3D Cell Culture Models Research Articles

Flow cytometry as an analytical method of drug-induced apoptosis in 3D bioprinted melanoma cells

Three-dimensional (3D) cell culture systems have gained increasing interest in drug discovery and tissue engineering due to its inherent advantages in providing more physiologically relevant information and more predictive data for in vivo tests. Along with the development of more physiologically relevant 3D cell culture models, researchers bear the responsibility to validate new cell assay techniques capable of measuring and evaluating constructs that are physically larger and more complex compared to two-dimensional cell cultures. It is important to note that assays based on monolayer cultures may be insufficient for the use in 3D cell cultures models. In this study we firstly fabricated a 3D bioprinted hydrogel melanoma scaffold. This was used to validate a flow cytometry-based analytical method as a tool for 3D bioprinted structures to assess drug-induced apoptosis. The results indicated high robustness, reproducibility and sensitivity of the flow cytometric method established on the 3D cell-laden A375 melanoma hydrogel scaffolds. Over and above this, it was possible to determine the effect of etoposide on A375 melanoma cells using Annexin V and propidium iodide apoptosis assay.

Ouabain at nanomolar concentrations is cytotoxic for biliary tract cancer cells.

Biliary tract cancer is a deadly disease with limited therapeutic options. Ouabain is a well-known inhibitor of the pumping function of Na+/K+-ATPase, though there is evidence that low concentrations of ouabain lead to a reduction of cell viability of cancer cells independent of its inhibition of the pumping function of the Na+/K+-ATPase. Regarding the impact of ouabain on biliary tract cancer, no data is currently available. Therefore, we aimed for a first-time investigation of ouabain as a potential anti-neoplastic biliary tract cancer agent using comprehensive human biliary tract cancer in vitro models. We found that ouabain has a strong cell line-dependent cytotoxic effect with IC50 levels in the (low) nanomolar-range and that this effect was not associated with the mRNA expression levels of the Na+/K+-ATPase α, β and fxyd-subunits. Regarding the mode of cytotoxicity, we observed induction of apoptosis in biliary tract cancer cells upon treatment with ouabain. Interestingly, cytotoxic effects of ouabain at sub-saturating (< μM) levels were independent of cellular membrane depolarization and changes in intracellular sodium levels. Furthermore, using a 3D cell culture model, we found that ouabain disturbs spheroid growth and reduces the viability of biliary tract cancer cells within the tumor spheroids. In summary, our data suggest that ouabain possesses anti-biliary tract cancer potential at low μM-concentration in 2D and 3D in vitro biliary tract cancer models and encourage further detailed investigation.

A novel study of melatonin diffusion in a 3D cell culture model

Melatonin is now considered a major physiological regulator of many different functions including synchronization of circadian rhythms, antioxidant defense at different levels, immunomodulation, cell growth control, neuroprotector and anti-tumor agent. In addition to its membrane receptor-dependent actions, it has been classically assumed that its diffusion through lipid bilayers contribute to its intracellular actions, including direct and indirect free radical scavenging activities. While pineal gland is the major site of nocturnal production of the indolamine, skin is considered an important source of melatonin synthesis. Here, using a 3-D culture model of HaCaT cells in an artificial scaffold (epidermal equivalents), we have quantified diffusion of melatonin in these cells and compared it to 2-D or spheroid cultures. Diffusion in 3-D scaffold cultures was similar to that found in 2-D culture and proportion of intracellular melatonin was low. AFMK, a major oxidative metabolite of melatonin, was also found and quantified. Redox parameters including total ROS, superoxide or mitochondrial mass were also assayed. We also report the effect of melatonin on the cytoskeleton of normal human keratinocyte HaCaT cells. We propose HaCaT epidermal equivalents as an affordable, easy-to-use, 3-D cell culture tool to test diffusion rates of melatonin but also other similar small molecules. This 3-D models can also be studied at cellular and molecular level, including redox parameters, and can provide important information regarding molecules that can be topically added to skin. Similarly, mechanisms of transportation can also be approached with this methodology.

