Anode For Batteries Research Articles

In situ catalyzed growth of carbon nanotube with asphalt cladding as a bicarbon synergistic framework of silicon anodes for lithium-ion batteries.

Silicon, as the most promising advanced anode material for lithium-ion batteries, faces challenges in large-scale industrial production due to the significant volume expansion effect. In this investigation, Si/CNTs/C composite materials were effectively produced through high-temperature carbonization utilizing asphalt, silicon, hexahydrate ferric chloride, and melamine as primary elements. The distinctive dual-carbon framework of asphalt-derived carbon and carbon nanotubes alleviates the volume expansion of silicon, thereby stabilizing the composite material's structure. Testing the electrochemical performance reveals that the Si/CNTs/C composite material exhibits a reversible specific capacity of 1187 mAh g-1 with a capacity retention rate of 92.6% after 150 cycles at a current density of 0.2 A g-1. Even after 500 cycles at a current density of 1 A g-1, it sustains a specific capacity of 879.4 mAh g-1 with a capacity retention rate of 87.9%, showcasing outstanding electrochemical performance.

Cell-Shearing Chemistry Directed Closed-Pore Regeneration in Biomass-Derived Hard Carbons for Ultrafast Sodium Storage.

The closed-pore structure of hard carbons holds the key to high plateau capacity and rapid diffusion kinetics when applied as sodium-ion battery (SIB) anodes. However, understanding and establishing the structure-electrochemistry relationship still remains a significant challenge. This work, for the first time, introduces an innovative deep eutectic solvent (DES) cell-shearing strategy to precisely tailor the cell structure of natural bamboo and consequently the closed-pore in its derived hard carbons. The DES shearing force effectively modifies the pore architecture by simultaneously shearing and dissolving amorphous components to form closed pore cores with adjustable sizes, as well as disintegrating crystalline cellulose through generation of competing hydrogen bonds to elaborately tune the pore wall thickness and ordering. The optimized closed-pore structure featuring appropriate pore size (∼2 nm) and ultra-thin (1-3 layers) disordered pore walls, exhibits abundant active sites and delivers rapid ion diffusion kinetics and high reaction reversibility. Consequently, a high reversible capacity of 422 mAh g-1 at 30 mA g-1 along with an exceptional rate capability (318.6 mAh g-1 at 6 A g-1) are achieved, outperforming almost all previous reported hard carbons. The new concept of cell-shearing chemistry for closed-pore regeneration significantly advances the applications of biomass materials for energy storage.

Poly(3, 4-Ethylenedioxythiophene) as Promising Energy Storage Materials in Zinc-Ion Batteries.

Benefiting from the advantages of high conductivity and good electrochemical stability, the conjugated conducting polymer poly (3, 4-ethylenedioxythiophene) is a promising energy storage material in zinc-ion batteries. Zinc-ion batteries have the advantages of high safety, environmental friendliness, and low cost, but suffer from unstable cathode material structure, poor electrical conductivity, and uncontrollable dendritic growth of zinc anodes. PEDOT, with its fast electrochemical response and wide potential window, is expected to make up for the shortcomings and enhance capacity and cycle life of zinc-ion batteries. Herein, in this review different polymerization methods of poly (3, 4-ethylenedioxythiophene) as well as their structure and properties are summarized; the progress in doping strategies related to the increasing conductivity and dispersivity of poly (3, 4-ethylenedioxythiophene) materials is discussed; specific applications of poly (3, 4-ethylenedioxythiophene)-based materials in anode, cathode, electrolyte, and binder of zinc-ion batteries are explored; and the representative advancements for improving the electrochemical performance of poly (3, 4-ethylenedioxythiophene) in zinc-ion batteries are emphasized. Finally, the current challenges of poly (3, 4-ethylenedioxythiophene) as promising materials in zinc-ion batteries and an insight into their future research directions are pointed out.

Innovative Multielement Modification of Pitch-Derived Two-Dimensional Carbon Nanosheets as Anodes for Superior Performance Sodium-Ion Batteries.

