3D Cell Culture Models Research Articles

Modeling ameloblast-matrix interactions using 3D cell culture.

The distinct morphology adopted by ameloblasts during amelogenesis is highly stage specific and involved intimately with the development of a hierarchical enamel microstructure. The molecular mechanisms that govern the development of an elongated and polarized secretory ameloblast morphology and the potential roles played by the enamel matrix proteins in this process are not fully understood. Thus far, the in vitro models that have been developed to mimic these early cell-matrix interactions have either been unable to demonstrate direct morphological change or have failed to adapt across ameloblast cell lines. Here, we use a recently established 3D cell culture model to examine the interactions between HAT-7 cells and the major enamel matrix proteins, amelogenin and ameloblastin. We demonstrate that HAT-7 cells selectively respond to functional EMPs in culture by forming clusters of tall cells. Aspect ratio measurements from three-dimensional reconstructions reveal that cell elongation is 5-times greater in the presence of EMPs when compared with controls. Using confocal laser scanning microscopy, we observe that these clusters are polarized with asymmetrical distributions of Par-3 and claudin-1 proteins. The behavior of HAT-7 cells in 3D culture with EMPs is comparable with that of ALC and LS-8 cells. The fact that the 3D model presented here is tunable with respect to gel substrate composition and ameloblast cell type highlights the overall usefulness of this model in studying ameloblast cell morphology in vitro.

Evaluation of B7-H3 Targeted Immunotherapy in a 3D Organoid Model of Craniopharyngioma.

A craniopharyngioma (CP) is a rare epithelial tumor of the sellar and parasellar region. CPs are difficult to treat due to their anatomical proximity to critical nervous structures, which limits the ability of the surgeon to completely resect the lesion, exposing patients to a high risk of recurrence. The treatment of craniopharyngiomas is primarily surgery and radiotherapy. So far, neither a cell line nor an animal model has been established, and thus data on other treatment options, such as chemotherapy and immunotherapy, are limited. Here, the expression profile of the pan-cancer antigen B7-H3 in various cancer types including CP was examined by immunohistochemistry. An in vitro organoid model was established by using fresh tissue biospecimens of CP. Based on the organoid model, we evaluated the antitumor efficacy of B7-H3-targeted immunotherapy on CP. As a result, the highest expression of B7-H3 was observed in CP tissues across various cancer types. Although B7-H3-targeted chimeric antigen-receptor T cells show obvious tumor-killing effects in the traditional 2D cell culture model, limited antitumor effects were observed in the 3D organoid model. The B7-H3-targeted antibody-DM1 conjugate exhibited a potent tumor suppression function both in 2D and 3D models. In conclusion, for the first time, we established an organoid model for CP and our results support that B7-H3 might serve as a promising target for antibody-drug conjugate therapy against craniopharyngioma.

Vascularization Strategies in 3D Cell Culture Models: From Scaffold-Free Models to 3D Bioprinting.

The discrepancies between the findings in preclinical studies, and in vivo testing and clinical trials have resulted in the gradual decline in drug approval rates over the past decades. Conventional in vitro drug screening platforms employ two-dimensional (2D) cell culture models, which demonstrate inaccurate drug responses by failing to capture the three-dimensional (3D) tissue microenvironment in vivo. Recent advancements in the field of tissue engineering have made possible the creation of 3D cell culture systems that can accurately recapitulate the cell-cell and cell-extracellular matrix interactions, as well as replicate the intricate microarchitectures observed in native tissues. However, the lack of a perfusion system in 3D cell cultures hinders the establishment of the models as potential drug screening platforms. Over the years, multiple techniques have successfully demonstrated vascularization in 3D cell cultures, simulating in vivo-like drug interactions, proposing the use of 3D systems as drug screening platforms to eliminate the deviations between preclinical and in vivo testing. In this review, the basic principles of 3D cell culture systems are briefly introduced, and current research demonstrating the development of vascularization in 3D cell cultures is discussed, with a particular focus on the potential of these models as the future of drug screening platforms.

