Alkynoic Acids Research Articles

Combining Trifunctionalization of Alkynoic Acids, Arene ortho C-H Functionalization and Amination: An Approach to Unsymmetrical 2,3-Diaryl Substituted Indoles.

Here we report a simultaneous construction of two C-C and two C-N bonds in a unified procedure that incorporates alkynoic acid trifunctionalization, ortho C-H functionalization, and amination cascade. In an ordered process, the regioselective alkyne insertion reaction is favored over the decarboxylation process. The presence of the carboxyl group in alkynoic acid ensures the high regioselectivity in the carbopalladation process, paving the way for a novel method to synthesize unsymmetrically 2,3-diaryl substituted indole scaffolds with excellent regioselectivity. The protocol is demonstrated to be suitable for gram-scale synthesis.

Gold Catalyzed 7-endo-dig Hydroaminations Yielding 1,4-Diazepineones.

Strategies to access the 1,4-diazepindiones heterocyclic core of the TAN-1057 family of natural products revealed a successful gold-catalyzed hydroamination of yneamide tethered amines. The precursor amino-yneamides are derived from easily accessible 1,2-diamines and alkynoic acids and are efficiently cyclized to the corresponding diazepineones.

Tuning the Catalytic Activity of a Pincer Complex of Rhodium(I) by Supramolecular and Redox Stimuli.

We report the rhodium(I) complex [Rh(CNC-NDI)(CO)]+ , in which CNC-NDI refers to a pincer-CNC ligand decorated with a naphthalenediimide moiety. Due to the presence of the planar CNC ligand and the naphthalenediimide moiety, the electronic nature of the complex can be modulated by means of supramolecular and redox stimuli, respectively. The metal complex shows a strong π-π-stacking interaction with coronene. This interaction has an impact on the electron-richness of the metal, as demonstrated by the shifting of the ν(CO) stretching band to a lower frequency. The addition of tetrabutylammonium fluoride facilitates the sequential one- and two-electron reduction of the NDI moiety of the ligand, thus resulting in a situation in which the ligand can increase its electron-donor strength in two levels. The nature of the interaction with the fluoride anion was studied computationally. The catalytic activity of the [Rh(CNC-NDI)(CO)]+ complex was tested in the cycloisomerization of alkynoic acids, where it is observed that the activity of the catalyst can be modulated between four levels of activity, which correspond to i) the use of the unmodified catalyst, ii) catalyst+coronene, iii) catalyst+2 equivalents of fluoride, and iv) catalyst+5 equivalents of fluoride.

Tuning the Catalytic Activity of a Pincer Complex of Rhodium(I) by Supramolecular and Redox Stimuli

AbstractWe report the rhodium(I) complex [Rh(CNC−NDI)(CO)]+, in which CNC−NDI refers to a pincer‐CNC ligand decorated with a naphthalenediimide moiety. Due to the presence of the planar CNC ligand and the naphthalenediimide moiety, the electronic nature of the complex can be modulated by means of supramolecular and redox stimuli, respectively. The metal complex shows a strong π–π‐stacking interaction with coronene. This interaction has an impact on the electron‐richness of the metal, as demonstrated by the shifting of the ν(CO) stretching band to a lower frequency. The addition of tetrabutylammonium fluoride facilitates the sequential one‐ and two‐electron reduction of the NDI moiety of the ligand, thus resulting in a situation in which the ligand can increase its electron‐donor strength in two levels. The nature of the interaction with the fluoride anion was studied computationally. The catalytic activity of the [Rh(CNC−NDI)(CO)]+ complex was tested in the cycloisomerization of alkynoic acids, where it is observed that the activity of the catalyst can be modulated between four levels of activity, which correspond to i) the use of the unmodified catalyst, ii) catalyst+coronene, iii) catalyst+2 equivalents of fluoride, and iv) catalyst+5 equivalents of fluoride.

