Acceptable Concentration Research Articles

Shallow groundwater environmental investigation at northeastern Cairo, Egypt: quality and photo-treatment evaluation.

Groundwater represents the primary source of freshwater for more than 35% of world people, and its contamination became a worldwide challenge. Egypt is suffering from water quantity and quality, especially in desert areas. El Obour city and environs Northeast Cairo face waterlogging owing to the elevated-shallow groundwater table. In the present research work, the water quality of the shallow groundwater aquifer was studied. The remediation efficiency of polluted water using photocatalytic treatment technique in the presence of modified nano-titania and solar radiation has also been investigated. Twenty-eight representative samples have been collected from different locations, and their microbial, physical, and chemical characteristics were determined. The average contents of Pb (214.96µg/L), As (1517µg/L), Cd (8.79µg/L), total bacterial count (2.22 × 105CFU/ml), and bacterial indicators (MPN-index/100ml): total coliform (497.4), fecal coliform (358.3), and fecal streptococci (115.9) were higher than WHO permissible limits for drinking water, possibly due to higher industrialization, agricultural, and urbanization rates. The organic pollutants reached critical concentrations (chemical oxygen demand up to 960.8mgO2/L). Most of the studied samples contained acceptable concentrations of the major ions, (e.g., K+, Mg2+, HCO3-), for drinking and irrigation purposes. The statistical analyses (e.g., principal component analysis and cluster analysis) pointed out the control of water-rock interaction and anthropogenic activities in water composition. The hydrochemical data show that most of the water samples (96.4%) are Na2SO4 and NaHCO3 type, indicating its meteoric origin. The contamination with human and animal fecal substances, NO3¯, and NH4+ was identified in all samples, which pointed out the control of anthropogenic activities in water pollution. The photocatalytic technique efficiently eliminated more than 82-95% of organic contents and microbial pollutants, respectively, but it was inefficient in reducing heavy metal levels. According to the current results, shallow groundwater injection into the deep aquifer must be constrained and reusable after treatment. Finally, more studies are imperative to disseminate the applied treatment techniques to elude bacteria and organic pollutants from water at a pilot scale.

Seasonal dynamics of lead content in sod-podzolic soil in dependence of mineral fertilizer application

Influence of prolonged use of increasing doses of mineral fertilizers (NPK by 0-30-60-90-120-150 kg of active matter/ha) on contents and dynamics of acid-soluble and mobile compounds of lead in an arable layer of the sod-podsolic soil was studied during the growing season of 2016. It has been established that prolonged application of fertilizers significantly increases the content of mobile forms of the element in the soil at application of NPK in dozes of 30 and 150 kg of active matter / ha as compared to the control (average values are 0.57, 0.51, and 0.33, respectively). However, even prolonged application of large doses of mineral fertilizers does not lead to a significant increase in lead content in the arable horizons of the soil. Acid-soluble lead compounds range from 2.46 (N0P0K0) to 5.33 mg/kg (N150P150K150); the content of mobile lead compounds from 0.08 to 1.31 mg/kg of soil, respectively, at maximum acceptable concentration of 6.0 mg/kg. The content of acid-soluble and mobile lead compounds in arable horizons of sod-podzolic soil had a reliable dynamics during the growing season on all variants of the experiment. An increase in the content and acid-soluble and mobile compounds is usually observed in the first half of the growing season (end of May - beginning of June), which is probably due to the active mobilization of lead from slow-moving compounds as a result of the activation of microbiological activity under a favorable hydrothermal regime. In the same period, the portion of mobile fractions of lead to acid-soluble fractions increases. Application of increasing doses of fertilizers (30, 60, 90, 120 and 150 kg/ha of active matter) does not always show a reliable increase in the content of the element in the corresponding variant, which is obviously due to the influence of unaccounted factors. A clearer content dynamics is characteristic of mobile lead compounds.

