Absorption Materials Research Articles

Demonstration of the carbon capture with building make-up air unit

Building-integrated carbon capture technology has the potential to reduce the cost of CO2 capture while improving indoor air quality (IAQ). To promote the adoption of CO2 capture in a building environment, this study investigated the possibility of integrating carbon capture technology with an existing rooftop make-up air unit (MAU) system to trap CO2. Here, a modular compact CO2 capture system containing amine-functionalized polymer fibers was examined. The system, which was installed at the exhaust of the MAU, captures CO2 before it leaves the building to enter the atmosphere as a greenhouse gas. The demonstrated average amount of CO2 captured was 1.1–1.4 mmol/g of absorbent material. Techno-economic analysis (TEA) was further performed on the CO2 capture system, considering material costs, energy costs, as well as transportation and regeneration costs. These results were then used to estimate the levelized cost per ton CO2 captured (LCOC). To achieve LCOC below $100/t-CO2, adsorbents should have working capacities of 4.9 t and 3 t-CO2/year for 5 years and 10 years of operation, respectively. In summary, this study highlights a viable path toward the decarbonization of the commercial buildings sector and provides quantitative performance and economic insight on the suitability of building-integrated carbon capture technology.

Valorization of Ricinus communis outer shell biomass to biochar: Impact of thermal decomposition temperature on physicochemical properties and EMI shielding performance

The rising awareness of electromagnetic pollution has increased interest in renewable and ecologically sustainable materials for shielding electromagnetic waves. Research on carbon-based electromagnetic wave absorption materials derived from agro waste is widely explored due to their advantageous characteristics, including low density and consistent physicochemical properties. The research aims to produce biochar with maximum carbon content from Ricinus communis outer shell (RCOS) and to examine the characteristics of biochar/epoxy composites for their application in electromagnetic (EM) shielding. In this study, the composite made from RCOS-based biochar was effectively developed using slow pyrolysis at 400 °C–700 °C. The characterisations of enhanced properties of biochar were conducted by using yield analysis and proximate analysis, elemental analysis, field emission scanning electron microscope (FE-SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), electrical conductivity. The biochar pyrolysis results revealed that the biochar yield, fixed carbon and maximum carbon content were 30 wt%, 50.49 wt% and 79.2 wt%, respectively, at 700 °C. Fourier transform infrared (FTIR) spectroscopy revealed that for the biochar at 700 °C, C=C and C-H functional groups were present, and the others were eliminated as volatile gases during biochar production. TG analysis demonstrated higher biochar stability with residues of 75 % for 700 °C. The biochar produced at 700 °C possesses the maximum electrical conductivity of 95 S/m due to the presence of graphitic carbon. The vector network analyser (VNA) measured a maximum shielding efficiency of 26.5 dB in the X-band frequency when adding 40 wt% biochar prepared at 700 °C to the epoxy matrix. The results suggest that the RCOS biochar/epoxy composites have promise as a novel type of absorbent materials because of their low density, lightweight structure, and extensive absorption capacities. These biochar-based lightweight composites can be used as a shielding material for electronic enclosures, telecommunication equipment, and aerospace applications.

Preparation of broad-bandwidth porous carbon electromagnetic wave absorption materials from agricultural waste corncob

Developing advanced electromagnetic wave-absorbing materials tend to focus on the characteristics of low cost, renewability, environmental friendliness, strong absorption, wide bandwidth, and lightweight. This paper described the preparation of porous carbon electromagnetic wave-absorbing materials with strong absorption, broad bandwidth and thin thickness by one-step charring of corncob, an agricultural waste. The corncob porous carbon (CPC) materials were prepared when the charring temperature was 600 °C, the charring time was 3 h and the activator ratio was 0.25:1. The obtained CPC exhibited porous microstructure with average pore size of approximately 1 μm. Its specific surface area was 713.971 m2·g−1, with pore volume of 0.289 mL·g−1 and high degree graphitization. CPC showed excellent electromagnetic wave absorption performance with minimum reflection loss (RL min) of −38.21 dB and effective absorption bandwidth (EAB) of 5.6 GHz at a relatively thin thickness of 2.0 mm. CPC was capable of absorbing 99.9 % of electromagnetic wave (EMW).

