Retrieval Algorithm Research Articles

Evaluation of Physical Microphysical Property Retrieval Algorithms During the 2020 IMPACTS Field Campaign

Abstract The NASA Investigation of Microphysics and Precipitation for Atlantic Coast Threatening Snowstorms (IMPACTS) field campaign provides high-quality, high-altitude aircraft lidar (532 nm), radar (W-band) and in-cloud microphysical aircraft data taken during wintertime storm events impacting the United States. This study evaluates two mass-dimensional relationships (Brown and Francis (1995, BF95); Heymsfield (2014, H14) and two lidar-radar microphysical retrieval algorithms (Cloudsat and CALIPSO Ice Cloud Property Product (2C-ICE); VarPy (a variational method derived from the satellite lidar-radar data community)) to estimate aircraft-retrieved volume extinction coefficient (σ), ice water content (IWC), and effective radius (re) during the 2020 IMPACTS deployment. BF95 and H14 have a close 1:1 correlation (R2 = 0.98) with in-situ observations of σ. However, only BF95 displays a linear, consistent, and almost temperature-independent low bias for IWC and re, which likely arises from the environmental conditions used to determine each. Unlike the field-campaign-derived BF95 and H14 relationships, VarPy and 2C-ICE directly ingest the aircraft-based lidar and radar data to simulate σ, IWC, and re. For all three microphysical parameters, VarPy and 2C-ICE retrieval errors became notably more pronounced around the dendritic growth zone (−15°C to −10°C) and near freezing (≥−5°C), which suggests that both algorithms experience difficulty addressing riming and aggregation processes and with larger particles (dendrites and plates) due in part to their simplified ice particle assumptions. However, the mean-melt diameter ice-particle assumption did yield more accurate IWC estimates, which led to slightly better overall results for VarPy.

An enhanced method for reconstruction of full SIF spectrum for near-ground measurements

Recently the applications of remotely sensed Solar-Induced chlorophyll Fluorescence (SIF) in the study of photosynthesis, stress conditions, and gross primary production have increased significantly. The full SIF spectrum spans over a spectral region of 650 ∼ 850 nm with two characteristic peaks around 685 nm and 740 nm. Over recent decades, many retrieval algorithms have been developed to estimate SIF at Top-Of-Canopy (TOC) using in-situ measurements of solar irradiance and canopy radiance spectra. Although the majority of retrieval methods retrieve SIF at a narrow spectral window, there exists a potential for retrieval of SIF in the full emission spectrum. Moreover, solar irradiance and canopy radiance spectra should ideally be measured at the same time but are usually measured sequentially with a certain time lag, raising potential errors in SIF retrieval. In this study, an enhanced retrieval algorithm of the full SIF spectrum at TOC is proposed. The proposed algorithm attempts to minimize the errors owing to time mismatch in measurements of solar irradiance and canopy radiance spectra. As an improvement to the previous algorithm (advanced Fluorescence Spectrum Reconstruction, aFSR), this proposed algorithm (aFSR-SVE) models the SIF-free contribution with principal components using the singular value decomposition technique. The optimal parameter settings in the forward model were determined for the experimental data collected by spectrometers used in the study. Firstly, the proposed algorithm was used to reconstruct full SIF spectrum for simulated data. The results were compared with known reference SIF values. After achieving satisfying results from simulated data, the proposed algorithm was compared with retrievals from established algorithms using experimental data. The results show improved SIF retrieval accuracy, without the need to simultaneously measure solar irradiance and canopy radiance spectra. The retrieval values comply with the results of previous algorithms in terms of spectral shape, diurnal trend, and temporal variations. The induced errors in SIF retrievals due to non-simultaneous measurements of solar irradiance and canopy radiance spectra were also investigated and the proposed algorithm was found to be less prone to such errors. Hence, the proposed algorithm is an improvement in reconstructing the full SIF spectrum with near-ground measurements. With the help of the proposed algorithm, field measurements using sequential systems and automated measurements of multiple targets can be performed effectively as it relaxes the requirement of concurrent measurement of solar irradiance and canopy radiance spectra. For future work, the applicability of this method can be investigated under more variable illumination conditions, like high cirrus clouds, passing clouds or persistent thin clouds.

A dynamic authorizable ciphertext image retrieval algorithm based on security neural network inference.

