Ag Pseudo-reference Electrode Research Articles

Magnetic dispersive solid-phase extraction using a zeolite-based composite for direct electrochemical determination of lead(II) in urine using screen-printed electrodes.

Magnetic dispersive solid-phase extraction (MDSPE) is combined with electrochemical detection by using a screen-printed carbon electrode modified with gold nanoparticles to determine lead(II). A zeolite-based magnetic composite was used as sorbent during sample preparation, thus combining the unique properties of zeolites as sorbent materials with the remarkable advantages provided by magnetic materials. Three different zeolite-based magnetic composites were initially investigated and characterized. ZSM-5/Fe2O3 treated with HNO3 (ZSM-5/Fe2O3(tr)) was finally selected as sorbent. Lead was extracted from urine samples using ZSM-5/Fe2O3(tr). After extraction, the phases were separated by using an external magnet. Subsequently, the magnetic composite carrying the analyte was directly deposited onto the working electrode of a modified screen-printed carbon electrode for final electrochemical detection. Thereby, the elution and detection of Pb(II) were carried out in a single step. A multivariate approach was employed to optimize the experimental parameters affecting extraction. Under optimized conditions and at a typical working potential of -0.23V (vs. Ag pseudo-reference electrode), response is linear in the 0 to 25μgL-1 Pb(II) concentration range. The empirical limit of detection ranged from 1.0 to 2.0μgL-1. The method was used to analyze Pb(II)-spiked urine samples, and apparent recoveries ranged between 99 and 107%, with coefficients of variation of <20%. Graphical abstractSchematic presentation of the analytical method to determine lead(II) in urine samples. Magnetic dispersive solid-phase extraction using a zeolite-based composite (ZSM-5/Fe2O3(tr)) is directly combined with electrochemical detection by using a screen-printed carbon electrode modified with gold nanoparticles (SPCnAuE).

A novel zinc finger protein-based amperometric biosensor for miRNA determination.

This paper reports a simple electrochemical strategy for the determination of microRNAs (miRNAs) using a commercial His-Tag-Zinc finger protein (His-Tag-ZFP) that binds preferably (but non-sequence specifically) RNA hybrids over ssRNAs, ssDNAs, and dsDNAs. The strategy involves the use of magnetic beads (His-Tag-Isolation-MBs) as solid support to capture the conjugate formed in homogenous solution between His-Tag-ZFP and the dsRNA homohybrid formed between the target miRNA (miR-21 selected as a model) and a biotinylated synthetic complementary RNA detector probe (b-RNA-Dp) further conjugated with a streptavidin-horseradish peroxidase (Strep-HRP) conjugate. The electrochemical detection is carried out by amperometry at disposable screen-printed carbon electrodes (SPCEs) (- 0.20 V vs Ag pseudo-reference electrode) upon magnetic capture of the resultant magnetic bioconjugates and H2O2 addition in the presence of hydroquinone (HQ). The as-prepared biosensor exhibits a dynamic concentration range from 3.0 to 100 nM and a detection limit (LOD) of 0.91 nM for miR-21 in just ~ 2 h. An acceptable discrimination was achieved between the target miRNA and other non-target nucleic acids (ssDNA, dsDNA, ssRNA, DNA-RNA, miR-122, miR-205, and single central- or terminal-base mismatched sequences). The biosensor was applied to the analysis of miR-21 from total RNA (RNAt) extracted from epithelial non-tumorigenic and adenocarcinoma breast cells without target amplification, pre-concentration, or reverse transcription steps. The versatility of the methodology due to the ZFP's non-sequence-specific binding behavior makes it easily extendable to determine any target RNA only by modifying the biotinylated detector probe.