Synthesis of Co3O4@C/Ti3C2Tx MXene composites for enhanced electromagnetic wave absorption

Due to the harmful effects of electromagnetic pollution on human bodies and electronic devices, efficient microwave absorbing materials have garnered significant attention. In this paper, highly efficient microwave-absorbing Co3O4@C/Ti3C2Tx composites were synthesized by a combination of hydrothermal and electrostatic self-assembly methods. Benefiting from the synergistic effects of the multiple reflections in the Co3O4@C core-shell structure and the high conductivity coupled with the large surface area of Ti3C2Tx, the composite material, with a mass ratio of 1: 2, exhibits remarkable wave absorption capabilities, achieving a minimum reflection loss (RL) of −35.2 dB at a thickness of 4.5 mm and an effective absorption bandwidth (EAB) of 7.4 GHz within the 2–18 GHz frequency range. It is noteworthy that the smaller the RL value, the higher the material's absorption performance, and the wider the frequency range covered by the EAB, the better the overall absorption effect. Specifically, an RL value below −10 dB corresponds to an absorption rate of 90 %, which further enhances to 99 % for RL values below −20 dB. The outstanding electromagnetic wave absorption performance of the Co3O4@C/Ti3C2Tx composites can be primarily attributed to the synergy between the multiple reflective absorptions offered by the core-shell structure and the exceptional conductivity and high specific surface area inherent in the MXene material. These findings underscore the promising potential of Co3O4@C/Ti3C2Tx composites for electromagnetic absorption applications and offer a novel perspective for the design of MXene-based magnetic absorption materials.

High-performance cobalt-embedded SiC nanofiber fabric for microwave dissipation

The incorporation of magnetic ingredients is critical for ceramic-based microwave absorbers with high efficiency. However, this task is becoming challenging due to the dispersion and oxidation issues. In this study, metal-organic framework (MOF) ZIF-67 was employed as the precursor of magnetic compounds and combined with a polymer solution to fabricate SiC textiles using the electrospinning technique. The microstructure analysis confirmed the successful introduction of MOF particles within the SiC nanofibers. Further examination of chemical compositions and magnetic properties revealed the encapsulation of magnetic compounds in hybrid SiC textiles. Since the applied fabrication approach ensures a superior dispersion and protection of metal compounds in a ceramic matrix, the microwave absorption of SiC fabric with both dielectric loss and magnetic loss exhibits a high reflection loss of -59.4 dB and a wide effective absorption band of 5.70 GHz. The current fabrication strategy for fabricating microwave absorbers with dual loss mechanisms advances the development of ceramic-based microwave absorption materials.

Synthesis of hierarchical carbon Nanofibers-CoNi/C composites for enhanced microwave absorption efficiency

Developing lightweight, highly absorption and broadband microwave absorbents to combat severe electromagnetic radiation pollution poses a significant challenge. In this study, we designed a novel chain-like CNFs-CoNi/C nanocomposite by in-situ growth of bimetallic MOFs on the CNFs followed by calcination. The resulting CoNi/C composite with hollow structure was uniformly distributed along the 1D CNFs. The unique porous structure and heterogeneous interface derived from MOFs facilitated efficient scattering and multiple reflections of microwaves. By harnessing interfacial polarization loss, dipole polarization loss, and conduction loss mechanisms synergistically, the chain-shaped porous multi-stage CNFs-CoNi/C composite exhibited exceptional microwave absorption performance at a filling ratio of 10 %. It achieves a maximum reflection loss of −70 dB and an absorption bandwidth (EAB) for RL ≤ -10 exceeding 4.82 GHz with a corresponding thickness as low as 1.25 mm. This study introduced a lightweight and highly absorptive material that offers valuable insights into developing high-performance electromagnetic wave absorbing materials through organic composite comprising MOF and carbon materials.

