Adsorption Of Nitrite Research Articles

Machine learning-enhanced modeling and characterization for optimizing dietary Fiber production from Highland barley bran.

This study investigated the modification of highland barley bran through co-fermentation of Lactobacillus bulgaricus and Kluyveromyces marxianus, and developed a dynamic prediction model for DF content under these co-fermentation conditions using machine learning algorithms. The results showed that the XGBoost algorithm could predict changes in the DF component content (R2 = 0.9553(SDF/IDF), RMSE = 0.0464.) and identify optimal fermentation conditions. Under the optimal conditions, both strains exhibited synergistic effects, where the lactic acid produced by Lactobacillus bulgaricus and β-glucosidase produced by Kluyveromyces marxianus might facilitate IDF decomposition and conversion, resulting in a maximum SDF/IDF ratio of 0.6911. This led to a 27.65 % reduction in IDF content and a 19.11 % increase in SDF content. Moreover, the physicochemical and functional properties of DF were enhanced after co-fermentation. The structure of DF became more loose and porous, its thermal stability improved, and its water-holding, oil-holding, and swelling capacities increased by 53.54 %, 16.11 %, and 44.96 %, respectively, compared with the unfermented counterpart; In terms of adsorption characteristics, its glucose, cholesterol and nitrite adsorption capacities were also significantly improved. According to in vitro gastrointestinal simulated digestion, digestion would have a great impact on the fermented DF, which showed good antioxidant properties during the intestinal digestion stage.

Oxygen vacancies-rich CoMoO4 nanosheets facilitate the electroreduction of nitrite to ammonia

Electrocatalytic reduction is a promising method to remove NO2−; not only can it deal with environmental issues, but it can also recycle NO2− to form NH3. This study involved the preparation of oxygen vacancies-rich monoclinic cobalt molybdate nanosheets on nickel foam (CoMoO4/NF) employing a hybrid approach of hydrothermal and calcination reduction techniques renders highly effective catalysts for electroreduction of nitrite (NO2−RR). The presence of oxygen vacancies increases carrier density, enhancing electrical conductivity, reducing resistance, and accelerating electron transfer. Additionally, it serves as an active site for absorbing NO2−. In an aqueous solution containing 0.5 M Na2SO4 and 0.1 M NO2−, the Faraday efficiency (FE) of CoMoO4/NF reaches an impressive 98.6 ± 0.02 % at −0.8 V vs. RHE, and NH3 yield demonstrates a commendable performance, attaining 32.72 ± 0.17 mg h−1 cm−2. Meanwhile, it exhibits robust and enduring characteristics throughout the stability tests. Employing CoMoO4/NF as the cathode, the Zn−NO2− battery demonstrates a peak power density of 5.94 mW cm−2 alongside an NH3 yield of 3.88 mg h−1 cm−2 and an FE of 91.88 %. Furthermore, density functional theory calculations uncover the significant influence of oxygen vacancies on enhancing nitrite adsorption and activation over the CoMoO4 surface and bring to light possible reaction pathways.

Kinetics of Nitrite Adsorption onto a Styrene Divinylbenzene Macroporous Strong Base Polymer

A suitable adsorbent for the treatment of nitrite in wastewater was investigated using a macroporous styrene divinylbenzene strong base polymer for 10−3 M to 6 x 10−3M NaNO2 at room temperature using a batch protocol. The supernatant concentrations were determined rapidly and inexpensively by an electrochemical method. To investigate the sorption mechanism and the rate-determining step, four kinetic models were investigated. The pseudo-second order kinetic model best fit the nitrite adsorption onto the polymer. The highest correlation coefficient (0.9999) and chi square (7.59 x 10−4) values were obtained for 0.046 to 0.276 g L−1 NO2 - which is characteristic of chemosorption. The results demonstrate that the investigated polymer is suitable at room temperature for removing nitrites for water to the legally allowed values for 10−3 M to 1.5 x 10−3 M NaNO2 but dilution is required for higher concentrations.

