Additional Coordination Sites Research Articles

Chirality Sensing of Amino Acid Esters by S-2-Methylbutanamido-Substituted m-Phthalic Diamide-Linked Zinc Bisporphyrinate.

To understand the role of an additional coordination site in the linker in chirality sensing, we designed and synthesized an S-2-methylbutanamido-substituted m-phthalic diamide-linked zinc bisporphyrinate, [Zn2(S-MAABis)] and investigated its ability to sense the chirality of amino acid esters. The 1H NMR spectra and the crystal structure showed that the amido oxygen adjacent to the chiral carbon was coordinated with zinc. NMR and UV-vis titration showed that the binding of [Zn2(S-MAABis)] to amino acid esters occurred via two equilibria, forming 1:1 and 1:2 host-guest complexes. The CD spectra suggested that [Zn2(S-MAABis)] can effectively recognize the absolute configuration of amino acid esters. The sign of the CD spectra remained unchanged during the titration, indicating that the corresponding 1:1 and 1:2 host-guest complexes had the same chirality. This is different from previously studied amino-substituted m-phthalic diamide-linked zinc bisporphyrinate [Zn2(AmBis)], which showed chirality inversion during titration. Theoretical calculations indicated that the additional coordination sites (amido or amino) in the 1:1 host-guest complexes played different roles, leading to differences in chirality. Our studies suggest that the introduction of a coordination site can influence the chirality transfer process, but the results of chirality transfers are dependent on the specific binding modes.

Exceptionally High Perfluorooctanoic Acid Uptake in Water by a Zirconium-Based Metal-Organic Framework through Synergistic Chemical and Physical Adsorption.

Perfluorooctanoic acid (PFOA) is an environmental contaminant ubiquitous in water resources, which as a xenobiotic and carcinogenic agent, severely endangers human health. The development of techniques for its efficient removal is therefore highly sought after. Herein, we demonstrate an unprecedented zirconium-based MOF (PCN-999) possessing Zr6 and biformate-bridged (Zr6)2 clusters simultaneously, which exhibits an exceptional PFOA uptake of 1089 mg/g (2.63 mmol/g), representing a ca. 50% increase over the previous record for MOFs. Single-crystal X-ray diffraction studies and computational analysis revealed that the (Zr6)2 clusters offer additional open coordination sites for hosting PFOA. The coordinated PFOAs further enhance the interaction between coordinated and free PFOAs for physical adsorption, boosting the adsorption capacity to an unparalleled high standard. Our findings represent a major step forward in the fundamental understanding of the MOF-based PFOA removal mechanism, paving the way toward the rational design of next-generation adsorbents for per- and polyfluoroalkyl substance (PFAS) removal.

Heme-substituted protein assembly bridged by synthetic porphyrin: achieving controlled configuration while maintaining rotational freedom.

The use of biological host-guest interactions, specifically the binding of hemoprotein to heme, has attracted significant research interest in the design of artificial protein assemblies. However, because of the inherent flexibility of the propionic acid group of heme, it is difficult to control the positioning and orientation of the protein unit and to construct well-ordered structures. Herein, we report a heme-substituted protein dimer composed of the native hemoprotein HasA, which accommodates a tetraphenylporphyrin bearing an additional metal coordination site. The specific binding of the tetraphenylporphyrin with an additional metal coordination site that protrudes in a fixed direction confines the configuration of the dimer structure to a defined bent form. The small-angle X-ray scattering profile shows the dimer structure with a bent form and suggests dynamic rotational behavior while keeping its bent-core structure, resembling a bevel gear. This unique dimer structure demonstrates that the design of heme-substituted protein assemblies can be expanded to protein assemblies while maintaining the rotational freedom of the individual protein units.

Di(pyridin-2-yl)amino-substituted 1,10-phenanthrolines and their Ru(II)-Pd(II) dinuclear complexes: synthesis, characterization and application in Cu-free Sonogashira reaction.

