Actinide Research Articles

Spectroscopic and Electrochemical Investigation of Uranium and Neptunium in Chloride Room-Temperature Ionic Liquids.

To expand the breadth of knowledge of actinide chemistry in molten chloride salts, chloride room-temperature ionic liquids (RTILs) were used to probe the influence of RTIL cation on second-sphere coordination for anionic complexes of uranium and neptunium. Six chloride RTILs were studied to represent a range of cation polarizing strength, size, and charge density to correlate changes in the complex geometry and redox behaviors. Optical spectroscopy indicated that actinides were dissolved at equilibrium as octahedral AnCl62- (An = U, Np) as is observed in comparable high-temperature molten chloride salts. These anionic metal complexes were sensitive to the RTIL cation polarizing strength and hydrogen bond donating strength and displayed varying levels of fine structure and hypersensitive transition splitting depending on the degree of perturbation to the complex's coordination symmetry. Furthermore, voltammetry experiments on the redox-active complexes indicated a stabilizing effect on lower valence actinide oxidation states by more polarizing RTIL cations whereby the measured E1/2 potentials for both U(IV/III) and Np(IV/III) couples shifted positively by about 600 mV across the different systems. These results indicate that more polarizing RTIL cations inductively remove electron density from the actinide metal center over An-Cl-Cation bond networks to stabilize electron-deficient oxidation states. Electron-transfer kinetics were generally much slower than in molten chloride systems, partially due to lower temperatures and higher viscosities in the working systems and showed diffusion coefficients of 1.8 × 10-8 to 6.4 × 10-8 cm2 s-1 for UIV and 4.4 × 10-8 to 8.3 × 10-8 cm2 s-1 for NpIV. We also detect a one-electron oxidation of NpIV that we have attributed to the formation of NpV as NpCl6-. Overall, we observe a coordination environment for the anionic actinide complexes that is susceptible to even small changes in RTIL cation properties.

The Potential Interactions of Novec 1230 and Its Thermal Degradation Products with Actinide Metals and Oxides

The environmentally friendly and mainly chemically inert fire suppressant, Novec 1230, is being increasingly used worldwide. However, no published study has considered using Novec 1230 with fires involving radioactive material including actinides; therefore, this research note focuses on the possible interactions between Novec 1230 and its thermal degradation products (TDPs) with some actinide compounds (e.g., actinide metal and oxides) commonly present in a radiological facility in the event of a fire. Previous studies of halogenated fire suppressants used in actinide metal fires indicate a possibility for Novec 1230 or its TDPs to chemically interact with actinide compounds at elevated temperatures; however, these reactions are highly unlikely to cause either runaway exothermic reactions or gaseous actinide release.

Methanation of CO2Over Nanostructured Cobalt‐Actinide Bimetallic Oxides

AbstractNanostructured Cobalt‐Actinide (An=Th, U) bimetallic oxides were for the first time prepared by the epoxide addition method and electrospinning technique aiming the synthesis of aerogels and nanofibers, respectively. Tested as catalysts for the methanation of CO2and regardless of the actinide element, the yield and selectivity towards CH4are high (>40 and 95 %, respectively), which was explained by their physicochemical properties such as reducibility and basicity and the existence of a synergic effect between cobalt and actinide species. The aerogels present the best catalytic behavior, namely those with thorium and the catalytic activity increases with the Co/An molar ratio. Both aerogels and nanofibers also present a high resistance to deactivation for at least 75 h in the gaseous stream, which is an advantage for any catalytic application. Moreover, at 300 °C they are 2 to 4 times more active than two reference catalysts (5wt %Rh/Al2O3and NiO/Al2O3) tested in the same conditions, which to our best knowledge is a significant result.

Crystallization of a Neptunyl Oxalate Hydrate from Solutions Containing NpV and the Uranyl Peroxide Nanocluster U60 Ox30.