Physicochemical and structural properties of soluble dietary fibres in navel orange peel modified by superfine grinding and their immunomodulatory activities

The physicochemical and structural properties of water soluble dietary fibres (SDF) extracted from navel orange peel modified by superfine grinding were investigated, as well as the immunomodulatory activity in RAW264.7 cells. Results showed that superfine grinding treatment could significantly enhance the extract yield and reduce the particle size of SDF. And the water-holding capacity, swelling capacity, oil-holding capacity, nitrite adsorption capacity and total antioxidant capacity were consequently improved. Modified SDF could significantly decrease the generation of reactive oxygen species (ROS), and promoted the production of NO and some cytokines (IL-1β, TNF-ɑ, MCP-1, and IL-6) in RAW264.7 cells. The expressions of P-P65 and HO-1 in SDF-M200 and SDF-M500 were significantly up-regulated, suggesting that SDF could mildly induce macrophage activation and enhance the immune activity. These indicated that SDF modified by superfine grinding could serve as a promising candidate of immunomodulatory ingredient for functional foods.

How lignocellulose degradation can promote the quality and function of dietary fiber from bamboo shoot residue by Inonotus obliquus fermentation

Lignocellulose constitutes the primary component of dietary fiber. We assessed how fermenting bamboo shoot residue with the medicinal white-rot fungus Inonotus obliquus affected the yield, composition, and functional attributes of dietary fiber by altering bamboo shoot residue lignocellulose's spatial structure and composition. I. obliquus secretes lignocellulolytic enzymes, which effectively enhance the degradation of holocellulose and lignin by 87.8% and 25.5%, respectively. Fermentation led to a more porous structure and reduced crystallinity. The yield of soluble dietary fiber increased from 5.1 g/100 g raw BSR to 7.1 g/100 g 9-day-fermented bamboo shoot residue. The total soluble sugar content of dietary fiber significantly increased from 9.2% to 13.8%, which improved the hydration, oil holding capacity, in vitro cholesterol, sodium cholate, and nitrite adsorption properties of dietary fiber from bamboo shoot residue. These findings confirm that I. obliquus biotransformation is promising for enhancing dietary fiber yield and quality.

Structure, thermal stability, physicochemical and functional characteristics of insoluble dietary fiber obtained from rice bran with steam explosion treatment: Effect of different steam pressure and particle size of rice bran

Rice bran was modified by steam explosion (SE) treatment to investigate the impact of different steam pressure (0.4, 0.8, 1.2, 1.6, and 2.0 MPa) with rice bran through 60 mesh and rice bran pulverization (60, 80, and 100 mesh) with the steam pressure of 1.2 MPa on the structure, thermal stability, physicochemical and functional characteristics of insoluble dietary fiber (IDF) extracted from rice bran. IDF with SE treatment from scanning electron microscopy images showed a porous honeycomb structure, and lamellar shape in IDF became obvious with the increase of steam pressure. The relative crystallinity and polymerization degree of crystalline regions in IDF from rice bran with SE treatment from X-ray diffraction analysis were decreased. Differential scanning calorimetry results showed that thermal stability of IDF with SE treatment increased with the increase of crushing degree. The results of FT-IR also suggested that some glycosidic and hydrogen bonds in IDF could be broken, and some cellulose and hemicellulose were degraded during SE process. The physicochemical and functional characteristics of IDF, including water-holding capacity, oil-holding, glucose adsorption capacity, α-amylase and pancreatic lipase inhibition capacity were decreased with the increase of steam pressure and crushing degree. The swelling and nitrite adsorption capacities of IDF were increased first and then decreased with the increase of steam pressure. The physicochemical and functional characteristics of IDF from rice bran were improved after SE treatment, which might provide references for the utilization of IDF from rice bran with SE treatment.

