Accelerate Bone Repair Research Articles

AdipoRon accelerates bone repair of calvarial defect in diet-induced obesity mice

ObjectivesTo investigate the role of AdipoRon in bone wound healing of calvaria critical-sized defects (CSD) in diet-induced obesity (DIO) mice. Materials and methodsAfter establishing the calvaria CSD in normal-chow (NC), DIO and Adiponectin knockout (APNKO) mice, AdipoRon or vehicle was orally gavaged for 3 weeks. The bone defects were analyzed by micro-CT and H&E staining. The expression of osteogenesis-related factor in the defect area, and the chemotactic gradient of SDF-1 between bone marrow and bone defect area were further analyzed. ResultsAdipoRon downregulated body weight and alleviated fasting blood glucose level of DIO mice after treatment with AdipoRon in 14 and 21 days. Newly formed bone was significantly increased in the defect area of DIO and APNKO mice after treatment with AdipoRon compared with vehicle treatment. No significant difference was shown in NC mice. Furthermore, compared with NC mice, a significant decrease of BV/TV%, Tb.N value and formed bone percentage were shown in DIO and APNKO mice. The treatment with AdipoRon could reverse of decreased value and increase the newly formed bone in those mice. AdipoRon promoted col-1α expression in wound sites in DIO and APNKO mice. AdipoRon nearly quadrupled the chemotactic gradient of SDF-1 by decreasing SDF-1 expression in bone marrow and increasing it in the bone defect area in APNKO and DIO treated mice. ConclusionAdipoRon alleviates the obesity status in DIO mice with calvarial defect and increase new bone formation in calvarial defects in DIO and APNKO mice by modulating chemotactic gradient of SDF-1.

Acceleration of bone repair in critical-size defect using angiopoietin-2 associated with novel carbon nanotubes scaffold via mitophagy-pyroptosis pathway.

To investigate the curative effect of Ang-2 combined with novel carbon nanotubes (CNTs) scaffold critical-size bone defect in rabbits. CNTs with good properties were first prepared by freeze-drying method. The mechanical properties and surface hydrophilicity of scaffolds were improved by adjusting the addition ratio of polylactic acid (LPA) and chitin fibers (CHI). After purification and functionalization of CNTs, CNTs/PLA/CHI three-dimensional porous scaffolds were prepared for animal experiments. Subsequently, the CNTs/PLA/CHI scaffolds were implanted into the rabbit critical-sized radius defect model to evaluate the osteogenic properties in vivo. Adult male New Zealand white rabbits were randomly allocated into three groups. Group A was the control group, and both groups B and C underwent radial bone defect surgery and implanted CNTs/PLA/CHI scaffolds. Animals in group C received a daily local injection of 1 mL of 400 ng/mL Ang-2 dissolved in physiological saline in the bone defect area for up to 14 days after surgery, while group B received the same amount of physiological saline. Scanning electron microscope results showed that the porosity of the CNTs/PLA/CHI three-dimensional porous scaffolds was as high as 80%. The surface contact angle was 35° to 55°, and the hydrophilicity was suitable for cell adhesion and growth. The CNTs/PLA/CHI three-dimensional porous scaffolds had excellent biological properties. The general observation and X-ray imaging after 12 weeks together indicated that the CNTs/PLA/CHI scaffolds could accelerate bone repair with the combination of endogenous angiogenic factor Ang-2. The results of western blotting and histology revealed that the expression of mitophagy proteins LC3, Beclin-1, PINK1 and Parkin was elevated in the new bone, and the expression of pyroptosis proteins Nod-like receptor protein NLRP3, caspase-1 and Gasdermin D (GSDMD) was decreased. Ang-2 associated with CNTs/PLA/CHI scaffolds accelerated bone regeneration through autophagy-pyroptosis pathway.

Application of Bone Marrow-Derived Macrophages Combined with Bone Mesenchymal Stem Cells in Dual-Channel Three-Dimensional Bioprinting Scaffolds for Early Immune Regulation and Osteogenic Induction in Rat Calvarial Defects.

