Acoustic Wave Sensor Research Articles

High-Temperature SAW Resonator Sensors: Electrode Design Specifics.

Surface acoustic wave (SAW) sensors are steadily paving the way to wider application areas. Their main benefit consisting in the possibility of wireless interrogation with the radio frequency interrogation signal being the only energy source for the reradiated signal. This feature is getting more and more attractive with the growing demand in monitoring multiple industrial objects difficult to access by wired sensors in harsh environments. Among such wider applications, the possibility of making measurements of temperature, deformation, vibrations, and some other parameters at temperatures in the range of 300 °C-1000 °C look quite promising. This paper concentrates on specific features of the SAW resonator-based sensors operation at this temperature range. High-temperature influences the material choice and thus the properties of SAW resonators design peculiarities intended for use at high temperature. It is suggested that preferable designs should use synchronous resonators with relatively thick electrodes (10% of wavelength) based on Ir or Pt alloys while benefiting from the possibilities of specific designs that could reduce the negative impact of thick electrodes on the manufacturing in quantity. This solution benefits from lower resonance frequency scatter because of the automatic compensation of SAW velocity decrease due to electrode metallization ratio increase. This compensation originates from the resonance frequency increase that is related to the decrease of the Bragg bandwidth defined by the reflection. It is shown in modeling examples that the value of metallization ratio at which this compensation occurs is close to 65%-70%.

Micro-nano-bio acoustic system for the detection of foodborne pathogens in real samples

The fast and efficient detection of foodborne pathogens is a societal priority, given the large number of food-poisoning outbreaks, and a scientific and technological challenge, given the need to detect as little as 1 viable cell in 25 gr of food. Here, we present the first approach that achieves the above goal, thanks to the use of a micro/nano-technology and the detection capability of acoustic wave sensors. Starting from 1 Salmonella cell in 25 ml of milk, we employ immuno-magnetic beads to capture cells after only 3 h of pre-enrichment and subsequently demonstrate efficient DNA amplification using the Loop Mediated Isothermal Amplification method (LAMP) and acoustic detection in an integrated platform, within an additional ½ h. The demonstrated 4 h sample-to-analysis time comes as a huge improvement to the current need of few days to obtain the same result. In addition, the work presents the first reported Lab-on-Chip platform that comprises an acoustic device as the sensing element, exhibiting impressive analytical features, namely, an acoustic limit of detection of 2 cells/μl or 3 aM of the DNA target and ability to detect in a label-free manner dsDNA amplicons in impure samples. The use of food samples together with the incorporation of the necessary pre-enrichment step and ability for multiple analysis with an internal control, make the proposed methodology highly relevant to real-world applications. Moreover, the work suggests that acoustic wave devices can be used as an attractive alternative to electrochemical sensors in integrated platforms for applications in food safety and the point-of-care diagnostics.

Graphene Surface Acoustic Wave Sensor for Simultaneous Detection of Charge and Mass.

We have combined a graphene field-effect transistor (GFET) and a surface acoustic wave (SAW) sensor on a LiTaO3 substrate to create a graphene surface acoustic wave (GSAW) sensor. When a SAW propagates in graphene, an acoustoelectric current (IA) flows between two attached electrodes. This current has unique electrical characteristics, having both positive and negative peak values with respect to the electrolyte-gate voltage (VEg) in solution. We found that IA is controlled by VEg and the amplitude of the SAW. It was also confirmed that the GSAW sensor detects changes of electrical charge in solution like conventional GFET sensors. Furthermore, the detection of amino-group-modified microbeads was performed by employing a GSAW sensor in a phthalate buffer solution at pH 4.1. The hole current peak shifted to the lower left in the IA-VEg characteristics. The left shift was caused by charge detection by the GFET and can be explained by an increase of amino groups that have positive charges at pH 4.1. In contrast, the downward shift is thought to be due to a reduction in the amplitude of the propagating SAW because of an increase in the mass loading of microbeads. This mass loading was detected by the SAW sensor. Thus, we have demonstrated that the GSAW sensor is a transducer capable of the simultaneous detection of charge and mass, which indicates that it is an attractive platform for highly sensitive and multifunctional solution sensing.

