Ketones Research Articles

CuI-Amidobis(phosphine)-Catalyzed Direct Amidation of Unactivated Alkanes via C(sp3)-H Activation.

Herein, we describe an acid-base-free, sustainable, and efficient method for direct amidation of unactivated alkanes and toluene derivatives, using the dimeric CuI complex [CuI{o-Ph2PC6H4CONC6H4PPh2-o}2] (here onward referred to as [PNP-Cu]2). Using this method, C(sp3)-N bond formation was achieved through the activation of very challenging C(sp3)-H bonds in cycloalkanes, alkenes, allyl groups, and benzyl groups, with tolerance toward ketonic groups, heterocycles, and halide functionalities. One of the precatalysts, (PNHP-Cu-Npht) was isolated and structurally characterized. Isomerization in allyl-functionalized alkanes and selective benzylic alkylation in ketones were observed. This is a novel method for C(sp3)-N bond formation via direct N-alkylation of phthalimide, sulfonamide, benzamide, and phosphamidate.

Isosorbide-based Poly(arylene ether) biopolymer membranes for gas separation

Efforts to utilize biopolymer membranes to diminish the carbon footprint of separation processes are ongoing. Herein, we report the fabrication of isosorbide (ISB)-based poly(arylene ether) biopolymer membranes, including ISB-based poly(arylene ether sulfone) (I-PAES) and ISB-based poly(arylene ether ketone) (I-PAEK) for gas separation. The robust mechanical properties and amorphous nature of ISB-based biopolymers allow for their application to gas separations. Both positron annihilation lifetime spectroscopy (PALS) and free volume analysis using density measurements reveal that replacing bisphenol A (BPA) in polysulfone (PSF) with ISB results in a significant reduction in free volume owing to the absence of bulky dimethyl groups and the presence of polar aliphatic ether groups. Substituting the sulfone group for a ketone group further decreased free volume. Solid-state CP/MAS 13C NMR analysis discloses that substituting ISB and replacing sulfonyl moieties with carbonyl groups restricts the rotational motion of internal rings, resulting in inhibited gas diffusion. Consequently, the I-PAEK membrane exhibited H2/CO2 and H2/CH4 selectivities more than three times and five times higher, respectively, compared to the PSF counterpart. Our present study demonstrates the feasibility of ISB-based poly(arylene ether) biopolymer membranes for gas separation.

Raman Vibrational Signatures of Excited States of Echinenone in the Orange Carotenoid Protein (OCP) and Implications for its Photoactivation Mechanism

In this study, the vibrational characteristics of optically excited echinenone in various solvents and the Orange Carotenoid Protein (OCP) in red and orange states are systematically investigated through steady-state and time-resolved spectroscopy techniques. Time-resolved experiments, employing both Transient Absorption (TA) and Femtosecond Stimulated Raman Spectroscopy (FSRS), reveal different states in the OCP photoactivation process. The time-resolved studies indicate vibrational signatures of exited states positioned above the S1 state during the initial 140 fs of carotenoid evolution in OCP, an absence of a vibrational signature for the relaxed S1 state of echinenone in OCP, and more robust signatures of a highly excited ground state (GS) in OCP. Differences in S1 state vibration population signatures between OCP and solvents are attributed to distinct conformations of echinenone in OCP and hydrogen bonds at the keto group forming a short-lived intramolecular charge transfer (ICT) state. The vibrational dynamics of the hot GS in OCP show a more pronounced red shift of ground state CC vibration compared to echinenone in solvents, thus suggesting an unusually hot form of GS. The study proposes a hypothesis for the photoactivation mechanism of OCP, emphasizing the high level of vibrational excitation in longitudinal stretching modes as a driving force. In conclusion, the comparison of vibrational signatures reveals unique dynamics of energy dissipation in OCP, providing insights into the photoactivation mechanism and highlighting the impact of the protein environment on carotenoid behavior. The study underscores the importance of vibrational analysis in understanding the intricate processes involved in early phase OCP photoactivation.

Discovery of (±)-Penindolenes Reveals an Unusual Indole Ring Cleavage Pathway Catalyzed by P450 Monooxygenase.

