Active Seafloor Spreading Research Articles

From Symmetric Rifting to Asymmetric Spreading—Insights Into Back‐Arc Formation in the Central Mariana Trough

AbstractThe Mariana Trough is the youngest back‐arc basin in a series of basins and arcs that developed behind the Mariana subduction zone in the western Pacific. Active seafloor spreading is ongoing at a spreading axis close to the Mariana Arc, resulting in a pronounced asymmetric configuration (double rate to the west 2:1) at 17°N. The formation of back‐arc basins is controlled by the subducting slab, which regulates the temporal development of mantle flow, entrainment of fluids, and hydrous melts together with the magma generation. To better understand the formation process of back‐arc basin asymmetry in the central Mariana Trough, we combined 2‐D P‐wave traveltime tomography results with high‐resolution bathymetric data. Here, we show that the crust in the central Mariana Trough is 6.5–9.5 km thick, which is unusually thick for oceanic crust. While the lower crust exhibits average seismic velocities of 6.5–7.2 km/s, high‐velocity anomalies occur at the margins of the Mariana Trough, indicating that magmatic accretion was affected by hydrous melting during rifting. While the Mariana Trough developed from a rather symmetric rifting (0.89:1) to a strongly asymmetric seafloor spreading stage (5.33:1), the contribution of hydrous melts declined and the opening direction changed at ∼5 Ma. Asymmetric basin opening is potentially driven by the far‐field stress effect of the subduction zones on the western boundary of the Philippine Sea Plate.

A PCR-Based Survey of Methane-Cycling Archaea in Methane-Soaked Subsurface Sediments of Guaymas Basin, Gulf of California.

The Guaymas Basin in the Gulf of California is characterized by active seafloor spreading, the rapid deposition of organic-rich sediments, steep geothermal gradients, and abundant methane of mixed thermogenic and microbial origin. Subsurface sediment samples from eight drilling sites with distinct geochemical and thermal profiles were selected for DNA extraction and PCR amplification to explore the diversity of methane-cycling archaea in the Guaymas Basin subsurface. We performed PCR amplifications with general (mcrIRD), and ANME-1 specific primers that target the alpha (α) subunit of methyl coenzyme M reductase (mcrA). Diverse ANME-1 lineages associated with anaerobic methane oxidation were detected in seven out of the eight drilling sites, preferentially around the methane-sulfate interface, and in several cases, showed preferences for specific sampling sites. Phylogenetically, most ANME-1 sequences from the Guaymas Basin subsurface were related to marine mud volcanoes, seep sites, and the shallow marine subsurface. The most frequently recovered methanogenic phylotypes were closely affiliated with the hyperthermophilic Methanocaldococcaceae, and found at the hydrothermally influenced Ringvent site. The coolest drilling site, in the northern axial trough of Guaymas Basin, yielded the greatest diversity in methanogen lineages. Our survey indicates the potential for extensive microbial methane cycling within subsurface sediments of Guaymas Basin.

The Guaymas Basin – A hot spot for hydrothermal generation and anaerobic microbial degradation of hydrocarbons

Guaymas Basin is a young marginal rift basin in the Gulf of California characterized by active seafloor spreading, rapid deposition of organic-rich sediments, and steep geothermal gradients where sedimentary organic material of photosynthetic origin turns into hydrocarbons - potential microbial substrates. After introducing the sources of hydrocarbons in the subsurface, this short overview discusses the phylogenetic diversity, temperature range and occurrence patterns of novel alkane-oxidizing bacteria and archaea in the hydrothermal sediments of Guaymas Basin. Many of these alkane-degrading specialists function as syntrophic consortia, where sulfate-reducing bacteria accept electron from methane- or alkane-oxidizing archaea. As a source of metagenomes, enrichments, and cultures of these methodologically and conceptually challenging microorganisms, Guaymas Basin stands out as an indispensable field site that has consistently catalyzed new insights into the microbiology of anaerobic hydrocarbon oxidation and assimilation.