SpheroidAnalyseR-an online platform for analyzing data from 3D spheroids or organoids grown in 96-well plates.

Spheroids and organoids are increasingly popular three-dimensional (3D) cell culture models. Spheroid models are more physiologically relevant to a tumor compared to two-dimensional (2D) cultures and organoids are a simplified version of an organ with similar composition. Spheroids are often only formed from a single cell type which does not represent the situation in vivo. However, despite this, both spheroids and organoids can be used in cell migration studies, disease modelling and drug discovery. A drawback of these models is, however, the lack of appropriate analytical tools for high throughput imaging and analysis over a time course. To address this, we have developed an R Shiny app called SpheroidAnalyseR: a simple, fast, effective open-source app that allows the analysis of spheroid or organoid size data generated in a 96-well format. SpheroidAnalyseR processes and analyzes datasets of image measurements that can be obtained via a bespoke software, described herein, that automates spheroid imaging and quantification using the Nikon A1R Confocal Laser Scanning Microscope. However, templates are provided to enable users to input spheroid image measurements obtained by user-preferred methods. SpheroidAnalyseR facilitates outlier identification and removal followed by graphical visualization of spheroid measurements across multiple predefined parameters such as time, cell-type and treatment(s). Spheroid imaging and analysis can, thus, be reduced from hours to minutes, removing the requirement for substantial manual data manipulation in a spreadsheet application. The combination of spheroid generation in 96-well ultra-low attachment microplates, imaging using our bespoke software, and analysis using SpheroidAnalyseR toolkit allows high throughput, longitudinal quantification of 3D spheroid growth whilst minimizing user input and significantly improving the efficiency and reproducibility of data analysis. Our bespoke imaging software is available from https://github.com/GliomaGenomics. SpheroidAnalyseR is available at https://spheroidanalyser.leeds.ac.uk, and the source code found at https://github.com/GliomaGenomics.

Generation and Evaluation of Hydrogel-Facilitated 3D Tumor Microenvironments of Breast Cancer

Engineered three-dimensional (3D) cell culture models can accelerate drug discovery, and lead to new fundamental insights in cell–cell, cell–extracellular matrix (ECM), and cell–biomolecule interactions. Existing hydrogel or scaffold-based approaches for generating 3D tumor models do not possess significant tunability and possess limited scalability for high throughput drug screening. We have developed a new library of hydrogels, called Amikagels, which are derived from the crosslinking of amikacin hydrate (AH) and poly(ethylene glycol) diglycidyl ether (PEGDE). Here we describe the use of Amikagels for generating 3D tumor microenvironments (3DTMs) of breast cancer cells. Biological characteristics of these breast cancer 3DTMs, such as drug resistance and hypoxia were evaluated and compared to those of two-dimensional (2D) monolayer cultures. Estrogen receptor (ER) positive breast cancer 3DTMs formed on Amikagels were more dormant compared to their respective 2D monolayer cultures. Relative to their respective 2D cultures, breast cancer 3DTMs were resistant to cell death induced by mitoxantrone and doxorubicin, which are commonly used chemotherapeutic drugs in cancer, including breast cancer. The drug resistance seen in 3DTMs was correlated with hypoxia seen in these cultures but not in 2D monolayer cultures. Inhibition of Mucin 1 (MUC1), which is overexpressed in response to hypoxia, resulted in nearly complete cell death of 2D monolayer and 3DTMs of breast cancer. Combination of an ER stress inducer and MUC1 inhibition further enhanced cell death in 2D monolayer and 3DTMs. Taken together, this study shows that the Amikagel platform represents a novel technology for the generation of physiologically relevant 3DTMs in vitro and can serve as a platform to discover novel treatments for drug-resistant breast cancer.