The host immune response to biomaterials is critical for determining scaffold fate and bone regeneration outcomes. Three-dimensional (3D) bioprinted scaffolds encapsulated with living cells can improve the inflammatory microenvironment and further accelerate bone repair. Here, we screened and adopted 8% methacrylamidated gelatin (GelMA)/1% methacrylamidated hyaluronic acid (HAMA) as the encapsulation system for rat bone marrow-derived macrophages (BMMs) and 3% Alginate/0.5 mg/mL graphene oxide (GO) as the encapsulation system for rat bone mesenchymal stem cells (BMSCs), thus forming a dual-channel bioprinting scaffold. The 8% GelMA/1% HAMA/3% Alginate/0.5 mg/mL GO (8/1/3/0.5) group could form a scaffold with a stable structure, good mechanical properties, and satisfied biocompatibility. When exploring the crosstalk between BMMs and BMSCs in vitro, we found that BMSCs could promote the polarization of BMMs to M2 type at the early stage, reduce the pro-inflammatory gene expression, and increase anti-inflammatory gene expression; conversely, BMMs can promote the osteogenic differentiation of BMSCs. In addition, in the model of rat calvarial defects, the dual-channel scaffold encapsulated with BMMs and BMSCs was more effective than the single-cell scaffold and the acellular scaffold. The paracrine of BMMs and BMSCs in the biodegradable dual-channel scaffold effectively promoted the M2-type polarization of macrophages in the microenvironment of early bone defects, avoided excessive inflammatory responses, and further promoted bone repair. In conclusion, our findings suggested that using 3D bioprinting to simultaneously encapsulate two primary cells of BMMs and BMSCs in a dual-channel system may be an effective way to promote bone repair from the perspective of early immune regulation and late induction of osteogenesis.

Gelatin methacryloyl/nanosilicate nanocomposite hydrogels encapsulating dexamethasone with a tunable crosslinking density for bone repair

Despite various strategies have been proposed to accelerate bone regeneration, the treatment of bone defects in critical size still remains a clinical challenge. In this study, we fabricated nanocomposite gelatin methacryloyl (GelMA)/nanosilicate (NS) hydrogels for the delivery of dexamethasone (DEX), and systematically investigated their performance in drug delivery for bone repair. Nanocomposite hydrogels were fabricated by mold casting, and exposed to ultraviolet (UV) light to induce covalent crosslinking. Afterwards, we conducted a systematic characterization study to determine the effects of varying NS concentration, GelMA methacrylation degree and UV exposure time on mechanical, structural, and drug release behaviors of nanocomposite hydrogels. In particular, the higher methacrylation degree of GelMA, longer UV exposure and the presence of NS exhibited gradually enhanced mechanical properties. For instance, the compressive strengths of nanocomposite hydrogels containing 0% (w/v) NS (G0NS120) and 3% (w/v) NS (G3NS120) at 120 s of UV exposure were 194.816 kPa–367.284 kPa (p < 0.001), respectively. Similarly, they exhibited higher swelling ratio (%) and slower degradation rate (%) with longer UV exposure and increased NS amount. Nanocomposite hydrogels revealed slower drug release rate due to longer UV exposure and increased NS amount. At day 14 of the release study, 99.53% and 60.687% of DEX were released from G0NS120 and G3NS120, respectively. Particularly, the nanocomposite GelMA/NS hydrogels supported osteoblast adhesion well, and NS and DEX exhibited synergistic effect on osteoblast proliferation with 5.01 fold increase after 7 days of culture. Our results clearly showed that GelMA/NS nanocomposite hydrogels with tunable physiochemical and drug carrier properties could provide a favorable option for accelerating bone repair.

3D printing of reduced glutathione grafted gelatine methacrylate hydrogel scaffold promotes diabetic bone regeneration by activating PI3K/Akt signaling pathway

Diabetic individuals are frequently associated with increased fracture risk and poor bone healing capacity, and the treatment of diabetic bone defects remains a great challenge in orthopedics. In this study, an antioxidant hydrogel was developed using reduced glutathione grafted gelatine methacrylate (GelMA-g-GSH), followed by 3D printing to form a tissue engineering scaffold, which possessed appropriate mechanical property and good biocompatibility. In vitro studies displayed that benefitting from the sustained delivery of reduced glutathione, GelMA-g-GSH scaffold enabled to suppress the overproduction of reactive oxygen species (ROS) and reduce the oxidative stress of cells. Osteogenic experiments showed that GelMA-g-GSH scaffold exhibited excellent osteogenesis performance, with the elevated expression levels of osteogenesis-related genes and proteins. Further, RNA-sequencing revealed that activation of PI3K/Akt signaling pathway of MC3T3-E1 seeded on GelMA-g-GSH scaffold may be the underlying mechanism in promoting osteogenesis. In vivo, diabetic mice calvarial defects experiment demonstrated enhanced bone regeneration after the implantation of GelMA-g-GSH scaffold, as shown by micro-CT and histological analysis. In summary, 3D-printed GelMA-g-GSH scaffold can not only scavenge ROS, but also promote proliferation and differentiation of osteoblasts by activating PI3K/Akt signaling pathway, thereby accelerating bone repair under diabetes.