Anabolic and Catabolic Microbial Activity in Hydrocarbon-rich Sediments of Guaymas Basin

Guaymas Basin, located in the Gulf of California, Mexico, is a young marginal ocean basin with high sedimentation rates of >1 mm/year, active seafloor spreading, and steep geothermal gradients in its sediment. It hosts a unique microbial subseafloor biosphere as these conditions lead to thermal cracking of sedimentary organic matter and the production of bioavailable organic carbon compounds and hydrocarbons already at shallow depths. The abundance and diversity of potential microbial substrates raise the question of which substrates are being used for catabolic and anabolic microbial metabolism. We thus analyzed the microbial uptake of hydrocarbons and inorganic nitrogen using nanoscale secondary ion mass spectrometry (NanoSIMS) analysis after incubation with stable-isotope labeled substrates. Incubations were carried out with samples from two International Ocean Discovery Program (IODP) Exp. 385 drill sites. Site U1545 is characterized by undisturbed sedimentary strata and a temperature gradient of 225°C/km, whereas Site U1546 has experienced a sill intrusion at greater depth, below the cored interval. The intrusion led to temporary heating of the sediment, but a temperature gradient of 221°C/km indicates thermal equilibration with the surrounding sediment since sill emplacement. Incubations were carried out with 13C-benzene + 2H-hexadecane + 15NH4Cl or 13C-methane + 15NH4Cl at in-situ temperature (4-62°C) and pressure (25 MPa) for 42 days. Additionally, sulfate reduction rates (SRR) were measured by incubating the samples with four aliphatic hydrocarbons + four aromatic hydrocarbons or methane and radioisotope-labeled 35SO42- for 10 days, also at in-situ temperature and pressure. The NanoSIMS analyses reveal that a few samples showed detectable microbial assimilation of hydrocarbons. Nitrogen was significantly assimilated in some samples incubated with methane. The assimilation mostly occurred in samples from near the seafloor (2 and 44 meter below seafloor (mbsf)). Our results indicate that anaerobic microorganisms in Guaymas Basin take up measurable amounts of hydrocarbons and inorganic nitrogen even in the relatively short incubation time of 42 days. The results of the SRR measurements indicate that a mixture of hydrocarbons and methane increases the SRR in samples from near the seafloor (2 mbsf) and around the sulfate-methane transition zone (44 and 55 mbsf) but not in samples from greater depths. Our results show that anaerobic microorganisms in Guaymas Basin can use hydrocarbons for anabolic and catabolic metabolism in this extreme environment. Given the high abundance of various carbon compounds, nitrogen appears to be a limiting factor for cellular growth.

Thermal Selection of Microbial Communities and Preservation of Microbial Function in Guaymas Basin Hydrothermal Sediments.

The Guaymas Basin in the Gulf of California is characterized by active seafloor spreading, hydrothermal activity, and organic matter accumulation on the seafloor due to high sedimentation rates. In the hydrothermal sediments of Guaymas Basin, microbial community compositions and coexistence patterns change across steep gradients of temperature, potential carbon sources, and electron acceptors. Nonmetric multidimensional scaling and guanine-cytosine percentage analyses reveal that the bacterial and archaeal communities adjust compositionally to their local temperature regime. Functional inference using PICRUSt shows that microbial communities consistently maintain their predicted biogeochemical functions in different sediments. Phylogenetic profiling shows that microbial communities retain distinct sulfate-reducing, methane-oxidizing, or heterotrophic lineages within specific temperature windows. The preservation of similar biogeochemical functions across microbial lineages with different temperature adaptations stabilizes the hydrothermal microbial community in a highly dynamic environment. IMPORTANCE Hydrothermal vent sites have been widely studied to investigate novel bacteria and archaea that are adapted to these extreme environments. However, community-level analyses of hydrothermal microbial ecosystems look beyond the presence and activity of particular types of microbes and examine to what extent the entire community of bacteria and archaea is adapted to hydrothermal conditions; these include elevated temperatures, hydrothermally generated carbon sources, and inorganic electron donors and acceptors that are characteristic for hydrothermal environments. In our case study of bacterial and archaeal communities in hydrothermal sediments of Guaymas Basin, we found that sequence-inferred microbial function was maintained in differently structured bacterial and archaeal communities across different samples and thermal regimes. The resulting preservation of biogeochemical functions across thermal gradients is an important factor in explaining the consistency of the microbial core community in the dynamic sedimentary environment of Guaymas Basin.

Highly heterogeneous mantle caused by recycling of oceanic lithosphere from the mantle transition zone