Abstract B028: Bacterial cytotoxin therapy limits tumor growth for pancreatic ductal adenocarcinoma

Abstract Treating pancreatic ductal adenocarcinoma (PDAC) with systemic chemotherapeutic drugs has remained a challenge, due in part to the hypovascularized and poorly perfused nature of PDAC tumors, impeding the accumulation of systemically delivered drugs. Several clinical trials aimed at improving drug delivery in PDAC, through targeting of ECM components (HALO-301) or stromal angiogenic signaling (IPI-926-03) have unfortunately not been effective. However, the features that have interfered with systemic therapy in PDAC are potential advantages for the use of bacterial therapies, as bacteria can actively migrate through tissues, thrive in hypoxic microenvironments, and benefit from local immune suppression. Recent developments in the field of synthetic biology have made it possible to engineer complex logic circuits into bacteria, enabling the production of anticancer therapies directly within the tumor parenchyma. Furthermore, live bacteria, once colonized within the tumor niche, are capable of providing a stable source of anticancer compounds directly, rather than relying on repeated systemic doses. We have therefore worked to develop novel bacterial strains and demonstrate preclinical efficacy of a novel strain of therapeutic bacteria for targeting PDAC. We began by testing a range of bacteria-produced toxins and identified the pore-forming protein theta toxin as having the greatest effect in both 2D cell culture and PDAC explant (tissue slice) models. We then engineered a non-toxic probiotic bacteria, E. coli Nissle 1917, to produce either theta toxin or GFP following induction with acyl-homoserine lactone (AHL). To assess preclinical efficacy, we performed intratumoral injections of live GFP- and theta-expressing bacteria into the “KPC” genetically engineered mouse model (Kras LSL.G12D/+; Tp53 LSL.R172H/+; PdxCre tg/+). While GFP-producing bacteria did not induce a change in tumor growth kinetics, treatment with theta toxin-producing bacteria demonstrated prolonged stabilization of tumor growth, increasing the doubling time from 13.7 days (GFP) to 32.5 days (theta) without additional therapy. Indeed, one theta-treated KPC animal lived 113 days following a single bacterial injection, compared to a median of ~12 days for vehicle- or gemcitabine-treated historical controls. Histological analyses demonstrated that diffuse populations of bacteria co-localized with regions of tumor necrosis and cell death, but that bacterial presence and evidence of increased cell death was not observed in healthy tissues, such as the lung, liver, intestine, and diaphragm. Strikingly, while there was minimal spread of bacteria to non-tumor tissues, we observed translocation of the bacteria to regions of liver metastases and distant papillomas following injection of the primary pancreatic tumor, suggesting a mechanism for targeting both known and unknown metastases following local administration. Together these studies demonstrate potent preclinical activity of cytotoxic bacterial therapy as a novel strategy to circumvent the challenges of systemic treatment of PDAC. Citation Format: Amanda R. Decker, Tetsuhiro Harimoto, Steve A. Sastra, Tal Danino, Kenneth Olive. Bacterial cytotoxin therapy limits tumor growth for pancreatic ductal adenocarcinoma [abstract]. In: Proceedings of the AACR Special Conference on Pancreatic Cancer; 2022 Sep 13-16; Boston, MA. Philadelphia (PA): AACR; Cancer Res 2022;82(22 Suppl):Abstract nr B028.

Factor VIII and Von Willebrand Factor Inhibit Osteoclastogenesis in a Humanized Cell Culture Model