In vitro models to study natural killer cell dynamics in the tumor microenvironment.

Immunotherapy is revolutionizing cancer therapy. The rapid development of new immunotherapeutic strategies to treat solid tumors is posing new challenges for preclinical research, demanding novel in vitro methods to test treatments. Such methods should meet specific requirements, such as enabling the evaluation of immune cell responses like cytotoxicity or cytokine release, and infiltration into the tumor microenvironment using cancer models representative of the original disease. They should allow high-throughput and high-content analysis, to evaluate the efficacy of treatments and understand immune-evasion processes to facilitate development of new therapeutic targets. Ideally, they should be suitable for personalized immunotherapy testing, providing information for patient stratification. Consequently, the application of in vitro 3-dimensional (3D) cell culture models, such as tumor spheroids and organoids, is rapidly expanding in the immunotherapeutic field, coupled with the development of novel imaging-based techniques and -omic analysis. In this paper, we review the recent advances in the development of in vitro 3D platforms applied to natural killer (NK) cell-based cancer immunotherapy studies, highlighting the benefits and limitations of the current methods, and discuss new concepts and future directions of the field.

3D Cell Models in Radiobiology: Improving the Predictive Value of In Vitro Research

Cancer is intrinsically complex, comprising both heterogeneous cellular composition and extracellular matrix. In vitro cancer research models have been widely used in the past to model and study cancer. Although two-dimensional (2D) cell culture models have traditionally been used for cancer research, they have many limitations, such as the disturbance of interactions between cellular and extracellular environments and changes in cell morphology, polarity, division mechanism, differentiation and cell motion. Moreover, 2D cell models are usually monotypic. This implies that 2D tumor models are ineffective at accurately recapitulating complex aspects of tumor cell growth, as well as their radiation responses. Over the past decade there has been significant uptake of three-dimensional (3D) in vitro models by cancer researchers, highlighting a complementary model for studies of radiation effects on tumors, especially in conjunction with chemotherapy. The introduction of 3D cell culture approaches aims to model in vivo tissue interactions with radiation by positioning itself halfway between 2D cell and animal models, and thus opening up new possibilities in the study of radiation response mechanisms of healthy and tumor tissues.

Harnessing three-dimensional (3D) cell culture models for pulmonary infections: State of the art and future directions.

Pulmonary infections have been a leading etiology of morbidity and mortality worldwide. Upper and lower respiratory tract infections have multifactorial causes, which include bacterial, viral, and rarely, fungal infections. Moreover, the recent emergence of SARS-CoV-2 has created havoc and imposes a huge healthcare burden. Drug and vaccine development against these pulmonary pathogens like respiratory syncytial virus, SARS-CoV-2, Mycobacteria, etc., requires a systematic set of tools for research and investigation. Currently, in vitro 2D cell culture models are widely used to emulate the in vivo physiologic environment. Although this approach holds a reasonable promise over pre-clinical animal models, it lacks the much-needed correlation to the in vivo tissue architecture, cellular organization, cell-to-cell interactions, downstream processes, and the biomechanical milieu. In view of these inadequacies, 3D cell culture models have recently acquired interest. Mammalian embryonic and induced pluripotent stem cells may display their remarkable self-organizing abilities in 3D culture, and the resulting organoids replicate important structural and functional characteristics of organs such the kidney, lung, gut, brain, and retina. 3D models range from scaffold-free systems to scaffold-based and hybrid models as well. Upsurge in organs-on-chip models for pulmonary conditions has anticipated encouraging results. Complexity and dexterity of developing 3D culture models and the lack of standardized working procedures are a few of the setbacks, which are expected to be overcome in the coming times. Herein, we have elaborated the significance and types of 3D cell culture models for scrutinizing pulmonary infections, along with the in vitro techniques, their applications, and additional systems under investigation.

