Absolute Measurements Research Articles

Podocyte density as a predictor of long-term kidney outcome in obesity-related glomerulopathy

Glomerulomegaly and focal segmental glomerulosclerosis are histopathological hallmarks of obesity-related glomerulopathy (ORG). Podocyte injury and subsequent depletion are regarded as key processes in the development of these glomerular lesions in patients with ORG, but their impact on long-term kidney outcome is undetermined. Here, we correlated clinicopathological findings and podocyte depletion retrospectively in patients with ORG. Relative (podocyte density) and absolute (podocyte number per glomerulus) measures of podocyte depletion were estimated using model-based stereology in 46 patients with ORG. The combined endpoint of kidney outcomes was defined as a 30% decline in estimated glomerular filtration rate (eGFR) or kidney failure. Patients with lower podocyte density were predominantly male and had larger body surface area, greater proteinuria, fewer non-sclerotic glomeruli, larger glomeruli and higher single-nephron eGFR. During a median follow-up of 4.1 years, 18 (39%) patients reached endpoint. Kidney survival in patients with lower podocyte density was significantly worse than in patients with higher podocyte density. However, there was no difference in kidney survival between patient groups based on podocyte number per glomerulus. Cox hazard analysis showed that podocyte density, but not podocyte number per glomerulus, was associated with the kidney outcomes after adjustment for clinicopathological confounders. Thus, our study demonstrates that a relative depletion of podocytes better predicts long-term kidney outcomes than does absolute depletion of podocytes. Hence, the findings implicate mismatch between glomerular enlargement and podocyte number as a crucial determinant of disease progression in ORG.

Kinetic Predictors of Weightlifting Performance in Young Weightlifters.

Morris, SJ, Oliver, JL, Pedley, JS, Radnor, JM, Haff, GG, Cooper, S-M, and Lloyd, RS. Kinetic predictors of weightlifting performance in young weightlifters. J Strength Cond Res 38(9): 1551-1560, 2024-Relationships between force-generating capabilities and weightlifting performance ( e.g ., snatch, clean and jerk [C&J], and combined total) have previously been explored in adult weightlifters; however, associations in young athletes are unknown. The purpose of this study was twofold: (a) to examine the relationships between countermovement jump (CMJ) and isometric midthigh pull (IMTP) kinetics and weightlifting performance in young weightlifters and (b) to determine the proportion of weightlifting performance that could be accounted for by CMJ and IMTP kinetics using principal component analysis (PCA). Thirty-seven young weightlifters (12-18 years of age) completed 3 trials of CMJ and 2 trials of the IMTP assessments on dual force plates. Recent competition maximum loads, obtained within 2 weeks of the data collection, for the C&J and snatch were also recorded. Pearson's zero-order correlation coefficients demonstrated moderate to very high correlations ( r = 0.359-0.801; all p ≤ Benjamini-Hochberg critical values [ B-Hα ]) between CMJ kinetic variables, including jump height, average braking force, average braking velocity, absolute and relative braking net impulse, absolute and relative force at minimum displacement, absolute and relative propulsive force, absolute and relative propulsive net impulse and average propulsive velocity, and weightlifting performance. High to very high correlations were evident between IMTP peak force and relative peak force and all weightlifting performance metrics (snatch, C&J, combined total, combined total [kg]/body mass [kg -0.67 ], and Sinclair's total; r = 0.538-0.796; p ≤ B-Hα ). Components from the PCA were used to conduct stepwise, multiple, linear regression analyses. Moderate (45.8-52.9%) and large percentages (79.1-81.3%) of variance in absolute measures of weightlifting performance were explained by IMTP peak force variables and CMJ propulsive variables, respectively. These novel findings indicate that IMTP peak force variables and CMJ propulsive variables could provide valuable insight for talent identification and long-term athletic development in junior weightlifting pathways.

