Phenyl Research Articles

Large-scale and facile fabrication of phenyl-containing silicone foam materials with lightweight, wide-temperature flexibility and tunable pore structure for exceptional thermal insulation

Silicone foam materials with unique inorganic/organic molecular networks and porous structures are widely used in many emerging fields from aerospace to new energy fields. However, current silicone foam materials still show some limitations, such as the relatively high-density values of >200 mg cm−3, complex fabricating process and difficulty in tailoring pore structure. Herein, we report a large-scale and facile fabricating strategy to prepare phenyl-containing silicone foam materials (PhSiRF) with ultra-lightweight feature, tunable pore structure, and excellent wide-temperature mechanical flexibility. Interestingly, the presence of phenyl groups onto the Si–O–Si backbone tailors the chemical foaming rate probably due to the steric hindrance effect, thus producing tunable pore size distributions in the range of 180–500 μm. Typically, the PhSiRF with 50 % phenyl groups not only shows a very low density of ∼100 mg cm−3, superior to previous silicone foams and composites, but also exhibits wide-temperature flexibility (stable compressive strain of 80 % from −90 to 210 °C) and excellent thermal insulation performance, which outperforms those of conventional polymer foams including polyurethane, polyethylene and melamine foams. Based on the structure observation and theory analysis, the influence of different pore morphological structures on the thermal insulation performance is discussed and demonstrated. Clearly, this work provides a new yet simple method for developing high-performance silicone rubber foam materials for promising thermal insulation applications.

Turn-On Solid-State Fluorescent Determination of Zinc Ion by Quinoline-Based Covalent Organic Framework.

A new quinoline-based COF (covalent organic framework), obtained by Povarov reaction, containing 2,6-diisopropylphenyl moieties as substituents over the heterocyclic ring is described for detecting Zn2+ in aqueous solution. The introduction of the mentioned bulky phenyl rings into the network favors an increase of the distance between the reticular sheets and their arrangement, obtaining a new material with an alternating AB type stacking. The new material exhibits good selectivity to detect Zn2+ by fluorescence emission in aqueous solutions up to a concentration of 1.2 × 10-4m of the metal ion. In order to have a deeper insight into the interaction between the COF and the zinc cation, a thorough spectroscopical, microscopical, and theoretical study is also presented and discussed in this communication.

Linear polyborosiloxane for improving the flame-retardancy of cyanate ester resin

The increasing demands for electronic packing materials necessitate stringent criteria for the overall properties of cyanate ester (CE) resins. In this work, a novel linear polyborosiloxane with a distinctive organic-inorganic hybrid Si–O–B backbone, featuring functional epoxy and phenyl groups (denoted as LPSi-B), was synthesized via a solvent- and catalyst-free one-pot polycondensation. Subsequently, the synthesized LPSi-B was co-crosslinked within the bisphenol A dicyanate ester (BADCy) thermoset network. The presence of abundant active epoxy groups in LPSi-B facilitated its involvement in the cyanate curing reaction, demonstrating excellent compatibility within the resin matrix. The resulting LPSi-B/BADCy composite not only exhibits outstanding mechanical properties but also demonstrates notable flame-retardant and dielectric characteristics. Specifically, the hybrid nature of LPSi-B, combining the flexibility of Si–O–B chains with the rigidity of side-chain phenyl groups, fosters intermolecular non-covalent π-π interactions directly linked to boron atoms, thus mitigating network polarization. Furthermore, the synergistic flame-retardant effect arising from boron and silicon components was harnessed to achieve halogen-free, phosphorus-free, and environmentally friendly fire safety outcomes. This innovative design ensures exceptional compatibility and interface bonding between LPSi-B and the polymer matrix, thereby endowing cyanate ester resin with superior comprehensive performance suitable for advanced applications in wave-transparent and electronic packing materials.

Comprehensive Study of Equilibrium Structure of Trans-Azobenzene: Gas Electron Diffraction and Quantum Chemical Calculations