Geochemical heterogeneities observed in the mantle are usually attributed to recycling of oceanic lithosphere through subduction. However, it remains hotly debated where recycled material stagnates, and how quickly it can be liberated back to surface. This knowledge gap hinders our understanding of mantle circulation and the chemical evolution of the Earth. Here we address these questions using a combination of geochronology and geochemistry from South China Sea (SCS) seamounts. The Shixingbei seamount lavas formed during active seafloor spreading at c. 19.1 Ma show limited geochemical variability, whereas the Zhenbei-Huangyan seamount chain formed during the post-spreading stage at c. 7.8 Ma and displays a wide range of compositions. However, melt inclusions in olivine and plagioclase from the Zhenbei-Huangyan basalts show considerably greater isotopic variability than seen in the whole rock compositions of both the SCS syn- and post-spreading lavas. A previously unidentified third mantle source component (FOZO) revealed by olivine-hosted melt inclusions along with both depleted (DMM) and enriched (EMII) mantle components is required in the source region to explain the observed isotopic and chemical variability. On the basis of our results, the age of the recycled ocean crust and sediments in this region are estimated to be c. 120 – 350 Ma. We infer that these enriched components in the SCS lavas come from the mantle transition zone. Variations in mantle source heterogeneity coupled with melting process control spatial–temporal (spreading vs. post-spreading stage) geochemical variations of lavas from the SCS and surrounding areas. Together with the results from published studies, we propose that marginal basins are one of the major locations on Earth where oceanic and/or continental lithosphere is transferred into the upper mantle and transition zone, representing an important source of upper mantle heterogeneity. We provide a simple conceptual model linking plate subduction and upper mantle heterogeneity and the volcanism in the SCS and surrounding areas.

Baffin Bay Composite Tectono-Sedimentary Element

Abstract Baffin Bay formed as a result of continental extension during the Cretaceous, which was followed by seafloor spreading and associated plate drift during the early to middle Cenozoic. The formation of an oceanic basin in the central part of Baffin Bay may have begun from about 62 Ma in tandem with the Labrador Sea opening, but the early spreading phase is controversial. Plate-kinematic models suggest that from Late Paleocene the direction of seafloor spreading changed to north–south, generating strike-slip movements along the transform lineaments, e.g. the Ungava Fault Zone and the Bower Fracture Zone, and structural complexity along the margins of Baffin Bay. The Baffin Bay Composite Tectono-Sedimentary Element (CTSE) represents a 3–7-km-thick Cenozoic sedimentary and volcanic succession that was deposited over oceanic and rifted continental crust since active seafloor spreading began. The CTSE is subdivided into 5 seismic mega-units that have been identified and mapped using a regional seismic grid tied to wells and core sites. Thick clastic wedges of likely Late Paleocene to Early Oligocene age (mega-units E and D2) were deposited within basins floored by newly formed oceanic crust, transitional crust, volcanic extrusives and former continental rift basins undergoing subsidence. The middle–late Cenozoic is characterized by fluvial–deltaic sedimentary systems, hemipelagic strata and aggradational sediment bodies deposited under the influence of ocean currents (mega-units D1, C and B). The late Pliocene to Pleistocene interval (mega-unit A) displays major shelf margin progradation associated with ice-sheet advance–retreat cycles resulting in the accumulation of trough-mouth fans and mass-wasting deposits in the oceanic basin. The Baffin Bay CTSE has not produced discoveries, although a hydrocarbon potential may be associated with Paleocene source rocks. Recent data have improved the geological understanding of Baffin Bay, yet large data and knowledge gaps remain.

High-resolution multibeam bathymetry of the northern Mid-Atlantic Ridge at 45–46° N: the Moytirra hydrothermal field

ABSTRACT This work presents a new high-resolution multibeam bathymetric map of a segment of active deep sea-floor spreading in the Atlantic Ocean, the northern Mid-Atlantic Ridge (MAR) at 45–46º N. New high-resolution bathymetry data were acquired using an Atlas multibeam echosounder onboard the research vessel Sarmiento de Gamboa during the EXPLOSEA-2 survey in 2019. The final map of the MAR (50 m cell grid size) at the original scale of 1:200,000 shows a segment of 140 × 35 km of the MAR, at water depths from 715 to 3700 m. This new high-resolution bathymetric map allows to better defining the submarine morphology of the Moytirra hydrothermal active field, the only high-temperature field identified between the Azores Archipelago (Portugal) and Iceland. ROV submarine observations reaching the deepest part of the system for the first time show giant anhydrite-sulfide chimneys up to 20 m high, active strong black smokers and polymetallic massive sulfides.