Uranyl peroxide nanoclusters are an evolving family of materials with potential applications throughout the nuclear fuel cycle. While several studies have investigated their interactions with alkali and alkaline earth metals, no studies have probed their interactions with the actinide elements. This work describes a system containing U60 Ox30 , [((UO2 )(O2 ))60 (C2 O4 )30 ]60- , and neptunium(V) as a function of neptunium concentration. Ultra-small and small angle X-ray scattering were used to observe these interactions in the aqueous phase, and X-ray diffraction was used to observe solid products. The results show that neptunium induces aggregation of U60 Ox30 when the neptunium concentration is≤10 mM, whereas (NpO2 )2 C2 O4 ⋅ 6H2 O(cr) and studtite ultimately form at 15-25 mM neptunium. The latter result suggests that neptunium coordinates with the bridging oxalate ligands in U60 Ox30 , leaving metastable uranyl peroxide species in solution. This is an important finding given the potential application of uranyl peroxide nanoclusters in the recycling of used nuclear fuel.

Incorporation and migration of xenon in uranium-plutonium mixed nitride; A density functional theory study

Actinide nitride materials are promising candidates for advanced nuclear fuels. In this work, we investigate the bulk properties of the mixed nitrides U0.75Pu0.25N and U0.5Pu0.5N, and study the incorporation and migration behaviour of the fission gas Xe. The disordered U0.75Pu0.25N and U0.5Pu0.5N structures are constructed using the special quasi-random structure method. Their lattice parameters are closer to the experimentally determined values than the corresponding ordered structures. The density of states show that Pu f states are located at lower energy than U f, consistent with the trend of increasing f orbital stability across the actinide series. The actinide vacancy formation energy (Ef) in disordered and ordered U0.5Pu0.5N is highly dependent on the chemical environment around the vacancy: it increases as the number of U atoms in the first nearest-neighbour shell (NU(1NN)) increases, but decreases as the number of U atoms in the second nearest-neighbour shell (NU(2NN)) increases. The Xe incorporation energy (Ei) is found to be independent of vacancy species, depending only on the chemical environment of the vacancy. As does Ef, Ei increases with increasing NU(1NN), while decreases with increasing NU(2NN), because the smaller the NU(1NN) and the larger the NU(2NN), the larger the vacancy steric space. The Ei of Xe and Kr are calculated to be within the ranges 4.47–6.01 eV and 3.30–4.64 eV, respectively. The Xe migration energy barrier in ordered U0.5Pu0.5N allows us to set the energy range for Xe diffusion in disordered U0.5Pu0.5N as 0.50–1.75 eV. A lower range of 0.30–1.25 eV is found for Kr diffusion.

"Z"-Type Tilted Quasi-One-Dimensional Assembly of Actinide-Embedded Coinage Metal Near-Plane Superatoms and Their Optical Properties.

In this work, a novel discovery that the coinage-metal near-plane superatoms (CM-NPSs) formed by embedding actinide elements into the coinage metal rings can realize the "Z"-type tilted quasi-one-dimensional (1D) direct assembly is reported. This success can be attributed to the strong bonding between the overlapping parts of adjacent superatomic motifs. First-principles calculations reveal that the motifs maintain their geometric and electronic structures robustly during the assembly process. With the accumulation of motifs, the intensity of the absorption peak increases continuously in the ultraviolet-visible (UV-Vis) absorption spectra range of 300-450nm, resulting in the hyperchromic effect, which is closely related to the degree of the participation of Th atoms. Furthermore, the absorption spectra show a continuously tunable feature in the 450-900nm range, as the interlayer stacking pattern leads to a pronounced redshift. More importantly, the valence 5f-shells of Th atoms have an increased contribution to the final orbitals of electronic transition, which demonstrates the advantages of the active high angular momentum electrons of actinide elements in spectral properties. These findings provide a valuable reference for the direct artificial assembly of near-plane superatoms and optical properties of superatomic assemblies embedded with rare elements.

