Accelerator Test Facility Research Articles

A general Bayesian algorithm for the autonomous alignment of beamlines.

Autonomous methods to align beamlines can decrease the amount of time spent on diagnostics, and also uncover better global optima leading to better beam quality. The alignment of these beamlines is a high-dimensional expensive-to-sample optimization problem involving the simultaneous treatment of many optical elements with correlated and nonlinear dynamics. Bayesian optimization is a strategy of efficient global optimization that has proved successful in similar regimes in a wide variety of beamline alignment applications, though it has typically been implemented for particular beamlines and optimization tasks. In this paper, we present a basic formulation of Bayesian inference and Gaussian process models as they relate to multi-objective Bayesian optimization, as well as the practical challenges presented by beamline alignment. We show that the same general implementation of Bayesian optimization with special consideration for beamline alignment can quickly learn the dynamics of particular beamlines in an online fashion through hyperparameter fitting with no prior information. We present the implementation of a concise software framework for beamline alignment and test it on four different optimization problems for experiments on X-ray beamlines at the National Synchrotron Light Source II and the Advanced Light Source, and an electron beam at the Accelerator Test Facility, along with benchmarking on a simulated digital twin. We discuss new applications of the framework, and the potential for a unified approach to beamline alignment at synchrotron facilities.

Fabrication and testing of the transition section between modules of a wakefield accelerator

The fabrication process is presented for a typical transition section located between each cylindrical corrugated waveguide structure comprising the wakefield accelerator module. The transition section includes couplers for extracting the 180 GHz TM01 accelerating mode and separate couplers for extracting the 190 GHz HE11 dipole mode, both modes induced by the electron bunch traversing the cylindrical corrugated waveguide structure. Extraction of the high-power accelerating mode reduces the heat load due to the subterahertz wave power dissipation within the corrugated accelerating structure. Extraction of the low-power dipole mode serves the purpose of detecting the electron bunch transverse oscillations within the wakefield accelerator and identifying the onset of beam breakup instability. Comprehensive testing of the fully functional transition section with an electron beam was done at the Accelerator Test Facility in Brookhaven National Laboratory which verified the functionality of the transition section. Published by the American Physical Society 2024

Hard X-ray inverse Compton scattering at photon energy of 87.5 keV

Production of hard X-ray via inverse Compton scattering at photon energies below 100 keV range aimed at potential applications in medicine and material research is reported. Experiments have been performed at the Brookhaven National Laboratory, Accelerator Test Facility, employing the counter collision of a 70 MeV, 0.3 nC electron beam with a near infra-red Nd: YAG laser (1064 nm wavelength) pulse containing ~ 100 mJ in a single shot basis. The radiation distribution of the scattered photon beam is assessed to be sufficiently quasi monochromatic to produce clear contrast from the Au K- edge at 80.7 keV.

Accelerator beam phase space tomography using machine learning to account for variations in beamline components

We describe a technique for reconstruction of the four-dimensional transverse phase space of a beam in an accelerator beamline, taking into account the presence of unknown errors on the strengths of magnets used in the data collection. Use of machine learning allows rapid reconstruction of the phase-space distribution while at the same time providing estimates of the magnet errors. The technique is demonstrated using experimental data from CLARA, an accelerator test facility at Daresbury Laboratory.

Results of manufacturing and operation of the first accelerating structures for the linear accelerator of the SKIF injector based on a disk-loaded waveguide

The linear accelerator of the Siberian Circular Photon Source is being developed at Budker Institute of Nuclear Physics of the Siberian Branch of the Russian Academy of Sciences (BINP SB RAS). The test accelerator facility with the RF gun, the bunching system, the pre-accelerator and the first regular accelerating structuresoperates at Budker Institute of Nuclear Physics. The aim of work at this facility is to demonstrate the performance of the basic system of the linear accelerator, including the accelerating structures. This paper presents the first accelerating structures for the linear accelerator of the SKIF injector produced at BINP SB RAS.