Cell Line Culture in Pharmaceutical Development and Application: A Review

The use of conventional animal testing to determine how medications affect a biological system comes with many challenges. In recent years, a variety of techniques to achieve these goals were presented, one of these is cell line creation technology that has dramatically increased in usefulness and efficiency of drug discovery researches. Cell culture is the term used to describe the removal of cells from an animal or plant and their subsequent cultivation in a lab setting. The Caco-2 model is commonly used in the early stages of drug discovery to make decisions about the permeability and/or absorption of tested chemicals. It is obvious that novel 3D cell culture models offer enormous potential for disease modeling and medication efficacy and safety assessment. However, the challenges provided by the inherent traits of Caco-2 cell variants and inter-laboratory methods have led to the development of irreducible data. These restrictions have an impact on the extrapolation of preclinical research results to clinical investigations on drug-drug and herbal-drug interactions.

A combined computational and functional approach identifies IGF2BP2 as a driver of chemoresistance in a wide array of pre-clinical models of colorectal cancer

AimChemoresistance is a major cause of treatment failure in colorectal cancer (CRC) therapy. In this study, the impact of the IGF2BP family of RNA-binding proteins on CRC chemoresistance was investigated using in silico, in vitro, and in vivo approaches.MethodsGene expression data from a well-characterized cohort and publicly available cross-linking immunoprecipitation sequencing (CLIP-Seq) data were collected. Resistance to chemotherapeutics was assessed in patient-derived xenografts (PDXs) and patient-derived organoids (PDOs). Functional studies were performed in 2D and 3D cell culture models, including proliferation, spheroid growth, and mitochondrial respiration analyses.ResultsWe identified IGF2BP2 as the most abundant IGF2BP in primary and metastastatic CRC, correlating with tumor stage in patient samples and tumor growth in PDXs. IGF2BP2 expression in primary tumor tissue was significantly associated with resistance to selumetinib, gefitinib, and regorafenib in PDOs and to 5-fluorouracil and oxaliplatin in PDX in vivo. IGF2BP2 knockout (KO) HCT116 cells were more susceptible to regorafenib in 2D and to oxaliplatin, selumitinib, and nintedanib in 3D cell culture. Further, a bioinformatic analysis using CLIP data suggested stabilization of target transcripts in primary and metastatic tumors. Measurement of oxygen consumption rate (OCR) and extracellular acidification rate (ECAR) revealed a decreased basal OCR and an increase in glycolytic ATP production rate in IGF2BP2 KO. In addition, real-time reverse transcriptase polymerase chain reaction (qPCR) analysis confirmed decreased expression of genes of the respiratory chain complex I, complex IV, and the outer mitochondrial membrane in IGF2BP2 KO cells.ConclusionsIGF2BP2 correlates with CRC tumor growth in vivo and promotes chemoresistance by altering mitochondrial respiratory chain metabolism. As a druggable target, IGF2BP2 could be used in future CRC therapy to overcome CRC chemoresistance.

Selenylated Imidazo [1,2-a]pyridine Induces Apoptosis and Oxidative Stress in 2D and 3D Models of Colon Cancer Cells.

Colon cancer incidence rates are increasing annually, a scenario aggravated by genetic and epigenetic alterations that promote drug resistance. Recent studies showed that novel synthetic selenium compounds are more efficient and less toxic than conventional drugs, demonstrating biocompatibility and pro-oxidant effects on tumor cells. This study aimed to investigate the cytotoxic effect of MRK-107, an imidazo [1,2- a]pyridine derivative, in 2D and 3D cell culture models of colon cancer (Caco-2 and HT-29). Sulforhodamine B results revealed a GI50 of 2.4 µM for Caco-2, 1.1 µM for HT-29, and 22.19 µM for NIH/3T3 in 2D cultures after 48 h of treatment. Cell recovery, migration, clonogenic, and Ki-67 results corroborated that MRK-107 inhibits cell proliferation and prevents cell regeneration and metastatic transition by selectively reducing migratory and clonogenic capacity; non-tumor cells (NIH/3T3) re-established proliferation in less than 18 h. The oxidative stress markers DCFH-DA and TBARS revealed increased ROS generation and oxidative damage. Caspases-3/7 are activated and induce apoptosis as the main mode of cell death in both cell models, as assessed by annexin V-FITC and acridine orange/ethidium bromide staining. MRK-107 is a selective, redox-active compound with pro-oxidant and pro-apoptotic properties and the capacity to activate antiproliferative pathways, showing promise in anticancer drug research.

