-biofouling performance and stealth efficiency that will facilitate the development of nanomedicines for clinical transformation applications.