Background: Patients with hemophilia A suffer from decreased bone mineral density. It is unknown whether the absence of factor VIII (FVIII) might play a direct causative role. Aim: To investigate the effect of recombinant FVIII (rFVIII, simoctocog alfa) and von Willebrand factor (vWF) on osteoclastogenesis in a humanized two-dimensional (2D) cell culture model. Simoctocog alfa is a rFVIII product manufactured using a human cell line without chemical modification or protein fusion. Methods: CD14+ monocytes from male donors were cultured for 14 days with 10% human serum under the influence of macrophage-colony stimulating factor (M-CSF) and receptor activator of nuclear factor kappa-B ligand (RANKL), in the presence and absence of osteoprotegerin (OPG). On days 0, 4, 7 and 11 cells were incubated with 10 IU/ml rFVIII, 10 IU/ml vWF or 10 IU/ml rFVIII/vWF. Tartrate-resistant acid phosphatase (TRAP) activity was measured in the supernatant on day 14 using a colorimetric assay with p-nitrophenylphosphate (pNPP) as substrate. Data were normalized to the condition with mCSF/RANKL alone, or mCSF/RANKL/OPG. Quantitative PCR of cathepsin K (CATK) and nuclear factor of activated T cells (NFATc) was performed. Results: In the absence of OPG, osteoclastogenesis was significantly reduced by the addition of vWF (p<0.001) or the combination rFVIII/VWF (p<0.001). In the presence of OPG, addition of vWF (p<0.001), rFVIII (p<0.05), or the combination rFVIII/VWF (p<0.01) significantly reduced osteoclastogenesis. Similar results were obtained for analyses of CATK and NFATc gene expression. Conclusion: We demonstrated an inhibitory effect of rFVIII, vWF and rFVIII/VWF on osteoclastogenesis in an in vitro model using human serum as opposed to the more commonly used fetal calf serum. As osteoclastogenesis has a high donor-to-donor variation, we are currently testing more donors to see if dependencies on age or blood type exist. These data provide a first insight into mechanisms underlying the reduced bone mass observed in patients with hemophilia A. Figure 1View largeDownload PPTFigure 1View largeDownload PPT Close modal

Can 3D bioprinting solve the mystery of senescence in cancer therapy?

Tumor dormancy leading to cancer relapse is still a poorly understood mechanism. Several cell states such as quiescence and diapause can explain the persistence of tumor cells in a dormant state, but the potential role of tumor cell senescence has been met with hesitance given the historical understanding of the senescent growth arrest as irreversible. However, recent evidence has suggested that senescence might contribute to dormancy and relapse, although its exact role is not fully developed. This limited understanding is largely due to the paucity of reliable study models. The current 2D cell modeling is overly simplistic and lacks the appropriate representation of the interactions between tumor cells (senescent or non-senescent) and the other cell types within the tumor microenvironment (TME), as well as with the extracellular matrix (ECM). 3D cell culture models, including 3D bioprinting techniques, offer a promising approach to better recapitulate the native cancer microenvironment and would significantly improve our understanding of cancer biology and cellular response to treatment, particularly Therapy-Induced Senescence (TIS), and its contribution to tumor dormancy and cancer recurrence. Fabricating a novel 3D bioprinted model offers excellent opportunities to investigate both the role of TIS in tumor dormancy and the utility of senolytics (drugs that selectively eliminate senescent cells) in targeting dormant cancer cells and mitigating the risk for resurgence. In this review, we discuss literature on the possible contribution of TIS in tumor dormancy, provide examples on the current 3D models of senescence, and propose a novel 3D model to investigate the ultimate role of TIS in mediating overall response to therapy.

IN-VITRO MELANOGENESIS, CYTOTOXICITY AND ANTIOXIDANT ACTIVITIES OF Peltophorum pterocarpum LEAF EXTRACTS

