Anode Material Research Articles

Metal organic framework derived heteroatom doped porous carbon nanocubes enable efficient charge storage in a lithium-ion capacitor

Lithium-ion capacitors (LICs) are regarded as one of the promising technologies towards realizing energy & power dense energy storage systems. However, their energy densities at higher power densities are still limited due to the discrepancy between electrode kinetics of capacitor-like cathode and battery-like anode. Developing carbon materials with well-defined structures, porosity to match the chemical kinetics between electrodes are the major challenges to overcome. In the present work, we have devised a strategy to fabricate S, N dual-doped porous carbon nanocubes (S, N-PCNs) using zeolitic imidazole framework (ZIF)-8 precursors, and employed the PCNs as anode material in LICs. With its well-defined structure, hierarchical porous nature, and abundant heteroatom presence (1.9 % S, 16.2 % N), the pre-lithiated S, N-PCNs based anode has offered a greatly improved reversible storage capacity of ∼930 mAh g−1 at 0.1 A g−1 along with an impressive rate capability and cycling life. When S, N-PCNs anode is paired with activated carbon cathode, the 4 V dual-carbon LIC yields an energy density as high as 120.24 Wh kg−1 and 10.2 kW kg−1 of power density with a good cycle stability of 90.6 % after 5000 charge-discharge cycles. This work would open new scopes of exploring metal-organic framework derived heteroatom-doped porous carbons to make metal-ion capacitors more efficient.

NiCo2S4 nanoparticles encapsulated within hollow mesoporous carbon spheres enabling rapid and stable sodium storage

Poor rate capability and cycling performance significantly impair the utilization of NiCo2S4 as an anode material in sodium-ion batteries. Herein, hollow mesoporous carbon spheres (HMCSs) are synthesized using a hard-template method. NiCo2S4 nanoparticles with sizes ranging from 15 to 43 nm are grown in-situ within HMCSs (NiCo2S4@HMCS) by melt adsorption, solution impregnation, and gas-phase sulfurization. Specifically, NiCo2S4 nanoparticles are uniformly distributed on the inner walls of HMCSs and within the mesoporous channels of spherical shells. In half-cells, NiCo2S4@HMCS exhibits reversible capacities of 482 mAh g−1 after 340 cycles at 1.0 A g−1, 340 mAh g−1 after 600 cycles at 5.0 A g−1, and 271 mAh g−1 after 700 cycles at 10.0 A g−1. In NiCo2S4@HMCS//Na3V2(PO4)3 full-cells, NiCo2S4@HMCS maintain reversible capacities of 203 mAh g−1 after 1200 cycles at 1.0 A g−1 and 122 mAh g−1 after 2000 cycles at 5.0 A g−1. The unique nano-encapsulated structure prevents the detachment of NiCo2S4 from HMCSs, maintaining electrochemical activity and stability of NiCo2S4. Additionally, the nano-encapsulated structure also facilitates electrolyte penetration and enhances the electronic conductivity of NiCo2S4. These effects synergistically result in rapid and stable sodium storage performance.

Edge‑nitrogen/sulfur co-doping boost high potassium ion storage of carbon nanosheet anode materials

Potassium-ion batteries (PIBs) have garnered considerable attention as a potential alternative to lithium-ion batteries. However, the larger radius of K+ poses challenges, including slow kinetic processes and significant volume changes, which adversely affect the rate performance and cycling stability of electrode materials. Herein, N, S co-doped carbon nanosheets (xNS-HC) are synthesized as anode materials of PIBs by carbonization of citric acid and CH₄N₂S precursors in LiCl/KCl molten salts. Of these, 5NS-HC possesses a high N content of 20.19 at.% with 90.90 % of edge N-species and a S content of 2.53 at.%. The 5NS-HC material exhibits a high specific K+ storage capacity of 368.2 mAh g−1 at 0.1 A g−1, superior rate capability (106.1 mAh g−1 at 10 A g−1), and long-term cycling stability (205.8 mAh g−1 after 2800 cycles at 1 A g−1). In-depth analysis via in-situ XPS and DFT calculations reveals that the active sites doped with edge-N/S exhibit a profound affinity towards K+, thus contributing to the outstanding electrochemical K+ storage performance observed in 5NS-HC. The full cell of K0.4Mn0.9Li0.1O2·0.33H2O||5NS-HC exhibits a high specific capacity of 141.2 mAh g−1, supporting a high energy density of 147.1 Wh kg−1. These compelling results illustrate that edge-N/S co-doping can significantly enhance the K+ storage of carbon anode materials.

