2D Nuclear Magnetic Resonance Spectroscopy Research Articles

CHEMICAL CONSTITUENTS OF Amburana acreana Ducke A. C. Sm. LEAVES

This study aimed to isolate, purify and characterize secondary metabolites present in Amburana acreana leaves, native to the state of Rondônia, using classical chromatographic methods and 1D, 2D nuclear magnetic resonance spectroscopy. From the hydroethanolic leaves extract of A. acreana, p-hydroxybenzoic acid, vanillic acid, coumarin, campesterol 3-β-D-glucoside and amburoside B, all known compounds, were identified. To the best of our knowledge, this is the first report of isolation and chemical characterization of secondary metabolites in A. acreana. In addition, in vitro assays indicated that amburoside B does not have inhibitory potential on the growth of gram-negative bacteria. The presence of these compounds suggests that, thus far, amburosides (A and B) could be chemotaxonomic markers of the genus Amburana.

Bioassay-guided isolation and in Silico characterization of cytotoxic compounds from Hemimycale sp. Sponge targeting A549 lung cancer cells

Bioassay-guided fractionation approach led to identification of two novel compounds; (4-(hydroxymethyl)-3-methoxy-1H-pyrazol (1) and mycalene (2), alongside with four known metabolites; octadecane (3), hexatriacontane (4), 1-heneicosanol (5) and heptatriacontanoic acid (6) from the Red Sea marine sponge Hemimycale sp. The ethyl acetate fraction showed a noticeable cytotoxic activity against the lung cancer cell line (A549) with IC50 value of 75.54 µg/ mL. Structural elucidation was achieved using a combination of 1D and 2D nuclear magnetic resonance (NMR) spectroscopy and high-resolution electrospray ionization-mass spectrometry (HR-ESI-MS). To elucidate the potential mechanism of action behind the cytotoxic effects against lung cancer, a multi-faceted approach combining in silico network pharmacology, experimental validation, and molecular docking studies were employed. Both compounds, designated as 1 and 2, demonstrated significant binding affinities to predicted target proteins, with docking scores of -4.789 and − 4.421 kcal/mol, respectively. These results lay the groundwork for further investigation into the therapeutic potential of these novel compounds from Hemimycale sp. as promising candidates for lung cancer treatment.

Mapping Natural Sugars Metabolism in Acute Myeloid Leukaemia Using 2D Nuclear Magnetic Resonance Spectroscopy.

Metabolism plays a central role in cancer progression. Rewiring glucose metabolism is essential for fulfilling the high energy and biosynthetic demands as well as for the development of drug resistance. Nevertheless, the role of other diet-abundant natural sugars is not fully understood. In this study, we performed a comprehensive 2D NMR spectroscopy tracer-based assay with a panel of 13C-labelled sugars (glucose, fructose, galactose, mannose and xylose). We assigned over 100 NMR signals from metabolites derived from each sugar and mapped them to metabolic pathways, uncovering two novel findings. First, we demonstrated that mannose has a semi-identical metabolic profile to that of glucose with similar label incorporation patterns. Second, next to the known role of fructose in driving one-carbon metabolism, we explained the equally important contribution of galactose to this pathway. Interestingly, we demonstrated that cells growing with either fructose or galactose became less sensitive to certain one-carbon metabolism inhibitors such as 5-Flurouracil and SHIN1. In summary, this study presents the differential metabolism of natural sugars, demonstrating that mannose has a comparable profile to that of glucose. Conversely, galactose and fructose contribute to a greater extent to one-carbon metabolism, which makes them important modulators for inhibitors targeting this pathway. To our knowledge, this is the first NMR study to comprehensively investigate the metabolism of key natural sugars in AML and cancer.