Melanin is a protective pigment against cellular damage and skin cancer. Peltophorum pterocarpum has been used for centuries to treat skin diseases like eczema and psoriasis. However, whether P. pterocarpum leaf extract can affect melanin synthesis with the advantage of antioxidant defense against ultraviolet (UV) radiation remains to be investigated. We aimed to examine the melanogenesis, cytotoxicity, and antioxidant activities of P. pterocarpum leaf extracts. A two-dimensional (2D) cell culture model was employed to demonstrate the effect of P. pterocarpum extracts on melanin synthesis. The cell viability of B16-F1 melanoma cells was measured by Neutral Red Uptake (NRU) assay. Antioxidant activity was accessed using 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2’,7’-dichlorodihydrofluorescein diacetate (DCFH-DA) assays. The ethanol extract of P. pterocarpum dose-dependently increased the melanin content and displayed cytotoxicity to B16-F1 melanoma cells at the highest concentration. In contrast, the equal amounts of the aqueous extract significantly inhibited melanin synthesis and did not show any cytotoxic effects on B16-F1 melanoma cells. The P. pterocarpum ethanol extract had a significantly higher total phenolic and flavonoid content than the aqueous extract and was more effective at scavenging DPPH free radicals and intracellular ROS induced by UVB, with IC50 of 519.24 ± 122.57 vs 1798.45 ± 143.09 µg/mL and 878.00 ± 23.50 vs 1379.00 ± 21.81 µg/mL, respectively. These findings suggest that the pro-melanogenic and anti-melanogenic activities of P. pterocarpum extract with antioxidant capacity against UVB-induced cellular damage are affected by the total phenolic and flavonoid contents.

Organoid Technologies for SARS-CoV-2 Research.

Purpose of ReviewOrganoids are an emerging technology utilizing three-dimensional (3D), multi-cellular in vitro models to represent the function and physiological responses of tissues and organs. By using physiologically relevant models, more accurate tissue responses to viral infection can be observed, and effective treatments and preventive strategies can be identified. Animals and two-dimensional (2D) cell culture models occasionally result in inaccurate disease modeling outcomes. Organoids have been developed to better represent human organ and tissue systems, and accurately model tissue function and disease responses. By using organoids to study SARS-Cov-2 infection, researchers have now evaluated the viral effects on different organs and evaluate efficacy of potential treatments. The purpose of this review is to highlight organoid technologies and their ability to model SARS-Cov-2 infection and tissue responses.Recent FindingsLung, cardiac, kidney, and small intestine organoids have been examined as potential models of SARS-CoV-2 infection. Lung organoid research has highlighted that SARS-CoV-2 shows preferential infection of club cells and have shown value for the rapid screening and evaluations of multiple anti-viral drugs. Kidney organoid research suggests human recombinant soluble ACE2 as a preventative measure during early-stage infection. Using small intestine organoids, fecal to oral transmission has been evaluated as a transmission route for the virus. Lastly in cardiac organoids drug evaluation studies have found that drugs such as bromodomain, external family inhibitors, BETi, and apabetalone may be effective treatments for SARs-CoV-2 cardiac injury.SummaryOrganoids are an effective tool to study the effects of viral infections and for drug screening and evaluation studies. By using organoids, more accurate disease modeling can be performed, and physiological effects of infection and treatment can be better understood.

Investigation of the Interaction of Adipose-Derived Mesenchymal Stem Cells with ε-Polycaprolactone and Egg White Scaffolds

The development of three-dimensional (3D) cell culture models is becoming increasingly important due to their numerous advantages over conventional monolayer culture. This study aimed to examine the interaction of adipose tissue-derived mesenchymal stem cells (AD-MSCs) with scaffolds composed of ε-polycaprolactone (ε-PCL) and egg white. In our study, ε-PCL and egg white scaffolds were produced from their monomers by tin octoate catalyzed and heat polymerization, respectively. Characterization of ε-PCL was carried out by Gel Permeation Chromatography (GPC), Fourier Transform Infrared Spectrophotometry (FTIR), Proton Nuclear Magnetic Resonance (H-NMR), Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM). AD-MSCs labeled with red fluorescent CellTracker CM-DiI were cultured on egg white and ε-PCL scaffolds for 12 days. Cell viability was determined using 3-(4.5-Dimethylthiazol-2yl)-2.5-diphenyltetrazolium bromide (MTT) and nitric oxide (NO) level was evaluated for toxicity. The results showed that the number of AD-MSCs in the egg white scaffold increased periodically for 12 days compared to the other groups. Although the number of AD-MSCs in the ε-PCL scaffold increased until day 6 of the culture, the number of cells started to decrease after day 6. These results were associated with the toxic effect of lactic acid release on cells resulting from the decomposition of ε-PCL scaffolds through catabolic reactions. Therefore, these results indicated that the egg white scaffold enhanced and maintained cell adhesion and cell viability more than the ε-Polycaprolactone scaffold and could be used as a scaffold in tissue engineering studies involving stem cells.