Ligand Control of Oxidation and Crystallographic Disorder in the Isolation of Hexavalent Uranium Mono-Oxo Complexes

The development of high-valent transuranic chemistry requires robust methodologies to access and fully characterize reactive species. We have recently demonstrated that the reducing nature of imidophosphorane ligands supports the two-electron oxidation of U4+ to U6+ and established the use of this ligand to evaluate the inverse-trans-influence (ITI) in actinide metal-ligand multiple bond (MLMB) complexes. To extend this methodology and analysis to transuranic complexes, new small-scale synthetic strategies and lower-symmetry ligand derivatives are necessary to improve crystallinity and reduce crystallographic disorder. To this end, the synthesis of two new imidophosphorane ligands, [N═PtBu(pip)2]- (NPC1) and [N═PtBu(pyrr)2]- (NPC2) (pip = piperidinyl; pyrr = pyrrolidinyl), is presented, which break pseudo-C3 axes in the tetravalent complexes, U[NPC1]4 and U[NPC2]4. The reaction of these complexes with two-electron oxygen-atom-transfer reagents (N2O, trimethylamine N-oxide (TMAO) and 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene (dbabhNO)) yields the U6+ mono-oxo complexes U(O)[NPC1]4 and U(O)[NPC2]4. This methodology is optimized for direct translation to transuranic elements. Of the two ligands, the NPC2 framework is most suitable for facilitating detailed bonding analysis and assessment of the ITI. Theoretical evaluation of the U-(NPC) bonding confirms a substantial difference between axially and equatorially bonded N atoms, revealing markedly more covalent U-Nax interactions. The U 6d + 5f combined contribution for U-Nax is nearly double that of U-Neq, accounting for ITI shortening and increased bond order of the axial bond. Two distinct N-atom hybridizations in the pyrrolidine/piperidine rings are noted across the complexes, with approximate sp2 and sp3 configurations describing the slightly shorter P-N"planar" and slightly longer P-N"pyramidal" bonds, respectively. In all complexes, the NPC2 ligands feature more planar N atoms than NPC1, in accordance with a higher electron-donating capacity of the former.

Selective Crystallization of a Highly Radiation-Resistant Isonicotinic Acid-Based Metal–Organic Framework as a Primary Actinide Waste Form

Isonicotinic acid (INA), as a prototypical N,O-donor bifunctional ligand, has demonstrated its ability to differentiate Th4+ from representative ions for products in spent nuclear fuels (Cs+, Ba2+, Mn2+, Fe2+, Fe3+, Co2+, Ni2+, Cu2+, Pd2+, ReO4–, La3+, Ce3+, Ce4+, UO22+), yielding an actinide metal–organic framework, Th-INA-1, by selective crystallization. This unprecedented motif with the highest ligand-binding number (i.e., 16) shows promise as a primary waste form due to its structural integrity, especially exposed to β- or γ-irradiation to achieve doses of 6 MGy.

Periodic trends in trivalent actinide halides, phosphates, and arsenates.

Due to the limited abundance of the actinide elements, computational methods, for now, remain an exclusive avenue to investigate the periodic trends across the actinide series. As every actinide element can exhibit a +3-oxidation state, we have explored model systems of gas-phase actinide trihalides, phosphates, and arsenates across the series to capture the periodic trends. By doing so, we were able to capture the periodic trends down the halogen series as well, and for the first time we are reporting a study on actinide astatides. Using scalar and spin-orbit relativistic Density Functional Theory (DFT) calculations, we have explored the variations in bond lengths, bond angles, and the charges on actinides (An). Despite the use of different sets of ligands, the trends remain similar. The properties of trivalent Pa, U, Np, and Pu are nearly identical; similar ionic radii could be the reason. The actinide elements show a tendency to exhibit a pre-Pu and a post-Cm behaviour, with Am acting as a switch. This could be due to the change in the behaviour from d-f-type to f-filling/d-type at around Pu-Cm in the actinides as already proposed in the previous literature. Bond lengths in the AnX3 increase down the halide series, and the atomic charges decrease on the actinide elements.

Synthesis and reactivity of a uranium(iv) complex supported by a monoanionic nitrogen–phosphorus ligand

A monoanionic N–P ligand L3 with a pendant dimethylamino group was designed. Species with multiple U–C bonds—a rare example of a metallafluorene containing an actinide element—and clusters with multiple U–M bonds were isolated.

Influence of alkali metal cations on the formation of the heterobimetallic actinide tert-butoxides [AnM3(OtBu)7] and [AnM2(OtBu)6] (AnIV = Th, U; MI = Li, Na, K, Rb, Cs).