Inclusive and differential cross-section measurements of tt¯Z\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ t\\overline{t}Z $$\\end{document} production in pp collisions at s\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ \\sqrt{s} $$\\end{document} = 13 TeV with the ATLAS detector, including EFT and spin-correlation interpretations

Measurements of both the inclusive and differential production cross sections of a top-quark-top-antiquark pair in association with a Z boson (tt¯Z\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ t\\overline{t}Z $$\\end{document}) are presented. Final states with two, three or four isolated leptons (electrons or muons) are targeted. The measurements use the data recorded by the ATLAS detector in pp collisions at s\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ \\sqrt{s} $$\\end{document} = 13 TeV at the Large Hadron Collider during the years 2015–2018, corresponding to an integrated luminosity of 140 fb−1. The inclusive cross section is measured to be σtt¯Z\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ {\\sigma}_{t\\overline{t}Z} $$\\end{document} = 0.86 ± 0.04 (stat.) ± 0.04 (syst.) pb and found to be in agreement with the most advanced Standard Model predictions. The differential measurements are presented as a function of a number of observables that probe the kinematics of the tt¯Z\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ t\\overline{t}Z $$\\end{document} system. Both the absolute and normalised differential cross-section measurements are performed at particle level and parton level for specific fiducial volumes, and are compared with NLO+NNLL theoretical predictions. The results are interpreted in the framework of Standard Model effective field theory and used to set limits on a large number of dimension-6 operators involving the top quark. The first measurement of spin correlations in tt¯Z\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ t\\overline{t}Z $$\\end{document} events is presented: the results are in agreement with the Standard Model expectations, and the null hypothesis of no spin correlations is disfavoured with a significance of 1.8 standard deviations.

Research on momentum conversion in sports

Momentum, traditionally examined in sports, is an ability to increase or develop continuously, impacting mental and physical performance in a pattern akin to human preferences, which are complex and non-linear. This research explores momentum in sports, particularly tennis, integrating it with the economic concept of diminishing marginal utility to analyze momentum shifts. Using data from the 2023 Wimbledon men's singles, the study dissects momentum into absolute and relative measures, revealing server advantage and precise models with an R-square value of 0.877. It employs macro and micro perspectives to link momentum with success, affirming its significant impact on win rates and performance dimensions. A GARCH model identifies influential factors in momentum transitions, informing strategies for game control. Applying the model to basketball, specifically a 2024 Clippers-Celtics NBA game, maintains strong predictive capabilities, indicating its broader applicability. Practical recommendations for tennis coaches and players, grounded in empirical findings, conclude the study, emphasizing strategic momentum utilization.

Sex and age characteristics of thunderstorm asthma emergency department visits

Severe asthma has been shown to occur in the combined presence of high pollen and thunderstorm conditions, also known as ‘thunderstorm asthma.’ First studied as severe epidemic events, recent longitudinal work studied less dramatic but more frequent occurrences. We explore thunderstorm asthma-related emergency department visits in the Minneapolis-St. Paul metropolitan area and evaluated risk differences by sex and age. We define a thunderstorm asthma exposure event as the daily occurrence of 2 or more lightning strikes during high pollen periods, and use daily counts of asthma-related emergency department visits to estimate relative and absolute risk of severe asthma during thunderstorm asthma events for the full population and for sex and age subgroups. The overall population had a 1.06 (95 % CI: 1.02, 1.09) times higher risk of asthma-related ED visits during thunderstorm asthma events compared to days without thunderstorm asthma events. Children under 18 show no higher risk (RR 1.02; 95 % CI: 0.97 1.08), but adults 18–44 years (RR 1.08; 95 % CI: 1.02, 1.13) and 45 and up (RR 1.08; 95 % CI 1.02, 1.15) show higher relative risk. Absolute risk measures show similar patterns to the age and sex results, but age-sex subgroups show more variation in absolute vs relative risk. Our results support an association between ED visits and thunderstorm asthma and provide evidence of varying risks by sex across the life course. These differences in risk have implications for clinical treatment of this allergic type of asthma and for future research into this poorly recognized environmental exposure.Plain Language Summary: Recent research has highlighted the existence of Thunderstorm asthma events, a phenomenon in which pollen grains rupture in the conditions that occur with a thunderstorm, releasing sub-pollen particles that are capable of triggering severe asthma in susceptible populations. Where severe asthma is a disease that usually impacts children, we find in this study that asthma ED visits associated with thunderstorm asthma events more frequently impact adults, particularly males 18–44 and females 45 and up.

Absolute Poverty Measurement with Minimum Food Needs: A New Inverse Method for Advanced Economies

Spurred by the need for increased adequacy and international comparability, absolute poverty measures are gaining in policy relevance around the world. This paper proposes a simple and feasible method of calculating absolute poverty thresholds on the basis of households’ minimum food needs in advanced economies. It makes three important contributions. First, it demonstrates that conventional statistical methods used in the developing world deliver either unrealistically low or improbably high poverty estimates in rich countries where household spending on food is modest in relative terms. Second, it proposes a new simulation-based inverse method that focuses on the non-food Engel curve and uses predetermined minimum food bundles not as inputs but as targeted reference points in order to calculate adequate poverty thresholds. Finally, an empirical application of the new method using household budget survey data from Italy shows that resulting poverty estimates are comparable to the official figures of the Italian Statistical Office in terms of both the poverty rate and the poverty profiles. Requiring few and easily procurable resources, the proposed algorithm is well suited to produce robust, consistent and internationally comparable absolute poverty estimates in a large number of developed countries and emerging economies.