Gulf of Aden spreading does not conform to triple-junction formation

AbstractThe Gulf of Aden represents an evolving example of a juvenile ocean system and is considered the most evolved rift arm of the Afar triple junction. We have undertaken analysis of recent coupled satellite and marine potential-field data to understand the first-order crustal architecture along the entire length of the gulf. Our interpretation suggests the Gulf of Aden has three domains with distinct free-air gravity and magnetic characteristics. These domains record a progression from active seafloor spreading in the eastern domain, through isolated and discontinuous spreading segments in the central domain, to active continental rifting in the western domain immediately adjacent to the Afar triple junction. Forward models suggest the presence of transitional crust, which displays linear magnetic stripe–like anomalies that bound oceanic stripes in the central domain and covering the majority of the western domain. Magnetic anomalies differ from magnetic stripes sensu stricto because they are discontinuous and cannot be correlated along the length of the gulf. Detection of northwest-southeast extension in the central domain based on magnetic stripe orientation is inconsistent with the regional northeast-southwest extension. Our observations reflect heterogeneous opening of the Gulf of Aden basins, in which spreading is migrating toward Afar as a series of isolated spreading segments, rather than initiating at the junction as proposed by classical plate-tectonic theory. This mechanism of ocean initiation is inconsistent with transtensional models that involve wholesale tearing of continental crust and contradicts conceptual models that rely on the Afar plume in initiating or driving the extension.

High heat flow and ocean acidification at a nascent rift in the northern Gulf of California

The prevailing tectonic setting in the Gulf California suggests the presence of an undetermined number of short spreading centres with associated hydrothermal systems. However, to date, active seafloor spreading phenomena have been documented in only three of the eight tectonically active basins. Here we report heat flow values as high as 15,436 mW m−2 in two of the northernmost basins of the Gulf of California, providing evidence of intense hydrothermal activity associated with the transition from continental rifting to seafloor spreading. The mean heat flow for the Wagner and Consag basins area is 1,875 mW m−2, more than 15 times higher than the mean value for oceanic crust (105.4 mW m−2). Additional evidence for vigorous hydrothermal circulation and a shallow heat source includes intense gas discharge (CO2 and CH4), widespread low pH (average 7.7), locally high 222Rn concentrations in the bottom water and a high extent of organic matter maturation in the sediments.

The origin and geochemical evolution of the Woodlark Rift of Papua New Guinea

Geochemical, isotopic, and geochronologic data for exhumed rocks in the Woodlark Rift of Papua New Guinea (PNG) allow a tectonic link to be established with the Late Cretaceous Whitsunday Volcanic Province (WVP) of northeastern Australia. Most of the metamorphic rocks in the Woodlark Rift have Nd isotopic compositions (εNd=+1.7 to +6.2) similar to the Nd isotopic compositions of rocks in the WVP (εNd=+1.3 to +6.6; Ewart et al., 1992), and contain inherited zircons with 90 to 100Ma U–Pb ages that overlap the timing of magmatism in the WVP. None of the metamorphic rocks in the Woodlark Rift have the highly evolved Hf and Nd isotopic compositions expected of ancient continental crust. Magmas were erupted in the WVP during the middle Cretaceous as eastern Gondwana was rifted apart. The protoliths of felsic and intermediate metamorphic rocks in the Woodlark Rift are interpreted to be related to the magmatic products produced during this Cretaceous rifting event. Some mafic metamorphic rocks exposed in the western Woodlark Rift (eclogites and amphibolites) are not related to the WVP and instead could have originated as basaltic lavas crystallized from mantle melts at (U)HP depths in the Late Cenozoic, or as fragments of Mesozoic aged oceanic lithosphere.Isotopic and elemental comparisons between basement gneisses and Quaternary felsic volcanic rocks demonstrate that felsic lavas in the D'Entrecasteaux Islands did not form solely from partial melting of metamorphic rocks during exhumation. Instead, the isotopic compositions and geochemistry of Quaternary felsic volcanic rocks indicate a significant contribution from the partial melting of the mantle in this region. When combined with geophysical data for the western Woodlark Rift, this suggests that future seafloor spreading will commence south of Fergusson Island, and west of the present-day active seafloor spreading rift tip.