In this paper, we propose a dynamic authorizable ciphertext image retrieval scheme based on secure neural network inference that effectively enhances the security of image retrieval while preserving privacy. To ensure the privacy of the original image and enable feature extraction without decryption operations, we employ a secure neural network for feature extraction during the index construction stage of encrypted images. Additionally, we introduce a dynamic authenticatable ciphertext retrieval algorithm to enhance system flexibility and security by enabling users to quickly and flexibly retrieve authorized images. Experimental results demonstrate that our scheme guarantees data image privacy throughout the entire process from upload to retrieval compared to similar literature schemes. Furthermore, our scheme ensures data availability while maintaining security, allowing users to conveniently perform image retrieval operations. Although overall efficiency may not be optimal according to experimental results, our solution satisfies practical application needs in cloud computing environments by providing an efficient and secure image retrieval solution.

Tropospheric NO2 retrieval algorithm for geostationary satellite instruments: applications to GEMS

Abstract. In this study, we develop an advanced retrieval algorithm for tropospheric nitrogen dioxide (NO2) from the geostationary satellite instruments and apply it to Geostationary Environment Monitoring Spectrometer (GEMS) observations. Overall, the algorithm follows previous heritage for the polar-orbiting satellites Global Ozone Monitoring Experiment-2 (GOME-2) and Tropospheric Monitoring Instrument (TROPOMI), but several improvements are implemented to account for specific features of geostationary satellites. The DLR GEMS NO2 retrieval employs an extended fitting window compared to the current fitting window used in GEMS operational v2.0 NO2 retrieval, which results in improved spectral fit quality and lower uncertainties. For the stratosphere–troposphere separation in GEMS measurements, two methods are developed and evaluated: (1) STRatospheric Estimation Algorithm from Mainz (STREAM) as used in the DLR TROPOMI NO2 retrieval and adapted to GEMS and (2) estimation of stratospheric NO2 columns from the Copernicus Atmosphere Monitoring Service (CAMS) Integrated Forecast System (IFS) cycle 48R1 model data, which introduce full stratospheric chemistry as it will be used in the operational Sentinel-4 NO2 retrieval. While STREAM provides hourly estimates of stratospheric NO2, it has limitations in describing small-scale variations and exhibits systematic biases near the boundary of the field of view. In this respect, the use of estimated stratospheric NO2 columns from the CAMS forecast model profile demonstrates better applicability by describing not only diurnal variation but also small-scale variations. For the improved air mass factor (AMF) calculation, sensitivity tests are performed using different input data. In our algorithm, cloud fractions retrieved from the Optical Cloud Recognition Algorithm (OCRA) adapted to GEMS level 1 data are applied instead of the GEMS v2.0 cloud fraction. OCRA is used operationally in TROPOMI and Sentinel-4. Compared to the GEMS level 2 cloud fraction which is typically set to around 0.1 for clear-sky scenes, OCRA sets cloud fractions close to or at 0. The OCRA-based cloud corrections result in increased tropospheric AMFs and decreased tropospheric NO2 vertical columns, leading to better agreement with results from existing TROPOMI observations. The effects of surface albedo on GEMS tropospheric NO2 retrievals are assessed by comparing the GEMS v2.0 background surface reflectance (BSR) and TROPOMI Lambertian-equivalent reflectivity (LER) climatology v2.0 product. The differences between the two surface albedo products and their impact on tropospheric AMF are particularly pronounced over snow/ice scenes during winter. A priori NO2 profiles from the CAMS forecast model, applied in the DLR GEMS algorithm, effectively capture variations in NO2 concentrations throughout the day with high spatial resolution and the advanced chemical mechanism, which demonstrates its suitability for geostationary satellite measurements. The retrieved DLR GEMS tropospheric NO2 columns show good capability for capturing hotspot signals at the scale of city clusters and describe spatial gradients from city centres to surrounding areas. Diurnal variations of tropospheric NO2 columns over Asia are well described through hourly sampling of GEMS. Evaluation of DLR GEMS tropospheric NO2 columns against TROPOMI v2.4 and GEMS v2.0 operational products shows overall good agreement. The uncertainty of DLR GEMS tropospheric NO2 vertical columns varies based on observation scenarios. In regions with low pollution levels such as open-ocean and remote rural areas, retrieval uncertainties typically range from 10 % to 50 %, primarily due to uncertainties in slant columns. For heavily polluted regions, uncertainties in tropospheric NO2 columns are mainly driven by errors in tropospheric AMF calculations. Notably, the total uncertainty in GEMS tropospheric NO2 columns is most significant in winter, particularly over heavily polluted regions with low-level clouds below or near the NO2 peak.