Recent and advanced therapy for oral cancer.

Oral cancer is a common and deadly kind of tissue invasion, has a high death rate, and may induce metastasis that mostly affects adults over the age of 40. Most in vitro traditional methods for studying cancer have included the use of monolayer cell cultures and several animal models. There is a worldwide effort underway to reduce the excessive use of laboratory animals since, although being physiologically adequate, animal models rarely succeed in exactly mimicking human models. 3D culture models have gained great attention in the area of biomedicine because of their capacity to replicate parent tissue. There are many benefits to using a drug delivery approach based on nanoparticles in cancer treatment. Because of this, in vitro test methodologies are crucial for evaluating the efficacy of prospective novel nanoparticle drug delivery systems. This review discusses current advances in the utility of 3D cell culture models including multicellular spheroids, patient-derived explant cultures, organoids, xenografts, 3D bioprinting, and organoid-on-a-chip models. Aspects of nanoparticle-based drug discovery that have utilized 2D and 3D cultures for a better understanding of genes implicated in oral cancers are also included in this review.

Preclinical Models of Laryngeal Papillomavirus Infection: A Scoping Review.

Laryngeal human papillomavirus (HPV) infection causes recurrent respiratory papillomatosis (RRP) and accounts for up to 25% of laryngeal cancers. Lack of satisfactory preclinical models is one reason that treatments for these diseases are limited. We sought to assess the literature describing preclinical models of laryngeal papillomavirus infection. PubMed, Web of Science, and Scopus were searched from the inception of database through October 2022. Studies searched were screened by two investigators. Eligible studies were peer-reviewed, published in English, presented original data, and described attempted models of laryngeal papillomavirus infection. Data examined included type of papillomavirus, infection model, and results including success rate, disease phenotype, and viral retention. After screening 440 citations and 138 full-text studies, 77 studies published between 1923 and 2022 were included. Models used low-risk HPV or RRP (n = 51 studies), high-risk HPV or laryngeal cancer (n = 16), both low- and high-risk HPV (n = 1), and animal papillomaviruses (n = 9). For RRP, 2D and 3D cell culture models and xenografts retained disease phenotypes and HPV DNA in the short term. Two laryngeal cancer cell lines were consistently HPV-positive in multiple studies. Animal laryngeal infections with animal papillomaviruses resulted in disease and long-term retention of viral DNA. Laryngeal papillomavirus infection models have been researched for 100 years and primarily involve low-risk HPV. Most models lose viral DNA after a short duration. Future work is needed to model persistent and recurrent diseases, consistent with RRP and HPV-positive laryngeal cancer. NA Laryngoscope, 133:3256-3268, 2023.

(149) PD.SPHERE, a Novel Three-dimension Cellular Model for Peyronie’s Disease via ‘Microgravity’ Condition: The New Era of in vitro Cell Culture-based Model for PD