The development of advanced anode materials for sodium-ion batteries (SIBs) using pitch-based carbon materials has the advantages of low cost, high electrical conductivity and easy structural modification. In this research, various well-established modification techniques for petroleum pitch are integrated, including the use of recrystallized NaCl as molten salt template, pretreatment and high-temperature carbonization under a pure oxygen atmosphere, and the introduction of heteroatoms (N and S) by hydrothermal methods. The resulting two-dimensional carbon nanosheets with multielement modification exhibit enhanced Na+ storage properties, thereby bringing higher cycling stability and superior rate performance. Due to its specific structure and chemical composition, NS-P-OPDC exhibited a high reversible capacity of 406.77 mAh g-1 at a current density of 100 mA g-1 and a superior rate performance of 193.20 mAh g-1 at a current density of 3 A g-1 after being applied to the anode of SIB half-cell. Especially, a capacity retention of 97.7% was still achieved after 4000 cycles. Meanwhile, the full-cell assembled by Na3V2(PO4)3 (NVP) cathode and NS-P-OPDC anode could provide a reversible capacity of 235.30 mAh g-1 at a current density of 300 mA g-1. This application proves to advance petroleum pitch-based high-performance electrodes toward greater efficiency in electrochemical energy storage.

Unveiling BaTiO3-SrTiO3 as Anodes for Highly Efficient and Stable Lithium-Ion Batteries.

Amidst the swift expansion of the electric vehicle industry, the imperative for alternative battery technologies that balance economic feasibility with sustainability has reached unprecedented importance. Herein, we utilized Perovskite-based oxide compounds barium titanate (BaTiO3) and strontium titanate (SrTiO3) nanoparticles as anode materials for lithium-ion batteries from straightforward and standard carbonate-based electrolyte with 10% fluoroethylene carbonate (FEC) additive [1M LiPF6 (1:1 EC: DEC) + 10% FEC]. SrTiO3 and BaTiO3 electrodes can deliver a high specific capacity of 80 mA h g-1 at a safe and low average working potential of ≈0.6 V vs. Li/Li+ with excellent high-rate performance with specific capacity of ~90 mA h g-1 at low current density of 20 mA g-1 and specific capacity of ~80 mA h g-1 for over 500 cycles at high current density of 100 mA g-1. Our findings pave the way for the direct utilization of perovskite-type materials as anode materials in Li-ion batteries due to their promising potential for Li+ ion storage. This investigation addresses the escalating market demands in a sustainable manner and opens avenues for the investigation of diverse perovskite oxides as advanced anodes for next-generation metal-ion batteries.

Machine learning descriptors for crystal materials: applications in Ni-rich layered cathode and lithium anode materials for high-energy-density lithium batteries

Lithium batteries have revolutionized energy storage with their high energy density and long lifespan, but challenges such as energy density limitations, safety, and cost still need to be addressed. Crystalline materials, including Ni-rich cathodes and lithium anodes, play pivotal roles in the performance of high-energy-density lithium batteries. Understanding the micro-scale behavior and degradation mechanisms of these materials is crucial for improving macro-scale battery performance. Simulation methods, particularly machine learning (ML) techniques, have become indispensable tools in elucidating these intricate processes because of great efficiency and acceptable accuracy. ML methods depend on descriptors, which bridge the gap between crystal structures and input matrices of models. These descriptors encode essential atomic-level details in crystal structures, enabling predictions of material properties and behaviors relevant to lithium batteries. This paper reviews and discusses the diverse array of descriptors employed in the simulation of crystalline materials for lithium batteries with high energy density. Case studies highlight the effectiveness of different descriptors in simulating cathode behaviors such as Li/Ni disordering, screening of stable LiNi0.8Co0.1Mn0.1O2 (NMC811) configurations, and lithium deposition behaviors at the anode interface. The discussed descriptors can also be applied to other crystalline cathode, anode, and electrolyte materials in lithium batteries and advance the development of lithium batteries with superior energy density.

Rational Synthesis of Spongy Fe3N@N-Doped Carbon Nanorods with Controlled Topography and Porosity for Enhanced Energy Storage Anodes in Lithium-Ion Batteries.