The geometrical re parameters of trans-azobenzene (E-AB) free molecule were refined by gas electron diffraction (GED) method using available experimental data obtained previously by S. Konaka and coworkers. Structural analysis was carried out by various techniques. First of all, these included the widely used molecular orbital constrained gas electron diffraction method and regularization method. The results of the refinements using different models were also compared—a semirigid model, three variants of one-dimensional dynamic models, and a two-dimensional pseudoconformer model. Several descriptions have been used due to the fact that E-AB has a shallow potential energy surface along the rotation coordinates of phenyl groups. Despite this, it turned out that the semirigid model is suitable for use for E-AB and allows good agreement with experimental data to be achieved. According to the results of GED structural analysis, coupled with the results of DLPNO-CCSD(T0) calculations, E-AB has a planar structure. Based only on GED data, it is impossible to unambiguously determine the rotational angle of the phenyl group due to the facts that (i) with rotation over a wide range of angles, the bonded distances in the molecule change insignificantly and (ii) potential function in a structural analysis within a dynamic model is not determined with the necessary accuracy. This work also examines the sensitivity of the GED method to structural changes caused by trans-cis isomerization. The paper also analyzes the applicability of different variants of density functional theory (DFT) calculations in GED structural analysis using E-AB as an example. There are not enough similar methodological works in the literature. This experimental and methodological information is especially important and relevant for planning and implementing GED experiments and corresponding processing of the results for azobenzene derivatives, in which the conformer and isomeric diversity are even more complicated due to the presence of different substituents.

Interfacial molecular structure and orientation evolution of the polystyrene under confinement during annealing revealed by sum frequency generation vibrational spectroscopy

The geometrical confinement directly affects many crucial properties of polymer thin films by interfacial interactions. A key to understanding the role of these interfacial interactions is to specifically probe the confined interface at the molecular level and in situ. However, the direct and nondestructive detection of interfacial polymer structures under confinement is very difficult. In this study, specific interface-sensitive sum frequency generation (SFG) spectroscopy was applied to study the deuterated PS (d8-PS) film confined between hydrogenated poly (methyl methacrylate) (PMMA) films at the molecular level and in situ. The results showed that the ordering/orientation of the PS chain (backbone and phenyl group) evolved at the buried d8-PS/PMMA interface during annealing. The tilt angle of the PS phenyl group increased while the twist angle decreased with elevated annealing temperature. Both overall SFG ssp and ppp intensities decreased after annealing at 433 K for 24 h, indicating that PS chains entangled with or penetrated the PMMA chains at the confined interface. This study qualitatively and quantitatively revealed the interfacial structure and structural evolution of the PS chain confined between PMMA films in situ during annealing, which is beneficial to the molecular-level understanding of the interfacial chain conformational relaxation of polymers under confinement.

Synthesis of inverse push-pull coumarin dyes and their application as solvatochromic probes and labelling agents for bacterial cell membranes

Coumarin derivatives have been widely employed across a great number of applications, such as laser dyes, bioimaging or chemossensors, owing to their strong fluorescence and high-quantum yields. These properties are highly tunable through structural modification, namely by the inclusion of electron-withdrawing groups (EWG) and electron-donating groups (EDG) at positions 3 and 7 of the coumarin scaffold, respectively. Comparatively, there aren't many reports of EDGs being employed at position 3, prompting us to investigate this new class of potential fluorophores.We undertook the synthesis of three novel ethynyl-linked aminophenyl-coumarin dyes, employing a key Sonogashira-coupling reaction to introduce the electron-rich tertiary aniline moiety. Two different amine donors were used, diphenylamino (coumarins A and B) and dimethylamino (coumarin C), as well as two alkoxy substituents, dibenzyloxy (A and C) and methylenedioxy (B), in the phenyl ring of the coumarin. All dyes show strong emission and significant positive solvatochromism. Additionally, they were employed as staining agents for the cellular membrane of S. pneumoniae, a Gram-positive bacterial pathogen. None of the three derivatives presented cytotoxic effects. Only A and B successfully labelled the bacterial membrane. In the case of B a very similar staining pattern and performance to that of standard dye Nile Red was observed, while A seemed to possess a more selective distribution.

Ultrafast planarization of photoexcited ligands in metal–organic frameworks gates charge transfer to promote photocatalysis