(±)-Penindolenes A-D (1-4), the first representatives of indole terpenoids featuring a γ-lactam skeleton, were isolated from the mangrove-derived endophytic fungus Penicillium brocae MA-231. Our bioactivity tests revealed their potent antimicrobial and acetylcholinesterase inhibitory activities. The biosynthetic reactions by the five enzymes PbaABCDE leading to γ-lactam ring formation were identified with heterologous expression and in vitro enzymatic assays. Remarkably, the cytochrome P450 monooxygenase PbaB and its homolog in Aspergillus oryzae catalyzed the 2,3-cleavage of the indole ring to generate two keto groups in 1. This is the first example of the oxidative cleavage of indole by a P450 monooxygenase. In addition, rare secondary amide bond formation by the glutamine synthetase-like enzyme PbaD was reported. These findings will contribute to the engineered biosynthesis of unnatural, bioactive indole terpenoids.

Discovery of (±)‐Penindolenes Reveals an Unusual Indole Ring Cleavage Pathway Catalyzed by P450 Monooxygenase

Abstract(±)‐Penindolenes A−D (1–4), the first representatives of indole terpenoids featuring a γ‐lactam skeleton, were isolated from the mangrove‐derived endophytic fungus Penicillium brocae MA‐231. Our bioactivity tests revealed their potent antimicrobial and acetylcholinesterase inhibitory activities. The biosynthetic reactions by the five enzymes PbaABCDE leading to γ‐lactam ring formation were identified with heterologous expression and in vitro enzymatic assays. Remarkably, the cytochrome P450 monooxygenase PbaB and its homolog in Aspergillus oryzae catalyzed the 2,3‐cleavage of the indole ring to generate two keto groups in 1. This is the first example of the oxidative cleavage of indole by a P450 monooxygenase. In addition, rare secondary amide bond formation by the glutamine synthetase‐like enzyme PbaD was reported. These findings will contribute to the engineered biosynthesis of unnatural, bioactive indole terpenoids.

The coupling transformation process of biodegradation and pyrolysis for Dananhu low-rank coal

The study presented a novel approach for coupling biodegradation and pyrolysis to transform low-rank coal. In the first stage, four kinds of bacteria, Planomicrobium huatugouensis (P. huatugouensis), Sphingomonas polyaromaticivorans (S. polyaromaticivorans), Pseudomonas putida (P. putida), and Bacillus subtilis subsp. subtilis (B. subtilis subsp. subtilis), were used to transform the Dananhu low-rank coal. After the first stage, the coal that has not been biodegraded (residual coal) undergoes the second stage of pyrolytic transformation, which is carried out by a thermogravimetric analyzer combined with Fourier-transform infrared spectrometry (TG-FTIR). The results showed that the maximum coupling transformation rate of biodegradation and pyrolysis could reach 73.95%, which was 21.88% higher than the thermal transformation rate of Dananhu low-rank coal and 27.37% higher than the optimal microbial transformation rate. This indicated that coupling transformation could significantly improve the utilization rate of Dananhu low-rank coal. In the stage of biodegradation transformation, bacteria destroyed the carboxyl groups, ether bonds, and other oxygen-containing functional groups in Dananhu low-rank coal, converting the large molecules of coal into liquid molecules, meanwhile, the compact coal structure became loose, and the residual coal was also pyrolyzed easily than Dananhu low-rank coal. During the pyrolysis process, a large number of fatty chains, carboxyl groups, oxy groups, and hydroxy groups were decomposed to produce lots of gas-phase products. The pyrolysis products showed an increase in the release of CO and CH4, and an increase in the proportion of aliphatic hydrocarbons in the volatiles. The high efficiency of coupling transformation is due to the combination of the advantages of the two technologies, which is achieving the green and energy-efficient utilization of low-rank coal.

