Effect Of Ambient Temperature Research Articles

Analysis of Altitude and Ambient Temperature Effects on the Reactivity of Oxidation Catalysts in the Presence of H2

Worldwide emission standards are now required to cover engine operation under extreme ambient conditions, which affect the raw emissions and the efficiency of the exhaust aftertreatment systems. These regulations also target new combustion technologies for decarbonization, such as neat hydrogen (H2) combustion or dual-fuel strategies, which involve a challenge to the analysis of exhaust aftertreatment system requirements and performance. This work addresses the impact of high altitude and low ambient temperature conditions on the reactivity of an oxidation catalyst in the presence of H2. A reaction mechanism is proposed to cover the main conversion paths of CO, HC, and H2, including the formation and consumption of high-energy surface reaction intermediates. The mechanism has been implemented into a faster-than-real-time reduced-order model for multi-layer washcoat honeycomb catalytic converters. The model was utilized to investigate the effect of H2 concentration on the reactivity of CO and HC within the catalyst under various operating and ambient conditions. By applying the model and examining the selectivity towards different reaction pathways in the presence of H2, insights into surface intermediates and reactivity across different cross-sections of the monolith were obtained. This analysis discusses the underlying causes of reactivity changes promoted by H2 and its relative importance as a function of driving boundary conditions.

Effects of ambient temperature and humidity on COPD mortality in Ganzhou city, China.

This study used the time series data of Ganzhou city to explore the individual and interaction effects of temperature and humidity on COPD death, and identify vulnerable subgroups of the population. We collected daily COPD mortality and meteorological data in Ganzhou from 2016 to 2019. The nonlinear distribution lag model was used to examine the associations and interaction between daily mean temperature and humidity and COPD mortality. For the total population, male and 65 years old or above, the relative risk (RR) for COPD mortality could be significant at extremely low temperature (3.3 ℃), reaching 1.799 (95% confidence interval [CI]: 1.216, 2.662), 1.894 (95% CI: 1.164, 3.084) and 1.779 (95% CI:1.185, 2.670). Also, at extremely low humidity (47.8%), the risk reached 1.888 (95% CI: 1.217, 2.930), 1.837 (95% CI: 1.066, 3.165) and 2.166 (95% CI: 1.375, 3.414). The cumulative COPD death risk for females was 3.524 (95% CI: 1.340, 9.267) at high temperature (30.7 ℃), 1.953(95% CI: 1.036, 3.683) at low humidity (47.8%) and 1.726 (95% CI: 1.048, 2.845) at high humidity (96.7%). For the total COPD deaths and subgroups, the interaction effects between daily temperature and humidity were not significant (p > 0.05). Both extremely low temperature and low humidity increased the risk of COPD death in Ganzhou city, especially for males and people over 65 years old. Females were more sensitive to extremely high temperature and humidity. Patients with COPD should pay attention to self-protection under extreme temperature and humidity weather conditions.

Effect of temperature on GaN-integrated optical transceiver chips.

The gallium nitride (GaN) integrated optical transceiver chip based on multiple quantum wells (MQW) structure exhibits great promise in the fields of communication and sensing. In this Letter, the effect of ambient temperature on the performance of GaN-integrated optical transceiver chips including a blue MQW light-emitting diode (LED) and a MQW photodiode (PD) is comprehensively studied. Temperature-dependent light-emitting and current-voltage characteristics of the blue MQW LEDs are measured with the ambient temperature ranging from -70°C to 120°C. The experimental results reveal a decline in the electroluminescent (EL) intensity and an obvious redshift in the emission peak wavelength of the LED with increasing ambient temperature. The light detection performance of MQW PD under different temperatures is also measured with the illumination of an external blue MQW LED, indicating an enhancement in the PD sensitivity as the temperature rises. Finally, the temperature effect on the MQW PD under the illumination of the MQW LED on the GaN-integrated optical transceiver chip is characterized, and the PD photocurrent increases with higher ambient temperature. Furthermore, the measured temperature characteristics indicate that the GaN-integrated optical transceiver chip offers a promising application potential for optoelectronic temperature sensor.