Abstract Introduction Peyronie's disease (PD) is a common problem that affects 4-13% of the male population and results in a significant decline in patient and partner quality of life. Currently, in vitro monolayer fibroblast culture and animal models are actively used to study pathogenesis and treatments. However, both models are not a great pathophysiological representative for human PD due to the lack of cellular architecture and limited insight into the PD mechanism. Objective We aimed to develop a three-dimensional (3D) cellular model to reveal the PD pathogenesis mechanism and perhaps use this model as a treatment screening tool. Methods Human PD fibroblasts isolated from PD patients during surgery were cultured in various non-adhesive culture plates under the 'microgravity' condition. Complete media (DMEM+10% FBS+2mM L-glutamine) with and without TGF-β supplement was used to optimize the conditions for the PD.SPHERE, a 3D cell culture model of PD fibroblasts. Molecular probes against nucleus, actin, vimentin (VIM) and smooth muscle actin (SMA) were used to study the morphology and expression of molecular markers. Confocal-microscopic analyses were performed to obtain the morphological snapshots of and molecular data of the PD.SPHERE. Results We successfully developed a 3D cell culture (spheroid) model from human PD fibroblasts with our defined conditions. The PD spheroids were formed individually in each vessel of a 96-well plate coated with a non-adhesive substance. A PD.SPHERE was made in each well in a 96-well plate from three different individuals. Moreover, the size and circularity of spheroids were consistent across the plate. Although TGF-β supplemented condition significantly increased the cell division capability of the PD fibroblasts in the monolayer model, this supplementation was not necessary for our 3D model since TGF-β did not significantly increase the size and circularity of the 3D model. Despite the spheroids' increases in cell density over the culturing period, TGF-β did not affect the cell density in the 3D-cellular structure. Throughout the PD.SPHERE architecture, it also expressed SMA and VIM, the intracellular skeletal markers. Conclusions In conclusion, our model is consistent, reproducible and morphologically relevant to a PD plaque. Our model also demonstrates that we have the potential to produce high throughput treatment screening platforms for PD. Additionally, the PD.SPHERE platform is personalized and customizable to the specific individual; thus, our model indicated the potential to develop this platform for personalized treatment planning. However, signature gene expression and physiological and immunological information (i.e., collagen production, extracellular matrix organization, cellular expression of tight junctions, chemokines, and cytokines) should be further collected to verify the pathophysiological, immunological and treatment response for this model. Disclosure No

3D porous sodium alginate-silk fibroin composite bead based in vitro tumor model for screening of anti-cancer drug and induction of magneto-apoptosis

The development of 3D scaffold-based in vitro tumor models can help to address the limitations of cell culture and animal models for designing and screening of anticancer drugs. In this study, in vitro 3D tumor models using sodium alginate (SA) and sodium alginate/silk fibroin (SA/SF) porous beads were developed. The beads were non-toxic and A549 cells had a high tendency to adhere, proliferate, and form tumor-like aggregates within SA/SF beads. The 3D tumor model based on these beads had better efficacy for anti-cancer drug screening than the 2D cell culture model. Additionally, the SA/SF porous beads loaded with superparamagnetic iron oxide nanoparticles were used to explore their magneto-apoptosis ability. The cells exposed to a high magnetic field were more likely to undergo apoptosis than those exposed to a low magnetic field. These findings suggest that the SA/SF porous beads and SPIONs loaded SA/SF porous beads-based tumor models could be useful for drug screening, tissue engineering, and mechanobiology studies.

3D culture of fibroblasts and neuronal cells on microfabricated free-floating carriers

3D cell culture is a relatively recent trend in biomedical research for artificially mimicking in vivo environment and providing three dimensions for the cells to grow in vitro, particularly with regard to surface-adherent mammalian cells. Different cells and research objectives require different culture conditions which has led to an increase in the diversity of 3D cell culture models. In this study, we show two independent on-carrier 3D cell culture models aimed at two different potential applications. Firstly, micron-scale porous spherical structures fabricated from poly (lactic-co-glycolic acid) or PLGA are used as 3D cell carriers so that the cells do not lose their physiologically relevant spherical shape. Secondly, millimetre-scale silk fibroin structures fabricated by 3D inkjet bioprinting are used as 3D cell carriers to demonstrate cell growth patterning in 3D for use in applications which require directed cell growth. The L929 fibroblasts demonstrated excellent adherence, cell-division and proliferation on the PLGA carriers, while the PC12 neuronal cells showed excellent adherence, proliferation and spread on the fibroin carriers without any evidence of cytotoxicity from the carriers. The present study thus proposes two models for 3D cell culture and demonstrates, firstly, that easily fabricable porous PLGA structures can act as excellent cell carriers for aiding cells easily retain their physiologically relevant 3D spherical shape in vitro, and secondly, that 3D inkjet printed silk fibroin structures can act as geometrically-shaped carriers for 3D cell patterning or directed cell growth in vitro. While the ‘fibroblasts on PLGA carriers’ model will help achieve more accurate results than the conventional 2D culture in cell research, such as drug discovery, and cell proliferation for adoptive cell transfer, such as stem cell therapy, the ‘neuronal cells on silk fibroin carriers’ model will help in research requiring patterned cell growth, such as treatment of neuropathies.

