Amphiphilic Block Copolymer Poly Research Articles

Design of Polymeric Nanoparticles for Theranostic Delivery of Capsaicin as Anti-Cancer Drug and Fluorescent Nitrogen-Doped Graphene Quantum Dots.

In recent years, multifunctional nanocarriers that provide simultaneous drug delivery and imaging have attracted enormous attention, especially in cancer treatment. In this research, we designed a biocompatible fluorescent multifunctional nanocarrier for the co-delivery of capsaicin (CPS) and nitrogen-doped graphene quantum dots (N-GQDs) using the pH sensitive amphiphilic block copolymer (poly(2-ethyl-2-oxazoline)-b-poly(ε-caprolactone), PEtOx-b-PCL). The effects of the critical formulation parameters (the amount of copolymer, the concentration of poly(vinyl alcohol) (PVA) as a stabilizing agent in the inner aqueous phase, and volume of the inner phase) were evaluated to achieve optimal nanoparticle properties using Central Composite Design (CCD). The optimized nanoparticles demonstrated a desirable size distribution (167.8±1.4nm) with a negative surface charge (-19.9±0.4) and a suitable loading capacity for capsaicin (70.80±0.05%). The CPS & N-GQD NPs were found to have remarkable toxicity on human breast adenocarcinoma cell line (MCF-7). The solid fluorescent signal was acquired from cells containing multifunctional nanoparticles, according to the confocal microscope imaging results, confirming the significant cellular uptake. This research illustrates the enormous potential for cellular imaging and enhanced cancer therapy offered by multifunctional nanocarriers that combine drug substances with the novel fluorescent agents. This article is protected by copyright. All rights reserved.

Amphiphilic block copolymers of poly(N-vinyl pyrrolidone) and poly(isobornyl methacrylate). Synthesis, characterization and micellization behaviour in selective solvents

Block copolymers of N-vinyl pyrrolidone (NVP) and isobornyl methacrylate (IBMA), PIBMA-b-PNVP, were prepared employing the RAFT polymerization technique. IBMA was polymerized first followed by the polymerization of NVP in the presence of a suitable fluoroalcohol to accelerate the crossover reaction. The copolymers were characterized by Size Exclusion Chromatography (SEC) and NMR spectroscopy. The thermal stability of these copolymers was studied via Thermogravimetric Analysis (TGA) and Differential Thermogravimetry (DTG), showing unique characteristics compared to the respective PIBMA and PNVP homopolymers. The micellization behavior was studied in THF, which is a selective solvent for the PIBMA blocks. The corresponding statistical copolymers, PNVP-stat-PIBMA were also examined to elucidate the effect of the macromolecular architecture on the micellar properties. Furthermore, the self-assembly behavior in aqueous solutions was studied for the PIBMA-b-PNVP block copolymers. Water is a selective solvent for the PNVP blocks. Static (SLS) and dynamic light scattering (DLS) were employed to study the micellar assemblies. The encapsulation of the hydrophobic compound curcumin within the micellar core of the micellar structures in aqueous solutions was investigated by UV–Vis spectroscopy and DLS measurements.

Tunable self-assembly of lipid-based block polymeric micelles with temperature-sensitive poly(vinylcaprolactam) shell for effective anticancer drug delivery

Lipids, as naturally occurring biomolecules have emerged as promising carriers for delivering various therapeutic agents. However, only a few attempts have been made in terms of their applications as amphiphilic block copolymers for anticancer drug delivery. In this work, a biocompatible micellar drug delivery system with fatty acid-based polymer core and temperature-sensitive shell was developed. A series of amphiphilic block copolymers poly(vinyl stearate)/poly(vinyl laurate)-b-poly(N-vinylcaprolactam) (PVS/PVL-b-PNVCL) were synthesized via microwave-assisted reversible addition-fragmentation chain transfer polymerization in a controlled fashion. By varying the fatty acid type and hydrophilic/hydrophobic block lengths, the self-assembly behaviour of the block copolymer micelles proved to be highly tunable in terms of their morphology and particle size. Nile Red and hydrophobic anticancer drug doxorubicin (DOX) were effectively incorporated into the micelles, demonstrating high drug loading capacity, good serum stability, and temperature-dependent drug release characteristics of the polymeric micelles. In vitro studies using cell models revealed that blank PVS -b-PNVCL micelles are biocompatible with different cell lines, while DOX-loaded micelles were internalized into and accumulated in the cells, showing a high cytotoxic effect against HeLa cells. These findings suggest an opportunity for the development of safe and efficient lipid-based micellar system for smart drug delivery and cancer treatments.

