Antimicrobial Surfaces Research Articles

Antimicrobial activity, surface properties, and cytotoxicity of microencapsulated phytochemicals incorporated into three-dimensionally printable dental polymers

ObjectivesThis study aimed to investigate the antimicrobial properties of three dimensionally-printed dental polymers (3DPs) incorporated with microencapsulated phytochemicals (MPs) and to assess their surface characteristics and cytotoxicity. MethodsMPs derived from phytoncide oil and their specific chemical components were introduced into suspensions of three microbial species: Streptococcus gordonii, Streptococcus oralis, and Candida albicans. Optical density was measured to determine the microbial growth in the presence of MPs for testing their antimicrobial activity. MPs at 5% (w/w) were mixed with dental polymers and dispersants to 3DP discs. These microbial species were then seeded onto the discs and incubated for 24 h. The antibacterial and antifungal activities of MP-containing 3DPs were evaluated by counting the colony-forming units (n = 3). The biofilm formation on the 3DP was assessed by crystal violet staining assay (n = 3). Microbial viability was determined using a live–dead staining and CLSM observation (n = 3). Surface roughness and water contact angle were assessed (n = 10). Cytotoxicity of MP-containing 3DPs for human gingival fibroblast was evaluated by MTT assay. ResultsMPs, particularly (-)-α-pinene, suppressed the growth of all tested microbial species. MP-containing 3DPs significantly reduced the colony count (P ≤ 0.001) and biofilm formation (P ≤ 0.009), of all tested microbial species. Both surface roughness (P < 0.001) and water contact angle (P < 0.001) increased. The cytotoxicity remained unchanged after incorporating MPs to the 3DPs (P = 0.310). ConclusionsMPs effectively controlled the microbial growth on 3DPs as evidenced by the colony count, biofilm formation, and cell viability. Although MPs modified the surface characteristics, they did not influence the cytotoxicity of 3DPs. Clinical SignificanceIntegration of MPs into 3DPs could produce dental prostheses or appliances with antimicrobial properties. This approach not only provides a proactive solution to reduce the risk of oral biofilm-related infection but also ensures the safety and biocompatibility of the material, thereby improving dental care.

Cell Adhesion, Elasticity, and Rupture Forces Guide Microbial Cell Death on Nanostructured Antimicrobial Titanium Surfaces.

Naturally occurring and synthetic nanostructured surfaces have been widely reported to resist microbial colonization. The majority of these studies have shown that both bacterial and fungal cells are killed upon contact and subsequent surface adhesion to such surfaces. This occurs because the presence of high-aspect-ratio structures can initiate a self-driven mechanical rupture of microbial cells during the surface adsorption process. While this technology has received a large amount of scientific and medical interest, one important question still remains: what factors drive microbial death on the surface? In this work, the interplay between microbial-surface adhesion, cell elasticity, cell membrane rupture forces, and cell lysis at the microbial-nanostructure biointerface during adsorptive processes was assessed using a combination of live confocal laser scanning microscopy, scanning electron microscopy, in situ amplitude atomic force microscopy, and single-cell force spectroscopy. Specifically, the adsorptive behavior and nanomechanical properties of live Gram-negative (Pseudomonas aeruginosa) and Gram-positive (methicillin-resistant Staphylococcus aureus) bacterial cells, as well as the fungal species Candida albicans and Cryptococcus neoformans, were assessed on unmodified and nanostructured titanium surfaces. Unmodified titanium and titanium surfaces with nanostructures were used as model substrates for investigation. For all microbial species, cell elasticity, rupture force, maximum cell-surface adhesion force, the work of adhesion, and the cell-surface tether behavior were compared to the relative cell death observed for each surface examined. For cells with a lower elastic modulus, lower force to rupture through the cell, and higher work of adhesion, the surfaces had a higher antimicrobial activity, supporting the proposed biocidal mode of action for nanostructured surfaces. This study provides direct quantification of the differences observed in the efficacy of nanostructured antimicrobial surface as a function of microbial species indicating that a universal, antimicrobial surface architecture may be hard to achieve.

Rapid Environmental Contamination With Candida auris and Multidrug-Resistant Bacterial Pathogens Near Colonized Patients.