Establishment of a novel protocol for formalin-fixed paraffin-embedded organoids and spheroids.

Three-dimensional (3D) cell culture models such as spheroids and organoids are widely used in the field of experimental biology. To analyze these 3D experimental models, formalin-fixed paraffin-embedded (FFPE) sections are superior to whole-mount imaging for some experimental purposes, such as exploring samples with a depth limitation of primary antibody penetration immunohistochemically. However, tiny 3D cell culture samples are difficult to embed in paraffin and acquire appropriate sections. In this report, we optimized a protocol of paraffin embedding for spheroids and organoids. In addition, we compared FFPE sections with frozen sections in ratio of sample collection and section condition after staining, and could reproduce improved results reliably. The protocol we established could be widely used in many laboratories and become a useful technique for analyzing spheroids and organoids.

Characterisation of a Three-Dimensional (3D) Cell Culture Model of Adrenocortical Carcinoma

Searchable abstracts of presentations at key conferences in endocrinology ISSN 1470-3947 (print) | ISSN 1479-6848 (online)

Protective Alzheimer's disease-associated APP A673T variant predominantly decreases sAPPβ levels in cerebrospinal fluid and 2D/3D cell culture models

The rare A673T variant was the first variant found within the amyloid precursor protein (APP) gene conferring protection against Alzheimer's disease (AD). Thereafter, different studies have discovered that the carriers of the APP A673T variant show reduced levels of amyloid beta (Aβ) in the plasma and better cognitive performance at high age. Here, we analyzed cerebrospinal fluid (CSF) and plasma of APP A673T carriers and control individuals using a mass spectrometry-based proteomics approach to identify differentially regulated targets in an unbiased manner. Furthermore, the APP A673T variant was introduced into 2D and 3D neuronal cell culture models together with the pathogenic APP Swedish and London mutations. Consequently, we now report for the first time the protective effects of the APP A673T variant against AD-related alterations in the CSF, plasma, and brain biopsy samples from the frontal cortex. The CSF levels of soluble APPβ (sAPPβ) and Aβ42 were significantly decreased on average 9–26% among three APP A673T carriers as compared to three well-matched controls not carrying the protective variant. Consistent with these CSF findings, immunohistochemical assessment of cortical biopsy samples from the same APP A673T carriers did not reveal Aβ, phospho-tau, or p62 pathologies. We identified differentially regulated targets involved in protein phosphorylation, inflammation, and mitochondrial function in the CSF and plasma samples of APP A673T carriers. Some of the identified targets showed inverse levels in AD brain tissue with respect to increased AD-associated neurofibrillary pathology. In 2D and 3D neuronal cell culture models expressing APP with the Swedish and London mutations, the introduction of the APP A673T variant resulted in lower sAPPβ levels. Concomitantly, the levels of sAPPα were increased, while decreased levels of CTFβ and Aβ42 were detected in some of these models. Our findings emphasize the important role of APP-derived peptides in the pathogenesis of AD and demonstrate the effectiveness of the protective APP A673T variant to shift APP processing towards the non-amyloidogenic pathway in vitro even in the presence of two pathogenic mutations.