Enhanced determination of fertility hormones in saliva at disposable immunosensing platforms using a custom designed field-portable dual potentiostat

This work describes a new electroanalytical device for the simultaneous and reliable determination of two fertility relevant hormones (luteinizing hormone, LH, and progesterone, P4) in saliva. The device is constructed using a custom designed and field-portable potentiostat where dual disposable immunosensing platform are connected. The immunosensors are based on sandwich-type and competitive immunoassays implemented onto magnetic microbeads (MBs) functionalized with Neutravidin and Protein G for the determination of LH and P4, respectively. Amperometric detection performed at −0.20 V vs the Ag pseudo-reference electrode using the H2O2/hydroquinone (HQ) system was employed as the transduction technique after placing the MBs with immunocomplexes for each target hormone on the appropriate working electrode of screen-printed dual carbon electrodes (SPdCEs). The method exhibits high sensitivity and selectivity for the target hormones providing detection limits of 1.7 pg mL−1 and 0.10 mIU mL−1 for P4 and LH, respectively, with a 1 h test time. The applicability of the method was confirmed by determining both hormones in saliva samples from different volunteers providing results comparable to those obtained using amperometric transduction with a commercial potentiostat and with ELISA methodologies involving the same immunoreagents for each target hormone.

Electropolishing of aluminium in a deep eutectic solvent

The electropolishing of aluminium in Ethaline, a eutectic mixture of choline chloride and ethylene glycol, is investigated in this work. Electrochemical polishing is performed at electrode potentials of 1, 1.5, 2, 4 and 6 V vs. Ag pseudo-reference electrode at the temperature of 20 °C. The current efficiency of aluminium dissolution is ca. 100%. The dissolution rate grows with increasing electrode potential and is about 1–4 nm s−1. No anodization of aluminium was observed. The electropolishing of aluminium yields leveling of surface morphology and disappearance of surface defects. An increase in the electrode potential at which anodic treatment was performed results in a decrease in roughness coefficient and improvement of surface appearance (the surface becomes much brighter). The leveling of the surface profile causes an increase in microhardness, corrosion resistance and surface hydrophobicity of aluminium. Thus, deep eutectic solvent can be considered as a promising medium to perform electropolishing of aluminium.

Electrochemical tropomyosin allergen immunosensor for complex food matrix analysis

A shrimp tropomyosin (TPM) immunosensor has been developed and optimized to detect trace amounts of shrimp (in the ppm range), based on a combination of an amperometric transduction, magnetic particles and disposable screen-printed electrodes. The approach is based on the implementation of a sandwich immunoassay format on the surface of magnetic beads and their coupling onto disposable screen-printed electrodes to finally register the amperometric response at −200 mV vs. Ag pseudo-reference electrode, using H2O2 as enzymatic substrate and hydroquinone as redox mediator. The use of carboxyl-functionalized magnetic microbeads (MBs) and in-house made magnetic nanoparticles (MNPs) as solid supports have been evaluated and compared. Our experimental results confirm that the use of MBs, in addition to simplifying the test protocol, improves the resulting sensitivity, so they were selected for the implementation of the immunosensor. In the optimized experimental conditions, the developed immunosensor offered a LOD of 47 pg mL−1 for amperometric determination of shrimp TPM standards and great selectivity against TPM from other sources, thus allowing differentiation between crustaceans (shrimp) and mollusks (squid). Applicability studies demonstrated successful determination both in crude and cooked samples using very simple protocols. Additionally, processed foods based on fish and mollusks that could potentially include crustaceans in their composition have been analyzed using the sensor and compared to the declared ingredients.The sensitivity and specificity showed by the sensor in the analysis of heterogeneous food samples without a previous purification or enrichment stage, also outperforms existing solutions in terms of time and cost effectiveness and permits its direct and smooth implementation in the food industry for routine allergen analyses.

Simultaneous amperometric immunosensing of the metastasis-related biomarkers IL-13Rα2 and CDH-17 by using grafted screen-printed electrodes and a composite prepared from quantum dots and carbon nanotubes for signal amplification.