Simultaneous electrochemical removal of three microcystin congeners and sulfamethoxazole in natural water

Microcystins (MCs), frequently detected in freshwater ecosystems, have raised significant human health and ecological concerns. New approaches are being developed to control and remove MCs. In this study, we examined factors influencing the efficacy of electrochemical oxidation as a means of control. Anode material (Pt/Ti, Ta2O5-IrO2/Ti, SnO2-SbO2/Ti, boron-doped diamond (BDD)/Si), anode surface area ratios and solution volumes, initial pollutant concentrations, and the co-existing antibiotic sulfamethoxazole (SMX) were investigated. MCs and SMX were dissolved in filtered Taihu Lake water to simulate the natural aquatic environment. The results showed that non-active anodes, lower initial concentration of MC, larger surface area ratio of anode to cathode, and smaller ratio of reaction solution volume to anode surface area could promote the degradation target pollutants. Under optimal conditions in this study, the degradation rates of MC-LR, MC-YR, MC-RR, and SMX each reached more than 90% within 6 hours, and the removal efficiency of MC-YR was the highest among three congeners. The effect of SMX on the degradation of MC congeners depended mainly on their concentration differences, such that when the initial concentration of SMX was one to two orders of magnitude lower than microcystin, the presence of SMX would promote the degradation of MCs. In contrast, when the initial concentration of SMX was higher than that of microcystin by approximately an order of magnitude, sulfamethoxazole would inhibit the degradation of MCs by between 4.6% and 24.5%. Ultra-high-performance liquid chromatography tandem mass spectrometry analysis revealed that the three MC congeners were electrochemically degraded through aromatic ring oxidation, alkene oxidation, and bond cleavage on the ADDA (3-amino-9-methoxy-2,6,8-trimethyl-10-phenyldeca-4,6-dienoic acid) side chain. Notably, the removal of MCs was accompanied by a decline in the hardness of the reaction water. This study provided insights into electrochemical degradation of microcystins and antibiotics in natural water, offering suggestions for its practical application.

Electrochemical performance of three-dimensional porous Sn/Cu3Sn/CuO/SnO composite as anode material for lithium-ion batteries

Sn is used as an anode material in lithium-ion batteries due to its high theoretical capacity, conductivity, and safety. However, due to the huge volume change during charging and discharging, it suffers serious mechanical degradation, and the capacity rapidly decays. In this study, a simple and feasible strategy was used to electroplate Sn on Cu foam, followed by heat treatment to obtain Sn composite anodes (Sn/Cu3Sn/CuO/SnO). The composite anode served to mitigate the volumetric expansion that was a consequence of the lithiation–delithiation process. It also prevented electrode pulverization and ensured that the overall integrity of the electrode was maintained, thereby enhancing its electrochemical performance. The capacity of the electrode reached 653.56 mAh/g at a current density of 0.2 C after 300 charge-discharge cycles. Thus, the prepared composite materials had a high capacity and long-term cyclic stability.

External ligand-free nickel-catalyzed synthesis of polypyrazines towards stable, high-capacity and low-potential sodium ion storage