Isolation and Characterization of Stigmasterol from Psidium guajava Leaves: A Promising Bioactive Compound with Therapeutic Potential

This study aimed to isolate and characterize bioactive compounds from the leaves of Psidium guajava Linn. The hydroethanolic extract yielded 32% (80 g) from the crude material, which was subjected to column chromatography for fractionation. Structural elucidation of the isolated compound was performed using 1D and 2D Nuclear Magnetic Resonance (NMR) spectroscopy, including COSY, HSQC, and HMBC experiments. The spectral data confirmed the presence of stigmasterol, characterized by its distinct chemical shifts and long-range correlations between carbon and proton atoms. Stigmasterol was isolated as a white, crystalline solid and identified by its unique physio-chemical properties, such as solubility in organic solvents, a melting point of 163-164°C, and molecular formula C29H48O. This compound is known for its significant biological activities, including antibacterial, antimalarial, anti-inflammatory, antioxidant, and anticancer effects. By employing advanced techniques like 1D and 2D NMR spectroscopy, the study provides precise structural elucidation of stigmasterol, contributing to natural product research and reinforcing the medicinal potential of guava leaves as a source of pharmacologically active compounds. This adds to the existing knowledge of the plant’s bioactive components and their applications in medicinal chemistry

Multi-site esterification: a tunable, reversible strategy to tailor therapeutic peptides for delivery.

Peptides are naturally potent and selective therapeutics with massive potential; however, low cell membrane permeability limits their clinical implementation, particularly for hydrophilic, anionic peptides with intracellular targets. To overcome this limitation, esterification of anionic carboxylic acids on therapeutic peptides can simultaneously increase hydrophobicity and net charge to facilitate cell internalization, whereafter installed esters can be cleaved hydrolytically to restore activity. To date, however, most esterified therapeutics contain either a single esterification site or multiple esters randomly incorporated on multiple sites. This investigation provides molecular engineering insight into how the number and position of esters installed onto the therapeutic peptide α carboxyl terminus 11 (αCT11, RPRPDDLEI) with 4 esterification sites affect hydrophobicity and the hydrolysis process that reverts the peptide to its original form. After installing methyl esters onto αCT11 using Fischer esterification, we isolated 5 distinct products and used 2D nuclear magnetic resonance spectroscopy, reverse-phase high performance liquid chromatography, and mass spectrometry to determine which residues were esterified in each and the resulting increase in hydrophobicity. We found esterifying the C-terminal isoleucine to impart the largest increase in hydrophobicity. Monitoring ester hydrolysis showed the C-terminal isoleucine ester to be the most hydrolytically stable, followed by the glutamic acid, whereas esters on aspartic acids hydrolyze rapidly. LC-MS revealed the formation of transient intramolecular aspartimides prior to hydrolysis to carboxylic acids. In vitro proof-of-concept experiments showed esterifying αCT11 to increase cell migration into a scratch, highlighting the potential of multi-site esterification as a tunable, reversible strategy to enable the delivery of therapeutic peptides.

In situ self-assembly of artesunate-β-cyclodextrin supramolecular nanomedicine as potential anti-cancer prodrug

Supramolecular nanomedicines have drawn great interest in cancer therapy, but their potential immunotoxicities restrict application in clinical translation. Herein, we constructed a supramolecular nanomedicine CD-Artesunate (CD-ATS) in situ by supramolecular polymerization and orthogonal self-assembly. The nanostructure was meticulously characterized using 1D and 2D Nuclear Magnetic Resonance (NMR) spectroscopy, Mass spectrometry, Transmission Electron Microscopy (TEM), and particle size distribution analysis. β-cyclodextrin (β-CD) hosts are conjugated with artesunate (ATS) by click chemistry to improve the solubility and antitumor activity of ATS. Supramolecular nanomedicine was prepared through orthogonal self-assembly driven by host−guest complexation and hydrogen bonds. The results showed that the aqueous solubility of CD-ATS was 30 times better than that of free ATS. Furthermore, CD-ATS displayed a superior antitumor effect against HCT116 tumor cells compared to the first-line drug Taxol. This enhanced effect was attributed to the induction of excessive reactive oxygen species (ROS) generation, which subsequently triggered apoptosis.

