Anaerobic Conditions Research Articles

Biological treatment of N-methylpyrrolidone, cyclopentanone, and diethylene glycol monobutyl ether distilled residues and their effects on nitrogen removal in a full-scale wastewater treatment plant

Manufacturing processes in semiconductor and photonics industries involve the use of a significant amount of organic solvents. Recycle and reuse of these solvents produce distillate residues and require treatment before being discharged. This study aimed to evaluate the performance of the biological treatment system in a full-scale wastewater treatment plant that treats wastewater containing distillate residues from the recycling of electronic chemicals. Batch experiments were conducted to investigate the optimal operational conditions for the full-scale wastewater treatment plant. To achieve good nitrogen removal efficiency with effluent ammonia and nitrate concentrations below 20 mg N/L and 50 mg N/L, respectively, it was suggested to control the ammonia concentration and pH of the influent below 500 mg N/L and 8.0, respectively. In addition, the biodegradability of N-methylpyrrolidone, diethylene glycol monobutyl ether, and cyclopentanone distillate residues from the electronic chemicals manufacturing process were evaluated under aerobic, anoxic, and anaerobic conditions. N-methylpyrrolidone and cyclopentanone distillate residues were suggested to be treated under anoxic condition. However, substrate inhibition occurred when using cyclopentanone distillate residue as a carbon source with chemical oxygen demand (COD) levels higher than 866 mg/L and nitrate levels higher than 415 mg N/L. Under aerobic condition, the COD from both N-methylpyrrolidone and cyclopentanone distillate residues could be easily degraded. Nevertheless, a negative effect on nitrification was observed, with a prolonged lag time for ammonia oxidation as the initial COD concentration increased. The specific ammonia oxidation rate and nitrate production rate decreased under high COD concentration contributed by N-methylpyrrolidone and cyclopentanone distillate residues. Furthermore, the biodegradability of diethylene glycol monobutyl ether distillate residue was found to be low under aerobic, anoxic, and anaerobic conditions. With respect to the abundance of nitrogen removal microorganisms in the wastewater treatment plant, results showed that Comammox may have an advantage over ammonia oxidizing bacteria under high pH conditions. In addition, Comammox may have higher resistance to environmental changes. Dominance of Comammox over ammonia oxidizing bacteria under high ammonia condition was first reported in this study.

Exploring rice genotypes for anaerobic germination: Towards sustainable direct seeding

Direct-seeded rice (DSR) production is the primary focus of this study, which explores the diversity of rice genotypes concerning their ability to withstand anaerobic germination conditions. Using advanced statistical analysis, a total of 250 rice cultivars were assessed for several anaerobic germination attributes. Significant variability was observed among genotypes for key traits including germination % (ARC14855, AG 387), shoot length and seedling dry weight, indicating potential donors for anaerobic germination tolerance. Trait association analysis, variability analysis, principal component analysis and cluster analysis were employed to uncover the genetic and phenotypic factors influencing anaerobic germination tolerance. The genotypes of cluster III could be used as donors for anaerobic germination studies, as the genotypes have revealed high average values for all the traits. The findings underscore the importance of genetic variability and heritability in breeding resilient rice varieties suited for DSR cultivation, offering valuable insights for enhancing rice cultivation practices in the face of challenges such as water scarcity and labour shortages. To improve the sustainability and productivity of paddy production systems, this research advances rice breeding procedures that aim to create varieties tolerant to anaerobic conditions.

Fe/Mn (oxyhydr)oxides reductive dissolution promoted by cyanobacterial algal bloom-derived dissolved organic matter caused sediment W release during an algal bloom in Taihu Lake