Iron nitrides with the merits of high theoretical capacities, cost-effectiveness, and good electronic/ionic conductivity have been recognized as attractive anode candidates for lithium-ion batteries (LIBs). Carbon compositing, pore engineering, and nanostructure construction have proved to be effective strategies to prepare high-performance metal nitride anodes for LIBs. Herein, we synthesized a series of Fe3N-embedded and N-doped carbon nanorods (Fe3N@NCNR) with a hierarchical porous system and controllable topography by metal-catalyzed graphitization-nitridization of the Fe(III)-triazole framework (Fe-MOF) and thermal evaporation of the triblock copolymer F127 template assembled in Fe-MOF via hydrogen bonding interaction, followed by the air oxidation and urea-assisted ammonolysis processes. The Fe3N@NCNR as anodes for LIBs display extraordinary lithium storage capabilities with a high reversible capacity of 830 mA h g-1 at 0.1 C, a good rate performance of 576 mAh g-1 at 5 C, and a long-term cycling stability of 742 mA h g-1 over 600 cycles at 1 C. Such outstanding performance benefits from the spongy carbon nanorods with rich macropores for rapid electronic/ionic transport and effective accommodation of electrode volume expansion, abundant N-doped meso-/microporous carbon for the additional storage of Li+ via capacitive effect, and the efficient utilization of Fe3N nanoparticles uniformly distributed through carbon nanorods. Importantly, this work introduces an effective strategy to construct superior performance nitride anodes from MOF surfactants based on hydrogen bonding-driven interface self-assembly and provides insight into the preparation of highly efficient nanoarchitectures for Li+ storage.

First-principles study on the lithiation process of amorphous SiO anode for Li-ion batteries with Bayesian optimization.

Amorphous silicon monoxide (a-SiO), which contains Si atoms with various valence states, has attracted much attention as a high-performance anode material for lithium (Li) ion batteries (LIBs). Although current experiments have provided some information during charge/discharge cycles, further investigation of structural changes at the atomic scale is needed. To investigate the lithiation process of a-SiO using first-principles simulations and machine learning techniques, we developed a computational code employing Bayesian optimization to efficiently identify stable sites for Li insertion in the large search-space of amorphous models to reproduce the actual lithiation process and compared this approach to the conventional random scheme by applying it to an a-SiO model previously generated with neural network potentials. The lithiation process based on Bayesian optimization resulted in lower formation energies compared to the conventional random scheme, indicating a more stable structure. During lithiation, Li atoms tended to enter the silicon (Si) phase after the SiO2 phase, in agreement with experimental results. We analyzed the structural changes and observed significant differences in the structural evolution between the conventional and new schemes. Our study highlights the significant influence of the lithiation process on the structural transformation of a-SiO materials, which in turn affects the reversible capacity of the material. These findings will provide a framework for improving the performance and lifetime of a-SiO materials.

First‐Principles Calculation of SnSe2 Material as Anode Material of Zinc Ion Battery

ABSTRACTThe development of high‐performance ion battery anode materials is conducive to the rapid development of urban rail transit. Based on first‐principles calculations, this paper studies the potential performance of the recently discovered two‐dimensional material SnSe2 as a negative electrode for zinc ion batteries. By calculating the adsorption energy, the most stable adsorption configuration of Zn was determined. The band gap of intrinsic SnSe2 decreases after strain, which promotes the transition of carriers. The band gap opens after the strain occurs in the Zn adsorbed SnSe2 system (Zn‐SnSe2), which confirms the regulation of strain on the band gap. The lowest diffusion barrier of Zn is 0.083 eV. The theoretical zinc storage capacity is calculated to be 387.550 mAh/g. The calculation results provide theoretical parameters for the application of SnSe2 in ion batteries.

A flexible porous polyimide/copper composite film toward high-mass-loading anodes in lithium-ion batteries

Conventional metal foil current collectors are essential for electronic conduction in lithium-ion batteries, but the planar structure limits the fast transporting of electron and the power density. Herein, a light, conductive, self-extinguishing, and flexible porous polyimide/copper composite film (PIF/Cu) derived from a polyimide foam was fabricated via hot pressing and electroless plating methods. The honeycomb structure was illustrated in PIF/Cu under a 3D X-ray tomography microscope, revealing the successful construction of a 3D conductive network. PIF/Cu-30 possessed an electronic conductivity of as high as 3.6 × 105 S m−1 at a bulk density of 0.26 g cm−3 and exhibited exceptional structural stability even after successive and harsh mechanical loads. Graphite with a mass load of 12 mg cm−2 was loaded into the PIF/Cu-30 to prepare the anode for cell assembly. The cells using PIF/Cu-30 achieved a better performance in capacity retention (98.2 %@60 cycles) than those using traditional Cu foils (55.1 %@60 cycles), which resulted from the fast transport of electrons and Li-ion through the 3D conductive networks in the porous PIF/Cu-30.