Selective Uptake Into Inflamed Human Intestinal Tissue and Immune Cell Targeting by Wormlike Polymer Micelles.

Inflammatory bowel disease (IBD)has become a globally prevalent chronic disease with no causal therapeutic options. Targeted drug delivery systems with selectivity for inflamed areas in the gastrointestinal tract promise to reduce severe drug-related side effects. By creating three distinct nanostructures (vesicles, spherical, and wormlike micelles) from the same amphiphilic block copolymer poly(butyl acrylate)-block-poly(ethylene oxide) (PBA-b-PEO), the effect of nanoparticle shape on human mucosal penetration is systematically identified. An Ussing chamber technique is established to perform the ex vivo experiments on human colonic biopsies, demonstrating that the shape of polymeric nanostructures represents a rarely addressed key to tissue selectivity required for efficient IBD treatment. Wormlike micelles specifically enter inflamed mucosa from patients with IBD, but no significant uptake is observed in healthy tissue. Spheres (≈25nm) and vesicles (≈120nm) enter either both normal and inflamed tissue types or do not penetrate any tissue. According to quantitative image analysis, the wormlike nanoparticles localize mainly within immune cells, facilitating specific targeting, which is crucial for further increasing the efficacy of IBD treatment. These findings therefore demonstrate the untapped potential of wormlike nanoparticles not only to selectively target the inflamed human mucosa, but also to target key pro-inflammatory cells.

Block copolymer-derived recessed nanodisk-array electrodes for electrochemical detection of β-lactam antibiotics

Antimicrobial resistance (AMR) is one of the major socio-economic factors contributing to public health. β-lactams are most commonly prescribed drugs for variety of bacterial infections. Frequent use of antibiotics leads to AMR in humans and animals. The present work is focused on developing an electro-immunosensor to control and regulate the excessive use of antibiotics in animal-based food products. An amphiphilic block co-polymer poly(ethylene oxide-block-methyl methacrylate)(PEO-b-PMMA) was used to fabricate recessed nano-disk array electrode (RNE) and immobilized with Pen-Ab and Cef-Ab antibodies. The Limit of detection (LOD) of RNE working electrode was found to be 14.8 pM for penicillin and 13.8 pM for cefalexin with good selectivity in presence of non-specific antibiotics. Fabricated RNE electrode could detect trace amounts of spiked antigen in real samples of milk, egg and meat extract. Further, mesoporous thin film and microarrays can eventually be used to develop point-of-care diagnosis of antibiotics in animal-based food products.

In Situ and Ex Situ Studies of Ring-Like Assembly of Silica Nanoparticles in the Presence of Poly(propylene oxide)-Poly(ethylene oxide) Block Copolymers.

Block copolymer-mediated self-assembly of colloidal nanoparticles has attracted great attention for fabricating various nanoparticle arrays. We have previously shown that silica nanoparticles (SNPs) assemble into ring-like nanostructures in the presence of temperature-responsive block copolymers poly[(2-ethoxyethyl vinyl ether)-block-(2-methoxyethyl vinyl ether)] (PEOVE-PMOVE) in an aqueous phase. The ring-like nanostructures formed within an aggregate of PEOVE-PMOVE when the temperature was increased to 45 °C, at which the polymer is amphiphilic. Herein, we report that SNPs assemble into ring-like nanostructures even with a different temperature-responsive, amphiphilic block copolymer poly(propylene oxide)-block-poly(ethylene oxide) (PPO-PEO) at 45 °C. Field-emission scanning electron microscopy for SNP assemblies that were spin-coated on a substrate indicated that SNP first assembled into chain-like nanostructures and then bent into closed loops over several days. In contrast, in situ small-angle X-ray diffraction measurements revealed the formation of SNP nanorings within 75 s at 45 °C in the liquid phase. These results indicated that ring-like assembly of SNPs occurs quickly in the liquid phase, but the slow formation of Si-O-Si bonds between SNPs leads to their structure being destroyed by spin-coating. Intriguingly, SNPs with a diameter of 15 nm form a well-defined nanoring structure, with five SNPs located at the vertex points of a regular pentagon. Additionally, small-angle neutron scattering, where the contrast of the solvent (a mixture of H2O and D2O) matches that of SNPs, clarified that SNPs are contained within the spherical micelle formed from PPO-PEO. This work offers a facile and versatile approach to preparing ring-like arrays from inorganic colloidal nanoparticles, leading to applications including sensing, catalysis, and nanoelectronics.

