5G Systems Research Articles

Key Issues on Integrating 5G into Industrial Systems

Under the auspice of further developing 5G mobile communication technology and integrating it with the latest advancements in the field of Industrial Internet-of-Things, this study conducts in-depth research and detailed analysis on the combination of 5G with industrial systems based on composite structures, communication network architectures, wireless application scenarios, and communication protocols. The status quo, development trend, and necessity of 5G mobile communication technology are explored and its potential in industrial applications is analyzed. Based on the current practical development level of 5G technology, by considering different requirements for bandwidth, real-time performance, and reliability in communication networks of industrial systems, this study proposes three feasible paths for the integration between 5G and industrial systems, including the method to use 5G in place of field buses. Finally, by introducing real-world cases, this study has successfully demonstrated the integration of 5G and industrial systems by extending 5G terminals as field bus gateways. This study provides valuable references for research and practice in related fields.

A high-selective multiple-mode bandpass filter design, applicating in both millimeter-wave 5G and WiFi systems

This paper proposes a millimeter-wave bandpass filter (BPF) with high selectivity, which can be applied in both 5G and WiFi systems. Two dual-mode resonators (DMRs) are adopted and analyzed coupled microstrip lines (CMLs) and can form six transmission poles (TPs) and four transmission zeros (TZs). Furthermore, a multiple-mode resonator (MMR) is presented based on the DMRs to realize a high selective passband. Additionally, five extra TZs are introduced by two pairs of open-circuited stubs and transversal signal interference (TSI), which are introduced by cross-coupling of two signal paths. These TZs significantly enhance out-of-band suppression performance. The proposed BPF is fabricated in ceramic process, and measurement results demonstrate a minimum insertion loss of −1.52 dB, a 3-dB passband from 38.3 to 48.2 GHz, a 30-dB rectangular coefficient of 1.21, and a 30-dB stopband extending to the test limit of 67 GHz.

An architecture for control plane slicing in beyond 5G networks

To accommodate various use cases with differing characteristics, the Fifth Generation (5G) mobile communications system intends to utilize network slicing. Network slicing enables the creation of multiple logical networks over a shared physical network infrastructure. While the problems such as resource allocation for multiple slices in mobile networks have been explored in considerable detail in the existing literature, the suitability of the existing mobile network architecture to support network slicing has not been analysed adequately. We think the existing 5G System (5GS) architecture suffers from certain limitations, such as a lack of slice isolation in its control plane. This work focuses on the future evolution of the Third Generation Partnership Project (3GPP) 5GS architecture from a slicing perspective, especially that of its control plane, addressing some of the limitations of the 3GPP 5GS architecture. We propose a new network architecture which enables efficient slicing in beyond 5G networks. The proposed architecture results in enhanced modularity and scalability of the control plane in sliced mobile networks. In addition, it also brings slice isolation to the control plane, which is not feasible in the existing 5G system. We also present a performance evaluation that confirms the improved performance and scalability of the proposed system viz-a-viz the existing 5G system.

Laser-assisted screen-printing of graphene folded reflectarray antenna for millimeter-wave applications

Antennas operating at high frequency bands are sought after for applications in 5G, satellite, radar, and other communication systems. Graphene, a two-dimensional material known for its exceptional conductivity, mechanical strength, and chemical stability, is anticipated to serve as a viable substitute for copper in antenna applications. However, researches on graphene antennas at millimeter-wave and higher frequencies are mainly limited to theory and simulation, due to the fabrication challenges of achieving high-precision graphene patterns. Herein, we present the design and fabrication of a graphene folded reflectarray antenna (FRA) operating at millimeter-wave. The FRA is fabricated using screen-printing of graphene ink on an RT5880 substrate, followed by laser engraving for precise patterning. The main reflector has 918 patch units, and the polarizing grids have line widths and spacings of 100 μm. Measurements demonstrate that the antenna has a realized peak gain of 21.37 dBi at 37.5 GHz. The radiation patterns show a 3 dB beamwidth of 6° and 4° in the E-plane and H-plane respectively, with cross-polarization more than −18 dB. The laser-assisted screen-printing method provides a feasible strategy for the precision manufacture of graphene communication devices.