Combined effects of ambient temperature and food availability on induced innate immune response of a fruit-eating bat (Carollia perspicillata).

Resilience of mammals to anthropogenic climate and land-use changes is associated with the maintenance of adequate responses of several fitness-related traits such as those related to immune functions. Isolated and combined effects of decreased food availability and increased ambient temperature can lead to immunosuppression and greater susceptibility to disease. Our study tested the general hypothesis that decreased food availability, increased ambient temperature and the combined effect of both factors would affect selected physiological and behavioral components associated with the innate immune system of fruit-eating bats (Carollia perspicillata). Physiological (fever, leukocytosis and neutrophil/lymphocyte ratio) and behavioral (food intake) components of the acute phase response, as well as bacterial killing ability of the plasma were assessed after immune challenge with lipopolysaccharide (LPS: 10 mg/kg) in experimental groups kept at different short-term conditions of food availability (ad libitum diet or 50% food-deprived) and ambient temperature (27 and 33°C). Our results indicate that magnitude of increase in body temperature was not affected by food availability, ambient temperature or the interaction of both factors, but the time to reach the highest increase took longer in LPS-injected bats that were kept under food restriction. The magnitude of increased neutrophil/lymphocyte ratio was affected by the interaction between food availability and ambient temperature, but food intake, total white blood cell count and bacterial killing ability were not affected by any factor or interaction. Overall, our results suggest that bacterial killing ability and most components of acute phase response examined are not affected by short-term changes in food availability and ambient temperature within the range evaluated in this study, and that the increase of the neutrophil/lymphocyte ratio when bats are exposed to low food availability and high ambient temperature might represent an enhancement of cellular response to deal with infection.

Lag effect of ambient temperature on respiratory emergency department visits in Beijing: a time series and pooled analysis

BackgroundAlthough the association between ambient temperature and mortality of respiratory diseases was numerously documented, the association between various ambient temperature levels and respiratory emergency department (ED) visits has not been well studied. A recent investigation of the association between respiratory ED visits and various levels of ambient temperature was conducted in Beijing, China.MethodsDaily meteorological data, air pollution data, and respiratory ED visits data from 2017 to 2018 were collected in Beijing. The relationship between ambient temperature and respiratory ED visits was explored using a distributed lagged nonlinear model (DLNM). Then we performed subgroup analysis based on age and gender. Finally, meta-analysis was utilized to aggregate the total influence of ambient temperature on respiratory ED visits across China.ResultsThe single-day lag risk for extreme cold peaked at a relative risk (RR) of 1.048 [95% confidence interval (CI): 1.009, 1.088] at a lag of 21 days, with a long lag effect. As for the single-day lag risk for extreme hot, a short lag effect was shown at a lag of 7 days with an RR of 1.076 (95% CI: 1.038, 1.114). The cumulative lagged effects of both hot and cold effects peaked at lag 0–21 days, with a cumulative risk of the onset of 3.690 (95% CI: 2.133, 6.382) and 1.641 (95% CI: 1.284, 2.098), respectively, with stronger impact on the hot. Additionally, the elderly were more sensitive to ambient temperature. The males were more susceptible to hot weather than the females. A longer cold temperature lag effect was found in females. Compared with the meta-analysis, a pooled effect of ambient temperature was consistent in general. In the subgroup analysis, a significant difference was found by gender.ConclusionsTemperature level, age-specific, and gender-specific effects between ambient temperature and the number of ED visits provide information on early warning measures for the prevention and control of respiratory diseases.