This paper describes a dual electrochemical immunoassay for the simultaneous determination of IL-13Rα2 and CDH-17, two biomarkers of emerging relevance in metastatic processes. The sandwich assay uses a screen-printed dual carbon electrode that was electrochemically grafted with p-aminobenzoic acid to allow the covalent immobilization of capture antibodies. A hybrid composed of graphene quantum dots (GQDs) and multiwalled carbon nanotubes (MWCNTs) act as nanocarriers for the detection antibodies and horseradish peroxidase. The use of this hybrid material considerably improves the assay (in comparison to the use of MWCNTs) due to the peroxidase mimicking activity of the GQDs. The method works at a low working potential (0.20V vs. Ag pseudo-reference electrode) and thus is not readily interfered by unknown electroactive species. The dual immunoassay allows for the selective determination of both biomarkers with LOD values of 1.4 (IL-13sRα2) and 0.03ngmL-1 (CDH-17). The simultaneous determination of IL-13Rα2 and CDH-17 was accomplished in lysates from breast and colorectal cancer cells with different metastatic potential, and in paraffin-embedded tumor tissues extracts from patients diagnosed with colorectal cancer at different stages. The applicability to discriminate the metastatic potential even in intact cells through the detection of both extracellular receptors has been demonstrated also. The assay can be performed within 3h, requires small sample amounts (0.5μg), and has a simple protocol. Graphical abstract Dual amperometric immunosensing of the metastasis-related biomarkers IL-13Rα2 and CDH-17 in human colorectal cancer cells and tissues by using grafted screen-printed electrodes and composites of quantum dots and carbon nanotubes as nanocarriers.

Screen-printed electrode as a cost-effective and miniaturized analytical tool for corrosion monitoring of reinforced concrete

Herein, we report the first electrochemical sensor based on a screen-printed electrode designed to evaluate the corrosion level in iron-reinforced concrete specimens. The combination of an Ag pseudoreference electrode with a gel polymeric electrolyte allows for fast, stable and cost-effective potentiometric measurements, suitable for evaluating the corrosion of iron bars embedded in concrete samples. The sensor was found to be capable of discriminating between a standard non-corroded sample and samples subject to corrosion due to the presence of chloride or carbonate in the concrete matrix. The potential in concrete-based specimens containing carbonate (pH 9, −0.35 ± 0.03 V) or chloride (4% w/w, −0.52 ± 0.01 V) was found to be more negative than in a standard concrete-based sample (−0.251 ± 0.003 V), in agreement with the ASTM standard C876 method which uses a classical Cu/CuSO4 solid reference electrode. Our results demonstrate that a printed Ag pseudoreference electrode combined with KCl agar provides an efficient and reliable electrochemical system for evaluating the corrosion of iron bars embedded in concrete-based structures.

Electrochemical immunoassay for lactalbumin based on the use of ferrocene-modified gold nanoparticles and lysozyme-modified magnetic beads.

The authors describe a method for electrochemical determination of the breast cancer biomarker α-lactalbumin (α-LA) using disposable screen-printed carbon electrodes (SPCEs). Lysozyme-conjugated Fe3O4 nanoparticles (Lys-Fe3O4NPs) were used to capture α-LA on the surface of the SPCEs which then is trapped in an immunosandwich using secondary antibodies labeled with ferrocene-modified gold nanoparticles. The amperometric response of ferrocene (recorded at +0.1V vs. silver pseudo-reference electrode) as well as the electrocatalytic activity of gold nanoparticles on the hydrogen evolution reaction (recorded at -1.0V Vs Ag pseudo-reference electrode) was exploited to sense α-LA. A sensitive voltammetric response is observed, with (a) a sensitivity of 0.8789μA·nM-1.cm-2, (b) a detection limit (LOD, atS/N = 3) as low as 0.07ng·mL-1, and (c) linear response in the 0.75 to 630ngmL-1 α-LA concentration range. The assay is selective and reproducible, and the SPCEs have good storage stability. The SPCEs were applied (a) to the analysis of (spiked) maternal milk, (b) of spiked serum from healthy and pregnant persons, and (c) of serum of patients suffering from breast cancer. Graphical abstract Schematic presentation of a sensitive electrochemical immunoassay platform based on ferrocene modified gold nanoparticles and lysozyme modified magnetic beads for the determination of alpha lactalbumin in human sera and breastmilk by the amperometric response of ferrocene and hydrogen evolution reaction.

