Anodic Oxygen Evolution Reaction Research Articles

Electrochemical Oxidation of Small Molecules for Energy‐Saving Hydrogen Production

AbstractElectrochemical water splitting is a promising technique for the production of high‐purity hydrogen. Substituting the slow anodic oxygen evolution reaction with an oxidation reaction that is thermodynamically more favorable enables the energy‐efficient production of hydrogen. Moreover, this approach facilitates the degradation of environmental pollutants and synthesis of value‐added chemicals through the rational selection of small molecules as substrates. Strategies for small‐molecule selection and electrocatalyst design are critical to electrocatalytic performance, with a focus on achieving a high current density, selectivity, Faradaic efficiency, and operational durability. This perspective discusses the key factors required for further advancement, including technoeconomic analysis, new reactor system design, meeting the requirements of industrial applications, bridging the gap between fundamental research and practical applications, and product detection and separation. This perspective aims to advance the development of hybrid water electrolysis applications.

Visualizing Electrochemical CO2 Conversion via the Emerging Scanning Electrochemical Microscope: Fundamentals, Applications and Perspectives.

With the rapid development and maturity of electrochemical CO2 conversion involving cathodic CO2 reduction reaction (CO2RR) and anodic oxygen evolution reaction (OER), conventional ex situ characterizations gradually fall behind in detecting real-time products distribution, tracking intermediates, and monitoring structural evolution, etc. Nevertheless, advanced in situ techniques, with intriguing merits like good reproducibility, facile operability, high sensitivity, and short response time, can realize in situ detection and recording of dynamic data, and observe materials structural evolution in real time. As an emerging visual technique, scanning electrochemical microscope (SECM) presents local electrochemical signals on various materials surface through capturing micro-current caused by reactants oxidation and reduction. Importantly, SECM holds particular potentials in visualizing reactive intermediates at active sites and obtaining instantaneous morphology evolution images to reveal the intrinsic reactivity of active sites. Therefore, this review focuses on SECM fundamentals and its specific applications toward CO2RR and OER, mainly including electrochemical behavior observation on local regions of various materials, target products and onset potentials identification in real-time, reaction pathways clarification, reaction kinetics exploration under steady-state conditions, electroactive materials screening and multi-techniques coupling for a joint utilization. This review undoubtedly provides a leading guidance to extend various SECM applications to other energy-related fields.

Production of H2 and Glucaric Acid Using Electrocatalyst Glucose Oxidation by the Ta NiFe LDH Electrode.

The slow anodic oxygen evolution reaction (OER) significantly limits electrocatalytic water splitting for hydrogen production. We proposed the electrocatalyst for glucose oxidation by Ta-doping NiFe LDH nanosheets to simultaneously obtain glucaric acid (GRA) and hydrogen gas as a useful byproduct. Superior glucose oxidation reaction (GOR) activity is demonstrated by the optimized Ta-NiFe LDH, which has a low overpotential of 192 mV, allowing for a small Tafel slope of 70 mV dec-1 and a current density of 50 mA cm-2. The Ta NiFe LDH-oxidized glucose to GRA with a 72.94% yield and 64.3% Faradaic efficiency at 1.45 VRHE. Herein, we report the Ta NiFe LDH/NF electrode for the GOR&hydrogen evolution reaction (HER), which exhibits a cell voltage of 1.62 V to reach a current density of 10 mA cm-2, which is 250 mV lower compared to OER&HER (1.87 V). This study reveals that GOR is an energy-efficient and cost-effective method for producing H2 and valorizing biomass.

KIr4O8 Nanowires with Rich Hydroxyl Promote Oxygen Evolution Reaction in Proton Exchange Membrane Water Electrolyzer.

The sluggish kinetics for anodic oxygen evolution reaction (OER) and insufficient catalytic performance over the corresponding Ir-based catalysts are still enormous challenges in proton exchange membrane water electrolyzer (PEMWE). Herein, we report that KIr4O8 nanowires anode catalyst with more exposed active sites and rich hydroxyl achieves a current density of 1.0 A/cm2 at 1.68V and possesses excellent catalytic stability with 1230h in PEMWE. Combining in situ Raman spectroscopy and differential electrochemical mass spectroscopy results, we propose the modified adsorbate evolution mechanism that rich hydroxyl in the inherent structure of KIr4O8 nanowires directly participates in the catalytic process for favoring the OER. Density functional theory calculation results further suggest that the enhanced proximity between Ir (d) and O (p) band center in KIr4O8 can strengthen the covalence of Ir-O, facilitate the electron transfer between adsorbents and active sites, and decrease the energy barrier of rate-determining step from OH* to O* during the OER. This article is protected by copyright. All rights reserved.