Arcopilins: A New Family of Staphylococcus aureus Biofilm Disruptors from the Soil Fungus Arcopilus navicularis.

Biofilms represent a key challenge in the treatment of microbial infections; for instance, Staphylococcus aureus causes chronic or fatal infections by forming biofilms on medical devices. Herein, the fungus Arcopilus navicularis was found to produce a novel family of PKS-NRPS metabolites that are able to disrupt preformed biofilms of S. aureus. Arcopilins A-F (1-6), tetramic acids, and arcopilin G (7), a 2-pyridone, were elucidated using HR-ESI-MS and one-dimensional (1D) and two-dimensional (2D) nuclear magnetic resonance (NMR) spectroscopy. Their absolute configuration was established by the synthesis of MPTA-esters for 2, analysis of 1H-1H coupling constants, and ROESY correlations, along with comparison with the crystal structure of 7. Arcopilin A (1) not only effectively disrupts preformed biofilms of S. aureus but also potentiates the activity of gentamicin and vancomycin up to 115- and 31-fold times, respectively. Our findings demonstrate the potential application of arcopilins for the conjugated treatment of infections caused by S. aureus with antibiotics unable to disrupt preformed biofilms.

Cross-linking impacts the physical properties of mycelium leather alternatives by targeting hydroxyl groups of polysaccharides and amino groups of proteins

Cross-linking, also called tanning, improves mechanical properties of leather and also increases its enzymatic and thermal stability. As a final product, leather has an ultimate tensile strength (σ) of 8–25 MPa and an elongation at break (ε) of >30 %. Mycelium-based materials are a sustainable alternative to leather. Here, the effect of cross-linkers was assessed on mechanical properties of Schizophyllum commune mycelium sheets. To this end, glutaraldehyde and N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) were used as well as extracts of Ligustrum vulgare leaves, and bark of Acacia mearnsii and Caesalpinia spinosa. Untanned sheets had a σ of 7.8 MPa and an ε of 15.2 %, while the best overall combination of strength and elasticity was obtained with 0.1 % glutaraldehyde with a σ of 11.1 MPa and an ε of 14.6 %. Cross-linking also increased enzymatic stability and reduced mycelial water absorption but did not result in increased thermal stability. Fourier transform infrared spectroscopy (FTIR), 1D nuclear magnetic resonance spectroscopy (NMR), and amino acid analysis showed that glutaraldehyde bound both protein amino groups and polysaccharide hydroxyl groups by forming Schiff bases and acetals, respectively. Together, synthetic and vegetable cross-linkers can be used to obtain mycelium materials with leather-like tensile strength.

A novel non-aqueous tertiary amine system for low energy CO2 capture developed via molecular dynamics simulation

The current technology for capturing CO2 using alkanolamine aqueous solutions is known for its high energy and capital costs. As a result, developing new absorbents for low-energy CO2 removal remains a challenge. An additional activator can promote CO2 absorption performance. However, it is based on experimental screening. In this study, based on molecular dynamic simulation, we have successfully developed a novel and energy-efficient CO2 absorbent by combining N, N-Dimethylethanolamine (DMEA), and ethylene glycol (EG), with different activators, including ethanolamine (MEA), ethylenediamine (EDA), and piperazine (PZ). The addition of these activators significantly enhances the CO2 absorption performance of DMEA-based absorbents. Among them, DMEA-PZ-EG exhibits the maximum CO2 absorption rate and capacity, achieving 6.35 (g-CO2/(kg-soln.·min.)) and 96.5 (g-CO2/kg-soln.), respectively, representing a 230.1 % and 206.35 % improvement over 2M DMEA-EG absorbent. Moreover, compared to a 30 wt% MEA solution, the energy consumption of DMEA-based absorbents is reduced by 33.93–51.56 %. The reaction products were characterized using various spectroscopic techniques, including Attenuated Total Reflectance Fourier Transform Infrared spectroscopy (ATR-FTIR), and 1D and 2D Nuclear Magnetic Resonance spectroscopy (1H and 13C NMR). The NMR results confirmed that DMEA becomes protonated after CO2 absorption in the DMEA-EG mixture. The deprotonation of EG promote its reaction with CO2, resulting in the forming of EG carbonates. This assumption has been confirmed by the IR spectrum. Furthermore, the effect of activators on CO2 absorption has been analysed at the molecular level through molecular dynamics simulation and a new method is proposed to predict the CO2 absorption performance of non-aqueous solvents. Using non-aqueous DMEA absorbents presents a promising approach for improving CO2 capture efficiency, reducing energy consumption, and facilitating regeneration.