Sodium ion batteries (SIBs) have been regarded as a promising alternative to lithium-ion battery owing to low cost and good sustainability, but its competitiveness in energy storage is still limited largely by the development of suitable electrode materials. Traditional inorganic anode materials for SIBs face the problems of sluggish electrochemical kinetics and large volume strain due to the insertion/extraction of large size Na+. By comparison, organic anodes have the advantages of abundance resources, renewability, and designability, but suffer from the lack of stable electrode materials with both high specific capacity and low redox potential. Here, a class of pyrazine rings-rich organic polymers (polypyrazines) were designed and synthesized through external ligand-free nickel-catalyzed carbon–carbon coupling reactions. Among them, poly(2,6-pyrazine) shows the lowest synthetic cost, the highest porosity and the best conductivity. Consequently, as the anode of SIBs, poly(2,6-pyrazine) delivers a low redox potential (about 1 V, vs Na+/Na), high-specific-capacity (617.2 mA h/g at 0.1 A/g), excellent rate-capability (300 mA h/g at 10 A/g) and long-term cycling stability (81 % after 1000 cycles at 1.0 A/g). The low preparation cost and outstanding electrochemical performance of poly(2,6-pyrazine) make it a promising anode candidate for further boosting the energy density of SIBs.

Fast kinetics for lithium storage rendered by Li3VO4 nanoparticles/porous N-doped carbon nanofibers

Li3VO4 (LVO) has been recognized as an alternative anode material for lithium-ion batteries (LIBs) because of its appropriate lithium storage potential and capacity merits. However, its practical application is seriously hindered by slow reaction kinetics stemming from poor electronic conductivity. Herein, Li3VO4/porous N-doped carbon nanofibers (LVO/PNC NFs) are firstly designed and fabricated via an electrospinning method, utilizing the thermal decomposition characteristics of polylactic acid (PLA). The porous N-doped carbon nanofibers provide efficient electrolyte diffusion paths and facilitate ion transport. In addition, LVO nanoparticles are uniformly dispersed along the nanofibers to effectively inhibit particle aggregation. The obtained LVO/PNC NFs are evaluated as anodes for LIBs and deliver high reversible capacity of 768 mAh g−1 after 300 cycles at 0.2 A g−1, along with excellent rate capability (average capacity of 355 mAh g−1 at 8 A g−1 after 6 periodic rate testing) and long cycling life (286 mAh g−1 after 2000 cycles at 4 A g−1). The special porous nanofiber represents an effective strategy for improving the electronic conductivity, inhibiting particle aggregation, and ensuring rapid ion/charge transport towards advanced energy storage technologies.

Structural regulation of 1T-MoS2/Graphene composite materials for high-performance lithium-ion capacitors

Heterogeneous composite structures are considered an effective strategy by utilizing the advantages of heterogeneous components. However, the relationship between structural modifications and electrochemical performance remains inadequately understood. In this study, we leveraged DFT calculations to elucidate the key advantages of the 1T-MoS2/Gr heterostructure, including its exceptional electrical conductivity, enhanced Li+ adsorption capabilities, and improved Li+ diffusion kinetics. To synthesize the 1T-MoS2/Gr composite, we developed a facile, one-step hydrothermal method using glucose as a reducing agent, achieving an optimal heterostructure that maximized the synergistic properties of the components. By comparing different levels of graphene content, the relationship between structural regulation and electrochemical performance has been studied, and a remarkably significant heterostructure composite material (1T-MoS2/Gr-0.8) was identified. As the anode material for lithium-ion batteries (LIBs), 1T-MoS2/Gr-0.8 presents excellent cycle performance with 467 mAh g−1 under the condition (0.5 A g−1, 600 cycles). Simultaneously, when assembling the lithium-ion capacitor (LIC) device with an activated carbon (AC) cathode, even at a high power density of 11.7 kW kg−1, the energy density of the 1T-MoS2/Gr-0.8//AC LIC is as high as 137.0 Wh kg−1. Moreover, the capacity retention rate remains at 89.9 % even after 2000 cycles at 2 A g−1, demonstrating its candidacy as a high-performance anode material for LICs.