Efficient Hydrogen Evolution Electrocatalyst: MoN/Ni3N/NF Coupled with Methanol Oxidation Reaction for Formate Production in Alkaline Media

Abstract Electrocatalytic water splitting for hydrogen production is promising, but its practical application is limited by the sluggish kinetics of the anodic oxygen evolution reaction (OER) and the less valuable oxygen by-product. Hence, replacing OER with a thermodynamically favorable methanol oxidation reaction (MOR) and coupling with value-added formate generation on the anode is an energy-saving and effective scheme. In this work, we report a self-supporting bifunctional electrocatalyst MoN/Ni3N/NF, which exhibits excellent hydrogen evolution reaction catalytic activity and stability, requiring overpotentials of only 18 and 68 mV to reach current densities of −10 and −100 mA cm−2, respectively. Moreover, the catalyst’s performance minimally deteriorates after long-standing chronopotentiometry measurements (−100 mA cm−2@150h). When MOR is used instead of OER, the required potential drops by 200 mV to 1.38 V at a current density of 100 mA cm−2 and MoN/Ni3N/NF also demonstrates splendid catalytic stability towards OER and MOR. Finally, a two-electrode system employing MoN/Ni3N/NF as a bifunctional electrocatalyst only requires a cell voltage of 1.40, 1.68 V to achieve current densities of 10 and 100 mA cm−2, respectively. The coupled electrolyzer also exhibits high faradaic efficiency for producing cathodic H2 (100%) and anodic formate (90%).

Crystalline-dependent surface reconstruction at low applied potential region for enhanced oxygen evolution reaction

Alkaline water electrolysis is apreferred technology for large-scale green hydrogen production. For most active transition metal-based catalysts during anodic oxygen evolution reaction (OER), the atomic structure of the anodic catalysts’ surface often undergoes reconstruction to optimize the reaction path and enhance their catalytic activity. The design and maintenance of highly active sites during this reconstruction process remain critical and challenging for most OER catalysts. In this study, we explored the effects of crystal structures in pre-catalysts on surface reconstruction at low applied potential. Through experimental observation and theoretical calculation, we found out that catalysts with specific crystal structures exhibit superior surface remodeling ability, which enables them to better adapt to the conditions of the oxygen evolution reaction and achieve efficient catalysis. The discharge process enables the formation of abundant phosphorus vacancies on the surface, which in turn affects the efficiency of the entire oxygen evolution reaction. The optimized crystal structure of the catalyst results in an increase as high as 58.5 mA/cm2 for Ni5P4, which is twice as high as that observed for Ni2P. These results provide essential theoretical foundations and technical guidance for designing more efficient catalysts for oxygen evolution reactions.

Cobalt telluride regulated by nickel for efficient electrooxidation of 5-hydroxymethylfurfural

Replacing the anodic oxygen evolution reaction (OER) in water splitting with 5-hydroxymethylfurfural oxidation reaction (HMFOR) can not only reduce the energy required for hydrogen production but also yield the valuable chemical 2,5-furandicarboxylic acid (FDCA). Co-based catalysts are known to be efficient for HMFOR, with high-valent Co being recognized as the main active component. However, efficiently promoting the oxidation of Co2+ to produce high-valent reactive species remains a challenge. In this study, Ni-doped CoTe (CoNiTe) nanorods were prepared as efficient catalysts for HMFOR, achieving a high HMFOR current density of 65.3 mA cm−2 at 1.50 V. Even after undergoing five successive electrolysis processes, the Faradaic efficiency (FE) remained at approximately 90.7 %, showing robust electrochemical durability. Mechanistic studies indicated that Ni doping changes the electronic configuration of Co, enhancing its charge transfer rate and facilitating the oxidation of Co2+ to high-valent CoO2 species. This work reveals the effect of Ni doping on the reconfiguration of the active phase during HMFOR.

