Alkali Metal Cations Research Articles

Electrolyte design for the manipulation of gas bubble detachment during hydrogen evolution reaction

During electrochemical gas evolution reactions, the continuous and vigorous formation of gas bubbles hugely impacts the efficiency of the underlying electrochemical processes. In particular, enhancing the detachment of gas bubbles from the electrode surface has emerged as an effective strategy to improve reaction efficiency. In this study, we demonstrate that the detachment of H2 gas bubbles can be controlled by the electrolyte composition, which can be optimized. We employ a well-defined Pt microelectrode and utilize electrochemical oscillation analysis to elucidate the features of H2 gas bubble detachment. Our investigation explores how the behaviour of H2 gas bubbles responds to variations in electrolyte composition and concentration. The coalescence efficiency of electrochemically generated microbubbles, a critical factor determining the mode of H2 gas bubble detachment (random detachment vs. single H2 gas bubble detachment), is profoundly influenced by the electrolyte composition. Specifically, coalescence efficiency follows the Hofmeister series concerning anions and coalescence is consistently inhibited in the presence of alkali metal cations. Furthermore, we establish a comprehensive model that accounts for both thermal and solutal Marangoni effects, allowing us to rationalize the trend of detachment size and period of single H2 gas bubbles under various conditions.

Cation Effects on the Acidic Oxygen Reduction Reaction at Carbon Surfaces.

Hydrogen peroxide (H2O2) is a widely used green oxidant. Until now, research has focused on the development of efficient catalysts for the two-electron oxygen reduction reaction (2e- ORR). However, electrolyte effects on the 2e- ORR have remained little understood. We report a significant effect of alkali metal cations (AMCs) on carbons in acidic environments. The presence of AMCs at a glassy carbon electrode shifts the half wave potential from -0.48 to -0.22 VRHE. This cation-induced enhancement effect exhibits a uniquely sensitive on/off switching behavior depending on the voltammetric protocol. Voltammetric and in situ X-ray photoemission spectroscopic evidence is presented, supporting a controlling role of the potential of zero charge of the catalytic enhancement. Density functional theory calculations associate the enhancement with stabilization of the *OOH key intermediate as a result of locally induced field effects from the AMCs. Finally, we developed a refined reaction mechanism for the H2O2 production in the presence of AMCs.

Cation-Induced Interfacial Hydrophobic Microenvironment Promotes the C-C Coupling in Electrochemical CO2 Reduction.

The electrochemical carbon dioxide reduction reaction (CO2RR) toward C2 products is a promising way for the clean energy economy. Modulating the structure of the electric double layer (EDL), especially the interfacial water and cation type, is a useful strategy to promote C-C coupling, but atomic understanding lags far behind the experimental observations. Herein, we investigate the combined effect of interfacial water and alkali metal cations on the C-C coupling at the Cu(100) electrode/electrolyte interface using ab initio molecular dynamics (AIMD) simulations with a constrained MD and slow-growth approach. We observe a linear correlation between the water-adsorbate stabilization effect, which manifests as hydrogen bonds, and the corresponding alleviation in the C-C coupling free energy. The role of a larger cation, compared to a smaller cation (e.g., K+ vs Li+), lies in its ability to approach the interface through desolvation and coordinates with the *CO+*CO moiety, partially substituting the hydrogen-bonding stabilizing effect of interfacial water. Although this only results in a marginal reduction of the energy barrier for C-C coupling, it creates a local hydrophobic environment with a scarcity of hydrogen bonds owing to its great ionic radius, impeding the hydrogen of surrounding interfacial water to approach the oxygen of the adsorbed *CO. This skillfully circumvents the further hydrogenation of *CO toward the C1 pathway, serving as the predominant factor through which a larger cation facilitates C-C coupling. This study unveils a comprehensive atomic mechanism of the cation-water-adsorbate interactions that can facilitate the further optimization of the electrolyte and EDL for efficient C-C coupling in CO2RR.