Three-Dimensional in Vitro Models: A Promising Tool To Scale-Up Breast Cancer Research.

Common models used in breast cancer studies, including two-dimensional (2D) cultures and animal models, do not precisely model all aspects of breast tumors. These models do not well simulate the cell-cell and cell-stromal interactions required for normal tumor growth in the body and lake tumor like microenvironment. Three-dimensional (3D) cell culture models are novel approaches to studying breast cancer. They do not have the restrictions of these conventional models and are able to recapitulate the structural architecture, complexity, and specific function of breast tumors and provide similar in vivo responses to therapeutic regimens. These models can be a link between former traditional 2D culture and in vivo models and are necessary for further studies in cancer. This review attempts to summarize the most common 3D in vitro models used in breast cancer studies, including scaffold-free (spheroid and organoid), scaffold-based, and chip-based models, particularly focused on the basic and translational application of these 3D models in drug screening and the tumor microenvironment in breast cancer.

Super-Long SERS Active Single Silver Nanowires for Molecular Imaging in 2D and 3D Cell Culture Models

Establishing a systematic molecular information analysis strategy for cell culture models is of great significance for drug development and tissue engineering technologies. Here, we fabricated single silver nanowires with high surface-enhanced Raman scattering activity to extract SERS spectra in situ from two-dimensional (2D) and three-dimensional (3D) cell culture models. The silver nanowires were super long, flexible and thin enough to penetrate through multiple cells. A single silver nanowire was used in combination with a four-dimensional microcontroller as a cell endoscope for spectrally analyzing the components in cell culture models. Then, we adopted a machine learning algorithm to analyze the obtained spectra. Our results show that the abundance of proteins differs significantly between the 2D and 3D models, and that nucleic acid-rich and protein-rich regions can be distinguished with satisfactory accuracy.

Efficacy of green tea extract on PC3 prostate cancer cells through upregulation of miR-195 expression and suppression of epithelial to mesenchymal transition.

To evaluate anticancer efficacy of green tea extract (GTE) on PC3 prostate cancer cells. By using quantitative real-time polymerase chain reaction (qRT-PCR) and Western blot methods, the expression of miR-195 and the epithelial to mesenchymal transition (EMT) markers such as E-cadherin and vimentin was analyzed. Based on the results of 2D and 3D cell culture models, the inhibition of EMT and up regulation of miR-195 expression were detected. Our findings will be helpful to design anti-tumor regimens with natural product original, and more studies will be required to identify the related mechanisms involving anticancer activities of green tea miRNAs.

Microtumor Spheroids Provide a Model for Studying Molecules Involved in Vascular Organization: An Illustrative Study for VE-cadherin.

A growing body of research is contributing to the development of three-dimensional (3D) tissue models to close the gap between two-dimensional (2D) cell culture and animal models. Here, we report fundamental studies to confirm the modification of vascular endothelial (VE)-cadherin by a tumor microenvironment using 2D and 3D in vitro models of triple-negative breast cancer cells co-cultured with endothelial cells. Breast cancer cells were cultivated as a monolayer (2D) on plates for 5 days or as microtumor spheroids (3D) with endothelial cells for up to 6 days. Phosphotyrosine-containing protein panels were analyzed in both cell types and upon co-culture. Microtumor spheroid size was evaluated via phase contrast microscopy. The content of VE-cadherin and phospho-VE-cadherin was determined. The effect of microtumor spheroid on the capillary network formed by endothelial cells was quantified by ImageJ Angiogenesis Analyzer. Sunitinib was used to determine drug efficacy in this model. The activity of signaling pathways in endothelial cells, including phosphorylation of Y685-VE-cadherin, was increased by the presence of breast cancer cells. In the 3D co-culture system, we established a ratio of the two cell types which allowed viability for 6 days. As a proof-of-concept of the 3D co-culture system for the process of drug discovery and development, we used the system to quantify the efficacy of sunitinib on the phosphorylation of VE-cadherin. In summary, we established 2D and 3D breast cancer-endothelial cell test systems compatible for detection of minimally tyrosine-phosphorylated proteins including VE-cadherin. The systems are capable of quantifying the effect of drugs on a tissue model of angiogenesis. This is a step towards developing tools for drug-efficacy testing that do not rely on live animals.

