Electrooxidation Of Alcohols Research Articles

NHPI-Catalyzed Electro-Oxidation of Alcohols to Aldehydes and Ketones.

A practical and recyclable electro-oxidation of alcohols to aldehydes and ketones by using N-hydroxyphthalimide (NHPI) as the catalyst is presented. Through an undivided pool, under constant current conditions, various alcohols can be oxidized to the corresponding aldehydes or ketones in a high yield. Compared with previous methods, this system has the following characteristics: (1) the catalyst, electrode, electrolyte, and solvent (mainly water) are recyclable; (2) it has many advantages such as mild reaction conditions, easy operation, and good tolerance of functional groups; and (3) it can be smoothly scaled up to kilogram-scale production.

Three-component NiO/Fe3O4/rGO nanostructure as an electrode material towards supercapacitor and alcohol electrooxidation

A nanocomposite made of nickel oxide and iron oxide (NiO/Fe3O4) and its hybrid with reduced graphene oxide (rGO) as a conductive substrate with a highly functional surface (NiO/Fe3O4/rGO) was synthesized using a simple hydrothermal approach. This study addresses the challenge of developing efficient materials for energy storage and alcohol fuel cells. After confirming the synthesis through structural analysis, the potential of these nanocomposites as supercapacitor electrodes and catalysts for methanol and ethanol oxidation in alcohol fuel cells were evaluated. The synergy of combining the two metal oxides and adding rGO to the composite structure led to excellent electrocatalytic activity in alcohol oxidation. For the modified NiO/Fe3O4/rGO electrode in the methanol oxidation reaction (MOR), a current density of 450 mA/cm2 at 0.67 V and excellent catalyst stability of 98.7% over 20 hours in chronoamperometric analysis were observed. In the ethanol oxidation reaction (EOR), an oxidative current of 235 mA/cm2 at a peak potential of 0.76 V was seen, with catalyst stability of 96.4% after 20 hours. As a supercapacitor electrode, the NiO/Fe3O4 composite demonstrated a specific capacitance of 946 F/g, while NiO/Fe3O4/rGO showed 1155 F/g. The stability of these electrodes after 10000 GCD cycles was 83.6% and 90.6%, respectively. These findings suggest that the proposed structures are cost-effective and reliable alternatives for energy storage and production, suitable for alcohol fuel cells and supercapacitors.

One-pot synthesis of 2D-Ni-MOF from waste PET plastic in aqueous medium for selective electrooxidation of glycerol, ethanol, and methanol

This study investigates the electrochemical performance and selectivity of a nickel-based metal-organic framework (Ni-MOF) catalyst synthesized from waste PET plastic using a one-pot approach in aqueous media. The Ni-MOF electrode was evaluated for glycerol electrooxidation reaction (GEOR), ethanol electrooxidation reaction (EEOR), and methanol electrooxidation reaction (MEOR). Linear sweep voltammetry (LSV) revealed current densities of 30mA/cm² at 0.5639V for GEOR, 50.07mA/cm² at 0.35V for EEOR, and 45.73mA/cm² at 0.39V for MEOR, indicating superior catalytic activity. Nyquist plots showed lower charge transfer resistance (Rct) values of 11.0 Ω for GEOR, 2.79 Ω for EEOR, and 2.69 Ω for MEOR, confirming efficient electron transfer. Bode impedance plots demonstrated lower impedance for alcohol electrooxidation compared to oxygen evolution reaction (OER). Chronoamperometry (CA) tests indicated excellent stability with 75.72% glycerol conversion for GEOR and selectivities of 94% for glyceric acid, 65.59% for acetic acid in EEOR, and 70.54% for formic acid in MEOR. These results highlight the potential of Ni-MOF derived from recycled PET plastic for sustainable and efficient electrooxidation of C1-C3 alcohols.

Anode-Electrolyte Interfacial Acidity Regulation Enhances Electrocatalytic Performances of Alcohol Oxidations.

