Absorption Of Chemicals Research Articles

A Mathematical Approach Using Strat-M® to Predict the Percutaneous Absorption of Chemicals under Finite Dose Conditions.

Estimation of the percutaneous absorption is essential for the safety assessment of cosmetic and dermopharmaceutical products. Currently, an artificial membrane, Strat-M®, has been focused on as the tool which could obtain the permeation parameters close to the skin-derived values. Nevertheless, few practical methodologies using the permeation parameters for assessing percutaneous absorption under in-use conditions are available. In the present study, based on Fick’s first law of diffusion, a novel mathematical model incorporating the permeation parameters as well as considering the water evaporation (Teva) was constructed. Then, to evaluate the applicability domain of our model in the case where Strat-M®-derived parameters were used, the permeation parameters were compared between the skin from edible porcine and Strat-M®. Regarding chemicals (−0.2 ≤ Log Kow ≤ 2.0), their permeation profiles were equivalent between Strat-M® and porcine skin. Therefore, for these chemicals, the percutaneous absorption was calculated using our model with the permeation parameters obtained using Strat-M® and the Teva determined by measuring the solution weight. The calculated values revealed a good correlation to the values obtained using porcine skin in finite dose experiments, suggesting that our mathematical approach with Strat-M® would be useful for the future safety assessment of cosmetic and dermopharmaceutical products.

Use of Chicken Embryo Model in Toxicity Studies of Endocrine-Disrupting Chemicals and Nanoparticles.

Lab animals such as mice and rats are widely used in toxicity research of food additive and pharmaceutics, despite the well-recognized research limitation such as the inability to simulate human neurological diseases, faster absorption of chemicals, big variations among species, and high cost when using a large number of animals. The Society of Toxicology's guidance now focuses on minimizing discomfort and distress of lab animals, finding alternative ways to reduce animal number, replacing animals with in vitro models, and complying to the animal welfare policies. The chicken embryonic model can be a better alternative to mice and rats because of its abundant availability and cost-effectiveness. It can be studied in both laboratory and natural environment, with easy manipulation in ovo or in vivo. The objective of this review paper is to evaluate the use of chicken embryonic model in toxicity evaluation for endocrine-disrupting chemicals (EDCs) and nanoparticles (NPs) by different end points to determine more comprehensive toxic responses. The end points include chicken embryonic mortality and hatchability, developmental malformation analysis, hormonal imbalance, physiological changes in endocrine organs, and antiangiogenesis. Major research methodologies using chicken embryos are also summarized to demonstrate their versatile practice and valuable application in modern toxicity evaluation of EDCs and NPs.

A new type of multistage structure hydrotalcite material: To promote the absorption of chemicals in wet leather processing

A novel ZnZr‐MOF‐LDH was designed and synthesized with Zr‐MOF as template, and subsequently, it was applied to leather tanning. Zr‐MOF and ZnZr‐MOF‐LDH were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS), and nitrogen adsorption instrument. The results of SEM and TEM shown that when the mass ratio of Zr‐MOF to zinc nitrate was 1:2, the size of ZnZr‐MOF‐LDH was about 100 nm with surface has obvious convex polyhedral multilevel structure. The FT‐IR and XPS results showed that the ZnZr‐MOF‐LDH with good crystal structure was prepared. The Brunauer–Emmett–Teller (BET) results showed that the specific surface area and pore volume of ZnZr‐MOF‐LDH were higher than those of ZnZr‐LDH. The application results shown that compared with 2% chrome tanning agent tanning, the shrinkage temperature of leather treated by ZnZr‐MOF‐LDH combined with 2% chrome tanning agent tanning was increased from 73.1°C to 92.1°C and the thickening rate was increased from 38.71% to 56.98%. The subsequent wet processing was carried out which showed that adding ZnZr‐MOF‐LDH considered to be a good way to enhance the absorption rate of dyestuff and fatliquor, resulting in an ecological process and more economical. The absorption of chemicals during wet processing of leather improves the properties of green leather and reduces environmental pollution.