Synthesis and Micellization Behavior of Amphiphilic Block Copolymers of Poly(N-vinyl Pyrrolidone) and Poly(Benzyl Methacrylate): Block versus Statistical Copolymers.

Block copolymers of N-vinyl pyrrolidone (NVP) and benzyl methacrylate (BzMA), PNVP-b-PBzMA, were prepared by RAFT polymerization techniques and sequential addition of monomers. The copolymers were characterized by Size Exclusion Chromatography (SEC) and NMR spectroscopy. Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA) and Differential Thermogravimetry (DTG) were employed to study the thermal properties of these copolymers. The micellization behavior in THF, which is a selective solvent for the PBzMA blocks, was examined. For comparison the self-assembly properties of the corresponding statistical copolymers, PNVP-stat-PBzMA, were studied. In addition, the association behavior in aqueous solutions was analyzed for the block copolymers, PNVP-b-PBzMA. In this case, the solvent is selective for the PNVP blocks. Dilute solution viscometry, static (SLS) and dynamic light scattering (DLS) were employed as the tools to investigate the micellar assemblies. The efficient encapsulation of the hydrophobic curcumin within the micellar core of the supramolecular structures in aqueous solutions was demonstrated by UV-Vis spectroscopy and DLS measurements.

Construction of micro/macro‐scale Janus polypeptoid‐based two‐dimensional structures at the air–water interface

AbstractJanus two‐dimensional (2D) polymeric materials present asymmetric dual surfaces that enable a variety of applications of biosensors, catalysts, drug delivery, etc. This work reports the evaporation‐induced interfacial self‐assembly of amphiphilic block copolymer poly(ethylene glycol)‐b‐poly(N‐(2‐phenylethyl) glycine) (PEG‐b‐PNPE) at the air–water interface. The PEG‐b‐PNPE was initially assembled into a monolayer with a uniform thickness of ~2.5 ± 0.1 nm, which was mechanically compressed into a bilayer structure by Langmuir–Blodgett (LB) technology as surface pressure is exceeding the critical collapse pressure. Both monolayer and bilayer nanostructure span over hundreds of microns in both dimensions. The surface contact angle of the sample was measured by dynamic/static optical contact angle/interface tensiometer, which showed asymmetric wettability on the air side and the water side. The evolution from a monolayer to a bilayer was further tracked by an atomic force microscope. By the evaporation‐induced interfacial self‐assembly at the air–water interface, we also prepared macroscopic Janus films with a diameter of ~3.5 mm. The obtained micro/macro‐scale 2D materials have potential applications in nanoscience and biomedicine.

Novel Aggregation-Induced Emission Fluorescent Molecule for Platinum(IV) Ion-Selective Recognition and Imaging of Controlled Release in Cells.

The loading, delivery, and release of Pt(IV) precursors in living organisms are important aspects of exploring the development of platinum drugs. In recent years, the biological application of the fluorescent sensors to platinum drugs has been insufficient to meet the study of Pt(IV) precursors. It is urgent to design and develop a biocompatible, multifunctional fluorescent sensor for the study of loading, transport, and release of Pt(IV) ions. Herein, we report a fluorescent molecule (E)-6-(diethylamino)-N'-(4-(diphenylamino) benzylidene)-2-oxo-2H-chromene-3 carbohydrazide (CHTPA). CHTPA has good sensitivity and selectivity to Pt(IV) when the water content is 5%, and significant increase of the fluorescence emission intensity of CHTPA is observed with Pt(IV) concentration. The sensing mechanism is attributed to photo-induced electron transfer, which is verified by X-ray absorption near edge spectroscopy spectra, UV-vis absorption spectroscopy, 1H NMR spectra, and Fourier transform infrared spectra. Furthermore, the CHTPA-Pt(IV) complex is able to release Pt(IV) in aqueous solution, and the green fluorescence of CHTPA based on the aggregation-induced emission effect can be observed. Inspired by these, the amphiphilic block copolymer poly(ethyloxide)-block-polystyrene (PEO-b-PS) is used to prepare the nonconjugated polymer dots (Pdots). The experimental results show that Pdots can effectively slow down the release speed of Pt(IV) in aqueous solution and it has a great monodispersity in aqueous solution. Meanwhile, Pdots show low cytotoxicity, and this is favorable for intracellular applications. The investigation of cellular imaging indicates that these Pdots can act as a carrier to deliver Pt(IV) into MCF-7 cells for visualized delivery and sustained release of platinum(IV) ions. Therefore, this study provides a new avenue to design and develop a biocompatible multifunctional fluorescent sensor for studying the loading, delivery, and release of Pt(IV) in cells.

