Antibacterial Hydrogel Research Articles

AgNPs-loaded chitosan/sodium alginate hydrogel film by in-situ green reduction with tannins for enhancing antibacterial activity

Bacterial infections pose a significant challenge to global public health, and the development of innovative antibacterial materials is becoming increasingly urgent. Currently, hydrogels are widely studied for the treatment of bacterial infection. However, it is still a great challenge to load antibacterial nanoparticles into the hydrogel matrix by using green synthesis method. Tannic acid (TA) is an eco-friendly reducing agent for the synthesis of metal nanoparticles, and it also has antibacterial activity. In this paper, an antibacterial chitosan/sodium alginate (HCS/SA) hydrogel film embedded with AgNPs was fabricated through in-situ green reduction with TA to utilize the synergistic antibacterial effect of TA and silver nanoparticles (AgNPs). The chemical composition and morphology of the antibacterial hydrogel were characterized by using FTIR, XRD, SEM, and EDS. The results demonstrated that TA solution under alkaline conditions could convert AgNO3 to AgNPs, and AgNPs were embedded uniformly on the surface of the HCS/SA hydrogel film. In addition, the pH of the TA solution significantly influenced the swelling behavior of the antibacterial hydrogel films. When the pH of the TA solution increased from 7 to 10, the swelling ratio of the antibacterial hydrogel film increased from 388.89% to 648.69%. In addition, the hemolysis rates of our prepared hydrogel films were below 5%, meeting the safety requirements. In vitro antibacterial experiments revealed that the fabricated hydrogel films showed excellent antibacterial effects against E. coli, S. aureus, and P. aeruginosa with inhibition zones up to 25.8 ± 0.24 mm, 32.2 ± 0.62 mm, and 22.6 ± 0.49 mm, respectively. Therefore, the antibacterial hydrogel films developed in this study hold potential for treating bacteria-infected wounds.

Recent Progress in antibacterial hydrogel coatings for targeting biofilm to prevent orthopedic implant-associated infections.

The application of orthopedic implants for bone tissue reconstruction and functional restoration is crucial for patients with severe bone fractures and defects. However, the abiotic nature of orthopedic implants allows bacterial adhesion and colonization, leading to the formation of bacterial biofilms on the implant surface. This can result in implant failure and severe complications such as osteomyelitis and septic arthritis. The emergence of antibiotic-resistant bacteria and the limited efficacy of drugs against biofilms have increased the risk of orthopedic implant-associated infections (OIAI), necessitating the development of alternative therapeutics. In this regard, antibacterial hydrogels based on bacteria repelling, contact killing, drug delivery, or external assistance strategies have been extensively investigated for coating orthopedic implants through surface modification, offering a promising approach to target biofilm formation and prevent OIAI. This review provides an overview of recent advancements in the application of antibacterial hydrogel coatings for preventing OIAI by targeting biofilm formation. The topics covered include: (1) the mechanisms underlying OIAI occurrence and the role of biofilms in exacerbating OIAI development; (2) current strategies to impart anti-biofilm properties to hydrogel coatings and the mechanisms involved in treating OIAI. This article aims to summarize the progress in antibacterial hydrogel coatings for OIAI prevention, providing valuable insights and facilitating the development of prognostic markers for the design of effective antibacterial orthopedic implants.

A novel bola-molecular self-assembling hydrogel for enhancing diabetic wound healing