Cu2SnS3/rGO nanocomposites with optimized pore structure for high-performance lithium-ion batteries

Developing advanced anode materials is essential for enhancing the rate performance and stability of lithium-ion batteries (LIBs), which is critical for meeting the demands for next-generation energy storage solutions. In this research, Cu2SnS3/rGO nanocomposites were synthesized via a rapid microwave-assisted one-step method, followed by post-synthetic annealing. The incorporation of reduced graphene oxide (rGO) not only significantly improves its electrical conductivity, but also effectively inhibits the agglomeration of CTS nanoparticles. The nanocrystal size in the CTS/rGO nanocomposites has been dramatically downsized, transitioning from the pristine CTS dimensions of 0.9–1.5 μm to a mere 100 nm. This downsizing is a critical advancement in the electrode, as it enhances the surface area and reactivity of the composite. The subsequent high-temperature annealing process shrinks the pore size in the CTS/rGO nanocomposite, decreasing from an average of 42.13 nm to a more confined range of 7.81 to 8.77 nm, depending on the annealing temperatures. Electrochemical testing reveals that the CTS/rGO-A nanocomposite annealed at 300 °C exhibits superior electrochemical performance to the unmodified CTS and non-annealed CTS/rGO composite. The performance is evidenced by an initial capacity of 1856.97 mAh g−1 at a current density of 1 A g−1 and retains a capacity of 1250.32 mAh g−1 after 500 cycles. To elucidate the underlying mechanisms governing the lithium ion diffusion kinetics, capacitance and diffusion behavior of the CTS/rGO-A electrode, advanced techniques such as galvanostatic intermittent titration technique (GITT) and rate cyclic voltammetry (CV) were utilized. These analyses revealed that the synergistic effect of an increased Li+ diffusion coefficient (DLi+), coupled with a notable capacitive contribution, is demonstrated to the enhanced electrochemical performance observed. Furthermore, the COMSOL Multiphysics simulation also indicates improved structural stability of CTS/rGO-A, attributed to minimized stress from volume expansion during discharge. The CTS/rGO-A nanocomposites, featuring enhanced electrochemical performance, coupled with a straightforward and efficient fabrication method, emerge as a promising material for scalable and practical energy storage solutions.

Advances in the Application of Graphene in Lithium-ion Batteries

The search for effective energy storage options has escalated due to the rising global energy demands and environmental concerns. Lithium-ion batteries (LIBs) emerge as a key technology. However, the performance of traditional LIBs still needs to be improved. Therefore, choosing new nanomaterials for the modification of LIBs has become an effective solution. Graphene, as a nanomaterial, is an excellent candidate material for modification. This paper delves into the application of graphene in enhancing the performance of LIBs. Graphene, with its superior electrical conductivity and substantial specific surface area, offers the potential to enhance the performance of both anode and cathode materials in LIBs. This can lead to significant improvements in the overall cycle life, energy density, and power density of these batteries. This work emphasizes the application of graphene in cathode and anode materials. In cathode materials, the layered structure of graphene enables lithium-ion with high theoretical capacity. Meanwhile, graphene helps improve the electron and lithium ion mobility of anode materials. Despite the promising developments, challenges such as lithium loading capacity and coulombic efficiency still remain. The continued exploration of graphene applications is expected to drive LIBs to unprecedented performance metrics. This is in line with the global quest for sustainable and efficient energy storage technologies.

Poly(3, 4-Ethylenedioxythiophene) as Promising Energy Storage Materials in Zinc-Ion Batteries.

Benefiting from the advantages of high conductivity and good electrochemical stability, the conjugated conducting polymer poly (3, 4-ethylenedioxythiophene) is a promising energy storage material in zinc-ion batteries. Zinc-ion batteries have the advantages of high safety, environmental friendliness, and low cost, but suffer from unstable cathode material structure, poor electrical conductivity, and uncontrollable dendritic growth of zinc anodes. PEDOT, with its fast electrochemical response and wide potential window, is expected to make up for the shortcomings and enhance capacity and cycle life of zinc-ion batteries. Herein, in this review different polymerization methods of poly (3, 4-ethylenedioxythiophene) as well as their structure and properties are summarized; the progress in doping strategies related to the increasing conductivity and dispersivity of poly (3, 4-ethylenedioxythiophene) materials is discussed; specific applications of poly (3, 4-ethylenedioxythiophene)-based materials in anode, cathode, electrolyte, and binder of zinc-ion batteries are explored; and the representative advancements for improving the electrochemical performance of poly (3, 4-ethylenedioxythiophene) in zinc-ion batteries are emphasized. Finally, the current challenges of poly (3, 4-ethylenedioxythiophene) as promising materials in zinc-ion batteries and an insight into their future research directions are pointed out.