Heterobimetallic tert-butoxides of alkali metal cations with tetravalent actinide centers exhibit two distinctive structural motifs, [AnM2(OtBu)6] and [AnM3(OtBu)7] (AnIV = Th, U and MI = Li, Na, K, Rb, Cs), evidently governed by the size of the alkali metal ions. Both [AnM3(OtBu)7] AnM3 (AnIV = U, MI = Li; AnIV = Th, MI = Li, Na) and [AnM2(OtBu)6] AnM2 (AnIV = U, MI = Na-Cs; AnIV = Th, MI = K-Cs) compounds are obtained in nearly quantitative yields by reacting actinide and alkali metal silyl amides with an excess of tert-butyl alcohol. The AnM3 complexes form a cubane-type coordination motif, whereas the AnM2 complexes display a geometry resembling two face-shared bipyramids. The sodium derivatives of thorium and uranium (ThNa3 and UNa2) allow the determination of the structural transition threshold as a function of the ratio of the ionic radii ri(AnIV)/ri(MI). The AnM3 complexes are formed for ratios above 0.92 and the AnM2 type is formed for ratios below 0.87. All compounds are unambiguously characterized in both solution and solid states by NMR and IR spectroscopic studies and single crystal X-ray diffraction analyses, respectively.

Selective heterogeneous capture and release of actinides using carborane-functionalized electrodes.

We report the heterogenization of molecular, electrochemically switchable ortho-substituted carboranes (POCb, POCb-Pyr) for selective metal capture. Films of POCb and POCb-Pyr on glassy carbon and carbon fiber (CF) electrodes demonstrated heterogeneous electrochemical behaviour that was enhanced by the inclusion of single-walled carbon nanotubes (CNTs). Galvanostatically charged CF|CNT|POCb and CF|CNT|POCb-Pyr electrodes selectively captured and released actinides (Th4+, UO22+) from mixed solutions containing alkali (Cs+), lanthanide (Nd3+, Sm3+) and actinide (Th4+, UO22+) metal ions.

Relativistic quantum calculations to understand the contribution of f-type atomic orbitals and chemical bonding of actinides with organic ligands.

The nuclear waste problem is one of the main interests of rare earth and actinide element chemistry. Studies of actinide-containing compounds are at the frontier of the applications of current theoretical methods due to the need to consider relativistic effects and approximations to the Dirac equation in them. Here, we employ four-component relativistic quantum calculations and scalar approximations to understand the contribution of f-type atomic orbitals in the chemical bonding of actinides (Ac) to organic ligands. We studied the relativistic quantum structure of an isostructural family made of Plutonium (Pu), Americium (Am), Californium (Cf), and Berkelium (Bk) atoms with the redox-active model ligand DOPO (2,4,6,8-tetra-tert-butyl-1-oxo-1H-phenoxazin-9-olate). Crystallographic structures were available to validate our calculations for all mentioned elements except for Cf. In short, state-of-the-art relativistic calculations were performed at different levels of theory to investigate the influence of relativistic and electron correlation effects on geometrical structures and bonding energies of Ac-DOPO3 complexes (Ac = Pu, Am, Cf, and Bk): (1) the scalar (sc) and spin-orbit (so) relativistic zeroth order regular approximation (ZORA) within the hybrid density functional theory (DFT) and (2) the four-component Dirac equation with both the Dirac-Hartree-Fock (4c-DHF) and Lévy-Leblond (LL) Hamiltonians. We show that sr- and so-ZORA-DFT could be used as efficient theoretical models to first approximate the geometry and electronic properties of actinides which are difficult to synthesize or characterize, but knowing that the higher levels of theory, like the 4c-DHF, give closer results to experiments. We also performed spin-free 4c calculations of geometric parameters for the Americium and Berkelium compounds. To the best of our knowledge, this is the first time that these kinds of large actinide compounds (the largest contains 67 atoms and 421 electrons) have been studied with highly accurate four-component methods (all-electron calculations with 6131 basis functions for the largest compound). We show that relativistic effects play a key role in the contribution of f-type atomic orbitals to the frontier orbitals of Ac-DOPO3 complexes. The analysis of the results obtained applying different theoretical schemes to calculate bonding energies is also given.