HypothesisChronic wounds, particularly those caused by diabetes, pose a significant challenge for clinical treatment due to their prolonged healing process and associated complications, which can lead to increased morbidity. A biocompatible hydrogel with strong antibacterial properties and the ability to promote angiogenesis can be directly absorbed in the wound site for healing. ExperimentsA series of self-healing, antibacterial bolaamphiphilic supramolecular self-assembling hydrogels (HLQMes/Cu) were developed based on metal–ligand coordination between various concentrations of Cu2+ solution and the head group of l-histidine methyl ester in HLQMes. This is the first report on the application of bola-molecular supramolecular hydrogels for the treatment of chronic wounds. FindingsThe bola-molecular hydrogels reduced the toxicity of copper ions by coordination, and the HLQMes/Cu hydrogel, with 1.3 mg/mL Cu2+ (HLQMes/Cu1.3), demonstrated good biocompatibility and antibacterial properties and effectively enhanced wound healing in a diabetic wound model with full-thickness injuries. Immunohistochemical analysis revealed that the HLQMes/Cu1.3 hydrogel enhanced epithelial formation and collagen deposition in wounds. Immunofluorescence studies confirmed that the HLQMes/Cu1.3 hydrogel attenuated the expression of proinflammatory factor (IL-6) and promoted angiogenesis by upregulating α-SMA and CD31. These findings demonstrate the potential of this bolaamphiphilic supramolecular self-assembling hydrogel as a promising candidate for diabetic wound treatment.

A chitosan-based antibacterial hydrogel with injectable and self-healing capabilities

The presence of bacteria directly affects wound healing. Chitosan-based hydrogel biomaterials are a solution as they offer advantages for wound-healing applications due to their strong antimicrobial properties. Here, a double-cross-linking chitosan-based hydrogel with antibacterial, self-healing, and injectable properties is reported. Thiolated chitosan was successfully prepared, and the thiolated chitosan molecules were cross-linked by Ag–S coordination to form a supramolecular hydrogel. Subsequently, the amine groups in the thiolated chitosan covalently cross-linked with genipin to further promote hydrogel formation. In vitro experimental results indicate that hydrogel can release Ag+ over an extended time, achieving an antibacterial rate of over 99% against Escherichia coli and Staphylococcus aureus. Due to the reversible and dynamic feature of Ag–S coordination, an antibacterial hydrogel exhibited injectable and self-healing capabilities. Additionally, the hydrogel showed excellent biocompatibility and biodegradability.

Highly Adhesive and Self-Healing Zwitterionic Hydrogels as Antibacterial Coatings for Medical Devices.

Bacterial infection of medical devices has caused incalculable losses to maintenance costs and health care. A single coating with antibacterial function cannot guarantee the long-term use of the device, because the coating will be damaged and fall off during reuse. To solve this problem, the development of coatings with high adhesion and self-healing ability is a wise direction. In this paper, a multifunctional polyzwitterionic antibacterial hydrogel coating (PZG) composed of amphozwitterion monomer, anionic monomer, and quaternary ammonium cationic monomer was synthesized by dipping UV photoinitiated polymerization. The structure of PZGs was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Ascribing to the hydrogel internal electrostatic interaction, hydrogen bond, and cation-π interaction, the obtained PZGs exhibited high ductility (>1200% strain) and appropriate strength (>189 kPa). Remarkably, PZGs could also adhere firmly on different substrates through noncovalent interaction, and their adhesion could be controlled by adjusting the amount of zwitterionic. Reversible physical interactions in polymer networks endowed hydrogels with excellent self-healing properties. In addition, PZGs exhibit good antibacterial activity and biocompatibility due to the synergistic effect of quaternary ammonium cation and amphozwitterion monomer. This work provides a multifunctional antibacterial coating for medical equipment and has broad application prospects in the biomedical field.

Self-Adhesive, Conductive, and Antibacterial Hydrogel Nanofiber Composite as a Flexible Strain Sensor

Self-Adhesive, Conductive, and Antibacterial Hydrogel Nanofiber Composite as a Flexible Strain Sensor

Preparation and Properties of Temperature-Sensitive Silver-Loaded Antibacterial Sericin/poly (N-isopropylacrylamide) Hydrogel