Tuning the Microenvironment of Water Confined in Ti3C2Tx MXene by Cation Intercalation.

The local microenvironment has recently been found to play a major role in the electrocatalytic activity of nanomaterials. Modulating the microenvironment by adding alkali metal cations into the electrolyte can be used to either suppress hydrogen or oxygen evolution, thereby extending the electrochemical window of energy storage systems, or to tune the selectivity of electrocatalysts. MXenes are a large family of two-dimensional transition metal carbides, nitrides, and carbonitrides that have shown potential for use in electrochemical energy storage applications. Due to their negatively charged surfaces, MXenes can accommodate cations and water molecules between the layers. Nevertheless, the nature of the aqueous microenvironment in the MXene interlayer space is poorly understood. Here, we apply Fourier transform infrared spectroscopy (FTIR) to probe the hydrogen bonding of intercalated water in Ti3C2Tx as a function of intercalated cation and relative humidity. Substantial changes in the FTIR spectra after cation exchange demonstrate that the hydrogen bonding of water molecules confined between the MXene layers is strongly cation-dependent. Furthermore, the IR absorbance of the confined water correlates with resistivity estimated by 4-point probe measurements and interlayer distance calculated from XRD patterns. This work demonstrates that cation intercalation strongly modulates the confined microenvironment, which can be used to tune the activity or selectivity of electrochemical reactions in the interlayer space of MXenes in the future.

Effect of alkali metal cation doping in graphitic carbon nitride towards photocatalytic generation of hydrogen peroxide under direct sunlight

H2O2, a powerful oxidant with a vast number of industrial applications, is being synthesized by the energy intensive anthraquinone process. Recently, H2O2 has been synthesized using H2O and O2 by photocatalysis. Graphitic carbon nitride (g-C3N4) is a popular low-cost photocatalyst that is known to produce H2O2. However, the properties g-C3N4 needs to be tailored to improve the yield of H2O2. We discuss such a modification of g-C3N4 by alkali metal cation doping. Among the Li+, Na+ and K+ ions, doping of 10 wt% of K+ in g-C3N4 increase the yield of H2O2 (200 μmol g−1 h−1) by 2.5 times as compared un-doped g-C3N4 under natural sunlight.

Molecular geochemistry of radium: A key to understanding cation adsorption reaction on clay minerals

Adsorption reactions of various cations on clay minerals have different effects on their environmental behaviors depending on the molecular-scale adsorption structure. Some cations form outer-sphere complexes via hydration, while others create inner-sphere complexes through dehydration. This preference dictates their environmental impact. However, the factors controlling these complex formations remain unclear. Furthermore, research on the adsorption preferences of radium (Ra) is lacking. Thus, this study conducted the first EXAFS study of Ra2+ adsorbed on clay minerals and showed that Ra2+ forms inner-sphere complexes on vermiculite, which can be surprising because Ra2+ is a divalent cation and prefers to be hydrated. In order to investigate the factors controlling the complex formations, this study conducted systematic EXAFS measurements and DFT calculations for alkali and alkaline earth metal cations. The results showed the importance of the size-matching effect between the adsorbed cation and the cavity of the tetrahedral sheets and that the complex formation can be estimated by the combination of the ionic radius and hydration enthalpy of the adsorbed cation. Furthermore, this study also analyzed environmental core samples. Their results showed the fixation of Ra2+ by clay minerals and the controlling factors can effectively predict cation environmental behavior.