Intradevice Repeatability and Interdevice Comparison of Two Specular Microscopy Devices in a Real-Life Setting: Tomey EM-4000 and Nidek CEM-530.

Background and Objectives: The purpose of this study was to compare two commercially available specular microscopes (Tomey EM-4000 and Nidek CEM-530) in a real-life clinical setting in terms of intra- and interdevice variability. The study was conducted on all patients seen in a clinical practice specializing in anterior segment pathologies, regardless of the purpose of their visit. Materials and Methods: In total, 112 eyes of 56 patients (age 23-85 years old) were included in the study. Each eye was measured three times with each device (for a total of six measurements), and results for central corneal thickness (CCT) and corneal endothelial cell density (ECD) were recorded. The results were then evaluated with the D'Agostino-Pearson normality test and compared with a Wilcoxon signed-rank test, t-test, ANOVA or Mann-Whitney test for intra- and interdevice variability. Results: Both specular microscopes produced very reliable reproducible intradevice results: The Tomey EM-4000 measured an ECD of 2390 ± 49.57 cells/mm2 (mean ± standard error of mean); the range was 799-3010 cells/mm2. The determined CCT was 546 ± 5.104 µm (mean ± standard error of mean [SEM]); the range was 425-615 µm. The measurements with the Nidek CEM-530 revealed an ECD of 2417 ± 0.09 cells/mm2 (mean ± SEM); the range was 505-3461 cells/mm2 (mean ± SEM). The mean CCT detected was 546.3 ± 4.937 µm (mean ± SEM); the range was 431-621 µm. The interdevice differences were statistically significant for both parameters, ECD (p = 0.0175) and CCT (p = 0.0125) (p < 0.05). Conclusions: The Nidek CEM-530 and the Tomey EM-4000 both produced reliable and reproducible results in terms of ECD and CCT. The absolute measurements were statistically significantly different for CCT and ECD for both devices; the Nidek produces slightly higher values.

Velocity And Concentration Measurements Of Supersonic Underexpanded Jets

The release of high-speed gas jets due to a tank leakage can pose a substantial safety hazard, as it can give rise to flammable, explosive, or toxic mixtures. Hence, understanding jet dispersion in real-world conditions is crucial for designing effective safety measures. Existing targeted or traceable studies provide velocity field data, but limitations in source-driven-pressures, nozzle geometries, or cross-flow conditions restrict their representativeness under real conditions. Indeed, an exhaustive experimental dataset for supersonic underexpanded gas jet dispersion under the influence of an Atmospheric Boundary Layer (ABL) is currently lacking. As part of a collaboration with the CEA, the von Karman Institute is continuing research efforts towards the development of high quality nonintrusive, optical measurement techniques for the characterization of the velocity and the concentration of a supersonic underexpanded jet submitted to different cross-flow conditions. The research explicitly targets measurements far from the release point within the self-similar region. Such measurements have already been tried on a supersonic jet without cross-flow and with a uniform velocity low-speed cross-flow [2], but never under the influence of an ABL. By filling this gap, the objective of the present work is to further improve the dispersion characterization by combining different techniques, such as Laser Mie Scattering and Light Extinction Spectroscopy (LES). To evaluate the dispersion within the self-similar region up to x/D ≈ 100, a significant FOV 1 is required. Therefore, Large-Scale Particle Image Velocimetry (LS-PIV) has been adapted and successfully applied to measure the velocity field. Prominent results have been obtained and comparable to standard PIV measurements. The pronounced variation in velocity magnitude observed while transitioning from the potential core to the self-similar region requires collecting multiple datasets to cover the broad spectrum of velocities comprehensively. A Mie scattering theory-based technique has been used to retrieve a relative concentration field. It is a non-intrusive technique that operates on the same experimental images produced by the LS-PIV campaign, assuming that light scattered by particles within a specific volume is proportional to the number of particles within this volume. The algorithm for concentration retrieval was adapted from and consequently improved for the present case. Discrepancies in the scaled concentration evolution among different nozzle diameters highlighted the necessity for refining the technique. This emphasizes accurately determining the reference concentration in a region free from intricate phenomena such as multiple scattering. The absolute and independent concentration measurement is done via Light Extinction Spectroscopy (LES). The LES technique measures the transmittance spectrum T of a collimated light beam passing through the particle-laden flow. This method has successfully been applied to several types of flows with similar seeding particles and concentration quantities (e.g. PSD 2 ). The extrapolation of absolute concentration parameters relies on the regularized solution of an ill-conditioned inverse problem. This solution is derived using the transmittance recorded during the test as the primary input parameter. The system to solve exhibits high sensitivity to small perturbations, making it challenging to employ numerical techniques confidently. Due to the substantial impact of minor perturbations in initial conditions on the system solution, a meticulous adaptation of the technique to the demands of compressible flows is necessary and still ongoing. The setup consists of a Deuterium-Tungsten Halogen UV-NIR light source emitting a divergent beam of light towards a 90◦ off-axis parabolic mirror, which collimates and deviates it into a beam to the jet. After passing through the jet, the resulting attenuated light beam goes into a collector mirror, redirecting it into a composite grating spectrometer UV-NIR with a 200 − 1100 nm wavelength range with 0.5 nm optical resolution. The results will examine the dispersion pattern and feature in terms of velocity and concentration of a supersonic underexpanded jet produced by an upstream tank with total pressure ranging from 5 to 9 bar without cross-flows. The latter will provide a foundation for successive studies on supersonic underexpanded jets subjected to an ABL.