Gain-of-Function of FGFR3 Accelerates Bone Repair Following Ischemic Osteonecrosis in Juvenile Mice.

Bone collapse, bone deformity, and a long treatment period are major clinical problems associated with juvenile ischemic osteonecrosis (JIO). Accelerating the process of bone repair in JIO is expected to shorten the treatment duration and better maintain morphology. We previously indicated that both bone formation and resorption were accelerated following distraction osteogenesis-mediated limb lengthening in genetically engineered mutant mice with a gain-of-function mutation in fibroblast growth factor receptor 3 (FGFR3) gene (i.e., Fgfr3 mice). The purpose of this study was to investigate the role of FGFR3 in the bone repair process following surgically induced ischemic osteonecrosis in the mutant mice. Epiphyseal deformity was less in the Fgfr3 mice compared to the wild-type mice at 6weeks following ischemic osteonecrosis in skeletally immature age. Assessment of the morphology by micro-computed tomography (CT) revealed that the trabecular bone volume was increased in the Fgfr3 mice. Dynamic bone histomorphometry revealed increased rates of bone formation and mineral apposition in the Fgfr3 mice at 4weeks post-surgery. The number of tartrate-resistant acid phosphatase (TRAP)-positive cells rapidly increased, and the numbers of TdT-mediated dUTP nick-end labeling (TUNEL)-positive cells rapidly decreased in the Fgfr3 mice. Vascular endothelial growth factor (VEGF) expression was increased at the earlier phase post-surgery in the Fgfr3 mice. The activation of FGFR3 signaling shortens the time needed for bone repair after ischemic osteonecrosis by accelerating revascularization, bone resorption, and new bone formation. Our findings are clinically relevant as a new potential strategy for the treatment of JIO.

In Situ Casting of Platelet Rich Plasma/SiO2/Alginate for Bone Tissue Engineering Application in Rabbit Mandible Defect Model.

The administration of both platelet rich plasma (PRP) and silicon dioxide (SiO2) to the bone defects accelerates bone repair and regeneration. Appli-cation of both of them may show synergistic regenerative effects. Our objective was to evaluate the possible synergistic osteogenic effects of PRP and SiO2 by injecting them using an ad hoc device. In this experimental study, PRP/SiO2 scaffolds were fabricated by in situ casting method with the help of CaCl2 as the gelation factor and alginate as the stroma; and then, the biodegradability and spatial arrangement were assessed. The injecta-ble scaffold was introduced into the 40 rabbit mandibular defects by an ad hoc two-channel injecting device. Five defects received PRP/SiO2/alginate as the treatment; the other sets of defects were treated by PRP/alginate, SiO2/alginate, and the last five defects served as the control groups by getting only alginate injections. The osteogenicity of the scaffolds was evaluated by radiological and histological procedures; they were then compared with each other. Analysis of variance and least significant difference tests were used to analyze the data. The SiO2-treated group showed a significant higher bone area compared to PRP/ SiO2-treated groups on day 40 (p= 0.013). The number of osteocytes was higher in SiO2-treated than the control groups on both 20 and 40 days (p= 0.032 and 0.022, respectively). The number of osteoclast was also higher in SiO2-treated than PRP-treated group (p= 0.028). In addition, the cells of this group had just started to create Haversian systems in newly formed bone tissues. Silica demonstrated a superior osteogenic activity over PRP in both short and long term periods. Evidently, they showed no synergistic regenerative effects. Our ad hoc device was efficiently capable of inserting the scaffolds into the injured sites with no diffi-culties or complications.