An Analytical Reliability Performance Assessment of Cell-Free Massive MIMO Systems for 5G and Beyond Cellular Networks

In today‟s realm, the 5G cellular networks offer a new era of fully digital environment by connecting people anywhere anytime. This era requires inspiring demands to the networks in terms of spectral and energy efficiencies, low-latency and ultra-reliable communications. A major development to deal with these unparalleled demands is the introduction of Cell- Free Massive MIMO (CF mMIMO) systems to the cellular network. In recent years, mathematical foundations have been laid for a CF mMIMO communication system to evaluate the spectral and energy efficiencies given the number of access points. Various existing literatures have adopted mathematical models to formulate closed-form expressions for these efficiencies using uncorrelated Rayleigh fading for simple linear processing detectors. In this paper, we try to address a compelling and interesting question which has not received much attention lately. The question is how to evaluate the reliability of a connected user terminal in both a CF mMIMO and conventional mMIMO system? We answer this question by first analyzing the signal models for both systems assuming exact channel estimates and consider an uncorrelated Rayleigh fading channel model. The exact Bit Error Rate, as a reliability assessment, in closed-form are then derived based on strong mathematical foundations, which are simple to numerically evaluate in Matlab R2022, for MPSK and MQAM modulation schemes. The mathematical models presented in this work can be used in 5G and Beyond 5G networks to evaluate the distributions of error rates for a user given the number of Access points or Base Station antennas and modulation scheme. Machine Learning algorithms can be applied to the analytical expressions with a view to predict the error performance of a user terminal given the fading characteristic of the propagation environmen

Battery Lifetime and Power Consumption in 5G Systems With Intra- and Inter-RAT Dual-Connectivity

Battery Lifetime and Power Consumption in 5G Systems With Intra- and Inter-RAT Dual-Connectivity

Electrically Small Antenna for Sensing Application: A Review

Abstract: This study focuses on the electrically small antennas (ESAs) tailored for sensing applications. Recognizing the critical role of antenna size and performance in modern sensing systems, the research employs advanced simulation and optimization techniques to explore various configurations. Additionally, discussions on potential enhancements, such as meta material, Dielectric resonating antenna, meander line antenna, etc. integration and reconfigurable structures, provide insights for future developments in compact antenna technology for wireless sensing systems. Thus, in In this paper, a comprehensive overview of various types of electrically small antennas (ESAs) is presented, along with their significance in enhancing performance and their application in 5G and 6G communication systems.

Simulation and Analysis of the Code Domain NOMA with UFMC for 5G Wireless Networks

In fifth generation (5G) wireless networks, radio access techniques and multi-carrier waveforms play a vital role in meeting the diversified demands of ultra-low latency, massive connectivity, and higher throughput. Multi-access schemes used conventionally in 4G system was Orthogonal Multiple Access (OMA) technique. The OMA techniques suffer from inefficient spectrum utilization, high latency, and supports a limited number of users. Next-generation networks, Non-Orthogonal Multiple Access (NOMA), has a great potential, in which multiple users are simultaneously served using the same time, frequency, or code resource increasing the throughput. Code domain-NOMA (CD-NOMA) is the key technique implemented in the system design where multiple users are distinguished based on unique user-specific spreading codes. The NOMA system could significantly benefit from Universal Filtered Multi-Carrier (UFMC) modulation waveform in terms of flexibility, spectral efficiency, compatibility with Multiple Input Multiple Output (MIMO) technique, and relaxed synchronization requirements. The novel integrated system proposed in the paper is CD-NOMA-UFMC with convolutional codes. The major outcome of the paper is that the combination of UFMC air interface modulation technique with CD-NOMA access method can be the most effective way to meet the growing demands of 5G.