Pixelation with Concentration‐Encoded Effective Photons for Quantitative Molecular Optical Sectioning Microscopy

AbstractIrreproducibility in molecular optical sectioning microscopy has hindered the transformation of acquired digital images from qualitative descriptions to quantitative data. Although numerous tools, metrics, and phantoms have been developed, accurate quantitative comparisons of data from different microscopy systems with diverse acquisition conditions remains a challenge. Here, they develop a simple tool based on an absolute measurement of bulk fluorophore solutions with related Poisson photon statistics, to overcome this obstacle is developed. Demonstrated in a prototypical multiphoton microscope, this tool unifies the unit of pixelated measurement to enable objective comparison of imaging performance across different modalities, microscopes, components/settings, and molecular targets. The application of this tool in live specimens identifies an attractive methodology for quantitative imaging, which rapidly acquires low signal‐to‐noise frames with either gentle illumination or low‐concentration fluorescence labeling.

Noise Level of a Ring Laser Gyroscope in the Femto-Rad/s Range.

Absolute angular rotation rate measurements with sensitivity better than prad/s would be beneficial for fundamental science investigations. In this regard, large frame Earth based ring laser gyroscopes are top instrumentation as far as bandwidth, long-term operation, and sensitivity are concerned. Here, we demonstrate that the GINGERINO active-ring laser upper limiting noise is close to 2×10^{-15} rad/s for ∼2×10^{5} s of integration time, as estimated by the Allan deviation evaluated in a differential measurement scheme. This result is more than a factor of 10 better than the theoretical prediction so far accounted for ideal ring lasers shot-noise with the two beams counterpropagating inside the cavity considered as two independent propagating modes. This feature is related to the peculiarity of real ring laser system dynamics that causes phase crosstalking among the two counterpropagating modes. In this context, the independent beam model is, then, not applicable, and the measured noise limit falls below the expected one.

Comparing novel small-angle x-ray scattering approaches for absolute size and number concentration measurements of spherical SiO2 particles to established methods

Biomedical analytical applications, as well as the industrial production of high-quality nano- and sub-micrometre particles, require accurate methods to quantify the absolute number concentration of particles. In this context, small-angle x-ray scattering (SAXS) is a powerful tool to determine the particle size and concentration traceable to the Système international d’unités (SI). Therefore, absolute measurements of the scattering cross-section must be performed, which require precise knowledge of all experimental parameters, such as the electron density of solvent and particles, whereas the latter is often unknown. Within the present study, novel SAXS-based approaches to determine the size distribution, density and number concentrations of sub-micron spherical silica particles with narrow size distributions and mean diameters between 160 nm and 430 nm are presented. For the first-time traceable density and number concentration measurements of silica particles are presented and current challenges in SAXS measurements such as beam-smearing, poorly known electron densities and moderately polydisperse samples are addressed. In addition, and for comparison purpose, atomic force microscopy has been used for traceable measurements of the size distribution and single particle inductively coupled plasma mass spectrometry with the dynamic mass flow approach for the accurate quantification of the number concentrations of silica particles. The possibilities and limitations of the current approaches are critically discussed in this study.

