Anatomical Properties Research Articles

Review of individualized current flow modeling studies for transcranial electrical stimulation.

There is substantial intersubject variability of behavioral and neurophysiological responses to transcranial electrical stimulation (tES), which represents one of the most important limitations of tES. Many tES protocols utilize a fixed experimental parameter set disregarding individual anatomical and physiological properties. This one-size-fits-all approach might be one reason for the observed interindividual response variability. Simulation of current flow applying head models based on available anatomical data can help to individualize stimulation parameters and contribute to the understanding of the causes of this response variability. Current flow modeling can be used to retrospectively investigate the characteristics of tES effectivity. Previous studies examined, for example, the impact of skull defects and lesions on the modulation of current flow and demonstrated effective stimulation intensities in different age groups. Furthermore, uncertainty analysis of electrical conductivities in current flow modeling indicated the most influential tissue compartments. Current flow modeling, when used in prospective study planning, can potentially guide stimulation configurations resulting in individually effective tES. Specifically, current flow modeling using individual or matched head models can be employed by clinicians and scientists to, for example, plan dosage in tES protocols for individuals or groups of participants. We review studies that show a relationship between the presence of behavioral/neurophysiological responses and features derived from individualized current flow models. We highlight the potential benefits of individualized current flow modeling.

Wood structure explained by complex spatial source-sink interactions

Wood is a remarkable material with great cultural, economic, and biogeochemical importance. However, our understanding of its formation is poor. Key properties that have not been explained include the anatomy of growth rings (with consistent transitions from low-density earlywood to high density latewood), strong temperature-dependence of latewood density (used for historical temperature reconstructions), the regulation of cell size, and overall growth-temperature relationships in conifer and ring-porous tree species. We have developed a theoretical framework based on observations on Pinus sylvestris L. in northern Sweden. The observed anatomical properties emerge from our framework as a consequence of interactions in time and space between the production of new cells, the dynamics of developmental zone widths, and the distribution of carbohydrates across the developing wood. Here we find that the diffusion of carbohydrates is critical to determining final ring anatomy, potentially overturning current understanding of how wood formation responds to environmental variability and transforming our interpretation of tree rings as proxies of past climates.

Physical and Mechanical Properties of Oriented Flattened Bamboo Boards from Ater (Gigantochloa atter) and Betung (Dendrocalamus asper) Bamboos

Bamboo-based composite has been used widely for building components and furniture. Oriented flattened bamboo board (OFBB) is a composite board consisting of oriented structure sheets of flattening bamboo. This study aimed to analyze the physical and mechanical properties of the OFBB from ater (Gigantochloa atter) and betung (Dendrocalamus asper) bamboo. A three-layer flattened bamboo board using the isocyanate resin with a density target of 0.6 g/cm3 was applied. The characteristics of raw bamboo, the contact angle of OFBB, and board properties of density, moisture content, thickness swelling, and water absorption, as well as bending, internal bonding (IB), and compressive strength properties were determined to evaluate the quality of the OFBB. Based on the findings, the thin wall thickness of ater bamboo enhanced the physical and mechanical properties of the OFBB compared to the higher wall thickness of betung bamboo. Therefore, further development in bamboo composite products with those anatomical properties seems promising. The dimensional stability and bending properties of OFBB from ater bamboo met the quality of first grade of the Canadian Standard for OSB and waferboard, except for the IB strength. Keywords: Bamboo wall thickness, contact angle, Dendrocalamus asper, Gigantochloa atter, oriented flattened bamboo board

Impact of pelvicalyceal anatomical variation on surgical outcomes of endoscopic combined intrarenal surgery.