Cellulose modified to host functionalities via facile cation exchange approach

Properties of cellulose are typically functionalized by organic chemistry means. We progress an alternative facile way to functionalize cellulose by functional group counter-cation exchange. While ion-exchange is established for cellulose, it is far from exploited and understood beyond the most common cation, sodium. We build on our work that established the cation exchange for go-to alkali metal cations. We expand and further demonstrate the introduction of functional cations, namely, lanthanides. We show that cellulose nanocrystals (CNCs) carrying sulfate-half ester groups can acquire properties through the counter-cation exchange. Trivalent lanthanide cations europium (Eu3+), dysprosium (Dy3+) and gadolinium (Gd3+) were employed. The respective ions showed distinct differences in their ability of being coordinated by the sulfate groups; with Eu3+ fully saturating the sulfate groups while for Gd3+ and Dy3+, values of 82 and 41 % were determined by compositional analysis. CNCs functionalized with Eu3+ displayed red emission, those containing Dy3+ exhibited no optical functionality, while those with Gd3+ revealed significantly altered magnetic relaxation times. Using cation exchange to alter cellulose properties in various ways is a tremendous opportunity for modification of the abundant cellulose raw materials for a renewable future.

Molecular understanding of the critical role of alkali metal cations in initiating CO2 electroreduction on Cu(100) surface

Molecular understanding of the solid–liquid interface is challenging but essential to elucidate the role of the environment on the kinetics of electrochemical reactions. Alkali metal cations (M+), as a vital component at the interface, are found to be necessary for the initiation of carbon dioxide reduction reaction (CO2RR) on coinage metals, and the activity and selectivity of CO2RR could be further enhanced with the cation changing from Li+ to Cs+, while the underlying mechanisms are not well understood. Herein, using ab initio molecular dynamics simulations with explicit solvation and enhanced sampling methods, we systematically investigate the role of M+ in CO2RR on Cu surface. A monotonically decreasing CO2 activation barrier is obtained from Li+ to Cs+, which is attributed to the different coordination abilities of M+ with *CO2. Furthermore, we show that the competing hydrogen evolution reaction must be considered simultaneously to understand the crucial role of alkali metal cations in CO2RR on Cu surfaces, where H+ is repelled from the interface and constrained by M+. Our results provide significant insights into the design of electrochemical environments and highlight the importance of explicitly including the solvation and competing reactions in theoretical simulations of CO2RR.

Immobilized Tetraalkylammonium Cations Enable Metal-free CO2 Electroreduction in Acid and Pure Water.

Carbon dioxide reduction reaction (CO2 RR) provides an efficient pathway to convert CO2 into desirable products, yet its commercialization is greatly hindered by the huge energy cost due to CO2 loss and regeneration. Performing CO2 RR under acidic conditions containing alkali cations can potentially address the issue, but still causes (bi)carbonate deposition at high current densities, compromising product Faradaic efficiencies (FEs) in present-day acid-fed membrane electrode assemblies. Herein, we present a strategy using a positively charged polyelectrolyte-poly(diallyldimethylammonium) immobilized on graphene oxide via electrostatic interactions to displace alkali cations. This enables a FE of 85 %, a carbon efficiency of 93 %, and an energy efficiency (EE) of 35 % for CO at 100 mA cm-2 on modified Ag catalysts in acid. In a pure-water-fed reactor, we obtained a 78 % CO FE with a 30 % EE at 100 mA cm-2 at 40 °C. All the performance metrics are comparable to or even exceed those attained in the presence of alkali metal cations.

Immobilized Tetraalkylammonium Cations Enable Metal‐free CO2 Electroreduction in Acid and Pure Water

AbstractCarbon dioxide reduction reaction (CO2RR) provides an efficient pathway to convert CO2 into desirable products, yet its commercialization is greatly hindered by the huge energy cost due to CO2 loss and regeneration. Performing CO2RR under acidic conditions containing alkali cations can potentially address the issue, but still causes (bi)carbonate deposition at high current densities, compromising product Faradaic efficiencies (FEs) in present‐day acid‐fed membrane electrode assemblies. Herein, we present a strategy using a positively charged polyelectrolyte—poly(diallyldimethylammonium) immobilized on graphene oxide via electrostatic interactions to displace alkali cations. This enables a FE of 85 %, a carbon efficiency of 93 %, and an energy efficiency (EE) of 35 % for CO at 100 mA cm−2 on modified Ag catalysts in acid. In a pure‐water‐fed reactor, we obtained a 78 % CO FE with a 30 % EE at 100 mA cm−2 at 40 °C. All the performance metrics are comparable to or even exceed those attained in the presence of alkali metal cations.