Tungsten (W) can be toxic to aquatic organisms. However, the spatiotemporal characteristics and controlling factors of W mobility during harmful algal blooms (HABs) have rarely been investigated. In this study, simultaneous changes in soluble W, iron (Fe), manganese (Mn), and ultraviolet absorbance (UV254) in the sediment-water interface (SWI) were measured monthly using high-resolution peeper (HR-Peeper) devices. Laboratory experiments were conducted to verify the effects of environmental factors on W release. From May 2021 to October 2021, the concentration and flux of soluble W were higher than in other months. In addition, from May to October, DMAX (the depth at which the maximum concentration occurs on each profile) was 30–50 mm below the SWI, rather than the maximum depth. Principal component analysis (PCA) also divided the year into two periods, designated W-stable (December 2020, January, March, April and November 2021 with low soluble W concentration) and W-active periods (from May 2021 to October 2021 with high soluble W concentration). Laboratory experiments showed that both warming and anoxic conditions caused simultaneous release of soluble W, Fe(II), Mn, and dissolved organic matter (DOM), with strong correlations among soluble W, Fe(II), Mn. Partial least squares path modeling (PLS-PM) and random forest model showed that DOM directly affected W release or indirectly affected W release through promoting ferromanganese (oxyhydr)oxides reduction under warming and anaerobic conditions. The results of the field investigation showed that, in the W-stable period with low T, high DO, and an oxic SWI, the concentrations of soluble W, Fe, Mn, and DOM were low. The redundancy analysis (RDA) showed that these months were mainly affected by water DO. The significant and strong positive correlation among soluble W, Fe and Mn indicated that soluble W was probably scavenged by Fe/Mn (oxyhydr)oxides in the oxic water during the W-stable period. The W-active period corresponded to the cyanobacterial HABs (cyanoHABs) outbreak, with higher T, lower DO, and a more anoxic SWI. During this period, the concentrations of soluble W, Fe, Mn, and DOM were high and their correlations were stronger. RDA showed that these months were mainly affected by T, UV254, soluble Fe and Mn. These results indicated that reductive dissolution of Fe/Mn (oxyhydr)oxides driven by DOM generated in W-active period, especially cyanoHAB-derived DOM, mainly caused soluble W release. These results reveal the coupling relationship between cyanoHABs and W release and emphasize the need for prevention and control of heavy metal release in eutrophic lakes.

Using a combination of δ13CDIC-DOC-difference in dissolved inorganic and organic carbon, δ2H, and δ18O to localize leachate leaks at landfill sites in China

The investigation of leachate leakage at numerous landfill sites is urgently needed. This study presents an exploration of environmental tracing methods using δ2H and δ13C-difference in dissolved carbon (δ13CDIC-DOC) to localize leachate leak points at landfill sites. δ2H, δ13CDIC, δ13CDOC, δ18O, and an array of physicochemical indices (e.g., total dissolved solids, temperature, and oxidation reduction potential) were monitored in both leachate and groundwater from different zones of a landfill site in China during the year of 2021–2023. Moreover, data for these parameters (i.e., the isotopic composition and physicochemical indices) from twelve published landfill cases were also collected, and these groundwater/leachate data points were located within 1 km away from the landfill boundary. Then statistical analyses, such as Pearson correlation analysis and redundancy analysis (RDA), were performed using both the detected and collected parameters at landfill sites. Consequently, the intensity of interaction between leachate and background groundwater was found to significantly control the isotopic fractionation features of hydrogen and carbon, and both the content of major contamination indicators (total dissolved solids, chemical oxygen demand, and ammoniacal nitrogen) and the oxidation reduction potential were the key impact factors. Accordingly, the water type used to indicate leachate leakage points was determined to be leachate that significantly interacted with the background groundwater or precipitation (LBGP). δ2H showed a perfect linear correlation (0.81 ≤ r2 < 1.0) with δ13CDIC-DOC in leachate under highly anaerobic landfill conditions, and the δ2H &δ13CDIC-DOC combinations in the LBGP were significantly different from those in the other water types. For groundwater with total dissolved solids lower than 1400 mg/L at landfill sites, a strong positive linear correlation (r = 0.83) was revealed between δ13CDIC and δ13CDOC. Based on these insights, δ2H versus δ13CDIC-DOC plots and RDA using δ2H and δ13CDIC-DOC as response variables were proposed to localize leak points at both lined landfills and leachate facilities. These findings further understanding of the isotopic fractionation features of hydrogen, carbon, and oxygen and provide novel environmental tracer methods for investigating leachate leak points at MSW landfill sites.