DETERMINATION RISK OF BREMSSTRAHLUNG RADIATION PRODUCED BY BETA-RAY

When interacting with absorption materials, beta rays, which are emitted by isotopes, are harmful because bremsstrahlung (braking) radiation is produced. Therefore, the efficiency of a shielding material can be improved by considering the bremsstrahlung radiation generated by the material’s beta ray absorption. In this study, to determine the risk of bremsstrahlung radiation produced by beta rays, the fractions of beta energy transformed into bremsstrahlung radiation were calculated for beta emitters in the energy ranges of 0.0026–0.1734, 0.205–0.694, and 0.9345–2.640 MeV, using five different absorption materials (13Al, 26Fe, 48Cd, 74W, and 82Pb). The relationship between the fractions of beta energy transformed into bremsstrahlung radiation by the five shielding materials and the maximum energies of some beta emitters was studied to determine the most suitable beta-ray shielding materials to effectively minimize bremsstrahlung radiation. The results showed that the fractions of beta energy transformed into bremsstrahlung radiation increased as the beta energy and the atomic number of the shielding material increased. The fraction of beta energy transformed into bremsstrahlung radiation in 13Al ˂ 26Fe ˂ 48Cd ˂ 74W ˂ 82Pb.Therefore, beta ray shields should be made with low atomic number materials to reduce the generation of bremsstrahlung radiation. Practically, beta shields made from materials with atomic numbers greater than 13 are rarely employed; notably, aluminum successfully decreased the production of bremsstrahlung radiation. However, it is also necessary to use materials with medium and high atomic numbers as secondary beta shields to reduce the effect of the bremsstrahlung radiation photons formed by the interaction between beta rays and shielding materials.

Patterned 3D-graphene for self-powered broadband photodetector

The remarkable ultra-wideband energy capabilities of zero-bandgap two-dimensional (2D) graphene have made it an outstanding material for photon absorption and charge carrier generation across a broad spectrum. However, atomically thick 2D-graphene only exhibits a light absorption efficiency of 2.3%, posing a challenge for graphene-based photodetectors to harness photon energy effectively. This study utilized plasma-enhanced chemical vapor deposition technology and a mask to create in situ patterned 3D-graphene/Si-based Schottky heterojunctions. The porous structure and natural nano-resonant cavities of the 3D-graphene enhanced the probability of light absorption, while the curved and sharp edges and corners of the patterned 3D-graphene concentrated the local electromagnetic field and induced localized surface plasmon resonance. Both theoretical and experimental analyses confirmed the improved light absorption mechanisms and charge transfer of photogenerated carriers under the built-in electric field. The photodetector based on the patterned 3D-graphene/Si Schottky structure exhibits excellent broadband response characteristics spanning from 380 to 1550 nm, with responsivity and specific detectivity of 68.47 A/W and 1.43 × 1012 Jones at a wavelength of 1550 nm. Furthermore, the photodetector demonstrated ultrafast microsecond-level response times (116/120 μs rise/fall times) along with exceptional stability and reliability. The potential applications of as-fabricated photodetector include logic devices such as “AND” and “OR” gates and information encryption. This research holds valuable scientific significance for the design of future optoelectronic devices and provides crucial insights and technical support for developing high-performance Si-based graphene detectors.

Accurate Crystal Structure Prediction of New 2D Hybrid Organic-Inorganic Perovskites.