DFT study of electrostatic effects upon methane activation by early, high-valent multiply bonded complexes

The research presented here focuses on the electrostatic effect of varying alkali metal cations (Li+ through Cs+) in the outer coordination sphere of model methane activating complexes with metal-nitrogen multiple bonds. Lighter metal alkali metal cations yield reduced methane activation barriers (ΔG‡), with the lowest barrier computed for the Li+ salt; moreover, all modeled salts have lower ΔG‡ than the corresponding anion in polar solvents. Via variation of the polarity of continuum solvents, this research also indicates that electrostatic effects are likely to be manifested most significantly in the low polarity, hydrophobic solvents typically used for inorganic and organometallic complexes capable of methane activation. Taken together, the results of these DFT simulations suggest that electrostatic effects have the potential to significantly decrease methane activation barriers.

The Hydrophilic C-terminus of Yeast Plasma-membrane Na+/H+ Antiporters Impacts Their Ability to Transport K+

Yeast plasma-membrane Na+/H+ antiporters (Nha/Sod) ensure the optimal intracellular level of alkali-metal cations and protons in cells. They are predicted to consist of 13 transmembrane segments (TMSs) and a large hydrophilic C-terminal cytoplasmic part with seven conserved domains. The substrate specificity, specifically the ability to recognize and transport K+ cations in addition to Na+ and Li+, differs among homologs. In this work, we reveal that the composition of the C-terminus impacts the ability of antiporters to transport particular cations. In the osmotolerant yeast Zygosaccharomyces rouxii, the Sod2-22 antiporter only efficiently exports Na+ and Li+, but not K+. The introduction of a negative charge or removal of a positive charge in one of the C-terminal conserved regions (C3) enabled ZrSod2-22 to transport K+. The same mutations rescued the low level of activity and purely Li+ specificity of ZrSod2-22 with the A179T mutation in TMS6, suggesting a possible interaction between this TMS and the C-terminus. The truncation or replacement of the C-terminal part of ZrSod2-22 with the C-terminus of a K+-transporting Nha/Sod antiporter (Saccharomyces cerevisiae Nha1 or Z. rouxii Nha1) also resulted in an antiporter with the capacity to export K+. In addition, in ScNha1, the replacement of three positively charged arginine residues 539–541 in the C3 region with alanine caused its inability to provide cells with tolerance to Li+. All our results demonstrate that the physiological functions of yeast Nha/Sod antiporters, either in salt tolerance or in K+ homeostasis, depend on the composition of their C-terminal parts.

Intra-host π-π interactions in crown ether complexes revealed by cryogenic ion mobility-mass spectrometry.

Cryogenic ion mobility-mass spectrometry was performed to investigate the relative abundance of conformers of dinaphtho-24-crown-8 (DN24C8) complexes with alkali metal cations M+ (M = Li, Na, K, Rb, and Cs). The "closed" conformers of M+(DN24C8) with short distances between two naphthalene rings in the crown ethers were predominantly observed for all complexes at 86 K. The two noncovalent interactions, host-guest and intra-host interactions, were analyzed separately by density functional theory calculations to reveal the origin of the stability of the closed conformers. As a result, it was revealed that the intra-host π-π interactions have a more critical role in determining the stability of the conformers than the host-guest interactions. The closed conformers of M+(DN24C8) also have wider regions of the π-π interactions than those of the M+(dibenzo-24-crown-8) complexes.

Electric field induced associations in the double layer of salt-in-ionic-liquid electrolytes.