Amperometric immunoassay for the obesity biomarker amylin using a screen printed carbon electrode functionalized with an electropolymerized carboxylated polypyrrole.

Amylin (the islet amyloid polypeptide) is a hormone related to adiposity, hunger and satiety. It is co-secreted with insulin from pancreatic B-cells. An amperometric immunosensor is presented here for the determination of amylin. It is making use of a screen printed carbon electrode (SPCE) functionalized with electropolymerized poly(pyrrole propionic acid) (pPPA) with abundant carboxyl groups that facilitate covalent binding of antibody against amylin. A competitive immunoassay was implemented using biotinylated amylin and streptavidin labeled with horse radish peroxidase (HRP-Strept) as the enzymatic tracer. The amperometric detection of H2O2 mediated by hydroquinone was employed as an electrochemical probe to monitor the affinity reaction. The variables involved in the preparation and function of the immunosensor were optimized and the electrodes were characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The calibration graph for amylin, obtained by amperometry at -200mV vs Ag pseudo-reference electrode, showed a range of linearity extending from 1.0fg∙mL-1 to 50pg∙mL-1, with a detection limit of 0.92fg∙mL-1. This is approximately 7000 times lower than the minimum detectable concentration reported for the ELISA immunoassays available for amylin. The assay has excellent reproducibility and good selectivity over potential interferents. Graphical abstract Schematic of an amperometric competitive immunoassay for the obesity biomarker amylin using apoly(pyrrole propionic acid)-modified screen-printed electrode. The detection limit is 0.92fg∙mL-1 amylin. The method provides excellent reproducibility for the measurements, good selectivity and successful applicability to human urine and serum samples.

Fast amperometric immunoplatform for ovomucoid traces determination in fresh and baked foods

This paper describes the first immunosensor reported so far for the highly sensitive determination of the egg white allergen, ovomucoid (OM). The approach involves the selective capture of sandwich immunocomplexes formed by capture antibody-target protein allergen-HRP-labeled detector antibody onto carboxylic acid-functionalized magnetic beads (HOOC-MBs). The resulting magnetic bioconjugates were captured on the surface of disposable screen-printed carbon electrodes (SPCE) to perform amperometric detection at −0.20 V vs. the Ag pseudo-reference electrode in the presence of hydroquinone (HQ) and H2O2. The as prepared electrochemical immunoplatform showed a wide range of linearity (0.3–25 ng mL−1), a LOD of 0.1 ng mL−1, which is much lower than those claimed for commercial ELISA kits, and a great selectivity against other white egg allergenic proteins. The developed immunosensor was successfully employed for the simple and accurate determination of trace amounts of OM in unprocessed (eggs and wheat flour) and baked (bread) food samples.

Ultrasensitive determination of microribonucleic acids in cancer cells with nanostructured-disposable electrodes using the viral protein p19 for recognition of ribonucleic acid/microribonucleic acid homoduplexes

This work describes the development of a simple and ultrasensitive electroanalytical methodology for the determination of microribonucleic acids (miRNAs) making use of nanostructured disposable electrodes. The strategy involves direct hybridization of the target miRNA (miRNA–21) with a specific thiolated RNA probe self-assembled together with mercaptohexanol (MCH) onto gold nanoparticles (AuNP)-modified screen-printed electrodes (SH-RNA/MCH-AuNP-SPCEs). In addition, the resulting RNA/miRNA homoduplexes are recognized with the viral protein p19 and labeled with a HRP-conjugated anti-Maltose Binding Protein (MBP) monoclonal antibody. Amperometric detection was carried out at −0.20 V (vs. the Ag pseudoreference electrode) using the H2O2/hydroquinone (HQ) system. The prepared biosensors showed a linear dependence between the measured cathodic current and the concentration of the target miRNA over the 0.5–50 pmol L−1 range with a calculated detection limit (LOD) of 142 fmol L−1 without any target miRNA amplification. The assay lasted 60 min once the SH-RNA/MCH-AuNP-SPCEs were prepared. The SH-RNA/MCH-AuNP-SPCEs bioplatforms exhibit at least 2 months-storage stability and possess attractive practical advantages compared with other methods involving either p19 protein or amplification techniques. The usefulness of the method was demonstrated by determining the endogenous level of the target miRNA in total RNA (RNAt) extracted from healthy and cancerous breast cells.