The local acidity at the anode surface during electrolysis is apparently stronger than that in bulk electrolyte due to the deprotonation from the reactant, which leads to the deteriorated electrocatalytic performances and product distributions. Here, an anode-electrolyte interfacial acidity regulation strategy has been proposed to inhibit local acidification at the surface of anode and enhance the electrocatalytic activity and selectivity of anodic reactions. As a proof of the concept, CeO2-x Lewis acid component has been employed as a supporter to load Au nanoparticles to accelerate the diffusion and enrichment of OH- toward the anode surface, so as to accelerate the electrocatalytic alcohol oxidation reaction. As the result, Au/CeO2-x exhibits much enhanced lactic acid selectivity of 81 % and electrochemical activity of 693 mA⋅cm-2 current density in glycerol oxidation reaction compared to pure Au. Mechanism investigation reveals that the introduced Lewis acid promotes the mass transport and concentration of OH- on the anode surface, thus promoting the generation of lactic acid through the simultaneous enhancements of Faradaic and non-Faradaic processes. Attractively, the proposed strategy can be used for the electro-oxidation performance enhancements of a variety of alcohols, which thereby provides a new perspective for efficient alcohol electro-oxidations and the corresponding electrocatalyst design.

Electrodeposited Pt nanoparticles loaded on support composites of metal-organic frameworks and carbon quantum dots for the enhancement of alcohol electrooxidation

Metal-organic frameworks comprising divalent metal (M)-linked 4,4′-bipyridine (bpy), {[CuII4(bpy)3(OH)2(mal)3]·4H2O}n(Cubpy) and Ni2(bpy)3(NO3)4(H2O)4(Nibpy) were modified with carbon quantum dots (Mbpy/CQD; M = Cu, Ni) to prepare a composite support. Then, platinum (Pt) nanoparticles were electrodeposited onto the modified Mbpy/CQD support for the preparation of Pt-based catalysts (Pt/Mbpy/CQD) for the electrocatalytic improvement of alcohol oxidation. The influence of Mbpy with electrodeposited Pt nanostructures on CQD support electrodes is particularly discussed in detail through numerous physical characterizations, e.g., SEM, TEM, EDX, XPS, XRD, and elemental mapping. Dispersed Pt nanoparticles with diameters of 3-10 nm can be obtained on the modified Mbpy/CQD supports with suitable chemical and structural conditions for electrocatalytic oxidation improvement. The various prepared Pt/Mbpy/CQD catalysts with different compositions also enhance the kinetics of alcohol oxidation; they have a greater electrochemically active surface area (ECSA) and more development activity for alcohol oxidation than do the Pt/CQD catalysts. For the oxidation of all the selected small alcohol molecules, e.g., methanol, ethanol and isopropanol, the Pt/Cubpy/CQD catalyst composites also mostly exhibited improved catalytic activity, outstanding stability, and lower onset potential (Eonset) and CO tolerance. The favorable performance of the prepared composite catalysts is attributed to their superior ECSA owing to the suitable mixed surface of metal and functional groups of electrodeposited Pt, Mbpy, and CQD on the catalytic composites. Consequently, these as-prepared Pt/Mbpy/CQD composites, which are promising oxidative heterogeneous catalysts, can be used as active and stable catalysts for alcohol oxidation in alkaline solutions.

CoFe bimetallic phosphide fabricated by topological transformation strategy for efficient electrooxidation of benzyl alcohol

Rational design of effective non-precious metallic electrocatalysts is crucial for electrooxidation of benzyl alcohol (BA) producing benzoic acid (BAC). Herein, CoFe bimetallic phosphide (CoFeP-m) with bimetallic synergy, fully exposed active sites, and fast charge transfer was fabricated by topological transformation of CoFe-LDH for the efficient electrooxidation of BA to BAC under mild condition. Under the optimal conditions of starting voltage of 0.7 V vs. Ag/AgCl at 25oC, CoFeP-300 achieved 97.71% transformation of BA and 97.84% BAC's selectivity for 8 h. In addition, CoFeP-300 showed excellent stability which maintained 95.89% transform into BA and 95.37% BAC's selectivity at the sixth cycle.