Absolute energy-dependent scintillating screen calibration for real-time detection of laser-accelerated proton bunches.

Laser-plasma accelerators (LPAs) can deliver pico- to nanosecond long proton bunches with ≳100 nC of charge dispersed over a broad energy spectrum. Increasing the repetition rates of today's LPAs is a necessity for their practical application. This, however, creates a need for real-time proton bunch diagnostics. Scintillating screens are one detector solution commonly applied in the field of electron LPAs for spatially resolved particle and radiation detection. Yet their establishment for LPA proton detection is only slowly taking off, also due to the lack of available calibrations. In this paper, we present an absolute proton number calibration for the scintillating screen type DRZ High (Mitsubishi Chemical Corporation, Düsseldorf, Germany), one of the most sensitive screens according to calibrations for relativistic electrons and x rays. The presented absolute light yield calibration shows an uncertainty of the proton number of 10% and can seamlessly be applied at other LPA facilities. For proton irradiation of the DRZ High screen, we find an increase in light yield of >60% compared to reference calibration data for relativistic electrons. Moreover, we investigate the scintillating screen light yield dependence on proton energy since many types of scintillators (e.g., plastic, liquid, and inorganic) show a reduced light yield for increased local energy deposition densities, an effect termed ionization quenching. The ionization quenching can reduce the light yield for low-energy protons by up to ∼20%. This work provides all necessary data for absolute spectral measurements of LPA protons with DRZ High scintillating screens, e.g., when used in the commonly applied Thomson parabola spectrometers.

Absolute thickness field measurement on curved axisymmetric thin free films with monochromatic light

The thickness of thin films is a key parameter to understand their thinning dynamics and stability. Thickness measurements are commonly performed using interferometry. White light illumination allows us to measure the absolute thickness, but is limited to small thicknesses (&amp;lt;2μm) or is restricted to a point with a spectrometer. Monochromatic light gives access to a broader range of thicknesses but solely in a relative manner unless a reference thickness is known. These methods are extensively used to quantify the thickness profiles of flat soap films. In contrast, they are applied to curved interfaces (bubbles) only in a few specific cases, mainly due to the complexity arising from the curvature as the optical path depends on the position. In this paper, we elucidate the influence of the curvature and show that it can be used to measure the entire and absolute thickness profiles using monochromatic light. We demonstrate the validity of the method on soap bubbles, antibubbles, and catenoid soap films. This cost-effective technique is adapted to quantitatively study the thin film dynamics in these geometries.

A Trial Evaluation of Rock Core DCDA Absolute Shear Stress Measurement for Routine Quantitative Mining Hazard Assessment in Deep Underground High Stress Mines

A Trial Evaluation of Rock Core DCDA Absolute Shear Stress Measurement for Routine Quantitative Mining Hazard Assessment in Deep Underground High Stress Mines

Liquid-to-gas transfer of sodium in a liquid cathode glow discharge

Plasma-liquid interactions have been extensively studied with a focus on the transport of reactive species from the plasma to the liquid phase and their induced liquid phase chemistry and resulting applications. While solute transfer from the liquid to the gas phase in plasmas has been widely used in analytical chemistry, the underlying processes remain relatively unexplored. We report spatially and temporally resolved absolute density measurements of sodium in a plasma with a NaCl solution cathode using two-photon absorption laser induced fluorescence (TaLIF). The observed non-linear increase in sodium density with solution conductivity is shown to correlate with droplet generation as visualized by Mie scattering. The findings are explained by droplet generation by electrospray induced by Taylor cone formation as underpinning mechanism for the introduction of sodium in the plasma. An analytical sheath model combined with a scaling law shows an increase in electric field force with solution conductivity that is consistent with the observed non-linear increase in sodium density in the plasma with solution conductivity.

Development and performance testing of a chamber for absorbed dose in water absolute measurement for 125I brachytherapy seeds

The application of more and more low-energy, low-dose-rate photon radiation seeds in brachytherapy. According to the TG43 report and TG43-U1 report issued by the American Association of Physicists in Medicine, both apparent activity and air kerma strength are physical characterization parameters of brachytherapy seed strength,which are needed to convert into water absorbed dose at the depth of 1 cm. At present, the method of obtaining the water absorbed dose is to convert the air kerma strength, the uncertainty of results exceeds 5% (k = 1), which could reduce the cure rate of the treatment. In order to address this issue ,the China Institute of Atomic Energy has designed a device that can directly replicate the water absorbed dose of 125I brachytherapy seeds,which is an extrapolation chamber embedded with water equivalent material. In order to evaluate the performance of the extrapolation chamber, a series of experiments were carried out, including partial pressure test, leakage current, saturation curve, response linearity, collection area and zero point position. The test results show that the performance parameters of the extrapolation chamber meet the relevant requirements.