The objective of this work is to investigate the impact of the pelvicalyceal anatomical system (PCS) on calyceal stone formation and surgical outcomes of endoscopic combined intrarenal surgery (ECIRS) for renal and/or proximal ureteral stones with a diameter >15 mm. PCS was classified as Type I (single pelvis) or Type II (divided pelvis) according to the simple anatomical Takazawa classification. Using prospectively collected data from January 2016 to April 2020, 219 patients were retrospectively reviewed. After excluding patients who underwent a staged procedure, had hydronephrosis greater than grade 2, prior nephrostomy tubes, and failed to access the renal collecting system, 115 patients (Type I: 81, Type II: 34) were included, and the distribution of calyceal stones and surgical outcomes in ECIRS were compared between Types I and II PCS. The median number of renal stone calyces in the Type II group was significantly more than that in the Type I group (p= 0.016). In particular, the Type II group possessed more upper stone calyces. Multivariate logistic regression analysis revealed that Type II PCS was associated with an increased odds ratio (OR) for the presence of upper stone calyces (OR: 2.93, p= 0.018). The stone-free (SF) status at 1month after surgery, confirmed by abdominal plain radiography, was significantly higher in the Type I group compared with that in Type II (67.9% vs. 39.4%, respectively; p= 0.006). The requirement for additional surgical interventions was significantly higher in the Type II group compared with that in Type I (35.4% vs. 7.4%, respectively; p< 0.001). Multivariate analysis revealed that the number of stone calyces (OR: 4.26; p= 0.001) and Type II PCS (OR: 3.43; p= 0.009) were independent predictors of residual stones after ECIRS. We first revealed that the anatomic properties of PCS play a role in both upper calyceal stone formation and in the success of the ECIRS procedure. Because the SF rate in Type II PCS was significantly lower than that in Type I PCS, additional percutaneous nephrolithotomy tracts might be required, even for ECIRS.

Clinical realization of anatomical and physiological properties of the sinoatrial node

Diseases of the sinoatrial node (SАN) are characterized by its inability to perform the function of the dominant pacemaker. This review presents data from recent studies of the anatomy and physiology of the SАN, which demonstrate the presence of structural and functional heterogeneity of the SAN and its components, describes the structure and function of the conducting intra-nodal pathways, the “novel paranodal area”, and also discusses the phenomenon of a shift in the site of excitation generation and the presence of a “non-firing mode” of cardiomyocytes. The authors critically discussed the genetic mechanisms of the development of sick sinus node syndrome (SSS), justified a multidisciplinary approach and further anatomical, morphological and physiological studies that play a fundamental role in the development of therapy and diagnosis of related diseases.

Complex host/symbiont integration of a multi-partner symbiotic system in the eusocial aphid Ceratovacuna japonica.

Some hemipteran insects rely on multiple endosymbionts for essential nutrients. However, the evolution of multi-partner symbiotic systems is not well-established. Here, we report a co-obligate symbiosis in the eusocial aphid, Ceratovacuna japonica. 16S rRNA amplicon sequencing unveiled co-infection with a novel Arsenophonus sp. symbiont and Buchnera aphidicola, a common obligate endosymbiont in aphids. Both symbionts were housed within distinct bacteriocytes and were maternally transmitted. The Buchnera and Arsenophonus symbionts had streamlined genomes of 432,286bp and 853,149bp, respectively, and exhibited metabolic complementarity in riboflavin and peptidoglycan synthesis pathways. These anatomical and genomic properties were similar to those of independently evolved multi-partner symbiotic systems, such as Buchnera-Serratia in Lachninae and Periphyllus aphids, representing remarkable parallelism. Furthermore, symbiont populations and bacteriome morphology differed between reproductive and soldier castes. Our study provides the first example of co-obligate symbiosis in Hormaphidinae and gives insight into the evolutionary genetics of this complex system.

A tripartite view of the posterior cingulate cortex.

The posterior cingulate cortex (PCC) is one of the least understood regions of the cerebral cortex. By contrast, the anterior cingulate cortex has been the subject of intensive investigation in humans and model animal systems, leading to detailed behavioural and computational theoretical accounts of its function. The time is right for similar progress to be made in the PCC given its unique anatomical and physiological properties and demonstrably important contributions to higher cognitive functions and brain diseases. Here, we describe recent progress in understanding the PCC, with a focus on convergent findings across species and techniques that lay a foundation for establishing a formal theoretical account of its functions. Based on this converging evidence, we propose that the broader PCC region contains three major subregions - the dorsal PCC, ventral PCC and retrosplenial cortex - that respectively support the integration of executive, mnemonic and spatial processing systems. This tripartite subregional view reconciles inconsistencies in prior unitary theories of PCC function and offers promising new avenues for progress.