Dinuclear complexes bearing Ru(II) photoactive centers are of interest for the development of efficient dual catalysts for many photocatalyzed reactions. Ditopic polypyridine ligands, bis(pyridin-2-yl)amino-1,10-phenanthrolines, containing an additional coordination site (bis(pyridin-2-yl)amine, dpa) at positions 3, 4 or 5 of the 1,10-phenanthroline core (Phen-3NPy2, Phen-4NPy2 and Phen-5NPy2) were synthesized. They were used as bridging ligands to obtain dinuclear complexes [(bpy)2Ru(Phen-NPy2)PdCl2](PF6)2 (Ru(Phen-NPy2)Pd) in good yields via stepwise complexation. In these complexes Ru(II) is coordinated to 1,10-phenanthroline, while Pd(II) is bound to the dpa chelating moiety, as established by NMR spectroscopy and X-ray single crystal analysis. The influence of the position of dpa in the phenanthroline ring on the structural, optical and electrochemical properties of Ru(Phen-NPy2)Pd complexes was studied. The complexes exhibit photoluminescence in argon-saturated MeCN solution with maxima in the range of 615-625 nm, with emission quantum yields ranging from 0.11 to 0.15 for Ru(Phen-NPy2) complexes and from 0.018 to 0.026 for dinuclear Ru(Phen-NPy2)Pd complexes. All the complexes absorb visible light in the range of 370-470 nm with high extinction coefficients and can be considered useful as photocatalysts. The Ru2+/3+ potential in Ru(Phen-NPy2)Pd complexes showed no significant dependence on the dpa position, while the Pd2+/0 reduction potential was significantly lower for Ru(Phen-3NPy2)Pd and Ru(Phen-4NPy2)Pd, than for Ru(Phen-5NPy2)Pd (-0.57 V and -0.72 V vs. Ag/AgCl, KCl(sat.), respectively). The complexes were used as photoactivated precatalysts in Cu-free Sonogashira coupling under blue LEDs (12 W) irradiation. The reaction proceeded roughly three times faster when Ru(Phen-4NPy2)Pd and Ru(Phen-3NPy2)Pd were used as catalyst precursors compared to the mixed catalytic system Ru(bpy)3(PF6)2/(RNPy2)PdCl2.

Application of phosphorus-bridged rigid, bent bis(NHCs) as dipodal ligands in main group and transition metal chemistry.

Phosphorus-bridged rigid, bent bis(N-heterocyclic) carbenes have not been reported, so far, despite having structural features that could make them interesting ligands in coordination and main group element chemistry. In previous reports, we had demonstrated that tuning of σ3- and σ4-phosphorus environments in planarised bis(NHCs) affects electronic properties and can provide additional coordination sites. Herein, we report on first examples of synthesis and conversion of 1,4-diphosphabarrelene-related compounds into rigid bent, doubly P-bridged bis(NHCs). The formation of main group element adducts with substrates from group 13, 14 and 15 illustrates opportunities to access novel scaffolds and to create nonplanar branching points. DFT calculations reveal the new bis(NHCs) to be good candidates as novel soft/hard ligands with up to four coordination sites. The synthesis of a dinuclear Fe(CO)4 complex is demonstrated. The thermal retro-[4 + 2] cycloaddition was theoretically and experimentally explored for a variety of ionic and zwitterionic 1,4-diphosphabarrelenes, and the generation and trapping of a dinuclear Fe(0) bis(NHC) complex with a tricyclic 1σ2,4 σ2-diphosphinine scaffold is presented.

Energetic coordination polymers (ECPs) based on tetrazole N-oxides: green nitrogen-rich energetic complexes of variable dimensions.

In recent years, it has been demonstrated that the energetic properties of many tetrazole-containing compounds can be enhanced through the formation of the corresponding N-oxides. The introduction of N-O groups increases the oxygen balance of tetrazole compounds, while providing additional coordination sites and enriching the coordination modes between tetrazole compounds and metal ions. The introduction of O atoms alters the polarity of the substance from N to N-O, the packing and density increase and therefore the detonation velocity (VD) and pressure (P) also increase. Based on this, energetic coordination polymers (ECPs) with tetrazole N-oxides serving as ligands possess extremely high research value. In this paper, we aim to summarize the existing ECPs based on tetrazole N-oxides briefly and discuss their advantages, emphasizing their excellent stability and application prospects.

Metallacyclosilanes of Calcium, Yttrium, and Iron.