Reactive Oxygen Species-Responsive Polypeptide Drug Delivery System Targeted Activated Hepatic Stellate Cells to Ameliorate Liver Fibrosis.

Hepatic fibrosis is a chronic liver disease that lacks effective pharmacotherapeutic treatments. As part of the disease's mechanism, hepatic stellate cells (HSCs) are activated by damage-related stimuli to secrete excessive extracellular matrix, leading to collagen deposition. Currently, the drug delivery system that targets HSCs in the treatment of liver fibrosis remains an urgent challenge due to the poor controllability of drug release. Since the level of reactive oxygen species (ROS) increases sharply in activated HSCs (aHSCs), we designed ROS-responsive micelles for the HSC-specific delivery of a traditional Chinese medicine, resveratrol (RES), for treatment of liver fibrosis. The micelles were prepared by the ROS-responsive amphiphilic block copolymer poly(l-methionine-block-Nε-trifluoro-acetyl-l-lysine) (PMK) and a PEG shell modified with a CRGD peptide insertion. The CRGD-targeted and ROS-responsive micelles (CRGD-PMK-MCs) could target aHSCs and control the release of RES under conditions of high intracellular ROS in aHSCs. The CRGD-PMK-MCs treatment specifically enhanced the targeted delivery of RES to aHSCs both in vitro and in vivo. In vitro experiments show that CRGD-PMK-MCs could significantly promote ROS consumption, reduce collagen accumulation, and avert activation of aHSCs. In vivo results demonstrate that CRGD-PMK-MCs could alleviate inflammatory infiltration, prevent fibrosis, and protect hepatocytes from damage in fibrotic mice. In conclusion, CRGD-PMK-MCs show great potential for targeted and ROS-responsive controlled drug release in the aHSCs of liver fibrosis.

Properties in Langmuir Monolayers and Langmuir-Blodgett Films of a Block Copolymer Based on N-Isopropylacrylamide and 2,2,3,3-Tetrafluropropyl Methacrylate

The amphiphilic block copolymer poly(N-isopropylacrylamide)-Ge(C6F5)2-poly(2,2,3,3-tetrafluoropropyl methacrylate) was prepared by the reaction of chain transfer to bis-(pentafluorophenyl)germane during the polymerization of N-isopropylacrylamide and the subsequent postpolymerization of isolated functional polymers in 2,2,3,3-tetrafluoropropyl methacrylate. The conversion of the block copolymer was 68% and the molecular weight of the sample was 490,000 g/mol. The colloidal chemical properties of Langmuir monolayers and Langmuir-Blodgett films of synthesized block copolymer have been studied. For comparison, a functional polymer, namely, poly-N-isopropylacrylamide with terminal -Ge(C6F5)2H group, was synthesized and studied. The concentrations of spreading solutions were selected and the effect of subphase acidity on the formation of monolayers of macromolecules of the block copolymer was studied. It was found that regardless of the acidity of the subphase, high pressure of fracture of films are characteristic of monolayers of collapse pressures πmax = (48-61) mN/m. The morphology of the Langmuir-Blodgett films of functional polymer exhibit isolated elongated micelles with high densities in the form of "octopus" on the periphery of which there are terminal hydrophobic groups. For the Langmuir-Blodgett film of block copolymer, a comb-like structure is observed with characteristic protrusions.