In this paper the silver ions in a silver nitrate solution were reduced to the Ag element by silk sericin (SS); then, N-isopropylacrylamide (NIPAAm) was added into the mixed solution of SS and silver nitrate to form the bifunctional SS/NIPAAm-Ag3 hydrogel with interpenetrating network structure with N,N-methylenebisacrylamide (BIS) as a cross-linking agent, ammonium persulfate (APS) as a initiator and N, N, N’, N-tetramethylethylenediamine (TEMED) as a co-initiator. SEM showed that the SS/NIPAAm-Ag3 hydrogel had a regular honeycomb structure and high porosity. It was confirmed by DSC that the SS/NIPAAm-Ag3 hydrogel exhibited temperature sensitivity, and its Lower Critical Solution Temperature (LCST) was about 35 °C. The swelling degree of the SS/NIPAAm-Ag3 hydrogel was obviously higher than that of SS/NIPAAm hydrogel at 25 °C and 37 °C. The time required for deswelling equilibrium was shortened by 2 h compared with SS/NIPAAm hydrogel, showing that the introduction of a certain amount of nano-Ag could give hydrogel excellent swelling and deswelling properties. The bacteriostatic rates against Esherichia coli (E.coli) and Staphylococcus aureus (S. aureus) reached 99.8% and 93.38%, respectively. A cytotoxicity test proved that SS/NIPAAm-Ag3 hydrogel had no adverse effects on the human cell health. The development of this temperature-sensitive and antibacterial hydrogel provides a new possibility for the preparation of hydrogel medical dressing.

A Synergistic Antibacterial Study of Copper-Doped Polydopamine on Ti3C2Tx Nanosheets with Enhanced Photothermal and Fenton-like Activities.

In response to the trend of drug-resistant and super bacteria, the existing single antibacterial methods are not sufficient to kill bacteria, and the development of multifunctional antibacterial nanomaterials is urgent. Our study aims to construct copper-doped polydopamine-coated Ti3C2Tx (CuPDA@Ti3C2Tx) with an enhanced photothermal property and Fenton-like activity. The nanocomposite hydrogel consisting of CuPDA@Ti3C2Tx and alginate can improve the antioxidant activity of two-dimensional MXene nanosheets by coating them with a thin layer of PDA nanofilm. Meanwhile, Cu ions are adsorbed through the coordination of PDA-rich oxygen-containing functional groups and amino groups. Calcium ions were further used to crosslink sodium alginate to obtain antibacterial hydrogel materials with combined chemotherapy and photothermal therapy properties. The photothermal conversion efficiency of CuPDA@Ti3C2Tx is as high as 57.7% and the antibacterial rate of Escherichia coli reaches 96.12%. The photothermal effect leads to oxidative stress in bacteria, increases cell membrane permeability, and a high amount of ROS and copper ions enter the interior of the bacteria, causing protein denaturation and DNA damage, synergistically leading to bacterial death. Our study involves a multifunctional synergistic antibacterial nanodrug platform, which is conducive to the development of high-performance antibacterial agents and provides important research ideas for solving the problem of drug-resistant bacteria.

Engineering Carbon Nanotube‐Based Photoactive COF to Synergistically Arm a Multifunctional Antibacterial Hydrogel

AbstractEnhancing the covalent organic framework (COF)’s photocatalytic ability synergistically with gelling formulations remains an urgent challenge for extended bio‐applications. Herein, COF is homogeneously coated on an oxidized carbon nanotube (OCNT) and coordinated by Fe3+ to obtain tubular nanocomplex OCNT@COF‐Fe (O@CF). The results showed that the photodynamic reactive oxygen species (ROS) generation ability of O@CF is enhanced due to the wrapped OCNT and the coordinated Fe3+, which can respectively serve as intermolecular charge transfer channel and electron acceptors/substrates (O2 and H2O) adsorbent to narrow the energy band gaps, increase the light absorption, and decrease the photogenerated carrier recombination. Synergistically, O@CF exhibited pH‐dependent peroxidase and catalase activities, which further enhanced ROS generation and relieved hypoxia, respectively. Meanwhile, O@CF possessed degradation of COF coatings‐dependent photothermal performances. Then, O@CF is evenly incorporated into Schiff base hydrogel via the COF coating‐participated covalent cross‐linking, to obtain an electroconductive hydrogel OCNT@COF‐Fe@Gel (O@CF@G). This O@CF@G can not only improve the mechanical properties of pure gel but also inherit the multifunction of O@CF. Consequently, it can well adhere to diabetic wounds for imbibition, drug‐resistant biofilm elimination, gram‐positive and negative bacteria killing, hypoxia alleviation, and intercellular electrical signal conduction, thus accelerating wound healing.