Earthquake source parameters for the 2010 western Gulf of Aden rifting episode

SUMMARY On 2010 November 14, an intense swarm of earthquakes began in the western Gulf of Aden. Within a 48-hr period, 82 earthquakes with magnitudes between 4.5 and 5.5 were reported along an ∼80-km-long segment of the east–west trending Aden Ridge, making this swarm one of the largest ever observed in an extensional oceanic setting. In this study, we calculate centroid-moment-tensor solutions for 110 earthquakes that occurred between 2010 November and 2011 April. Over 80 per cent of the cumulative seismic moment results from earthquakes that occurred within 1 week of the onset of the swarm. We find that this sequence has a b-value of ∼1.6 and is dominated by normal-faulting earthquakes that, early in the swarm, migrate westwards with time. These earthquakes are located in rhombic basins along a section of the ridge that was previously characterized by low levels of seismicity and a lack of recent volcanism on the seafloor. Body-wave modelling demonstrates that the events occur in the top 2–3 km of the crust. Nodal planes of the normal-faulting earthquakes are consistent with previously mapped faults in the axial valley. A small number of strike-slip earthquakes observed between two basins near 44°E, where the axial valley changes orientation, depth and width, likely indicate the presence of an incipient transform fault and the early stages of ridge-transform segmentation. The direction of extension accommodated by the earthquakes is intermediate between the rift orthogonal and the direction of relative motion between the Arabian and Somalian plates, consistent with the oblique style of rifting occurring along the slow-spreading Aden Ridge. The 2010 swarm shares many characteristics with dyke-induced rifting episodes from both oceanic and continental settings. We conclude that the 2010 swarm represents the seismic component of an undersea magmatic rifting episode along the nascent Aden Ridge, and attribute the large size of the earthquakes to the combined effects of the slow spreading rate, relatively thick crust and recent quiescence. We estimate that the rifting episode was caused by dyke intrusions that propagated laterally for 12–18 hr, accommodating ∼1–14 m of opening or ∼85–800 yr of spreading along this section of the ridge. Our findings demonstrate the westward propagation of active seafloor spreading into this section of the western Gulf of Aden and illustrate that deformation at the onset of seafloor spreading may be accommodated by discrete episodes of faulting and magmatism. A comparison with similar sequences on land suggests that the 2010 episode may be only the first of several dyke-induced rifting episodes to occur in the western Gulf of Aden.

Crustal structure of a rifted oceanic core complex and its conjugate side at the MAR at 5°S: implications for melt extraction during detachment faulting and core complex formation

We present results of a seismic refraction experiment which determines the crustal and upper-mantle structure of an oceanic core complex (OCC) and its conjugate side located south of the 5°S ridge–transform intersection at the Mid-Atlantic Ridge. The core complex with a corrugated surface has been split by a change in location of active seafloor spreading, resulting in two massifs on either side of the current spreading axis. We applied a joint tomographic inversion of wide-angle reflected and refracted phases for five intersecting seismic profiles. The obtained velocity models are used to constrain the magmatic evolution of the core complex from the analysis of seismic layer 3 and crustal thickness. An abrupt increase of crustal velocities at shallow depth coincides with the onset of the seafloor corrugations at the exposed footwall. The observed velocity structure is consistent with the presence of gabbros directly beneath the corrugated fault surface. The thickness of the high-velocity body is constrained by PmP reflections to vary along and across axis between <3 and 5 km. The thickest crust is associated with the central phase of detachment faulting at the higher-elevated northern portion of the massif. Beneath the breakaway of the OCC the crust is 2.5 km thick and reveals significantly lower velocities. This implies that the fault initially exhumed low-velocity material overlying the gabbro plutons. In contrast, crust formed at the conjugate side during OCC formation is characterized by an up to 2-km-thick seismic layer 2 overlying a 1.7-km-thick seismic layer 3. Obtained upper-mantle velocities range from 7.3 to 7.9 km s−1 and seem to increase with distance from the median valley. However, velocities of 7.3–7.5 km s−1 beneath the older portions of the OCC may derive from deep fluid circulation and related hydrothermal alteration, which may likely be facilitated by the subsequent rifting. Our velocity models reveal a strongly asymmetric velocity structure across the ridge axis, associated with the accretion of gabbros into the footwall of the detachment fault and upper-crustal portions concentrated at the conjugate side. Our results do not support a substantial increase in the axial ridge's melt supply related to the final phase of detachment faulting. Hence, the footwall rifting at 5°S may be a generic mechanism of detachment termination under very low melt conditions, as predicted by recent numerical models of Tucholke et al.