Reductive dissolution of As-bearing iron oxides: Mediating mechanism of fulvic acid and dissimilated iron reducing bacteria

Fulvic acid (FA) and iron oxides often play regulating roles in the geochemical behavior and ecological risk of arsenic (As) in terrestrial ecosystems. FA can act as electron shuttles to facilitate the reductive dissolution of As-bearing iron (hydr)oxides. However, the influence of FA from different sources on the sequential conversion of Fe/As in As-bearing iron oxides under biotic and abiotic conditions remains unclear. In this work, we exposed prepared As-bearing iron oxides to FAs derived from lignite (FAL) and plant peat (FAP) under anaerobic conditions, tracked the fate of Fe and As in the aqueous phase, and investigated the reduction transformation of Fe(III)/As(V) with or without the presence of Shewanella oneidensis MR-1. The results showed that the reduction efficiency of Fe(III)/As(V) was increased by MR-1, through its metabolic activity and using FAs as electron shuttles. The reduction of Fe(III)/As(V) was closely associated with goethite being more conducive to Fe/As reduction compared to hematite. It is determined that functional groups such as hydroxy, carboxy, aromatic, aldehyde, ketone and aliphatic groups are the primary electron donors. Their reductive capacities rank in the following sequence: hydroxy> carboxy, aromatic, aldehyde, ketone> aliphatic group. Notably, our findings suggest that in the biotic reduction, Fe significantly reduction precedes As reduction, thereby influencing the latter's reduction process across all incubation systems. This work provides empirical support for understanding iron's role in modulating the geochemical cycling of As and is of significant importance for assessing the release risk of arsenic in natural environments.

Synthesis, Characterization and Antimicrobial and Anticancer Evaluations of Some Novel Heteroannulated Difuro[3,2-c:3',2'-g]Chromenes.

The goal of this study was directed to synthesize a novel class of annulated compounds containing difuro[3,2-c:3',2'-g]chromene. Friedländer condensation of o-aminoacetyl derivative 3 was performed with some active methylene ketones, namely, 1,3-cyclohexanediones, pyrazolones, 1,3-thiazolidinones and barbituric acids, furnished furochromenofuroquinolines (4,5), furochromenofuropyrazolopyridines (6-8), furochromenofurothiazolopyridines (9,10) and furochromenofuropyridopyrimidines (11, 12), respectively. Also, condensation of substrate 3 with 5-amine-3-methyl-1H-pyrazole and 6-amino-1,3-dimethyluracil, as cyclic enamines, resulted in polyfused systems 13 and 14, respectively. In vitro antimicrobial efficiency of the prepared heterocycles against microbial strains exhibited variable inhibition action, where compound 3 was the most effective against all kinds of microorganisms. A significant cytotoxic activity was seen upon the annulation of the starting compound with thiazolopyridine (9 and 10) as well as pyridopyrimidine moieties (11, 12 and 14). The spectroscopic and analytical results were used to infer the structures of the novel synthesized compounds.

Cobalt‐Catalyzed Wacker‐Type Aerobic Oxidation of Olefins into Ketones Enabled by PMHS: Giving Value to a Chemical Waste with Optimal Atom‐Economy

AbstractHerein, it is demonstrated that a chemical waste from the silicon industry, namely polymethylhydrosiloxane (PMHS), is a suitable hydrosilane source for the challenging, selective aerobic oxidation of olefins into methyl ketones under cobalt catalysis: a first row, abundant in the Earth's crust and cheap metal with low toxicity. The catalytic system operates under unprecedented, stoichiometric amounts of hydrosilane while the cobalt catalyst loading is kept at a very low 1 mol% with the reactions being finished in less than 1 hour with very high turnover numbers (1,340) and record‐breaking turnover frequency values up to 530 h−1. Mechanistic studies highlight the key role of the porphyrin ligand for stabilizing the active cobalt species that does follow a radical‐based reaction pathway under these particular conditions. These results are relevant for replacing the expensive and scarce palladium catalyst, traditionally used for Wacker‐type oxidations, by first‐row, Earth‐abundant transition metals under green conditions including the efficient valorization of a chemical waste such as PMHS.

I2‐Promoted sp3 C−H Oxidation/Annulation Sequences for the Synthesis of Indoloquinolines from 2‐(1H‐indol‐2‐yl)anilines and Aryl Methyl Ketones

AbstractAn iodine/DMSO‐promoted approach has been developed for the synthesis of indoloquinolines via a sequential sp3 C−H oxidation/intramolecular cyclization using 2‐(1H‐indol‐2‐yl)anilines and aryl methyl ketones. A wide range of aryl methyl ketones, including drugs and complex bioactive molecule‐derived substrates were compatible in the present reaction with yields in the range of 30–96%. This protocol proceeds through sp3 C−H oxidation of aryl methyl ketones to phenylglyoxals, subsequent imine formation, and cyclization to furnish the indoloquinolines. Further, the reaction is applicable for gram‐scale synthesis and is operationally simple.