5G interference with aviation altimeters: technology and policy recommendations for coexistence

The fifth generation (5G) cellular network roll-out provides high-speed performance, better coverage, and ubiquitous connectivity for the next-generation of intelligent communication systems. Compared to earlier versions, the new 5G wireless standard operates across a wider range of frequencies, which has raised aviation industry's concerns regarding safety and compatibility. For example, 5G systems operating with frequencies that are adjacent those used by radio altimeters could disrupt flight operations and navigation functions. This paper provides an overview of current research efforts assessing the 5G interference and its potential operational impact on altimeters. The work discusses the current stance of regulators and telecommunications operators worldwide on potential 5G interference with altimeters. The paper also compares the ongoing public consultations with key stakeholders globally regarding cellular systems' interference with altimeters. This work offers technical and policy recommendations to spectrum regulators and aviation authorities to inform the safe and efficient deployment of 5G spectra. This work identifies long-term solutions for achieving maximum 5G bands usability and ensuring compatibility among cellular technologies and aviation systems.

Analysis and emulation of proposed testbed for OFDMA 4G and 5G cellular networks

AbstractIn order to investigate and analyze the behavior of 4G and 5G OFDMA cellular networks in real time, it is essential to have a real‐time testbed to emulate these cellular networks. We developed the experimental testbed in this work and proposed a real‐time approach to emulating these networks. We take real‐time measurements in indoor and outdoor environments. From the results, we say the proposed testbed can be used to identify the activity of spectrum occupancy of 4G and 5G cellular systems within a specified time, and one can also test their algorithm, protocols, and solutions using our developed testbed.

Securing the Next Wave: A Comprehensive Review of 5G System Security

Securing the Next Wave: A Comprehensive Review of 5G System Security

Resource-Efficient Multicast URLLC Service in 5G Systems.

Many emerging applications, such as factory automation, electric power distribution, and intelligent transportation systems, require multicast Ultra-Reliable Low-Latency Communications (mURLLC). Since 3GPP Release 17, 5G systems natively support multicast functionality, including multicast Hybrid Automatic Repeat Request and various feedback schemes. Although these features can be promising for mURLLC, the specifications and existing studies fall short in offering guidance on their efficient usage. This paper presents the first comprehensive system-level evaluation of mURLLC, leveraging insights from 3GPP specifications. It points out (i) how mURLLC differs from traditional multicast broadband wireless communications, and (ii) which approaches to provide mURLLC require changing the paradigm compared with the existing solutions. Finally, the paper provides recommendations on how to satisfy strict mURLLC requirements efficiently, i.e., with low channel resource consumption, which increases the capacity of 5G systems for mURLLC. Simulation results show that proper configuration of multicast mechanisms and the corresponding algorithms for mURLLC traffic can reduce resource consumption up to three times compared to the baseline solutions proposed for broadband multicast traffic, which significantly increases the system capacity.

Compact quad element dual band high gain MIMO rectangular dielectric resonators antenna for 5G millimeter wave application

In this article, a compact dual-band quad-port Multiple Input Multiple Output (MIMO) Rectangular Dielectric Resonator Antenna (RDRA) with a defected connected ground Geometry (DCGG) for 5G millimeter-wave (mm-wave) application is presented. The antenna is operating at 24 GHz to 32 GHz frequency range. The antenna configuration comprises four identical rectangular microstrip radiators mounted on an RT Duroid 5880 substrate (20 × 20 × 0.254) mm3. To enhance bandwidth, each radiator is equipped with both rectangular and circular-shaped ring slots. To improve the performance of the 4 port MIMO antenna, RDRAs are placed over each radiator and optimized. The MIMO RDRs exhibit dual-band with 4.24 GHz and 0.46 GHz bandwidths. The MIMO RDRA achieves exceptional isolation (>27 dB), high gain (8.24 dB), and more than 94 % radiation efficiency. The diversity parameters exhibit a low Envelope Correlation Coefficient (ECC) of 0.0006, and a high Diversity Gain (DG) of 9.97 dB is achieved, highlighting the effectiveness of the antenna system in providing diversity reception and improving communication reliability in challenging environments. Hence, the proposed MIMO antenna is compact, making it suitable for integration into small 5G devices or systems where space is limited, such as IoT devices, mobile phones, or small base stations at mm-wave frequency bands.