Late Oligocene rapid transformations in the South China Sea

Lithobiostratigraphic data indicate that the double reflectors on the seismic profile through Ocean Drilling Program (ODP) Site 1148 represent two unconformities that coincide, respectively, with the lower/upper Oligocene boundary at ∼488 mcd, and Oligocene–Miocene boundary at 460 mcd. Two other unconformities, at ∼478 and 472 mcd, respectively, were also identified within the upper Oligocene section. Together they erased a sediment record of about 3 Ma from this locality in a period of very active seafloor spreading. The existence of 32.8 Ma marine sediment at the terminated depth (850 mcd) indicates that the initial breakup of the South China Sea (SCS) was probably during 34–33 Ma, close to the Eocene–Oligocene boundary. High sedimentation rates of 60–115 m/my from the much expanded, >350 m lower Oligocene section resulted from rifting and rapid subsidence between 33 and 29 Ma. The mid-Oligocene unconformity at ∼28.5 Ma, which also occurred in many parts of the Indo-West Pacific region, was probably related to a significant uplift of the Himalayan-Tibetan Plateau to the west and the initial collision between Indonesia and Australia in the south. A narrowed Indonesian seaway may have accounted for the late Oligocene warming and chalk deposition in the northern South China Sea including the Site 1148 locality. The unconformities and slumps near the Oligocene–Miocene boundary indicate a very unstable tectonic regime, probably corresponding to changes in the rotation of different land blocks and the seafloor spreading ridge from nearly E–W to NE–SW, as recognized earlier at magnetic Anomaly 7. This 25 Ma event also saw the first New Guinea terrane docking at the northern Australian craton. The low sedimentation rate of ∼15 m/my in the early to middle Miocene may correspond to another period of rapid seafloor spreading and rapid widespread subsidence that effectively caused sediment source areas to retreat with a rapidly rising sea level. The isostatic nature of these late Oligocene unconformities and slumps with several major collision-uplift events indicate that the rapid changes in the early evolutionary history of the South China Sea were mainly responding to regional tectonic reconfiguration including the uplift-driven southeast extrusion of the Indochina subcontinent.

Regional seismic wave propagation (Lg and Sn) and Pn attenuation in the Arabian Plate and surrounding regions

Continuous recordings of 17 broadband and short-period digital seismic stations from a newly established seismological network in Saudi Arabia, along with digital recordings from the broadband stations of the GSN, MEDNET, GEOFON, a temporary array in Saudi Arabia, and temporary short period stations in Oman, were analysed to study the lithospheric structure of the Arabian Plate and surrounding regions. The Arabian Plate is surrounded by a variety of types of plate boundaries: continental collision (Zagros Belt and Bitlis Suture), continental transform (Dead Sea fault system), young seafloor spreading (Red Sea and the Gulf of Aden) and oceanic transform (Owen fracture zone). Also, there are many intraplate Cenozoic processes such as volcanic eruptions, faulting and folding that are taking place. We used this massive waveform database of more than 6200 regional seismograms to map zones of blockage, inefficient and efficient propagation of the Lg and Sn phases in the Middle East and East Africa. We observed Lg blockage across the Bitlis Suture and the Zagros fold and thrust belt, corresponding to the boundary between the Arabian and Eurasian plates. This is probably due to a major lateral change in the Lg crustal waveguide. We also observed inefficient Lg propagation along the Oman mountains. Blockage and inefficient Sn propagation is observed along and for a considerable distance to the east of the Dead Sea fault system and in the northern portion of the Arabian Plate (south of the Bitlis Suture). These mapped zones of high Sn attenuation, moreover, closely coincide with extensive Neogene and Quaternary volcanic activity. We have also carefully mapped the boundaries of the Sn blockage within the Turkish and Iranian plateaus. Furthermore, we observed Sn blockage across the Owen fracture zone and across some segments of the Red Sea. These regions of high Sn attenuation most probably have anomalously hot and possibly thin lithospheric mantle (i.e. mantle lid). A surprising result is the efficient propagation of Sn across a segment of the Red Sea, an indication that active seafloor spreading is not continuous along the axis of the Red Sea. We also investigated the attenuation of Pn phase (QPn) for 1–2 Hz along the Red Sea, the Dead Sea fault system, within the Arabian Shield and in the Arabian Platform. Consistent with the Sn attenuation, we observed low QPn values of 22 and 15 along the western coast of the Arabian Plate and along the Dead Sea fault system, respectively, for a frequency of 1.5 Hz. Higher QPn values of the order of 400 were observed within the Arabian Shield and Platform for the same frequency. Our results based on Sn and Pn observations along the western and northern portions of the Arabian Plate imply the presence of a major anomalously hot and thinned lithosphere in these regions that may be caused by the extensive upper mantle anomaly that appears to span most of East Africa and western Arabia.

Pre-basaltic sediments (Aptian–Paleocene) of the Kangerlussuaq Basin, southern East Greenland