Anatomical properties of branches and twigs mangrove woods

In order to optimize the utilization of mangrove woods, particularly branches and twigs parts, this research was conducted to investigate anatomical properties of three species of mangrove woods, namely api-api (Avicennia marina), bakau minyak (Rhizopora apiculata), and berembang (Sonneratia caseolaris). The properties were comprised of both microtome sections and macerations dimensions. Procedure for microtome followed Sass method, resulted in three sections for each part, namely cross-section (L/longitudinal), radial/R section, and tangential/T section. Technical procedure for maceration based on Forest Product Laboratory (FPL) method, resulted in measurement of fiber dimension and derivative of fiber dimension. In term of microtome, the anatomical features between branches and twigs for each species in L, R, T sections are similar, but their quantitative anatomical observations between twigs and branches have differences in the vessel, rays and fiber parameters statistically. In term of fiber dimension and its derivatives (Runkel Ratio, Felting Power, Mulhstep Ratio, Coefficient Rigidity, Flexibility Ratio) both branches and twigs showed same quality class, namely 3rd class with scored 150-175 points.

Chemosensory Coding in Drosophila Single Sensilla.

The chemical senses-smell and taste-detect and discriminate an enormous diversity of environmental stimuli and provide fascinating but challenging models to investigate how sensory cues are represented in the brain. Important stimulus-coding events occur in peripheral sensory neurons, which express specific combinations of chemosensory receptors with defined ligand-response profiles. These receptors convert ligand recognition into spatial and temporal patterns of neural activity that are transmitted to, and interpreted in, central brain regions. Drosophila melanogaster provides an attractive model to study chemosensory coding because it possesses relatively simple peripheral olfactory and gustatory systems that display many organizational parallels to those of vertebrates. Moreover, nearly all peripheral chemosensory neurons have been molecularly characterized and are accessible for physiological analysis, as they are exposed on the surface of sensory organs housed in specialized hairs called sensilla. Here, we briefly review anatomical, molecular, and physiological properties of adult Drosophila olfactory and gustatory systems and provide background to methods for electrophysiological recordings of ligand-evoked activity from different types of chemosensory sensilla.

Longitudinal interrogation of sympathetic neural circuits and hemodynamics in preclinical models.

Neurological disorders, including spinal cord injury, result in hemodynamic instability due to the disruption of supraspinal projections to the sympathetic circuits located in the spinal cord. We recently developed a preclinical model that allows the identification of the topology and dynamics through which sympathetic circuits modulate hemodynamics, supporting the development of a neuroprosthetic baroreflex that precisely controls blood pressure in rats, monkeys and humans with spinal cord injuries. Here, we describe the continuous monitoring of arterial blood pressure and sympathetic nerve activity over several months in preclinical models of chronic neurological disorders using commercially available telemetry technologies, as well as optogenetic and neuronal tract-tracing procedures specifically adapted to the sympathetic circuitry. Using a blueprint to construct a negative-pressure chamber, the approach enables the reproduction, in rats, of well-controlled and reproducible episodes of hypotension-mimicking orthostatic challenges already used in humans. Blood pressure variations can thus be directly induced and linked to the molecular, functional and anatomical properties of specific neurons in the brainstem, spinal cord and ganglia. Each procedure can be completed in under 2 h, while the construction of the negative-pressure chamber requires up to 1 week. With training, individuals with a basic understanding of cardiovascular physiology, engineering or neuroscience can collect longitudinal recordings of hemodynamics and sympathetic nerve activity over several months.

Use of near-infrared spectroscopy to estimate physical, anatomical and hydraulic properties of Eucalyptus wood.

Tree breeding programs and wood industries require simple, time- and cost-effective techniques to process large volumes of samples. In recent decades, near-infrared spectroscopy (NIRS) has been acknowledged as one of the most powerful techniques for wood analysis, making it the most used tool for high-throughput phenotyping. Previous studies have shown that a significant number of anatomical, physical, chemical and mechanical wood properties can be estimated through NIRS, both for angiosperm and gymnosperm species. However, the ability of this technique to predict functional traits related to drought resistance has been poorly explored, especially in angiosperm species. This is particularly relevant since determining xylem hydraulic properties by conventional techniques is complex and time-consuming, clearly limiting its use in studies and applications that demand large amounts of samples. In this study, we measured several wood anatomical and hydraulic traits and collected NIR spectra in branches of two Eucalyptus L'Hér species. We developed NIRS calibration models and discussed their ability to accurately predict the studied traits. The models generated allowed us to adequately calibrate the reference traits, with high R2 (≥0.75) for traits such as P12, P88, the slope of the vulnerability curves to xylem embolism or the fiber wall fraction, and with lower R2 (0.39-0.52) for P50, maximum hydraulic conductivity or frequency of ray parenchyma. We found that certain wavenumbers improve models' calibration, with those in the range of 4000-5500cm-1 predicting the highest number of both anatomical and functional traits. We concluded that the use of NIRS allows calibrating models with potential predictive value not only for wood structural and chemical variables but also for anatomical and functional traits related to drought resistance in wood types with complex structure as eucalypts. These results are promising in light of the required knowledge about species and genotypes adaptability to global climatic change.