Ionic liquids (ILs) are an extremely exciting class of electrolytes for energy storage applications. Upon dissolving alkali metal salts, such as Li or Na based salts, with the same anion as the IL, an intrinsically asymmetric electrolyte can be created for use in batteries, known as a salt-in-ionic liquid (SiIL). These SiILs have been well studied in the bulk, where negative transference numbers of the alkali metal cation have been observed from the formation of small, negatively charged clusters. The properties of these SiILs at electrified interfaces, however, have received little to no attention. Here, we develop a theory for the electrical double layer (EDL) of SiILs where we consistently account for the thermoreversible association of ions into Cayley tree aggregates. The theory predicts that the IL cations first populate the EDL at negative voltages, as they are not strongly bound to the anions. However, at large negative voltages, which are strong enough to break the alkali metal cation-anion associations, these IL cations are exchanged for the alkali metal cation because of their higher charge density. At positive voltages, we find that the SiIL actually becomes more aggregated while screening the electrode charge from the formation of large, negatively charged aggregates. Therefore, in contrast to conventional intuition of associations in the EDL, SiILs appear to become more associated in certain electric fields. We present these theoretical predictions to be verified by molecular dynamics simulations and experimental measurements.

Assembly of anionic silver nanoclusters with controlled packing structures through site-specific ionic bridges.

The assembly of metal nanoclusters (NCs) into crystalline lattice structures is of interest in the development of NC-based functional materials. Here we demonstrate that the assembled structures of tri-anionic tetrahedral symmetric [Ag29(BDT)12]3- (Ag29 NC, BDT: 1,3-benzenedithiol) NCs are controlled into a polyethylene-like zigzag chain and a "poly-ring-fused-cyclohexane"-like honeycomb arrangement through ionic interactions with alkali metal cations such as K+ and Cs+. The site-specific binding of alkali metal ions on the tetrahedrally arranged binding sites of Ag29 NCs successfully connects the adjacent NCs into various packing modes. The number and type of bridges between NCs determine the Ag29 NC packing structures, which are affected by the solvent species, enabling the transformation of packing modes in the single-crystalline state. The photoluminescence (PL) properties of the crystals responded to the packing modes of the NCs in terms of anisotropy and bridge linkage style inducing a varied degree of relaxation of the excited state depending on the relocation mobility of alkali metal ions in the crystals.

Effect of alkali-metal cation on oxygen adsorption at Pt single-crystal electrodes in non-aqueous electrolytes.

The effect of Group 1 alkali-metal cations (Na+, K+, and Cs+) on the oxygen reduction and evolution reactions (ORR and OER) using dimethyl sulfoxide (DMSO)-based electrolytes was investigated. Cyclic voltammetry (CV) utilising different Pt-electrode surfaces (polycrystalline Pt, Pt(111) and Pt(100)) was undertaken to investigate the influence of surface structure upon the ORR and OER. For K+ and Cs+, negligible variation in the CV response (in contrast to Na+) was observed using Pt(111), Pt(100) and Pt(poly) electrodes, consistent with a weak surface-metal/superoxide complex interaction. Indeed, changes in the half-wave potentials (E1/2) and relative intensities of the redox peaks corresponding to superoxy (O2-) and peroxy (O22-) ion formation were consistent with a solution-mediated mechanism for larger cations, such as Cs+. Support for this finding was obtained via in situ shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). During the ORR and in the presence of Cs+, O2- and weakly adsorbed caesium superoxide (CsO2) species were detected. Because DMSO was found to strongly interact with the surface at potentials associated with the ORR, CsO2 was readily displaced at more negative potentials via increased solvent adsorption at the surface. This finding highlights the important impact of the solvent during ORR/OER reactions.

Tracking the surface structure and the influence of cations and anions on the double-layer region of a Au(111) electrode.