Efficient synthesis and mechanistic insights for the formation of imidazo[1,2-a]pyridines via multicomponent decarboxylative coupling using chitosan-supported copper catalysts

An efficient multicomponent decarboxylative coupling of 2-aminopyridines, aldehydes and alkynoic acids for the synthesis of imidazo[1,2-a]pyridines was developed using recyclable chitosan-supported copper (chit@CuSO4) as a heterogeneous catalyst. Computational and experimental evidence revealed that in situ generated propargylamine undergoes cyclization to the desired imidazopyridine via prototropic isomerization involving allene type intermediates. Control experiments on isolated propargylamine demonstrated that cyclization could proceed without any metal catalyst. In literature, the cyclization step is assumed to be facilitated by metal catalyst and experimental proof for the involvement of actual intermediates is not available. The synthesized imidazopyridines were further evaluated for antiproliferative activity against human neuroblastoma cells (SHSY-5Y) using MTT assay.

Palladium(II)-Catalyzed Decarboxylative Difunctionalization of Alkynoic Acids To Access (E)-β-Sulfonylacrylamides and DFT Study.

A palladium(II)-catalyzed regio- and stereoselective difunctionalization of alkynoic acids has been achieved using sodium sulfinates and isocyanides to synthesize (E)-β-sulfonylacrylamides. The reaction proceeds via decarboxylative isocyanide addition, followed by sulfonylation. This three-component process works well with aromatic, heteroaromatic, and aliphatic alkynoic acids with good functional group tolerance and excellent regio- and stereoselectivity. DFT calculations were carried out to explain the reaction mechanism and the stereoselective formation of (E)-β-sulfonylacrylamides.

Cellulose-Supported Heterogeneous Gold-Catalyzed Cycloisomerization Reactions of Alkynoic Acids and Allenynamides.

Herein, we describe efficient nanogold-catalyzed cycloisomerization reactions of alkynoic acids and allenynamides to enol lactones and dihydropyrroles, respectively (the latter via an Alder-ene reaction). The gold nanoparticles were immobilized on thiol-functionalized microcrystalline cellulose and characterized by electron microscopy (HAADF-STEM) and by XPS. The thiol-stabilized gold nanoparticles (Au0) were obtained in the size range 1.5-6 nm at the cellulose surface. The robust and sustainable cellulose-supported gold nanocatalyst can be recycled for multiple cycles without losing activity.

Alkynyl Acylazolium: A Versatile 1,3-Bielectrophilic 3C-Synthon in NHC-Organocatalysis.

N-Heterocyclic carbene (NHC) organocatalysis has emerged as a powerful tool in the field of modern organic synthesis especially in the asymmetric construction of various cyclic skeletons. As an emerging NHC-bound 1,3-bielectrophilic intermediate, alkynyl acylazolium has drawn substantial attention in recent years, and has been used as a versatile 3C-synthon in synthesizing valuable organic molecules since its discovery. In this review, focused on the different pathways for the formation of alkynyl acylazoliums from different precursors like alkynoic esters, alkynoic acids and ynals, the recent advances in the transformations and applications of alkynyl acylazoliums pioneered or developed over the last decade under NHC-catalysis were summarized comprehensively. At the same time, the outlook for further investigation and exploration of novel reaction modes for alkynyl acylazoliums in the future was also discussed.

Effector Regulated Catalytic Cyclization of Alkynoic Acids Using Pt2L4 Cages

AbstractMetabolic pathways are highly regulated by effector molecules that influences the rate of enzymatic reactions. Inspired by the catalytic regulation found in living cells, we report a Pt2L4 cage of which the activity can be controlled by effectors that bind inside the cage. The cage shows catalytic activity in the lactonization of alkynoic acids, with the reaction rates dependent on the effector guest bound in the cage. Some effector guests enhance the rate of the lactonization by up to 19‐fold, whereas one decreases it by 5‐fold. When mixtures of specific substrates are used, both starting materials and products act as guests for the Pt2L4 cage, enhancing its catalytic activity for one substrate while reducing its activity for the other. The reported regulatory behavior obtained by the addition of effector molecules paves the way to the development of more complex, metabolic‐like catalyst systems.

Effector Regulated Catalytic Cyclization of Alkynoic Acids Using Pt2 L4 Cages.

Metabolic pathways are highly regulated by effector molecules that influences the rate of enzymatic reactions. Inspired by the catalytic regulation found in living cells, we report a Pt2 L4 cage of which the activity can be controlled by effectors that bind inside the cage. The cage shows catalytic activity in the lactonization of alkynoic acids, with the reaction rates dependent on the effector guest bound in the cage. Some effector guests enhance the rate of the lactonization by up to 19-fold, whereas one decreases it by 5-fold. When mixtures of specific substrates are used, both starting materials and products act as guests for the Pt2 L4 cage, enhancing its catalytic activity for one substrate while reducing its activity for the other. The reported regulatory behavior obtained by the addition of effector molecules paves the way to the development of more complex, metabolic-like catalyst systems.