Comparison Access to Odor Problems in Selected European Countries

The effects of odor are not only annoying but can also cause serious health problems, resulting in an impact on the overall qualityof the environment.Most European jurisdictions classify odor as an atmospheric pollutant and regulate it at various levels of government. This papersummarizes the approach of selected European countries to this issue, comparison in terms of acceptable concentrations, comparisonof instruments used in individual countries, requirements for the application of BAT technologies that ultimately lead to thereduction of odor emissions. Further are described, the basic features of odors, units, methods of analysis and dispersion´s modeling,application of odor removal technologies, with emphasis in relation to the Czech Republic.

Effects of Climatic Conditions, Season and Environmental Factors on CO2 Concentrations in Naturally Ventilated Primary Schools in Chile

Between the ages of 6 and 18, children spend between 30 and 42 h a week at school, mostly indoors, where indoor environmental quality is usually deficient and does not favor learning. The difficulty of delivering indoor air quality (IAQ) in learning facilities is related to high occupancy rates and low interaction levels with windows. In non-industrialized countries, as in the cases presented, most classrooms have no mechanical ventilation, due to energy poverty and lack of normative requirements. This fact heavily impacts the indoor air quality and students’ learning outcomes. The aim of the paper is to identify the factors that determine acceptable CO2 concentrations. Therefore, it studies air quality in free-running and naturally ventilated primary schools in Chile, aiming to identify the impact of contextual, occupant, and building design factors, using CO2 concentration as a proxy for IAQ. The monitoring of CO2, temperature, and humidity revealed that indoor air CO2 concentration is above 1400 ppm most of the time, with peaks of 5000 ppm during the day, especially in winter. The statistical analysis indicates that CO2 is dependent on climate, seasonality, and indoor temperature, while it is independent of outside temperature in heated classrooms. The odds of having acceptable concentrations of CO2 are bigger when indoor temperatures are high, and there is a need to ventilate for cooling.

Utilization of hydrochar derived from waste paper sludge through hydrothermal liquefaction for the remediation of phenol contaminated industrial wastewater

Abstract Hydrothermal liquefaction derived hydrochar produced from industrial paper sludge was used as an adsorbent to remove phenol derivatives from an industrial wastewater stream. Removal efficiency for phenol was determined using synthetic solutions (10–150 ppm) using batch adsorption experiments at a constant solution pH (8), temperature (25 ± 2 °C) and rotary speed (150 rpm). The adsorption of phenol onto hydrochar followed a Freundlich isotherm and could be described with pseudo-second-order kinetic models. Analysis of the adsorption mechanisms showed that particle film mass transport was the rate-determining step in the adsorption process. A COD removal efficiency of 31 ± 1% was achieved for the industrial wastewater stream. All phenol components in the wastewater stream could be removed, but not all organic acids and cyclic ketones. The performance of the paper sludge-based hydrochar compared well with that of activated carbon (44% COD removal). The final phenol concentration in the wastewater stream was below the acceptable phenol concentration for industrial effluents (1 mg/L). The results show that paper sludge can be converted to a valuable marketable commodity that could reduce waste management costs for a paper mill, while also reducing the cost of expensive adsorbents.

N-Methylformamide. Documentation of proposed values of occupational exposure limits (OELs)

N-Methylformamide is a colorless liquid with an ammoniacal odor, used as a solvent and an intermediate for chemical reactions. There are no data on occupational exposure in Poland. N-Methylformamide is very well absorbed into the human body. The LD50 values for N-methylformamide administered to animals in various routes are similar (2600 ÷ 4000 mg/kg bw). After single or short-term administration of the compound in doses of 100 ÷ 1200 mg/kg bw. worsening symptoms of liver damage have been observed. No-observed adverse effect concentration (NOAEC) was established at 120 mg/m3 (two-week inhalation exposure in rats). Increase of hepatotoxic effect of N-methylformamide were observed at concentrations of 320 mg/m3 and 980 mg/m3. There are no data on sub-chronic, chronic and carcinogenic effects of the compound in laboratory animals. N-Methylformamide was not mutagenic and genotoxic. It caused embryotoxic and teratogenic effects. The NOAEC value (120 mg/m3) was used as the basis for determining the MAC (maximum acceptable concentration) value for N-methylformamide, and the MAC value for N-methylformamide was calculated at 3.3 mg/m3. There are no basis to determine the short-term value (STEL) and biological limit value (BLV). It has been proposed to label the compound as "Ft" (toxic for reproduction) and "skin" (skin absorption of the substance may be as important as inhalation exposure). This article discusses the problems of occupational safety and health, which are covered by health sciences and environmental engineering

Impacts of Microcystins on Morphological and Physiological Parameters of Agricultural Plants: A Review.