Integrated Electrolytic Hydrogen Production for Boosting Energy Utilization

AbstractElectrocatalytic water splitting, powered by clean energy sources, represents a sustainable method for hydrogen (H2) production. Although extensive research has concentrated on performance indicators like current density and faradaic efficiency, the widespread adoption of electrocatalytic water splitting encounters challenges primarily due to high cell voltages and electricity costs. These issues stem from the sluggish kinetics of the anodic oxygen evolution reaction (OER). Various efforts to replace sluggish OER with thermodynamically more favorable anodic reactions have been demonstrated as pathbreaking strategies for energy‐efficient H2 evolution. In this concept, we aim to comprehensively explore alternative electrochemical oxidation reactions combined with H2 evolution and propose insights for the future development of cost‐effective integrated electrolysis for H2 production.

S-doped NiCo layered double hydroxides enable efficient and durable methanol oxidation and oxygen reduction reactions for Zn-methanol-air batteries

The employment of alcohol oxidation reactions (AORs) is thermodynamically more favorable to replace the anodic oxygen evolution reaction (OER) in rechargeable Zn-air batteries (ZABs). As a representative AOR-coupled ZAB, Zn-methanol-air battery (ZMAB) gratifyingly delivers a lower charge voltage, higher energy efficiency, longer cycle life and more valuable charge product in comparison with the traditional ZAB. For such emerging ZMABs, it is imperative to explore efficient, stable and cost-effective bifunctional electrocatalysts for both methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR). Herein, sulfur-doped NiCo layered double hydroxides (termed NiCo-LDH@SOH) are fabricated by a room-temperature surface sulfurization route. Remarkably, the NiCo-LDH@SOH heterostructure catalyst achieves a superb bifunctional activity for MOR and ORR, performing a low potential gap ΔE between the Ej10 for MOR and the half-wave potential E1/2 for ORR of only 0.596 V, far surpassing that (0.790 V) for Pt/C-IrO2 benchmark catalyst. The electronic interactions between S2− and transition metal ions significantly accelerate the charge transfer process and generate highly efficient Ni3+ and Co2+ active sites on NiCo-LDH@SOH, which account for the exceptional MOR and ORR performance, respectively. Thanks to the favorable replacement of OER with MOR and the excellent MOR/ORR bifunctional activity of NiCo-LDH@SOH, the ZMAB can output a comparable discharge power density (140 mW cm−2) to the traditional ZAB counterpart (149 mW cm−2), but a much lower charge voltage than the latter. In consequence, the ZMAB demonstrates an extraordinary long-term cyclability of 2880 cycles for 480 h (20 days) with almost no degradation, which is more than 5 times longer than that of the traditional ZAB.

Perovskite for Electrocatalytic Oxygen Evolution at Elevated Temperatures.

The development of advanced electrolysis technologies such as anion exchange membrane water electrolyzer (AEMWE) is central to the vision of a sustainable energy future. Key to the realization of such AEMWE technology lies in the exploration of low-cost and high-efficient catalysts for facilitating the anodic oxygen evolution reaction (OER). Despite tremendous efforts in the fundamental research, most of today's OER works are conducted under room temperature, which deviates significantly with AEMWE's operating temperature (50-80 °C). To bridge this gap, it is highly desirable to obtain insights into the OER catalytic behavior at elevated temperatures. Herein, using the well-known perovskite catalyst Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) as a proof of concept, the effect of temperature on the variation in OER catalytic activity and stability is evaluated. It is found that the BSCF's activity increases with increasing temperature due to enhanced lattice oxygen participation promoting the lattice oxygen-mediated OER process. Further, surface amorphization and cation leaching of BSCF become more pronounced as temperature increases, causing a somewhat attenuated OER stability. These new understandings of the fundamental OER catalysis over perovskite materials at industrial-relevant temperature conditions are expected to have strong implications for the research of OER catalysts to be deployed in practical water electrolyzers.

The formation of unsaturated IrOx in SrIrO3 by cobalt-doping for acidic oxygen evolution reaction

Electrocatalytic water splitting is a promising route for sustainable hydrogen production. However, the high overpotential of the anodic oxygen evolution reaction poses significant challenge. SrIrO3-based perovskite-type catalysts have shown great potential for acidic oxygen evolution reaction, but the origins of their high activity are still unclear. Herein, we develop a Co-doped SrIrO3 system to enhance oxygen evolution reaction activity and elucidate the origin of catalytic activity. In situ experiments reveal Co activates surface lattice oxygen, rapidly exposing IrOx active sites, while bulk Co doping optimizes the adsorbate binding energy of IrOx. The Co-doped SrIrO3 demonstrates high oxygen evolution reaction electrocatalytic activity, markedly surpassing the commercial IrO2 catalysts in both conventional electrolyzer and proton exchange membrane water electrolyzer.