An Electrochemical Enzyme Biosensor for 3-Hydroxybutyrate Detection Using Screen-Printed Electrodes Modified by Reduced Graphene Oxide and Thionine

A biosensor for 3-hydroxybutyrate (3-HB) involving immobilization of the enzyme 3-hydroxybutyrate dehydrogenase onto a screen-printed carbon electrode modified with reduced graphene oxide (GO) and thionine (THI) is reported here. After addition of 3-hydroxybutyrate or the sample in the presence of NAD+ cofactor, the generated NADH could be detected amperometrically at 0.0 V vs. Ag pseudo reference electrode. Under the optimized experimental conditions, a calibration plot for 3-HB was constructed showing a wide linear range between 0.010 and 0.400 mM 3-HB which covers the clinically relevant levels for diluted serum samples. In addition, a limit of detection of 1.0 µM, much lower than that reported using other biosensors, was achieved. The analytical usefulness of the developed biosensor was demonstrated via application to spiked serum samples.

An electrochemical immunosensor for brain natriuretic peptide prepared with screen-printed carbon electrodes nanostructured with gold nanoparticles grafted through aryl diazonium salt chemistry

A sensitive amperometric immunosensor has been prepared by immobilization of capture antibodies onto gold nanoparticles (AuNPs) grafted on a screen-printed carbon electrode (SPCE) through aryl diazonium salt chemistry using 4-aminothiophenol (AuNPs-S-Phe-SPCE). The immunosensor was designed for the accurate determination of clinically relevant levels of B-type natriuretic peptide (BNP) in human serum samples. The nanostructured electrochemical platform resulted in an ordered layer of AuNPs onto SPCEs which combined the advantages of high conductivity and improved stability of immobilized biomolecules. The resulting disposable immunosensor used a sandwich type immunoassay involving a peroxidase-labeled detector antibody. The amperometric transduction was carried out at −0.20V (vs the Ag pseudo-reference electrode) upon the addition of hydroquinone (HQ) as electron transfer mediator and H2O2 as the enzyme substrate. The nanostructured immunosensors show a storage stability of at least 25 days, a linear range between 0.014 and 15ngmL−1, and a LOD of 4pgmL−1, which is 100 times lower than the established cut-off value for heart failure (HF) diagnosis. The performance of the immunosensor is advantageously compared with that provided with immunosensors prepared by grafting SPCE with p-phenylendiamine (H2N-Phe-SPCE) and attaching AuNPs by immersion into an AuNPs suspension or by electrochemical deposition, as well as with immunosensors constructed using commercial AuNPs-modified SPCEs. The developed immunosensor was applied to the successful analysis of human serum from heart failure (HF) patients upon just a 10-times dilution as sample treatment.

Evaluation of electrochemical, UV/VIS and Raman spectroelectrochemical detection of Naratriptan with screen-printed electrodes

Naratriptan, active pharmaceutical ingredient with antimigraine activity was electrochemically detected in untreated screen-printed carbon electrodes (SPCEs). Cyclic voltammetry and differential pulse voltammetry were used to carry out quantitative analysis of this molecule (in a Britton-Robinson buffer solution at pH 3.0) through its irreversible oxidation (diffusion controlled) at a potential of +0.75V (vs. Ag pseudoreference electrode). Naratriptan oxidation product is an indole based dimer with a yellowish colour (maximum absorption at 320nm) so UV–VIS spectroelectrochemistry technique was used for the very first time as an in situ characterization and quantification technique for this molecule. A reflection configuration approach allowed its measurement over the untreated carbon based electrode. Finally, time resolved Raman Spectroelectrochemistry is used as a powerful technique to carry out qualitative and quantitative analysis of Naratriptan. Electrochemically treated silver screen-printed electrodes are shown as easy to use and cost-effective SERS substrates for the analysis of Naratriptan.