New insights into kinetics and mechanisms of acid sulphite delignification of Eucalyptus globulus wood

The kinetics of Eucalyptus globulus wood delignification in Mg-base acid sulphite pulping of dissolving pulp was studied using a pilot-scale batch digester simulating the industrial process. The behavior of lignin during impregnation, heating-up and bulk delignification at the final temperature was evaluated by the analysis of acid-insoluble lignin in wood and wood residue after pulping. The dynamics of lignin dissolution was followed by its structural analysis in solid residues and in solution by wet chemistry and 1D and 2D nuclear magnetic resonance (NMR) spectroscopy. About 30 % and 20 % of the lignin were removed in the impregnation and heating-up pulping steps, respectively. About 45 % of the lignin was removed at the final pulping temperature in bulk and 3 % in the residual delignification stages. The kinetics of bulk delignification followed a pseudo-first-order kinetics with an effective activation energy of 138.4 kJ/mol in the temperature range of 140–148 °C. Bulk delignification follows an undefined overall order in the hydrogen and bisulfite ions and depended on the partial pressure of SO2 at ca. 0.60 order within the range of combined SO2 in pulping acid of 1.14–1.66 % and total SO2 loads of 6.2–7.0 %. Minimum degree of lignin sulphonation to be dissolved in the pulping liquor was suggested to be about 0.35 sulphonic groups per one phenyl propane unit. Lignin removal during pulping showed dependence on its location in different morphological parts of the fibers and related structural characteristics, which were discussed accordingly. A role of the polysaccharide complex in the accessibility of lignin was highlighted. A noticeable cleavage of β-O-4 linkages occurred in lignin already dissolved in pulping liquor at the end of cooking.

Ultrasound-assisted synthesis of 4-thiazolidinone Schiff bases and their antioxidant, α-glucosidase, α-amylase inhibition, mode of inhibition and computational studies

AbstractDiabetes mellitus (DM) has become a growing concern to global public health, being at the forefront of acute disorders and causes of mortality across the globe. Clinically approved drugs that are currently being used are faced with severe side effects, consequently necessitating the development of new drugs with no/fewer side effects and improved pharmacological potency. Herein, we report a rapid and efficient synthesis of thiazolidinone Schiff bases (2a-2t) from benzylidenehydrazines and thioglycolic acid under neat conditions through ultra-sonication. All the synthesized compounds were obtained in exceptional yields (89–95%) and confirmed by 1D and 2D nuclear magnetic resonance (NMR) spectroscopy, as well as High-resolution mass spectrometry (HRMS). The synthesized compounds were then evaluated for their antidiabetic activity through α-glucosidase and α-amylase inhibitory potentials and their antioxidant activity through Nitric Oxide (NO), 2,2′-diphenyl-1-picrylhydrazyl (DPPH), and Ferric reducing antioxidant power (FRAP) assays. Among them, 2q (IC50 = 96.63 μM) and 2h (IC50 = 125.27 μM) emerged as the most potent derivatives against α-amylase relative to reference drug acarbose (IC50 = 131.63 µM), respectively. Antioxidant evaluation further revealed that the synthesized derivatives were excellent NO scavengers disclosing 2n (IC50 = 44.95 µM) as the most potent derivative. Moreover, in silico ADME calculations predicted these compounds to have excellent drug-like properties. Kinetic studies disclosed the mode of α-amylase inhibition as competitive while molecular docking studies of the most active derivatives performed into the binding active site of human pancreatic α-amylase enzyme deciphered their ligand-protein interactions that explicated their observed experimental potencies.