Utilizing a choice of α,ω-oligosilanylene diides, it is possible to synthesize a number of heterocyclosilanes with heteroelements of calcium, yttrium, and iron by metathesis reactions with respective metal halides CaI2, YCl3, and FeBr2. 29Si NMR spectroscopic analysis of the calcacyclosilanes suggests that these compounds retain a strong oligosilanylene dianion character, which is more pronounced than in the analogous magnesacyclosilanes. As the electronegativity of calcium lies between potassium and magnesium, silyl calcium reagents should be considered as building blocks with an attractive reactivity profile. Reaction of a 1,4-oligosilanylene diide with YCl3 gave the five-membered yttracyclosilane as an ate-complex with two chlorides still attached to the yttrium atom. Reaction of the obtained compound with two equivalents of NaCp led to another five-membered yttracyclosilane ate-complex with an yttracene fragment. When using a dianionic oligosilanylene ligand containing a siloxane unit, the siloxane oxygen acted as an additional coordination site for Ca and Y. When the same ligand was used to prepare a cyclic 1-ferra-4-oxatetrasilacyclohexane, an analogous transannular interaction between the iron and oxygen atoms is missing.

A Membrane‐Supported Bifunctional Poly(amidoxime‐ethyleneimine) Network for Enhanced Uranium Extraction from Seawater and Wastewater

Uranium extraction from natural seawater and wastewater are quintessential requirements to supply uninterrupted carbon-free nuclear energy and to prevent potential radiochemical and toxicological effects, respectively. Owing to the complexity and low-concentration uranium of these water samples, the design and synthesis of sorbent materials for uranium extraction with meaningful efficiencies remains a grand challenge. Herein, we reported a novel three-dimensional bifunctional network of hyperbranched poly(amidoxime-ethyleneimine) (PAO-h-PEI) using PEI as the skeleton material via cyanoethylation, crosslinking and then amidoximation. As a result of the synergistic supramolecular strategy, the PAO-h-PEI membrane achieved a remarkable adsorption capacity of 985.7 mg/g for aqueous uranium solution, which was 2.5 folds that of the monofunctional h-PEI membrane (387.6 mg/g). The PAO-h-PEI membrane also exhibited good selectivity towards uranium in the presence of various metal ions, high-content salt, and natural organic matter as well as common anions. According to the XPS and FTIR results, the utilization of amines as the second ligand enhanced uranyl binding by providing additional coordination sites or by interacting with oxime to force N-OH dissociation. The good reusability (adsorption rate of 93% after six adsorption-desorption cycles) and satisfactory adsorption performance in extracting low-concentration uranium in real seawater demonstrate its practicability.

First-In-Human Results on the Biodistribution, Pharmacokinetics, and Dosimetry of [177Lu]Lu-DOTA.SA.FAPi and [177Lu]Lu-DOTAGA.(SA.FAPi)2.