Composition, structural, physicochemical and functional properties of dietary fiber from different milling fractions of black rice bran

Black rice bran is a superior dietary fiber (DF) resource. However, the lack of specific distribution and functionality of DF in black rice bran has constrained its refined processing. This study divided black rice bran into five equal bran fractions (BF) by stepwise milling to obtain BF1(outermost layer) to BF5 (the innermost layer). The contents, structure, physicochemical and functional properties of DF in each bran fractions were investigated. The results revealed that the insoluble, soluble and total dietary fiber (IDF, SDF and TDF) contents were 17.52 ± 0.48 to 31.14 ± 0.96, 2.03 ± 0.20 to 3.86 ± 0.01 and 19.57 ± 0.28 to 34.61 ± 1.10 g/100 g dry basis, respectively. Compared to BF1, the TDF content of BF2–BF5 was reduced by 3.90, 3.20, 21.74 and 43.46%, respectively. The main monosaccharides in both IDF and SDF were xylose, glucose, arabinose and galactose. The molecular weight of SDF samples ranged from 17.19 ± 1.95 to 36.32 ± 0.80 kDa. The outer bran fractions (BF1–BF3) IDF exhibited higher water swelling, water retention, oil adsorption capacity, together with cholesterol and sodium nitrite adsorption capacity than those of inner bran fractions (BF4–BF5), owing to their lower crystallinity and well-developed porous structure. These results provide essential data for the development of black rice DF-based food processing with enhanced functional benefits.

Tailoring the interior structure of Cu2O Shell-in-Shell nanospheres for high-performance electrocatalytic nitrate-to-ammonia conversion

Electrocatalytic nitrate reduction is one of the most promising technology for removing harmful nitrate from water while simultaneously producing value-added ammonia. Regulating the internal structure of the benchmark electrocatalyst copper can further improve nitrate-to-ammonia conversion performance. Herein, we synthesized a series of hollow multi-shell structured Cu2O nanospheres (NSs) via a multistep Ostwald ripening method, and evaluated their nitrate-to-ammonia conversion performance. Results show that 2-shell Cu2O NSs demonstrated the highest nitrate conversion (98.1 %), ammonia selectivity (80.2 %), ammonia Faradic efficiency (70.3 %) and reaction rate constant (0.03 min−1) for nitrate-to-ammonia conversion. Important influencing factors are also examined including applied potentials and nitrate concentrations. Mechanistic study unravels that the outstanding electrocatalytic performance of 2-shell Cu2O NSs originates from the strongest nitrite adsorption so as to enhance nitrate-to-ammonia conversion. Materials characterizations verify that Cu2O NSs were reduced to metallic copper that severed as the real active site during electrocatalytic nitrate reduction. This work unveils the interior structure-dependent electrocatalytic performance of Cu2O NSs for nitrate-to-ammonia conversion, which offers a practical strategy to design structurally novel heterogeneous catalysts for various applications.

Sulfur-regulated CoSe2 nanowires with high-charge active centers for electrochemical nitrate reduction to ammonium.

Developing high-efficiency electrocatalysts for nitrate-to-ammonia transformation holds significant promise for the production of ammonia, a crucial component in agricultural fertilizers and as a carbon-free energy carrier. In this study, we propose a viable strategy involving sulfur doping to modulate both the microstructure and electronic properties of CoSe2 for nitrate reduction. This approach remarkably enhances the conversion of nitrate to ammonia by effectively regulating the adsorption capability of nitrogenous intermediates. Specifically, sulfur-doped CoSe2 nanowires (S-CoSe2 NWs) exhibit a peak faradaic efficiency of 93.1% at -0.6 V vs. RHE and achieve the highest NH3 yield rate of 11.6 mg h-1 cm-2. Mechanistic investigations reveal that sulfur doping facilitates the creation of highly charged active sites, which enhance the adsorption of nitrite and subsequent hydrogenation, leading to improved selectivity towards ammonia production.