Intra-annual fluctuation in morphology and microfibril angle of tracheids revealed by novel microscopy-based imaging.

Woody cells, such as tracheids, fibers, vessels, rays etc., have unique structural characteristics such as nano-scale ultrastructure represented by multilayers, microfibril angle (MFA), micro-scale anatomical properties and spatial arrangement. Simultaneous evaluation of the above indices is very important for their adequate quantification and extracting the effects of external stimuli from them. However, it is difficult in general to achieve the above only by traditional methodologies. To overcome the above point, a new methodological framework combining polarization optical microscopy, fluorescence microscopy, and image segmentation is proposed. The framework was tested to a model softwood species, Chamaecyparis obtusa for characterizing intra-annual transition of MFA and tracheid morphology in a radial file unit. According our result, this framework successfully traced the both characteristics tracheid by tracheid and revealed the high correlation (|r| > 0.5) between S2 microfibril angles and tracheidal morphology (lumen radial diameter, tangential wall thickness and cell wall occupancy). In addition, radial file based evaluation firstly revealed their complex transitional behavior in transition and latewood. The proposed framework has great potential as one of the unique tools to provide detailed insights into heterogeneity of intra and inter-cells in the wide field of view through the simultaneous evaluation of cells' ultrastructure and morphological properties.

Morpho-anatomical and palynological properties of endemic Astragalus tmoleus var. bounacanthus (Fabaceae)

Astragalus tmoleus Boiss. var. bounacanthus (Boiss.) Chamberlain is a member of the Pterophorus Bunge section of the Fabaceae family and consists of the spiny cushion-forming shrub. In this study, morphological, anatomical and pollen properties of the plant, an endemic species for Turkey, have been investigated in detail. Morphological characters such as the shape of paripinnate leaves, stipules and bracts, the flower number in the inflorescence, the stenonychioid type of standard and the reniform type of seed can be helpful to distinguish A. tmoleus var. bounacanthus. The stem, leaf and rachis characteristics of the plant were examined in anatomical studies. There is a secondary growth in stem anatomy. The number of vascular bundles is 15-18 in a circle. The shape of the transversal section of the rachis is polygonal or almost orbicular. The sclerenchyma tissue is located on the vascular bundles in the rachis. A. tmoleus var. bounacanthus has equifasial leaves. The stomata type is anomocytic and occurs on both leaflet epidermises. The pollen grains of A. tmoleus var. bounacanthus have tricolpate aperture and they are subprolate-shaped. While the pollen exine sculpturing is microreticulate, the seed surface sculpturing is a prominent undulate-ridged pattern formed by irregular cells. Scanning electron microscopy (SEM) is used to determine pollen and seed morphology.

Ependymal cells and neurodegenerative disease: outcomes of compromised ependymal barrier function.

Within the central nervous system, ependymal cells form critical components of the blood-cerebrospinal fluid barrier and the cerebrospinal fluid-brain barrier. These barriers provide biochemical, immunological and physical protection against the entry of molecules and foreign substances into the cerebrospinal fluid while also regulating cerebrospinal fluid dynamics, such as the composition, flow and removal of waste from the cerebrospinal fluid. Previous research has demonstrated that several neurodegenerative diseases, such as Alzheimer's disease and multiple sclerosis, display irregularities in ependymal cell function, morphology, gene expression and metabolism. Despite playing key roles in maintaining overall brain health, ependymal barriers are largely overlooked and understudied in the context of disease, thus limiting the development of novel diagnostic and treatment options. Therefore, this review explores the anatomical properties, functions and structures that define ependymal cells in the healthy brain, as well as the ways in which ependymal cell dysregulation manifests across several neurodegenerative diseases. Specifically, we will address potential mechanisms, causes and consequences of ependymal cell dysfunction and describe how compromising the integrity of ependymal barriers may initiate, contribute to, or drive widespread neurodegeneration in the brain.