Environmental contamination is suspected to play an important role in Candida auris transmission. Understanding speed and risks of contamination after room disinfection could inform environmental cleaning recommendations. We conducted a prospective multicenter study of environmental contamination associated with C. auris colonization at 6 ventilator-capable skilled nursing facilities and 1 acute care hospital in Illinois and California. Known C. auris carriers were sampled at 5 body sites followed by sampling of nearby room surfaces before disinfection and at 0, 4, 8, and 12 hours after disinfection. Samples were cultured for C. auris and bacterial multidrug-resistant organisms (MDROs). Odds of surface contamination after disinfection were analyzed using multilevel generalized estimating equations. Among 41 known C. auris carriers, colonization was detected most frequently on palms/fingertips (76%) and nares (71%). C. auris contamination was detected on 32.2% (66/205) of room surfaces before disinfection and 20.5% (39/190) of room surfaces by 4 hours after disinfection. A higher number of C. auris-colonized body sites was associated with higher odds of environmental contamination at every time point following disinfection, adjusting for facility of residence. In the rooms of 38 (93%) C. auris carriers co-colonized with a bacterial MDRO, 2%-24% of surfaces were additionally contaminated with the same MDRO by 4 hours after disinfection. C. auris can contaminate the healthcare environment rapidly after disinfection, highlighting the challenges associated with environmental disinfection. Future research should investigate long-acting disinfectants, antimicrobial surfaces, and more effective patient skin antisepsis to reduce the environmental reservoir of C. auris and bacterial MDROs in healthcare settings.

Facile green synthesis of Phyllanthus emblica extract based Ag-NPs for antimicrobial and response surface methodology based catalytic reduction applications

Silver nanostructures were synthesized by utilizing facile and simple green methodology based on the usage of biogenic Phyllanthus emblica fruit extract. The Fourier transform infrared spectroscopy revealed that the numerous phytochemicals were found to be present in the extract that were responsible for reducing the precursor salt into nanoparticles. After 10 min, the silver nanoparticles were formed in the system while the further nucleation for 30 min resulted in the generation of the silver nanostructures with dual morphology (spherical & rod-like morphology). The reaction time/nucleation time was found to be the major factor responsible for the modulation of the morphology of the biogenic nanomaterials. The crystalline nature with the cubic crystal system was observed in the case of the silver nanostructure via X-ray diffraction analysis. The antimicrobial efficacy investigated for these nanostructures revealed that the silver nanostructures possess comparable or greater efficacy than the selected control. The excellent efficacy is attributed to the smaller size and the peculiar morphological characteristics of the silver nanostructures. The catalytic reduction of 4-nitrophenol via silver nanostructures was also investigated by using the response surface methodology as an optimization tool. An extremely high percentage reduction value of 96.491 % with the rate constant value of 0.277 min−1 was documented in the case of Ag-NSs. The prepared silver nanostructures were found to be extremely stable till six reuse cycles. Our findings affirm that the efficient synthesis of nanostructures is achieved by using P. emblica fruit extract and the synthesized material further presents excellent viability for antimicrobial and catalytic applications.

Antimicrobial approaches for medical implants coating to prevent implants associated infections: Insights to develop durable antimicrobial implants

Advances in implantable technologies results from the rapid improvements in research in the fields of biomedical engineering, biomaterial science, and chemistry. No doubt, implantable technologies have provided greater comfort against several illnesses and diseases; however, pathogens adherence and biofilm formation are still the issues that need to be taken into consideration for further implant modifications. Pathogens colonize implants in a surface-dependent manner, so chances of pathogens' adhesion can be minimized by creating anti-adhesive and antimicrobial surfaces. The ongoing research is focused on the design of appropriate multifunctional coatings with a broad antimicrobial spectrum and high biocompatibility. Antimicrobial peptides in conjugation with polymers, nanoparticles, and other biocompatible agents can be potentially used to develop multifunctional coatings. Antibiotics-based coatings are the ultimate approach; however, optimizing the controlled release of antibiotics will be a breakthrough in this decade. Polymers unveil the extraordinary potential in implant coatings by increasing biocompatibility of coatings, offering the possibility for a triggered release of antimicrobial agents. An in-depth review of effective and biocompatible antimicrobial implant coatings is provided herein. We thoroughly discuss the remarkable antimicrobial agents and their compatibility with the host, including seemingly underexplored stability issues and providing an overlook on different methods of fabrication. The ever-growing materials research field can use this review's highlights to develop multifunctional implant coatings to reduce implant-associated infections.

Antibacterial activity of solid surfaces is critically dependent on relative humidity, inoculum volume, and organic soiling.