Transverse phase space tomography in an accelerator test facility using image compression and machine learning

We describe a novel technique, based on image compression and machine learning, for transverse phase space tomography in two degrees of freedom in an accelerator beamline. The technique has been used in the CLARA accelerator test facility at Daresbury Laboratory: results from the machine learning method are compared with those from a conventional tomography algorithm (algebraic reconstruction) and applied to the same data. The use of machine learning allows reconstruction of the 4D phase space distribution of the beam to be carried out much more rapidly than using conventional tomography algorithms and also enables the use of image compression to reduce significantly the size of the data sets involved in the analysis. Results from the machine learning technique are at least as good as those from the algebraic reconstruction tomography in characterizing the beam behavior, in terms of the variation of the beam size in response to variation of the quadrupole strengths.

Fabrication and testing of corrugated waveguides for a collinear wakefield accelerator

Significant progress has been made at Argonne National Laboratory in the development of a compact wakefield accelerator based on a cylindrical corrugated waveguide with a 2-mm ID and fine corrugations on the wall. The fabrication process of 10-cm-long corrugated waveguide structures has been established and a high quality of the final product has been confirmed by precision metrology. Several samples have been tested using the electron beam at Brookhaven National Laboratory's Accelerator Test Facility. The frequency and group velocity of the fundamental monopole ${\mathrm{TM}}_{01}$ mode of sub-terahertz \ifmmode \check{C}\else \v{C}\fi{}erenkov radiation produced by a 1.5-ps-long electron bunch propagating in the corrugated waveguide, as well as the frequencies of the dipole ${\mathrm{HEM}}_{11}$ and the quadrupole ${\mathrm{HEM}}_{21}$ modes have been measured and found to be in good agreement with the design values calculated using CST Microwave Studio. The energy modulation of a 5-ps-long electron bunch caused by the self-induced wakefield has also been measured and found to be in good agreement with the calculated values.

LLRF Upgrade at the Argonne Wakefield Accelerator Test Facility

LLRF Upgrade at the Argonne Wakefield Accelerator Test Facility

Upgrade to the EPICS Control System at the Argonne Wakefield Accelerator Test Facility

Upgrade to the EPICS Control System at the Argonne Wakefield Accelerator Test Facility

Momentum bandwidth of the KEK Accelerator Test Facility 2

Momentum bandwidth is an important characteristic for final focus systems (FFS) of future high-energy colliders. A large momentum bandwidth is a notable feature of the novel local-chromaticity-correction FFS, being demonstrated at the KEK Accelerator Test Facility 2 (ATF2), owing to the locality of chromaticity correction. In this article, analytical estimations and simulations of momentum bandwidth for various optics of ATF2 are presented. Possible deviations of the momentum bandwidth due to realistic machine imperfections are studied. Experimental measurements at ATF2 following successful tuning of small vertical beam size at the interaction point (IP) are also described, which agree well with numerical predictions and further verify the robustness of the local chromaticity correction scheme.

A sub-micron resolution, bunch-by-bunch beam trajectory feedback system and its application to reducing wakefield effects in single-pass beamlines

A high-precision intra-bunch-train beam orbit feedback correction system has been developed and tested in the ATF2 beamline of the Accelerator Test Facility at the High Energy Accelerator Research Organization in Japan. The system uses the vertical position of the bunch measured at two beam position monitors (BPMs) to calculate a pair of kicks which are applied to the next bunch using two upstream kickers, thereby correcting both the vertical position and trajectory angle. Using trains of two electron bunches separated in time by 187.6 ns, the system was optimised so as to stabilize the beam offset at the feedback BPMs to better than 350 nm, yielding a local trajectory angle correction to within 250 nrad. The quality of the correction was verified using three downstream witness BPMs and the results were found to be in agreement with the predictions of a linear lattice model used to propagate the beam trajectory from the feedback region. This same model predicts a corrected beam jitter of c. 1 nm at the focal point of the accelerator. Measurements with a beam size monitor at this location demonstrate that reducing the trajectory jitter of the beam by a factor of 4 also reduces the increase in the measured beam size as a function of beam charge by a factor of c. 1.6.