Secure authentication and encryption via diffraction imaging-based encoding and vector decomposition

Abstract Traditional optical encryption systems have security risks due to their linearity and usually encounter problems such as the heavy burden of key transmission and storage. This paper proposes a novel security-enhanced optical image authentication and encryption framework that combines diffractive imaging-based encryption with the vector decomposition algorithm (VDA). Chaotic random phase masks (CRPMs) are used to encrypt data for authentication via VDA, and a pair of complementary binary matrix keys are utilized to extract information from the encrypted data to generate ciphertext. During the authentication and decryption processes, a sparse reference image is reconstructed from the ciphertext for verification. If the authentication is successful, image decryption can be executed using a key-assisted phase retrieval algorithm. The employment of nonlinear VDA, an additional layer of authentication, and the use of CRPMs and binary matrix keys enhance security and address key burden concerns. Simulation results demonstrate the feasibility, effectiveness, and security of the scheme.

Ozone Detector Based on Ultraviolet Observations on the Martian Surface

Ozone plays a key role in both atmospheric chemistry and UV absorption in planetary atmospheres. On Mars, upper-tropospheric ozone has been widely characterized by space-based instruments. However, surface ozone remains poorly characterized, hindered by the limited sensitivity of orbiters to the lowest scale height of the atmosphere and challenges in delivering payloads to the surface of Mars, which have prevented, to date, the measurement of ozone from the surface of Mars. Systematic measurements from the Martian surface could advance our knowledge of the atmospheric chemistry and habitability potential of this planet. NASA’s Mars 2020 mission includes the first ozone detector deployed on the Martian surface, which is based on discrete photometric observations in the ultraviolet band, a simple technology that could obtain the first insights into total ozone abundance in preparation for more sophisticated measurement techniques. This paper describes the Mars 2020 ozone detector and its retrieval algorithm, including its performance under different sources of uncertainty and the potential application of the retrieval algorithm on other missions, such as NASA’s Mars Science Laboratory. Pre-landing simulations using the UVISMART radiative transfer model suggest that the retrieval is robust and that it can deal with common issues affecting surface operations in Martian missions, although the expected low ozone abundance and instrument uncertainties could challenge its characterization in tropical latitudes of the planet. Other space missions will potentially include sensors of similar technology.

Application of Sentinel-2 imagery for total suspended solids mapping off the Bodri River, Kendal Regency, Indonesia

Total suspended solids (TSS) is one of the key parameters in water quality monitoring. TSS dynamics off the seas of Bodri River can be observed using Sentinel-2. This research validates Wirasatriya and Laili's algorithm and redevelops a TSS retrieval algorithm based on in situ TSS and Sentinel-2 reflectance (Rrs). During the satellite's passing time, water sampling for TSS was conducted at 64 stations at a depth of 0.5m in October 2023. Bottom of Atmosphere (BoA) Rrs data were obtained from SNAP software, which had previously performed image cropping and resampling. Rrs data from all bands were initially correlated with in situ TSS. The validation results of Wirasatriya and Laili's algorithms obtained very high of RMSE values reaching 272.23 mg/L and 33.08 mg//L. While the results of generating the algorithm produced better the performance of the algorithmic model with RMSE = 7.34 mg/L, MAPE = 14.24%, and bias = 0.99. The development of the algorithms in the study based on the green band (B3) resulted in the equation: TSS (mg/L) = 4.6698exp10.609∗B3, which was further used for temporal mapping. High TSS was found in nearshore areas and river mouths influenced by shallow waters. Temporally, high TSS was found in October (55.65 mg/L) and low in May (11 mg/L). The temporal variation pattern is influenced by precipitation and tides. The findings of this algorithm are very important for analyzing the evolution of land accretion in the Bodri River estuary and as a review for land management in upland areas and can be used to monitor other shallow areas.