Detrimental effects of scene manipulations on temperature-based time since death estimation

In forensic casework, time since death (TSD) estimations may play a crucial role to establish chains of events as well as for alibi assessment in homicide cases. Classical TSD estimation relies on reasonably stable ambient temperatures and a correct documentation of ambient and rectal temperatures. This constancy is in some cases disturbed by post-discovery alterations of the crime scene, e.g. opening a window. In order to develop a better understanding of this alteration-based detrimental impact on TSD estimation as well as to identify feasible recommendations for casework, the present pilot study examined ambient temperature effects of different window opening scenarios regarding various time intervals (5 to 360 min) in a furnished 10 m2 apartment during winter. In this context, in addition to the ambient temperature and thus the cooling rate of the room, re-approximation to initial room temperature, potential influences on a nomogram-based time since death estimation using a fictitious case, and the impact of the measurement height above the ground were investigated. Our data indicate a significant reduction of the mean temperature decrease rate after 15 min regardless of the remaining opening time and a correlation with the size of the respective opening surfaces. Re-approximation to initial room temperatures was observed with up to three times longer than the initial opening time. There was no evidence of a substantial advantage of temperature measurements above the level of the corpse (> 0.1 m). The limitations of the study and its applicability for forensic casework are critically reviewed.

Evaluation of a concentrated solar power-driven system designed for combined production of cooling and hydrogen

The current technique of hydrogen generation and cooling production raises climatic problems, which calls for the investigation of cleaner alternatives. No research has been conducted to propose and analyze a solar thermal power cycle-based water electrolysis for on-site production of hydrogen and the detailed exergy analysis of a series flow double-effect absorption chilling machine employed for large solar cooling. In this regard, a helically coiled tube embedded central receiver is used in the heliostat field for the simultaneous production of solar cooling and green hydrogen to meet the increasing needs of energy and fuel sustainably. The combined system is composed of four sub-systems including a heliostat field, LiBr–H2O operated series-flow double effect absorption refrigeration cycle (DEARC), organic Rankine cycle (ORC), and proton exchange membrane (PEM) electrolyzer. The system was examined from energy and exergy perspectives in the Engineering Equation Solver (EES) using library data of REFPROP for obtaining the thermodynamic properties of working fluids. The results of the thermodynamic model for the combined system are validated. Furthermore, the effect of ambient temperature, solar irradiation, and type of ORC working fluid on the hydrogen and cooling production, and the overall energy and exergy efficiency of the combined system are examined. A computational fluid dynamics simulation applying ANSYS-FLUENT was used to examine how coil curvature ratio and coil torsion affect solar heat transfer fluid (SHTF) pressure and temperature leaving the receiver. The coil curvature ratio affects temperature increase more than coil torsion. Solar heat transfer fluid outlet temperature increases by 36.9 % when the coil curvature ratio increases from 0.063 to 0.095 at direct normal irradiations (DNI) 1200 W/m2, input temperature of 92°C, and coil torsion of 0.032. The response of the cogeneration cycle to varying operating parameters is examined. Application of R141b as the ORC fluid results in a large increase of cooling exergy efficiency from 14.98 % to 63.48 % when the ambient temperature is increased from 15 °C to 45 °C whereas the exergy efficiency of the combined system is marginally improved. The exergy distribution presents for ORC operating on R141b, out of 100 % input solar exergy, 16.42 % is generated as hydrogen exergy and 13.67 % cooling exergy, 66.79 % is the exergy destroyed, and the rest 3.12 % is exergy loss. Exergy analysis is utilized to identify the sources of losses in useful energy within the components of the system considered and provides a more realistic and meaningful assessment than the traditional energy analysis. The results justify a need for the promotion of exergy analysis through policy decisions in the context of the global energy and environment crisis.

Effect of ambient temperature on the adsorption performance of automotive activated carbon: An experimental and molecular simulation study

The ambient temperature is a non-negligible factor when evaluating the adsorption performance of automobile activated carbon. In this study, dynamic tests of butane adsorption on activated carbon were carried out at ambient temperatures of 293 K, 313 K, and 333 K. In addition, molecular simulation method was used to analyze the influence mechanism of temperature on the adsorption performance of activated carbon. The results show that the working capacity of automotive activated carbon decreases by 15.9% to 20.2% and the butane breakthrough time is shortened by 21.4% to 37.5%, as the ambient temperature is increased from 293 K to 333 K. In the high temperature environment, the thermal movement of the gas molecules is more intense so that the kinetic energy and diffusion coefficient of the butane molecules are increased. When activated carbon adsorbs multilayer butane molecules, the temperature increase mainly reduces the adsorption sites after the first adsorption layer (around 5.5 Å).