Morpho- and Chemotyping of Holopelagic Sargassum Species Causing Massive Strandings in the Caribbean Region

The specific identification of three major morphotypes of the tropical holopelagic Sargassum species causing massive strandings on the African and Caribbean coastlines was attempted by morphological characterisation as well as quantitative and qualitative analyses of several metabolites. Of the 25 morphological variables studied on 208 samples from the North Atlantic Ocean, 22 were used to establish a dichotomous identification key, allowing without any doubt the identification of each morphotype based on their morphological criteria alone. We also attempted to differentiate morphotypes using chemical fingerprintings (HR-MAS NMR) and markers by analysing pigment level and composition using High Pressure Liquid Chromatography, terpene profiles by Thin Layer Chromatography, phenolic compound levels by the Folin-Ciocalteu assay and structures by 2D Nuclear Magnetic Resonance spectroscopy, and fatty acid composition by Gas Chromatography. While pigment level and composition, terpene profiles, and phenolic contents were not discriminating, quantification of eight fatty acids enabled the differentiation of the three morphotypes. Furthermore, phlorotannin purification permitted their structural characterisation allowing discrimination between the three morphotypes. Our study highlights the potential of the free fatty acid profile and phlorotannin structure as good chemomarkers in order to discriminate between the three morphotypes of holopelagic Sargassum.

Chemical and Biological Characterization of the Ethyl Acetate Fraction from the Red Sea Marine Sponge Hymedesmia sp.

Hymedesmiidae is one of the largest families of marine sponges and stands out as an exceptional source of variable metabolites with diverse biological activities. In this study, the ethyl acetate fraction (HE) of a Hymedesmia sp. marine sponge from the Red Sea, Egypt, was analyzed for the first time using Ultra-performance liquid chromatography electrospray ionization tandem mass spectrometry (UPLC-ESI-MS/MS) analysis. The analysis tentatively identified 29 compounds in this fraction, including the isolation and identification of six compounds (two pyrimidine nucleosides, one purine, and two pyrimidine bases in addition to one cerebroside) for the first time. The structures of the isolated compounds were established by 1D and 2D NMR (nuclear magnetic resonance), MS (mass spectrometry), and IR (infrared) spectroscopy. Furthermore, the cytotoxic, antioxidant, and antimicrobial activities of the ethyl acetate fraction were evaluated in vitro. The fraction exhibited strong DPPH scavenging activity with an IC50 of 78.7 µg/mL, compared to ascorbic acid as a positive control with an IC50 of 10.6 µg/mL. It also demonstrated significant cytotoxic activity with IC50 values of 13.5 µg/mL and 25.3 µg/mL against HCT-116 and HEP-2 cell lines, respectively, compared to vinblastine as a positive control with IC50 values of 2.34 µg/mL and 6.61 µg/mL against HCT-116 and HEP-2, respectively. Additionally, the ethyl acetate fraction displayed promising antibacterial activity against S. aureus with a MIC value of 62.5 µg/mL, compared to ciprofloxacin as a positive control with MIC values of 1.56 µg/mL for Gram-positive bacteria and 3.125 µg/mL for Gram-negative bacteria. It also exhibited activity against E. coli and P. aeruginosa with MIC values of 250 µg/mL and 500 µg/mL, respectively. Briefly, this is the first report on the biological activities and secondary metabolite content of the ethyl acetate fraction of Hymedesmia sp. marine sponge, emphasizing the potential for further research against resistant bacterial and fungal strains, as well as different cancer cell lines. The ethyl acetate fraction of Hymedesmia sp. is a promising source of safe and unique natural drugs with potential therapeutic and pharmaceutical benefits.