Real Time Cascade Impactor Based On Surface Acoustic Wave Delay Lines for PM10 and PM2.5 Mass Concentration Measurement.

In this research, Surface Acoustic Wave (SAW) sensors are combined with a cascade impactor to perform real time PM10 and PM2.5 mass concentration measurements. The SAW sensors consist of 125 MHz delay lines based on Love waves propagating on an AT-cut quartz substrate. The Love waves are guided on the substrate’s surface using a silica layer. SAW sensors themselves are not capable to discriminate particles by their size, therefore, particle separation based on aerodynamic diameter is achieved using a 3 Lpm dedicated cascade impactor. The latter was designed to integrate the SAW sensors which are monitored using a phase shift measurement. The collected particles impact on the acoustic sensor’s surface inducing a gravimetric effect that modifies the acoustic wave propagation conditions. The resulted phase shift allows the measurement of the mass deposited on the sensitive zone. The novel cascade impactor with SAW sensors as particle collecting stages is exposed to different aerosols in the 0–150 μg/m3 concentration range and proved to be able to detect and differentiate particles based on their size in real time. The system’s response was compared to a commercial optical counter based on light scattering technology and was found to be in good agreement with it.

Development of Electrospinning System for Synthesis of Polyvinylpyrrolidone Thin Films for Sensor Applications

Electrospinning is a systematic process of elaborating nanofibers by forcing a polymer fluid through a spinneret by the application of electric field. Polyvinylpyrrolidone (PVP) is a hydrophilic polymer that has good film formation properties.PVP thin films are widely used as a sensitive layer in Surface Acoustic Wave (SAW) sensors in order to detect the volatile organic compounds.The present study was aimed at development of cost effective electrospinning system for production of quality thin films and parametric optimization. Experimental investigation was performed by electrospinning of PVP considering 7.5wt %, 10wt %,12.5wt %,15wt %,dissolved in Di-MethylFormamide (DMF). The process parameters considered were voltage of 20kV, flow rate 0.5ml/hr, needle dimension 21 gauge and tip-to-collector distance 100 mm. It was found that concentration of polymer is a critical factor in controlling the beads formation and fiber diameters although applied voltage and tip-to-collector distance also influenced the fiber diameter.With increase in concentration of the polymer solution the formation of beads formation reduced significantly with increase in fiber diameter. The fiber diameter varied between 25.50 nm to 113.84 nm. Minimum fiber diameter obtained was 25.5 nm whereas the corresponding bead diameter was 647.39 nm for 10 wt % polymer concentration. Maximum fibre diameter obtained was for 15 wt % polymer concentration with 135.85 nm and the corresponding bead diameter of 1208.35 nm. Morphological studies of electrospun thin films by Scanning Electron Microscope (SEM) revealed the formation of fibres in nano dimension, PVP with 10 wt % dissolved in DMF and suitable process parameters can result in nanofibres with lesser bead formation.

Split resonances for simultaneous detection and control measurements in a single bulk acoustic wave (BAW) sensor.

A self-referenced resonator consisting of two distinct areas of the top electrode made from Mo and a thin (5-30 nm) functional Au layer is shown. The fundamental frequencies for both the shear (∼1 GHz) and longitudinal (∼2 GHz) modes are split in two, such that mass attachment on the functional layer region causes frequency shifts in only one of the resonances, allowing a new approach of using the difference between the two frequencies to be used to measure mass attachment; this reduces the importance of device-to-device variability in absolute resonant frequency as a result of device fabrication.

Development of a flow injection analytical system for short chain amide determination based on a tubular bioreactor and an ammonium sensor.

Pseudomonas aeruginosa (P. aeruginosa) possesses intracellular amidase activity, which catalyses the hydrolysis of short aliphatic amides producing NH4+, and has already been used along with an ammonium ion selective electrode for amide quantification. However, the incorporation of a biological membrane turned to be a challenging process and either the final arrangement was prone to amidase losses or the recovery of the sensor coating after the interaction took too long. In this article a flow injection system with an ammonium acoustic wave sensor is proposed, and after testing several different arrangements for the biological element, the ultimate choice consisted of the immobilization of a P. aeruginosa cell-free extract in the inner wall of a tubular glass reactor, which resulted in a reliable analytical system. Response times less than one minute and complete recovery in less than two minutes assured conveniently fast analysis. The analytical system, as long as the column was properly stored in HEPES buffer containing 2 mM β-mercaptoethanol and 1 mM benzamidine and refrigerated when not in use, could be used at least for 20 working days, along a period of one month, maintaining the initial sensitivity.