Evaluating the effect of ambient air temperature on the sustainability aspect of naphtha‐based gas turbine power plant

AbstractThe exergy‐based sustainability indices have been a cause of concern for gas turbine power plant as its performance is very sensitive to air temperature. Hence, the present study evaluates the impact of atmospheric air temperature on exergy sustainability and ecological function of a naphtha‐based gas turbine power plant using EES. The outcome of the study shows that combustion chamber (CC_1) needs more attention compared with other components present, and it has least improvement potential as compared with other components. Further while carrying out parametric analysis with respect to ambient air, it was observed that for a 1.1°C increase in atmospheric air temperature a reduction in sustainability index about 0.66% was observed respectively, for GT_1. Thus, this study established that the power plant's exergy sustainability performance has a negative impact at high ambient air temperatures on exergy sustainability indices.

Energy-conserving cold chain with ambient temperature, path flexibility, and hybrid fleet: formulation and heuristic approach

Cold chain logistics networks represent intricate systems that require harmonisation of their influence on the economy, environment, and society. However, simultaneously achieving these goals is hard. This paper defined a comprehensive model aiming to achieve a tradeoff of these goals related to cost efficiency, product quality, delivery timeliness, and environmental impacts. Meanwhile, the influences of ambient temperature, path flexibility, and hybrid fleet on the proposed dual-mode location-routing problem-based cold chain logistics (DMLRPCCL) are analyzed. A meticulously crafted hyper-heuristic framework employing Q-learning has been developed to address the complexity of cold chains to obtain high-quality solutions. The numerical study has shown that the proposed model can analyze various scenarios for perishable products and evaluate their impact on cost, emissions, and quality. The proposed algorithm is efficient and effective in achieving competitive results compared to three tailored algorithms. Extensive analyses are performed to empirically assess the effect of path flexibility, hybrid fleet, and ambient temperature on the DMLRPCCL planning. Several managerial insights are presented.

Prediction of the effect of load resistance and heat input on the performance of thermoelectric generator using numerical and artificial neural network models

The load resistance in the thermoelectric generators (TEGs) is crucial for optimizing power output, and managing load resistances and operating conditions are integral elements of TEG system design. In this context, it is very important to predict the performance of TEGs at variable operating conditions. This research addresses an important problem in TEG by predicting the effects of load resistance and heat input on performance using both numerical and ANN models. The three-dimensional finite volume methods applied by employing ANSYS software, and the results were compared with experimental and ANN results in terms of voltage, current, power output and efficiency. In case of ambient temperature values of 17 °C, the average absolute errors of ANN and numerical model were calculated as 2.09 % and 4.22 % for voltage output, 0.79 % and 7.73 % for current output, 5.35 % and 12.09 % for power output, 4.14 % and 12.09 % for efficiency, respectively. As a result, it was observed that the ANN model gives better results compared to the numerical model. The highest power output was obtained at load resistance of 5.4 Ω and hot surface temperature of 150 °C, with the value of 0.827 W experimentally, 0.905 W numerically, and 0.824 W with ANN models. Besides, to evaluate the effect of ambient temperature, two additional temperatures (10 °C and 25 °C) were tested and it was found that decreasing the ambient temperature increased the TEG performance. The results showed that significant improvements on power and efficiency performance of the TEG can be achieved with optimised operating conditions.

Relationship between Ambient Temperature and Reasonable Heat Dissipation Coefficient of Mass Concrete Pouring Blocks.