Nitrogen-Tungsten Oxide Nanostructures on Nickel Foam as High Efficient Electrocatalysts for Benzyl Alcohol Oxidation.

Electrocatalytic alcohol oxidation (EAO) is an attractive alternative to the sluggish oxygen evolution reaction in electrochemical hydrogen evolution cells. However, the development of high-performance bifunctional electrocatalysts is a major challenge. Herein, we developed a nitrogen-doped bimetallic oxide electrocatalyst (WO-N/NF) by a one-step hydrothermal method for the selective electrooxidation of benzyl alcohol to benzoic acid in alkaline electrolytes. The WO-N/NF electrode features block-shaped particles on a rough, inhomogeneous surface with cracks and lumpy nodules, increasing active sites and enhancing electrolyte diffusion. The electrode demonstrates exceptional activity, stability, and selectivity, achieving efficient benzoic acid production while reducing the electrolysis voltage. A low onset potential of 1.38 V (vs. RHE) is achieved to reach a current density of 100 mA cm-2 in 1.0 M KOH electrolyte with only 0.2 mmol of metal precursors, which is 396 mV lower than that of water oxidation. The analysis reveals a yield, conversion, and selectivity of 98.41%, 99.66%, and 99.74%, respectively, with a Faradaic efficiency of 98.77%. This work provides insight into the rational design of a highly active and selective catalyst for electrocatalytic alcohol oxidation.

Solvothermal synthesis of PdCu nanorings with high catalytic performance for alcohol electrooxidation

Two-dimensional (2D) Pd-based nanostructures with a high active surface area and a large number of active sites are commonly used in alcohol oxidation research, whereas the less explored ring structure made of nanosheets with large pores is of interest. In this study, we detail the fabrication of PdCu nanorings (NRs) featuring hollow interiors and low coordinated sites using a straightforward solvothermal approach. Due to increased exposure of active sites and the synergistic effects of bimetallics, the PdCu NRs exhibited superior catalytic performance in both the ethanol oxidation reaction (EOR) and the ethylene glycol oxidation reaction (EGOR). The mass activities of PdCu NRs for EOR and EGOR were measured at 7.05 A/mg and 8.12 A/mg, respectively, surpassing those of commercial Pd/C. Furthermore, the PdCu NRs demonstrated enhanced catalytic stability, maintaining higher mass activity levels compared to other catalysts during stability testing. This research offers valuable insights for the development of efficient catalysts for alcohol oxidation.

Inhibiting the Deep Reconstruction of Ni‐Based Interface by Coordination of Chalcogen Anions for Efficient and Stable Glycerol Electrooxidation

AbstractRecently, Ni‐based chalcogenides havedemonstrated remarkable activity and selectivity for alcohol electrooxidation, but the mechanisms remain debated. This study synthesizes Ni‐based electrodeswith different chalcogen anion coordination on nickel nanorod arrays (NiOx/Ni,NiSx/Ni, and NiSex/Ni NRAs). NiSex/Ni NRAsshowcases superior performance (Faradaic efficiency 92.9%) in glycerolelectrooxidation reaction (GOR). In situ spectroscopy reveals that NiSecoordination inhibits deep oxidative reconstruction of the Ni‐based interface, preventingNiOOH phase formation during GOR, enhancing activity and stability of NiSex/NiNRAs. Conversely, NiS and NiO coordination lead to deep reconstruction with NiOOHphase formation, limiting GOR performance. Differently, during competingreaction of GOR, the oxygen evolution reaction (OER) leads to deepreconstruction of NiSex interface due to the instability of Ni‐Sebonds, inducing performance degradation and dissolution of Se components. Furthermechanism investigation elucidates that the rate‐determining step (RDS) ofGOR at the NiSex interface involves oxidation of *C2H3O3 intermediatesthrough H2O adsorption, favoring stable formate production.Contrarily, the RDS at the NiSx, NiOx, and NiOOHinterfaces predominantly focus on the decarboxylation of multi‐carbon intermediates, raisingenergy barriers and over‐oxidizing formate to CO2. These results providenew insights for designing Ni‐based non‐oxide catalysts forefficient and stable electrocatalytic oxidation.