Antimicrobial surface materials potentially prevent pathogen transfer from contaminated surfaces. Efficacy of such surfaces is assessed by standard methods using wet exposure conditions known to overestimate antimicrobial activity compared to dry exposure. Some dry test formats have been proposed but semi-dry exposure scenarios e.g. oral spray or water droplets exposed to ambient environment, are less studied. We aimed to determine the impact of environmental test conditions on antibacterial activity against the model species Escherichia coli and Staphylococcus aureus. Surfaces based on copper, silver, and quaternary ammonium with known or claimed antimicrobial properties were tested in conditions mimicking microdroplet spray or larger water droplets exposed to variable relative air humidity in the presence or absence of organic soiling. All the environmental parameters critically affected antibacterial activity of the tested surfaces from no effect in high-organic dry conditions to higher effect in low-organic humid conditions but not reaching the effect size demonstrated in the ISO 22169 wet format. Copper was the most efficient antibacterial surface followed by silver and quaternary ammonium based coating. Antimicrobial testing of surfaces using small droplet contamination in application-relevant conditions could therefore be considered as one of the worst-case exposure scenarios relevant to dry use surfaces.

Transcriptional Response of Candida albicans to Nanostructured Surfaces Provides Insight into Cellular Rupture and Antifungal Drug Sensitization.

The rise in resistance levels against antifungal drugs has necessitated the development of strategies to combat fungal infections. Nanoscale antimicrobial surfaces, found on the cuticles of insects, have recently emerged as intriguing alternative antifungal strategies that function passively via contact and induced cell rupture. Nanostructured surfaces (NSS) offer a potentially transformative antimicrobial approach to reducing microbial biofilm formation. We examined the transcriptional response of Candida albicans, an opportunistic pathogen that is also a commensal dimorphic fungus, to the NSS found in the wings of Neotibicen spp. cicada and found characteristic changes in the expression of C. albicans genes associated with metabolism, biofilm formation, ergosterol biosynthesis, and DNA damage response after 2 h of exposure to the NSS. Further validation revealed that these transcriptional changes, particularly in the ergosterol biosynthesis pathway, sensitize C. albicans to major classes of antifungal drugs. These findings provide insights into NSS as antimicrobial surfaces and as a means of controlling biofilm formation.

Photosensitive cellulosic materials based on a covalently grafted phenosafranin-modified silsesquioxane analog for bactericidal applications

Light-triggered antimicrobial cellulose surfaces were obtained by the immobilization of a photosensitive phenosafranin dye (PSF) in a hybrid organic–inorganic silsesquioxane polymer applied on handsheets prepared from a standard bleached softwood pulp. These coatings were deposited by polycondensation of methyltriethoxysilane and an alkoxysilyl derivative of phenosafranin (TESPSF) obtained by the thiolene addition reaction and coupling of the succinic anhydride derivative with a primary amine group of PSF. TESPSF and coatings were characterized by advanced techniques in terms of chemical structure (1H, 13C, 29Si NMR, MS, ATR-IR), surface properties (SEM, EDX, water contact angles), and optical properties (UV, reflection light intensity, ISO brightness). The light-induced antimicrobial activity of sheets of paper coated with new materials showed the inhibition of the growth of the bacteria Staphylococcus aureus ATCC 6538 and Escherichia coli ATCC 8739. The cytotoxicity studies of modified cellulose surfaces were performed using erythrocyte lysis assays under both dark and light conditions exhibited no toxicity on erythrocytes. Thus, the new material did not reveal harmful effects on erythrocytes, regardless of the presence and absence of light.

Self-renewal poly-Schiff base/gallium-based liquid metal composite coatings triggered via water for superior antimicrobial performance under water

Antimicrobial and antifouling coatings, containing either biocides or antibiotics, are extensively employed in medical facilities, marine engineering and various daily settings. Nonetheless, the misapplication of these substances has caused the proliferation of super-resistant bacteria and ecological destruction. While liquid metals present an encouraging option for antimicrobial purposes, the currently available technologies encounter issues associated with particle uniformity and the regulation of Ga3+ release. A water-triggered degradable polymer, namely polyurea-modified poly Schiff base polymer (PIPT), is designed and prepared successfully. The imine bond and urea group of PIPT efficiently generate and stabilize gallium-based liquid metal particles (GLPs). After the solvent evaporation, we obtain a poly-Schiff base/gallium-based liquid metal composite coating (PIPT/G) with a PIPT cover layer measuring approximately 1–2 μm. This cover layer successfully prevents both outflow and contamination of the liquid metal inside. PIPT/G coatings are easily applicable to various kinds of substrates, including fabric, glass and plastic tubes. The degradability of poly-Schiff base materials promotes self-renewal of the coating and control the contact state of water with liquid metal, regulating release of Ga3+. These bifunctional PIPT/G composite coatings exhibit >99 % pathogen eradication by combining antimicrobial action with self-renewal capabilities. This simple yet innovative coating method has the potential to produce highly effective antimicrobial surfaces.