Assessing Coriolis meter performance in multicomponent carbon dioxide-rich mixtures

Accurate flow measurement plays a pivotal role in monitoring CO2 flows across the CCS value chain. This not only bolsters the overall business model of the CCS industry, but also ensures adherence to environmental legislations and regulatory requirements. Unlike other industrial process fluids, such as water, oil & natural gas, it is unclear whether current commercially available metering technologies can meet the requisite accuracy levels, specifically the ±2.5 % recommended within the EU/UK European Trading Scheme for CO2 mass transfer. Accordingly, the aim of this work was to gain a comprehensive understanding of CO2 flow measurement within the context of CCS transport conditions. Firstly, GERG-2008 equation of state was implemented on REFPROP v10 to predict the optimal transport conditions for CO2-rich mixtures and to understand the influence of non-condensable gas impurities in CCS flow operations. Then, a dedicated laboratory-scale gravimetric flow facility was designed and used to evaluate the performance of a Coriolis flow meter under gas, liquid, and supercritical flow conditions. The results indicate that the impurities have a relatively minor impact on the measurement performance of the meter, with maximum mean absolute measurement errors of 0.25 %, 0.12 %, and 0.28 % observed in gas, liquid, and supercritical CO2 flow conditions, respectively. The findings support the use of Coriolis metering technology as a reliable option for CCS metering, underscoring its suitability for accurate measurements in single-phase CO2 transport applications.

Antenna Design for Absolute Sky Measurements at Gigahertz Frequencies—a First Step toward Detecting CMB Spectral Distortions from Recombination

There exist inevitable deviations in the cosmic microwave background spectrum from that of a blackbody. The additive distortions from photons emitted over the epoch of recombination are one such deviation. We present a novel scalable broadband antenna design motivated by detecting these spectral distortions in the 2.5–4 GHz band. This antenna is capable of maintaining the spectral quality of the measured sky spectrum to 1 part in 103 over the full band and outperforms conventional broadband antennas by at least an order of magnitude. While this is not sufficient to make a direct detection of the cosmological recombination radiation, it meets the baseline design criteria for an experiment that can make an absolute measurement of the sky spectrum at the millikelvin level, thereby making it capable of improving foreground models to global signal detection experiments (including those from cosmic dawn and the epoch of reionization) and addressing the problem of the excess radio background at 3.3 GHz reported by the ARCADE2 experiment.

The Conclusion Generator

PurposeReliance on null hypothesis significance testing often leads to misinterpretation of research results. Common misinterpretations include that a statistically nonsignificant difference (p ≥ 0.05) implies no difference between groups, and that a statistically significant finding (p < 0.05) is unbiased and clinically important. We aimed to develop a tool — the Conclusion Generator — to mitigate these misconceptions. MethodsWe reviewed the content of the Conclusion Generator and validated its output using published and simulated data. ResultsThe Conclusion Generator is a free online application designed to generate conclusions for scientific papers based on the values and clinical interpretation of the point estimate and confidence interval. Both relative and absolute measures of effect are supported. It offers two modes for interpretation: (1) Statistical mode provides an accurate statistical interpretation of results, with an optional specification of superiority and noninferiority bounds; (2) Clinical mode evaluates the clinical importance of the point estimate and confidence limits as specified by the user. Both modes assume no uncontrolled biases. Users must specify the number of decimals, the direction of a beneficial effect (e.g., relative risk <1 vs. >1), and the level of detail (concise vs. elaborated) for the output. The validation confirmed the Conclusion Generator's capability to interpret research results, considering random error and clinical relevance, while avoiding common misinterpretations associated with null hypothesis significance testing. ConclusionsThe Conclusion Generator facilitates an appropriate interpretation of research results by emphasizing estimation and clinical relevance over hypothesis testing.

Absolute Activity Measurement of 125I Seed Brachytherapy by Two-dimensional Photon-photon Coincidence Spectroscopy

Absolute Activity Measurement of 125I Seed Brachytherapy by Two-dimensional Photon-photon Coincidence Spectroscopy