Design and Simulation of MEMS Based Surface Acoustic Wave Sensor using COMSOL Multiphysics

Design and Simulation of MEMS Based Surface Acoustic Wave Sensor using COMSOL Multiphysics

Measurement of speed of sound, density compressibility and viscosity in liquid methyl laurate and ethyl laurate up to 200 MPa by using acoustic wave sensors

This paper presents measurements of speed of sound, density, viscosity and compressibility in liquid ethyl laurate and methyl laurate along isotherms ranging from (293.15 to 353.15) K at pressures that cover the pressure range of common rail direct fuel injection systems (up to 200 MPa). Measurements have been carried out by two different acoustic wave sensors assembled within a single device. The former works in the longitudinal mode to determine speed of sound whereas the latter acts in the thickness shear mode in order to measure the density viscosity product. The measurement principle of sound speed is based on pulse-echo technique whereas density is evaluated by integration of speed of sound measurement using Newton Laplace equation. Viscosity is determined from measurement of the resonance behavior of the thickness shear wave sensor. Finally both isothermal and isentropic compressibilities are obtained from density and speed of sound data.

Rapid Monitoring of Pharmacological Volatiles of Night-Flowering Evening-Primrose According to Flower Opening or Closing by Fast Gas Chromatography/Surface Acoustic Wave Sensor (Electronic zNose).

Aroma is important in night-flowering species, as visually they can not be observed well. Thus, the analysis of the volatiles of evening-primrose is of great interest in biological fields and therapy. Furthermore, the analysis of volatiles demands rapid and simple procedure, because volatiles decompose. The aim of this study is to show the rapid monitoring of the volatiles of evening-primrose according to the flowering or closing by fast gas chromatography/surface acoustic wave GC/SAW. Moreover, calibration according to the sensor temperature of the GC/SAW was performed, achieving a high reproducibility and excellent sensitivity. GC/SAW is an effective analytical method that provides on-line measurements without pretreatment of sample. Headspace solid-phase micro-extraction coupled to gas chromatography mass spectrometry (HS-SPME-GC-MS) and dynamic headspace trapping and extraction with GC-MS were employed to confirm the identification of the volatiles of evening-primrose compared to GC/SAW. Linalool was found to be the dominant component, comprising 96.4-25.2% of the total amount, according to the opening or closing. Interestingly, the amount of indole also varied according to the opening or closing (3.0-0.0%) such as linalool. Also, while the sensitivity increased with the reduction in the sensor temperature of the GC/SAW, the reproducibility showed a tendency to decrease. The results showed that flower opening is related to the volatiles emission, which is pharmacological and plant defensive. GC/SAW can be a useful analytical method for the rapid monitoring of volatiles of evening-primrose according to the opening or closing as it provides second unit analysis, as well as simple, and aroma pattern recognition. Copyright © 2017 John Wiley & Sons, Ltd.

Recent Advances in the Development of Chromophore-Based Chemosensors for Nerve Agents and Phosgene.

The extreme toxicity and ready accessibility of nerve agents and phosgene has caused an increase in the demand to develop effective systems for the detection of these substances. Among the traditional platforms utilized for this purpose, chemosensors including surface acoustic wave (SAW) sensors, enzymes, carbon nanotubes, nanoparticles, and chromophore based sensors have attracted increasing attention. In this review, we describe in a comprehensive manner recent progress that has been made on the development of chromophore-based chemosensors for detecting nerve agents (mimic) and phosgene. This review comprises two sections focusing on studies of the development of chemosensors for nerve agents (mimic) and phosgene. In each of the sections, the discussion follows a format which concentrates on different reaction sites/mechanisms involved in the sensing processes. Finally, chemosensors uncovered in these efforts are compared with those based on other sensing methods and challenges facing the design of more effective chemosensors for the detection of nerve agents (mimic) and phosgene are discussed.