Advances in the application of 3D tumor models in precision oncology and drug screening.

Traditional tumor models cannot perfectly simulate the real state of tumors in vivo, resulting in the termination of many clinical trials. 3D tumor models’ technology provides new in vitro models that bridge the gap between in vitro and in vivo findings, and organoids maintain the properties of the original tissue over a long period of culture, which enables extensive research in this area. In addition, they can be used as a substitute for animal and in vitro models, and organoids can be established from patients’ normal and malignant tissues, with unique advantages in clinical drug development and in guiding individualized therapies. 3D tumor models also provide a promising platform for high-throughput research, drug and toxicity testing, disease modeling, and regenerative medicine. This report summarizes the 3D tumor model, including evidence regarding the 3D tumor cell culture model, 3D tumor slice model, and organoid culture model. In addition, it provides evidence regarding the application of 3D tumor organoid models in precision oncology and drug screening. The aim of this report is to elucidate the value of 3D tumor models in cancer research and provide a preclinical reference for the precise treatment of cancer patients.

Physiologically relevant microsystems to study viral infection in the human liver.

Viral hepatitis is a leading cause of liver disease and mortality. Infection can occur acutely or chronically, but the mechanisms that govern the clearance of virus or lack thereof are poorly understood and merit further investigation. Though cures for viral hepatitis have been developed, they are expensive, not readily accessible in vulnerable populations and some patients may remain at an increased risk of developing hepatocellular carcinoma (HCC) even after viral clearance. To sustain infection in vitro, hepatocytes must be fully mature and remain in a differentiated state. However, primary hepatocytes rapidly dedifferentiate in conventional 2D in vitro platforms. Physiologically relevant or physiomimetic microsystems, are increasingly popular alternatives to traditional two-dimensional (2D) monocultures for in vitro studies. Physiomimetic systems reconstruct and incorporate elements of the native cellular microenvironment to improve biologic functionality in vitro. Multiple elements contribute to these models including ancillary tissue architecture, cell co-cultures, matrix proteins, chemical gradients and mechanical forces that contribute to increased viability, longevity and physiologic function for the tissue of interest. These microsystems are used in a wide variety of applications to study biological phenomena. Here, we explore the use of physiomimetic microsystems as tools for studying viral hepatitis infection in the liver and how the design of these platforms is tailored for enhanced investigation of the viral lifecycle when compared to conventional 2D cell culture models. Although liver-based physiomimetic microsystems are typically applied in the context of drug studies, the platforms developed for drug discovery purposes offer a solid foundation to support studies on viral hepatitis. Physiomimetic platforms may help prolong hepatocyte functionality in order to sustain chronic viral hepatitis infection in vitro for studying virus-host interactions for prolonged periods.

3D engineered tissue models for studying human-specific infectious viral diseases.