Cyanobacteria are a group of photosynthetic prokaryotes that pose a great concern in the aquatic environments related to contamination and poisoning of wild life and humans. Some species of cyanobacteria produce potent toxins such as microcystins (MCs), which are extremely aggressive to several organisms, including animals and humans. In order to protect human health and prevent human exposure to this type of organisms and toxins, regulatory limits for MCs in drinking water have been established in most countries. In this regard, the World Health Organization (WHO) proposed 1 µg MCs/L as the highest acceptable concentration in drinking water. However, regulatory limits were not defined in waters used in other applications/activities, constituting a potential threat to the environment and to human health. Indeed, water contaminated with MCs or other cyanotoxins is recurrently used in agriculture and for crop and food production. Several deleterious effects of MCs including a decrease in growth, tissue necrosis, inhibition of photosynthesis and metabolic changes have been reported in plants leading to the impairment of crop productivity and economic loss. Studies have also revealed significant accumulation of MCs in edible tissues and plant organs, which raise concerns related to food safety. This work aims to systematize and analyze the information generated by previous scientific studies, namely on the phytotoxicity and the impact of MCs especially on growth, photosynthesis and productivity of agricultural plants. Morphological and physiological parameters of agronomic interest are overviewed in detail in this work, with the aim to evaluate the putative impact of MCs under field conditions. Finally, concentration-dependent effects are highlighted, as these can assist in future guidelines for irrigation waters and establish regulatory limits for MCs.

Enteral Delivery of Posaconazole or Izavuconazole in Patients with Inability to Swallow Tablets Can Achieve Therapeutic Drug Levels: A Single Center Pilot Study

<h3>Purpose</h3> One of the most common challenges facing the transplant population are invasive fungal infections including aspergillosis, mucormycosis, and those due to endemic fungi. Fungal prophylaxis is becoming standard of practice to limit development of invasive fungal infections. Isavuconazole and posaconazole are commonly used antifungal medications as both prophylaxis and treatment. These drugs are approved for oral and intravenous (IV) administration however, use via alternative enteric routes have not been well studied. <h3>Methods</h3> A retrospective chart review was conducted of transplant patients receiving triazole therapy for prophylaxis or treatment over a seven month period. Patients with an inability to swallow oral medications switched during their course of care from IV therapy to non-oral enteric administration of isavuconazole or posaconazole via nasogastric, orogastric, percutaneous endoscopic gastrostomy (PEG), or percutaneous endoscopic gastrojejunostomy (PEG-J) tubes were included in the study. <h3>Results</h3> We identified 17 patients administered isavuconazole or posaconazole via non-oral enteric routes (Table 1). The indication for therapy was primarily for prophylaxis after single or double lung transplantation. The majority (83%) of cases were therapeutic at the time of their first drug level assessment, with a mean level of 2.47 +/- 0.71 for isavuconazole and 0.84 +/- 1.03 for posaconazole. All patients not therapeutic at initial assessment had doses increased and subsequently achieved therapeutic levels. <h3>Conclusion</h3> Our case series shows isavuconazole and posaconazole can be administered via non-oral enteric routes with therapeutic drug monitoring to achieve acceptable serum drug concentrations and avoid prolonged IV therapy in a transplant population. Given the increasing complexity and age of transplant recipients, continued studies are needed to address alternative antifungal dosing regimens.