Estimation of skin absorption of chemicals with Fick's diffusion model

The skin is not only the site of drug application, but also the site of exposure to various chemical substances. Prediction of skin permeability, body absorption, and local skin concentration of chemicals are very important to assure efficacy and safety. Most in silico models for skin permeation of chemical are based on the prediction of its permeability coefficient (P, unit cm/s), and a certain level of prediction accuracy has been obtained. On the other hand, the amount absorbed in the body of a chemical is calculated from the sum of the amount of skin permeation and the amount under the stratum corneum (viable epidermis and dermis). The amount of skin permeation can be calculated from the P value as mentioned above, however, the amount under the stratum corneum, which is related to the local skin safety of the chemical, cannot be predicted. This article describes the principles of permeation of chemicals across the skin, the relationship between skin permeability and concentration in the skin, and the method for calculating the chemical concentration under the stratum corneum using skin permeation parameters.

A Novel Personal Passive Sampler for Collecting Gaseous Phthalates.

Dermal absorption of gaseous chemicals is an important contributor to increased health risk and has yet to be adequately addressed due to the lack of available sampling techniques. In the present study, a novel personal passive sampler consisting of a housing (embracing a polydimethylsiloxane (PDMS) disk as the sorbent phase, a membrane filter, and a stainless-steel mesh) and a watchband (traditional wristband) was constructed and used to characterize gaseous phthalates (PAEs) near the air-skin interface. In a real-life setting, the utility of the passive sampler was validated by comparing the composition profiles of PAEs in the PDMS disks and in active samples and watchbands. The compositions of PAEs were consistent in disks and gaseous constituents from ambient air, with low-molecular-weight (<306 g mol-1) PAEs accounting for 87-100% and approximately 100%, respectively. Appreciable amounts of diisononyl phthalate, diisodecyl phthalate, dinonyl phthalate, and skin lipid (e.g., squalene) were detected in watchbands but not in disks. Apparently, the passive sampler can prevent particles and skin-related chemicals from adhering to the disk and collect gaseous PAEs only. The vast majority of PAEs in watchbands was associated with nongaseous constituents. The present study demonstrated that the sampling strategy is a key factor in exposure assessment.

A Review: Sustainable Material Selection for Children’s Wear

In this mini-review article, the health and safety concerns of textiles used for children’s wear were discussed including topics such as the adverse impacts of inappropriate clothing materials, fabric dyestuffs, and common textile wet processing. In the selection of fiber materials to use in children’s wear, usually it is best to use natural fibers to best prevent skin irritation or potential damage to children’s bodies through the dermal absorption of toxic chemicals. Rather than synthetic fibers, there are a few safer alternatives such as organic cotton, hemp, or lyocell fibers. Fabrics selected for children’s wear should be lightweight, breathable, soft, and gentle on the skin, and have some stretch to accommodate the children’s growth and playing activities. Moreover, applying natural and low-impact dyes to children’s clothing would be a sustainable practice to minimize the adverse impacts caused by conventional textile dyeing throughout the product life cycle of a garment.

Impact of heat on biological concentrations of toluene and acetone resulting from exposure by inhalation: A pilot study

Climatic conditions raise new concerns about the potential impact of heat on the absorption and kinetics of certain chemicals. The impact of 3 temperatures (21, 25 and 30 °C WBGT) on the toxicokinetics of toluene and acetone was therefore evaluated in five human subjects during controlled exposures in an inhalation chamber. Biological samples were collected and analyzed by GC–MS/MS. Increases between 4 and 85 % were observed for solvents concentrations in blood (30 vs 21 °C) while decreases in urine samples for acetone and o-cresol were measured at the end of the exposure period (4 h). Mean blood concentrations at 4 h are well correlated with temperature. Results suggest an increased absorption and/or a decreased elimination of volatile chemicals in the presence of heat. Higher increases of blood chemical concentrations were observed in heavier individuals. Further studies should include physiologically based toxicokinetic models to help in better understanding the mechanisms involved and their respective contribution.