Classification of different erythrocyte cells by using bioimpedance surface acoustic wave and their sedimentation rates

Abstract Classification of the RBCs with their shapes, volumes and volume fractions is an important indicator for the normality of the healthy body. RBCs in the plasma are simulated electrically as a conductor solution with insulated particles moving through the plasma. Consequently, the impedance of the plasma-RBCs is proportional to the number and the volume of the RBCs within the plasma. This paper presents a new proposed method for studying the characteristics of the RBCs by using a surface acoustic wave sensor. Because of the free motion of the RBCs during the test of the erythrocytes sedimentation rate, the concentration of the RBCs varies from one layer to another. Consequently, the output waveform of the surface acoustic wave sensor changes from one time to another related to the behavior of the RBCs. This method shows its ability to classify not only the volume fraction and volumes of the RBCs, but also the different types of the RBCs.

Surface acoustic wave sensors with Graphene/PANI nanocomposites for nitric oxide detection

Surface acoustic wave sensors with grapheme/PANI nanocomposite sensitive films for detecting nitric oxide (NO) were fabricated and experimentally studied. Morphological characterization and functionalization of the sensing material were explored using SEM and FTIR, respectively. The study of sensor response compared film sensitivity, response time, reversibility, and limit of detection for nanocomposite films, pure grapheme and pure PANI to the detection of NO. The response and recovery times were 40s and 20s when detecting 4ppm NO, respectively. The frequency response was discovered to be linear in the NO concentration range 1–50 ppm. The nanocomposite sensors had improved sensitivities compared to the polymer devices, and better response times.

Acoustic Sensors Based on Amino-Functionalized Nanoparticles to Detect Volatile Organic Solvents.

Love-wave gas sensors based on surface functionalized iron oxide nanoparticles has been developed in this research. Amino-terminated iron oxide nanoparticles were deposited, by a spin coating technique, onto the surface of Love-wave sensors, as a very reproducible gas-sensing layer. The gases tested were organic solvents, such as butanol, isopropanol, toluene and xylene, for a wide and low concentration range, obtaining great responses, fast response times of a few minutes (the time at which the device produced a signal change equal to 90%), good reproducibilities, and different responses for each detected solvent. The estimated limits of detection obtained have been very low for each detected compound, about 1 ppm for butanol, 12 ppm for isopropanol, 3 ppm for toluene and 0.5 ppm for xylene. Therefore, it is demonstrated that this type of acoustic wave sensor, with surface amino-functionalized nanoparticles, is a good alternative to those ones functionalized with metal nanoparticles, which result very expensive sensors to achieve worse results.

On-chip nanofluidic integration of acoustic sensors towards high Q in liquid

This paper reports an on-chip acoustic sensor comprising a piston-mode film bulk acoustic resonator and a monolithically integrated nanochannel. The resonator with the channel exhibits a resonance frequency (f) of 2.5 GHz and a quality (Q) factor of 436 in deionized water. The f × Q product is as high as 1.1 × 1012, which is the highest among all the acoustic wave sensors in the liquid phase. The sensor consumes 2 pl liquid volume and thus greatly saves the precious assays in biomedical testing. The Q factor is investigated, and real-time viscosity tests of glucose solution are demonstrated. The highly miniaturized and integrated sensor is capable to be arrayed with readout-circuitry, which opens an avenue for portable applications and lab-on-chip systems.

Highly Selective Polypyrrole MIP-Based Gravimetric and Electrochemical Sensors for Picomolar Detection of Glyphosate.

There is a global debate and concern about the use of glyphosate (Gly) as an herbicide. New toxicological studies will determine its use in the future under new strict conditions or its replacement by alternative synthetic or natural herbicides. In this context, we designed biomimetic polymer sensing layers for the selective molecular recognition of Gly. Towards this end, complementary surface acoustic wave (SAW) and electrochemical sensors were functionalized with polypyrrole (PPy)-imprinted polymer for the selective detection of Gly. Their corresponding limits of detection were on the order of 1 pM, which are among the lowest values ever reported in literature. The relevant dissociation constants between PPy and Gly were estimated at [Kd1 = (0.7 ± 0.3) pM and Kd2 = (1.6 ± 1.4) µM] and [Kd1 = (2.4 ± 0.9) pM and Kd2 = (0.3 ± 0.1) µM] for electrochemical and gravimetric measurements, respectively. Quantum chemical calculations permitted to estimate the interaction energy between Gly and PPy film: ΔE = −145 kJ/mol. Selectivity and competitivity tests were investigated with the most common pesticides. This work conclusively shows that gravimetric and electrochemical results indicate that both MIP-based sensors are perfectly able to detect and distinguish glyphosate without any ambiguity.