The additional nitrogen atom breaks the uranyl structure: a combined photoelectron spectroscopy and theoretical study of NUO2.

We report a joint photoelectron spectroscopic and relativistic quantum chemistry study on gaseous NUO2-. The electron affinity (EA) of the neutral NUO2 molecule is reported for the first time with a value of 2.602(28) eV. The U-O and U-N stretching vibrational modes for the ground state and the first excited state are observed for NUO2. The geometric and electronic structures of both the anions and the corresponding neutrals are investigated by relativistic quantum chemistry calculations to interpret the photoelectron spectra and to provide insights into the nature of the chemical bonding. Both the ground state of the anion and neutral are calculated to be planar structures with C2v symmetry. Unlike the "T"-shape structure of UO3 which has a quasi-linear O-U-O angle, both the ground-state geometries of the anion and neutral have O-U-O bond angles of around 90°. The significant contraction of the O-U-O bond angle indicates the strong interaction between the U and N atoms compared with the "additional" oxygen in UO3. The chemical bonding calculation indicates that multiple bonding of U(VI) can occur in NUO2- and NUO2, and the UVI-N bond is significantly more covalent than the U-O bond. The current experimental and theoretical results reveal the difference between the U-N and U-O bond in the unified molecular system, and expand our understanding of the bonding capacities of actinide elements with the nitrogen atom.

Th@C2(8)-C84 and Th@Cs(15)-C84: impact of actinide metal ions on the electronic structures of actinide endohedral metallofullerenes

Two novel endohedral metallofullerenes, Th@C2(8)-C84 and Th@Cs(15)-C84, have been successfully synthesized and fully characterized. Spectroscopic studies suggest that endohedral actinide metal atoms have an important impact on the electronic structures of actinide metallofullerenes.

Excellent 5f-electron magnet of actinide atom decorated gh-C3N4 monolayer.

Atomic functionality of two-dimensional (2D) materials, typically with a controllable doping route for offering regular atomic arrangement as well as excellent magnetism, is crucial for both fundamental studies and spintronic applications. Here, the adsorptions of the 5f-electron actinide series (An = Ac-Am) on porous graphene-like carbon-nitride (gh-C3N4) layers are explored to determine their structural stabilities, electronic nature and magnetic properties using the combination of density functional theory (DFT) calculations, ab initio molecular dynamics (AIMD), Monte Carlo (MC) simulations and chemical bonding analyses. Our investigations reveal that each An atom can be individually adsorbed at the vacancy site of gh-C3N4 sheet with high energetic, thermal and dynamical stabilities, which are rooted in the major interactions of ionic An-N bonding as well as the minor interactions of covalent bonding of An-5f6d states with N-2s2p states. The delocalization of a very few 5f electrons is dependent on whether they occupy the suborbitals that are matching and conducive to hybridize with the ligand orbitals forming the 5f-2s2p covalent bonds. We propose that the Ruderman-Kittel-Kasuya-Yosida (RKKY) mechanism plays a determining role for the inter-atomic 5f-5f magnetic exchange via the 6d electrons as the conduction electrons. Large magnetic moment and magnetic anisotropy energy (MAE) from the localized 5f electrons, together with the metallic characteristics owing to the delocalized 6d electrons, render these An-based 2D materials excellent metallic magnets, especially for the U@gh-C3N4 system with the modest magnetic moment of 0.6 μB, large MAE of 53 meV and high Curie temperature (TC) of 538 K.

Crystallographic and/or magnetic properties of neutral and cationic uranium(IV) sandwiched phthalocyanine complexes

Neutral and cationic U(IV) sandwiched phthalocyanine (Pc) complexes were prepared. The neutral species, UPc2, was obtained by the reaction of UCl4 and phthalonitrile, and the [UPc2][BF4] crystals were grown by electrolysis. The structures of the complexes were determined crystallographically. A U(IV) ion has two 5f electrons, which carry a magnetic moment localized at the U sites, making the complex magnetically active. The magnetic susceptibility measurement of UPc2 revealed that the system was paramagnetic with local magnetic moments down to 2 K, but these magnetic moments were suppressed, possibly by a ligand field effect. The paramagnetism was also confirmed by the magnetization curve without hysteresis. The cationic complex, [UPc2][BF4] crystalized in a tetragonal structure with the space group P4nc, in which the UPc2 molecules stacked along the tetragonal c-axis. The structure was similar to that of [LnPc2][BF4], but with distinct disorder in the stacking plane. The stabilities of the crystal and molecular structures and the electronic configurations of UPc2 and [UPc2][BF4] were evaluated via the ab initio calculations that included the multiconfigurational nature of the actinide element.