Injectable, rapid self-healing, antioxidant and antibacterial nanocellulose-tannin hydrogels formed via metal-ligand coordination for drug delivery and wound dressing

Nanocellulose-based hydrogels have attracted increasingly attention due to their biocompatibility, biodegradability, and hydrophilic properties. In this work, we proposed a simple route to fabricate composite hydrogels using TEMPO oxidized cellulose nanofibrils (TOCNF) and tannin through metal-ligand coordination. Calcium ions were utilized to rapidly cross-link the carboxyl groups on TOCNF and the tannins' catechol moieties via metal-ligand bonding, resulting in the formation of TOCNF-Ca2+-T composite hydrogels. The incorporation of tannins endowed the hydrogel with high antioxidant and antibacterial properties. The rheological analysis revealed that the addition of tannin led to an improved gel strength of the composite hydrogel. The hydrogel was injectable and could autonomously self-healed in 1 min without any trigger. Tetracycline hydrochloride (TH) was successfully loaded into the composite hydrogels, achieving a maximum encapsulation rate of 97.32%. TOCNF-Ca2+-40%T demonstrated a cumulative drug release of 36% at pH 1.3 and 86% at pH 7.4, indicating its pH-responsive nature. These hydrogels, derived from plant sources, exhibited high antibacterial and antioxidant properties, as well as biocompatibility, rapid self-healing, and injectability, which open up new possibilities for applications in wound dressing and drug delivery.

Antibacterial conductive self-healing hydrogel wound dressing with dual dynamic bonds promotes infected wound healing.

In clinical applications, there is a lack of wound dressings that combine efficient resistance to drug-resistant bacteria with good self-healing properties. In this study, a series of adhesive self-healing conductive antibacterial hydrogel dressings based on oxidized sodium alginate-grafted dopamine/carboxymethyl chitosan/Fe3+ (OSD/CMC/Fe hydrogel)/polydopamine-encapsulated poly(thiophene-3-acetic acid) (OSD/CMC/Fe/PA hydrogel) were prepared for the repair of infected wound. The Schiff base and Fe3+ coordination bonds of the hydrogel structure are dynamic bonds that can be repaired automatically after the hydrogel network is disrupted. Macroscopically, the hydrogel exhibits self-healing properties, allowing the hydrogel dressing to adapt to complex wound surfaces. The OSD/CMC/Fe/PA hydrogel showed good conductivity and photothermal antibacterial properties under near-infrared (NIR) light irradiation. In addition, the hydrogels exhibit tunable rheological properties, suitable mechanical properties, antioxidant properties, tissue adhesion properties and hemostatic properties. Furthermore, all hydrogel dressings improved wound healing in the infected full-thickness defect skin wound repair test in mice. The wound size repaired by OSD/CMC/Fe/PA3 hydrogel+NIR was much smaller (12%) than the control group treated with Tegaderm™ film after 14 days. In conclusion, the hydrogels have high antibacterial efficiency, suitable conductivity, great self-healing properties, good biocompatibility, hemostasis and antioxidant properties, making them promising candidates for wound healing dressings for the treatment of infected skin wounds.