Metagenomic and flavoromic profiling reveals the correlation between the microorganisms and volatile flavor compounds in Monascus-fermented cheese

The Monascus-fermented cheese (MC) is a unique cheese product that undergoes multi-strain fermentation, imparting it with distinct flavor qualities. To clarify the role of microorganisms in the formation of flavor in MC, this study employed SPME (arrow)-GC–MS, GC-O integrated with PLS-DA to investigate variations in cheese flavors represented by volatile flavor compounds across 90-day ripening periods. Metagenomic datasets were utilized to identify taxonomic and functional changes in the microorganisms. The results showed a total of 26 characteristic flavor compounds in MC at different ripening periods (VIP＞1, p < 0.05), including butanoic acid, hexanoic acid, butanoic acid ethyl ester, hexanoic acid butyl ester, 2-heptanone and 2-octanone. According to NR database annotation, the genera Monascus, Lactococcus, Aspergillus, Lactiplantibacillus, Staphylococcus, Flavobacterium, Bacillus, Clostridium, Meyerozyma, and Enterobacter were closely associated with flavor formation in MC. Ester compounds were linked to Monascus, Meyerozyma, Staphylococcus, Lactiplantibacillus, and Bacillus. Acid compounds were linked to Lactococcus, Lactobacillus, Staphylococcus, and Bacillus. The production of methyl ketones was closely related to the genera Monascus, Staphylococcus, Lactiplantibacillus, Lactococcus, Bacillus, and Flavobacterium. This study offers insights into the microorganisms of MC and its contribution to flavor development, thereby enriching our understanding of this fascinating dairy product.

Volatile Organic Compounds Mediate Host Selection of Wheat Midge, Sitodiplosis Mosellana (Géhin) (Diptera: Cecidomyiidae) between Preanthesis and Postanthesis Stages of Wheat.

The orange wheat blossom midge, Sitodiplosis mosellana (Géhin) (Diptera: Cecidomyiidae), is a significant wheat pest in the Prairie Provinces of Canada and northern regions of the USA. Wheat phenology plays a critical role in wheat midge oviposition. We hypothesized that S. mosellana oviposition behaviour is influenced by volatile organic compounds (VOCs) emitted by wheat at two adjacent wheat growth stages: preanthesis and postanthesis. A higher number of S. mosellana eggs laid on preanthesis than postanthesis spikes in an oviposition choice experiment using the susceptible spring wheat cultivar 'Roblin'. In preanthesis, wheat emitted higher amounts of Z-3-hexenyl acetate (Z3-06:OAc) than at the postanthesis stage. Higher amounts of methyl ketones such as 2-tridecanone, 2-pentadecanone, and 2-undecanone were emitted by wheat in the postanthesis stage and these VOCs were sensitive to S. mosellana antennae used in the Gas Chromatography-Electroantennographic Detection. Females were attracted to synthetic Z3-06:OAc but were deterred by 2-tridecanone relative to the solvent control in the vertical Y-tube olfactometer. 2-Undecanone and 2-pentadecanone did not show any attractiveness or deterrence. In a no-choice oviposition experiment, fewer eggs were laid in preanthesis wheat exposed to a synthetic VOC blend of Z3-06:OAc, 2-undecanone, 2-tridecanone, and 2-pentadecanone at the concentrations released by postanthesis spikes. This study shows that the reduction of Z3-06:OAc, in the VOC mix, and possibly the increase in 2-tridecanone, are likely responsible for the reduction in oviposition on postanthesis wheat. These results elucidate for the first time the role of specific VOCs mediating S. mosellana oviposition in preanthesis and postanthesis wheat.