Measurement of polychlorinated biphenyls with hand wipes and matched serum collected from Chinese E-waste dismantling workers: Exposure estimates and implications

To date, dermal/hand-to-mouth exposure to chemicals in the e-waste recycling environment has not been sufficiently understood, and the importance of dermal absorption of chemicals in e-waste dismantling workers remains controversial. In this study, we utilized hand wipes and matched sera to characterize dermal/hand-to-mouth exposure to PCBs for e-waste dismantling workers, and potential effects on thyroid hormones were also assessed. PCB loadings in hand wipes varied from 0.829–265 ng wipe−1 (11.3–2850 ng m−2 wipe−1), with 37.2 ng wipe−1 (432 ng m−2 wipe−1) as the median value. Serum concentrations of PCBs ranged from 32.3–3410 ng g−1 lipid weight (lw) with 364 ng g−1 lw as the median value. Between wipes and sera, lower-chlorinated congeners (e.g. CB-28, -66, -74, -99,-105 and -118) showed significant associations (p < 0.01), but higher-chlorinated congeners (e.g. CB-138, -153, -156, -170, and -180) did not. These lower-chlorinated CBs were the major contributors to estimated dermal/hand-to-mouth average daily doses (ADDs) and the hazard index (HI). Correspondingly, their estimated contributions to serum levels by dermal absorption were also significant, with the contribution of CB-28 being as high as 21.4%. As a consequence, dermal absorption of some low-chlorinated congeners was a non-negligible route for e-waste dismantling workers. Although insignificant association was shown between serum PCBs and thyroid hormones, the potential health risk should be of concern due to the high levels of PCBs observed in workers' sera.

Cross-Hemisphere Study Reveals Geographically Ubiquitous, Plastic-Specific Bacteria Emerging from the Rare and Unexplored Biosphere.

ABSTRACTWhile it is now appreciated that the millions of tons of plastic pollution travelling through marine systems carry complex communities of microorganisms, it is still unknown to what extent these biofilm communities are specific to the plastic or selected by the surrounding ecosystem. To address this, we characterized and compared the microbial communities of microplastic particles, nonplastic (natural and wax) particles, and the surrounding waters from three marine ecosystems (the Baltic, Sargasso and Mediterranean seas) using high-throughput 16S rRNA gene sequencing. We found that biofilm communities on microplastic and nonplastic particles were highly similar to one another across this broad geographical range. The similar temperature and salinity profiles of the Sargasso and Mediterranean seas, compared to the Baltic Sea, were reflected in the biofilm communities. We identified plastic-specific operational taxonomic units (OTUs) that were not detected on nonplastic particles or in the surrounding waters. Twenty-six of the plastic-specific OTUs were geographically ubiquitous across all sampled locations. These geographically ubiquitous plastic-specific OTUs were mostly low-abundance members of their biofilm communities and often represented uncultured members of marine ecosystems. These results demonstrate the potential for plastics to be a reservoir of rare and understudied microbes, thus warranting further investigations into the dynamics and role of these microbes in marine ecosystems.IMPORTANCE This study represents one of the largest comparisons of biofilms from environmentally sampled plastic and nonplastic particles from aquatic environments. By including particles sampled through three separate campaigns in the Baltic, Sargasso, and Mediterranean seas, we were able to make cross-geographical comparisons and discovered common taxonomical signatures that define the plastic biofilm. For the first time, we identified plastic-specific bacteria that reoccur across marine regions. Our data reveal that plastics have selective properties that repeatedly enrich for similar bacteria regardless of location, potentially shifting aquatic microbial communities in areas with high levels of plastic pollution. Furthermore, we show that bacterial communities on plastic do not appear to be strongly influenced by polymer type, suggesting that other properties, such as the absorption and/or leaching of chemicals from the surface, are likely to be more important in the selection and enrichment of specific microorganisms.

Effect of Application Amounts on In Vitro Dermal Absorption Test Using Caffeine and Testosterone.