Fabrication of a porous Urea@MIL-100(Fe)/CI-MCC/SA hydrogel for All-In-One adsorption, removal and fluorescence monitoring of nitrite

In this paper, a novel All-In-One Urea@MIL-100(Fe)/CI-MCC/SA hydrogel platform was generated by microcrystalline cellulose (MCC) functionalized with pH-response probe (CI), MIL-100 (Fe) and sodium alginate (SA), which was as a carrier of urea to adsorb, remove and monitor NO2-. Under acidic condition, the fluorescent hydrogel platform could produce N2, CO2 and H2O through the diazotization and redox reaction between urea and NO2- with a removal efficiency up to 99.8%, and could also character a good adsorption property for NO2- due to the positive charges of protonation (the maximum adsorption capacity was 21.67 mg g−1), and the adsorption kinetics conformed to pseudo-second-order model. By carried out the NO2- removal step in fluorescent hydrogel platform, NO2- could also be detected indirectly by sensing the changes of pH within 15 min. The linear response range was 0–0.005 M, and the detection limit (LOD) was 74 μM. These results demonstrated that this All-In-One Urea@MIL-100(Fe)/CI-MCC/SA hydrogel platform had great potential in environment. This strategy for the removal and monitoring of NO2- could be employed to related applications in water purification and environmental protection. Environmental implicationNitrite is one of the important indicators of water monitoring, which is harmful to human and environment. The removal and monitoring of nitrite in industrial wastewater and surface water is very important, but there are no studies about it at present. Based on the fact that urea can react with nitrite to produce green products, we synthesized a novel functional hydrogel to achieve adsorption, removal and fluorescence monitoring of nitrite for the first time. Besides, the practicability of the material in environmental water samples was verified through the detection of nitrite in simulated wastewater.

Effects of cellulose-degrading fungus Penicillium griseofulvum on the structure characteristics and adsorption properties of soluble dietary fiber from Citrus aurantium L

Citrus aurantium L. (CAL) was a potential low-cost source of soluble dietary fiber (SDF). To make full use of this resource, a considerable efficiency cellulose degrading strain (Penicillium griseofulvum) was screened from soil humus and used in the modification of CAL-SDF. After fermentation by Penicillium griseofulvum, the structure characteristics and adsorption properties of CAL-SDF were improved. Under the optimum fermentation conditions, the yield of SDF enlarged from 5.47% to 20.0%. Scanning electron microscope (SEM) and Fourier infrared spectroscopy (FTIR) analysis showed that the microstructure became loose and porous after fermentation, unfermented SDF (U-SDF) and fermented SDF (F-SDF) had characteristic intake peaks of polysaccharide. The results of X-ray diffraction (XRD) and thermogravimetric analysis (TGA) showed that the crystallization degree (from 16.50% to 23.15%) of SDF was improved by fermentation, which increased the thermal stability of SDF. The monosaccharide composition and average molecular weight (Mw) results showed that fermentation altered the monosaccharide percentage of SDF as well as significantly reduced the molecular weight (from 576,914 to 112,977 Da). Together, these alterations reduced the water holding capacity (from 11.31 to 1.31 g/g) and oil holding capacity (from 14.24 to 12.86 g/g) of SDF, but significant (P < 0.05) increased water solubility (from 89.35% to 92.09%), the glucose dialysis retardation index (GDRI), cholesterol adsorption capacity (CAC) and nitrite adsorption capacity (NIAC). In summary, Penicillium griseofulvum could be used as a potential strain for the modification of the CAL-SDF. Moreover, F-SDF may be used as a functional food component, which will increase CAL's value proposition.

Interaction of Nitrite Ions with Hydrated Portlandite Surfaces: Atomistic Computer Simulation Study.