In engineering practice, similar surface insulation measures are typically applied to different parts of mass concrete surfaces. However, this can lead to cracking at the edges of the concrete surface or the wastage of insulation materials. In comparison to flat surfaces, the edges of mass concrete structures dissipate heat more rapidly, leading to more pronounced stress concentration phenomena. Therefore, reinforced insulation measures are necessary. To reduce energy consumption and enhance overall insulation effectiveness, it is essential to study the specific insulation requirements of both the flat surfaces and edges of concrete separately and implement targeted surface insulation measures. Taking the bridge abutment planned for pouring in Nanjing City as the research object, this study established a finite element model to explore the effects of different ambient temperatures and different surface heat dissipation coefficients on the early-age temperature and stress fields of different parts of the abutment's surface. Based on simulation results, reasonable heat dissipation coefficients that meet the requirements for crack prevention on both the structure's plane and edges under different ambient temperatures were obtained. The results indicate that under the same conditions, the reasonable heat dissipation coefficient at the edges was smaller than that on the flat surfaces, indicating the need for stronger insulation measures at the edges. Finally, mathematical models correlating ambient temperature with reasonable heat dissipation coefficients for the structure's plane and edges at these temperatures were established, with high data correlation and determination coefficients (R2) of 0.95 and 0.92. The mathematical models were validated, and the results from finite element calculations were found to be consistent with those from the mathematical models, validating the accuracy of the mathematical models. The conclusions drawn can provide references for the insulation of similar engineering concrete planes and edges.

Microbial transformation mechanisms of particulate organic carbon to mineral-associated organic carbon at the chemical molecular level: Highlighting the effects of ambient temperature and soil moisture

Soil dissolved organic matter (DOM), an important component of active soil organic carbon (C), plays a crucial role in controlling C transformation. However, the role of DOM in mediating the conversion of particulate organic C (POC) into mineral-associated organic C (MAOC) at the molecular level remains unclear. In this study, the microbial conversion of POC to MAOC at the molecular level was investigated at different ambient temperatures and soil moisture levels. An increase in ambient temperature led to the conversion of POC to labile C, whereas MAOC increased with soil moisture. CHO, CHNO, and CHOS increased with soil moisture and temperature. The highest temperature (35 °C) promoted conversion of lignin/cram (carboxyl-rich alicyclic molecules)-like molecules into aromatic components with the highest intragroup transformation of DOM (74%). The highest soil moisture (60%) favoured the conversion of refractory substances into aliphatic/peptide and lipid components with the highest intergroup transformation (28%). Compared to fungi, bacteria were the main driving force for DOM transformation. Therefore, changes in ambient temperature and soil moisture control the microbial formation and transformation of different C fractions (i.e. POC and MAOC) via DOM differently at the molecular level.

Analysis of night behavior and negative running for PVT system

High absorption of PV benefits heat collection in the daytime, but the heat loss to the space/environment because of its high emissivity also should be noticed. Although there are many papers investigating PVT, few of them cover the night behavior and negative running during late afternoon. This paper supplements detailed studies on related content to draw people's attention to the night and late-afternoon operation that helps better strategy establishment and less heat loss. From experiments, the clouds help hinder the PV radiant heat exchange with space. Under clear night, the PV bottom temperature can be 6.88 °C lower than air temperature and the water tank's bottom temperature drops 2.8 °C. Because of the fluid viscosity, no apparent temperature stratification and flow occur in the PVT water pipe, causing even PV temperature. The higher the water temperature, the easier the negative running occurs during late afternoon, although the irradiation is still high at 521W/m2. Heat loss power and energy are −199W and 1791 KJ from 15:10 to 17:40. Based on different regressed linear correlations of different PVT systems, the effect of water temperature, irradiation, and ambient temperature on the negative performance is also comparatively studied.