Multiple Pickering emulsions fabricated by a single block copolymer amphiphile in one-step

The mixture of emulsifiers with opposite amphiphilicity was often necessary in generating multiple emulsions, whereas multiple emulsions might be generated by a single-component copolymer amphiphile. In this work, the emulsification of amphiphilic block copolymers poly (lauryl methacrylate)-b-poly (N-(2-methacryloylxyethyl) pyrrolidone) (PLMAm-b-PNMPn) in the water/dodecane systems was systematically studied by the confocal laser scanning microscopy and dynamic light scattering techniques. Interestingly, multiple emulsions instead of single emulsions were generated by employing single-component block copolymer amphiphiles PLMAm-b-PNMPn as emulsifiers under certain conditions. In specifically, the formation of multiple emulsions was highly depended on the molar ratio (rPNMP/PLMA = n/m) between the PNMP and PLMA segments regardless of the molecular weight of block copolymers. Through introducing an aggregation-induced emission amphiphile poly (N-(2-methacryloyloxyethyl) pyrrolidone)-b-poly (lauryl methacrylate-co-1-ethenyl-4-(1,2,2-triphenylethenyl) benzene) (PNMP35-b-P(LMA42-co-TPE16) into emulsifiers, the interfacial characters of multiple emulsions were also clarified. The complex emulsification of PLMAm-b-PNMPn was explained by a concordant manner based on the in-situ formed emulsifier mixture composed of PLMAm-b-PNMPn molecules and micelles, which were confirmed by the quantitative fluorescent analysis. It was found out that the preferred continuous phase of emulsions was mainly determined by the hydrophilicity of PLMAm-b-PNMPn molecules. However, the agglomeration of hydrophobic aggregates on the interfacial layer might inverse the amphiphilicity of mixed emulsifiers, and thereby resulting in the formation of multiple emulsions.

Astrocytes in Paper Chips and Their Interaction with Hybrid Vesicles.

The role of astrocytes in brain function has received increased attention lately due to their critical role in brain development and function under physiological and pathophysiological conditions. However, the biological evaluation of soft material nanoparticles in astrocytes remains unexplored. Here, the interaction of crosslinked hybrid vesicles (HVs) and either C8-D1A astrocytes or primary astrocytes cultured in polystyrene tissue culture or floatable paper-based chips is investigated. The amphiphilic block copolymer poly(cholesteryl methacrylate)-block-poly(2-carboxyethyl acrylate) (P1) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine lipids are used for the assembly of HVs with crosslinked membranes. The assemblies show no short-term toxicity towards the C8-D1A astrocytes and the primary astrocytes, and both cell types internalize the HVs when cultured in 2D cell culture. Further, it is demonstrated that both the C8-D1A astrocytes and the primary astrocytes could mature in paper-based chips with preserved calcium signaling and glial fibrillary acidic protein expression. Last, it is confirmed that both types of astrocytes could internalize the HVs when cultured in paper-based chips. These findings lay out a fundamental understanding of the interaction between soft material nanoparticles and astrocytes, even when primary astrocytes are cultured in paper-based chips offering a 3D environment.

On the assembly of zwitterionic block copolymers with phospholipids

Materials containing zwitterionic polymers are interesting candidates for diverse applications due to their versatile properties. The assembly of the amphiphilic block copolymer poly(cholesteryl methacrylate)-block-poly(2-methacryloyloxyethyl phosphorylcholine) with three different phospholipids (1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE)) into small and giant vesicles is reported focusing on their morphology, size, and membrane properties. Giant hybrid vesicles were obtained for all types of lipids, but DOPC was more suitable to assemble small hybrid vesicles without a large fraction of hybrid micelles present. Further, the permeability of the small vesicle membranes towards 5(6)-carboxyfluorescein is very similar to comparable sized liposomes. In contrast, the permeability of the giant hybrid vesicle membranes towards 5(6)-carboxy-X-rhodamine is higher compared to only cholesterol-containing lipid giant vesicles. DOPS-containing vesicles showed pH-dependent morphology changes. Hybrid vesicles containing DOPS and DOPE in addition to the block copolymer have the highest association with HepG2 cells. In contrast, only DOPC-containing hybrid vesicles can be incorporated into alginate beads. Taken together, using these block copolymer with a zwitterionic hydrophilic extension of the chosen architecture offers fundamental insight into the possibility to assemble hybrid vesicles and their potential in bottom-up synthetic biology.