16S rRNA Analysis of Electrogenic Bacterial Communities from Soil Microbial Fuel Cells

Electrogenic bacteria present in bioelectrical devices such as soil microbial fuel cells (SMFCs) are powered by the oxidation of organic and inorganic compounds due to microbial activity. Fourteen soils randomly selected from Bergen Community College or areas nearby, located in the state of New Jersey, USA, were used to screen for the presence of electrogenic bacteria. SMFCs were incubated at 35–37 °C. Of the 14 samples, 11 generated electricity and enriched electrogenic bacteria. The average optimal electricity production by the top 3 SMFCs was 152 microwatts. The highest electrical production was produced by SMFC-B1C and SMFC-B1B, with 162 and 152 microwatts, respectively. Microbial DNA was extracted from the biofilm grown on the anodes, followed by PCR analysis of the 16S rRNA V3–V4 region. Next-generation sequencing was performed to determine the structure and diversity of the electrogenic microbial community. The top 3 MFCs with the highest electricity production showed a bacterial community predominantly composed of bacteria belonging to the Bacillota and Pseudomonadota phyla with a significant presence of Euryarcheota members of methanogenic archaea. SMFC-B1C showed a more diverse electrogenic community, followed by SMFC-B1B and SMFC-B1. When analyzing the top 10 bacteria in the SMFCs, 67 percent belonged to the class Clostridia, indicating that anaerobic conditions were required to enrich electrogenic bacterial numbers and optimize electrical production. The ongoing optimization of SMFCs will provide better production of electricity and continuous enhancement of microbial activity to sustain longer operational times and higher levels of electrogenesis. The characterization of electrogenic microbial communities will provide valuable information to understand the contribution of different populations to the production of electricity in bioelectrical devices.

Exploring the impact of magnetic fields on biomass production efficiency under aerobic and anaerobic batch fermentation of Saccharomyces cerevisiae

In this work, the effect of moderate electromagnetic fields (2.5, 10, and 15 mT) was studied using an immersed coil inserted directly into a bioreactor on batch cultivation of yeast under both aerobic and anaerobic conditions. Throughout the cultivation, parameters, including CO2 levels, O2 saturation, nitrogen consumption, glucose uptake, ethanol production, and yeast growth (using OD 600 measurements at 1-h intervals), were analysed. The results showed that 10 and 15 mT magnetic fields not only statistically significantly boosted and sped up biomass production (by 38–70%), but also accelerated overall metabolism, accelerating glucose, oxygen, and nitrogen consumption, by 1–2 h. The carbon balance analysis revealed an acceleration in ethanol and glycerol production, albeit with final concentrations by 22–28% lower, with a more pronounced effect in aerobic cultivation. These findings suggest that magnetic fields shift the metabolic balance toward biomass formation rather than ethanol production, showcasing their potential to modulate yeast metabolism. Considering coil heating, opting for the 10 mT magnetic field is preferable due to its lower heat generation. In these terms, we propose that magnetic field can be used as novel tool to increase biomass yield and accelerate yeast metabolism.

The Fe-S cluster biosynthesis in Enterococcus faecium is essential for anaerobic growth and gastrointestinal colonization

ABSTRACT The facultative anaerobic Gram-positive bacterium Enterococcus faecium is a ubiquitous member of the human gut microbiota. However, it has gradually evolved into a pathogenic and multidrug resistant lineage that causes nosocomial infections. The establishment of high-level intestinal colonization by enterococci represents a critical step of infection. The majority of current research on Enterococcus has been conducted under aerobic conditions, while limited attention has been given to its physiological characteristics in anaerobic environments, which reflects its natural colonization niche in the gut. In this study, a high-density transposon mutant library containing 26,620 distinct insertion sites was constructed. Tn-seq analysis identified six genes that significantly contribute to growth under anaerobic conditions. Under anaerobic conditions, deletion of sufB (encoding Fe-S cluster assembly protein B) results in more extensive and significant impairments on carbohydrate metabolism compared to aerobic conditions. Consistently, the pathways involved in this utilization-restricted carbohydrates were mostly expressed at significantly lower levels in mutant compared to wild-type under anaerobic conditions. Moreover, deletion of sufB or pflA (encoding pyruvate formate lyase-activating protein A) led to failure of gastrointestinal colonization in mice. These findings contribute to our understanding of the mechanisms by which E. faecium maintains proliferation under anaerobic conditions and establishes colonization in the gut.

Construction of Conjugated Organic Polymers for Efficient Photocatalytic Hydrogen Peroxide Generation with Adequate Utilization of Water Oxidation.