Antibacterial hyaluronic acid hydrogels with enhanced self-healing properties via multiple dynamic bond crosslinking

The self-healing hydrogel offering intrinsic antibacterial activity is often required for the treatment of wounds because it can provide effective wound protection and prevent wound infection. Herein, antibacterial hyaluronic acid hydrogels with enhanced self-healing performances are prepared by multiple dynamic-bond crosslinking between aldehyde hyaluronic acid, 3, 3′- dithiobis (propionyl hydrazide) and fungal-sourced quaternized chitosan. Due to the formation of these different types of reversible interactions e.g. hydrazone bonds, disulfide bonds, and electrostatic interactions, the hyaluronic acid hydrogels can gel rapidly and exhibit excellent self-healing ability, which can heal completely within 1 h. Furthermore, the hydrogels show good antibacterial activity against E. coli and S. aureus with an inhibition ratio of ~100 % and above 75 %, respectively. Additionally, the hydrogels are cytocompatible, which makes them the potential for biomedical applications e.g. cell culture, tissue engineering, and wound dressing.

Polyelectrolyte Complex Hydrogels from Controlled Kneading and Annealing-Induced Tightly Wound and Highly Entangled Natural Polysaccharides.

Hydrogels usually are fabricated by using monomers or preexisting polymers in precursor solutions. Here, a polyelectrolyte complex biohydrogel (Bio-PEC hydrogel) made from a precursor dough, by kneading, annealing, and crosslinking the dough of two oppositely charged polysaccharides, cationic chitosan quaternary ammonium salt (HACC) and anionic sodium hyaluronate (HA), photoinitiator (α-ketoglutaric acid), crosslinker glycidyl methacrylate (GMA), and water of very small quantity is reported. Controlled kneading and annealing homogenized the dough with respect to transforming randomly distributed, individual polymer chains into tightly wound double-stranded structures, which, upon UV irradiation, covalently sparsely crosslinked into a highly entangled network and subsequently, upon fully swollen in water, results in Bio-PEC hydrogel, HACC/HA, exhibiting near-perfect elasticity, high tensile strength, and high swelling resistance. Via the same kneading and annealing, tetracarboxyphenylporphyrin iron (Fe-TCPP) metal nanoclusters are incorporated into HACC/HA to obtain photocatalytic, antibacterial, and biocompatible Bio-PEC hydrogel composite, Fe-TCPP@HACC/HA. Using SD rat models, the efficacy of Fe-TCPP@HACC/HA in inhibiting Escherichia coli (E. coli) growth in vitro and the ability to promote wound healing and scar-free skin regeneration in vivo, or its high potential as a wound dressing material for biomedical applications are demonstrated.

Seconds Timescale Synthesis of Highly Stretchable Antibacterial Hydrogel for Skin Wound Closure and Epidermal Strain Sensor.

Effective wound healing is critical for patient care, and the development of novel wound dressing materials that promote healing, prevent infection, and are user-friendly is of great importance, particularly in the context of point-of-care testing (POCT). This study reports the synthesis of a hydrogel material that can be produced in less than 10 s and possesses antibacterial activity against both gram-negative and gram-positive microorganisms, as well as the ability to inhibit the growth of eukaryotic cells, such as yeast. The hydrogel is formed wholly based on covalent-like hydrogen bonding interactions and exhibits excellent mechanical properties, with the ability to stretch up to more than 600% of its initial length. Furthermore, the hydrogel demonstrates ultra-fast self-healing properties, with fractures capable of being repaired within 10 s. This hydrogel can promote skin wound healing, with the added advantage of functioning as a strain sensor that generates an electrical signal in response to physical deformation. The strain sensor composed of a rubber shell realizes fast and responsive strain sensing. The findings suggest that this hydrogel has promising applications in the field of POCT for wound care, providing a new avenue for improved patient outcomes.

Rapid Synthesis of Robust Antibacterial and Biodegradable Hydrogels via Frontal Polymerization.