Parallel β-Sheet Structure and Structural Heterogeneity Detected within Q11 Self-Assembling Peptide Nanofibers.

Q11 peptide nanofibers are used as a biomaterial for applications such as antigen presentation and tissue engineering, yet detailed knowledge of molecular-level structure has not been reported. The Q11 peptide sequence was designed using heuristics-based patterning of hydrophobic and polar amino acids with oppositely charged amino acids placed at opposite ends of the sequence to promote antiparallel β-sheet formation. In this work, we employed solid-state nuclear magnetic resonance spectroscopy (NMR) to evaluate whether the molecular organization within Q11 self-assembled peptide nanofibers is consistent with the expectations of the peptide designers. We discovered that Q11 forms a distribution of molecular structures. NMR data from two-dimensional (2D) 13C-13C dipolar-assisted rotational resonance indicate that the K3 and E9 residues between Q11 β-strands are spatially proximate (within ∼0.6 nm). Frequency-selective rotational echo double resonance (fsREDOR) on K3 Nζ and E9 Cδ-labeled sites showed that approximately 9% of the sites are close enough for salt bridge formation to occur. Surprisingly, dipolar recoupling measurements revealed that Q11 peptides do not assemble into antiparallel β-sheets as expected, and structural analysis using Fourier-transform infrared spectroscopy and 2D NMR alone can be misleading. 13C PITHIRDS-CT dipolar recoupling measurements showed that the most abundant structure consists of parallel β-sheets, in contrast to the expected antiparallel β-sheet structure. Structural heterogeneity was detected from 15N{13C} REDOR measurements, with approximately 22% of β-strands having antiparallel nearest neighbors. We cannot propose a complete structural model of Q11 nanofibers because of the complexity involved when examining structurally heterogeneous samples using NMR. Altogether, our results show that while heuristics-based patterning is effective in promoting β-sheet formation, designing a peptide sequence to form a targeted β-strand arrangement remains challenging.

Identification of major degradation products of Clorsulon drug substance including its degradation pathways by high resolution mass spectrometry and NMR

Clorsulon is an effective anthelmintic drug substance extensively used in the treatment of parasitic infestations in both cattle and sheep. An in-depth investigation of Clorsulon’s degradation products (DPs) was carried out through forced degradation study to comprehend its degradation path. A total of eight degradation products were separated under various stress degradation conditions. Structural elucidation of these DPs was conducted using ultra-high performance liquid chromatography-high resolution mass spectrometry (UHPLC-HRMS), and their fragmentation patterns were compared to that of the parent compound. Adequate amount of DP-4 was isolated and purified by semi-preparative high-performance liquid chromatography (HPLC) methods. Subsequently, it was examined in detail using both 1D and 2D NMR (nuclear magnetic resonance spectroscopy). Most probable mechanistic pathways for the formation of degradation products under various stress degradation conditions were proposed to better understand the degradation profile. Based on the results of the stress study, Clorsulon drug substance was found to be unstable under photolytic and oxidative conditions. Understanding Clorsulon's degradation pathway is essential for determining shelf-life prediction of the finished product, safety and efficacy assurance, and guiding the development of stable, high-quality formulations.