Disposable Amperometric Polymerase Chain Reaction-Free Biosensor for Direct Detection of Adulteration with Horsemeat in Raw Lysates Targeting Mitochondrial DNA.

A novel electrochemical disposable nucleic acid biosensor for simple, rapid, and specific detection of adulterations with horsemeat is reported in this work. The biosensing platform involves immobilization of a 40-mer RNA probe specific for a characteristic fragment of the mitochondrial DNA D-loop region of horse onto the surface of magnetic microcarriers. In addition, signal amplification was accomplished by using a commercial antibody specific to RNA/DNA duplexes and a bacterial protein conjugated with a horseradish peroxidase homopolymer (ProtA-HRP40). Amperometric detection at -0.20 V vs Ag pseudoreference electrode was carried out at disposable screen-printed carbon electrodes. The methodology achieved a limit of detection (LOD) of 0.12 pM (3.0 attomoles) for the synthetic target and showed ability to discriminate between raw beef and horsemeat using just 50 ng of total extracted mitochondrial DNA (∼16 660 bp in length) without previous fragmentation. The biosensor also allowed discrimination between 100% raw beef and beef meat samples spiked with only 0.5% (w/w) horse meat (levels established by the European Commission) using raw mitochondrial lysates without DNA extraction or polymerase chain reaction (PCR) amplification in just 75 min. These interesting features made the developed methodology an extremely interesting tool for beef meat screening, and it can be easily adapted to the determination of other meat adulterations by selection of the appropriate specific fragments of the mitochondrial DNA region and capture probes.

A bimetallic nanocoral Au decorated with Pt nanoflowers (bio)sensor for H2O2 detection at low potential

In this work, we have developed for the first time a method to make novel gold and platinum hybrid bimetallic nanostructures differing in shape and size. Au-Pt nanostructures were prepared by electrodeposition in two simple steps. The first step consists of the electrodeposition of nanocoral Au onto a gold substrate using hydrogen as a dynamic template in an ammonium chloride solution. After that, the Pt nanostructures were deposited onto the nanocoral Au organized in pores. Using Pt (II) and Pt (IV), we realized nanocoral Au decorated with Pt nanospheres and nanocoral Au decorated with Pt nanoflowers, respectively. The bimetallic nanostructures showed better capability to electrochemically oxidize hydrogen peroxide compared with nanocoral Au. Moreover, Au-Pt nanostructures were able to lower the potential of detection and a higher performance was obtained at a low applied potential. Then, glucose oxidase was immobilized onto the bimetallic Au-Pt nanostructure using cross-linking with glutaraldehyde. The biosensor was characterized by chronoamperometry at +0.15V vs. Ag pseudo-reference electrode (PRE) and showed good analytical performances with a linear range from 0.01 to 2.00mM and a sensitivity of 33.66µA/mMcm2. The good value of Kmapp (2.28mM) demonstrates that the hybrid nanostructure is a favorable environment for the enzyme. Moreover, the low working potential can minimize the interference from ascorbic acid and uric acid as well as reducing power consumption to effect sensing. The simple procedure to realize this nanostructure and to immobilize enzymes, as well as the analytical performances of the resulting devices, encourage the use of this technology for the development of biosensors for clinical analysis.

Disposable Amperometric Immunosensor for the Determination of Human P53 Protein in Cell Lysates Using Magnetic Micro-Carriers.

An amperometric magnetoimmunosensor for the determination of human p53 protein is described in this work using a sandwich configuration involving the covalent immobilization of a specific capture antibody onto activated carboxylic-modified magnetic beads (HOOC-MBs) and incubation of the modified MBs with a mixture of the target protein and horseradish peroxidase-labeled antibody (HRP-anti-p53). The resulting modified MBs are captured by a magnet placed under the surface of a disposable carbon screen-printed electrode (SPCE) and the amperometric responses are measured at −0.20 V (vs. an Ag pseudo-reference electrode), upon addition of hydroquinone (HQ) as a redox mediator and H2O2 as the enzyme substrate. The magnetoimmunosensing platform was successfully applied for the detection of p53 protein in different cell lysates without any matrix effect after a simple sample dilution. The results correlated accurately with those provided by a commercial ELISA kit, thus confirming the immunosensor as an attractive alternative for rapid and simple determination of this protein using portable and affordable instrumentation.