Titanium-Dioxide-Nanoparticle-Embedded Polyelectrolyte Multilayer as an Osteoconductive and Antimicrobial Surface Coating

Bioactive surface coatings have retained the attention of researchers and physicians due to their versatility and range of applications in orthopedics, particularly in infection prevention. Antibacterial metal nanoparticles (mNPs) are a promising therapeutic, with vast application opportunities on orthopedic implants. The current research aimed to construct a polyelectrolyte multilayer on a highly porous titanium implant using alternating thin film coatings of chitosan and alginate via the layer-by-layer (LbL) self-assembly technique, along with the incorporation of silver nanoparticles (AgNPs) or titanium dioxide nanoparticles (TiO2NPs), for antibacterial and osteoconductive activity. These mNPs were characterized for their physicochemical properties using quartz crystal microgravimetry with a dissipation system, nanoparticle tracking analysis, scanning electron microscopy, and atomic force microscopy. Their cytotoxicity and osteogenic differentiation capabilities were assessed using AlamarBlue and alkaline phosphatase (ALP) activity assays, respectively. The antibiofilm efficacy of the mNPs was tested against Staphylococcus aureus. The LbL polyelectrolyte coating was successfully applied to the porous titanium substrate. A dose-dependent relationship between nanoparticle concentration and ALP as well as antibacterial effects was observed. TiO2NP samples were also less cytotoxic than their AgNP counterparts, although similarly antimicrobial. Together, these data serve as a proof-of-concept for a novel coating approach for orthopedic implants with antimicrobial and osteoconductive properties.

Multimodification of a 304 Stainless Steel Surface Based on DA/PEI/SiO2 for Improving Surface Antimicrobial Performance

An innovative antifouling composite coating comprising dopamine (DA), polyethyleneimine (PEI), and silica (SiO2) was developed through a straightforward and environmentally friendly approach. Initially, silica nanoparticles comodified with DA and PEI were meticulously deposited onto 304 stainless steel surfaces pretreated with dopamine to achieve a uniformly distributed nanocomposite surface. Comprehensive analytical techniques, including Fourier transform infrared spectrometry (FTIR), X-ray photoelectron spectrometry (XPS), field emission scanning electron microscopy (SEM), contact angle measurement (CA), and 3D optical profilometry, were employed to affirm the successful preparation of the silica nanocomposite coatings and the effective grafting of MAG II. The antibacterial and antibiofilm performance of the DA/PEI/SiO2-modified surface was rigorously assessed using Vibrio natriegens (V. natriegens), yielding compelling results indicating a substantial 51.4% reduction in biofilm formation on the SS-DA/PEI/SiO2 sample surfaces, coupled with an impressive 95.2% decrease in V. natriegens adhesion. This pioneering research introduces an innovative strategy for the development of antimicrobial surfaces with promising applications in medical devices, aquaculture, and related fields.

Activity of antimicrobial examination gloves under realistic conditions: challenge not fulfilled