Chitosan (CS) is widely used in biomedical hydrogels due to their similarity to extracellular matrix. However, the preparation method of CS-based hydrogel suffers the drawbacks of tedious operation, time-consuming and energy consumption. Thus, there is an urgent need to develop a rapid synthesis pathway towards hydrogels. In this work, we used a modified CS as a cross-linking agent and acrylic acid (AA) as monomer to prepare a hydrogel through frontal polymerization (FP), which facilitates a facile and rapid method achieved in several minutes. The occurrence of pure FP was confirmed via the frontal velocity and temperature profile measurement. In addition, the as-prepared hydrogel shows excellent mechanical strength up to 1.76 MPa, and the Young's modulus (ranging from 0.16 to 0.56 MPa) is comparable to human skin. The degradation mechanism is revealed by the micro-IR images through the distribution of the functional groups, which is attributed to the breakage of the ether bond. Moreover, the hydrogel exhibits excellent degradability, biocompatibility and antibacterial properties, offering great potentials in tissue engineering. We believe this work not only offers a facile and rapid FP method to fabricate a robust degradable hydrogel, but also provides an effective pathway for the investigation of the degradation mechanism at the chemical bond analysis level.

Biomimetic Antibacterial Gelatin Hydrogels with Multifunctional Properties for Biomedical Applications.

A facile novel approach of introducing dopamine and [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide via dopamine-triggered in situ synthesis into gelatin hydrogels in the presence of ZnSO4 is presented in this study. Remarkably, the resulting hydrogels showed 99.99 and 100% antibacterial efficiency against Gram-positive and Gram-negative bacteria, respectively, making them the highest performing surfaces in their class. Furthermore, the hydrogels showed adhesive properties, self-healing ability, antifreeze properties, electrical conductivity, fatigue resistance, and mechanical stability from -100 to 80 °C. The added multifunctional performance overcomes several disadvantages of gelatin-based hydrogels such as poor mechanical properties and limited thermostability. Overall, the newly developed hydrogels show significant potential for numerous biomedical applications, such as wearable monitoring sensors and antibacterial coatings.

Construction and properties of a carbon dots-decorated gelatin-dialdehyde starch hydrogel with pH response release and antibacterial activity

An antibacterial carbon dot hydrogel (GDSS-PCD) was constructed based on gelatin, dialdehyde starch (DS) and carbon dots (S-PCDs). The formation mechanism of GDSS-PCD hydrogels was attributed to the synergistic cross-linking of hydrogen bonds and dynamic covalent bonds. With increasing S-PCD content, the mechanical and rheological properties of GDSS-PCD hydrogels can be improved, and the micropore size becomes denser. GDSS-PCD hydrogels had pH-dependent swelling and degradation behavior, with a high swelling rate under acidic conditions and relatively low swelling under neutral and alkaline conditions. The cumulative release of S-PCDs from the same hydrogel in an acidic environment was higher than that in an alkaline environment, indicating that the GDSS-PCD hydrogel had a pH-dependent controlled release ability. The release behavior of S-PCDs conformed to the first-order kinetic release model (R2 > 0.95), and the release mechanism was related to Fickian diffusion. The synergistic antibacterial mechanism of GDSS-PCD hydrogels against Staphylococcus aureus suggested that bacterial metabolism leads to an acidic culture environment, which releases S-PCDs and destroys the bacterial cell membrane for antibacterial purposes. In GDSS-PCD hydrogels, S-PCDs play the main antibacterial role, and the hydrogel plays a synergistic role in trapping bacteria. Carbon dot hydrogels are promising materials to fulfil the functions of antibacterial and controlled release in the food and biomedical fields.

An Electroconductive and Antibacterial Adhesive Nanocomposite Hydrogel for High-Performance Skin Wound Healing.