Enzymatic biofilm destabilisation to support mechanical cleansing of inserted dental implant surfaces: an in-vitro pilot study

Peri-implantitis is caused by microbial contamination and biofilm formation on the implant surface. To achieve re-osseointegration, the microbes must be completely removed from the surface. Adjunctive to mechanical cleaning, chemical treatment with enzymes or other substances could optimise the treatment outcome. Therefore, we investigated the efficacy of different enzymes, a surfactant, and a chelator in destabilising dental polymicrobial biofilm. The biofilm destabilising effect of the glycosidases α-amylase, dextranase, DispersinB®, and lysozyme, as well as the proteinase subtilisin A, and the nuclease Benzonase®, the chelator EDTA, and the surfactant cocamidopropyl betaine were investigated on biofilms, inoculated with plaque on rough titanium discs. The test and the control solutions were incubated for 15 min at 36 °C on biofilms, and loosened biofilm mass was removed by shear stress with a shaker. Fluorescence-stained biofilms were microscopically analysed. Acceptable cell tolerability concentrations of test substances were determined by the MTT (tetrazolium dye) assay on the MG-63 cell line. A statistically significant biofilm destabilising effect of 10% was shown with lysozyme (2500 µg/ml).

Identification of NSAIDs as lipoxygenase inhibitors through highly sensitive chemiluminescence method, expression analysis in mononuclear cells and computational studies

Here we report the inhibitory effects of nine non-steroidal anti-inflammatory drugs (NSAIDs) on soybean 15-lipoxygenase (15-LOX) enzyme (EC 1.13.11.12) by three different methods; UV-absorbance, colorimetric and chemiluminescence methods. Only two drugs, Ibuprofen and Ketoprofen, exhibited enzyme inhibition by UV-absorbance method but none of the drug showed inhibition through colorimetric method. Chemiluminescence method was found highly sensitive for the identification of 15-LOX inhibitors and it was more sensitive and several fold faster than the other methods. All tested drugs showed 15-LOX-inhibition with IC50 values ranging from 3.52 ± 0.08 to 62.6 ± 2.15 µM by chemiluminescence method. Naproxen was the most active inhibitor (IC50 3.52 ± 0.08 µM) followed by Aspirin (IC50 4.62 ± 0.11 µM) and Acetaminophen (IC50 6.52 ± 0.14 µM). Ketoprofen, Diclofenac and Mefenamic acid showed moderate inhibitory profiles (IC50 24.8 ± 0.24 to 39.62 ± 0.27 µM). Piroxicam and Tenoxicam were the least active inhibitors with IC50 values of 62.6 ± 2.15 µM and 49.5 ± 1.13 µM, respectively. These findings are supported by expression analysis, molecular docking studies and density functional theory calculations. The expression analysis and flow cytometry apoptosis analysis were carried out using mononuclear cells (MNCs) which express both human 15-LOX and 5-LOX. Selected NSAIDs did not affect the cytotoxic activity of MNCs at IC50 concentrations and the cell death showed dose dependent effect. However, MNCs apoptosis increased only at the higher concentrations, demonstrating that these drugs may not induce loss of immunity in septic and other inflammatory conditions at the acceptable inhibitory concentrations. The data collectively suggests that NSAIDs not only inhibit COX enzymes as reported in the literature but soybean 15-LOX and MNCs LOXs are also inhibited at differential values. A comparison of the metabolomics studies of arachidonic acid pathway after inhibition of either COX or LOX enzymes may reconfirm these findings.