BackgroundAntimicrobial materials or surfaces are advertised as part of infection prevention bundles. However, the efficacy of such antimicrobial surfaces has not been sufficiently investigated in hospitals. In this study, the antimicrobial activity of examination gloves with light-activated antimicrobial properties against Gram-positive microorganisms was investigated modelling real live conditions.MethodIn a standardized experimental set-up with dry and realistic contamination, the antimicrobial properties of gloves claiming light dependent antimicrobial activity against Gram-positive organisms were tested in comparison with conventional examination gloves. All gloves were contaminated through a standardized activity of the test persons for construction with contaminated building blocks. For contamination suspensions of Enterococcus faecium ATCC 6057, Acinetobacter baumannii (outbreak strain), methicillin resistant Staphylococcus aureus ATCC 43300 or E. faecium (VRE) patient isolate were dried on the surfaces. After the standardized activity, the gloves were held for 10 min in the light present in the room (bright conditions) and the grade of contamination was determined subsequently by quantitative culture. In one experimental series gloves were held in a dark box after contamination as a control (dark conditions).ResultsThe light intensity in all experiments under bright conditions was significantly above the limit value specified by the manufacturer for the activation of antimicrobial properties (> 500 lx). The mean values for experiments with antimicrobial active and non-active gloves were 955 and 935 lx, respectively. As claimed by the manufacture, the gloves showed no sufficient efficacy against A. baumannii under bright conditions. Against Gram-positive microorganisms such as E. faecium, E. faecium (VRE) and methicillin resistant S. aureus the gloves showed only very low antimicrobial activity with a reduction factor < 1 log10 even after 10 min in bright conditions. Interestingly, comparable results for experiments with A. baumannii and E. faecium were shown under dark conditions.ConclusionThe lack of activity of the active principle against Gram-negative microorganisms could be confirmed. The reduction factors of > 4 log10 within 5 min for Gram-positive microorganisms claimed for the product using a standard test procedure (ASTM D7907) could not be confirmed in a realistic experimental test set-up even after 10 min of light exposure. The effectiveness against Gram-positive microorganisms should be further investigated under realistic (dry) conditions, including patient care. At this stage, the use of supposedly antimicrobial gloves should not be recommended, as the belief in their efficacy may encourage the misuse of gloves.

Fabrication methodologies for antimicrobial polypropylene surfaces with leachable and nonleachable antimicrobial agents

AbstractReported herein is the fabrication of antimicrobial polypropylene (PP) surfaces with nonleachable magnesium hydroxide biocides and compares its performance with leachable copper (II) chloride dihydrate. Two methods were used for creating PP‐bearing biocides. One way involves melt‐blending of biocides and PP and subsequent injection molding to create the desired antimicrobial PP surface. Another technique consists of thermal embossing of antimicrobial agents on the PP surface. The biocide‐bearing PP surfaces were evaluated against Escherichia coli (E. coli) K‐12 MG1655) for up to 24 h. In the case of injection‐molded PP system, leachable CuCl2·2H2O showed a 5.87 ± 0.01 log reduction after 24 h, but only 0.47 ± 0.03 log reduction for PP bearing nonleachable Mg(OH)2. On the contrary, thermally embossed PP with CuCl2·2H2O and Mg(OH)2 showed 2.28 ± 0.03 and 3.78 ± 0.03 log reductions, respectively, after 24 h. The nonleachable Mg(OH)2 imparted antimicrobial properties only to the PP surface prepared via thermal embossing. In contrast, owning to the leachable copper ions, leachable CuCl2·2H2O biocides imparted PP surfaces antimicrobial irrespective of the molding or surface embossing approach. This approach provides an advantage for nonleachable PP‐based antimicrobial surfaces in overcoming the toxicity concern associated with plastics bearing leachable biocides.

In vitro comparison of methods for sampling copper-based antimicrobial surfaces.

Self-sanitizing surfaces such as copper (Cu) are increasingly used on high-touch surfaces to prevent the spread of harmful viruses and bacteria. Being able to monitor the antimicrobial properties of Cu is fundamental in measuring its antimicrobial efficacy. Thorough investigations into reliable methods to enumerate bacteria from self-sanitizing surfaces are lacking in the literature. This study demonstrates that direct use of Petrifilm on Cu surfaces most likely revives stressed and dying bacteria, which induces increased bacterial counts. This phenomenon was not observed with indirect collection methods. Studies assessing time-kill kinetics or long-term efficacy of Cu should consider the impact of the collection method chosen.

Chemoselective Coatings of GL13K Antimicrobial Peptides for Dental Implants.

Dental implant-associated infection is a clinical challenge which poses a significant healthcare and socio-economic burden. To overcome this issue, developing antimicrobial surfaces, including antimicrobial peptide coatings, has gained great attention. Different physical and chemical routes have been used to obtain these biofunctional coatings, which in turn might have a direct influence on their bioactivity and functionality. In this study, we present a silane-based, fast, and efficient chemoselective conjugation of antimicrobial peptides (Cys-GL13K) to coat titanium implant surfaces. Comprehensive surface analysis was performed to confirm the surface functionalization of as-prepared and mechanically challenged coatings. The antibacterial potency of the evaluated surfaces was confirmed against both Streptococcus gordonii and Streptococcus mutans, the primary colonizers and pathogens of dental surfaces, as demonstrated by reduced bacteria viability. Additionally, human dental pulp stem cells demonstrated long-term viability when cultured on Cys-GL13K-grafted titanium surfaces. Cell functionality and antimicrobial capability against multi-species need to be studied further; however, our results confirmed that the proposed chemistry for chemoselective peptide anchoring is a valid alternative to traditional site-unspecific anchoring methods and offers opportunities to modify varying biomaterial surfaces to form potent bioactive coatings with multiple functionalities to prevent infection.