Recently, great interest has been gained regarding fibroblast activation protein (FAP) as an excellent target for theranostics. Several FAP inhibitor molecules such as [68Ga]Ga-labelled FAPI-02, 04, 46, and DOTA.SA.FAPi have been introduced and are highly promising molecular targets from the imaging point of view. FAP inhibitors introduced via bifunctional DOTA and DOTAGA chelators offer the possibility to complex Lutetium-177 due to an additional coordination site, and are suitable for theranostic applications owing to the increased tumor accumulation and prolonged tumor retention time. However, for therapeutic applications, very little has been accomplished, mainly due to residence times of the compounds. In an attempt to develop a promising therapeutic radiopharmaceutical, the present study aimed to evaluate and compare the biodistribution, pharmacokinetics, and dosimetry of [177Lu]Lu-DOTA.SA.FAPi, and [177Lu]Lu-DOTAGA.(SA.FAPi)2 in patients with various cancers. The FAPi agents, [177Lu]Lu-DOTA.SA.FAPi and [177Lu]Lu-DOTAGA.(SA.FAPi)2, were administered in two different groups of patients. Three patients (mean age—50 years) were treated with a median cumulative activity of 2.96 GBq (IQR: 2.2–3 GBq) [177Lu]Lu-DOTA.SA.FAPi and seven (mean age—51 years) were treated with 1.48 GBq (IQR: 0.6–1.5) of [177Lu]Lu-DOTAGA.(SA.FAPi)2. Patients in both the groups underwent serial imaging whole-body planar and SPECT/CT scans that were acquired between 1 h and 168 h post-injection (p.i.). The residence time and absorbed dose estimate in the source organs and tumor were calculated using OLINDA/EXM 2.2 software. Time versus activity graphs were plotted to determine the effective half-life (Te) in the whole body and lesions for both the radiotracers. Physiological uptake of [177Lu]Lu-DOTA.SA.FAPi was observed in the kidneys, colon, pancreas, liver, gall bladder, oral mucosa, lacrimal glands, and urinary bladder contents. Physiological biodistribution of [177Lu]Lu-DOTAGA.(SA.FAPi)2 involved liver, gall bladder, colon, pancreas, kidneys, and urinary bladder contents, lacrimal glands, oral mucosa, and salivary glands. In the [177Lu]Lu-DOTA.SA.FAPi group, the highest absorbed doses were noted in the kidneys (0.618 ± 0.015 Gy/GBq), followed by the colon (right colon: 0.472 Gy/GBq and left colon: 0.430 Gy/GBq). In the [177Lu]Lu-DOTAGA.(SA.FAPi)2 group, the colon received the highest absorbed dose (right colon: 1.160 Gy/GBq and left colon: 2.870 Gy/GBq), and demonstrated a significantly higher mean absorbed dose than [177Lu]Lu-DOTA.SA.FAPi (p < 0.011). [177Lu]Lu-DOTAGA.(SA.FAPi)2 had significantly longer median whole-body Te compared to that of [177Lu]Lu-DOTA.SA.FAPi [46.2 h (IQR: 38.5–70.1) vs. 23.1 h (IQR: 17.8–31.5); p-0.0167]. The Te of tumor lesions was significantly higher for [177Lu]Lu-DOTAGA.(SA.FAPi)2 compared to [177Lu]Lu-DOTA.SA.FAPi [86.6 h (IQR: 34.3–94.6) vs. 14 h (IQR: 12.8–15.5); p-0.0004]. The median absorbed doses to the lesions were 0.603 (IQR: 0.230–1.810) Gy/GBq and 6.70 (IQR: 3.40–49) Gy/GBq dose per cycle in the [177Lu]Lu-DOTA.SA.FAPi, and [177Lu]Lu-DOTAGA.(SA.FAPi)2 groups, respectively. The first clinical dosimetry study demonstrated significantly higher tumor absorbed doses with [177Lu]Lu-DOTAGA.(SA.FAPi)2 compared to [177Lu]Lu-DOTA.SA.FAPi. [177Lu]Lu-DOTAGA.(SA.FAPi)2 is safe and unveiled new frontiers to treat various end-stage cancer patients with a theranostic approach.

Synthesis, Structures, and Fluorescence Properties of Dimeric Aluminum Oxo Clusters

Aluminum is an important component for luminescence. However, the fluorescent aluminum complex with unambiguous structural information is still limited. Herein, we report a series of fluorescence aluminum oxo clusters (AlOCs). By introducing an additional coordination site to the aromatic conjugation ligand, cluster nuclearity increment and fluorescence variation are observed. Al8(OH)2(μ4-O)2(1-NA)2(OEt)16 (AlOC-41, 1-NA = 1-naphthoic acid, OEt = ethanol) is made up of two tetrahedral subunits. By introducing an additional coordination site to the aromatic conjugation ligand, we isolate a high nuclearity compound Al10(μ3-O)2(3-HNA)2(OEt)22 (AlOC-47, 3-HNA = 3-hydroxy-2-naphthoic acid). Correspondingly, their luminescence performance is different (blue fluorescence in AlOC-41 and green in AlOC-47). Present herein is a platform to illustrate the relationship between synthesis, structure, and fluorescence properties.

Self-Assembled Nickel-4 Supramolecular Squares and Assays for HER Electrocatalysts Derived Therefrom.