Dermal absorption of chemicals is a key factor in risk assessment. This study investigated the effects of different amounts of application on dermal absorption and suggested an appropriate application dose for proper dermal absorption. Caffeine and testosterone were chosen as test compounds. An in vitro dermal absorption test was performed using a Franz diffusion cell. Different amounts (5, 10, 25, and 50 mg (or µL)/cm2) of semisolid (cream) and liquid (solution) formulations containing 1% caffeine and 0.1% testosterone were applied to rat and minipig (Micropig®) skins. After 24 h, the concentrations of both compounds remaining on the skin surface and in the stratum corneum, dermis and epidermis, and receptor fluid were determined using LC-MS / MS or HPLC. Dermal absorption of both compounds decreased with increasing amounts of application in both skin types (rat and minipig) and formulations (cream and solution). Especially, dermal absorptions (%) of both compounds at 50 mg (or µL)/cm2 was significantly lower compared to 5 or 10 mg (or µL)/cm2 in both rat and minipig skins. Therefore, a low dose (5 or 10 mg (or µL)/cm2) of the formulation should be applied to obtain conservative dermal absorption.

Uptake of Chemicals through the Skin: An Important Role of Filaggrin Gene Variants.

Uptake of Chemicals through the Skin: An Important Role of Filaggrin Gene Variants.

Filaggrin Polymorphisms and the Uptake of Chemicals through the Skin-A Human Experimental Study.

Background:The filaggrin protein is important for skin barrier structure and function. Loss-of-function (null) mutations in the filaggrin gene FLG may increase dermal absorption of chemicals.Objective:The objective of the study was to clarify if dermal absorption of chemicals differs depending on FLG genotype.Method:We performed a quantitative real-time polymerase chain reaction (qPCR)-based genetic screen for loss-of-function mutations (FLG null) in 432 volunteers from the general population in southern Sweden and identified 28 FLG null carriers. In a dermal exposure experiment, we exposed 23 FLG null and 31 wild-type (wt) carriers to three organic compounds common in the environment: the polycyclic aromatic hydrocarbon pyrene, the pesticide pyrimethanil, and the ultraviolet-light absorber oxybenzone. We then used liquid-chromatography mass-spectrometry to measure the concentrations of these chemicals or their metabolites in the subjects’ urine over 48 h following exposure. Furthermore, we used long-range PCR to measure FLG repeat copy number variants (CNV), and we performed population toxicokinetic analysis.Results:Lag times for the uptake and dermal absorption rate of the chemicals differed significantly between FLG null and wt carriers with low (20–22 repeats) and high FLG CNV (23–24 repeats). We found a dose-dependent effect on chemical absorption with increasing lag times by increasing CNV for both pyrimethanil and pyrene, and decreasing area under the urinary excretion rate curve () with increasing CNV for pyrimethanil. FLG null carriers excreted 18% and 110% more metabolite (estimated by ) for pyrimethanil than wt carriers with low and high CNV, respectively.Conclusion:We conclude that FLG genotype influences the dermal absorption of some common chemicals. Overall, FLG null carriers were the most susceptible, with the shortest lag time and highest rate constants for skin absorption, and higher fractions of the applied dose excreted. Furthermore, our results indicate that low FLG CNV resulted in increased dermal absorption of chemicals. https://doi.org/10.1289/EHP7310

Percutaneous absorption of chemicals from fabric (textile)

Percutaneous penetration of chemicals from clothing can result in both acute and chronic toxicities. Although personal protective equipment composed of nonwoven material can provide thorough protection, it is often uncomfortable under normal occupational conditions. Certain everyday textiles are often utilized as protective clothing due to their cost, comfort, and convenience. Although common textiles may cover most skin, certain regions remain exposed by such outfits. The body areas covered by the fabric are at risk for fabric permeation and percutaneous penetration of chemical, either immediately or over time, dependent on the fabric composition and the characteristics of the chemical used. in vitro and in vivo publications studied percutaneous penetration of chemicals from contaminated fabric and show that everyday textiles are superior to bare skin. The increased protection offered can be attributed to properties of the fabric such as weave, thickness, fabric finish, absorbency, and the overall barrier provided. Although common textiles do offer some protection, they remain inferior to nonwoven personal protective equipment. Much remains unknown regarding percutaneous penetration and protection offered by everyday textiles.

Cholinesterase Inhibition and Exposure to Organophosphate Esters in Aircraft Maintenance Workers.