Tuning electrochemical water activation over NiIr single-atom alloy aerogels for stable electrochemiluminescence

The anodic oxygen evolution reaction is a well-acknowledged side reaction in traditional aqueous electrochemiluminescence (ECL) systems due to the generation and surface aggregation of oxygen at the electrode, which detrimentally impacts the stability and efficiency of ECL emission. However, the effect of reactive oxygen species generated during water oxidation on ECL luminophores has been largely overlooked. Taking the typical luminol emitter as an example, herein, we employed NiIr single-atom alloy aerogels possessing efficient water oxidation activity as a prototype co-reaction accelerator to elucidate the relationship between ECL behavior and water oxidation reaction kinetics for the first time. By regulating the concentration of hydroxide ions in the electrolyte, the electrochemical oxidation processes of both luminol and water are finely tuned. When the concentration of hydroxide ions in electrolyte is low, the kinetics of water oxidation is attenuated, which limits the generation of oxygen, effectively mitigates the influence of oxygen accumulation on the ECL strength, and offers a novel perspective for harnessing side reactions in ECL systems. Finally, a sensitive and stable sensor for antioxidant detection was constructed and applied to the practical sample detection.

Artificial Heterointerfaces with Regulated Charge Distribution of Ni Active Sites for Urea Oxidation Reaction.

In contrast to the thermodynamically unfavorable anodic oxygen evolution reaction, the electrocatalytic urea oxidation reaction (UOR) presents a more favorable thermodynamic potential. However, the practical application of UOR has been hindered by sluggish kinetics. In this study, hierarchical porous nanosheet arrays featuring abundant Ni-WO3 heterointerfaces on nickel foam (Ni-WO3/NF) is introduced as a monolith electrode, demonstrating exceptional activity and stability toward UOR. The Ni-WO3/NF catalyst exhibits unprecedentedly rapid UOR kinetics (200mAcm-2 at 1.384V vs. RHE) and a high turnover frequency (0.456s-1), surpassing most previously reported Ni-based catalysts, with negligible activity decay observed during a durability test lasting 150 h. Ex situ X-ray photoelectron spectroscopy and density functional theory calculations elucidate that the WO3 interface significantly modulates the local charge distribution of Ni species, facilitating the generation of Ni3+ with optimal affinity for interacting with urea molecules and CO2 intermediates at heterointerfaces during UOR. This mechanism accelerates the interfacial electrocatalytic kinetics. Additionally, in situ Fourier transform infrared spectroscopy provides deep insights into the substantial contribution of interfacial Ni-WO3 sites to UOR electrocatalysis, unraveling the underlying molecular-level mechanisms. Finally, the study explores the application of a direct urea fuel cell to inspire future practical implementations.

Assembled RhRuFe Trimetallene for Water Electrolysis.

Industrializing water electrolyzers demands better electrocatalysts, especially for the anodic oxygen evolution reaction (OER). The prevailing OER catalysts are Ir or Ru-based nanomaterials, however, they still suffer from insufficient stability. An alternative yet considerably less explored approach is to upgrade Rh, a known stable but moderately active element for OER electrocatalysis, via rational structural engineering. Herein, a precise synthesis of assembled RhRuFe trimetallenes (RhRuFe TMs) with an average thickness of 1nm for boosting overall water splitting catalysis is reported. Favorable mass transport and optimized electronic structure collectively render RhRuFe TMs with an improved OER activity of an overpotential of 330mV to deliver 10mAcm-2, which is significantly lower than the Rh/C control (by 601mV) and reported Rh-based OER electrocatalysts. In particular, the RhRuFe TMs-based water splitting devices can achieve the current density of 10mAcm-2 at a low voltage of 1.63V, which is among the best in the Rh-based bifunctional catalysts for electrolyzers. The addition of Fe in RhRuFe TMs can modulate the strain/electron distribution of the multi-alloy, which regulates the binding energies of H* and OH* in hydrogen and oxygen evolution reactions for achieving the enhanced bifunctional OER and HER catalysis is further demonstrated.