The nitrite admixtures in cement and concrete are used as corrosion inhibitors for steel reinforcement and also as anti-freezing agents. The characterization of the protective properties should account for the decrease in the concentration of free NO2- ions in the pores of cement concretes due to their adsorption. Here we applied the classical molecular dynamics computer simulation approach to quantitatively study the molecular scale mechanisms of nitrite adsorption from NaNO2 aqueous solution on a portlandite surface. We used a new parameterization to model the hydrated NO2- ions in combination with the recently upgraded ClayFF force field (ClayFF-MOH) for the structure of portlandite. The new NO2- parameterization makes it possible to reproduce the properties of hydrated NO2- ions in good agreement with experimental data. In addition, the ClayFF-MOH model improves the description of the portlandite structure by explicitly taking into account the bending of Ca-O-H angles in the crystal and on its surface. The simulations showed that despite the formation of a well-structured water layer on the portlandite (001) crystal surface, NO2- ions can be strongly adsorbed. The nitrite adsorption is primarily due to the formation of hydrogen bonds between the structural hydroxyls on the portlandite surface and both the nitrogen and oxygen atoms of the NO2- ions. Due to that, the ions do not form surface adsorption complexes with a single well-defined structure but can assume various local coordinations. However, in all cases, the adsorbed ions did not show significant surface diffusional mobility. Moreover, we demonstrated that the nitrite ions can be adsorbed both near the previously-adsorbed hydrated Na+ ions as surface ion pairs, but also separately from the cations.

NiMoO4 nanorods with oxygen vacancies self-supported on Ni foam towards high-efficiency electrocatalytic conversion of nitrite to ammonia

As an eco-friendly and sustainable strategy, the electrochemical reduction of nitrite (NO2–) can simultaneous generation of NH3 and treatment of NO2– contamination in the environment. Herein, monoclinic NiMoO4 nanorods with abundant oxygen vacancies self-supported on Ni foam (NiMoO4/NF) are considered high-performance electrocatalysts for ambient NH3 synthesis by reduction of NO2−, which can deliver an outstanding yield of 18089.39 ± 227.98 μg h−1 cm−2 and a preferable FE of 94.49 ± 0.42% at −0.8 V. Additionally, its performance remains relatively stable during long-term operation as well as cycling tests. Furthermore, density functional theory calculations unveil the vital role of oxygen vacancies in promoting nitrite adsorption and activation, ensuring efficient NO2–RR towards NH3. A Zn-NO2– battery with NiMoO4/NF as the cathode shows high battery performance as well.

Effects of cavitation-jet technology combined with enzyme treatment on the structure properties and functional properties of OKARA insoluble dietary fiber

In this study, a new composite modification method utilizing a cavitation jet combined with a composite enzyme (cellulase and xylanase) was developed to modify the insoluble dietary fibre (IDF) of okara (IDF was first treated with the cavitation jet at 0.3 MPa for 10 min, and then 6% of the enzyme was added, the composite enzyme with a 1:1 enzyme activity was hydrolysed for 1.5 h to obtain the modified IDF), and explored the structure–activity relationship between the structural properties, physicochemical properties and biological activities of IDF before and after modification. Under the action of cavitation jet and double enzyme hydrolysis, the modified IDF had a wrinkled and loose porous structure, which improved the thermal stability. Its water holding capacity (10.81 ± 0.17 g/g), oil holding capacity (4.83 ± 0.03 g/g) and swelling capacity (18.60 ± 0.60 mL/g) were significantly higher than those of unmodified IDF. In addition, compared with other IDFs, the combined modified IDF had greater advantages in nitrite adsorption (13.75 ± 0.14 μg/g), glucose adsorption (6.46 ± 0.28 mmol/g) and cholesterol adsorption (16.86 ± 0.83 mg/g), and improved in vitro probiotic activity and in vitro anti-digestion rate. The results show that the cavitation jet combined with compound enzyme modification method can effectively improve the economic value of okara.

Oxygen Reduction Reaction Activity in Non-Precious Single-Atom (M-N/C) Catalysts-Contribution of Metal and Carbon/Nitrogen Framework-Based Sites.