The recent licensing round in the deep-water areas south-east of the Faeroe Islands has emphasised the continued interest of the oil industry in the frontier areas of the North Atlantic volcanic margins. The search for hydrocarbons is at present focused on the Cretaceous– Paleocene succession with the Paleocene deepwater play as the most promising (Lamers &amp; Carmichael 1999). The exploration and evaluation of possible plays are almost solely based on seismic interpretation and limited log and core data from wells in the area west of the Shetlands. The Kangerlussuaq Basin in southern East Greenland (Fig. 1) provides, however, important information on basin evolution prior to and during continental break-up that finally led to active sea-floor spreading in the northern North Atlantic. In addition, palaeogeographic reconstructions locate the southern East Greenland margin only 50–100 km north-west of the present-day Faeroe Islands (Skogseid et al. 2000), suggesting the possibility of sediment supply to the offshore basins before the onset of rifting and sea-floor spreading. In this region the Lower Cretaceous – Palaeogene sedimentary succession reaches almost 1 km in thickness and comprises sediments of the Kangerdlugssuaq Group and the siliciclastic lower part of the otherwise basaltic Blosseville Group (Fig. 2). Note that the Kangerdlugssuaq Group was defined when the fjord Kangerlussuaq was known as ‘Kangerdlugssuaq’. Based on field work by the Geological Survey of Denmark and Greenland (GEUS) during summer 1995 (Larsen et al. 1996), the sedimentology, sequence stratigraphy and basin evolution of the Kangerlussuaq Basin were interpreted and compared with the deep-water offshore areas of the North Atlantic (Larsen et al. 1999a, b).

Tectonic controls on carbonate sequence formation in an active strike–slip setting: Serranilla Basin, Northern Nicaragua Rise, Western Caribbean Sea

The Serranilla Basin is a flat-floored, semi-circular bathymetric depression (100×100 km; 1100–1200 m deep) at the western end of the northern Nicaragua Rise (NNR) in the Caribbean Sea. It is bound to the north by the Cayman Trough, an area of active sea floor spreading, and is part of the Northern Caribbean Plate Boundary Zone (NCPBZ). Single-channel, high-resolution seismic data were calibrated to rock dredges and ODP Site 1000 to define the geologic evolution and attempt to tie sequence formation within the basin to tectonic developments in this part of the Caribbean. Five seismic sequences were identified within the basin. The two lower sequences (A and B) are interpreted as neritic and shallow periplatform deposits which infill three distinct basins that make up the early to late Miocene Serranilla Basin. The three upper sequences (C through E) are interpreted as periplatform and pelagic deposits interspersed with turbidites, and in some areas, megabreccias. Faulting is prevalent in sequences A through C in the central basin, and becomes progressively younger toward the south, disrupting the seafloor in places and perhaps indicating renewed activity along the Pedro Fracture Zone. The timing of sequence boundary formation has been correlated to tectonic activity along the NCPBZ and closure of the Central American Seaway. Possible mechanisms of sequence boundary formation include tectonic tilting within the basin in conjunction with increased turbidite deposition, carbonate platform drowning and subsequent back-stepping associated with circulation changes resulting from tectonic `gateway' closure, and megabreccia deposition associated with bank demise. Although a direct genetic relationship is not proven, regional tectonic changes are considered more important than eustatic sea-level changes in controlling depositional sequence formation in the Serranilla Basin.

Structure and dynamics of the Eurasian-African/Arabian plate boundary system: Objectives, tasks and resources of the WEGENER group

The Mediterranean-Alpine region marks the broad transition zone between the African/Arabian and Eurasian plates. In a generalized scheme, the recent major tectonic processes there can be understood as a direct consequence of active sea-floor spreading in the Atlantic Ocean, the Red Sea/Gulf of Aden and NW Indian Ocean spreading centres. The higher spreading rate in the South Atlantic compared to that in the North Atlantic leads to a gradual counterclockwise rotation of the African plate resulting in a north-northwestward directed push against Eurasia, which in turn leads to a lithospheric shortening of about 5 mm/a increasing to 40 mm/a in active subduction zones. With northwest-southeastward oriented spreading in the North Atlantic the zone of Eurasian/African plate contact is, therefore, to a large extent under compression thus providing the framework for mountain building processes accompanied by active rifting in preconditioned zones of lithospheric weakness.