Facile Construction of Antimicrobial Surface via One-Step Co-Deposition of Peptide Polymer and Dopamine.

The infections associated with implantable medical devices can greatly affect the therapeutic effect and impose a heavy financial burden. Therefore, it is of great significance to develop antimicrobial biomaterials for the prevention and mitigation of healthcare-associated infections. Here, a facile construction of antimicrobial surface via one-step co-deposition of peptide polymer and dopamine is reported. The co-deposition of antimicrobial peptide polymer DLL60 BLG40 with dopamine (DA) on the surface of thermoplastic polyurethane (TPU) provides peptide polymer-modified TPU surface (TPU-DLL60 BLG40 ). The antimicrobial test shows that the TPU-DLL60 BLG40 surfaces of the sheet and the catheter both exhibit potent killing of 99.9% of methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli (E. coli). In addition, the TPU-DLL60 BLG40 surface also exhibits excellent biocompatibility. This one-step antimicrobial modification method is fast and efficient, implies promising application in surface antimicrobial modification of implantable biomaterials and medical devices.

Nanoscale Titanium Surface Engineering via Low-Temperature Hydrothermal Etching for Enhanced Antimicrobial Properties.

Bioinspired nanotopography artificially fabricated on titanium surfaces offers a solution for the rising issue of postoperative infections within orthopedics. On a small scale, hydrothermal etching has proven to deliver an effective antimicrobial nanospike surface. However, translation to an industrial setting is limited by the elevated synthesis temperature (150 °C) and associated equipment requirements. Here, for the first time, we fabricate surface nanostructures using comparatively milder synthesis temperatures (75 °C), which deliver physicochemical properties and antimicrobial capability comparable to the high-temperature surface. Using a KOH etchant, the simultaneous formation of titania and titanate crystals at both temperatures produces a one-dimensional nanostructure array. Analysis indicated that the formation mechanism comprises dissolution and reprecipitation processes, identifying the deposited titanates as hydrated layered tetra-titanates (K2Ti4O9·nH2O). A proposed nanospike formation mechanism was confirmed through the identification of a core and outer shell for individual nanostructures, primarily comprised of titanates and titania, respectively. Etching conditions dictated crystalline formation, favoring a thicker titanate core for nanorods under higher synthesis temperatures and etchant concentrations. A bactericidal investigation showed the efficacy against Gram-negative bacteria for a representative low-temperature nanosurface (34.4 ± 14.4%) was comparable to the higher temperature nanosurface (34.0 ± 17.0%), illustrating the potential of low-temperature hydrothermal synthesis. Our results provide valuable insight into the applicability of low-temperature etching protocols that are more favorable in large-scale manufacturing settings.

Plant-inspired modification strategy for the large-scale, versatile preparation of cellulose-based products with highly effective and durable UV-protective, antimicrobial, and antiviral performance

Cellulose is a versatile and renewable material used in clinical settings for dressings, masks, and bedding. However, adding functions like UV-shielding, antiviral, and antibacterial properties can be challenging due to its poor adhesion and reduced effectiveness over time. Inspired by the natural structure of plant cell walls, we propose a scalable and versatile strategy by introducing curcumin and lysine to the cellulose surface via the Mannich reaction to achieve a durable antimicrobial and UV-protective cellulose surface. The ensuring chemical configuration was characterized through Nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Additionally, X-ray diffraction analysis confirmed that the modification occurred exclusively at the cellulose surface. We found curcumin-modified sulfated nanocellulose nanofibrils (CL-SCNF) entirely block ultraviolet rays at wavelengths of 200–400 nm (UVA, UVB, and UVC) while providing 82.1 % transparency in the visible spectrum. The resultant silver bonding cellulose products exhibit high antiviral, antibacterial, and antifungal performance against bacterial phage-X174, Escherichia coli, Staphylococcus aureus, and Candida albicans. Furthermore, the strong coordination bonding of silver ions with the β-diketone system endows the final textiles with good washing stability, which can maintain 99 % of antimicrobial activity after repeated washing. This eco-friendly and highly scalable method for fabricating antimicrobial cellulose surfaces will be attractive to manufacturers of protective equipment and textiles, as it offers great potential for applications in a wide range of fields.