Effect of Temperatures on Flame Propagation of Diethyl Ether Spray Explosion

ABSTRACT The study aims to identify the flame propagation in the diethyl ether (DEE) spray explosion through mathematical analysis by processing the gray-level histogram of the flame images. Different ambient and material temperatures’ effect on flame propagation and structure was investigated using a high-speed camera in a 20-L explosion vessel. The results showed that the overall duration could be divided into combustion and deflagration processes. With the ambient temperature increased, the combustion duration showed a trend of first decreasing, then increasing, and then decreasing again. The combustion zone first increased and then decreased. The explosion duration showed an overall decreasing trend. The explosion duration was longer than the combustion duration, ranging from 152.75 to 307 ms. The overall combustion and explosion duration trend was consistent with the explosion duration. When the ambient temperature was 308.15 K, the combustion duration reached its minimum value of 13.25 ms, and the equivalent radius of the combustion zone reached its maximum value of 52.89 mm. With the increase in material temperature, both the combustion and explosion durations showed a trend of first decreasing and then increasing, with combustion durations ranging from 12.42 to 16.25 ms and explosion durations ranging from 106 to 117.5 ms, respectively. When the material temperature was 308.15 K, the combustion zone expansion rate reached its maximum value of 10.20 m/s, and the explosion zone expansion rate reached its maximum value of 13.36 m/s. The effect of ambient temperature on the development of combustion zone is greater than that of material temperature, which is mainly reflected in the obvious change of equivalent radius.

Effects of climatic conditions of Al Seeb in Oman on the performance of solar photovoltaic panels

Human activities and climatic elements, including temperature, humidity, and wind speed, have an impact on natural dust deposition. Therefore, this study aims to investigate the effects of wind speed, relative humidity, and ambient temperature on the performance of soiled photovoltaic panels in Al Seeb, Oman. The study was conducted by exposing the solar PV panels to outdoor sunlight for a duration of two months. Parameters such as solar radiation, voltage, current, solar panel temperature, wind speed, relative humidity, and ambient temperature were collected in a short time interval. It was observed that the dust densities of 20.7 g/m2, 27 g/m2, and 41.3 g/m2 resulted in electrical power reductions of 18 %, 33 %, and 40 % for the panels uncleaned for one week, two weeks, and three weeks, respectively. The effect of daily dust resulted in an energy reduction of 14 %. Moreover, dust deposition decreases when the wind speed increases, resulting in a higher power output and vice versa. The higher the humidity, the stronger the dust's adhesion to the surface, resulting in more deposition and reduced power output. The maximum power output of 82.3 W was achieved at the wind speed of 10 m/s, 34.9 % relative humidity, and ambient temperature of 38.5 °C.

Annual performance evaluation of a hybrid concentrated solar–micro gas turbine based on off-design simulation

As the adoption of solar hybrid systems continues to rise due to their potential to compensate for the fluctuation of solar irradiation, it becomes imperative to accurately evaluate their performance, considering the variation of off-design conditions. This paper introduces a detailed analysis method for evaluating the annual performance of a solar-MGT system under transient boundary conditions for a whole-year operation range. A hybrid system of a micro gas turbine, recuperator, and solar dish is considered, and an off-design simulation model is developed and verified with available experimental results. Two different configurations for a recuperated cycle are considered, and simulations are conducted for a test case in Pretoria, SA. The results for Jun.21 and Dec.21 as low and high solar energy days are reported with more details to compare the configurations and demonstrate the effect of ambient temperature on the heat loss of the solar receiver and the overall performance of the system. The alternative configuration reduces heat loss with a lower temperature receiver but has higher fuel consumption compared to the conventional configuration. Operating strategies for different hours of operation from 1 h to 24 h per day are simulated for 365 days, based on real meteorological data, and compared with the operating in solar available hours. It is shown that the whole-year simulation of the system considering the variation of boundary conditions can change the estimation of fuel consumption by 25 %.