Oxygenate-induced structural evolution of high-entropy electrocatalysts for multifunctional alcohol electrooxidation integrated with hydrogen production

High-entropy compounds have been emerging as promising candidates for electrolysis, yet their controllable electrosynthesis strategy remains a formidable challenge because of the ambiguous ionic interaction and codeposition mechanism. Herein, we report a oxygenates directionally induced electrodeposition strategy to construct high-entropy materials with amorphous features, on which the structural evolution from high-entropy phosphide to oxide is confirmed by introducing vanadate, thus realizing the simultaneous optimization of composition and structure. The representative P-CoNiMnWVOx shows excellent bifunctional catalytic performance toward alkaline hydrogen evolution reaction and ethanol oxidation reaction (EOR), with small potentials of -168 mV and 1.38 V at 100 mA cm-2, respectively. In situ spectroscopy illustrates that the electrochemical reconstruction of P-CoNiMnWVOx induces abundant Co-O species as the main catalytic active species for EOR and follows the conversion pathway of the C2 product. Theoretical calculations reveal the optimized electronic structure and adsorption free energy of reaction intermediates on P-CoNiMnWVOx, thereby resulting in a facilitated kinetic process. A membrane-free electrolyzer delivers both high Faradaic efficiencies of acetate and H2 over 95% and superior stability at100 mA cm-2 during 120 h electrolysis. In addition, the unique composition and structural advantages endow P-CoNiMnWVOx with multifunctional catalytic activity and realize multipathway electrosynthesis of formate-coupled hydrogen production.

Graphitic Carbon Nitride as a Promising Visible-Light-Activated Support Boosting Platinum Nanoparticle Activity in Ethanol Electrooxidation.

In the present work, exfoliated graphitic carbon nitride (g-CN) is immobilized on carbon paper substrates by a simple electrophoretic route, and subsequently decorated with ultra-low amounts (≈μg/cm2) of Pt nanoparticles (NPs) by cold plasma sputtering. Optimization of preparative conditions allowed a fine tuning of Pt NPs size, loading and distribution and thus a controlled tailoring of g-CN/Pt interfacial interactions. Modulation of such features yielded g-CN-Pt-based anode materials with appealing activity and stability towards the ethanol oxidation reaction (EOR) in alkaline aqueous solutions, as revealed by electrochemical tests both in the dark and under irradiation. The present results provide new insights on the design of nano-engineered heterocomposites featuring improved performances thanks to Pt coupling with g-CN, a low-cost and environmentally friendly visible light-active semiconductor. Overall, this work might open attractive avenues for the generation of green hydrogen via aqueous ethanol electrolysis and the photo-promoted alcohol electrooxidation in fuel cells.

Electrooxidation of ethylene glycol using Ag-Pt nanotubes supported on silica: Correlating the unexpected O-vacancies creation with catalytic performance