Solid-state structures find a self-assembled tetrameric nickel cage with carboxylate linkages, [Ni(N2S'O)I(CH3CN)]4 ([Ni-I]40), resulting from sulfur acetylation by sodium iodoacetate of an [NiN2S]22+ dimer in acetonitrile. Various synthetic routes to the tetramer, best described from XRD as a molecular square, were discovered to generate the hexacoordinate nickel units ligated by N2Sthioether, iodide, and two carboxylate oxygens, one of which is the bridge from the adjacent nickel unit in [Ni-I]40. Removal of the four iodides by silver ion precipitation yields an analogous species but with an additional vacant coordination site, [Ni-Solv]+, a cation but with coordinated solvent molecules. This also recrystallizes as the tetramer [Ni-Solv]44+. In solution, dissociation into the (presumed) monomer occurs, with coordinating solvents occupying the vacant site [Ni(N2S'O)I(solv)]0, ([Ni-I]0). Hydrodynamic radii determined from 1H DOSY NMR data suggest that monomeric units are present as well in CD2Cl2. Evans method magnetism values are consistent with triplet spin states in polar solvents; however, in CD2Cl2 solutions no paramagnetism is evident. The abilities of [Ni-I]40 and [Ni-Solv]44+ to serve as sources of electrocatalysts, or precatalysts, for the hydrogen evolution reaction (HER) were explored. Cyclic voltammetry responses and bulk coulometry with gas chromatographic analysis demonstrated that a stronger acid, trifluoroacetic acid, as a proton source resulted in H2 production from both electroprecatalysts; however, electrocatalysis developed primarily from uncharacterized deposits on the electrode. With acetic acid as a proton source, the major contribution to the HER is from homogeneous electrocatalysis. Overpotentials of 490 mV were obtained for both the solution-phase [Ni-I]0 and [Ni-Solv]+. While the electrocatalyst derived from [Ni-Solv]+ has a substantially higher TOF (102 s-1) than [Ni-I]0 (19 s-1), it has a shorter catalytically active lifespan (4 h) in comparison to [Ni-I]0 (>18 h).

Effects of raw particle size and annealing on microstructure, electrical and mechanical behaviors of ZnO-based varistors

In this paper, the effect of the raw particle size and the annealing process on the compositions, microstructure, mechanical, thermal, and electrical properties of ZnO varistors was investigated using X-ray diffraction, infrared, X-ray photoelectron spectroscopy, scanning electron microscopy, electric field–current density, capacitance–voltage, mechanical, and thermal expansion measurements. Furthermore, the ZnO grain growth mechanism during the annealing process was discussed in detail. Results show that when the raw particle size equaled 90 nm and sintering was performed at 1100 °C for 2 h, the obtained ZnO-based varistors possessed excellent mechanical, thermal, and electrical properties; the E1mA, α, JL, and K values were 1015.3 V mm–1, 37.98, 2.45 μA cm–2, and 1.37, respectively, due to the highest bulk density and the finest uniform particle size distribution. When annealing occurred at 300 °C for three times, values of σf, KIC, E1mA, α, JL, and K reached 175.35 MPa, 1.96 MPa m1/2, 1180.2 V mm–1, 43.58, 2.15 μA cm–2, and 1.2, indicating improvements of approximately 14.7%, 4%, 16.2%, 14.7%, − 12.2%, and 11.11% compared with those of the non-annealed ZnO-based varistors, respectively, being due to the improved uniformity of grain size distribution and the re-distribution of donor Al3+ and Y3+ in the ZnO crystal and grain boundary. The annealing process lead to the transformation of Sb3+ to Sb5+ in the ZnO crystal, which could generate two additional coordination sites. The newly generated sites could combine with O2- in other crystals to increase the grain growth, resulting in clear grain growth on the surface, improved grain size distribution, and regular grain shape in the interior of ZnO-based varistors.

Cationic Rhodium(I)‐Catalyzed Carbonylative [2+2+1] Cycloaddition of Diynes

AbstractWe describe Rh(I)‐catalyzed carbonylative [2+2+1] cycloaddition reactions of diynes with CO to give cyclopentadienone derivatives (CPDs). Previous reports on the use of neutral rhodium(I) complexes, such as [RhCl(cod)]2 and RhCl(PPh3)3, indicate that no CPD products are formed or that they are produced in low yields, even at elevated temperatures. The reaction described herein, which uses a cationic rhodium(I) complex, [Rh(cod)2]BF4, as a catalyst, proceeds smoothly at room temperature to give cyclopentadienone derivatives. The key to this is the use the cationic rhodium(I) complex as a catalyst, which produces an additional coordination site on the rhodium for the substrate (a diyne) to approach, than neutral rhodium complexes.

Dye/metal ion-based chemosensing ensemble towards l-histidine and l-lysine determination in water via different optical responses.