The optimisation of caffeic acid reactive extraction by trioctylphosphine oxide using response surface methodology

ABSTRACT Caffeic acid is a valuable product due to its wide-ranging utilities. Currently, caffeic acid can be produced via fermentation process using native or engineered microorganisms. The reactive extraction is a prominent technique that is used for the recovery of carboxylic acids. In this work, caffeic acid was recovered by an organophosphate (trioctylphosphine oxide) from its aqueous solution in the presence of different kinds of solvents namely 1-butanol, ethyl propionate, and ethyl methyl ketone. The values of reactive extraction parameters were optimised by Box–Behnken design. 98.19% The maximum extraction efficiency was obtained as 98.19% at the optimum conditions of 0.003 mol kg−1 caffeic acid concentration, 50% (v/v) trioctylphosphine oxide quantity, and 306.2 K in the presence of 1-butanol as the solvent. Our study is the first ever to examine the reactive extraction of caffeic acid, and therefore very important in modern scientific disciplines.

Oxidized reducing ends in celluloses: Quantitative profiling relative to molar mass distribution by fluorescence labeling

Fluorescence labeling with N-(1-naphthyl)ethylenediamine is highly effective for quantifying oxidized reducing end groups (REGs) in cellulosic materials. When combined with size exclusion chromatography in DMAc/LiCl, along with fluorescence / multiple-angle laser light scattering / refractive index detection, a detailed profile of C1-oxidized REGs relative to the molecular weight distribution of the cellulosic material can be obtained. In this work, the derivatization process was extensively optimized, to be carried out heterogeneously in the solvent N-methyl-2-pyrrolidone. Furthermore, we show that to achieve high selectivity for carboxyl groups at the C1 position, keto and aldehyde groups need to be selectively reduced (e.g., by NaBH4), and carboxyl groups other than at C1 need to be blocked (e.g., by methylation with (trimethylsilyl)diazomethane) prior to fluorescence labeling of carboxyl groups at C1 position. Finally, we demonstrate the practical value of the analytical method by measuring the content of the C1-oxidized REGs in cellulose samples after chemical (by Pinnick oxidation) or enzymatic (by treatment with C1-oxidizing LPMO enzymes) oxidation of various pulp samples.

I2–DMSO‐Mediated Multicomponent [2+1+1+1] Annulation Reaction via Ethyl Nitroacetate C—NO2 Bond Cleavage as a C1 Synthon: A Route to Multisubstituted β‐Pyrrolidinones Derivatives with a Quaternary Center

Comprehensive SummaryA [2 + 1 + 1 + 1] cyclization reaction has been developed for the synthesis of multisubstituted β‐pyrrolidinones from commercially available aryl methyl ketones, primary amines, and ethyl nitroacetate. In this I2–DMSO‐meditated process, the C—NO2 bond of ethyl nitroacetate is cleaved, affording a C1 synthon, and the formation of two C—C and two C—N bonds and a quaternary carbon center are constructed in one pot. This method has good substrate compatibility and permits the late‐stage modification of pharmaceutical compounds.

Impact of Peripheral Hydrogen Bond on Electronic Properties of the Primary Acceptor Chlorophyll in the Reaction Center of Photosystem I.

Photosystem I (PS I) is a photosynthetic pigment-protein complex that absorbs light and uses the absorbed energy to initiate electron transfer. Electron transfer has been shown to occur concurrently along two (A- and B-) branches of reaction center (RC) cofactors. The electron transfer chain originates from a special pair of chlorophyll a molecules (P700), followed by two chlorophylls and one phylloquinone in each branch (denoted as A-1, A0, A1, respectively), converging in a single iron-sulfur complex Fx. While there is a consensus that the ultimate electron donor-acceptor pair is P700+A0-, the involvement of A-1 in electron transfer, as well as the mechanism of the very first step in the charge separation sequence, has been under debate. To resolve this question, multiple groups have targeted electron transfer cofactors by site-directed mutations. In this work, the peripheral hydrogen bonds to keto groups of A0 chlorophylls have been disrupted by mutagenesis. Four mutants were generated: PsaA-Y692F; PsaB-Y667F; PsaB-Y667A; and a double mutant PsaA-Y692F/PsaB-Y667F. Contrary to expectations, but in agreement with density functional theory modeling, the removal of the hydrogen bond by Tyr → Phe substitution was found to have a negligible effect on redox potentials and optical absorption spectra of respective chlorophylls. In contrast, Tyr → Ala substitution was shown to have a fatal effect on the PS I function. It is thus inferred that PsaA-Y692 and PsaB-Y667 residues have primarily structural significance, and their ability to coordinate respective chlorophylls in electron transfer via hydrogen bond plays a minor role.