Bio-Inspired Nanomaterials for Micro/Nanodevices: A New Era in Biomedical Applications.

Exploring bio-inspired nanomaterials (BINMs) and incorporating them into micro/nanodevices represent a significant development in biomedical applications. Nanomaterials, engineered to imitate biological structures and processes, exhibit distinctive attributes such as exceptional biocompatibility, multifunctionality, and unparalleled versatility. The utilization of BINMs demonstrates significant potential in diverse domains of biomedical micro/nanodevices, encompassing biosensors, targeted drug delivery systems, and advanced tissue engineering constructs. This article thoroughly examines the development and distinctive attributes of various BINMs, including those originating from proteins, DNA, and biomimetic polymers. Significant attention is directed toward incorporating these entities into micro/nanodevices and the subsequent biomedical ramifications that arise. This review explores biomimicry's structure-function correlations. Synthesis mosaics include bioprocesses, biomolecules, and natural structures. These nanomaterials' interfaces use biomimetic functionalization and geometric adaptations, transforming drug delivery, nanobiosensing, bio-inspired organ-on-chip systems, cancer-on-chip models, wound healing dressing mats, and antimicrobial surfaces. It provides an in-depth analysis of the existing challenges and proposes prospective strategies to improve the efficiency, performance, and reliability of these devices. Furthermore, this study offers a forward-thinking viewpoint highlighting potential avenues for future exploration and advancement. The objective is to effectively utilize and maximize the application of BINMs in the progression of biomedical micro/nanodevices, thereby propelling this rapidly developing field toward its promising future.

Nanoscale iodophoric poly(vinyl amide) coatings for the complexation and release of iodine for antimicrobial surfaces

Wound infection exacerbated by multidrug-resistant (MDR) bacteria has necessitated the need for wound dressing materials with embedded antimicrobial property to prevent the development of chronic wounds. Iodine (I2), typically as a poly(vinyl pyrrolidone)-I2 (PVP–I) complex, is a widely used antiseptic agent in wound care owing to its efficacy, safety, and low probability to cause further resistance. Despite extensive research on PVP–I formulations, there is potentially a large selection of poly(vinyl amide)s that have remained largely unexplored as iodophoric materials, particularly as coatings for wound dressings and medical devices. Therefore, in this study we prepared a series of stable, cross-linked poly(vinyl amide) coatings via plasma polymerization and studied their structure–property relationships for the complexation and release of I2. Plasma polymerized poly(N-vinyl-2-pyrrolidone) (pPVP), poly(N-methyl-N-vinylacetamide) (pPMVA) and poly(N-vinylcaprolactam) (pPVCl) nanoscale coatings were prepared with uniform thicknesses of 330–340 nm and low surface roughness. Complexation of I2 as polyiodides resulted in a significant increase in the pPVCl coating thickness in phosphate buffered saline (PBS), consistent with the Hofmeister effect. Raman spectroscopy confirmed that the I2 was complexed exclusively as the triiodide ion (I3-) in all coatings, which was confirmed by synchrotron X-ray photoelectron spectroscopy (XPS) experiments. Nuclear magnetic resonance (NMR) spectroscopy of poly(vinyl amides) was employed to further prove that the complexing species was hydrogen triiodide (HI3). The loading of I2 species increased from pPVP < pPMVA < pPVCl, with percentage elemental compositions of 1.3, 1.8, and 2.9%, respectively, which correlated with the extent of nitrogen loss during polymerization and oxidation, and was also in agreement with determined negative zeta potential values. However, quantification of the released I2 species over 5 h showed that the greatest release was observed from pPMVA (121.3 µg.cm−2), with pPVP (77.4 µg.cm−2) and pPVCl (74.6 µg.cm−2) releasing a similar amount, highlighting that I2 release from poly(vinyl amide) coatings is a function of the loading and composition of the polymer, not just the I2 complexing amide motif. The I2 complexed pPMVA coated wound dressings were highly effective against Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus, the two major strains associated with wound infection, reducing bacterial viability by up to 4 and 7 (log10 reduction) orders of magnitude. Overall, the poly(vinyl amide) coatings are promising iodophors for the prevention and treatment of wound infections.