Comparison of co-metabolic and direct metabolic biodegradation of MTBE: Monitoring main intermediates and SBR stable operation

The present study aimed to compare aerobic biodegradation of MTBE and its intermediate products through a microbial consortium obtained from sludge of municipal wastewater treatment by co-metabolism and direct metabolism via Sequencing Batch Reactor (SBR) method in laboratory scale. For this purpose, the maximum MTBE concentrations, acclimatization speed and duration, shock loading resistance, degradation of intermediate products, bacterial growth, and sludge quality were compared for both metabolisms. MTBE and COD removal efficiencies were 98% and 81%, respectively for co-metabolism and 84% and 93%, respectively for direct metabolism at the highest acceptable MTBE concentration equal to 180 mg/L. This indicates acceptable performance of both processes in MTBE biodegradation. Furthermore, the degradation of intermediate products including tert-Butyl Formate (TBF), tert-Butyl Alcohol (TBA), formaldehyde, and acetone indicated that both metabolites are able to degrade these products. Well-settled sludge was ultimately obtained in both metabolisms. Based on the results, the acclimatization period for co-metabolism was shorter. However, the system was stabilized in a shorter time in direct metabolism and the resulting microbial consortium was more resistance to shock loading. Therefore, the acclimatization of the microbial consortium through direct metabolism has better performance, which is recommended to be used in MTBE biodegradation. • Acceptable MTBE and COD removal efficiency by co-metabolism and direct metabolism. • Monitoring of MTBE and its intermediate products by spectrophotometric method. • Faster adaptation in co-metabolism and higher shock resistance in direct metabolism. • Less time required to achieve stable biological operation in direct metabolism.

Antimicrobial properties, anti-virulence activities, and physico-mechanical characteristics of orthodontic adhesive containing C-phycocyanin: a promising application of natural products.

Antimicrobial orthodontic adhesives aim to reduce enamel demineralization, white spot lesions, and incipient tooth decay around bonded orthodontic brackets, but they should not imperil its mechanical properties. To evaluate the antimicrobial and physico-mechanical properties of acrylic containing different concentrations of C-phycocyanin on Streptococcus mutans, Lactobacillus acidophilus, and Candida albicans. The mechanical properties of acrylic resins were measured by flexural strength test after preparation of acrylic resin samples with concentrations of 1%, 2%, 5%, 7.5%, and 10% of C-phycocyanin. Then we evaluated the antimicrobial effects of acrylic resin containing the maximum concentration of C-phycocyanin with clinically acceptable flexural strength and the changes in expression of virulence factors. The highest and lowest means of flexural strength were obtained in acrylic resins containing 0% and 10% concentrations of C-phycocyanin at 50.2±4.5 and 30.1±3.3 MPa, respectively. Adding 1%, 2%, and 5% of C-phycocyanin showed no significant decrease in flexural strength (p>0.05). The maximum mean diameter of the growth inhibition zone was observed around discs containing 5% of C-phycocyanin. Until day 30 of the study, no microbial biofilms were formed on any acrylic disc. Only microbial biofilms of C. albicans were able to form on discs containing 5% of C-phycocyanin at 90 days. 5% C-phycocyanin could significantly decrease the expression levels of gtfB, hsp16, and ALS9 6.1-, 7.3-, and 3.9-fold, respectively. It can be concluded that the most acceptable concentration of C-phycocyanin in acrylic resin is 5% based on the results of flexural strength tests and antimicrobial activities of acrylic resin containing various concentrations of C-phycocyanin.

Effect of Zataria multiflora Boiss. essential oil, NaCl, acid, time, and temperature on the growth of Listeria monocytogenes strains in broth and minced rainbow trout.

The small outbreaks of listeriosis as one of the leading causes of food poisoning‐associated deaths occur more than previously reported. In current study, the growth ability of Listeria monocytogenes strains isolated from different sources of food and human origin was measured under salt stress (0.5%, 2.5%, 5%, 7.5%, and 10%) and acid environments (pH = 6.64 and 5.77) for 96 hr by using a Bioscreen C microbiology reader at 37°C. In further steps of this study, after analysis of constituents of Zataria multiflora Boiss. essential oil (ZMEO), the sensory evaluation of the treated fish meat with ZMEO was performed. Then, the fish isolate of L. monocytogenes was exposed to sensory acceptable and subminimum inhibitory concentrations (subMICs) of ZMEO in fish broth and minced fish meat during incubation at abuse (12°C), room (22°C), and optimum (37°C) temperatures for 48 hr. The MIC of NaCl against four strains of L. monocytogenes was 10% at 37°C. The maximum optical densities (ODs) and under curve areas (AUC) of growth patterns in higher pH value and lower contents of NaCl followed the order of 21C > 6F > 66C > 22C of L. monocytogenes strains, while the lag time was prolonged in the reverse order. The maximum OD, growth, and lag times of samples treated with higher contents of NaCl and lower pH value were affected in a different order. The organoleptic evaluation showed that the fish meat treated with less than 0.5% of ZMEO was sensory acceptable. The population of L. monocytogenes remained relatively constant at the inoculation level of 107 cfu/ml (or g) at 12°C in broth and minced fish mediums. The inhibitory antilisterial activity of essential oil as an extensive‐used plant for food and pharmacological applications is negligible due to possible adverse sensory and toxic effects at relevant high doses.