Studying the properties of polymer-lipid nanostructures: The role of the host lipid

The goal of the present investigation is to prepare polymer-grafted hybrid liposomes using phospholipids with different main transition temperature (Tm). In more detail, liposomes were prepared by the combination of three different lipids, having different transition temperatures, namely 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) with the amphiphilic block copolymer poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) (PDMAEMA-b-PLMA). The physicochemical characteristics of the prepared hybrid liposomes were evaluated by light scattering and their morphology by cryo-TEM. Their thermotropic behavior was characterized by mDSC and high-resolution ultrasound spectroscopy, while their microenvironmental parameters were attained by fluorescence spectroscopy. Subsequently, in vitro nanotoxicity studies have taken place. The studies indicate that PDMAEMA-b-PLMA was encapsulated in the liposomal membrane, leading size, and shape characteristics, as well as biosafety profile, strictly affected by the formulation's parameters, namely the lipid type and the polymer concentration. Thermal analysis confirmed the different interactions taking place between the polymer and the different lipids. The obtained results show that the aqueous heat method can be successfully used for lipid-polymer hybrid structures, containing lipids with a wide range of transition temperatures. These systems can also load curcumin, which was used as model active substance.

Twin-Engine Janus Supramolecular Nanomotors with Counterbalanced Motion.

Supramolecular nanomotors were created with two types of propelling forces that were able to counterbalance each other. The particles were based on bowl-shaped polymer vesicles, or stomatocytes, assembled from the amphiphilic block copolymer poly(ethylene glycol)-block-polystyrene. The first method of propulsion was installed by loading the nanocavity of the stomatocytes with the enzyme catalase, which enabled the decomposition of hydrogen peroxide into water and oxygen, leading to a chemically induced motion. The second method of propulsion was attained by applying a hemispherical gold coating on the stomatocytes, on the opposite side of the opening, making the particles susceptible to near-infrared laser light. By exposing these Janus-type twin engine nanomotors to both hydrogen peroxide (H2O2) and near-infrared light, two competing driving forces were synchronously generated, resulting in a counterbalanced, “seesaw effect” motion. By precisely manipulating the incident laser power and concentration of H2O2, the supramolecular nanomotors could be halted in a standby mode. Furthermore, the fact that these Janus stomatocytes were equipped with opposing motile forces also provided a proof of the direction of motion of the enzyme-activated stomatocytes. Finally, the modulation of the “seesaw effect”, by tuning the net outcome of the two coexisting driving forces, was used to attain switchable control of the motile behavior of the twin-engine nanomotors. Supramolecular nanomotors that can be steered by two orthogonal propulsion mechanisms hold considerable potential for being used in complex tasks, including active transportation and environmental remediation.

Aqueous Heat Method for the Preparation of Hybrid Lipid-Polymer Structures: From Preformulation Studies to Protein Delivery.

Liposomes with adjuvant properties are utilized to carry biomolecules, such as proteins, that are often sensitive to the stressful conditions of liposomal preparation processes. The aim of the present study is to use the aqueous heat method for the preparation of polymer-grafted hybrid liposomes without any additional technique for size reduction. Towards this scope, liposomes were prepared through the combination of two different lipids with adjuvant properties, namely dimethyldioctadecylammonium (DDA) and D-(+)-trehalose 6,6′-dibehenate (TDB) and the amphiphilic block copolymer poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) (PLMA-b-PDMAEMA). For comparison purposes, PAMAM dendrimer generation 4 (PAMAM G4) was also used. Preformulation studies were carried out by differential scanning calorimetry (DSC). The physicochemical characteristics of the prepared hybrid liposomes were evaluated by light scattering and their morphology was evaluated by cryo-TEM. Subsequently, in vitro nanotoxicity studies were performed. Protein-loading studies with bovine serum albumin were carried out to evaluate their encapsulation efficiency. According to the results, PDMAEMA-b-PLMA was successfully incorporated in the lipid bilayer, providing improved physicochemical and morphological characteristics and the ability to carry higher cargos of protein, compared to pure DDA:TDB liposomes, without affecting the biocompatibility profile. In conclusion, the aqueous heat method can be applied in polymer-grafted hybrid liposomes for protein delivery without further size-reduction processes.