Heterogeneity in mechanical properties of cortical bone for the selection and design of anatomic site-specific nanoparticle reinforced bone tissue engineering scaffold

Bone tissue has the potential to self-heal and renew, but large-scale bone abnormalities caused by infection, trauma, or any malignancy shall require intervention from external sources. To mimic the host tissue i.e., bone mechanical properties, the scaffolds for bone tissue engineering are designed. However, the host tissue mechanical properties are anatomic site-specific as per the location where a scaffold has to be implanted to facilitate tissue regeneration. This is because of the heterogeneous and hierarchical structure of bone that consists of mineral nano-particles, water, collagenous protein, etc. which makes bone a more complex material. Fabricating nano-scaffolds becomes a challenging task that can resemble the bone properties in form of biological, chemical, or mechanical. As a result, it is required to examine the change in mechanical properties of a bone throughout the site to build efficient nano-scaffolds for tissue engineering/bone regeneration. The mechanical characteristics of cortical bone were investigated at three diaphysis regions of the femoral cortical bone under tension and compression stress. The obtained mechanical properties have been compared statistically using a t-test at p < 0.05 and found a statistical difference in the mechanical properties for different diaphysis locations. The findings of this research may be helpful for the researchers working on the design of nanoparticle-based composite biomaterials to mimic the anatomic site-specific mechanical properties of bone for tissue engineering applications.

Anatomic and Physiologic Properties and Clinical Manifestations ofVestibulo-Autonomic Reflexes

The vestibular nervous system senses linear and angular acceleration upon the head during postural change and generates vestibular nerve activity changes. The autonomic nervous system regulates involuntary physiologic processes throughout the peripheral and central nervous systems. The vestibular and autonomic systems interplay throughout several brain regions to maintain homeostasis during the postural changes, called vestibulo-autonomic reflex. In this review, we first contemplated the anatomic and physiologic properties of vestibulo-autonomic reflex, focusing on the relationship between vestibular and cardiovascular systems and between the vestibular and respiratory systems and the role of the brainstem and cerebellum on the vestibulo-autonomic reflex. Then, we summarized the autonomic dysfunction reported in patients with various vestibular disorders, such as acute unilateral vestibulopathy, benign paroxysmal positional vertigo, Meniere’s disease, and persistent perceptual postural dizziness. Finally, we described the mechanism of autonomic manifestation in vestibular disorders in detail using the recently proposed mechanism of vestibular syncope integrating the vestibular system, brainstem and cerebellum, and autonomic system functions.

Are The Lateral Wall Reduction And Ideal Tip-Apex Distance Important In Reverse Oblique And Transverse Intertrochanteric Femoral Fractures (31-A3) Treated With Gamma Nail?

Purpose: Reverse oblique and transverse intertrochanteric femoral fractures (31A3 AO/OTA classification) have their own mechanical and anatomical properties. The aim of our study is to verify whether the reduction of the lateral femoral wall and ideal tip-apex distance are important predictive factors in the future of these fractures treated by gamma nails in terms of healing and complication rates. Methods: The radiological and clinical outcomes of 35 fractures of this type treated by short and long gamma nail from June 2014 to April 2021 were retrospectively reviewed. The elements considered were the quality of the lateral femoral wall reduction, the tip-apex distance (TAD), the lag screw position and overall quality reduction using the Baumgaertner criteria. Union, nonunion, cutout, screw sliding, nail or screw breakage were also radiographically evaluated during follow-up. Results: The union rate was 97%. A significant association was not observed between the state of reduction of the lateral wall and the three types of complications considered (cutout: p=0.31; sliding screw: p=1.00; varus displacement: p=0.30), and the linear regression model obtained indicates that in subjects with a non-reduction of the lateral wall, the consolidation time is increased on average by approximately 3 months (β= 2.99; 95%CI: 1.79-4.20, p&lt;0.001). No significant association was found between TAD and complications (cut-out: p=1.00; sliding screw: p=1.00; varus displacement: p=0.13). Conclusion: Anatomic reduction of the lateral wall and an ideal TAD ≤ 25mm might not be as significant for 31A3 fractures treated with gamma nails. Acceptable reduction of the lateral wall and stable internal fixation are sufficient elements to achieve fracture healing and functional recovery.