Transition Metal (Co, Ni, Fe) Selenides by Selenization of Gallic Acid based MOFs used as Na‐Ion Battery Anodes

AbstractSodium‐ion batteries (NIBs) are gaining momentum, thanks to the increasing demand for energy storage devices and the abundant reserves and low sodium cost. Transition metals are well‐established materials due to their high conductivity and electrochemical activity. In this work, metal selenides (MSex) (M: Ni, Co, Fe) are obtained by facile selenization in a single step of transition gallic acid based metal organic frameworks (MOFs) under Ar flow at 600 °C. As the powders undergo selenization, the resulting MSex particles are encapsulated within the amorphous carbon network formed by the decomposition of the gallate ligand. The microstructures are examined by HR‐TEM analyses and the characteristic interplanar spacing of each transition metal selenide is measured and found to coincide with the XRD pattern. Meanwhile, the specific surface areas were measured as 121, 152, and 155 m2/g for CoSe2, NiSe and FeSe, respectively. The resulting NiSe/C, CoSe2/C and FeSe/C nanomaterials are tested as NIB negative electrodes and are shown to have a capacity of 315, 312, and 363 mAh/g, respectively, after 100 cycles at a current density of 100 mA/g while Na‐ion diffusion coefficients (DNa+) are calculated in the range of 10−10–10−7 cm2/s by galvanostatic intermittent titration (GITT) technique.

Photodiode-based focus monitoring in ultrashort-pulsed laser structuring of graphite anodes for lithium-ion batteries

In recent years, there has been an increased demand for elaborate monitoring techniques in laser material processing. This has been driven by the need for fast and cost-efficient quality assurance processes. At the same time, ultrashort-pulsed (USP) laser radiation has emerged as a promising technology for creating intricate microstructures in lithium-ion battery graphite anodes due to its high precision and negligible thermal impact. However, the integration of process monitoring in USP laser applications for graphite anode structuring is still unexplored. There is a lack of clarity on suitable sensors, observable parameters, and extractable process-relevant insights. The presented study addressed this gap by demonstrating the capability of state-of-the-art photodiode-based monitoring systems in collecting process-relevant data and deriving valuable insights. A sensor equipped with three photodiodes was employed to address these challenges. Exploratory data analysis and machine learning methodologies were leveraged to develop a data pipeline for processing the acquired information. The data were used to train convolutional neural networks that could accurately predict the focal position. At the same time, the limitations of traditional regression approaches could be shown. The findings advanced the understanding of the possibilities of process monitoring in USP laser applications and emphasized the significance of data-driven approaches in optimizing manufacturing processes.

Molecular Engineering Chemical Pre-lithiation Reagent with Low Redox Potential for Graphite Anode Enables High Coulombic Efficiency.

Graphite (Gr) is a low-cost and high-stability anode for lithium-ion batteries (LIBs). However, Gr anode exhibits an obstinate drawback of low initial Coulombic efficiency (ICE), owing to the active lithium loss for the solid electrolyte interphase (SEI) layer. Herein, a straightforward and effective chemical pre-lithiation strategy is proposed to compensate for the lithium loss. A molecular engineering phenanthrene-based lithium-arene complex (Ph-based LAC) reagent is designed by density functional theory (DFT) calculations. The engineering Ph-based reagent enhances the stability of the π-electron system and the electron-donating capacity, resulting in a reduced redox potential to facilitate lithium transfer. The electrochemical distinct of the Ph-based reagent is illustrated, the prelithiation process in a low Li-insertion platform, and the lithiation degree is controllable with the dipping time (ICE = 102%, 3min). Notably, a denser and homogeneous SEI layer has pre-formed to enhance the Li+ transport and interface stability. Moreover, the lithium-ion full batteries assemble with LiFePO4 and NCM811 cathode, which exhibits high ICE (96.5% and 90.3%) and energy density (310 and 333Whkg-1). These findings present a facile and controllable pre-lithiation strategy to compensate for the lithium of LIBs, providing new valuable insights into the design and optimization of battery manufacture.