In this study, a novel simple type of label-free, ultra-sensitive, and highly selective UV-Vis absorption and naked-eye detection of histidine (His) and lysine (Lys) using a dye/metal ion ensemble is developed. The outcoming high sensitivity and selectivity for histidine and lysine were attained by changing the metal ions. The indicator is released due to its displacement from the murexide (Mure)/Cu2+ complex by histidine and the change in absorbance may be due to the further complexation of lysine with the additional coordination sites present in the zinc atom of Mure/Zn2+ complex. The label-free chemosensor provided sensitive and selective detection of l-histidine and l-lysine with detection limits of 9.1 and 9.4nmolL-1, respectively. The protocol especially offers high selectivity for the determination of His and Lys among amino acids found in human urine samples. Furthermore, INHIBIT and NAND molecular logic gates were obtained using chemical inputs and UV-Vis absorbance signal output.

Diverse Approaches for Enantioselective C-H Functionalization Reactions Using Group 9 Cpx MIII Catalysts.

Transition-metal-catalyzed C-H functionalization reactions with Cp*MIII catalysts (M=Co, Rh, Ir) have found a wide variety of applications in organic synthesis. Albeit the intrinsic difficulties in achieving catalytic stereocontrol using these catalysts due to their lack of additional coordination sites for external chiral ligands and the conformational flexibility of the Cp ligand, catalytic enantioselective C-H functionalization reactions using the Group 9 metal triad with Cp-type ligands have been intensively studied since 2012. In this minireview, the progress in these reactions according to the type of the chiral catalyst used are summarized and discussed. The development of chiral Cpx ligands the metal complexes thereof, artificial metalloenzymes, chiral carboxylate-assisted enantioselective C-H activations, enantioselective alkylations assisted by chiral carboxylic acids or chiral sulfonates, and chiral transient directing groups are discussed.

Oxyaapa: A Picolinate-Based Ligand with Five Oxygen Donors that Strongly Chelates Lanthanides.

Coordination compounds of the lanthanide ions (Ln3+) have important applications in medicine due to their photophysical, magnetic, and nuclear properties. To effectively use the Ln3+ ions for these applications, chelators that stably bind them in vivo are required to prevent toxic side effects that arise from localization of these ions in off-target tissue. In this study, two new picolinate-containing chelators, a heptadentate ligand OxyMepa and a nonadentate ligand Oxyaapa, were prepared, and their coordination chemistries with Ln3+ ions were thoroughly investigated to evaluate their suitability for use in medicine. Protonation constants of these chelators and stability constants for their Ln3+ complexes were evaluated. Both ligands exhibit a thermodynamic preference for small Ln3+ ions. The log KLuL = 12.21 and 21.49 for OxyMepa and Oxyaapa, respectively, indicating that the nonadentate Oxyaapa forms complexes of significantly higher stability than the heptadentate OxyMepa. X-ray crystal structures of the Lu3+ complexes were obtained, revealing that Oxyaapa saturates the coordination sphere of Lu3+, whereas OxyMepa leaves an additional open coordination site for a bound water ligand. Solution structural studies carried out with NMR spectroscopy revealed the presence of two possible conformations for these ligands upon Ln3+ binding. Density functional theory (DFT) calculations were applied to probe the geometries and energies of these conformations. Energy differences obtained by DFT are small but consistent with experimental data. The photophysical properties of the Eu3+ and Tb3+ complexes were characterized, revealing modest photoluminescent quantum yields of <2%. Luminescence lifetime measurements were carried out in H2O and D2O, showing that the Eu3+ and Tb3+ complexes of OxyMepa have two inner-sphere water ligands, whereas the Eu3+ and Tb3+ complexes of Oxyaapa have zero. Lastly, variable-temperature 17O NMR spectroscopy was performed for the Gd-OxyMepa complex to determine its water exchange rate constant of kex298 = (2.8 ± 0.1) × 106 s-1. Collectively, this comprehensive characterization of these Ln3+ chelators provides valuable insight for their potential use in medicine and garners additional understanding of ligand design strategies.

Boosting the Loading of Metal Single Atoms via a Bioconcentration Strategy.