We examine the performance of a number of single-atom M-N/C electrocatalysts with a common structure in order to deconvolute the activity of the framework N/C support from the metal M-N4 sites in M-N/Cs. The formation of the N/C framework with coordinating nitrogen sites is performed using zinc as a templating agent. After the formation of the electrically conducting carbon-nitrogen metal-coordinating network, we (trans)metalate with different metals producing a range of different catalysts (Fe-N/C, Co-N/C, Ni-N/C, Sn-N/C, Sb-N/C, and Bi-N/C) without the formation of any metal particles. In these materials, the structure of the carbon/nitrogen framework remains unchanged-only the coordinated metal is substituted. We assess the performance of the subsequent catalysts in acid, near-neutral, and alkaline environments toward the oxygen reduction reaction (ORR) and ascribe and quantify the performance to a combination of metal site activity and activity of the carbon/nitrogen framework. The ORR activity of the carbon/nitrogen framework is about 1000-fold higher in alkaline than it is in acid, suggesting a change in mechanism. At 0.80 VRHE, only Fe and Co contribute ORR activity significantly beyond that provided by the carbon/nitrogen framework at all pH values studied. In acid and near-neutral pH values (pH 0.3 and 5.2, respectively), Fe shows a 30-fold improvement and Co shows a 5-fold improvement, whereas in alkaline pH (pH 13), both Fe and Co show a 7-fold improvement beyond the baseline framework activity. The site density of the single metal atom sites is estimated using the nitrite adsorption and stripping method. This method allows us to deconvolute the framework sites and metal-based active sites. The framework site density of catalysts is estimated as 7.8 × 1018 sites g-1. The metal M-N4 site densities in Fe-N/C and Co-N/C are 9.4 × 1018 sites-1 and 4.8 × 1018 sites g-1, respectively.

Effect of different milling methods on physicochemical and functional properties of mung bean flour.

There needs to be more information concerning the effect of different milling methods on the physicochemical properties of whole-grain mung bean flour. Therefore, the physicochemical properties of whole grain mung bean flour were analyzed using universal grinders (UGMB), ball mills (BMMB), and vibration mills (VMMB). The results showed that the particle size of the sample after ultrafine grinding treatment was significantly reduced to 21.34 μm (BMMB) and 26.55 μm (VMMB), and the specific surface area was increased. The particle distribution was uniform to a greater extent, and the color was white after treatment. Moreover, the water holding capacity (WHC), oil holding capacity (OHC), and swelling power (SP) increased, and the bulk density and solubility (S) decreased. The Rapid Viscosity Analyzer (RVA) indicated that the final viscosity of the sample after ultrafine grinding was high. Furthermore, rheological tests demonstrated that the consistency coefficient K, shear resistance, and viscosity were decreased. The results of functional experiments showed that the treated samples (BMMB and VMMB) increased their capacity for cation exchange by 0.59 and 8.28%, respectively, bile acid salt adsorption capacity increased from 25.56 to 27.27 mg/g and 26.38 mg/g, and nitrite adsorption capacity increased from 0.58 to 1.17 mg/g and 1.12 mg/g.

Effect of Lactobacillus rhamnosus GG fermentation on the structural and functional properties of dietary fiber in bamboo shoot and its application in bread.

The purpose of this study was to investigate the effects of Lactobacillus rhamnosus GG (LGG) fermentation on the composition, structure, and functional properties of dietary fiber (DF) in bamboo shoot. Then, we added it to bread to evaluate the texture properties, digestive properties, and functionality of bread. After LGG fermentation, the DF was decomposed into pieces, which had stronger water-swelling capacity and nitrite adsorption capacity. The ability of producing short-chain fatty acids was significantly improved and the digestive resistance was remarkable enhanced as well. Except the bread hardness was increased, there was no significant difference in other texture properties when adding 3% FTDF-LGG to bread. It had good adsorption capacity of cholesterol and more than 25% reduced the release of reducing sugar. Overall, the technic of LGG fermentation had improved functional properties of DF in bamboo shoot, which could be applied to bread production for exerting its effects in the future. PRACTICAL APPLICATIONS: Bamboo shoots are immature and tender stems of bamboo, rich in nutritional value, and rich in DF. Bamboo shoot DF has been proven to have a variety of biological activities, and is the main material for bamboo shoot to exert functional activities. In this study, bamboo shoot DF was modified by LGG fermentation, which showed stronger functional activity, and was successfully applied to bread. This study lays the foundation for the fermented modified bamboo shoot DF and its application in food.