INTRODUCTION: Aircraft maintenance workers may be exposed to organophosphates in hydraulic fluid and engine oil. Previous research has indicated that inhalation may not be the primary exposure route. This study sought to measure dermal contact and inhalation in conjunction with cholinesterase inhibition and determine if Air Force Specialty Code serves as an exposure predictor.METHODS: Aircraft maintenance workers were sampled for changes in acetylcholinesterase and butyrylcholinesterase. Dermal contact was measured using wrist-worn silicone passive dosimeters and inhalation exposure was measured using thermal desorption tube air sampling.RESULTS: Overall prevalence of any cholinesterase inhibition in the study population was 25.33%. Prevalence of inhibition of acetylcholinesterase and butyrylcholinesterase was 18.67% and 6.67%, respectively. The mean tributyl phosphate result was 1.71 ng of tributyl phosphate per gram of wristband (ng g1) [95% confidence interval (CI): 5.63, 9.05]. Triphenyl phosphate was more prevalent, with only one sample below the limit of detection (mean 1386.26 ng g1; 95% CI: 7297.78, 10,070.31), and tricresyl phosphate was found in every sample (mean 4311.65 ng g1; 95% CI: 8890.24, 17,512.31). No organophosphates were detected via air sampling.DISCUSSION: Workers experienced organophosphate exposure and cholinesterase inhibition, but the study was not large enough to establish a statistically significant association between exposure and disease. Exposure to organophosphate esters is more likely to occur through contact and absorption of chemicals through the skin than through inhalation of oil mists. Air Force Specialty Code does not appear to be a good predictor of exposure to organophosphates. Future studies should consider using a larger sample size.Hardos JE, Rubenstein M, Pfahler S, Sleight T. Cholinesterase inhibition and exposure to organophosphate esters in aircraft maintenance workers. Aerosp Med Hum Perform. 2020; 91(9):710714.

Can models of percutaneous absorption based on in vitro data in frogs predict in vivo absorption?

The primary aim of in vitro testing of chemicals delivered via the percutaneous route is to predict the absorption that would ensue if exposure occurred in live animals. While there is mounting evidence that in vitro diffusion studies in mammalian skin can provide valid information regarding likely in vivo absorption, little is known whether such a correlation exists between in vitro diffusion testing and in vivo blood levels in amphibians. The current study used previously-reported in vitro absorption data for caffeine, benzoic acid, and ibuprofen across isolated skin from the cane toad (Rhinella marina) to produce a series of linear mixed-effect models of the absorption parameters flux and permeability coefficient (Kp). Models investigated the relative impacts of animal weight, physicochemical characteristics of the applied chemical (logP or molecular weight), and site of application. The top models were then used to predict the flux, Kp and serum concentrations of the same three model chemicals. Finally, the absorption of these chemicals was determined in live cane toads, and results compared to the model predictions. LogP and site of application were included in all top models. In vivo absorption rates were lower than predicted for all chemicals, however, the models provided reasonable predictions of serum concentration, with factors of difference (FOD) ranging from 2.5–10.5. Ibuprofen, the chemical with the highest relative lipophilicity, had the poorest predictive performance, consistently having the highest FOD for all predictions. This report presents the first models of percutaneous absorption in an amphibian. These models provide a basic method to establish the approximate in vivo absorption of hydrophilic and moderately-lipophilic chemicals through frog skin, and could therefore be used to predict absorption when formulating such chemicals for treatment of disease in frogs, or for risk-assessments regarding chemical pollutants in frog habitats.