5G QoS model for Time-Sensitive Networking

Abstract Flexible production processes and applications for Industry 4.0 expect a seamless, deterministic communication over scalable infrastructure networks that rely on a combination of wired and wireless technologies. Time-Sensitive Networking (TSN) and 5G are considered key technologies to meet the communication requirements of Industry 4.0. To integrate 5G into TSN, the 3rd Generation Partnership Project (3GPP) specified the 5G system (5GS) as Ethernet bridge, to exchange time synchronization and Quality of Service (QoS) requirement information between wired TSN entities and 5GS. QoS mapping between TSN and 5G is non-trivial and requires a deeper analysis of relevant parameters and QoS processing. In this paper, different solution approaches for QoS mapping between TSN and 5G are presented and discussed. The contribution covers fundamentals and prerequisites on the way to a 5G QoS model for TSN, which has not yet been addressed in 3GPP nor IEEE.

A Multifunctionality Reconfigurable HMSIW Filter by Using EBG Structure and Diodes for C/X-Band Application

This letter presents a multifunctionality reconfigurable substrate-integrated waveguide (SIW) filter embedded in a microstrip line. The proposed filter used an electromagnetic bandgap structure (EBG) to compact the size and improve the electromagnetic features. The SIW filter consists of a three-cell EBG with metallic circular-shaped connected to the ground through cylindrical vias. Firstly, the base SIW structure offers a wide passband filtering response, and then, to obtain selective passband, wide band rejection, and controllable resonance frequencies, a three-cell EBG along with four diodes has been attached. The filter is designed and printed on a Rogers 4003 substrate with a thickness of 1 mm and is experimentally validated for functionalities operated at three modes with an average 3 dB bandwidth of 115 MHz in each frequency. In addition to that, two transmission zeros (TZ) have been produced in the upper band frequency. The filter’s response is also tunable by turning the diode off or on and changing the main parameters of EBG, the gab, and the position between cells. The study explores resonance frequency alterations in a three-state system of on/off. By eliminating or diminishing specific modes, and incorporating diodes, distinct resonance behaviors are observed. Moreover, shifting frequency resonance in a multiparameter system has been investigated. Increasing B1 induces a significant shift to lower values, while an increase in D1 leads to a decrease in the first and second resonance frequencies and an upward shift in the third. The designed filter has been fabricated and tested to compare and confirm simulated responses. Simulation and measurement results are in good agreement. The S-parameters of measured results gained a good response (>15 dB) within the passbands and stopbands and an insertion loss of 1.5 dB suitable for 5G and Wi-Fi systems.

Analysis of Requirements, Needs and Challenges Affecting the Development of the 6G Network

With the development and implementation of the 5G systems worldwide, the shortages and imperfections that limit the functions and services of 5G networks were made apparent. This generation should enable its users to access unseen services and applications and a better quality of service in comparison to its predecessors. However, aside from the apparent importance of 6G networks, the possibilities, use cases, applications, and services that this technology would provide are yet to be explored. Our intention with this paper is to research the papers and compare the differences in requirements, capabilities, services, and use cases between 5G and 6G.

Security Concerns of IoT Against DDoS in 5G Systems

The Internet of Things (IoT), which enables seamless connectivity and communication between gadgets and the internet has completely changed how people interact with and use technology in 5G. Distributed Denial of Service (DDoS) assaults are now recognized as a serious security concern because of the rapid expansion of IoT devices, which has also brought about new security issues. DDoS attacks plan massive, coordinated attacks that overwhelm target systems and impair their functions by taking advantage of the interconnectedness of IoT devices. This paper explores the vulnerabilities in IoT devices and their possible exploitation by hostile actors, providing an in-depth examination of IoT and DDoS assault dynamics in 5G. The report emphasizes the need for preventative security measures by highlighting the growing size and complexity of DDoS attacks employing compromised IoT botnets. The examination of various DDoS attack channels and methodologies against IoT devices sheds light on the growing strategies used by attackers to infiltrate and manage IoT botnets. To emphasize how urgent it is to mitigate such risks, the effects of DDoS assaults on vital infrastructures, companies, and end-users are also emphasized. The paper also evaluates current mitigation techniques and security safeguards intended to counter IoT-based DDoS attacks. These include the use of security in Nexus that prioritize device authentication, encryption, and secure communication protocols as well as network traffic filtering and anomaly detection. Relevant case studies and real-world examples are provided to give readers a thorough understanding of the topic while demonstrating the scope and effects of recent IoT-based DDoS attacks. The paper guides different approaches through which DDOS can harm the server/ system (or anything, which is belonging to the family of the Internet of things) through different types; DDOS can be minimized but impossible to overcome. In this paper, we also have proved that due to IOT, the ratio of DDOS has increased by implementing these measures and continuously monitoring the network for potential threats. 5G systems can enhance their security posture and provide a safer and more reliable communication infrastructure for users and businesses by mitigating DDoS.