Innovative Multielement Modification of Pitch-Derived Two-Dimensional Carbon Nanosheets as Anodes for Superior Performance Sodium-Ion Batteries.

The development of advanced anode materials for sodium-ion batteries (SIBs) using pitch-based carbon materials has the advantages of low cost, high electrical conductivity and easy structural modification. In this research, various well-established modification techniques for petroleum pitch are integrated, including the use of recrystallized NaCl as molten salt template, pretreatment and high-temperature carbonization under a pure oxygen atmosphere, and the introduction of heteroatoms (N and S) by hydrothermal methods. The resulting two-dimensional carbon nanosheets with multielement modification exhibit enhanced Na+ storage properties, thereby bringing higher cycling stability and superior rate performance. Due to its specific structure and chemical composition, NS-P-OPDC exhibited a high reversible capacity of 406.77 mAh g-1 at a current density of 100 mA g-1 and a superior rate performance of 193.20 mAh g-1 at a current density of 3 A g-1 after being applied to the anode of SIB half-cell. Especially, a capacity retention of 97.7% was still achieved after 4000 cycles. Meanwhile, the full-cell assembled by Na3V2(PO4)3 (NVP) cathode and NS-P-OPDC anode could provide a reversible capacity of 235.30 mAh g-1 at a current density of 300 mA g-1. This application proves to advance petroleum pitch-based high-performance electrodes toward greater efficiency in electrochemical energy storage.

First‐Principles Calculation of SnSe2 Material as Anode Material of Zinc Ion Battery

ABSTRACTThe development of high‐performance ion battery anode materials is conducive to the rapid development of urban rail transit. Based on first‐principles calculations, this paper studies the potential performance of the recently discovered two‐dimensional material SnSe2 as a negative electrode for zinc ion batteries. By calculating the adsorption energy, the most stable adsorption configuration of Zn was determined. The band gap of intrinsic SnSe2 decreases after strain, which promotes the transition of carriers. The band gap opens after the strain occurs in the Zn adsorbed SnSe2 system (Zn‐SnSe2), which confirms the regulation of strain on the band gap. The lowest diffusion barrier of Zn is 0.083 eV. The theoretical zinc storage capacity is calculated to be 387.550 mAh/g. The calculation results provide theoretical parameters for the application of SnSe2 in ion batteries.

Machine learning descriptors for crystal materials: applications in Ni-rich layered cathode and lithium anode materials for high-energy-density lithium batteries

Lithium batteries have revolutionized energy storage with their high energy density and long lifespan, but challenges such as energy density limitations, safety, and cost still need to be addressed. Crystalline materials, including Ni-rich cathodes and lithium anodes, play pivotal roles in the performance of high-energy-density lithium batteries. Understanding the micro-scale behavior and degradation mechanisms of these materials is crucial for improving macro-scale battery performance. Simulation methods, particularly machine learning (ML) techniques, have become indispensable tools in elucidating these intricate processes because of great efficiency and acceptable accuracy. ML methods depend on descriptors, which bridge the gap between crystal structures and input matrices of models. These descriptors encode essential atomic-level details in crystal structures, enabling predictions of material properties and behaviors relevant to lithium batteries. This paper reviews and discusses the diverse array of descriptors employed in the simulation of crystalline materials for lithium batteries with high energy density. Case studies highlight the effectiveness of different descriptors in simulating cathode behaviors such as Li/Ni disordering, screening of stable LiNi0.8Co0.1Mn0.1O2 (NMC811) configurations, and lithium deposition behaviors at the anode interface. The discussed descriptors can also be applied to other crystalline cathode, anode, and electrolyte materials in lithium batteries and advance the development of lithium batteries with superior energy density.