Comparative Analysis of Graphitization Characteristics in Bamboo and Oak Charcoals for Secondary Battery Anodes

When compared to natural graphite, artificial graphite has advantages such a longer cycle life, faster charging rates, and better performance. However, the process of producing it, which frequently uses coal, raises questions about the impact on the environment and the depletion of resources. Eco-friendly, wood-based graphite must be developed in order to solve these problems. This study assessed and investigated the characteristics of charcoals derived from bamboo and oak which were utilized to produce graphite. After heating to 1500 °C at 10 K/min, 86.87 wt% of oak charcoal and 88.33 wt% of bamboo charcoal remained, indicating a yield of more than 85% when charcoal was graphitized. Depending on the species of wood, different-sized pores showed different shapes as the graphitization process advanced, as revealed by SEM surface analyses. The carbon atoms seen in the XRD crystal development changed into graphite crystals when heated to 2400 °C, and the isotropic peaks vanished. Bamboo charcoal has a higher degree of crystallinity than other wood-based charcoals, such as oak charcoal, which is made up of turbostratic graphite, according to Raman spectroscopic research. Lithium-ion batteries employ bamboo charcoal as their anode material. At this point, the values for soft carbon were determined to be 196 mAh/g and for hard carbon to be 168 mAh/g at a current density of 0.02 A/g.

Preparation of interconnected tin oxide nanoparticles on multi-layered MXene for lithium storage anodes

MXenes, a novel class of two-dimensional (2D) materials known for their excellent electronic conductivity and hydrophilicity, have emerged as promising candidates for lithium-ion battery anodes. This study presents a simple wet-chemical method for depositing interconnected SnO2 nanoparticles (NPs) onto MXene sheets. The SnO2 NPs act as both a high-capacity energy source and a spacer to prevent MXene sheets from restacking. The highly conductive MXene facilitates rapid electron and lithium-ion transport and mitigates the volume changes of SnO₂ during the lithiation/delithiation process by confining the SnO₂ NPs between the MXene layers. This composite anode, SnO2@MXene, leverages the high capacity of SnO2 and the structural and mechanical stability MXene provides. The SnO2@MXene anode exhibits superior electrochemical performance, with a high specific capacity of 678 mAh g− 1 at a current rate of 2.0 A g− 1 over 500 cycles, outperforming pristine MXenes and SnO2 nanoparticles.

Covalent Carbide Interconnects Enable Robust Interfaces and Thin SEI for Graphite Anode Stability under Extreme Fast Charging.

Carbonaceous and carbon-coated electrodes are ubiquitous in electrochemical energy storage and conversion technologies due to their electrochemical stability, lightweight nature, and relatively low cost. However, traditional reliance on conductive additives and binders leads to impermanent electrical pathways. Here, a general approach is presented to fabricate robust electrodes with a progressive failure mechanism by introducing carbide-based interconnects grown via carbothermal conversion of (5 wt%) titanium hydride nanoparticles. This method concurrently enhances both electrical and mechanical properties within the electrode architecture. The resulting chemical bonding between active materials establishes a novel mechanism to maintain stable electrical pathways during cycling. Employed as Li-ion battery anodes, these electrodes exhibit improved cyclability, achieving 80% capacity retention after 800 fast-charge cycles at moderate loading (1 mAh cm- 2). High loading cells with areal capacity of 3 mAh cm-2 show significantly improved cycle lifeover the same number of cycles. This performance improvement is attributed to the absence of significant impedance growth and a thinner solid electrolyte interphase (SEI) layer formed at high current densities (4C) as demonstrated by X-ray photoelectron spectroscopy and transmission electron microscopy studies. The enhanced conductivity facilitates SEI formation, lowering ionic impedance and mitigating lithium plating, ultimately leading to the reported extended cycle life.

Oxygen-containing groups assist in enhancing Li+/K+ storage: Balancing adsorption and intercalation mechanisms

Porous carbon nanosheets were prepared using a high-temperature solid-phase method and subsequently modified through oxidative acid treatment to introduce oxygen-containing groups. The application and performance of these nanosheets as anodes in lithium-ion and potassium-ion batteries were investigated. The results indicated that the oxidative acid treatment successfully enhanced the porous carbon nanosheets' capacity for storing Li+/K+. Electrochemical analysis revealed that the oxygen-containing groups balanced intercalation and surface storage behaviors, optimizing the nanosheets' storage performance. These modified porous carbon nanosheets (termed SN@PCNs) demonstrated significantly boosted reversible Li+ and K+ storage capacities, achieving 1038.1 mAh⋅g−1 and 371.7 mAh⋅g−1 at 0.1 A g−1, respectively, while maintaining capacities of 443.3 mAh⋅g−1 for Li+ and 153.9 mAh⋅g−1 for K+ at 5.0 A g−1. Furthermore, the study emphasized the significance of a balanced surface capacitance and solid-phase diffusion storage mechanism in attaining high storage capacity and cycle stability. Moderate oxidation and the introduction of oxygen-containing groups were identified as crucial factors in optimizing performance. Additionally, potassium adsorption storage exhibited an advantage over lithium adsorption storage, and the impact of oxygen-containing groups on potassium storage performance was even more pronounced.