A novel and modified fluorescent amphiphilic block copolymer simultaneously targeting to lysosomes and lipid droplets for cell imaging with large Stokes shift

Lipid droplets (LDs) and lysosomes are vital subcellular organelles which exist in almost all eukaryotic cells and play important roles in various physiological activities. In addition, recent studies showed that the interplay between LDs and lysosomes was related to metabolic diseases. Therefore, it is particularly meaningful for the medical field to develop an effective strategy to monitor lysosomes and LDs simultaneously aimed to understand the connection between them. However, single fluorescent tools for simultaneously visualizing LDs and lysosomes were rarely reported and they may be faced to poor water solubility or high cytotoxicity. Herein, we designed and synthesized a novel 1,8-naphthalimide-based fluorescent monomer which can target to lysosomes and LDs simultaneously. The fluorescent monomer was applied to copolymerize with a hydrophilic material PEGMA300 by reversible addition-fragmentation chain transfer polymerization (RAFT) for construction of fluorescent amphiphilic block copolymer Poly (Nap-Lyso-MMA-co-PEGMA300) for the first time, which exhibited good water solubility and photostability, large Stokes shift (almost 130 nm), good selectivity, low cytotoxicity, and wide pH stability. Furthermore, it was sensitive to the solvent polarity and lipo-solubility. We successfully achieved a series of bio-imaging applications such as cell imaging, lysosome-LDs dual-locating imaging. These results indicated that the fluorescent copolymer possessed the remarkable bio-membrane penetration, lysosomes-targeting with the Pearson’s Correlation of 0.832443, LDs-specificity with the Pearson’s Correlation of 0.938595. Interestingly, fluorescent polymer could locate in dual-organelles simultaneously with different fluorescence signal, which could distinguish by the dot-fluorescence in LDs and the sheet-fluorescence in Lysosomes, accompanied by the brighter fluorescence in LDs than in Lysosomes. Based on these good properties as mentioned above, we expect the synthetic fluorescent polyacrylate could serve as a promised candidate to understand the interplay between lysosomes and LDs for promoting progress in biomedical fields.

Nitric oxide producing artificial enzymes based on metalloporphyrins

Artificial enzymes are synthetic materials or molecules that exhibit enzyme-like activities. Herein, we report artificial enzymes based on metalloporphyrins (MPs) that can mimic nitric oxide synthase (NOS) to produce nitric oxide (NO) from l-arginine (Arg) using hydrogen peroxide (H2O2) as an oxidant, and we determine the microenvironmental influence on their activity and stability. An assortment of structurally diverse water-soluble MPs was synthesized, and their NO production was compared. Improved catalytic activity and stability of the lead MP were observed when it was conjugated to the hydrophilic homopolymer poly(2-carboxyethyl acrylate) (PCEA). Micelles assembled from the amphiphilic block copolymer poly(cholesteryl methacrylate)-block-PCEA functionalized with the lead MP, and MP-conjugated PCEA polymer chains immobilized on silica particles resulted in moieties with ∼3× higher catalytic activity compared to the monomeric MP. Finally, the PCEA-coated silica particles could use the MPs as motor units to exhibit enhanced diffusion in the presence of the required fuel molecules Arg and H2O2. Taken together, the microenvironments of the artificial enzymes have a marked impact on their activity and stability, and these NO-producing MPs offer an interesting synthetic alternative to their natural counterparts.

Polymer Micelles vs Polymer-Lipid Hybrid Vesicles: A Comparison Using RAW 264.7 Cells.

Bottom-up synthetic biology aims to integrate artificial moieties with living cells and tissues. Here, two types of structural scaffolds for artificial organelles were compared in terms of their ability to interact with macrophage-like murine RAW 264.7 cells. The amphiphilic block copolymer poly(cholesteryl methacrylate)-block-poly(2-carboxyethyl acrylate) was used to assemble micelles and polymer–lipid hybrid vesicles together with 1,2-dioleoyl-sn-glycero-3-phosphocholine or 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) lipids in the latter case. In addition, the pH-sensitive fusogenic peptide GALA was conjugated to the carriers to improve their lysosomal escape ability. All assemblies had low short-term toxicity toward macrophage-like murine RAW 264.7 cells, and the cells internalized both the micelles and hybrid vesicles within 24 h. Assemblies containing DOPE lipids or GALA in their building blocks could escape the lysosomes. However, the intracellular retention of the building blocks was only a few hours in all the cases. Taken together, the provided comparison between two types of potential scaffolds for artificial organelles lays out the fundamental understanding required to advance soft material-based assemblies as intracellular nanoreactors.