Low-dimensional hybrid organic-inorganic perovskites (HOIPs) are promising electronically active materials for light absorption and emission. The design space of HOIPs is extremely large, as a variety of organic cations can be combined with different inorganic frameworks. This not only allows for tunable electronic and mechanical properties but also necessitates the development of new tools for in silico high throughput analysis of candidate materials. In this work, we present an accurate, efficient, and widely applicable machine learning interatomic potential (MLIP) trained on 86 diverse experimentally reported HOIP materials. This MLIP was tested on 73 experimentally reported perovskite compositions and achieves a high accuracy, relative to density functional theory (DFT). We also introduce a novel random structure search algorithm designed for the crystal structure prediction of 2D HOIPs. The combination of MLIP and the structure search algorithm reliably recovers the crystal structure of 14 known 2D perovskites by specifying only the organic molecule and inorganic cation/halide. Performing this crystal structure search with ab initio methods would be computationally prohibitive but is relatively inexpensive with the MLIP. Finally, the developed procedure is used to predict the structure of a totally new HOIP with cation (cis-1,3-cyclohexanediamine). Subsequently, the new compound was synthesized and characterized, which matches the predicted structure, confirming the accuracy of our method. This capability will enable the efficient and accurate screening of thousands of combinations of organic cations and inorganic layers for further investigation.

Boosting photothermal conversion through array aggregation of metalloporphyrins in bismuth-based coordination frameworks.

Materials capable of efficiently converting near-infrared (NIR) light into heat are highly sought after in biotechnology. In this study, two new three-dimensional (3D) porphyrin-based metal-organic frameworks (MOFs) with a sra-net, viz. CoTCPP-Bi/NiTCPP-Bi, were successfully synthesized. These MOFs feature bismuth carboxylate nodes interconnected by metalloporphyrinic spacers, forming one-dimensional (1D) arrays of closely spaced metalloporphyrins. Notably, the CoTCPP-Bi exhibits an approximate Co⋯C distance of 3 Å, leading to enhanced absorption of NIR light up to 1400 nm due to the presence of strong interlayer van der Waals forces. Furthermore, the spatial arrangement of the metalloporphyrins prevents axial coordination at the centers of porphyrin rings and stabilizes a CoII-based metalloradical. These characteristics promote NIR light absorption and non-radiative decay, thereby improving photothermal conversion efficiency. Consequently, CoTCPP-Bi can rapidly elevate the temperature from room temperature to 190 °C within 30 seconds under 0.7 W cm-2 energy power from 808 nm laser irradiation. Moreover, it enables solar-driven water evaporation with an efficiency of 98.5% and a rate of 1.43 kg m-2 h-1 under 1 sun irradiation. This research provides valuable insights into the strategic design of efficient photothermal materials for effective NIR light absorption, leveraging the principles of aggregation effect and metalloradical chemistry.

Designing Electronic Structures of Multiscale Helical Converters for Tailored Ultrabroad Electromagnetic Absorption

HighlightsThe energy conversion mechanism is thoroughly analyzed, with a detailed quantitative characterization of the dissipation capacities of polarization, conduction, and magnetic loss.Inspired by DNA transcription, atom and geometry configurations co-modulating multi-scale helical converters achieve the RLmin of −63.13 dB at 1.29 mm, and the maximum RCS reduction value reach 36.4 dB m2.Orbital coupling, spin and cross polarization synergize to realize a 6.08 GHz EAB, further expanding to ultrabroad electromagnetic wave absorption of 12.16 GHz through metamaterial design.

A Comparative Review of Post-Combustion Capture and Direct Air Capture of CO2

Mitigating anthropogenic CO2 emissions has been a subject of incredible urgency in recent years. Carbon capture and storage (CCS) has emerged as a promising means of cutting emissions, with post-combustion capture and direct air capture (DAC) both gaining traction as methods of offsetting emissions from point sources and the ambient atmosphere. Each of these carbon capture methods rely on absorbent or adsorbent materials to function, whose properties can vastly impact capture performance. In this work, 14 materials are analyzed, with qualitative descriptions and performance data of each material based on existing review papers and representative case studies being presented. The review highlights limitations in the field in standardizing the reporting of experimental data, complicating the direct comparison of different materials’ efficacies. While no single CCS technology is found to be unequivocally superior, the promising performances of certain materials in earlier stages of development emphasize the importance of investing further in emerging post-combustion capture materials. This study concludes that CCS technologies are a necessary tool in ultimately reaching net zero emissions due to their role in neutralizing sectors resistant to decarbonization, but they should not be relied upon to substitute the transition to renewable energy, as the prevention of emissions should take priority over the abatement of emissions.