Multifunctional hydrogel adhesives inhibiting infections and enabling the electrical stimulation (ES) of tissue reparation are highly desirable for the healing of surgical wounds and other skin injuries. Herein, a therapeutic nanocomposite hydrogel is designed by integrating β-cyclodextrin-embedded Ag nanoparticles (CDAgNPs) in a polyvinyl alcohol (PVA) matrix enhanced with free β-cyclodextrin (CD) and an atypical macromolecule made of β-glucan grafted with hyaluronic acid (HAG). The main objective is to develop a biocompatible dressing combining the electroconductivity and antibacterial activity of CDAgNPs with the cohesiveness and porosity of PVA and the anti-inflammatory, moisturizing, and cell proliferation-promoting properties of HAG. The last component, CD, is added to strengthen the network structure of the hydrogel. PVA/CD/HAG/CDAgNP exhibited excellent adhesion strength, biocompatibility, electroconductivity, and antimicrobial activity against a wide range of bacteria. In addition, the nanocomposite hydrogel has a swelling ratio and water retention capacity suitable to serve as a wound dressing. PVA/CD/HAG/CDAgNP promoted the proliferation of fibroblast in vitro, accelerated the healing of skin wounds in an animal model, and is hemostatic. Upon ES, the PVA/CD/HAG/CDAgNP nanocomposite hydrogel became more efficient both in vitro and in vivo further speeding up the skin healing process thus demonstrating its potential as a next-generation electroconductive wound dressing.

Ocular antibacterial chitosan-maleic acid hydrogels: In vitro and in vivo studies for a promising approach with enhanced mucoadhesion

The aim was to design and evaluate a chitosan-based conjugate providing high mucoadhesiveness and antibacterial activity for ocular infections treatment. Chitosan was conjugated with maleic acid via amide bond formation and infrared spectroscopy. Furthermore, 2,4,6-Trinitrobenzene sulfonic acid (TNBS) allowed characterization and quantification of conjugated groups, respectively. Biocompatibility was tested via hemolysis assay and Hen's Egg-Chorioallantoic membrane test. Characterization of the pH and osmolarity of hydrogels was followed by mucoadhesion assessment utilizing rheology. In addition, antibacterial studies were carried out towards Escherichia coli by broth microdilution test and agar-disk diffusion assay. In vivo studies were carried out following the already established Draize test and determining pharmacokinetic profile of dexamethasone in aqueous humour. The conjugate exhibited a degree of modification of 50.05 % and no toxicity or irritability. Moreover, mucoadhesive properties were enhanced in 2.68-fold and 1.81-fold for elastic and viscous modulus, respectively. Furthermore, rheological synergism revealed the presence of a gel-like structure. Additionally, broth microdilution and agar disk diffusion studies exhibited enhancement in antibacterial activity. Finally, in vivo studies manifested that hydrogels were highly tolerated, evidencing promising characteristics of the developed conjugate. The conjugate presented promising antimicrobial, long lasting mucoadhesive features and highly improved pharmacokinetics, leading to a revolutionizing approach in the treatment of ocular bacterial infections.

Mild hyperthermia-assisted chitosan hydrogel with photothermal antibacterial property and CAT-like activity for infected wound healing

Infected wounds pose a serious threat to public health and pose a significant challenge and financial burden worldwide. The treatment of infected wounds is now an urgent problem to be solved. Herein, mild hyperthermia-assisted hydrogels composed of carboxymethyl chitosan (CMCs), oxidized dextran (Odex), epigallocatechin gallate (EGCG) and PtNPs@PVP (CAT-like nanoenzymes) were proposed for the repair of infected wounds. The incorporation of PtNPs@PVP nanoenzymes give the hydrogels excellent photothermal property and CAT-like activity. When the temperature is maintained at 42–45 °C under 808 nm near infrared (NIR) exposure, the CMCs/Odex/EGCG/Nanoenzymes (COEN2) hydrogel demonstrated highly enhanced antibacterial ability (95.9 % in vivo), hydrogen peroxide (H2O2) scavenging ratio (85.1 % in vitro) and oxygen supply (20.7 mg/L in vitro). Furthermore, this mild-heat stimulation also promoted angiogenesis in the damaged skin area. Overall, this multifunctional hydrogel with antibacterial, antioxidant, oxygen supply, hemostasis, and angiogenesis capabilities has shown great promise in the repair of infected wounds. This study establishes the paradigm of enhanced infected wound healing by mild hyperthermia-assisted H2O2 scavenging, oxygen supplemental, and photothermal antibacterial hydrogels.