Co2 Capture and Work Environmental Sampling - Lessons Learned

With almost a decade of operational experience from an amine-based post combustion carbon capture plant in Norway, Technology Centre Mongstad has under multiple occasions and operating scenarios monitored the work environment exposure risk for such facilities. Primary focus has been on concentrations of Nitrosodimethylamine in the work environmental atmosphere. This paper presents some findings from work environmental gas sapling collected between 2012 and 2020, where Thermosorb-N filters, impingers and PTR-MS were used for sampling. The main objective has been to investigate work environment exposure risk in a CO2 capture plant. The findings show that the median outdoor background concentration during the different test campaigns have been 0.2 ng/m3(Arithmetic Mean 5.8 ng/m3, range <0.01 - 39 ng/m3). The average and maximum concentration represents 3% and 20% of the given Occupational Exposure Limit Value of 200 ng/m3 for NDMA, respectively. Our results suggest that Nitrosodimethylamine can be present at an amine-based CO2-capture test plant, but at acceptable concentrations. In conclusion, the design and operational conditions at Technology Centre Mongstad maintain exposure background levels for the working atmosphere at a satisfactory level.

Influence of Physicochemical Characteristics of Bean Crop Soil in Trichoderma spp. Development

Spain has ranked 6th on the harvested bean area and 8th in bean production in the European Union (EU). The soils of this area have mixed silt loam and sandy loam texture, with moderate clay content, neutral or acidic pH, rich in organic matter and low carbonate levels, providing beans with high water absorption capacity and better organoleptic qualities after cooking. Similar to other crops, it is attacked by some phytopathogens. Hitherto, chemical methods have been used to control these organisms. However, with the Reform of the Community Agrarian Policy in the EU, the number of authorized plant protection products has been reduced to prevail food security, as well as to be sustainable in the long term, giving priority to the non-chemical methods that use biological agents, such as Trichoderma. This study aimed to investigate the relative importance of various crop soil parameters in the adaptation of Trichoderma spp. autoclaved soils (AS) and natural soils (NS) from the Protected Geographical Indication (PGI) “Alubia La Bañeza—León” that were inoculated with Trichoderma velutinum T029 and T. harzianum T059 and incubated in a culture chamber at 25 °C for 15 days. Their development was determined by quantitative PCR. Twelve soil samples were selected and analyzed from the productive zones of Astorga, La Bañeza, La Cabrera, Esla-Campos and Páramo. Their physicochemical characteristics were different by zone, as the texture of soils ranged between sandy loam and silt loam and the pH between strongly acid and slightly alkaline, as well as the organic matter (OM) concentration between low and remarkably high. Total C and N concentrations and their ratio were between medium and high in most of the soils and the rest of the micronutrients had an acceptable concentration except for Paramo’s soil. Both Trichoderma species developed better in AS than in NS, T. velutinum T029 grew better with high levels of OM, total C, ratio C:N, P, K, Fe, and Zn than T. harzianum T059 in clay soils, with the highest values of cation exchange capacity (CEC), pH, Ca, Mg and Mn. These effects were validated by Canonical Correlation Analysis (CCA), texture, particularly clay concentration, OM, electrical conductivity (EC), and pH (physical parameters) and B and Cu (soil elements) are the main factors explaining the influence in the Trichoderma development. OM, EC, C:N ratio and Cu are the main soil characteristics that influence in T. velutinum T029 development and pH in the development of T. harzianum T059.