Micromechanical Switch-Based Zero-Power Chemical Detectors for Plant Health Monitoring

In this paper, for the first time we demonstrate zero-power volatile-organic-chemical (VOC) detectors based on micromechanical switches suitable for plant health monitoring. Differently from state-of-the-art active chemical sensors, the device presented here exploits a completely passive, chemically-sensitive switch based on a bimaterial micro-cantilever and a passive switch-based readout mechanism to detect VOCs exceeding a pre-determined concentration released by unhealthy plants. When exposed to target VOCs, the polymer/metal bimaterial beam bends downward and trigger the switch due to the stress induced from the absorption of chemicals in the polymer layer. Here we show experimental demonstrations of detecting toluene, hexenol (cis-3-Hexen-1-ol, a chemical released from plants under attack by pests) and ethanol, respectively, with our fabricated prototypes. The demonstrated high sensitivity to ethanol (~8 nm/ppm ) and hexenol (~3.3 nm/ppm ) was achieved by the optimization of device geometries showing a great promise of the proposed technology to ultimately achieve 10s ppm detection limit (with a sub-micron contact gap and voltage bias) which is required for the device operation in close proximity to a plant in an open environment. [2020-0190]

SYNTHESIS AND STUDY OF ANTIBACTERIAL ACTIVITY OF LICITHIN ORGANOGEL WITH (OA) UNDER INVITRO CONDITIONS

The preparation based on lecithin, (OA), and essential oil (LOO), which has the property to accelerate the process of absorption through skin tissues, is synthesized based on oleic acid (OA) and biologically active substance lecithin (phospholipid concentrate), refers to cosmetology and medicine. The gel is used as a base for cosmetic or medical products of external applications. Gel resistance allows the solubilization process to contain a biologically active substance. Synthesized preparation based on (OA) and biologically active substance lecithin (phospholipid concentrate) accelerate the absorption of various chemicals for the skin. Microbiological studies were carried out to determine the sensitivity of the (OA) composite preparation of 10 microbial species to the impact of 10 microbial species under in-vitro conditions. The structure of synthesized development is confirmed by methods of UV-spectrum high-performance energy-dispersion X-ray fluorescence spectrometer. It has been found that the penetration of the gel into the composition is significantly higher than that of the aqueous solution at the absorption rate.

Antibiotic Delivery Strategies to Treat Skin Infections When Innate Antimicrobial Defense Fails.

The epidermal skin barrier protects the body from a host of daily challenges, providing protection against mechanical insults and the absorption of chemicals and xenobiotics. In addition to the physical barrier, the epidermis also presents an innate defense against microbial overgrowth. This is achieved through the presence of a diverse collection of microorganisms on the skin (the “microbiota”) that maintain a delicate balance with the host and play a significant role in overall human health. When the skin is wounded, the local tissue with a compromised barrier can become colonized and ultimately infected if bacterial growth overcomes the host response. Wound infections present an immense burden in healthcare costs and decreased quality of life for patients, and treatment becomes increasingly important because of the negative impact that infection has on slowing the rate of wound healing. In this review, we discuss specific challenges of treating wound infections and the advances in drug delivery platforms and formulations that are under development to improve topical delivery of antimicrobial treatments.

Absorption of chemicals in amorphous trisresorcinarene.

Trisresorcinarene is an interesting class of macrocyclic host. Its insoluble nature and conformationally flexible structure allow its application as a solid absorbent. Various aromatic and aliphatic hydrocarbons are absorbed into the amorphous solid of the trisresorcinarene, demonstrating the versatile absorption capability of trisresorcinarene.

Preparing Xanthan‐Chitosan Composites in Glycerol

AbstractAnionic xanthan (X) and cationic chitosan (C) form xanthan‐chitosan (X+C) complexes by electrostatic attraction in an aquatic environment where concentration of either of the polysaccharides does not exceed 2.5 wt %. Covalently bonded xanthan‐chitosan (X−C) composites were prepared in dry glycerol with concentration of either of the polysaccharides in the range 0.025 to 50% weight. In dry glycerol xanthan and chitosan formed covalent bonds via condensation reactions. Carboxyl groups donate OH− while amino groups donate H+ to make H2O; water is also condensed in Maillard reactions during crosslinking of both xanthan and chitosan with glycerol. X−C composites were made at xanthan to chitosan ratio in range 0.08 to 26. Porosity of X−C composites decreased with increasing xanthan content and decreasing chitosan content. X−C composites prepared at various xanthan to chitosan ratio showed different H2O absorption, hardness, release and absorption of chemicals, and they differed in other characteristics as well. These results are significant for scientific community, food, material, pharmaceutical, and other fields.