Recent advances of three-dimensional bioprinting technology in hepato-pancreato-biliary cancer models.

Hepato-pancreato-biliary (HPB) cancer is a serious category of cancer including tumors originating in the liver, pancreas, gallbladder and biliary ducts. It is limited by two-dimensional (2D) cell culture models for studying its complicated tumor microenvironment including diverse contents and dynamic nature. Recently developed three-dimensional (3D) bioprinting is a state-of-the-art technology for fabrication of biological constructs through layer-by-layer deposition of bioinks in a spatially defined manner, which is computer-aided and designed to generate viable 3D constructs. 3D bioprinting has the potential to more closely recapitulate the tumor microenvironment, dynamic and complex cell-cell and cell-matrix interactions compared to the current methods, which benefits from its precise definition of positioning of various cell types and perfusing network in a high-throughput manner. In this review, we introduce and compare multiple types of 3D bioprinting methodologies for HPB cancer and other digestive tumors. We discuss the progress and application of 3D bioprinting in HPB and gastrointestinal cancers, focusing on tumor model manufacturing. We also highlight the current challenges regarding clinical translation of 3D bioprinting and bioinks in the field of digestive tumor research. Finally, we suggest valuable perspectives for this advanced technology, including combination of 3D bioprinting with microfluidics and application of 3D bioprinting in the field of tumor immunology.

Fabrication of a Low-Cost Microfluidic Device for High-Throughput Drug Testing on Static and Dynamic Cancer Spheroid Culture Models

Drug development is a complex and expensive process from new drug discovery to product approval. Most drug screening and testing rely on in vitro 2D cell culture models; however, they generally lack in vivo tissue microarchitecture and physiological functionality. Therefore, many researchers have used engineering methods, such as microfluidic devices, to culture 3D cells in dynamic conditions. In this study, a simple and low-cost microfluidic device was fabricated using Poly Methyl Methacrylate (PMMA), a widely available material, and the total cost of the completed device was USD 17.75. Dynamic and static cell culture examinations were applied to monitor the growth of 3D cells. α-MG-loaded GA liposomes were used as the drug to test cell viability in 3D cancer spheroids. Two cell culture conditions (i.e., static and dynamic) were also used in drug testing to simulate the effect of flow on drug cytotoxicity. Results from all assays showed that with the velocity of 0.005 mL/min, cell viability was significantly impaired to nearly 30% after 72 h in a dynamic culture. This device is expected to improve in vitro testing models, reduce and eliminate unsuitable compounds, and select more accurate combinations for in vivo testing.

PRIMA-1 inhibits Y220C p53 amyloid aggregation and synergizes with cisplatin in hepatocellular carcinoma.

Hepatocellular carcinoma (HCC) is the third leading cause of cancer-related deaths worldwide. Although many therapeutic options are available, several factors, including the presence of p53 mutations, impact tumor development and therapeutic resistance. TP53 is the second most frequently mutated gene in HCC, comprising more than 30% of cases. Mutations in p53 result in the formation of amyloid aggregates that promote tumor progression. The use of PRIMA-1, a small molecule capable of restoring p53, is a therapeutic strategy to pharmacologically target the amyloid state mutant p53. In this study, we characterize an HCC mutant p53 model for the study of p53 amyloid aggregation in HCC cell lines, from in silico analysis of p53 mutants to a 3D-cell culture model and demonstrate the unprecedented inhibition of Y220C mutant p53 aggregation by PRIMA-1. In addition, our data show beneficial effects of PRIMA-1 in several "gain of function" properties of mutant-p53 cancer cells, including migration, adhesion, proliferation, and drug resistance. We also demonstrate that the combination of PRIMA-1 and cisplatin is a promising approach for HCC therapy. Taken together, our data support the premise that targeting the amyloid-state of mutant p53 may be an attractive therapeutic approach for HCC, and highlight PRIMA-1 as a new candidate for combination therapy with cisplatin.