Wakefield effects and mitigation techniques for nanobeam production at the KEK Accelerator Test Facility 2

The ATF2 beam line at KEK was built to validate the operating principle of a novel final-focus scheme devised to demagnify high-energy beams in future linear lepton colliders; to date vertical beam sizes as small as 41 nm have been demonstrated. However, this could only be achieved with an electron bunch intensity $\ensuremath{\sim}10%$ of nominal, and it has been found that wakefield effects limit the beam size for bunch charges approaching the design value of ${10}^{10}{e}^{\ensuremath{-}}$. We present studies of the impact of wakefields on the production of ``nanobeams'' at the ATF2. Wake potentials were evaluated for the ATF2 beam line elements and incorporated into a realistic transport simulation of the beam. The effects of both static (component misalignments and rolls, magnet strength errors and beam position monitor resolution) and dynamic (position and angle jitter) imperfections were included and their effects on the beam size evaluated. Mitigation techniques were developed and applied, including orbit correction, dispersion-free steering, wakefield-free steering, and interaction point tuning knobs. Explicit correction knobs to compensate for wakefield effects were studied and applied, and found to significantly decrease the intensity dependence of the beam size.

Development of preliminary transfer functions for performance predictions in FlexPAVE™

Mechanistic-empirical design and performance-related specifications are state-of-the-art tools for designing pavements and determining incentives/disincentives for paving contracts. These methods require the reliable prediction of pavement performance throughout the pavement’s design life. One such prediction program is FlexPAVE™, which applies three-dimensional viscoelastic finite element analysis with moving loads to calculate the pavement’s mechanical responses under traffic loading and given climate data. The simplified viscoelastic continuum damage model and shift model are used to calculate the fatigue damage in the pavement’s cross-section and the rut depths, respectively. With regard to fatigue damage, a fatigue transfer function is needed to convert the computed cross-sectional damaged area (i.e., the damage level) to the cracked area on the pavement surface. With regard to rut depth, a rutting transfer function is needed to calibrate the predicted rut depths. In this study, preliminary transfer functions for the predicted fatigue damage and rut depths were developed using four sets of field measurement data obtained from test sections in the United States, Canada, and South Korea that include interstate highways and an accelerated testing facility. Good agreement between the predicted performance and field observations was found after calibration of FlexPAVE™.

Tuning the ultralow β* optics at the KEK Accelerator Test Facility 2

For future linear colliders, a nanometer-scale beam size at the interaction point (IP) is one of the most challenging technical aspects. To explore the feasibility of a final focus system with a high chromaticity level, comparable to that of the Compact Linear Collider, the ultralow ${\ensuremath{\beta}}^{*}$ optics has been proposed and tuned at the KEK Accelerator Test Facility 2. In this paper, the recent experimental results are presented, which demonstrate the capability of achieving and stabilizing a vertical average beam size of 60 nm and below at the virtual IP. The observed vertical beam size is about 20 nm above the numerical predictions in the presence of static and dynamic imperfections. We interpret this discrepancy as beam size growth due to multipole fields, beam jitters and wakefield effects, and diagnostic errors.

Single Event Upsets characterization of 65 nm CMOS 6T and 8T SRAM cells for ground level environment

We present experimental results of the cross-section related to cosmic-ray irradiation at ground level for minimum-sized six-transistor (6T) and eight-transistor (8T) bit-cells SRAM memories implemented on a 65 nm CMOS standard technology. Results were obtained from accelerated irradiation tests performed in the mixed-field irradiation facility of the CERN High-energy Accelerator test facility (CHARM) at the European Organization for Nuclear Research in Geneva, Switzerland. A 1.45× higher SEU cross-section was observed for 6T-cell designs despite the larger area occupied by the 8T cells (1.5× for MCU). Moreover, the trend for events affecting multiple bits was higher in 6T-cells. The cross-section obtained values show that the memories have enough sensitivity to be used as a radiation monitors in high energy physics experiments.

Transverse phase space characterization in an accelerator test facility

We compare three techniques for characterising the transverse phase space distribution of the beam in CLARA FE (the Compact Linear Accelerator for Research and Applications Front End, at Daresbury Laboratory, UK): emittance and optics measurements using screens at three separate beamline locations; quadrupole scans; and phase space tomography. We find that where the beam distribution has significant structure (as in the case of CLARA FE at the time the measurements presented here were made) tomography analysis is the most reliable way to obtain a meaningful characterisation of the transverse beam properties. We present the first experimental results from four-dimensional phase space tomography: our results show that this technique can provide an insight into beam properties that are of importance for optimising machine performance.