Metal-Catalyzed Cascade Reactions between Alkynoic Acids and Dinucleophiles: A Review

Cascade reactions provide a straightforward access to many valuable compounds and reduce considerably the number of steps of a synthetic sequence. Among the domino and multicomponent processes that involve alkynes, the cascade reaction between alkynoic acids and C-, N-, O- and S-aminonucleophiles stands out as a particularly powerful tool for the one-pot construction of libraries of nitrogen-containing heterocyclic compounds with scaffold diversity and molecular complexity. This reaction, based on an initial metal-catalyzed cycloisomerization that generates an alkylidene lactone intermediate, was originally catalyzed by gold(I) catalysts, along with silver salts or Brönsted acid additives, but other alternative metal catalysts have emerged in the last decade as well as different reaction media. This review examines the existing literature on the topic of metal-catalyzed cascade reactions of acetylenic acids and dinucleophiles and discusses aspects concerning substrate/catalyst ratio for every catalyst system, nature of the aminonucleophile involved and substrate scope. In addition, alternative solvents are also considered, and an insight into the pathway of the reaction and possible intermediates is also provided.

NHC‐Palladium‐Catalyzed Cascade Annulation of Alkynoic Acids with Unactivated Alkenes in Ionic Liquids

AbstractAn N‐heterocyclic carbene palladium (NHC‐palladium)‐catalyzed cascade annulation of alkynoic acids with unactivated alkenes under an oxygen atmosphere in ionic liquids is described. This protocol enables facile access for the preparation of diverse alkyl substituted α‐methylene‐γ‐lactones in moderate to good yields with excellent Z/E selectivity. Moreover, the ionic liquid not only acts as the green solvent, but also as the eco‐friendly chlorine source, thus avoiding the use of excess metal halides such as cupric chloride. Some preliminary mechanistic studies were performed, which further revealed possible pathways for this cascade annulation.

Recent advances in catalytic decarboxylative transformations of carboxylic acid groups attached to a non-aromatic sp2 or sp carbon.

Chemists learn the most important transformations of the carboxylic acid functionality (COOH) from as early as the first semester of their studies. Carboxylic acids are not only safe to store and handle, but also broadly accessible with great structural diversity either from commercial sources or by means of a large variety of well-known synthesis routes. Consequently, carboxylic acids have long been recognized as a highly adaptable starting material in organic synthesis. A large body of reactions of carboxylic acids are based on catalytic decarboxylative conversions, in which the COOH group of carboxylic acids is catalytically replaced without trace by extrusion of CO2 chemo- and regioselectively. Within the last two decades, the area of catalytic decarboxylative transformations has expanded significantly by utilizing various classes of carboxylic acids as the substrate, including (hetero)aromatic acids, alkyl acids, α-keto acids, α,β-unsaturated acids and alkynoic acids. A literature survey reveals that compared to aromatic acids, the number of original research papers on decarboxylative reactions of α-keto acids, α,β-unsaturated acids and alkynoic acids has been rising every year lately, particularly within past five to six years. The prime aim of the current review is to give an overview of the decarboxylative transformations of α-keto acids, α,β-unsaturated acids and alkynoic acids that have been developed since 2017. The article focuses on the decarboxylative functionalizations that occur in the presence or absence of transition metal catalysts and/or under photoredox catalysis.

Iron-photocatalyzed double decarboxylative coupling reactions of alkynoic acids and alkyl carboxylic acids: access to alkylated alkynes

Under an iron-photocatalytic system, the double decarboxylative coupling reaction between alkynoic acids and alkyl carboxylic acids produced alkylated alkynes in good yields.

Transition metal-catalyzed alkynylation reactions via alkynyl carbon–carbon bond cleavage

This review focuses on the representative examples and most recent progresses in transition-metal-catalyzed cleavage of carbon–alkyne bonds in alkynoic acids, propargylic alcohols, alkynyl esters, and alkynyl ketones.