Troposphere–stratosphere-integrated bromine monoxide (BrO) profile retrieval over the central Pacific Ocean

Abstract. Bromine monoxide (BrO) is relevant to atmospheric oxidative capacity, affecting the lifetime of greenhouse gases (i.e., methane, dimethylsulfide) and mercury oxidation. However, measurements of BrO radical vertical profiles are rare, and BrO is highly variable. As a result, the few available aircraft observations in different regions of the atmosphere are not easily reconciled. Autonomous multi-axis differential optical absorption spectroscopy (MAX-DOAS) instruments placed at remote mountaintop observatories (MT-DOAS) present a cost-effective alternative to aircraft, with the potential to probe the climate-relevant yet understudied free troposphere more routinely. Here, we describe an innovative full-atmosphere BrO and formaldehyde (HCHO) profile retrieval algorithm using MT-DOAS measurements at Mauna Loa Observatory (MLO – 19.536° N, 155.577° W; 3401 m a.s.l.). The retrieval is based on time-dependent optimal estimation and simultaneously inverts 190+ individual BrO (and formaldehyde, HCHO) SCDs (slant column densities; SCD = dSCD + SCDRef) from solar stray light spectra measured in the zenith and off-axis geometries at high and low solar zenith angles (92° > SZA > 30°) to derive BrO concentration profiles from 1.9 to 35 km with 7.5 degrees of freedom (DoFs). Two case study days are characterized by the absence (26 April 2017, base case) and presence of a Rossby-wave-breaking double tropopause (29 April 2017, RW-DT case). Stratospheric-BrO vertical columns are nearly identical on both days (VCD = (1.5 ± 0.2) × 1013 molec. cm−2), and the stratospheric-BrO profile peaks at a lower altitude during the RW-DT (1.6–2.0 DoFs). Tropospheric-BrO VCDs increase from (0.70 ± 0.14) × 1013 molec. cm−2 (base case) to (1.00 ± 0.14) × 1013 molec. cm−2 (RW-DT) owing to a 3-fold increase in BrO in the upper troposphere (1.7–1.9 DoFs). BrO at MLO increases from (0.23 ± 0.03) pptv (base case) to (0.46 ± 0.03) pptv (RW-DT) and is characterized by an added time resolution (∼ 3.8 DoFs). Up to (0.9 ± 0.1) pptv BrO is observed above MLO in the lower free troposphere in the absence of the double tropopause. We validate the retrieval using aircraft BrO profiles and in situ HCHO measurements aboard the NSF/NCAR GV aircraft above MLO (11 January 2014) that establish BrO peaks around 2.4 pptv above 13 km in the upper troposphere–lower stratosphere (UTLS) during a similar RW-DT event (0.83 × 1013 molec. cm2 tropospheric-BrO VCD above 2 km). The tropospheric-BrO profile measured using MT-DOAS (RW-DT case) and using the aircraft agree well (after averaging-kernel smoothing). Furthermore, these tropospheric-BrO profiles over the central Pacific Ocean are found to closely resemble those over the eastern Pacific Ocean (2–14 km) and are in contrast to those over the western Pacific Ocean, where a C-shaped tropospheric-BrO profile shape has been observed.

Adaptive support constraint based on pixel difference distribution for twin-image removal in in-line holography

A tight support domain can enhance the reconstruction effect of phase retrieval algorithms using a support domain constraint. Hence, an adaptive support method based on pixel difference distribution to calculate a more accurate support domain is proposed in this paper. The support domain is continuously updated at each iteration of the phase retrieval algorithm, resulting in a support domain that closely corresponds to the shape and size of the object. Simulations are conducted to investigate the reconstruction effect of complex-valued objects as well as the influence of varying the binarization threshold and the difference window size on the convergence performance in the absence of noise. The changing dynamics of the support domain during the iterative process are also showcased. The experiments demonstrate that the adaptive support method can improve the reconstruction image quality and image contrast under actual conditions. Both simulations and experiments affirm the feasibility of this approach.

Non-collinear bipulse reconstruction via dispersion scan

Light pulses in the femtosecond range require sophisticated methods for their precise temporal characterization. Several techniques have been developed over the past decades that deliver the temporal structure of ultrashort light pulses. Still, there are special cases left that cannot be treated directly by established methods. Here we expand the applicability of existing tools to the case of non-collinear propagation of a pair of identical pulses with an unknown, but fixed temporal spacing. By applying the successful dispersion scan (d-scan) technique to a setup known from the established frequency-resolved optical gating (FROG) technique, we record a rather peculiar measurement trace. A nonlinear signal is only generated outside optimal temporal compression, in contrast to previously used techniques. This feature enables an improved dynamic range for the measurement of the temporal wings of a pulse. We expand a well-established retrieval algorithm to reconstruct the pulse structure from the measurement data. Our results are confirmed by comparison to d-scan and FROG measurements.