Tectonics and magma genesis in the northern North Fiji Basin

The North Fiji Basin is a complex back-arc basin in which active seafloor spreading is occurring along two north-south ridge systems. Lithospheric extension is also taking place along segments of the east-west trending Fiji Fracture Zone and South Pandora Ridge. The Fiji Fracture Zone is clearly a transform fault but the South Pandora Ridge is more difficult to interpret: some characteristics are consistent with a slow-spreading ridge whereas others suggest a transform fault. Basalts recovered on the South Pandora Ridge are enriched in high field strength and large ion lithophile elements and many of them resemble ocean island tholeiites or transitional alkali basalts. The South Pandora Ridge is an enigmatic tectonic feature and the geochemistry, morphology and seismicity are best explained in terms of a model involving slow-spreading ridge segments within a broad transform domain. At its southern end, the central ridge of the North Fiji Basin has a bathymetric profile normally associated with fast-spreading, steady-state, mid-ocean ridges, and the basalts recovered on this part of the ridge are moderately evolved normal mid-ocean ridge basalts (MORB). In contrast, the northern end of the ridge has a complex topography dominated by a series of deep linear troughs and grabens, and basalts recovered from the floors of these troughs vary widely in chemistry from normal MORBs to transitional basalts that are comparatively enriched in large ion lithophile and high field strength elements. The central ridge appears to be propagating northwards into old North Fiji Basin crust and the northern extension of the ridge is an incipient spreading locus in the very earliest stages of development. In areas of the basin where fast-spreading, large-scale mantle upwelling leads to extensive melting of asthenosphere-derived, depleted mantle, MORB-like compositions dominate the erupted rocks. In contrast, areas of slow or incipient spreading and other tectonic settings where a transient thermal disturvance occurs are characterized by basaltic magmatism that shows relative enrichment in large ion lithophile and high field strength minor and trace elements. Mixing of MORB and enriched end member components, either at source or as magmas, gives rise to a spectrum of compositions that can be related to a range of tectonic environments in the back-arc setting.

Geothermal measurements in the northern Red Sea: Implications for lithospheric thermal structure and mode of extension during continental rifting

The northern Red Sea is a continental rift in the process of transition from continental to oceanic rifting. We present 191 new heat flow measurements from the northern Red Sea forming three traverses across the water covered portion of the rift. The heat flow across the rift systematically increases from values of about 125 mW/m2 seaward of the coasts to average values greater than 250 mW/m2 in the axial depression. The heat flow measurements are evaluated for environmental disturbances. These are found to be generally small. The largest estimated disturbance results from the relief of the seafloor and of the top of a subbottom evaporite layer. The relief on these surfaces can account for the 20% point to point scatter typically observed in the heat flow measurements. Limits are placed on systematic disturbances to the heat flow pattern across the rift. The estimated largest systematic disturbance results from sediment blanketing which may cause a reduction in the heat flow on the order of 10%. The heat flow variation across the rift is then utilized to examine the lithospheric thermal structure and the geometry and mechanism of extension. We employ a two‐dimensional time‐dependent numerical technique to follow the advection and diffusion of heat for a simple shear model and various pure shear models of lithospheric extension. The model of simple shear lithospheric extension along a planar shallow dip detachment produces significantly lower than observed heat flow, results in relatively small amounts of thermal thinning of the lithosphere compared to pure shear extension, and does not result in conditions likely to generate melt. The pure shear models with widening or constant width zones of extension also do not match the observed heat flow nor generate partial melt. The modeling study indicates that the actively extending region must become narrower through time in order to match the heat flow high in the center of the rift, generate some degree of partial melt and produce crustal subsidence within the observed width of the rift. A narrowing of the zone of active extension is also consistent with the pattern of tectonic activity inferred from sedimentary structures observed on seismic reflection profiles which indicate an abatement of activity in the marginal areas and intense present‐day activity in the axial depression. In all of the models, an additional component of lithospheric heating other than that produced by extension appears necessary to match heat flow values in the marginal and near coastal areas, as well as explain the observed magnitude of rift flank uplift. Several scenarios in which the zone of extension eventually becomes narrow are consistent with the heat flow data alone, including those resulting in seafloor spreading for the past several million years. However, additional information provided by gravity, magnetic, and seismic reflection and refraction data appear to be most consistent with a history in which a period of relatively uniform extension across the rift is followed by a concentration of extension toward the center of the rift. Such a model retains a small thickness of continental crust in the center of the rift and does not necessitate active seafloor spreading in the northern Red Sea. The three heat flow traverses indicate that maximum lithospheric thinning is occurring within the axial depression in the northern Red Sea which is very close to initiating seafloor spreading. There is evidence that upper crustal extension is locally concentrated in specific areas along the strike of the axial depression forming “deeps” associated with large recent intrusions. These deeps may constitute a precursory stage to seafloor spreading and appear to be nucleating at discrete and regularly spaced sites along the axis of the rift. The deeps are located midway between regularly spaced cross‐trending fault zones or accommodation zones which, in the marginal areas, separate sets of fault blocks along strike. Crustal extension appears to be taken up more diffusely in the accommodation zones than in the intervening fault block domains which are characterized by fewer, larger faults. As a result, initial crustal rupturing and emplacement of large intrusive bodies occurs halfway between the accommodation zones where more focused crustal extension forms the deeps. Comparison with other rifts suggests that the pattern of fault block domains separated by cross‐trending fault zones is a common feature, that it originates early in the development of a rift, and that it may continue to influence the development of the rift up to the establishment of a continuous seafloor spreading axis.