The visible-light-driven photocatalytic production of hydrogen peroxide (H2O2) is currently an emerging approach for transforming solar energy into chemical energy. In general, the photocatalytic process for producing H2O2 includes two pathways: the water oxidation reaction (WOR) and the oxygen reduction reaction (ORR). However, the utilization efficiency of ORR surpasses that of WOR, leading to a discrepancy with the low oxygen levels in natural water and thereby impeding their practical application. Herein, we report a novel donor-bridge-acceptor (D-B-A) organic polymer conjugated by the Sonogashira-Hagihara coupling reaction with tetraphenylethene (TPE) units as the electron donors, acetylene (A) as the connectors and pyrene (P) moieties as the electron acceptors. Notably, the resulting TPE-A-P exhibits a remarkable solar-to-chemical conversion of 1.65% and a high BET-specific surface area (1132 m2·g-1). Furthermore, even under anaerobic conditions, it demonstrates an impressive H2O2 photosynthetic efficiency of 1770 μmol g-1 h-1, exceeding the vast majority of previously reported photosynthetic systems of H2O2. The outstanding performance is attributed to the effective separation of electrons and holes, along with the presence of sufficient reaction sites facilitated by the incorporation of alkynyl electronic bridges. This protocol presents a successful method for generating H2O2 via a water oxidation reaction, signifying a significant advancement towards practical applications in the natural environment.

Iron efflux by IetA enhances β-lactam aztreonam resistance and is linked to oxidative stress through cellular respiration in Riemerella anatipestifer.

Riemerella anatipestifer encodes an iron acquisition system, but whether it encodes the iron efflux pump and its role in antibiotic resistance are largely unknown. To screen and identify an iron efflux gene in R. anatipestifer and determine whether and how the iron efflux gene is involved in antibiotic resistance. In this study, gene knockout, streptonigrin susceptibility assay and inductively coupled plasma mass spectrometry were used to screen for the iron efflux gene ietA. The MIC measurements, scanning electron microscopy and reactive oxygen species (ROS) detection were used to verify the role of IetA in aztreonam resistance and its mechanism. Mortality and colonization assay were used to investigate the role of IetA in virulence. The deletion mutant ΔietA showed heightened susceptibility to streptonigrin, and prominent intracellular iron accumulation was observed in ΔfurΔietA under excess iron conditions. Additionally, ΔietA exhibited increased sensitivity to H2O2-produced oxidative stress. Under aerobic conditions with abundant iron, ΔietA displayed increased susceptibility to the β-lactam antibiotic aztreonam due to heightened ROS production. However, the killing efficacy of aztreonam was diminished in both WT and ΔietA under anaerobic or iron restriction conditions. Further experiments demonstrated that the efficiency of aztreonam against ΔietA was dependent on respiratory complexes Ⅰ and Ⅱ. Finally, in a duckling model, ΔietA had reduced virulence compared with the WT. Iron efflux is critical to alleviate oxidative stress damage and β-lactam aztreonam killing in R. anatipestifer, which is linked by cellular respiration.

A Review on Piezoelectric-mediated Mechanoredox Reactions by Ball Milling in Organic Synthesis

Abstract: Recently, the concept of mechanoredox chemistry has been proposed and welldeveloped in organic synthesis. Mechanoredox chemistry is conceptually similar to a photocatalyst reaction system, where piezoelectric materials are introduced to the reaction system in a manner analogous to photoredox catalysis. These reactions feature the ability to generate high-value radicals that do not require harsh reaction conditions of anhydrous and anaerobic conditions, an expensive photocatalyst, and the use of solvents, which renders these transformations highly industrially applicable. In addition, mechanoredox chemistry is also an emerging interdisciplinary research field that combines material chemistry with synthetic chemistry to create more useful reactions. This review provides a comprehensive summary of progress to date in the specific transformation and related mechanisms of piezoelectric- mediated mechanoredox reactions by ball milling in organic synthesis.

Evaluation of Antimicrobial Susceptibility and Resistance Patterns of Treponema denticola Isolated From Periodontal Disease: An In Vitro Study.