Copper single-atom catalyst as a high-performance electrocatalyst for nitrate-ammonium conversion

Electrocatalytic nitrate reduction reaction (NO3RR), as a promising alternative to the Haber-Bosh process, provides new opportunities for ammonia (NH3) production from the environmental and energy viewpoint. However, the NH3 yield rate and selectivity for NO3RR are still limited due to the lack of efficient electrocatalysts. Herein, we demonstrate an active and selective copper single-atom catalyst (Cu-N-C) for nitrate reduction to NH3. The complete conversion of nitrate (50 mg L−1 NO-3-N) was achieved at −1.5 V vs. SCE with a high NH3 yield rate (9.23 mg h−1 mg−1cat.) and selectivity (94%). Remarkably, Cu-N-C dramatically inhibited the formation of toxic nitrite and double-nitrogen products due to the enhanced nitrite adsorption and restrained N-N coupling that led to nitrate deep reduction to NH3. The remaining nitrate (0.06 mg L−1) and nitrite (1 mg L−1) fully meet the drinking-water standards. Density functional theory simulations reveal that the single-site nature of Cu-N-C facilitated the reduction of HNO*3 to NO*2 and NH*2 to NH3, thus leading to the selective nitrate reduction to NH3.

Influence of modification methods on physicochemical and structural properties of soluble dietary fiber from corn bran.

Soluble dietary fiber (SDF), which is a component of dietary fibers exhibit many physiological functions, biological activity, and good gel forming ability. In this study, extraction of SDF from corn bran was evaluated using twin-screw extrusion and ultrasonic treatment and the combinations of the respective methods with dual enzyme hydrolysis. The monosaccharide compositions, molecular weight, physicochemical properties, and structural and functional characteristics were determined. The results showed that ultrasonic and twin-extrusion treatments significantly increased the SDF content from 2.42 to 4.58 and 6.54%, respectively. Dual enzyme hydrolysis further increased the SDF content. Modification treatment changed the monosaccharide composition, improved physicochemical and functional properties, such as water and oil holding capacity, nitrite adsorption, and antioxidative ability. In conclusion, physical modification combined with enzyme treatment distinctly improved the extraction yield, physicochemical and functional properties of SDF. Therefore, the modified SDF is suitable as a functional food additive.

Facile Synthesis of Hydrogel-Based Ion-Exchange Resins for Nitrite/Nitrate Removal and Studies of Adsorption Behavior.

This research aimed to create facile, reusable, hydrogel-based anion exchange resins that have been modified with two different amines to test their ability to adsorb nitrate and nitrite in water using batch and continuous systems. In the batch experiment, maximum adsorption capacities of nitrate and nitrite onto poly (ethylene glycol) diacrylate methacryloxyethyltrimethyl ammonium chloride (PEGDA-MTAC) and poly (ethylene glycol) diacrylate 2-aminoethyl methacrylate hydrochloride (PEGDA-AMHC) adsorbents can be obtained as 13.51 and 13.16 mg NO3−-N/g sorbent; and 12.36 and 10.99 mg NO2−-N/g sorbent respectively through the Langmuir isotherm model. After 15 adsorption/desorption cycles, PEGDA-MTAC and PEGDA-AMHC retained nitrate adsorption efficiencies of 94.71% and 83.02% and nitrite adsorption efficiencies of 97.38% and 81.15% respectively. In a column experiment, modified adsorbents demonstrated adsorption efficiencies greater than 45% after being recycled five times. Proposed hydrogel-based adsorbents can be more effective than several types of carbon-based sorbents for nitrate and nitrite removal in water and have benefits such as reduced waste generation, cost-effectiveness, and a facile synthesis method.