Weakly solvated electrolyte enables the robust solid electrolyte interface on SiOx anodes for lithium-ion battery

Silicon oxide (SiOx) anodes are considered to be the promising alternative to graphite anodes for lithium-ion batteries. However, the traditional carbonate electrolyte fails to generate the effective solid electrolyte interface (SEI) on SiOx anodes to well adapt the large volume expansion of SiOx particles. Herein, a weakly solvated perfluorinated electrolyte with dual lithium salts was designed to match SiOx anodes. The perfluorinated solvent with weakened solvation ability and the strong coordination of Li+-DFOB− and Li+-TFSI− lead to an anion-dominated solvated shell, which induces the formation of inorganics-rich SEI. The high-strength bonds (Li-F, B-F, B-O, B-N et al.) enable high mechanical strength and rapid ion migration of the SEI film, thereby effectively accommodating the volume expansion of SiOx and avoiding continuous decomposition of the electrolyte. Furthermore, as designed electrolyte also shows excellent flame retardancy and high voltage stability. Consequently, the SiOx anode exhibits remarkably improved cycling performance in contrast to that in traditional carbonate electrolyte, maintaining 1073.7 mAh/g after 300 cycles at 1.0 A/g when paired with metal Li, and presents excellent compatibility with commercial cathodes including LiFePO4 and LiNi0.8Co0.1Mn0.1O2. This work provides a new inspiration and path for the design of electrolyte highly matched with silicon oxide anodes.

Improved electrochemical properties of lithium-ion batteries prepared using oxygen plasma-treated needle coke-based anode materials

High-rate capacities and specific capacities are important indicators for evaluating lithium-ion battery (LIB) anodes. To improve the electrochemical properties of needle coke-based anode materials, oxygen plasma treatment was used. Various analyses were performed to assess the impact of the oxygen plasma treatments on the chemical, structural, and morphological properties of the needle coke samples. The oxygen plasma treatment effectively introduced oxygen functional groups (hydroxyl, ether, carbonyl, and carboxyl groups) without significant structural changes to the needle coke samples, and the O/C ratio increased to 0.23 after the plasma treatment. The synergistic effect of the increased oxygen content and the defects formed on the surface by plasma treatment improved the electrochemical properties of the needle coke-based anodes. The discharge capacity of the oxygen plasma-treated needle coke-based LIBs increased to a maximum of 20.48 %, and the retention rate was 74.51 % at 5 C with respect to 0.1 C. The oxygen plasma-treated needle coke material prepared via a simple method could have an important role in improving the rate capacities and specific capacities of LIBs.

Effect of Various Carbon Coating Techniques on the Electrochemical Performance of Li4Ti5O12 Synthesized by Sol-Gel Method

This study aimed to prepare spinel carbon-coated Li4Ti5O12 (LTO/C) via sol-gel reaction and applied as a high-performance lithium-ion battery anode. The LTO powder was coated using various carbon sources, super P (SP), sugar and PVDF-assisted SP. The crystal structure, morphology, conductivity and electrochemical performance of the samples were examined using X-ray diffraction (XRD), Field Emission scanning electron microscopy (FESEM), Fourier Transform Infrared (FTIR) spectroscopy, Electrochemical Impedance Spectroscopy (EIS) and Cyclic Voltammetry/Charge-discharge (CV/CD), respectively. The XRD analysis results showed that the samples contain highly crystalline spinel LTO as the main phase and rutile as impurity. The FESEM image showed that SP covers the entire LTO surface more homogenous than sugar. However, sugar carbon makes roughness on the LTO surface. FTIR spectra showed that the coating using sugar and PVDF still contain hydrocarbon element. Electrochemical performance evaluations showed that SP carbon-coated-LTO possesses higher lithium diffusion and specific capacity than pure LTO, while sugar-coated-LTO shows the lowest specific capacity. Moreover, the SP carbon-coated-LTO sample high-rate capability has improved during full cell evaluation, delivering a discharge capacity of 249, 231, 211, 194, 58, and 23 mAhg-1 at the charge or discharge current density of 0.05, 0.1, 0.5, 1, 5, and 10 C, respectively.