Ag(I)‐Promoted Decarboxylative Annulation of Alkynoic Acids towards 2‐Arylimidazo[1,2‐a]pyridines

AbstractA silver‐promoted decarboxylative annulation of alkynoic acids with 2‐aminopyridines has been developed to assemble 2‐arylimidazo[1,2‐a]pyridines. Various functionalities in the aromatic rings in the two substrates are well tolerated in this reaction and gave the desired products in good yields for a broad scope of substrates. Additional advantages of this protocol include mild reaction conditions and high regioselectivity. This report represents the first example of synthesis of 2‐arylimidazo[1,2‐a]pyridines from alkynoic acids.

Panchromatic Absorbers Tethered for Bioconjugation or Surface Attachment.

The syntheses of two triads are reported. Each triad is composed of two perylene-monoimides linked to a porphyrin via an ethyne unit, which bridges the perylene 9-position and a porphyrin 5- or 15-position. Each triad also contains a single tether composed of an alkynoic acid or an isophthalate unit. Each triad provides panchromatic absorption (350–700 nm) with fluorescence emission in the near-infrared region (733 or 743 nm; fluorescence quantum yield ~0.2). The syntheses rely on the preparation of trans-AB-porphyrins bearing one site for tether attachment (A), an aryl group (B), and two open meso-positions. The AB-porphyrins were prepared by the condensation of a 1,9-diformyldipyrromethane and a dipyrromethane. The installation of the two perylene-monoimide groups was achieved upon the 5,15-dibromination of the porphyrin and the subsequent copper-free Sonogashira coupling, which was accomplished before or after the attachment of the tether. The syntheses provide relatively straightforward access to a panchromatic absorber for use in bioconjugation or surface-attachment processes.

Iron-catalyzed cascade synthesis of nitrogen polycycles from alkynoic acids and functionalized amines

Catalysis by first-row transition metals is of increasing interest in the context of the scarcity of chemical resources. For instance, iron is promising due to its abundance, low toxicity and unique electronic features. Here we synthesized quinazoline alkaloids from alkynoic acids and functionalized amines in the presence of iron dibromide and pyridine in toluene or, alternatively, in a solventless reaction system. We studied iron sources, reaction media and the effect of additives. Results show 39–99% yields and regioselective preparation of nitrogen- and oxygen-containing scaffolds. This is the first example of a cascade process involving alkynoic acids catalyzed by iron. Fe is more abundant, cheaper and less toxic than other Au, Cu and Ru catalysts previously reported for similar transformations.

Synthesis of Carbene-Metal-Amido (CMA) Complexes and Their Use as Precatalysts for the Activator-Free, Gold-Catalyzed Addition of Carboxylic Acids to Alkynes.

A straightforward synthetic protocol leading to carbene-metal-amido (CMA) complexes (metal=Au, Cu) using a mild base and an environmentally desirable solvent (EtOH) has been explored, with a focus on complexes bearing backbone-substituted N-heterocyclic carbene (NHC) ligands, including BIAN-NHCs (BIAN=bis(imino)acenaphthene). The novel CMAs were structurally characterized, and gold-based CMAs bearing diverse NHCs were screened as simple, Brønsted-basic precatalysts. The readily accessible complexes display high catalytic activity in the intermolecular and intramolecular hydrocarboxylation of internal alkynes and alkynoic acids respectively, while the screening reveals the ancillary ligand effect of NHCs in these catalytic systems.

Intramolecular cyclization of alkynoic acid catalyzed by Na-salt-modified Au nanoparticles supported on metal oxides

Zirconia-supported sodium-salt-modified Au(0) nanoparticles (NPs) (Na-Au/ZrO2) catalyst was prepared, and it was stable and recyclable in the intramolecular cyclization of alkynoic acids. In particular, the effect of sodium species in Na-Au/ZrO2, which has been overlooked in previous studies, was studied, and they were found to play an essential role in the reaction. In addition, the relationship between the kinetics and size of Au NPs revealed that the active sites of the catalyst are located on the surface of the supported Au NPs. Moreover, detailed kinetic studies revealed that the cyclization was a zero-order reaction with respect to substrate concentration, and the rate-determining step of the reaction is presumed to be protodeauration. The maximum turnover number (TON) of the reaction of 5-hexynoic acid in a continuous flow reactor exceeded 9000, which is the highest TON obtained in the presence of a heterogeneous Au catalyst.