Constructing Chainmail-Structured CoP/C Nanospheres as Highly Active Anodic Electrocatalysts for Oxygen Evolution Reaction.

Constructing highly active and noble metal-free electrocatalysts is significant for the anodic oxygen evolution reaction (OER). Herein, uniform carbon-coated CoP nanospheres (CoP/C) are developed by a direct impregnation coupling phosphorization approach. Importantly, CoP/C only takes a small overpotential of 230 mV at the current density of 10 mA cm-2 and displays a Tafel slope of 56.87 mV dec-1. Furthermore, the intrinsic activity of CoP/C is 21.44 times better than that of commercial RuO2 under an overpotential of 260 mV. In situ Raman spectroscopy studies revealed that a large number of generated Co-O and Co-OH species could facilitate the *OH adsorption, effectively accelerating the reaction kinetics. Meanwhile, the carbon shell with a large number of mesoporous pores acts as the chainmail of CoP, which could improve the active surface area of the catalyst and prevent the Co sites from oxidative dissolution. This work provides a facile and effective reference for the development of highly active and stable OER catalysts.

Constructing CoNi-LDH/Fe MOF/NF Heterostructure Catalyst for Energy-Efficient OER and UOR at High Current Density.

The sluggish kinetics of the oxygen evolution reaction (OER) always results in a high overpotential at the anode of water electrolysis and an excessive electric energy consumption, which has been a major obstacle for hydrogen production through water electrolysis. In this study, we present a CoNi-LDH/Fe MOF/NF heterostructure catalyst with nanoneedle array morphology for the OER. In 1.0 M KOH solution, the heterostructure catalyst only required overpotentials of 275 and 305 mV to achieve high current densities of 500 and 1000 mA/cm2 for OER, respectively. The catalytic activities are much higher than those of the reference single-component CoNi-LDH/NF and Fe MOF/NF catalysts. The improved catalytic performance of the heterostructure catalyst can be ascribed to the synergistic effect of CoNi-LDH and Fe MOF. In particular, when the anodic OER is replaced with the urea oxidation reaction (UOR), which has a relatively lower thermodynamic equilibrium potential and is expected to reduce the cell voltage, the overpotentials required to achieve the same current densities can be reduced by 80 and 40 mV, respectively. The cell voltage required to drive overall urea splitting (OUS) is only 1.55 V at 100 mA/cm2 in the Pt/C/NF||CoNi-LDH/Fe MOF/NF two-electrode electrolytic cell. This value is 60 mV lower compared with that required for overall water splitting (OWS). Our results indicate that a reasonable construction of a heterostructure catalyst can significantly give rise to higher electrocatalytic performance, and using UOR to replace the anodic OER of the OWS can greatly reduce the electrolytic energy consumption.

High-Entropy Carbonates (Ni-Mn-Co-Zn-Cr-Fe) as a Promising Electrocatalyst for Alkalized Seawater Oxidation

Direct seawater splitting has attracted considerable attention as an alternative to conventional alkaline water electrolysis because the former avoids the use of limited freshwater resources. However, several challenges must be overcome to realize direct seawater electrolysis. Most importantly, electrocatalysts for the anodic oxygen evolution reaction (OER) should exhibit high activity, stability, and selectivity in highly corrosive environments with abundant chloride ions. In this study, we developed high-entropy carbonate (HEC) as a promising electrocatalyst for seawater oxidation. In HECs, physicochemical interactions among different elements can effectively suppress the corrosion of OER active sites, while polyanionic CO32- can act as a corrosion-protective species by repelling negatively charged chloride ions during electrolysis. Consequently, HECs demonstrate outstanding catalytic activity, stability, and selectivity for seawater oxidation, surpassing those of ternary, quaternary, and quinary carbonates and even benchmark IrO2 catalysts.