Background Periodontal disease poses a significant oral health challenge, involving inflammatory conditions impacting tooth-supporting structures. Treponema denticola, a "red complex" organism, plays a crucial role in periodontal pathogenesis, forming biofilms in subgingival environments and contributing to dysbiosis. Antimicrobial therapy is pivotal in managing periodontal disease, requiring a nuanced understanding of susceptibility patterns exhibited by key pathogens like T. denticola. Aims and objectives This study aims to investigate the antimicrobial susceptibility and resistance profiles of Treponema denticola, a prominent bacterium in periodontal disease, by examining its responses to various antimicrobial agents commonly used in periodontal therapy. Methodology Plaque samples were meticulously collected from individuals diagnosed with periodontal disease to ensure a diverse representation of the oral microbiome. All the samples were cultured, and red complex bacteria were isolated under anaerobic culture. Treponema denticola isolates were cultured from these samples under anaerobic conditions, and molecular techniques were employed for species identification. A comprehensive panel of antimicrobial agents was selected to assess the response of Treponema denticola. In vitro antimicrobial susceptibility testing (AST) was conducted using the antimicrobial gradient method, employing a hybrid approach combining elements of disk-diffusion and dilution methods. Results Treponema denticola had exhibitedresistance to metronidazole, a commonly used antibiotic effective against anaerobic bacteria, emphasizing limitations in its applicability. However, the bacterium displayed sensitivity to tetracycline, imipenem, cefoperazone, chloramphenicol, clindamycin, and moxifloxacin, offering diverse therapeutic options. The antimicrobial gradient strip test provided detailed minimum inhibitory concentration (MIC) values, contributing to a nuanced understanding of susceptibility and resistance patterns. Conclusion This study significantly advances our understanding of Treponema denticola's antimicrobial susceptibility and resistance profiles in the context of periodontal disease. The findings underscore the importance of tailored treatment strategies and contribute to broader efforts in antimicrobial stewardship, aligning with global initiatives to combat antibiotic resistance. This research lays the foundation for more effective and personalized approaches to periodontal care, emphasizing the intricate microbial dynamics associated with periodontal health and disease.

Biotite dissolution kinetics at pH 4 and 6.5 under anaerobic conditions and the release of dissolved Fe(II)

Dissolution of biotite, the main Fe-bearing mineral in granitic bedrock, is of particular importance for the remediation of reducing conditions after the ingress of oxygen, such as after mining activities or the construction of deep repositories for toxic waste. This study investigated the leaching of biotite of size fraction 0.053–0.075 mm under anaerobic conditions at room temperature and pH 4 and 6.5 for a maximum of 160 days. The changes in the concentrations of the major elements in the leaching solutions were monitored. In addition, Fe(II) was analysed separately. pH-independent rate coefficients kH+ were 4.8∙10−10, 6.9∙10−10, 6.3∙10−11, and 1.0∙10−12 mol1-n m−2 s-1, for Fe, Fe(II), Mn, and Si, respectively. The corresponding proton reaction orders nH+ were 0.61, 0.63, 0.33, and 0.09, respectively. The corresponding parameters for Al were not evaluated because of a suspected gibbsite precipitation at pH 6.5. The dissolution of biotite was found to be incongruent (non-stoichiometric) with respect to both the dissolving elements and the pH value. At pH 4, the dissolution was dominated by the octahedral layer element Fe, whereas at pH 6.5, the dissolution of the tetrahedral element Si dominated. There was no evidence of secondary phase formation, and the biotite leaching rates were consistent with those reported in previous studies conducted under aerobic conditions. In addition, the Fe(III)/Fetot ratio of biotite remained essentially unchanged before and after the experiment. This indicates that the anaerobic conditions alone have little effect on the rate and nature of biotite dissolution, although they may influence vermiculite formation. Therefore, biotite dissolution rates previously obtained under aerobic conditions may also be valid under anaerobic conditions.

Quantifying Yersinia pseudotuberculosis Type III Secretion System Activity Following Iron Starvation and Anaerobic Growth.