Neocortical layer 5 subclasses: From cellular properties to roles in behavior.

Layer 5 (L5) serves as the main output layer of cortical structures, where long-range projecting pyramidal neurons broadcast the columnar output to other cortical and extracortical regions of the brain. L5 pyramidal neurons are grouped into two subclasses based on their projection targets; while intratelencephalic (IT) neurons project to cortical areas and the striatum, extratelencephalic (ET) neurons project to subcortical areas such as the thalamus, midbrain, and brainstem. Each L5 subclass possesses distinct morphological and electrophysiological properties and is incorporated into a unique synaptic network. Thanks to recent advances in genetic tools and methodologies, it has now become possible to distinguish between the two subclasses in the living brain. There is increasing evidence indicating that each subclass plays a unique role in sensory processing, decision-making, and learning. This review first summarizes the anatomical and physiological properties as well as the neuromodulation of IT and ET neurons in the rodent neocortex, and then reviews recent literature on their roles in sensory processing and rodent behavior. Our ultimate goal is to provide a comprehensive understanding of the role of each subclass in cortical function by examining their operational regimes based on their cellular properties.

An Integrated Similarity Analysis of Anatomical and Physical Wood Properties of Tropical Species from India, Mozambique, and East Timor

Tropical species are highly valued timber sources showing a large diversity of wood characteristics. Since there are major concerns regarding the sustainability of these tropical species in many tropical regions, knowledge of the variability in wood properties is therefore a valuable tool to design targeted exploitation and to enlarge the wood resources base, namely by identifying alternatives for CITES-listed species. In this study, 98 tropical wood species belonging to 73 genera from India, Mozambique, and East Timor were investigated regarding wood anatomy and physical properties. Numerical taxonomy, by means of cluster analysis and principal component analysis grouped species with anatomical and physical similarities from different geographical origins. In addition to wood density, ray and vessel characteristics as well as wood moisture and wood shrinkage properties explained the main variability of these species. The contribution of wood color patterns was highlighted as consistently separating the Mozambique woods. A distinct geographical pattern was not observed, reinforcing that species from India, Mozambique, and East Timor show similar anatomical and physical wood properties, which could be useful to increase timber trade diversity. The multivariate analysis showed that species from Mozambique, such as Morus mesozygia, and Millettia stuhlmannii and Swartzia madagascariensis, could be alternatives for the CITES-listed species Cedrela odorata and Dalbergia melanoxylon, respectively.

Morphometric and Biomechanical Comparison of the Scapular Spine and Coracoid Graft in Anterior Shoulder Instability

Background: The scapular spine has been described as a relatively new bone graft alternative used in glenoid augmentation. The classic Latarjet procedure, which transfers the coracoid as a graft, is regarded as the gold standard. The comparison of these 2 techniques has not been fully reported. Purpose: To compare the anatomic and biomechanical properties of glenoid augmentation using scapular spine graft or coracoid graft. Study Design: Controlled laboratory study. Methods: The study used 20 fresh-frozen human cadaveric shoulders. A 25% anterior glenoid defect was created, and the specimens were divided randomly to receive glenoid augmentation by scapular spine or coracoid grafts. For both procedures, the grafts were secured to the glenoid defect with 2 screws. Morphometric data, including the glenoid articular area, amount of restoration, and graft dimensions, were obtained. A biomechanical test was conducted in a direct-loading scenario. The construct stiffness, cyclic displacement, and ultimate failure of each specimen were collected. Results: No significant difference was found in glenoid articular restoration between the scapular spine group and the coracoid group (31% vs 33%, respectively; P = .311). Morphometric analysis indicated that coracoid grafts exhibited significantly greater thickness and height than scapular spine grafts. In biomechanical results, the scapular spine group exhibited significantly greater construct stiffness than the coracoid group (206.3 ± 58.8 vs 148.3 ± 76.0 N/mm, respectively; P = .023). The average failure load in the scapular spine group was not significantly higher than that in the coracoid group. No significant differences in cyclic displacement were found between the 2 techniques. Conclusion: In a simulated 25% anterior glenoid bony defect, a scapular spine graft was comparable with the classic Latarjet procedure in restoring the glenoid articular dimension and exhibited superior construct stiffness in a cadaveric model. Clinical Relevance: The scapular spine may serve as an alternative graft choice in glenoid augmentation surgery considering the amount of articular restoration and initial fixation stability.