Construction of magnetic nanochains to achieve magnetic energy coupling in scaffold

BackgroundFe3O4 nanoparticles are highly desired for constructing endogenous magnetic microenvironment in scaffold to accelerate bone regeneration due to their superior magnetism. However, their random arrangement easily leads to mutual consumption of magnetic poles, thereby weakening the magnetic stimulation effect.MethodsIn this study, magnetic nanochains are synthesized by magnetic-field-guided interface co-assembly of Fe3O4 nanoparticles. In detail, multiple Fe3O4 nanoparticles are aligned along the direction of magnetic force lines and are connected in series to form nanochain structures under an external magnetic field. Subsequently, the nanochain structures are covered and fixed by depositing a thin layer of silica (SiO2), and consequently forming linear magnetic nanochains (Fe3O4@SiO2). The Fe3O4@SiO2 nanochains are then incorporated into poly l-lactic acid (PLLA) scaffold prepared by selective laser sintering technology.ResultsThe results show that the Fe3O4@SiO2 nanochains with unique core–shell structure are successfully constructed. Meanwhile, the orderly assembly of nanoparticles in the Fe3O4@SiO2 nanochains enable to form magnetic energy coupling and obtain a highly magnetic micro-field. The in vitro tests indicate that the PLLA/Fe3O4@SiO2 scaffolds exhibit superior capacity in enhancing cell activity, improving osteogenesis-related gene expressions, and inducing cell mineralization compared with PLLA and PLLA/Fe3O4 scaffolds.ConclusionIn short, the Fe3O4@SiO2 nanochains endow scaffolds with good magnetism and cytocompatibility, which have great potential in accelerating bone repair.

Dual Biosignal-Functional Injectable Microspheres for Remodeling Osteogenic Microenvironment.

Bone defect regeneration depends on the population and lifespan of M2 macrophages, which are regulated by dual signals generated by the "physical" spatial configuration of biological tissues and "molecular" chemokines. Herein, inspired by the reprogramming of macrophages, immunoengineered porous microspheres are constructed to accelerate bone repair through the regulation of both "physical" and "molecular" signals. The porous structure of injectable poly (l-lactic acid) (PLLA) microspheres prepared by the microfluidic technique provides a "physical signal" for osteogenic differentiation. Additionally, interleukin (IL)-4-loaded liposomes (Ls) are modified on PLLA microspheres through amide bonds to produce IL-4/Ls/PLLA microspheres, providing a "molecular signal" in stimulating the differentiation of macrophages to M2 type. It is confirmed that IL-4/Ls/PLLA microspheres could induce M2-macrophages polarization and potentiate osteoblast proliferation and differentiation while coculturing with macrophages and osteoblasts in vitro. Besides, IL-4/Ls/PLLA microspheres are proved to promote bone defect regeneration by inducing the conversion of M1 macrophages to M2 through dual biosignal-functional regulation in both the calvaria defect and maxillary sinus defect models. Overall, the immuno-reprogrammed IL-4/Ls/PLLA microspheres achieve the precise immuno-reprogramming of macrophages by dual biosignal-functional regulation. This immune reengineering strategy paves a way for clinical bone defect treatment.

Bilayered laponite/alginate-poly(acrylamide) composite hydrogel for osteochondral injuries enhances macrophage polarization: An in vivo study

Addressing osteochondral defects, the objective of current study was to synthesize bilayered hydrogel, where the cartilage layer was formed by alginate (Alg)-polyacrylamide (PAAm) with and without the addition of TGF-β3 and bone layer by laponite XLS/Alg-PAAm and characterize by in vitro and in vivo experiments. Exceeding the mechanical strength of Alg-PAAm (32.95 ± 1.23 kPa) and XLS based (317.5 ± 21.72 kPa) hydrogels, XLS/Alg-PAAm hydrogel (469.7 ± 6.1 kPa) activated macrophages towards M2 phenotype and stimulated the expression of anti-inflammatory factors. The addition of TGF-β3 accelerated transition of macrophage polarization, especially between day 4 and 7. The expression levels of M1-related genes such as CD80, iNOS and TNF-α decreased gradually after day 4, reaching lowest values at day 13, whereas the expression levels of M2-related genes, CD206, Arg1 and STAT6 significantly increased promoting M2 macrophage polarization, which might be associated with accelerated bone repair. Moreover, bilayer structure exhibited a better cell viability as well as repairment thorough the XLS contents. In vivo histological examinations verified the significant surface regularity and hyaline like tissue formation employment, along with synchronized degradation profile of the hydrogel with tissue healing at the end of 12 weeks. A mechanically durable, biocompatible and immunocompatible hydrogel was formulated to be utilized in bone-cartilage engineering applications.