A key virulence mechanism for many Gram-negative pathogens is the type III secretion system (T3SS), a needle-like appendage that translocates cytotoxic or immunomodulatory effector proteins into host cells. The T3SS is a target for antimicrobial discovery campaigns since it is accessible extracellularly and largely absent from non-pathogenic bacteria. Recent studies demonstrated that the T3SS of Yersinia and Salmonella are regulated by factors responsive to iron and oxygen, which are important niche-specific signals encountered during mammalian infection. Described here is a method for iron starvation of Yersinia pseudotuberculosis, with subsequent optional supplementation of inorganic iron. To assess the impact of oxygen availability, this iron starvation process is demonstrated under both aerobic and anaerobic conditions. Finally, incubating the cultures at the mammalian host temperature of 37 °C induces T3SS expression and allows quantification of Yersinia T3SS activity by visualizing effector proteins released into the supernatant. The steps detailed here offer an advantage over the use of iron chelators in the absence of iron starvation, which is insufficient for inducing robust iron starvation, presumably due to efficient Yersinia iron uptake and scavenging systems. Likewise, acid-washing laboratory glassware is detailed to ensure the removal of residual iron, which is essential for inducing robust iron starvation. Additionally, using a chelating agent is described to remove residual iron from media, and culturing the bacteria for several generations in the absence of iron to deplete bacterial iron stores. By incorporating standard protocols of trichloroacetic acid-induced protein precipitation, SDS-PAGE, and silver staining, this procedure demonstrates accessible ways to measure T3SS activity. While this procedure is optimized for Y. pseudotuberculosis, it offers a framework for studies in pathogens with similar robust iron uptake systems. In the age of antibiotic resistance, these methods can be expanded to assess the efficacy of antimicrobial compounds targeting the T3SS under host-relevant conditions.

Small molecule MarR modulators potentiate metronidazole antibiotic activity in aerobic E. coli by inducing activation by the nitroreductase NfsA

Antibiotic resistant Enterobacterales pose a major threat to healthcare systems worldwide, necessitating the development of novel strategies to fight such hard-to-kill bacteria. One potential approach is to develop molecules that force bacteria to hyper-activate prodrug antibiotics, thus rendering them more effective. In the present work, we aimed to obtain proof-of-concept data to support that small molecules targeting transcriptional regulators can potentiate the antibiotic activity of the prodrug metronidazole (MTZ) against Escherichia coli under aerobic conditions. By screening a chemical library of small molecules a series of structurally related molecules were identified that had little inherent antibiotic activity, but showed substantial activity in combination with ineffective concentrations of MTZ. Transcriptome analyses, functional genetics, thermal shift assays and electrophoretic mobility shift assays were then used to demonstrate that these MTZ boosters target the transcriptional repressor MarR, resulting in the up-regulation of the marRAB operon and its downstream MarA regulon. The associated upregulation of the flavin-containing nitro-reductase; NfsA was then shown to be critical for the booster mediated potentiation of MTZ antibiotic activity. Transcriptomic studies, biochemical assays and electron paramagnetic resonance measurements were then used to show that under aerobic conditions, NfsA catalyzed 1-electron reduction of MTZ to the MTZ radical anion which in turn induced lethal DNA damage in E. coli. This work reports the first example of prodrug boosting in Enterobacterales by transcriptional modulators and highlights that MTZ antibiotic activity can be chemically induced under anaerobic growth conditions.

A SIMPLE, QUICK, AND ECONOMICAL METHOD FOR IN VITRO CULTIVATION OF ECHINOCOCCUS MULTILOCULARIS METACESTODE AND GENERATION OF PRIMARY CELLS.

Alveolar echinococcosis is considered to be one of the most potentially lethal parasitic zoonotic diseases. However, the molecular mechanisms by which Echinococcus multilocularis interacts with hosts are poorly understood, hindering the prevention and treatment of this disease. Due to the great advantages of cell culture systems for molecular research, numerous attempts have been made to establish primary cell cultures for E. multilocularis. In this study we developed a simple, rapid, and economical method that allows E. multilocularis metacestode tissue blocks to generate daughter vesicles without the continuous presence of host feeder cells in a regular medium. We performed anaerobic, hypoxic (1% O2), normoxic, and semi-anaerobic (in sealed tubes) cultures and found that E. multilocularis metacestode tissues can produce daughter vesicles only in the sealed tubes after 4 wk of incubation. The daughter vesicles cultivated in this system were remarkably enlarged under anaerobic conditions after 8 days of culture, whereas vesicles cultured under hypoxic (1% O2) and normoxic conditions showed only a mild increase in volume. Our in vitro cultivated vesicles showed strong viability and could be used to test antiparasitic drugs, isolate primary cells, and infect animals.