Static X-ray differential phase contrast imaging via bidirectional-misalignment grating

Grating-based X-ray differential phase contrast imaging (GB-DPCI) offers excellent imaging contrast for soft tissues. Limited by the phase stepping of gratings, the conventional GB-DPCI leads to a high radiation dose. This study presents a static GB-DPCI method employing an analyzer grating with a misaligned structure in both vertical and horizontal directions. A signal retrieval algorithm is developed for this method to permit the use of neighboring pixels on the detector to approximate multiple phase stepping positions, thereby obtaining the phase contrast signal in a single exposure. This study reduces high radiation doses and time-consumption caused by phase stepping. The presented method is validated with datasets from a laboratory X-ray tube and synchrotron radiation. Considering synchrotron results as example, minimal improvements in Feature Similarity Index Measure are 2.48%, 6.31%, and 7.06% for absorption, dark field, and phase contrasts, and in Information-Weight Structure Similarity Index Measure are 3.24%, 16.07%, and 8.61%.

The First Validation of Aerosol Optical Parameters Retrieved from the Terrestrial Ecosystem Carbon Inventory Satellite (TECIS) and Its Application

In August 2022, China successfully launched the Terrestrial Ecosystem Carbon Inventory Satellite (TECIS). The primary payload of this satellite is an onboard multi-beam lidar system, which is capable of observing aerosol optical parameters on a global scale. This pioneering study used the Fernald forward integration method to retrieve aerosol optical parameters based on the Level 2 data of the TECIS, including the aerosol depolarization ratio, aerosol backscatter coefficient, aerosol extinction coefficient, and aerosol optical depth (AOD). The validation of the TECIS-retrieved aerosol optical parameters was conducted using CALIPSO Level 1 and Level 2 data, with relative errors within 30%. A comparison of the AOD retrieved from the TECIS with the AERONET and MODIS AOD products yielded correlation coefficients greater than 0.7 and 0.6, respectively. The relative error of aerosol optical parameter profiles compared with ground-based measurements for CALIPSO was within 40%. Additionally, the correlation coefficients R2 with MODIS and AERONET AOD were approximately between 0.5 and 0.7, indicating the high accuracy of TECIS retrievals. Utilizing the TECIS retrieval results, combined with ground air quality monitoring data and HYSPLIT outcomes, a typical dust transport event was analyzed from 2 to 7 April 2023. The results indicate that dust was transported from the Taklamakan Desert in Xinjiang, China, to Henan and Anhui provinces, with a gradual decrease in the aerosol depolarization ratio and backscatter coefficient during the transport process, causing varying degrees of pollution in the downstream regions. This research verifies the accuracy of the retrieval algorithm through multi-source data comparison and demonstrates the potential application of the TECIS in the field of aerosol science for the first time. It enables the fine-scale regional monitoring of atmospheric aerosols and provides reliable data support for the three-dimensional distribution of global aerosols and related scientific applications.

Improving coniferous forests leaf area index estimation by filling the occluded point cloud from airborne laser scanning

Accurate estimation of Leaf Area Index (LAI) is pivotal for understanding vegetation dynamics and ecosystem productivity. Light Detection and Ranging (LiDAR), with its capability to directly capture the three-dimensional (3D) structure of vegetation, offers a promising method for LAI estimation. However, dense leaves, especially coniferous forest, can significantly occlude the penetration of laser beams during Airborne Laser Scanning (ALS) as they traverse the canopy from above. This occlusion results in incomplete point cloud, leading to underestimation of LAI due to the omission of some leaves. Considering the characteristic of leaf clumping growth in coniferous vegetation, a method based on voxelizing point cloud and modeling correlations among neighborhood voxels was developed in this study to fill the occluded point cloud at plot level. The proposed method was validated by applying it to Loblolly pine (Pinus taeda L.) plots. Validation against field-measured LAI demonstrates that the method proposed for filling the occluded point cloud markedly enhances LAI retrieval accuracy, achieving an R2 of 0.7069 and an RMSE of 0.4760. In contrast, LAI retrieval using the original canopy point cloud yielded an R2 of 0.2835 and an RMSE of 1.5883. This advancement highlights a shift from focusing on enhancing retrieval algorithms to addressing data completeness and reliability, offering new perspectives for LAI retrieval research.

Quantitative phase imaging with two in-line holograms.