Testing fast reactor fuels in a thermal reactor: Comparison of transmutation metallic fuel alloys behavior by scanning electron microscopy

To optimize nuclear waste repository performance, the destruction of minor actinide elements, particularly Np and Am, in a neutron fast spectrum reactor is possible by incorporating these elements into nuclear fuel. Evaluating the performance of minor actinide containing fuel is of paramount importance to enabling this technology. However, such a task is challenging without an available domestic fast spectrum test reactor. A comparison of fuel performance tested in an available domestic thermal reactor at the Idaho National Laboratory, the Advanced Test Reactor, and in a fast spectrum reactor in France (Phénix) is presented in this study. This study evaluates the capability of using a cadmium shrouded test position to mimic the power profile along the fuel radius present in fast spectrum reactors so that thermally driven phenomenon (e.g., constituent redistribution) can be evaluated in a thermal reactor and determined to be prototypical of a fast reactor. Thus, optical microscopy and scanning electron microscopy has been performed on irradiated 35U-29Pu-4Am-2Np-30Zr fuel samples (where the number preceding the element is the weight percent concentration) from the two mentioned reactors that present similar irradiation temperatures and power conditions. The results indicate that fuel performance phenomena are reproducible in the two irradiation conditions. The redistribution of Zr occurred in the same manner for the two samples. Similar partitioning of U-Pu-Zr phases was observed, and the behavior of Am was similar in the analyzed specimens. Finally, the overall microstructure evolution seems not to be affected by minor actinides addition compared to expected behavior of conventional U-19Pu-10Zr ternary metal fuels for both specimens. Slight differences in fuel cladding chemical interaction were, however, observed. This difference is likely driven by difference in cladding composition rather than irradiation conditions.

Extraction Behavior of Some Elements from Leaching Solution of Simulated Nuclear Fuel

The crush-leach process was investigated as a method to treat GEN IV simulated ceramic-coated reactor fuel. Simulated ceramic-coated fuel was prepared using fine carbon as a coating and surrogate elements for fuel, the method retained the bulk of the carbon components in elemental form, which is favorable for achieving waste reduction goals. Simulated ceramic-coated fuel was crushed and nitric acid was added to the fines as slurry that led to rapid and effective leaching of the heavy metal. The leaching process of simulated crushed ceramic-coated fuel and extraction behavior of the separated leaching solution was tested at the laboratory scale. Results showed that carbon used in the preparation of stimulated fuel was difficult to be separated by filtered, indicating the need to carefully control particle size and/or use alternative solid-liquid separation methods. Foams or emulsions was not observed during the solvent extraction step, which indicated that measurement of the distribution ratios for actinides elements were slightly larger than predicted by previous models. This increase may be due to small concentrations of organics; however the experimental results are not conclusive. Although the results do not strongly indicate effects by a contaminating organic agent, the organic species may exist in small concentrations. Such an organic species could affect the extraction behavior of the solvent if it accumulates over time.

Application of High-Energy-Resolution X-ray Absorption Spectroscopy at the U L3-Edge to Assess the U(V) Electronic Structure in FeUO4.

FeUO4 was studied to clarify the electronic structure of U(V) in a metal monouranate compound. We obtained the peak splitting of spectra utilizing high-energy-resolution fluorescence detection-X-ray absorption near-edge structure (HERFD-XANES) spectroscopy at the U L3-edge, which is a novel technique in uranium(V) monouranate compounds. Theoretical calculations revealed that the peak splitting was caused by splitting of the 6d orbital of U(V) in FeUO4, which would be used to detect minor U(V) species. Such distinctive electronic states are of major interest to researchers and engineers working in various fields, from fundamental physics to the nuclear industry and environmental sciences for actinide elements.