Long-Term Stability of Polymer-Coated Surface Transverse Wave Sensors for the Detection of Organic Solvent Vapors.

Arrays with polymer-coated acoustic sensors, such as surface acoustic wave (SAW) and surface transverse wave (STW) sensors, have successfully been applied for a variety of gas sensing applications. However, the stability of the sensors’ polymer coatings over a longer period of use has hardly been investigated. We used an array of eight STW resonator sensors coated with different polymers. This sensor array was used at semi-annual intervals for a three-year period to detect organic solvent vapors of three different chemical classes: a halogenated hydrocarbon (chloroform), an aliphatic hydrocarbon (octane), and an aromatic hydrocarbon (xylene). The sensor signals were evaluated with regard to absolute signal shifts and normalized signal shifts leading to signal patterns characteristic of the respective solvent vapors. No significant time-related changes of sensor signals or signal patterns were observed, i.e., the polymer coatings kept their performance during the course of the study. Therefore, the polymer-coated STW sensors proved to be robust devices which can be used for detecting organic solvent vapors both qualitatively and quantitatively for several years.

A Non-invasive Monitoring of Propofol Concentration in Blood by a Virtual Surface Acoustic Wave Sensor Array.

Propofol (2,6-diisopropylphenol) is widely used in total intravenous anesthesia. An unknown drug concentration in blood always leads to some side effects in patients with propofol injection. However, the drug concentration in the blood is hard to be continuously measured since invasive sampling causes a loss of blood at each measurement. Here, we introduced a virtual surface acoustic wave sensor array (VSAWSA) to non-invasively detect the propofol concentration in blood through exhaled gases. Calibration was conducted by a parallel test using gas chromatography and mass spectrometry (GC-MS) with solid-phase micro-extraction (SPME) for preconcentration. The limit of detection of VSAWSA reached 0.15 nmol/L for propofol. Six cases of clinical trials was conducted to compare the exhaled propofol concentrations to the plasma concentrations controlled by target-controlled infusion (TCI). The calibration by GC-MS ensured the feasibility, reliability, and accuracy of the VSAWSA (R = 0.9904, p <0.001). The clinical monitoring data by VSAWSA showed an excellent consistency with TCI.

Noise Radar Approach for Interrogating SAW Sensors Using Software Defined Radio

Passive, wireless surface acoustic wave (SAW) sensor systems can be approached from a radar perspective, where the SAW device is thought of as a cooperative target. This paper investigates the use of a commercial-off-the-shelf software defined radio to interrogate wireless SAW sensors with a randomly generated interrogation pulse. The USRP B200mini is utilized as the transceiver platform with custom field-programmable gate array (FPGA) modifications to generate the random interrogation waveform and provide synchronization and buffering to the received signal. Each transmit sample bit in the FPGA is fed by an independent linear-feedback shift register, which generates pseudo-random I and Q samples for the interrogation pulse. An RF daughterboard has also been developed and integrated with the B200mini to increase the transmit power, provide filtering of the RF signals, and switch a signal antenna between the transmit and receive channels. Radio control and matched filter correlator post-processing are accomplished using Python. Design and implementation details for the FPGA modifications, RF daughterboard, and post-processing are discussed. The system is demonstrated by wirelessly interrogating SAW temperature sensors at 915 MHz.

Cobalt Phthalocyanine Surface Acoustic Wave Sensor for Chloride Sensing in Water Samples

A 104 MHz Surface Acoustic Wave (SAW) sensor functionalized with a 100 nm thick Cobalt Phthalocyanine (CoPc) layer was investigated for chloride sensing in liquid media. Atomic force microscopy was first investigated to characterize the morphology of three phthalocyanine molecules, Pc, CoPc and FePc, deposited by molecular beam epitaxy on the SAW sensing area. CoPc was chosen for its particular columnar shape, highly suitable for sensing applications.