Electrochemical immunosensor for receptor tyrosine kinase AXL using poly(pyrrolepropionic acid)-modified disposable electrodes

A sensitive and rapid method for the determination of the clinically relevant biomarker receptor tyrosine kinase AXL in serum involving amperometric disposable immunosensors is reported. The target protein was sandwiched between a specific capture antibody covalently immobilized on screen-printed carbon electrodes modified with electropolymerized poly(pyrrolepropionic acid) and a biotinylated detector antibody labeled with a streptavidin-horseradish peroxidase conjugate. The amperometric responses were measured at −0.20V vs the Ag pseudo-reference electrode of the SPCE upon the addition of H2O2 in the presence of hydroquinone (HQ) as mediator. This integrated immunosensing platform showed a low limit of detection (337pgmL−1), a good selectivity against other non-target serum proteins, and provided results statistically in agreement with those obtained by using a commercial ELISA kit. These attractive features together with the simplicity and easy automation and miniaturization of the required instrumentation make the developed methodology a promising alternative in the development of devices for on-site clinical analysis.

Electrochemical detection of peanuts at trace levels in foods using a magnetoimmunosensor for the allergenic protein Ara h 2

A highly sensitive disposable amperometric magnetoimmunosensor for the rapid determination of Ara h 2 protein, one of the major peanut allergens, is reported. The approach uses a sandwich configuration involving selective capture and detector antibodies and carboxylic acid-modified magnetic beads (HOOC-MBs). Detector antibodies are labeled with HRP-conjugated secondary antibodies and the MBs bearing the immunoconjugates are magnetically captured on surface of a disposable screen-printed carbon electrode (SPCE). The affinity reactions are monitored amperometrically at −0.20V (vs a Ag pseudo-reference electrode) in the presence of hydroquinone (HQ) as electron transfer mediator and upon addition of H2O2 as the enzyme substrate. The developed magnetoimmunosensor exhibits a wide range of linearity between 87 and 10,000pgmL−1 Ara h 2 with a detection limit of 26pgmL−1 as well as a great selectivity against other non-target proteins. The magnetoimmunosensing platform was successfully applied for the detection of Ara h 2 in different food extracts. After an appropriate sample dilution no matrix effects were observable. The developed methodology was able to detect trace amounts of the peanut allergen (0.0005% or 5.0mgkg−1) in wheat flour spiked samples. The results correlated properly with those provided by a commercial ELISA kit.

Rapid Legionella pneumophila determination based on a disposable core–shell Fe3O4@poly(dopamine) magnetic nanoparticles immunoplatform

A novel amperometric magnetoimmunoassay, based on the use of core–shell magnetic nanoparticles and screen-printed carbon electrodes, was developed for the selective determination of Legionella pneumophila SG1. A specific capture antibody (Ab) was linked to the poly(dopamine)–modified magnetic nanoparticles (MNPs@pDA-Ab) and incubated with bacteria. The captured bacteria were sandwiched using the antibody labeled with horseradish peroxidase (Ab-HRP), and the resulting MNPs@pDA-Ab-Legionella neumophila-Ab-HRP were captured by a magnetic field on the electrode surface. The amperometric response measured at −0.15 V vs. Ag pseudo-reference electrode of the SPCE after the addition of H2O2 in the presence of hydroquinone (HQ) was used as transduction signal. The achieved limit of detection, without pre-concentration or pre-enrichment steps, was 104 Colony Forming Units (CFUs) mL−1. The method showed a good selectivity and the MNPs@pDA-Ab exhibited a good stability during 30 days. The possibility of detecting L. pneumophila at 10 CFU mL−1 level in less than 3 h, after performing a membrane-based preconcentration step, was also demonstrated.