A Facile Two-Step Utilization of Sorghum Waste Derived Activated Carbon

Sorghum (Sorghum bicolor (L.) Moench) is an agricultural commodity that produces waste, including stems, during its cultivation. Sorghum stems can be used as an alternative precursor for forming activated carbon (AC) with a high surface area by utilizing ZnCl2 as an activator and followed by a pyrolysis process at 750 °C under N2 gas. In this study, AC from sorghum stems was sequentially used as an adsorbent for heavy metals in wastewater, as well as applied as an anode material for lithium-ion batteries. From the characterization analysis, the synthesized AC has an amorphous structure, a high carbon content of > 90%, and a surface area of 1189 m2/g. AC was applied to adsorb 10, 50, and 100 ppm of metal cobalt (Co) at 30 °C. The adsorption isotherm and kinetics of metal Co showed an adsorption capacity of around 28.2 mg/g. The Langmuir isotherm model also describes Co adsorption and follows the pseudo-first-order equation. As for the Li-ion anode material, the ACs material is fabricated on a cylindrical battery with LiNi0.8Co0.1Mn0.1O2 as the counter cathode material. The specific discharge capacity results are 104 mAh/g at the voltage window of 2.7-4.3 V. The sequential utilization of sorghum stem-derived activated carbon can improve the product’s sustainability, and such an approach is promising to be applied in other biomass-based waste treatments.Keywords: Activated carbon, adsorption, battery, biomass, sorghum

Synergistic Bimetallic Effects of BiSb Anodes Enable Long‐Stable Sodium Storage

AbstractAlloy‐type anodes are of interest for their resource‐rich and high theoretical capacity performance in sodium‐ion batteries (SIBs). However, severe volume expansion may lead to rapid capacity decay and electrode pulverization. In this work, metallic Bi with better structure stability is rationally selected as a skeleton to form a 2D BiSb alloy to alleviate the volume expansion. Interestingly, by combining in‐situ XRD and ex‐situ TEM characterizations, a reversible multi‐step alloying sodium storage mechanism of BiSb ↔ Na(Bi, Sb) ↔ Na3(Bi, Sb) in Bi0.4Sb0.6 anode is elucidated, and the partial amorphization and expanded interlayer spacing of BiSb alloy is also revealed, which greatly alleviate volume expansion thereby enhancing electrochemical stability. Furthermore, density functional theory and kinetic calculations demonstrate that Bi0.4Sb0.6 demonstrates lower Na+ adsorption energy and Na+ diffusion energy barriers, ensuring fast electron and ion transportation during sodium storage. Benefiting from the synergistic effects of binary alloy, Bi0.4Sb0.6 exhibits a high reversible capacity and cycling stability of 446 mAh g−1 at 0.1 A g−1, and 70% high capacity after 1100 cycles at 0.5 A g−1. This work provides new insights and opportunities to develop advanced precise alloy‐type anode materials for SIBs.

First-principles study on the lithiation process of amorphous SiO anode for Li-ion batteries with Bayesian optimization.

Amorphous silicon monoxide (a-SiO), which contains Si atoms with various valence states, has attracted much attention as a high-performance anode material for lithium (Li) ion batteries (LIBs). Although current experiments have provided some information during charge/discharge cycles, further investigation of structural changes at the atomic scale is needed. To investigate the lithiation process of a-SiO using first-principles simulations and machine learning techniques, we developed a computational code employing Bayesian optimization to efficiently identify stable sites for Li insertion in the large search-space of amorphous models to reproduce the actual lithiation process and compared this approach to the conventional random scheme by applying it to an a-SiO model previously generated with neural network potentials. The lithiation process based on Bayesian optimization resulted in lower formation energies compared to the conventional random scheme, indicating a more stable structure. During lithiation, Li atoms tended to enter the silicon (Si) phase after the SiO2 phase, in agreement with experimental results. We analyzed the structural changes and observed significant differences in the structural evolution between the conventional and new schemes. Our study highlights the significant influence of the lithiation process on the structural transformation of a-SiO materials, which in turn affects the reversible capacity of the material. These findings will provide a framework for improving the performance and lifetime of a-SiO materials.