Deacylative arylation and alkynylation of unstrained ketones.

Ketones are ubiquitous in bioactive natural products, pharmaceuticals, chemical feedstocks, and synthetic intermediates. Hence, deacylative coupling reactions enable the versatile elaboration of a plethora of chemicals to access complex drug candidates and natural products. Here, we present deacylative arylation and alkynylation strategies for the synthesis of a wide range of alkyl-tethered arenes and alkynes from cyclic ketones and methyl ketones under dual nickel/photoredox catalysis. This reaction begins by generating a pre-aromatic intermediate (PAI) through the condensation of the ketone and N'-methylpicolino-hydrazonamide (MPHA), followed by the oxidative cleavage of the PAI α-C─C bond to form an alkyl radical, which is subsequently intercepted by a Ni complex, facilitating the formation of diverse C(sp3)-C(sp2)/C(sp) bonds with remarkable generality. This protocol features a one-pot reaction capability, high regioselectivity and ring-opening efficiency, mild reaction conditions, and a broad substrate scope with excellent functional group compatibility.

I2 Catalyzed and TBHP/Ammonium-Promoted Conversion of Arylethanone to Nitriles via β-Scission of Iminyl Radicals.

Herein, we report a general I2-catalyzed and TBHP/ammonium-promoted conversion of arylethanone to aromatic nitriles under air. This procedure proceeded with the β-scission of iminyl radical, which was facilitated via quenching the released alkyl radical by tert-butyl peroxyl radical leading to peroxide followed with Kornblum-DeLaMare rearrangement. A series of aryl methyl ketone and alkyl aryl ketone worked well with good functional group tolerance in high yields. As such, this metal-free procedure represents a facile, safe, green, and practical procedure in conversion of arylethanone to aromatic nitriles.

Synthesis of Functionalized Organosilicon Compounds/Distal Ketones via Ring-Opening Giese Addition of Cycloalkanols under Organophotocatalytic Conditions.

Visible-light-induced organophotocatalyzed ring-opening followed by remote Giese addition of tertiary cycloalkanols with β-silylmethylene malonates has been developed under mild reaction conditions for the synthesis of organosilicon compounds, bearing a ketone group distally substituted with a silyl group with an additional dialkyl malonate functional handle in moderate to good yields (34-72%). The protocol also worked well with diverse Michael acceptors, such as alkylidene/benzylidene malonates, trifluoro methylidene malonate, benzylidene malononitrile, α-cyano-enone, and α-cyano vinyl sulfone, and delivered desired valuable distally functionalized ketones. To showcase the potential of the method, various synthetic transformations of the obtained product were also demonstrated.

Aggregation-Induced Modulation of Ground and Excited State Photophysics of 5-(tert-Butyl)-2-Hydroxy-1,3-Isophthalaldehyde (5-tBHI).

5-(tert-Butyl)-2-hydroxy-1,3-isophthalaldehyde (5-tBHI) is a photochromic material susceptible to either excited state proton transfer or excited state intramolecular proton transfer, depending upon the solvent. However, it has also been found to aggregate in the presence of sodium dodecyl sulfate. In this current study, based on the steady-state and time-resolved spectroscopy, supported by crystallography, quantum chemical density functional theory calculation, and molecular dynamics (MD) simulation, we report on the aggregation of this potential single benzene-based emitter (SBBE) in neat solvents as well as solid phase to modulate its photophysics. It has been found that 5-tBHI forms mixed aggregates of different orders, owing to the presence of both enolic and tautomeric forms, to yield tunable emission, although the emission intensity is quenched. These findings suggest that the intramolecular hydrogen bonding of 5-tBHI not only limits intermolecular interactions but also promotes nonradiative deactivation pathways. Hence, designing and structural engineering, with a focus to suppressing intramolecular hydrogen bonding as well as increasing through space conjugation by replacing the aldehydic moieties with bulky aliphatic or aromatic ketonic groups, can be a plausible approach to yielding improved probes with tunable emission and higher fluorescence quantum yields.