AdipoRon Accelerates Bone Repair of Calvarial Defect in Diet-Induced Obesity Mice

AdipoRon Accelerates Bone Repair of Calvarial Defect in Diet-Induced Obesity Mice

Poly-ε-Caprolactone/Fibrin-Alginate Scaffold: A New Pro-Angiogenic Composite Biomaterial for the Treatment of Bone Defects.

We hypothesized that a composite of 3D porous melt-electrowritten poly-ɛ-caprolactone (PCL) coated throughout with a porous and slowly biodegradable fibrin/alginate (FA) matrix would accelerate bone repair due to its angiogenic potential. Scanning electron microscopy showed that the open pore structure of the FA matrix was maintained in the PCL/FA composites. Fourier transform infrared spectroscopy and differential scanning calorimetry showed complete coverage of the PCL fibres by FA, and the PCL/FA crystallinity was decreased compared with PCL. In vitro cell work with osteoprogenitor cells showed that they preferentially bound to the FA component and proliferated on all scaffolds over 28 days. A chorioallantoic membrane assay showed more blood vessel infiltration into FA and PCL/FA compared with PCL, and a significantly higher number of bifurcation points for PCL/FA compared with both FA and PCL. Implantation into a rat cranial defect model followed by microcomputed tomography, histology, and immunohistochemistry after 4- and 12-weeks post operation showed fast early bone formation at week 4, with significantly higher bone formation for FA and PCL/FA compared with PCL. However, this phenomenon was not extrapolated to week 12. Therefore, for long-term bone regeneration, tuning of FA degradation to ensure syncing with new bone formation is likely necessary.

Assessment of nano-hydroxyapatite and poly (lactide-co-glycolide) nanocomposite microspheres fabricated by novel airflow shearing technique for in vivo bone repair

A novel airflow shearing method was introduced to prepare microspheres efficiently with precisely control of microsphere size and homogeneity. The effects of technical parameters in the formation of the microspheres, such as solution concentration, nozzle size and airflow strength, were investigated. By optimizing the technical parameters (8% PLGA concentration, 27–32 G nozzle size, 6–8 l/min airflow strength), nano-hydroxyapatite and poly(lactide-co-glycolide) nanocomposite (nHA/PLGA) microspheres with a diameter around 250 μm and up to 40 wt% nHA content was prepared successfully. Especially, the microspheres possessed revealed great homogeneity and unique “acorn” appearance with two sides: A hard smooth side as well as a crumpled rough side, generated in the preparation process. Furthermore, the nHA/PLGA microspheres' potential application in bone tissue engineering was studied. In vitro, enhanced proliferation and osteogenic differentiation of the MC3T3-E1 cells was observed on as-prepared nHA/PLGA microspheres with high nHA content. In vivo, the BV/TV value of the microspheres with 20 wt% nHA was up to 75% and similar to the clinical products' performance. Moreover, beside high nHA content, the rough porous surface leads to bone ingrowth, which plays an important role in accelerating bone repair. Therefore, airflow shearing method could be an effective approach to fabricate biocompatible microsphere, and the as-prepared microspheres showed unique surface state and bone repair ability and making them as potential candidates for bone tissue engineering and bone implantation clinical applications.

Therapeutic Study of Thermosensitive Hydrogel Loaded with Super-Activated Platelet Lysate Combined with Core Decompression Technology for the Treatment of Femoral Head Necrosis.

Super activated platelet lysate (sPL) is a derivative of platelet-rich plasma (PRP) that contains high levels of several growth factors. In this study, we synthesized a temperature-sensitive hydrogel that contained temperature-sensitive Poly(DL-lactide-glycolide-glycolide acid) (PLGA), SrCl2, and HA, and loaded it with different concentrations of sPL. The hydrogel showed satisfactory encapsulation efficiency and release of the growth factors in a sustained manner, indicating its suitability as a drug carrier. The sPL-loaded hydrogel was inserted into the necrotic femoral head of a rat model and core decompression was applied and resulted in significantly accelerated bone repair and regeneration. Therefore, encapsulation of sPL in a hydrogel scaffolding may be an effective strategy for treating femoral head necrosis.