We examined the electric double-layer (EDL) of a Au(111) electrode in a dilute perchloric acid solution using a combination of capacitance measurements and in situ scanning tunnelling microscopy under electrochemical conditions (ECSTM). The "camel-shaped" capacitance curve of the EDL is studied with different cations and anions, including their impact on the potential of zero charge (PZC). We show that the ECSTM images of thermally reconstructed and of the potential-induced surface reconstruction of Au(111) in perchloric acid electrolyte resemble previous work in sulphuric acid, displaying a herringbone pattern for a thermally reconstructed surface. Once the reconstruction is lifted, the Au(111) forms islands with an average of 1 atomic step height. When the potential is lowered below that of the PZC, the potential-induced surface reconstruction results in a more disoriented pattern than the thermally reconstructed surface. ECSTM images at different potentials are correlated with the voltammogram to understand the time and potential dependence of the surface. This correlation has led to the development of a potential window technique that can be used to reveal the surface structure of Au(111) based on observing the changes in PZC in the voltammogram. This method provides an indirect approach to understanding the surface structure without always relying on ECSTM. From the voltammogram, we also observed that anions (SO42-, CH3SO3-, ClO4-, F-) interact more strongly with the Au(111) surface than the alkali cations. The cation capacitance peak shape does not depend strongly on the identity of the alkali metal cation (Li+, Na+, K+). However, the anion capacitance peak depends strongly on the anion identity. It suggests that some level of specific adsorption cannot be excluded, even for anions that are traditionally not considered to adsorb specifically (perchlorate, fluoride).

The effect of surface hydrophobicity and hydrophilicity on ion-ion interactions at water-solid interfaces.

Condensation and arrangement of ions at water-solid interfaces are of great importance in the formation of electrical double layers (EDL) and the transport of ions under a confined geometry. So far, the microscopic understanding of interfacial ion configurations is still far from complete, especially when the local ion concentration is high and ion-ion interactions become prominent. In this study, we directly visualized alkali metal cations within the hydrogen-bonding network of water on graphite and Cu(111)-supported graphene surfaces, using qPlus-based noncontact atomic force microscopy (NC-AFM). We found that the codeposition of the alkali cations and water molecules on the hydrophobic graphite surface leads to the formation of an ion-doped bilayer hexagonal ice (BHI) structure, where the ions are repelled from each other and scattered in a disordered distribution. In contrast, the hydrated alkali cations aggregate in one dimension on the more hydrophilic graphene/Cu(111) surface, forming a nematic state with a long-range order. Such a nematic state arises from the delicate interplay between water-ion and water-water interactions under surface confinement. These results reveal the high sensitivity of ion-ion interactions and ionic ordering to the surface hydrophobicity and hydrophilicity.

Alkali metal reduction of crown ether encapsulated alkali metal cations.

[{SiNDipp}BeClM]2 ({SiNDipp} = {CH2SiMe2N(Dipp)}2; M = Li, Na, K, Rb) are converted to ionic species by treatment with a crown ether. Whereas the lithium derivative reacts with Na or K to provide [{SiNDipp}BeCl]-[M(12-cr-4)2]+ (M = Na, K), the resultant sodium species is resistant to reduction by potassium. These observations are rationalised by a hybrid experimental/theoretical analysis.

Amino-functionalization enhanced CO2 reduction reaction in pure water.

The electrochemical reduction of carbon dioxide (CO2RR) to carbon monoxide represents a cost-effective pathway towards realizing carbon neutrality. To suppress the hydrogen evolution reaction (HER), the presence of alkali cations is critical, which can however lead to precipitate formation on the electrode, adversely impacting the device stability. Employing pure water as the electrolyte in zero-gap CO2 electrolyzers can address this challenge, albeit at the cost of diminished catalyst performance due to the absence of alkali cations. In this study, we introduce a novel approach by implementing amino modifications on the catalyst surface to mimic the function of alkali metal cations, while simultaneously working in pure water. This modification enhances the adsorption of carbon dioxide and protons, thereby facilitating the CO2RR while concurrently suppressing the HER. Utilizing this strategy in a zero-gap CO2 electrolyzer with pure water as the anolyte resulted in an impressive carbon monoxide faradaic efficiency (FECO) of 95.5% at a current density of 250 mA cm-2, while maintaining stability for over 180 hours without any maintenance.