Increasing the mass loading of transition metal single atoms coordinated with nitrogen in carbon-based materials (M-N-C) is still challenging. Herein, inspired by the bioconcentration effect in the living body, a biochemistry strategy for the synthesis of Fe-N-C single atoms is demonstrated. Through introducing ferrous glycinate into the growth of fungus, the Fe atoms are bioconcentrated in hyphae. The highly dispersed Fe-N-C single atoms in hyphae-derived carbon fibers (labeled as Fe-N-C SA/HCF) are prepared by the pyrolysis of Fe-riched hyphae. In the bioconcentration process, the uptake of Fe ions by hyphae promotes the secretion of glutathione and ferritin, which provides additional coordination sites for Fe ions. Accordingly, the mass content of Fe in bioconcentrated Fe-N-C SA/HCF reaches 4.8%, which is 5.3 times larger than that of the sample prepared by the conventional pyrolysis process. The present bioconcentration strategy is further extended to the preparation of Co, Ni, and Mn single atoms. Owing to the high content of Fe-N-C single atoms, Fe-N-C SA/HCF shows the onset potential (Eonset ) of 0.931 V versus reversible hydrogen electrode (RHE) and half-wave potential (E1/2 ) of 0.802 V versus RHE in oxygen reduction reaction measurements, which is comparable to the commercial Pt/C catalysts.

Singlet oxygen stimulus for switchable functional organic cages.

Molecular cages 1a and 2a incorporating a 9,10-diphenylanthracene (DPA) chromophore were synthesized through a templated ring-closure metathesis approach that allows variation in cavity size through the introduction of up to three different pillars. Reversible Diels–Alder reaction between the DPA moiety and photogenerated singlet oxygen smoothly converted 1a and 2a to the corresponding endoperoxide cages 1b and 2b, which are converted back to 1a and 2a upon heating. Endoperoxide formation constitutes a reversible covalent signal that combines structural changes in the interior of the cage with introduction of two additional coordination sites. This results in a large modulation of the binding ability of the receptors attributed to a change in the location of the preferred binding site owing to the added coordination by the endoperoxide oxygen lone pairs. Cages 1a and 2a form complexes with sodium and cesium whose association constants are modified by 4–20 fold for Na+ and 200–450 fold for Cs+ upon conversion to 1b and 2b. DFT calculations show that in the anthracene form, cages 1a and 2a can bind 2 metal cations in their periphery so that each cation is coordinated by 4 oxygens and one amine nitrogen, whereas the endoperoxide cages 1b and 2b bind cations centrally in a geometry that favors coordination to the endoperoxide oxygens.

Efficient ensemble and IDA system based on the metal binding motif for highly sensitive and selective detection and determination of carbonate and citrate ions

ABSTRACTHerein, we have reported a novel naked eye detection method which is based on the analyte competing for a metal reporter with a chromogenic indicator. This assay is based on the highly specific interaction between the anions and the metal ions and murexide (Mure) probe in a competition assay format. The resulting high sensitivity and selectivity for citrate and carbonate were achieved by changing the metal ions. The indicator is set free due to its displacement from the Mure/Cu2+ complex by citrate (Cit3ˉ) and the change in absorbance may be due to the further complexation of carbonate (CO32ˉ) with the additional coordination sites present in the zinc atom of Mure/Zn2+ complex. The dye-based ensemble systems are expected to be a potential and practical way for the detection of nanomolar concentrations of analytes in 100% aqueous solutions. The chemosensor enabled sensitive and selective detection of Cit3ˉ and CO32ˉ with detection limits of 19.1 and 9.4 nmol L−1, respectively. These systems are simple in design, fast in operation and are more promising than previous methods. This novel method eliminated the need for separation processes, chemical modifications, organic cosolvents, and sophisticated instrumentations. Chiefly, the protocol offers high selectivity for the determination of Cit3ˉ and CO32ˉ among anions found in human urine samples in the presence of some biological species, including K+, Mg2+, Fe3+, Ca2+, Zn2+, Na+, glucose, urea, uric acid and ascorbic acid. Further, NAND and INHIBIT molecular logic gates were obtained using chemical inputs and UV–Vis absorbance signal as the output.

Site-Specific Metal Chelation Facilitates the Unveiling of Hidden Coordination Sites in an FeII/FeIII-Seamed Pyrogallol[4]arene Nanocapsule.

Under suitable conditions, C-alkylpyrogallol[4]arenes (PgCs) arrange into spherical metal-organic nanocapsules (MONCs) upon coordination to appropriate metal ions. Herein we present the synthesis and structural characterization of a novel FeII/FeIII-seamed MONC, as well as studies related to its electrochemical and magnetic behaviors. Unlike other MONCs that are assembled through 24 metal ions, this nanocapsule comprises 32 Fe ions, uncovering 8 additional coordination sites situated between the constituent PgC subunits. The FeII ions are likely formed by the reducing ability of DMF used in the synthesis, representing a novel synthetic route toward polynuclear mixed-valence MONCs.