Development of surface water exposure scenarios for risk assessment of pesticides in Korea

Surface water exposure scenarios used in the risk assessment of Korea's aquatic ecosystems, were developed to represent the 90th percentile pesticide exposure situation as a part of the country's pesticide registration procedure. The scenarios are used to estimate the pesticide concentration in the water of a rice paddy and small streams for three protection goals: (i) mudfish in rice paddies, (ii) the aquatic ecosystem of small streams located near rice paddies, and (iii) the aquatic ecosystem of small streams located near fruit orchards. The scenarios were derived taking into account major exposure routes, such as spray drift, runoff, and drainage. The scenarios were parameterized for appropriate models including the pesticide root zone model (PRZM) and the toxic substances in surface waters model (TOXSWA). A total of 17 pesticide compounds and 28 formulated products were selected to test the risk assessment using the developed scenarios. The simulated predicted environmental concentrations (PECs) fully reflected a) the exposure routes for each protection goal b) the use patterns of the products c) physicochemical properties of the pesticides, and d) meteorological conditions of Korea. However, while assessing the risks for aquatic organisms we observed that for most of the selected pesticides the calculated exposure concentrations were higher than the regulatory acceptable concentration (RAC). To implement the exposure scenarios and models for pesticide authorization in Korea, further research on the RACs is needed. We also recommend studies to develop a higher-tier model and risk-mitigation measures that can be applied to the Korean situation.

Elemental measurements and health risk assessment of sub-Saharan African medicinal plants used for cardiovascular diseases’ and related risk factors’ treatment

BackgroundDietary factors have been noted to influence the development of cardiovascular diseases (CVDs) which are the number one global cause of death. In this study, the nutritional importance and human health risk of the minerals composition of 20 medicinal plants’ (MPs) parts used for treating CVDs and related risk factors in sub-Saharan Africa (SSA) were assessed. MethodsInductively coupled plasma technology was used for determining the minerals composition of the MPs while human health risk assessment was based on hazard quotients, hazard indexes and non-carcinogenic risk analysis of the studied heavy metals. ResultsThe investigation showed varied level of minerals in the studied MPs’ parts with K having the highest concentration in most. Although level of some elements inM. lucida, V. amygdalina leaves, T. cacao seed and Z. officinale rhizome revealed their possibility in preventing the occurrence of atherosclerosis, unsafe levels of some trace elements were recorded in M. lucida and V. amygdalina leaves. V. amygdalina leaves and A. cepa bulb also had their Pb contents higher than the WHO/FAO Codex permitted maximum level for leafy and bulb vegetables, respectively. In spite of the desirable Na/K and Zn/Cu ratios in all the tested MPs with their Cd and Pb levels below the WHO recommended maximum levels for dried medicinal plant materials, health risk assessment showed that habitual use of almost all of the studied MPs would present an unacceptable risk of non-carcinogenic effects on health. With the exception of S. aromaticum flower bud and T. tetraptera fruit, principal component and hierarchical cluster analyses of other plants’ parts (MPs’ parts aside from the leaves) analysed provided a distinction between MPs which have found food applications and those solely used for medicinal purposes. ConclusionsThe study revealed that type of MP, plants’ part, maturity stage, agricultural practice, growing environment and conditions, are among the factors determining the safety of plant materials used for CVDs’ and related risk factors’ treatment in SSA. To protect the lives of CVDs patients who rely on traditional medicine for treatment, government of SSA countries and relevant authorities need to set a regulatory limit for maximum acceptable concentration of minerals in MPs used in the region. Assessment of the physicochemical properties and pollution level of soil used for cultivation of these MPs is also encouraged.