IncepSeqNet: Advancing Signal Classification with Multi-Shape Augmentation (Student Abstract)

This work proposes and analyzes IncepSeqNet which is a new model combining the Inception Module with the innovative Multi-Shape Augmentation technique. IncepSeqNet excels in feature extraction from sequence signal data consisting of a number of complex numbers to achieve superior classification accuracy across various SNR(Signal-to-Noise Ratio) environments. Experimental results demonstrate IncepSeqNet’s outperformance of existing models, particularly at low SNR levels. Furthermore, we have confirmed its applicability in practical 5G systems by using real-world signal data.

Authentication in a Hyperconnected World: Challenges, Opportunities and Approaches

Authentication and integrity are the prerequisites for trustworthy and secure communication. Without unambiguous knowledge of who is being interacted with, no confidential content can be exchanged, no (remote) access to systems and equipment can be granted, and no trust can be established. This situation is further exacerbated by an increasing interconnection and globalization towards a hyperconnected world. (Communication) Participants are no longer necessarily in close physical and social proximity and do not need to know each other, but can have their source/destination anywhere in the world.
 An authentication process is used to verify that someone -whether human or machine-, is in fact who she claims to be: The process thus includes a validation step to evaluate an assertion. However, systems differ in terms of their requirements, for instance with regard to the authentication options available, the time period required for re-authentication and the frequency of re-authentication, as well as the level of security to be achieved with authentication. The latter particularly with regard to the cost/benefit ratio of the application. Additionally, there are efforts to finally abolish traditional passwords, passphrases and pin codes and render them obsolete.
 In this work, technologies and methods for authentication beyond passwords and trustworthy authentication will be examined, particularly with regard to future communication infrastructures such as Beyond 5G and Sixth Generation (6G) wireless systems. Thereby, the impact of Artificial Intelligence (AI) methods, but also the relevance to Quantum Key Distribution (QKD) and Post Quantum Cryptography, as well as the use of 6G-enabling technologies like Reconfigurable Intelligent Surfaces (RISs), Wireless Optical Communication (WOC) and Physical Layer Security (PhySec), for example as additional factors of a multi-factor authentication process, will be considered, along with Body Area Networks (BANs) and the integration of the human body relying on biometrics. The various concepts are compared with regard to their requirements, limitations and possible applications in order to provide the user with an orientation as to which authentication method is conceivable and useful in which specific scenarios.

Coherence Bandwidth of Rice Channels for Millimeter Wave and Sub-Terahertz Applications

6G research in the millimeter wave and sub-Terahertz domain is targeting very wideband systems with significantly higher data throughput than for 5G systems. Multipath propagation under shadowing conditions is affecting radio propagation, where multipath propagation results in frequency-selective fading, which is characterized by the coherence bandwidth and the time variation by the coherence time. In these frequency ranges shadowing can be overcome by additional means in the network deployment such as reflectors, RIS arrays or repeaters, which provide at the receiver a channel impulse response with a strong component (Rice type channel). Coherence bandwidth and coherence time are well-known for Rayleigh channels. However, both parameters for Rice channels versus the Rice factor K′ are not available. This paper is investigating the coherence bandwidth and time for Rice channels based on an approximative approach for the fading statistics. With the proposed correlation criterion, the coherence bandwidth and time tend to infinity from a Rice factor around K′≥4=ˆ6 dB. These relations are provided by approximative functions for K′≥0 starting at the Rayleigh channel.