Plant-derived soybean peroxidase stimulates osteoblast collagen biosynthesis, matrix mineralization, and accelerates bone regeneration in a sheep model

Bone defects arising from fractures or disease represent a significant problem for surgeons to manage and are a substantial economic burden on the healthcare economy. Recent advances in the development of biomaterial substitutes provides an attractive alternative to the current “gold standard” autologous bone grafting. Despite on-going research, we are yet to identify cost effective biocompatible, osteo-inductive factors that stimulate controlled, accelerated bone regeneration.We have recently reported that enzymes with peroxidase activity possess previously unrecognised roles in extracellular matrix biosynthesis, angiogenesis and osteoclastogenesis, which are essential processes in bone remodelling and repair. Here, we report for the first time, that plant-derived soybean peroxidase (SBP) possesses pro-osteogenic ability by promoting collagen I biosynthesis and matrix mineralization of human osteoblasts in vitro. Mechanistically, SBP regulates osteogenic genes responsible for inflammation, extracellular matrix remodelling and ossification, which are necessary for normal bone healing. Furthermore, SBP was shown to have osteo-inductive properties, that when combined with commercially available biphasic calcium phosphate (BCP) granules can accelerate bone repair in a critical size long bone defect ovine model. Micro-CT analysis showed that SBP when combined with commercially available biphasic calcium phosphate (BCP) granules significantly increased bone formation within the defects as early as 4 weeks compared to BCP alone. Histomorphometric assessment demonstrated accelerated bone formation prominent at the defect margins and surrounding individual BCP granules, with evidence of intramembranous ossification. These results highlight the capacity of SBP to be an effective regulator of osteoblastic function and may be beneficial as a new and cost effective osteo-inductive agent to accelerate repair of large bone defects.

Chitin-hydroxyapatite-collagen composite scaffolds for bone regeneration

Bone defect is usually difficult to recover quickly, and bone scaffold transplantation is considered to be an effective method. Biomaterials have a wide range of application prospects in bone tissue repair, and the two key problems are the selection of materials and cells. The object of this study was to discuss the structural characteristics of bone scaffold materials and their effects on bone repair in vivo. The chitin-hydroxyapatite (HAP)-collagen composite scaffolds (CHCS) was prepared with epichlorohydrin (ECH) as crosslinking agent. The structure was characterized and the compressive strength, porosity, water absorbency and stability were investigated. The biocompatibility and osteogenic differentiation of CHCS in vitro were detected, and the effect of defect repair in vivo was evaluated. The results suggested that HAP not only enhanced the compressive strength of CHCS, but also promoted the formation of calcium nodules due to its bone conductivity. Histological staining showed that collagen promoted collagen deposition and new bone formation. X-ray images also indicated that CHCS transplantation accelerated bone repair. Therefore, CHCs has immense potential in bone regeneration.

Transforming Growth Factor-β3/Recombinant Human-like Collagen/Chitosan Freeze-Dried Sponge Primed With Human Periodontal Ligament Stem Cells Promotes Bone Regeneration in Calvarial Defect Rats.

Patients with a skull defect are at risk of developing cerebrospinal fluid leakage and ascending bacterial meningitis at >10% per year. However, treatment with stem cells has brought great hope to large-area cranial defects. Having found that transforming growth factor (TGF)-β3 can promote the osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs), we designed a hybrid TGF-β3/recombinant human-like collagen recombinant human collagen/chitosan (CS) freeze-dried sponge (TRFS) loading hPDLSCs (TRFS-h) to repair skull defects in rats. CFS with 2% CS was selected based on the swelling degree, water absorption, and moisture retention. The CS freeze-dried sponge (CFS) formed a porous three-dimensional structure, as observed by scanning electron microscopy. In addition, cytotoxicity experiments and calcein-AM/PI staining showed that TRFS had a good cellular compatibility and could be degraded completely at 90 days in the implantation site. Furthermore, bone healing was evaluated using micro-computed tomography in rat skull defect models. The bone volume and bone volume fraction were higher in TRFS loaded with hPDLSCs (TRFS-h) group than in the controls (p < 0.01, vs. CFS or TRFS alone). The immunohistochemical results indicated that the expression of Runx2, BMP-2, and collagen-1 (COL Ⅰ) in cells surrounding bone defects in the experimental group was higher than those in the other groups (p < 0.01, vs. CFS or TRFS alone). Taken together, hPDLSCs could proliferate and undergo osteogenic differentiation in TRFS (p < 0.05), and TRFS-h accelerated bone repair in calvarial defect rats. Our research revealed that hPDLSCs could function as seeded cells for skull injury, and their osteogenic differentiation could be accelerated by TGF-β3. This represents an effective therapeutic strategy for restoring traumatic defects of the skull.