Electrochemical Impedance Spectroscopy Study of Ceria- and Zirconia-Based Solid Electrolytes for Application Purposes in Fuel Cells and Gas Sensors

In this study, the structural and electrochemical properties of commercial powders of the nominal compositions Ce0.8Gd0.2O1.9, Sc0.1Ce0.01Zr0.89O1.95, and Sc0.09Yb0.01Zr0.9O1.95 were investigated. The materials are prospective candidates to be used in electrochemical devices, i.e., gas sensors and fuel cells. Based on a comparison of the EIS spectra in different atmospheres (synthetic air, 3000 ppm NH3 in argon, 10% H2 in argon), the reactions on the three-phase boundaries were proposed, as well as the conduction mechanisms of the electrolytes were described. The Ce0.8Gd0.2O1.9 material is a mixed ionic–electronic conductor, which makes it suitable for anode material in fuel cells. Moreover, it exhibits an apparent and reversible response for ammonia, indicating the possibility of usage as an NH3 gas-sensing element. In zirconia-based materials, electrical conduction is realized by oxygen ion carriers. Among them, the most promising from an applicative point of view seems to be Sc0.09Yb0.01Zr0.9O1.95, showing a high, reversible reaction with hydrogen.

Coordination Regulation Strategy in Fabricating Bi2S3@CNFs Composites with Uniform Dispersion for Robust Sodium Storage.

To solve large volume change and low conductivity of Bi2S3-based anodes, a coordination regulation strategy is proposed to prepare Bi2S3 nanoparticles dispersed in carbon fiber (Bi2S3@CNF) composites. It has been discovered that introducing trimesic acid as a ligand can significantly improve the loading and dispersion of Bi3+ in polyacrylonitrile fibers. The results exhibit that Bi2S3 nanoparticles of 200-300 nm are uniformly anchored on the superficial surface layer of CNFs, and Bi2S3 nanoparticles of about 20 nm are evenly dispersed in the interior of CNFs. Assessed as sodium-ion batteries' anode material, the discharge capacity of the Bi2S3@CNF anode in the second cycle is 669.3 mAh g-1 at 0.1 A g-1 and still retains 620.2 mAh g-1 after 100 cycles, with the capacity retention rate of 92.7%. Even at 0.5 A g-1, the specific capacity of the second cycle is 432.99 mAh g-1, which still keeps 400.9 mAh g-1 after 800 cycles, with a retention rate of 92.5%. The excellent cycle stability is mainly attributed to the uniform distribution of small Bi2S3 nanoparticles in CNFs providing abundant active sites, preventing side reactions, relieving volume expansion, improving the electrical conductivity, and accelerating the electrochemical reaction kinetics.

A Bandgap‐Tuned Tetragonal Perovskite as Zero‐Strain Anode for Potassium‐Ion Batteries

AbstractPIBs are emerging as a promising energy storage system due to high abundance of potassium resources and theoretical energy density, however, progress of PIBs is severely hindered by structural instability and poor cycling of anode material during continual insertion and extraction of larger‐sized K+. Hence, developing anode material with structural stability and stable cycling remains a great challenge. Herein, band gap‐tuned Mo‐doped and carbon‐coated lead titanate (CMPTO) with zero‐strain K+ storage is presented as ultra‐stable PIBs anode. Mo doping introduces narrowed band gap and optimized crystal lattice for enhanced intrinsic electron and ion transfer. Demonstrated by in situ XRD characterizations, the crystal structure stays stable with unchanged peak positions, fully revealing zero‐strain characteristic of CMPTO anode during potassium storage for stable cyclic capability. Ultimately, CMPTO anode achieved ultra‐stable cycling performance of 7000 cycles at 500 mA g−1 with high capacity retention of 90 % and considerable specific capacity of 130.9 mAh g−1 after 600 cycles at 100 mA g−1; with relatively large density, CMPTO realized eminent volumetric capacity of 1111.09 mAh cm−3 and ultra‐long cycling life of 10000 cycles at 7041 mA cm−3. This work introduces a promisingly new route into developing anode materials with ultra‐stable performance for PIBs.