Noninvasive Micrometer-Scale Particle-Beam Size Measurement Using Optical Diffraction Radiation in the Ultraviolet Wavelength Range

We present recent achievements in the application of optical diffraction radiation (ODR) to the measurement of the transverse beam size of a 1.3 GeV micrometer-size electron beam performed with an instrument installed in the extended extraction line of the KEK Accelerator Test Facility. ODR is a recent technique for the measurement of the transverse size and emittance of highly relativistic particle beams. ODR has the advantage of being a noninvasive and relatively inexpensive technique and is a candidate for the operation of linear particle accelerators, where no simple alternatives (e.g., synchrotron radiation) are available. In an effort to improve the resolution and performance, we establish an alternative target microfabrication technology, adopt solutions to improve the signal-to-noise ratio, and perform an experiment in the UV spectrum at 250 nm. With such a configuration, a transverse beam size as low as $3\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{m}$ is measured, drastically improving on past measurements reported in the literature. In light of these results, ODR, when combined with a high-resolution optical-transition-radiation monitor, represents a credible diagnostics solution for low-emittance high-intensity particle beams.

Hydrodynamic computational modelling and simulations of collisional shock waves in gas jet targets

We study the optimization of collisionless shock acceleration of ions based on hydrodynamic modelling and simulations of collisional shock waves in gaseous targets. The models correspond to the specifications required for experiments with the $\text{CO}_{2}$ laser at the Accelerator Test Facility at Brookhaven National Laboratory and the Vulcan Petawatt system at Rutherford Appleton Laboratory. In both cases, a laser prepulse is simulated to interact with hydrogen gas jet targets. It is demonstrated that by controlling the pulse energy, the deposition position and the backing pressure, a blast wave suitable for generating nearly monoenergetic ion beams can be formed. Depending on the energy absorbed and the deposition position, an optimal temporal window can be determined for the acceleration considering both the necessary overdense state of plasma and the required short scale lengths for monoenergetic ion beam production.

Channeling and radiation experiments at SLAC

Since 2014, a SLAC-Aarhus-Ferrara-CalPoly collaboration augmented by members of ANL and MIT has performed electron and positron channeling experiments using bent silicon crystals at the SLAC End Station A Test Beam as well as the FACET accelerator test facility. These experiments have revealed a remarkable channeling efficiency of about 24% under our conditions. Volume reflection is even more efficient with almost the whole beam taking part in the reflection process. A positron experiment demonstrated quasi-channeling oscillations for the first time at high beam energy. In our most recent experiment we measured the spectrum of gamma radiation for crystal orientations covering channeling and volume reflection. This series of experiments supports the development of more advanced crystalline devices capable e.g. of producing narrow-band gamma rays with electron beams or studying the interaction of the electrons with the wakefields generated in the crystal at high beam intensity.

Simulation study of CO2 laser-plasma interactions and self-modulated wakefield acceleration

3D numerical simulations of the interaction of a powerful CO2 laser with hydrogen jets demonstrating the role of ionization in the characteristics of induced wakes are presented. Simulations using SPACE, a parallel relativistic particle-in-cell code, are performed in support of the plasma wakefield accelerator experiments being conducted at the Brookhaven National Laboratory (BNL) Accelerator Test Facility (ATF). A novelty of the SPACE code is its set of efficient atomic physics algorithms that compute ionization and recombination rates on the grid and transfer them to particles. The influence of ionization on the spectrum of the pump laser has been studied for a range of gas densities. Simulations reproduce both Stokes and antiStokes shifts in the spectrum of the pump laser, similar to those observed in experiments in the spectrum of the probe. Good agreement has been achieved with the experiments on the effect of variation in gas density on Stokes/antiStokes intensity. In addition, self-injection and trapping of electrons into the self-modulated wakes have been observed and analyzed. The experimentally validated code SPACE will be used for predictive simulations to guide future experiments at BNL ATF.