Mechanical and optical properties of MgTa2O6 compounds: First principles study

In this study, we have explored the electronic, optical, and mechanical properties of MgTa2O6 compounds in both tetragonal and orthorhombic phases using the first principles based on density functional theory (DFT) methods. Considering that GGA underestimates the band gap of materials, the HSE06 hybrid functional is performed to get a more accurate result for the band structure and optical property calculations. The calculations indicate that the tetragonal and orthorhombic phases exhibit different optical characteristics, showcasing their potential as exceptional materials for UV absorption. In addition, we have thoroughly investigated the elastic properties of MgTa2O6 for these two phases, including the bulk modulus, shear modulus, Young's modulus, and Poisson's ratio. The results indicate that the tetragonal phase has better volume deformation and shear deformation resistance, and the surface contours of Young's modulus for MgTa2O6 display anisotropy. And according to Pugh's criteria, the tetragonal phase has good ductile properties.

Investigating the Sound Absorption Properties of Silk Cotton and Other Sound-Absorbent Materials

This research investigates the acoustic properties of various materials to mitigate sound transmission and enhance acoustic environments, focusing on silk cotton, cotton wool, chipped foam, and open-cell polyurethane foam. The study evaluates these materials for sound absorption and reduction, considering sound frequency and material density. Materials were tested for their sound reduction and absorption coefficients, with silk cotton emerging as the most effective across a broad frequency spectrum, particularly below 200 Hz and above 1000 Hz. The research demonstrated that silk cotton, with its high porosity and fine fibre structure, achieved significant sound reduction even at low densities The findings align with theoretical predictions of resonance frequencies, showing a strong correlation (r2 = 0.9988 for the sound box and r2 = 0.9894 for the sound pipe). Sound intensity and sound pressure levels were measured using a sound level meter, and data analysis was conducted using graphing and calculating software. The researcher employed modified laboratory methods to account for loose materials and equipment limitations, validating the use of theoretical equations to estimate sound absorption and reduction properties The study provides some insights into using fibrous materials like silk cotton for noise reduction and acoustic enhancement. These findings have practical implications for improving sound quality in various environments, such as schools, studios, and public spaces, contributing to noise reduction strategies and enhancing auditory experiences.

Menstrual Disorders and Self-Care Practices: A Study on Prevalence among Female Undergraduate Students

Background: Menstrual disorders are a significant global public health issue affecting many women during their reproductive years. These disorders include irregularities in the menstrual cycle, heavy bleeding, amenorrhea (absence of menstruation), dysmenorrhea (painful periods), and premenstrual syndrome (PMS), leading to physical, behavioral, and emotional changes. Factors such as weight changes, stress, drug use, hormonal imbalances, and recent childbirth or miscarriage can disrupt menstrual patterns. Menstrual issues not only impact women's health and quality of life but also result in economic consequences and poor academic performance. Aim of the Study: This study aimed to investigate the prevalence of menstrual disorders and self-care practices among female undergraduates in Bangladesh, as well as explore potential factors that may influence these disorders. Methods: This cross-sectional study involved 180 female students at the Department of Obstetrics and Gynecology (outdoor) in Bangabandhu Sheikh Mujib Medical University, Dhaka from January 2021 December 2021. It aimed to assess the prevalence of menstrual disorders and self-care practices. Participants, aged 18-25 years and willing to participate, were selected via stratified random sampling. Data were collected using a structured questionnaire covering demographics, menstrual history, and self-care practices. SPSS version 26.0 was used for statistical analysis, employing descriptive statistics and the chi-square test to explore associations. A p-value of <0.05 was considered significant, providing a comprehensive assessment framework. Result: The sociodemographic profile of 180 participants shows that most are aged 21-25 years, with a mean age of 22.48±1.68 years. Early menarche was common among 88.33%, and 62.22% belonged to the low social class living in hostels. A significant proportion (82.78%) were single, with only 2.78% having experienced pregnancy. Parental sponsorship for education was prevalent (72.22%). Most participants correctly identified menstruation as a physiological process (66.67%) and knew menstrual blood originates from the uterus (62.78%). Common absorbent materials were disposable sanitary pads (88.89%). Patterns of menstrual health and self-care practices revealed proper hygiene but suboptimal management of menstrual disorders. Age, social class, education sponsorship, and knowledge of menstrual disorders significantly influenced self-care practices. Premenstrual syndrome and dysmenorrhea were the most common menstrual disorders. Conclusion: This research examines menstrual health knowledge, disorders, and self-care among female undergraduates, highlighting the impact of socio-demographic factors and educational support. It reveals significant knowledge gaps and underscores the need for better educational initiatives. Insights into menstrual disorders and self-care strategies provide guidance for targeted interventions and support within academic environments.