Viral infections cause damage to various organ systems by inducing organ-specific symptoms or systemic multi-organ damage. Depending on the infection route and virus type, infectious diseases are classified as respiratory, nervous, immune, digestive, or skin infections. Since these infectious diseases can widely spread in the community and their catastrophic effects are severe, identification of their causative agent and mechanisms underlying their pathogenesis is an urgent necessity. Although infection-associated mechanisms have been studied in two-dimensional (2D) cell culture models and animal models, they have shown limitations in organ-specific or human-associated pathogenesis, and the development of a human-organ-mimetic system is required. Recently, three-dimensional (3D) engineered tissue models, which can present human organ-like physiology in terms of the 3D structure, utilization of human-originated cells, recapitulation of physiological stimuli, and tight cell–cell interactions, were developed. Furthermore, recent studies have shown that these models can recapitulate infection-associated pathologies. In this review, we summarized the recent advances in 3D engineered tissue models that mimic organ-specific viral infections. First, we briefly described the limitations of the current 2D and animal models in recapitulating human-specific viral infection pathology. Next, we provided an overview of recently reported viral infection models, focusing particularly on organ-specific infection pathologies. Finally, a future perspective that must be pursued to reconstitute more human-specific infectious diseases is presented.

Characterization of Three-Dimensional Trophoblast Spheroids: An Alternative Model to Study the Physiological Properties of the Placental Unit.

It was postulated that 3D cell culture models more accurately reflect the complex tissue physiology and morphology in comparison to 2D cell monolayers. Currently, there is a shortage of well-characterized and easily maintainable high-throughput experimental models of the human placenta. Here, we characterized three different 3D cultures (e.g., spheroids) derived from trophoblast cell lines and studied their functionality in comparison to primary fetal trophoblasts and placental tissue. The spheroid growth rates of JEG3, BeWo and HTR8/SVneo cell lines were similar among each other and were significantly larger in comparison to primary trophoblast spheroids. All spheroids exhibited migratory properties and shortest distances were registered for JEG3 spheroids. Even though all spheroids displayed invasive capabilities, only the invasive features of HTR8/SVneo spheroids resulted in specific branching. This was in agreement with the invasive properties of the spheroids obtained from primary trophoblasts. Human chorionic gonadotropin production was highest in JEG3 spheroids and only increased when stimulated with cAMP and forskolin in BeWo, but not HTR8/SVneo spheroids. The gene expression analysis confirmed that 3D trophoblast cell cultures and especially HTR8/SVneo spheroids showed considerable similarities with the gene expression profile of primary placental tissue. This study offers a broad characterization of 3D trophoblast spheroids that, in turn, can help in selecting the best model depending on the scientific question that needs to be answered.

Introducing micro physiological systems to evaluate new radiopharmaceuticals: A binding study with radiolabeled cetuximab

Abstract Radiopharmaceuticals can be used for targetspecific functional diagnostics, such as PET or SPECT imaging, or radionuclide therapy of diseased tissue, depending on the incorporated radionuclide. Following initial in vitro testing, radiopharmaceutical candidates are usually further characterized in small animals. Since reduction, replacement and refinement (3R) of animal testing is a central precept in preclinical research it would be beneficial to replace at least some of these tests by alternative methods. Using micro physiological system technology, various organ-on-chip models can be created with human cell systems/organoids, which are operated in a circulatory system under defined physiological conditions. Here we present first attempts to introduce micro physiological systems for evaluating radiopharmaceuticals using the radiolabeled anti-EGFR antibody cetuximab as reference compound. In a micro physiological system equipped with six 96-well plate-like microwells in a flow chamber, binding of 64Cu and 68Ga-labeled cetuximab to cells and spheroids grown from A431 (EGFR-positive) and MDA-MB435S (EGFR-negative) cells was measured and compared to conventional microplates. Specific saturation binding of radiolabeled cetuximab at increasing concentrations was analyzed using a phosphor imaging system. The affinity of radiolabeled cetuximab towards A431 spheroids measured in the micro physiological system was in the same range as that of the spheroids in conventional microplates. Within the assays in micro physiological systems, the results showed a trend towards increased affinity for A431 monolayers compared to the spheroids. The values of binding capacity for radiolabeled cetuximab on 2D and 3D A431 cell culture models were in the same order of magnitude when measured in micro physiological systems or in microplates. Building on these first promising results, the work will continue on MPS modules containing advanced human spheroid/ organoid models.