Quantitative phase imaging (QPI) has emerged as a practical technique for acquiring structural information from phase objects. Digital holography can realize phase detection, but it is limited by a spatial bandwidth product or affected by the overlap of conjugate images. The phase retrieval algorithm serves as an effective tool for QPI dealing with intensity patterns. Traditional phase retrieval algorithms heavily rely on strong support constraints or high data redundancy to accurately reconstruct the sample image. However, in single-frame phase retrieval algorithms, the precise acquisition of support constraints is notably challenging. The multiple-measurement spends much time on data acquisition and is unsuitable for dynamic sample observation. In this paper, we propose a novel, to the best of our knowledge, quantitative phase imaging method that utilizes only two in-line holograms. We have developed a phase retrieval algorithm based on ptychography, which eliminates twin-image and separates illumination background. The proposed method achieves high data utilization efficiency and can be employed for dynamic imaging.

Aerosol optical depth retrieval using scaled digital number (DN) values of multi-spectral satellite and a generating adversarial model based on deep learning application

ABSTRACT The current quantitative retrieval of Aerosol Optical Depth (AOD) typically uses Top-of-atmosphere (TOA) reflectance data obtained by the scale and offset terms of radiometric calibration. Errors can be introduced during the conversion of Digital Number (DN) values to TOA reflectance, restraining the accurate retrieval of AOD. Particularly when surface reflectance is high, conversion errors can significantly distort the retrieval of Aerosol Optical Depth (AOD), given the minimal impact of aerosols on the radiation detected by satellite sensors. To counteract this, we introduce an innovative retrieval algorithm that harnesses a Generative Adversarial Network (GANN), a deep learning (DL) model, to accurately derive AOD from the scaled digital number (DN) values of multi-spectral satellite imagery. The DL technology enables the use of scaled DN values for AOD retrieval, bypassing the conversion errors associated with TOA reflectance since it relies on a sample learning approach instead of radiative transfer calculations. To ensure the number and representativeness of training samples, a total of 37,103 samples from different underlying surfaces from 2014 to 2018 were obtained using a space-time matching strategy. Our K-cross validation demonstrates that employing DN values for AOD retrieval promises to yield higher accuracy compared to using TOA reflectance. Independent 2019 data were used to estimate GANN, MCD19A2 and MOD04_3K aerosol products. Our model showed superior performance compared to the other products in terms of a higher correlation (R = 0.8184) with AERONET AOD and obtaining more reliable retrievals (7601). The sensitivity experiment suggests that GANN exhibits limitations in areas characterized by high aerosol loads and heterogeneity. Our study can give a novel insight into AOD retrieval based on multi-spectral satellite and DL models.

Spectral Calibration of the Spectrometer on Board the Colombian FACSAT-2 Satellite Mission

This paper presents the results of the integration, commissioning, and in-orbit calibration of the ARGUS 2000 SWIR wavelength spectrometer onboard the Colombian FACSAT-2 satellite, Colombia’s first satellite used for the measurement of greenhouse gases (GHG). The satellite has been in orbit for approximately one year, gathering spectral signatures in order to characterize the data and perform calibration. The calibration represents a certain behavior following a second-order adjustment. For data analysis, retrieval algorithms have been developed to obtain synthetic spectra using the Genspect 1.2 software code. These synthetic spectra were obtained from the spectroscopic data associated with atmospheric gases (H2O, O2, CO, and CO2), which are stored in the HITRAN database. Attempting to achieve a more accurate simulation of the experimental spectrum, certain instrumental parameters have been incorporated into the synthetic spectrum, including the resolution of the spectrometer, the field of view (FOV) angle of observation, the limited quantum efficiency of detection, and the slit function. As a result, six slit functions were tested, with the Gaussian and the diffraction functions proving to be the most effective. Finally, a profile of Total Carbon Column Observing Network (TCCON) concentrations was used for comparison with a spectral signature acquired by FACSAT-2, resulting in a close match between the synthetic spectrum and the measured spectrum.