Electrooxidation of small organic compounds is crucial in achieving clean and efficient energy production. In this context, ethylene glycol (EG) has attracted considerable interest due to its notable energy density, which is suitable for applications in direct alcohol fuel cells. In light of this, we prepared Ag-Pt nanotubes (Ag-PtNTs) supported on silica (SiO2) for the electrooxidation of this alcohol. However, our goal was not only to create an electrocatalyst that enhances electrooxidation efficiency but also to explore the interaction between the SiO2 and the nanotubes. Such an exploration aims to contest the prevailing perception of SiO2 as an inert and non-conductive material. Thus, comprehensive physicochemical characterization of the electrocatalyst was conducted, supported by density functional tight-binding (DFTB) calculations, to elucidate the correlation between composition, electronic effects, and catalytic performance, showing that Ag interacts more with the oxygen of SiO2 that Pt. The interaction between SiO2 and Ag-Pt NTs was explored through Mott-Schottky (M-S) analysis and electron paramagnetic resonance (EPR) spectroscopy, revealing the creation of oxygen vacancies (o-vacancies) and heterojunction formation, which enhance charge transfer and catalytic activity, both supported by theoretical calculations. In addition, mechanistic insights into the electrooxidation process were obtained through potential energy surface (PES) assessments, revealing a concerted pathway for glycolaldehyde formation with low barrier energy and favorable thermodynamics. Finally, the synthesized Ag-PtNTs/Si electrocatalyst exhibited an onset potential/current density of 0.45 V/0.09 mV mA cm−2 at 25 °C, demonstrating efficient electrooxidation capabilities. Therefore, this study provides valuable insights into designing efficient and stable electrocatalysts for alcohol electrooxidation, contributing to improving cleaner energy technologies.

ZnO nanorods on POPD/GCN/TCFP with ternary synergy for promoting electro-oxidation of furfuryl alcohol

In this work, Poly(o-phenylenediamine) (POPD) and zinc oxide (ZnO) nanoparticles were electrochemically deposited on GCN (graphitic carbon nitride) coated TCFP (Toray carbon fiber paper) electrode. The modified electrode ZnO-POPD-GCN-TCFP was assessed by Field emission scanning electron microscopy (FESEM), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS) studies. The electrochemical studies were carried out via cyclic voltammetry (CV) and electrochemical impedance spectroscopic (EIS) methods. The developed electrode was employed for the oxidation of furfuryl alcohol (FA) using 4-ACT (4-acetamido TEMPO) as a mediator in an alkaline medium via bulk electrolysis. Proton nuclear magnetic resonance (1H NMR) spectroscopy was used to characterize the final product. The oxidation of FA to furfural was accelerated by the heterogeneous catalyst ZnO-POPD-GCN-TCFP electrode owing to its good electrocatalytic activity and stability. Hence, a sustainable electrochemical method for synthesizing furfural, with significance in the realm of green chemistry, was developed. The Electro-oxidation of FA offers a clean alternative to traditional methods utilizing electricity, potentially from renewable sources, to drive the reaction, reducing reliance on harsh chemicals and minimizing environmental impact. By adjusting parameters like electrode potential and electrolyte composition, it is possible to optimize the reaction conditions for furfural production with optimal yield, which has several applications in daily life.

Tuning Crystal Phase of Palladium-Selenium Nanowires for Enhanced Ethylene Glycol Electrocatalytic Oxidation.

Alcohol electrooxidation is pivotal for a sustainable energy economy. However, designing efficient electrocatalysts for this process is still a formidable challenge. Herein, palladium-selenium nanowires featuring distinct crystal phases: monoclinic Pd7Se2 and tetragonal Pd4.5Se for ethylene glycol electrooxidation reaction (EGOR) are synthesized. Notably, the supported monoclinic Pd7Se2 nanowires (m-Pd7Se2 NWs/C) exhibit superior EGOR activity, achieving a mass activity (MA) and specific activity (SA) of 10.4 A mgPd -1 (18.7mA cm-2), which are 8.0 (6.7) and 10.4 (8.2) times versus the tetragonal Pd4.5Se and commercial Pd/C and surpass those reported in the literature. Furthermore, m-Pd7Se2 NWs/C displays robust catalytic activity for other alcohol electrooxidation. Comprehensive characterization and density functional theory (DFT) calculations reveal that the enhanced electrocatalytic performance is attributed to the increased formation of Pd0 on the high-index facets of the m-Pd7Se2 NWs, which lowers the energy barriers for the C─C bond dissociation in CHOHCHOH* and the CO* oxidation to CO2*. This study provides palladium-based alloy electrocatalysts exhibiting the highest mass activity reported to date for the electrooxidation of ethylene glycol, achieved through the crystalline phase engineering strategy.