Synergistic sulfur-doped tri-metal phosphide electrocatalyst for efficient hydrazine oxidation in water electrolysis: Toward high-performance hydrogen fuel generation

Replacing the slow anodic oxygen evolution reaction with the hydrazine (N2H4) oxidation reaction (HzOR) is a promising strategy for achieving energy-efficient hydrogen (H2) fuel production in water electrolyzer systems. Therefore, developing efficient electrocatalysts for the HzOR, in combination with the cathodic hydrogen evolution reaction, is essential for achieving high H2 fuel generation rates and advancing N2H4 fuel cell technology. In this study, we fabricated NiCoFe oxide derived from a metal-organic framework, followed by the physical mixing and carbonization of S and P. The strong intrinsic activity of S-doped tri-metal phosphide (TMP) against the HzOR is evidenced by its role in the chemisorption of N2H4 on its surface, where a dative link is formed between the electrons of the lone pair of nitrogen atoms in N2H4 and the empty orbitals of the metals in the TMP alloy. Using this process, we demonstrated the high performance of flow cell electrolysis for overall water and hydrazine oxidation by assembling the S-TMP||S-TMP electrode as both the anode and cathode of the electrolyzer. The resulting cell voltage was 0.35 V for HzOR and 1.53 V for overall water splitting, and the electric current density reached 10 mA·cm−2, with high stability over 20 h. The electrolyzer efficiency was significantly superior to that of electrolyzers constructed using other types of dual-purpose electrocatalysts as catalyst pairs. Furthermore, the overall effectiveness of the electrolyzer was comparable to that of electrolyzers incorporating two distinct, well-established, single-purpose electrocatalyst pairs for the water and hydrazine splitting reactions.

Polyol-assisted efficient hole transfer and utilization at the Si-based photoanode/electrolyte interface

The sluggish kinetics of the anodic oxygen evolution reaction significantly restricts the efficiency of silicon (Si)-based photoelectrochemical (PEC) cells. In this study, we employ microfabrication technology to batch-prepare reproducible Si substrates, and develop a facile electrodeposition technique to load high-quality nickel film onto the substrates. Innovatively, we introduce energetically favorable polyols (such as glycerol, propylene glycol, and ethylene glycol) into the electrolyte, resulting in a remarkably low onset potential and a high hole injection efficiency during the PEC oxidation process. Taking glycerol as an example, in-situ impendence spectra provide real-time evidence for the accelerated hole transfer and utilization at the photoanode/electrolyte interface in the presence of glycerol. Mechanistic studies further reveal that glycerol undergoes synergistic oxidation mediated by holes and catalysts. Finally, by intergrating a solar thermoelectric generator into a PEC polyol oxidation cell, the self-powered system demonstrates promising potential for producing valuable products solely by harnessing solar energy.

Stabilizing Highly Active Ru Sites by Electron Reservoir in Acidic Oxygen Evolution.

Proton exchange membrane water electrolysis is hindered by the sluggish kinetics of the anodic oxygen evolution reaction. RuO2 is regarded as a promising alternative to IrO2 for the anode catalyst of proton exchange membrane water electrolyzers due to its superior activity and relatively lower cost compared to IrO2. However, the dissolution of Ru induced by its overoxidation under acidic oxygen evolution reaction (OER) conditions greatly hinders its durability. Herein, we developed a strategy for stabilizing RuO2 in acidic OER by the incorporation of high-valence metals with suitable ionic electronegativity. A molten salt method was employed to synthesize a series of high-valence metal-substituted RuO2 with large specific surface areas. The experimental results revealed that a high content of surface Ru4+ species promoted the OER intrinsic activity of high-valence doped RuO2. It was found that there was a linear relationship between the ratio of surface Ru4+/Ru3+ species and the ionic electronegativity of the dopant metals. By regulating the ratio of surface Ru4+/Ru3+ species, incorporating Re, with the highest ionic electronegativity, endowed Re0.1Ru0.9O2 with exceptional OER activity, exhibiting a low overpotential of 199 mV to reach 10 mA cm-2. More importantly, Re0.1Ru0.9O2 demonstrated outstanding stability at both 10 mA cm-2 (over 300 h) and 100 mA cm-2 (over 25 h). The characterization of post-stability Re0.1Ru0.9O2 revealed that Re promoted electron transfer to Ru, serving as an electron reservoir to mitigate excessive oxidation of Ru sites during the OER process and thus enhancing OER stability. We conclude that Re, with the highest ionic electronegativity, attracted a mass of electrons from Ru in the pre-catalyst and replenished electrons to Ru under the operating potential. This work spotlights an effective strategy for stabilizing cost-effective Ru-based catalysts for acidic OER.