Influence of different agroecological conditions of southern Russia on quality indicators of raw milk

Aim. To demonstrate the high adaptive abilities of dairy cattle to various ecosystems and natural zones of the Lower Volga at different times of the year. For the study we selected farms located in the steppe and semi-desert natural zones of the Volgograd region where animals of different breeds are reared.Material and Methods. Analysis was undertaken of the main indicators of raw milk quality, amino acid composition and environmental safety. Animals of all farms studied showed fairly high indicators of milk productivity in the climatic conditions of the Volgograd region, according to the standards of the breeds investigated.Results. The content of essential amino acids in cow milk for all groups varied depending on the breed and period of the year, generally reaching maximum values in winter. The calculation of amino acid scores showed that lysine is a limiting amino acid in animals of the Holstein-Friesian breed in the summer and autumn periods of lactation. The determination of chemical elements in milk during the summer period of lactation showed that all indicators are within acceptable concentrations, including heavy metals (lead, arsenic, cadmium, mercury).Conclusion. The research conducted confirms compliance of raw milk with standards in all farms studied for the main controlled indicators of quality and amino acid composition, content of chemical elements and allows recommendation of the milk produced for the production of all types of dairy and fermented milk products.

Polymorphism of genes controlling phase I and II detoxification in phenol-exposed women with spontaneous miscarriage diagnosis

The environmental issues in contemporary megapolis require studying of multiple candidate genes that may contribute to occurrence of reproductive disorders. Exogenous phenol compounds are contaminants that produce negative effects upon female reproductive system. Detoxification genes from CYP450 and GSTs family belong to the I and II detoxification phases of xenobiotics including phenols. Our goal was to examine some features of polymorphism in I and II phase detoxication genes in women with diagnosed miscarriage who were subjected to excessive phenol exposure. The test group consisted of 37 women who had miscarriage; the reference group included 41 conditionally healthy women. All the examined women lived under airborn exposure to phenol (an average of 1.0 daily minimal acceptable concentration). The following parameters were examined in both groups: phenol contents in blood were detected with capillary gas chromatography; polymorphisms of CYP1A1 rs1048943 Ile462Val, CYP1A1_3 rs4646421 C6310T, GSTA4 rs3756980 T/C, GSTP1 rs1695 Ile105Val, GSTP1 rs1138272, and Ala114Val genes were revealed with polymerase chain reaction. There were significant discrepancies between the examined groups, both for phenol contents in blood, compared to upper standardized limits (p 0.05). The examined gene polymorphisms fit the Hardy–Weinberg rule. Statistical analysis in multiplicative inheritance model allowed us to show that A allele in CYP1A1 rs1048943 Ile462Val gene, and A allele in GSTP1 rs1695 Ile105Val gene could be the factors associated with probable miscarriage risk in case of excessive contamination of biological media with exogenous estrogens (e.g., phenol). The examined gene polymorphisms may be suggested as marker genes for early prediction of miscarriage risk, when excessive contents of exogenous estrogen imitator (phenol) are present in biological media.

Wastewater-based epidemiology-surveillance and early detection of waterborne pathogens with a focus on SARS-CoV-2, Cryptosporidium and Giardia.

Waterborne diseases are a major global problem, resulting in high morbidity and mortality, and massive economic costs. The ability to rapidly and reliably detect and monitor the spread of waterborne diseases is vital for early intervention and preventing more widespread disease outbreaks. Pathogens are, however, difficult to detect in water and are not practicably detectable at acceptable concentrations that need to be achieved in treated drinking water (which are of the order one per million litre). Furthermore, current clinical-based surveillance methods have many limitations such as the invasive nature of the testing and the challenges in testing large numbers of people. Wastewater-based epidemiology (WBE), which is based on the analysis of wastewater to monitor the emergence and spread of infectious disease at a population level, has received renewed attention in light of the current coronavirus disease 2019 (COVID-19) pandemic. The present review will focus on the application of WBE for the detection and surveillance of pathogens with a focus on severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and the waterborne protozoan parasites Cryptosporidium and Giardia. The review highlights the benefits and challenges of WBE and the future of this tool for community-wide infectious disease surveillance.