Directional Sound Field and Spatial Speech Decay: Impact of Sound Absorption and Screen Height in Performance Spaces and Open-Plan Offices

This study investigates the spatial decay rate of speech in performance spaces and open-plan offices, focusing on the effects of sound absorption and screen height. Utilising parameters such as D2, SD_2, SD2, S (decay rate) and Lp, A, S, 4mL_p, A, S, 4mLp, A, S, 4m (sound pressure level at 4 meters), the research evaluates how acoustic environments impact speech transmission. Through detailed experiments on different screen heights (1.2 m, 2.1 m, and 2.9 m) and material absorption, it was found that increasing screen height significantly reduces the spatial speech decay in open-plan offices, but only up to a certain threshold. The results suggest that while acoustic enhancements like screens and absorptive materials improve speech privacy, over-reliance on single- number ratings can lead to misclassification of office acoustics. This research provides insights for optimising room acoustics, ensuring speech privacy, and meeting acoustic comfort standards.

Multifunctional SiC nanowire aerogels with efficient electromagnetic wave absorption for applications in complex environments

In the digital age, with rapid advancements in electromagnetic (EM) technology, electromagnetic pollution has emerged as a significant concern. Traditional electromagnetic wave (EMW) absorption materials, however, are constrained by their limited application range, inadequate physicochemical stability, and inferior mechanical strength, hindering their further development and application. Consequently, there exists a demand for an EMW absorber that not only incorporates multiple functionalities but also retains essential physicochemical characteristics. In this context, this study introduces an ultralight (∼12 mg cm⁻³) and multifunctional SiC nanowire aerogel (SNWA), synthesized through a direct chemical vapor deposition (CVD) technique. The resulting SNWA demonstrates exceptional elasticity, outstanding mechanical durability, and high thermal stability at increased temperatures. Additionally, the enhanced SNWA shows improved hydrophobic properties, facilitating its use in highly humid conditions. The SNWA material also presents remarkable EMW absorption efficiency, with a minimum reflection loss of −50.6 dB and an effective absorption bandwidth of up to 7.7 GHz. The straightforward CVD synthesis and surface modification technique ensure the SNWA's durable and efficient performance in demanding environments.

Phase Engineering in a Twin‐Phase β/γ‐MoCx Lightweight Nanoflower with Matched Fermi Level for Enhancing Electron Transport Across the Polarized Interfaces in Electromagnetic Wave Attenuation

AbstractThe phase engineering of the polarization interface is of great significance in modifying dielectric loss in electromagnetic wave (EMW) attenuation process, but hard to conduct in a complex hybrid system. Herein, a twin‐phase of β/γ‐MoCx@CN with matched Fermi level and closed work function properties in lightweight MoCx nanoflower is constructed, facilitating electron transport withdraw enhanced conductivity and polarization. Moreover, the EMW multiple dissipations among the β/γ‐MoCx@CN polarization interface is promoted, displaying better matched impedance. It delivered a remarkable minimum reflection loss (RLmin) of −74.2 dB at the thickness of 1.5 mm, which far beyond the single phased β‐MoCx@CN, γ‐MoCx@CN and reported MoCx‐based EMW absorbers. The radar cross‐section (RCS) map of β/γ‐MoCx@CN is simulated, showing a brilliant maximum reduction value of 13.6 dB m2 at the theta angle of 30°. This work presented an excellent sample of atomic‐level manipulation of interfacial polarization in dielectric MoCx EMW absorption materials.