Stearate from Steel Wire Drawing Processes as a Resource

STAR (Stearato dai processi di Trafilatura del filo di Acciaio come Risorsa) project, funded by the Italian Ministry of the Environment, has the ambition of redesigning the use and life cycle of waste stearates from the steel wire drawing industry, promoting the circular life of such materials. Waste stearate is having a strong impact on the economic and environmental sustainability of the steel wire production processes, adding up to the increasing pressure that industry has been facing in the last years: the pandemic crisis, the raw material price increase, the commercial restrictions related to the Ukraine and other regional conflicts.The short-term goal of the project is to develop a technology to be applied on a local scale and the long-term one is expanding it internationally. The benefits are both environmental, due to the reduction of waste and related impact on the environment, and economic, due to stearate valorization.First, stearate waste from wire drawing process were characterized in order to valorize them in the production of new materials or as an energy source.Samples of stearate waste were provided by wire drawing industries and the analyses showed that the humidity content was always low (0.1 – 5 %), while the volatile solids (VS) content varied from 2 to 70%, covering a very wide range and thus indicating a variable organic matter content. The mean higher heating value was 26 MJ/kg and the Chemical Oxygen Demand (COD) 500 mg O2/g and correlated well with VS. pH was strongly basic (&gt;11).Anaerobic digestion can surely have an important role in valorization, as it allows to recover energy and to produce a stabilized digestate for which a further use can be studied, according to its properties. Preliminary BMP tests (BMP = Biomethane Potential) determined a biomethane production in the range 500-900 L/kgVS, much higher than the production from animal waste (around 400 L/kgVS). The toxicity of the digestate was assessed by Microtox® assay and was negligible. This finding supports the hypothesis that recalcitrant compounds, which do not undergo degradation in anaerobic conditions, are not toxic.

Significant roles of reactive bromine intermediates on organic co-contaminants degradation during bromate reduction in electrochemically activated (bi)sulfite process

(Bi)sulfite radical-based advanced reduction process (HSO3/SO3−-ARP) was an emerging technology to simultaneously reduce BrO3− and oxidize organic co-contaminants. However, the evolution of reactive bromine intermediates (RBrIs) and their role on degradation of organics has not been investigated. This study utilized an electrochemically activated (bi)sulfite process, a novel HSO3/SO3−-ARP for BrO3− reduction (EA-S (IV)-BrO3− process), to confirm the generation of RBrIs and elaborate the degradation mechanism of organic contaminants. Firstly, the generated RBrIs responsible for organic pollutants degradation were bromine dioxide (BrO2), bromine monoxide (BrO) and free bromine (HBrO/BrO−). Then, the species-specific second-order rate constants for RBrIs reacting with structurally diverse phenolic contaminants (PCs) (kBrO2, PCs = 107−1010 M−1 s−1 and kBrO, PCs = 106−1010 M−1 s−1) were obtained by fitting with the experimental data using a first-principle-based kinetic model of EA-S (IV)-BrO3− process in anaerobic condition. Notably, at pH 2 and 6, HSO3 (33–95 %) and BrO2 (5–66 %) dominated PCs degradation. Conversely, at pH 10, BrO (48–66 %), SO3− (27–42 %) and BrO2 (5–12 %) were the major radicals due to high reaction rates between RBrIs and dissociated PCs. The role of HBrO/BrO− was minimal (<1 %). Finally, negative linear relationships between kBrO2/BrO/HBrO, PCs and Hammett constants (Σσ+) indicated that PCs with electron-donating groups were more sensitive to RBrIs. BrO and BrO2 dominated oxidation of PCs via electron transfer, hydroxylation and ketonization, while the formation of brominated products attributed to HOBr/BrO− were negligible. This study advanced the understanding of BrO3− reduction process and the significant role of RBrIs on degradation of organic co-contaminants.