Implantable blood clot loaded with BMP-2 for regulation of osteoimmunology and enhancement of bone repair

The treatment of large-area bone defects still faces many difficulties and challenges. Here, we developed a blood clot delivery platform loaded with BMP-2 protein (BMP-2@BC) for enhanced bone regeneration. Blood clot gel platform as natural biomaterials can be engineered from autologous blood. Once implanted into the large bone defect site, it can be used for BMP-2 local delivery, as well as modulating osteoimmunology by recruiting a great number of macrophages and regulating their polarization at different stages. Moreover, due to the deep-red color of blood clot gel, mild localized hyperthermia under laser irradiation further accelerated bone repair and regeneration. We find that the immune niche within the bone defect microenvironment can be modulated in a controllable manner by the blood clots implantation and laser treatment. We further demonstrate that the newly formed bone covered almost 95% of the skull defect area by our strategy in both mice and rat disease models. Due to the great biocompatibility, photothermal potential, and osteoimmunomodulation capacity, such technology shows great promise to be used in further clinical translation.

Umbilical Mesenchymal Stem Cell-Derived Exosome-Encapsulated Hydrogels Accelerate Bone Repair by Enhancing Angiogenesis.

Repair of large bone defects represents a major challenge for orthopedic surgeons. The newly formed microvessels inside grafts play a crucial role in successful bone tissue engineering. Previously, an active role for mesenchymal stem cell (MSC)-derived exosomes in blood vessel development and progression was suggested in the repair of multiple tissues. However, the reports on the application of MSC-derived exosomes in the repair of large bone defects are sparse. In this study, we encapsulated umbilical MSC-derived exosomes (uMSCEXOs) in hyaluronic acid hydrogel (HA-Gel) and combined them with customized nanohydroxyapatite/poly-ε-caprolactone (nHP) scaffolds to repair cranial defects in rats. Imaging and histological evaluation indicated that the uMSCEXOs/Gel/nHP composites markedly enhanced bone regeneration in vivo, and the uMSCEXOs might play a key role in this process. Moreover, the in vitro results demonstrated that uMSCEXOs promoted the proliferation, migration, and angiogenic differentiation of endothelial progenitor cells (EPCs) but did not significantly affect the osteogenic differentiation of BMSCs. Importantly, mechanistic studies revealed that exosomal miR-21 was the potential intercellular messenger that promoted angiogenesis by upregulating the NOTCH1/DLL4 pathway. In conclusion, our findings exhibit a promising exosome-based strategy in repairing large bone defects through enhanced angiogenesis, which potentially regulated by the miR-21/NOTCH1/DLL4 signaling axis.

Berberine-releasing electrospun scaffold induces osteogenic differentiation of DPSCs and accelerates bone repair

The repair of skeletal defects in maxillofacial region remains an intractable problem, the rising technology of bone tissue engineering provides a new strategy to solve it. Scaffolds, a crucial element of tissue engineering, must have favorable biocompatibility as well as osteoinductivity. In this study, we prepared berberine/polycaprolactone/collagen (BBR/PCL/COL) scaffolds with different concentrations of berberine (BBR) (25, 50, 75 and 100 μg/mL) through electrospinning. The influence of dosage on scaffold morphology, cell behavior and in vivo bone defect repair were systematically studied. The results indicated that scaffolds could release BBR stably for up to 27 days. Experiments in vitro showed that BBR/PCL/COL scaffolds had appropriate biocompatibility in the concentration of 25–75 μg/mL, and 50 and 75 μg/mL scaffolds could significantly promote osteogenic differentiation of dental pulp stem cells. Scaffold with 50 μg/mL BBR was implanted into the critical bone defect of rats to evaluate the ability of bone repair in vivo. It was found that BBR/PCL/COL scaffold performed more favorable than polycaprolactone/collagen (PCL/COL) scaffold. Overall, our study is the first to evaluate the capability of in vivo bone repair of BBR/PCL/COL electrospun scaffold. The results indicate that BBR/PCL/COL scaffold has prospective potential for tissue engineering applications in bone regeneration therapy.