Heterogeneous interface engineering of spindle shaped Fe/C through optimizing impedance response for enhanced microwave absorption and thermal conductivity

Heterogeneous interface design is pivotal in creating lightweight, broadband, and high-efficiency electromagnetic wave (EMW) absorption materials. These materials enhance wave absorption by adaptively matching impedance. In this study, spindle-shaped Fe/C nanocomposites with heterogeneous interfaces and diverse surface microtopographies were synthesized by calcining iron-supported metal-organic frameworks (MOFs). During controlled pyrolysis, Fe3+ was reduced by carbon and conversely induced the graphitization of carbon, which is essential for the distribution and appearance of Fe and graphitized carbon as well as for modulating impedance matching. The porous structure of the Fe/C composites and the polarization loss and ferromagnetic resonance from the defective carbon and Fe magnetic particles synergistically enhance the wave absorption performance. The Fe/C-700 nanocomposite achieves a reflection loss (RL) of −55.9 dB at 12.48 GHz with an effective absorption bandwidth (EAB, RL ≤ −10 dB) of 3.9 GHz at 1.8 mm. The Fe/C-900 nanocomposite demonstrates a significant RL of −63.5 dB at 15.8 GHz with an EAB of 4.4 GHz between 13.6 GHz and 18 GHz at 1.5 mm, and an EAB of 5.5 GHz at 1.63 mm. These improvements are attributed to the impedance matching facilitated by the introduction of Fe magnetic particles and graphitized carbon. Additionally, the thermal conduction pathway formed among the Fe/C nanocomposites significantly enhances the thermal conductivity to 0.502 W m−1 K−1. Thus, this work offers a novel approach to the design of advanced wave-absorbing and thermal conductive materials by optimizing impedance through heterogeneous interfaces.

Multifunctional carbon Fiber@TiO2/C aerogels derived from MXene for pressure tunable microwave absorption

Developing microwave absorption (MA) materials with dynamically tunable performance stands as a pivotal endeavor to fulfill the escalating demands of electronic devices and military equipment in complex electromagnetic environments. This study presents advanced hierarchical CF@TiO2/C aerogels with pressure tunable MA performance, engineered through a novel in-situ oxidation process of MXene on carbon fiber (CF) substrates. This process facilitates the formation of a two-dimensional (2D) TiO2/C hybrid layer, which significantly enhances the polarization loss capabilities of the aerogels while maintaining excellent mechanical resilience. The unique architecture of these aerogels facilitates the modulation of their electrical conductivity and permittivity via pressure, thus enabling dynamically adjustable MA performance. Upon compression (50 %), the CF@TiO2/C aerogels showcase an outstanding effective absorption bandwidth (EAB) of 7.84 GHz, accompanied by a remarkable minimum reflection loss (RLmin) of −74.38 dB. Notably, the EAB of CF@TiO2/C aerogels can be precisely tuned from 4 to 18 GHz (covering the C-band, X-band, and Ku-band), with maximum changes in RLmin values (ΔRLmin) reaching as high as 59.30 dB, indicating substantial tunability under varying pressure. Moreover, the CF@TiO2/C aerogels also demonstrate outstanding thermal insulation and pressure sensing performance, highlighting their potential for multifunctional applications. This research not only sheds light on the intricate interplay between nanostructured materials and electromagnetic waves interactions but also sets a new strategy for the design of multifunctional, tunable microwave absorbers suitable for complex electromagnetic environments in modern electronic and military applications.