Analysis of <i>cis</i>-isomer-enriched dihydroquercetin sample by 1D and 2D NMR spectroscopy

Introduction. The structure of dihydroquercetin (DHQ) is characterized by two chiral centers at positions 2 and 3 of the benzopyran cycle, resulting in possible diastereomers: trans- and cis-isomers. Therefore, the development of methods for qualitative and quantitative control of DHQ diastereomers in analyzed samples is essential for patient safety management. Nuclear magnetic resonance (NMR) spectroscopy is one of the physicochemical methods that can be used for this purpose.Aim. The study objective was to accumulate the analytical and structural characteristics of cis-DHQ by NMR spectroscopy of the spheroidal form of this flavonoid (DHQs).Materials and Methods. 1D 1H, 1H,1H-COSY, 1H,1H-NOESY, and 1H,13C-HSQC NMR spectra were acquired at 298 K on an 800 MHz NMR spectrometer equipped with a TXI triple resonance probe. The number of scans was 32. The mixing time in the NOESY experiment was 400 ms. The 1H and 13C were analyzed using CcpNmr software. The dihedral angles were calculated by applying the Karplus equation.Results and discussion. In trans-DHQ, the chemical shift values for H2 and H3 are 4.93 ppm and 4.52 ppm, respectively, and in cis-DHQ they are 5.31 ppm and 4.20 ppm, respectively. The spin-spin coupling constants between H2 and H3 of trans- and cis-DHQ are 12.00 Hz and 2.40 Hz, respectively. Thus, the dihedral angles for the trans- and cis-isomers are 154° and 64°, respectively. We found that DHQs contains 12.5 % of the cis-isomer.Conclusion. Our experiments confirmed that NMR spectroscopy can discriminate between trans- and cis-DHQ based on the chemical shift values for the cross-peaks of H2 and H3. The second major finding was that this method can be considered as a more selective quantitative analysis than HPLC with UV detection without reference. One of the most important results of this study for drug development is the updated information on the structural parameters of DHQ diastereomers in the liquid phase.

Isolation, characterization, identification and quantification of 6-F oxyphenisatin dipropionate, a novel illegal additive, from a fruit-flavored jelly

ObjectiveThis study is aimed to screen, identify and detect illegal additives from healthcare products which claim or imply to have weight-loss effects. MethodUltra-high performance liquid chromatography-quadruple-time-of-flight mass spectroscopy (UPLC-Q-TOF/MS) was employed to perform non-targeted screening of illegal additives from a total of 26 batches of healthcare products with weight-loss effects. A novel oxyphenisatin dipropionate analog was discovered in a fruit-flavored jelly that was not clearly labeled as containing added drugs. After being separated and purified by silica gel column chromatography, the analog was unambiguously characterized by one-dimensional (1D) and two-dimensional (2D) nuclear magnetic resonance (NMR) spectroscopies. The molecular structure of the analog was finally identified by comparing the spectra of the analog with those of suspected candidates prepared by de novo synthesis strategy. Thereafter, a sensitive and precise reversed phase ultra performance liquid chromatography coupled with photodiode array (UPLC-PDA) detection method was developed and verified for the determination of the analog in 15 batches of real samples. ResultsIn the MS/MS spectra, the signal intensity of mass/charge ratios (m/z, 242 and 214) of the novel analog fragments was highly similar to that of mass/charge ratios (m/z, 224 and 196) of oxyphenisatin dipropionate fragments. Additionally, the 1D NMR spectrum of the analog was completely consistent with that of one of the suspected candidates prepared by the de novo synthesis strategy. Based on the above analysis, the structure of the analog was determined as 3,3-bis[4'-(propionyloxy)phenyl]-6-fluoro-2-oxoindoline, which was briefly named 6-F oxyphenisatin dipropionate. A developed quantitative method showed good linearity (R2 > 0.999) in a concentration range of 1.0–100 μg/mL. The limits of detection (LOD) and quantification (LOQ) for the analog was 3 mg/kg and 10 mg/kg, respectively. The average recoveries of the analog from spiked three different matrix samples in low (1 time of LOQ), medium (2 times of LOQ), and high (10 times of LOQ) concentrations were varied from 93.9 % to 107.8 % with a precision of 0.03–1.56 %. Results of quantitative analysis in 15 batches of healthcare products revealed that the content of 6-F oxyphenisatin dipropionate in a fruit-flavored jelly and a solid beverage was 118 mg/kg and 330 mg/kg, respectively. ConclusionIn terms of its structure, 6-F oxyphenisatin dipropionate replaces hydrogen atom by the fluorine atom at position 6 on the indolinone fragment in oxyphenisatin dipropionate. To our best knowledge, 6-F oxyphenisatin dipropionate has never been detected as an illegal additive in foods. Such illegal addition of the analog to foods is more concealing, thus the supervision and testing departments should attach great importance to its application in food markets.