Structural evolution in S-vacancy-rich Co@Co9S8 during selective benzyl alcohol electrooxidation reaction

Electrooxidation of organics using electrons as oxidants is a clean approach to produce commodity chemicals. However, designing an electrocatalyst with superior performance at low cell voltage remains a challenge. In this study, a series of VS-Co@Co9S8 electrocatalysts were fabricated by thermal reduction method using MOFs as templates. The catalytic oxidation performance and reaction mechanism of such specimens for benzyl alcohol were comprehensively analyzed by electrochemical measurement method and ex-situ structure characterization. The results show that Co@Co9S8-30 M has a unique three-dimensional (3D) micro cubic structure with abundant S vacancy (VS). These features accelerate the electrons and substrate transfer as well as provide plentiful active sites for benzyl alcohol electrooxidation reaction (BAOR). Consequently, the Co@Co9S8-30 M presented outstanding catalytic activity. The overpotential of 10 mA cm−2 (η10) was only 265.4 mV for BAOR. The conversion rate and benzoic acid selectivity were achieved to 72% and 90%, respectively. Particularly, the formation rate of benzoic acid was 7.247 mmol·gcat.−1·h−1. Moreover, the Co@Co9S8-30 M exhibited superior durability over 135 h. The coordination number of octahedral metal sites in Co9S8 did not match the number of Co 3 d orbital electrons, resulting in the weakening of bonding strength between Co and S elements. Thus, the Co@Co9S8 was reconstructed to Co3O4@CoOOH. Based on this assessment, the Co3O4@CoOOH was the active site of BAOR. This work provides theoretical guidance for the design of Co-based catalysts.

Explosive Leidenfrost-Droplet-Mediated Synthesis of Monodispersed High-Entropy-Alloy Nanoparticles for Electrocatalysis.

High-entropy-alloy nanoparticles (HEA NPs) exhibit promising potential in various catalytic applications, yet a robust synthesis strategy has been elusive. Here, we introduce a straightforward and universal method, involving the microexplosion of Leidenfrost droplets housing carbon black and metal salt precursors, to fabricate PtRhPdIrRu HEA NPs with a size of ∼2.3 nm. The accumulated pressure within the Leidenfrost droplet triggers an intense explosion within milliseconds, propelling the carbon support and metal salt rapidly into the hot solvent through explosive force. The exceptionally quick temperature rise ensures the coreduction of metal salts, and the dilute local concentration of metal ions limits the final size of the HEA NPs. Additionally, the explosion process can be fine-tuned by selecting different solvents, enabling the harvesting of diverse HEA NPs with superior electrocatalytic activity for alcohol electrooxidation and hydrogen electrocatalysis compared to commercial Pt (Pd) unitary catalysts.

Steering benzyl alcohol electrooxidation coupled with hydrogen evolution via hetero‐interface construction

AbstractIt is still a challenge to develop electrocatalyst for the efficient adsorption and conversion of organic molecule in aqueous media. Herein, a hetero‐interface structure based on CuO@Ni(OH)2 is rationally designed to enhance the performance of benzyl alcohol oxidation to benzoic acid. A high Faradaic efficiency of 99% and the yield of 3.09 mmol cm−2 h−1 are achieved at 1.70 V versus reversible hydrogen electrode, outperforming the previously reported electrocatalysts. Furthermore, a membrane‐free flow electrolyzer was assembled based on CuO@Ni(OH)2 hetero‐interface, exhibiting a much high yielding of benzoic acid (6.73 mmol cm−2 h−1) and hydrogen (0.35 L cm−2 h−1) with excellent stability. Both experimental data and density functional theory calculations verify that the electron is tend to accumulate at the hetero‐interface, thus accelerating the adsorption of reactant and intermediate and reducing the energy barrier of the conversion of benzyl alcohol to benzoic acid.