Effects of ambient temperature and compaction delay time on the performance of cement-stabilised sand–gravel and the determination of allowable construction delay time

ABSTRACT Compaction delay time (t d) refers to the period from the mixing of inorganic binder–stabilised materials to the completion of compaction; this process is affected by ambient temperature (T a). To characterise the effects of T a and t d on the performance of cement-stabilised sand–gravel (CSG) during construction, the reliability of the vertical vibration compaction method (VVCM) is evaluated and the effects of T a and t d on the mechanical strength and freeze–thaw resistance of CSG are investigated. Next, a predictive model for the allowable construction delay time is developed based on a non-loss principle with respect to pavement performance. The results show that the correlation between the mechanical strength of CSG laboratory specimens subjected to VVCM and field core samples can reach ∼90%. Higher T a and longer t d significantly reduce the mechanical strength and freeze-thaw resistance of CSG. Notably, when t d exceeds the initial setting time of cement, the average reductions in compressive strength, splitting strength, and freeze-thaw resistance of CSG are ∼29.3%, 31.3%, and 20.4%, respectively. The allowable construction delay time decreases linearly with increasing T a, showing a correlation of up to 99%. The predictive model can effectively determine the allowable construction delay time at any temperature.

Timing of egg-laying in relation to a female’s social environment in European starlings

Abstract It is widely assumed that female birds use nonphotic supplemental cues, including social factors, to fine-tune timing of egg-laying to local conditions, but our knowledge of the nature of these social cues and how they operate remains limited. We analyzed the relationship between a female’s social environment (nearest neighbor distances, residency, female -and- network familiarity, synchrony) and variation in timing of egg-laying in European starlings (Sturnus vulgaris) using individual, residual laying date (controlling for annual variation) and temperature-independent residual laying date (accounting for the effect of ambient temperature on laying date). Female social environment varied systematically with overall spatial distribution of nest-boxes (linear vs clumped boxes) but this was not associated with spatial variation in laying date or temperature-independent residual laying date. We found no evidence for any relationships between individual variation in social environment and individual, residual laying date and only weak evidence for any association with individual, temperature-independent residual laying date. The latter was associated with (1) nearest neighbor distances in the linear habitat, with females nesting closer to neighbors laying earlier than predicted by temperature, but not in the two clumped habitats, and (2) neighbor familiarity: females with an intermediate number of returning females (3/8) laid closest to the predicted date. Finally, despite the fact that synchrony was not associated with other social environment metrics, females with lower laying synchrony among neighbors laid earlier than predicted by temperature. This suggests that some components of the female-female social environment could act as supplemental cues for timing of egg-laying.

Effect of increasing ambient temperature on physiological changes, oxidative stress, nitric oxide, total antioxidant power, and mitochondrial activity of Nile tilapia (Oreochromis niloticus Linn.)

The objective of this study was to investigate the effect of high ambient temperature on physiological changes of live Nile tilapia (Oreochromis niloticus Linn.) and biochemical parameters in Nile tilapia blood cells. Live Nile tilapia and Nile tilapia blood cells were maintained at temperature ranges from 24 to 34 °C and 24–38 °C, respectively. Then, physiological parameters (body temperature, body color score, pulse rate, ventilation rate, oxygen saturation) of the live Nile tilapia and biochemical parameters (total antioxidant power, hydrogen peroxide, malondialdehyde, nitric oxide, and mitochondrial activity) of the Nile tilapia blood cells were measured for every 2 °C increase. It was found that when the ambient temperature increases, body temperature of live Nile tilapia continually increased. Total antioxidant power and hydrogen peroxide, pulse rate, body color score, malondialdehyde, ventilation rate and mitochondrial activity commenced to increase at 26, 28, 30, 32, 34 °C (P < 0.05), respectively. Blood oxygen saturation decreased at 32 °C (P < 0.05). The response of nitric oxide of Nile tilapia blood cells responded to increased temperature in two phases. In the first phase, nitric oxide decreased at 28–32 °C (P < 0.05), then increased and decreased again at a temperature of 38 °C (P < 0.05). These phenomena indicated that when the live Nile tilapias and the Nile tilapia blood cells were exposed to high ambient temperature, they were under heat stress and oxidative stress. In addition, physiological responses in the live Nile tilapia and biochemical changes in their blood cells when exposed to high ambient temperature occurred in a consistent manner when the temperature continually increased.