Machine Learning-based Human Resource Management Information Retrieval and Classification Algorithm

Efficient human resource management (HRM) is essential for company achievement in today’s fast-paced corporate world. Businesses must find effective ways to retrieve and categorise the ever-growing amount of HR-related knowledge. This work presents a new method for retrieving and classifying HRM data using machine learning. Modern natural language processing (NLP) and CNN methods are used by the algorithm we developed to handle unorganized human resources (HR) information, including worker records, job postings, and certificates. HR decision-making is facilitated by the system’s ability to derive insightful information from the information using sophisticated text mining and machine learning algorithms.The two main parts of the method are classification and data extraction. HR workers can more easily obtain the required knowledge thanks to information retrieval, which makes it possible to search HR data quickly and accurately. Contrarily, categorisation optimises the division of human resources information into pertinent classifications, including job positions, competencies, and achievement grades. We assess our algorithm’s effectiveness on various datasets from actual HR datasets. The outcomes show how well our strategy works to streamline HRM procedures, cut down on manual labour, and increase the precision of decisions. Furthermore, our technology is compatible with corporate human resources offices and educational settings because it complies with worldwide university requirements.This study belongs to the growing body of knowledge in HRM. It provides a useful tool for businesses looking to improve employee relations, simplify HR procedures, and attract and retain talent. The suggested method is a valuable resource for academics and businesses alike because of its versatility and compliance with global educational norms.

A robust coverless image-synthesized video steganography based on asymmetric structure

Due to the ability of hiding secret information without modifying image content, coverless image stegonagraphy has gained higher level of security and become a research hot spot. However, in existing methods, the issue of image order disruption during network transmission is overlooked. In this paper, the image-synthesized video carrier is proposed for the first time. The selected images which represent secret information are synthesized to a video in order, thus the image order will not be disrupted during transmission and the effective capacity is greatly increased. Additionally, an asymmetric structure is designed to improve the robustness, in which only the receiver utilizes a robust image retrieval algorithm to restore secret information. Specifically, certain images are randomly selected from a public image database to create multiple coverless image datasets (MCIDs), with each image in a CID mapped to hash sequence. Images are indexed based on secret segments and synthesized into videos. After that, the synthesized videos are sent to the receiver. The receiver decodes the video into frames, identifies the corresponding CID of each frame, retrieves original image, and restores the secret information with the same mapping rule. Experimental results indicate that the proposed method outperforms existing methods in terms of capacity, robustness, and security.

Estimating high-resolution snow depth over the North Hemisphere mountains utilizing active microwave backscatter and machine learning

While ground meteorological stations provide accurate snow depth data, their limited spatial coverage results in observational gaps. Satellites offer long-term, large-scale observations, addressing these gaps. Existing snow depth retrieval algorithms mainly use passive microwave remote sensing data with a 25 km resolution, insufficient for capturing snow depth variability in mountainous areas. This paper introduces active microwave backscatter data and machine learning techniques for high-resolution snow depth estimation. We conducted a preliminary exploration of the relationship between Sentinel-1 backscatter coefficient σ0 and snow depth. Due to factors such as vegetation coverage and underlying soil properties, the relationship between σ0 and snow depth is complex and nonlinear. Consequently, six machine learning models were trained to learn this relationship using σ0 and auxiliary data as input features, with in-situ snow depth serving as the target variable. After extensive validation, the Extreme Random Trees (ERT) model was selected for its high accuracy and stability. Using the ERT model, we generated 500 m-resolution snow depth data for northern hemisphere mountains, then analyzed temporal snow depth variations and altitudinal stratification.

Assessment and Validation of Land Surface Temperature Retrieval Algorithms Using Landsat 8 TIRS Data in Antarctic Ice-Free Areas

This study evaluates the effectiveness of different Land Surface Temperature (LST) retrieval algorithms applied to Landsat 8 Thermal Infrared Sensor (TIRS) data in the ice-free regions of the Antarctic Peninsula. The primary objective is to determine the most accurate algorithm for LST estimation in these environments. Three algorithms, namely radiative transfer equation (RTE), single channel (SC), and mono window (MW), were utilised and compared to in-situ measurements at two locations in the northern part of James Ross Island (JRI), Antarctic Peninsula. The study considered various factors influencing LST accuracy, including land surface emissivity, atmospheric conditions, and sun elevation angles. The findings reveal that all three algorithms demonstrate significant sensitivity to emissivity. The MW algorithm emerged as the most suitable, showing the lowest root mean square error (RMSE) of 3.06 °C, followed by the SC and RTE algorithms with RMSE values of 3.68 and 3.98 °C, respectively. The study also underscores a strong positive correlation between LST retrieval accuracy and sun elevation angle, with more accurate results obtained from satellite images acquired in February, characterised by lower sun elevation angles. No significant relationship with water vapour content in the atmosphere was identified during the investigated period.