Lamellar polyaniline-modified reduced graphene oxide loaded electron-rich Pd nanoparticles for highly efficient electrooxidation of C2 alcohols

Design and preparation of catalysts with lower cost and higher catalytic efficiency are still important strategy to promote the wide application of alkaline direct alcohol fuel cells (ADAFCs). In this study, a novel anode catalyst for ADAFCs has been easily synthesized based on polyaniline (PANI)-modified wrinkled reduced graphene oxide (rGO) and Pd nanoparticles (Pd NPs). Morphology and structure characterization confirm the modified lamellar structure and composition of the Pd/PANI-rGO composite, and X-ray photoelectron spectroscopy (XPS) demonstrates the electron transfer from PANI-rGO to Pd NPs. For ethylene glycol and ethanol oxidation reactions (EGOR/EOR) in alkaline media, the Pd/PANI-rGO exhibits promising electrocatalytic properties with mass activity as 4342.5 and 2220.4 mA mgPd-1, specific activity as 26.6 and 13.6 mA cm-2 and intrinsic activity as 5.7 and 2.5 s-1, respectively. Moreover, the Pd/PANI-rGO shows significantly enhanced anti-poisoning ability and durability as compared with contrast samples due to the well dispersion of Pd NPs on PANI-rGO and the synergistic interaction between PANI-rGO and Pd NPs producing electron-rich Pd and more active sites for EGOR and EOR. This work is expected to provide theoretical foundation for designing low-cost and high-efficiency ADAFCs anode catalysts.

Electrochemical oxidation of concentrated benzyl alcohol to high-purity benzaldehyde via superwetting organic-solid-water interfaces.

Organic electrosynthesis in aqueous media is presently hampered by the poor solubility of many organic reactants and thus low purity of liquid products in electrolytes. Using the electrooxidation of benzyl alcohol (BA) as a model reaction, we present a "sandwich-type" organic-solid-water (OSW) system, consisting of BA organic phase, KOH aqueous electrolyte, and porous anodes with Janus-like superwettability. The system allows independent diffusion of BA molecules from the organic phase to electrocatalytic active sites, enabling efficient electrooxidation of high-concentration BA to benzaldehyde (97% Faradaic efficiency at ~180 mA cm-2) with substantially reduced ohmic loss compared to conventional solid-liquid systems. The confined organic-water boundary within the electrode channels suppresses the interdiffusion of molecules and ions into the counterphase, thus preventing the hydration and overoxidation of benzaldehyde during long-term electrocatalysis. As a result, the direct production of high-purity benzaldehyde (91.7%) is achieved in a flow cell, showcasing the effectiveness of electrocatalysis over OSW interfaces for the one-step synthesis of high-purity organic compounds.

Regulation of Catalyst Immediate Environment Enables Acidic Electrochemical Benzyl Alcohol Oxidation to Benzaldehyde.

Electrocatalytic alcohol oxidation in acid offers a promising alternative to the kinetically sluggish water oxidation reaction toward low-energy H2 generation. However, electrocatalysts driving active and selective acidic alcohol electrochemical transformation are still scarce. In this work, we demonstrate efficient alcohol-to-aldehyde conversion achieved by reticular chemistry-based modification of the catalyst's immediate environment. Specifically, coating a Bi-based electrocatalyst with a thin layer of metal-organic framework (MOF) substantially improves its performance toward benzyl alcohol electro-oxidation to benzaldehyde in a 0.1 M H2SO4 electrolyte. Detailed analysis reveals that the MOF adlayer influences catalysis by increasing the reactivity of surface hydroxides as well as weakening the catalyst-benzaldehyde binding strength. In turn, low-potential (0.65 V) cathodic H2 evolution was obtained through coupling it with anodic benzyl alcohol electro-oxidation. Consequently, the presented approach could be implemented in a wide range of electrocatalytic oxidation reactions for energy-conversion application.