New indole derivatives from endophytic fungus Colletotruchum sp. HK-08 originated from leaves of Nerium indicum

ObjectiveTo study secondary metabolites from endophytic fungus Colletotruchum sp. HK-08 originated from the leaves of Nerium indicum. MethodsThe compounds were isolated by various column chromatographic techniques, and their structures were elucidated by spectroscopic techniques [high resolution electrospray ionization mass spectroscopy (HRESIMS), one-dimensional (1D) and two-dimensional (2D) nuclear magnetic resonance spectroscopy (NMR)], as well as comparison with literature data. The Ellman method was used to determine the acetylcholinesterase (AChE) inhibitory activity. ResultsFour indole derivatives were identified from Colletotruchum sp. HK-08, including 6′-hydroxymonaspiloindole (1), 2-(2-oxoindolin-3-yl)ethyl 2-(4-hydroxyphenyl) acetate (2), 2-(2-oxoindolin-3-yl)ethyl 2-(2-hydroxyphenyl)acetate (3), and monaspiloindole (4). Compound 4 presented weak AChE inhibitory activity with IC50 value of (69.30 ± 6.27) μmol/L [tacrine as the positive control, with IC50 value of (0.61 ± 0.07) μmol/L]. ConclusionCompounds 1–3 were new compounds, and compound 4 had weak AChE inhibitory activity.

Bioprospection of Tenellins Produced by the Entomopathogenic Fungus Beauveria neobassiana.

Fungi are known as prolific producers of bioactive secondary metabolites with applications across various fields, including infectious diseases, as well as in biological control. However, some of the well-known species are still underexplored. Our current study evaluated the production of secondary metabolites by the entomopathogenic fungus Beauveria neobassiana from Thailand. The fermentation of this fungus in a liquid medium, followed by preparative high-performance liquid chromatography (HPLC) purification, resulted in the isolation of a new tenellin congener, namely pretenellin C (1), together with five known derivatives (2-6). Their chemical structures were elucidated by 1D and 2D nuclear magnetic resonance (NMR) spectroscopy in combination with high-resolution electrospray ionization mass spectrometry (HR-ESI-MS). We evaluated the antimicrobial and cytotoxic activities from all isolated compounds, as well as their inhibitory properties on biofilm formation by Staphylococcus aureus. Generally, tenellins displayed varying antibiofilm and cytotoxic effects, allowing us to propose preliminary structure-activity relationships (SARs). Among the tested compounds, prototenellin D (2) exhibited the most prominent antibiofilm activity, while its 2-pyridone congener, tenellin (4), demonstrated potent cytotoxic activity against all tested cell lines. Given the fact that the biological activities of the tenellins have so far been neglected in the past, our study could provide a good starting point to establish more concise structure-activity relationships in the near future.

Identification, Synthesis, and Characterization of N-Formyl Mirabegron: A New Degradation Product Formed by Formic Acid Impurity in Pharmaceutical Excipients.

This study demonstrated the impact of formic acid (FAc), a common reactive impurity in pharmaceutical excipients, on the stability of mirabegron (MB). The investigation of MB-excipient compatibility tests revealed the formation of a new degradation product, FAc-DP, at 0.2% after 7 days of isothermal stress at 55°C. FAc-DP was synthesized and characterized as N-formyl MB using liquid chromatography-mass spectrometry (LC-MS) and both 1D and 2D nuclear magnetic resonance spectroscopy (NMR).