Chemical and biological effects of zero-valent iron (ZVI) concentration on in-situ production of H2 from ZVI and bioconversion of CO2 into CH4 under anaerobic conditions

The conversion of carbon dioxide (CO2) to methane (CH4) is a strategy for sequestering CO2. Zero-valent iron (ZVI) has been proposed as an alternative electron donor for the CO2 reduction to CH4. In this study, the effects of ZVI concentrations on the abiotic production of H2 (without the action of microorganisms) in the first part and on the biological conversion of CO2 to CH4 using ZVI as a direct electron donor in the second part were examined. In the abiotic H2 production, the increase in the ZVI concentration from 16 to 32, 64, and 96 g/L was found to have positive effects on both the amounts of H2 generated and the rates of H2 production because the extent of ZVI oxidation positively correlates with increasing surface area. Nevertheless, the increase in ZVI concentration from 96 to 224 g/L did not benefit the H2 production because the ZVI dissolution was suppressed by the increasing aqueous pH above 10. In the bioconversion of CO2 to CH4 using ZVI as an electron donor, the main methanogenesis pathway occurred via hydrogenotrophic methanogenesis at pH 8.7–9.5 driven by the genus Methanobacterium of the class Methanobacteria. At ZVI concentrations of 64 g/L and above, the production of volatile fatty acid (VFA) became clear. Acetate was the main VFA, indicating the induction of homoacetogenesis at ZVI concentrations of 64 g/L and above. In addition, the presence of propionate as the second major VFA suggests the production of propionate from CO2 and acetate under conditions with high H2 partial pressure. The results indicated that the pathway for ZVI/CO2 conversion to CH4 was competitive between hydrogenotrophic methanogenesis and homoacetogenesis.

Influence of storage length on the nutritive value of baleage

AbstractHigh‐quality forages can benefit from being harvested as baleage when the environmental conditions are not favorable for dry hay production. Currently, it is recommended that baleage should be fed within 9‐months post‐harvest; however, mild winters can reduce the demand for these stored forages. Data are limited on the changes in nutritive value of baleage stored beyond the recommended timepoint. Therefore, the objective was to determine the effect of storage length on nutritive value of forage harvested and stored as baleage. This study evaluated baleage harvested from 2016 to 2018 in Tifton, GA, consisting of either bermudagrass (Cynodon dactylon L. Pers.), or a mixture of bermudagrass and alfalfa (Medicago sativa L.). Baleage was sampled for nutritive value analysis at 6‐weeks and 9‐ and 12‐months post‐harvest, with a subset of bales sampled at 24 months. Regardless of forage, crude protein, total digestible nutrients, and in‐vitro dry matter digestibility at 48 h were not impacted in bales sampled up to 12‐months post‐harvest (p &gt; 0.07). However, acid detergent fiber increased when baleage was stored beyond 6 weeks but did not change from 9 to 12 months (p &lt; 0.01). In the subset of bales stored up to 24‐months post‐harvest, all nutritive value parameters evaluated were negatively impacted (p &lt; 0.01). The prolonged storage period may negatively affect the baleage plastic integrity, resulting in a decline in nutritive value if anaerobic conditions are not maintained. Future research is warranted to evaluate the changes in the fermentation profile of baleage under extended storage conditions.

Assessing environmental and human health risks: Insight from the enantioselective metabolism and degradation of fenpropidin

Fenpropidin (FPD), a widely employed chiral fungicide, is frequently detected in diverse environments. In an in vitro rat liver microsomes cultivation (RLMs), the metabolism exhibited the order of R-FPD > S-FPD, with respective half-lives of 10.42 ± 0.11 and 12.06 ± 0.15 min, aligning with kinetic analysis results. CYP3A2 has been demonstrated to be the most significant oxidative enzyme through CYP450 enzyme inhibition experiments. Molecular dynamics simulations unveiled the enantioselective metabolic mechanism, demonstrating that R-FPD forms hydrogen bonds with the CYP3A2 protein, resulting in a higher binding affinity (−6.58 kcal mol−1) than S-FPD. Seven new metabolites were identified by Liquid chromatography time-of-flight high-resolution mass spectrometry, which were mainly generated through oxidation, reduction, hydroxylation, and N-dealkylation reactions. The toxicity of the major metabolites predicted by the TEST procedure was found to be stronger than the predicted toxicity of FPD. Moreover, the enantioselective fate of FPD was studied by examining its degradation in three soils with varying physical and chemical properties under aerobic, anaerobic, and sterile conditions. Enantioselective degradation of FPD occurred in soils without enantiomeric transformation, displaying a preference for R-FPD degradation. R-FPD is a low-risk stereoisomer both in the environment and in mammals. The research presented a systematic and comprehensive method for analyzing the metabolic and degradation system of FPD enantiomers. This approach aids in understanding the behavior of FPD in the environment and provides valuable insights into their potential risks to human health.