Metal–organic frameworks (MOFs) have emerged as a highly tunable class of porous materials with wide-ranging applications from gas capture to photocatalysis. Developing these exciting properties to their fullest extent requires a thorough mechanistic understanding of the structure–function relationships. We implement an ultrafast spectroscopic toolset, femtosecond transient absorption and femtosecond stimulated Raman spectroscopy (FSRS), to elucidate the correlated electronic and vibrational dynamics of two isostructural 1,3,6,8-tetrakis(p-benzoic acid)pyrene (TBAPy)-based MOFs, which manifest drastically different photocatalytic behaviors. Systematic comparisons between the M3+-TBAPy MOFs and bare ligands in various environments reveal the unproductive dimer formation in Al-TBAPy, whereas Sc-TBAPy is dominated by a catalytically active charge-transfer (CT) process. Two ground-state FSRS marker bands of the TBAPy ligand at ∼1267 and 1617 cm−1 probe the chromophore environment at thermal equilibrium. For comparison, the excited-state FSRS of Sc-TBAPy suspended in neutral water unveils a key ∼300 fs twisting motion of the TBAPy peripheral phenyl groups toward planarity, promoting an efficient generation of CT species. This motion also exhibits high sensitivity to solvent environment, which can be a useful probe; we also showed the CT variation for ultrafast dynamics of Sc-TBAPy in the glyphosate aqueous solution. These new insights showcase the power of table-top tunable FSRS methodology to delineate structural dynamics of functional molecular systems in action, including MOFs and other photosensitive “nanomachines.” We expect the uncovered ligand motions (ultrafast planarization) to enable the targeted design of new MOFs with improved CT state characteristics (formation and lifetime) to power applications, including photocatalysis and herbicide removal from waterways.

Design, Synthesis and Biological Activity of Novel Methoxy- and Hydroxy-Substituted N-Benzimidazole-Derived Carboxamides.

This work presents the design, synthesis and biological activity of novel N-substituted benzimidazole carboxamides bearing either a variable number of methoxy and/or hydroxy groups. The targeted carboxamides were designed to investigate the influence of the number of methoxy and/or hydroxy groups, the type of substituent placed on the N atom of the benzimidazole core and the type of substituent placed on the benzimidazole core on biological activity. The most promising derivatives with pronounced antiproliferative activity proved to be N-methyl-substituted derivatives with hydroxyl and methoxy groups at the phenyl ring and cyano groups on the benzimidazole nuclei with selective activity against the MCF-7 cell line (IC50 = 3.1 μM). In addition, the cyano-substituted derivatives 10 and 11 showed strong antiproliferative activity against the tested cells (IC50 = 1.2-5.3 μM). Several tested compounds showed significantly improved antioxidative activity in all three methods compared to standard BHT. In addition, the antioxidative activity of 9, 10, 32 and 36 in the cells generally confirmed their antioxidant ability demonstrated in vitro. However, their antiproliferative activity was not related to their ability to inhibit oxidative stress nor to their ability to induce it. Compound 8 with two hydroxy and one methoxy group on the phenyl ring showed the strongest antibacterial activity against the Gram-positive strain E. faecalis (MIC = 8 μM).

Chiral zwitterionic stationary phases based on Cinchona alkaloids and dipeptides: Application in chiral separation of dipeptides under reversed phase conditions

Chromatographic behavior of novel chiral stationary phases with bonded selectors based on Cinchona alkaloids modified with dipeptides was studied using dipeptides as probe molecules. Buffer-free and salt containing hydro-organic solutions were used as the mobile phases. The selectors exhibit pseudoenantiomeric behavior with respect to the L/D or LL/DD enantiomers and do not behave so with respect to the LD/DL enantiomers. The alkaloid part of the selectors is the driver of enantioselectivity, while the dipeptide substituent plays a modulating role. The quinidine-based selectors demonstrate stronger adsorption affinity and higher enantioselectivity as compared to the quinine-based selectors. The dipeptide analytes containing a glycyl fragment are weaker retained and their enantiomers are worse separated comparing to dipeptides with both units being larger amino acids. Moreover, a phenyl group in the structure of a dipeptide analyte facilitates enantioseparation. The effect of the mobile phase composition on retention depends on the hydrophobicity of an analyte. Hydrophobic dipeptides are better eluted by methanol-rich solvents, hydrophilic dipeptides are better eluted with water-rich solvents, and dipeptides with an intermediate hydrophobicity demonstrate a U-shaped or more complicated dependence of the retention factor on the percentage of methanol. Even a small buffer addition to the mobile phase decreases retention, but the ion-exchange mechanism was not confirmed. The effect of an electrolyte is rather due to the shielding of the charged groups of the selector reducing thereby electrostatic interaction between the selector and analyte. Efficiency of the novel columns is comparable to that of other brush-type chiral columns, the highest achieved number of the theoretical plates per 1 m varying between 30,000 and 40,000.

Insecticidal effect of new synthesized chalcone derivatives on Caribbean fruit fly, Anastrepha suspensa.

In this present study, new chalcone derivatives were synthesized from 4-aminoacetophenone, which were confirmed by spectroscopic methods. The toxic risks of chalcones to humans and the environment were investigated by a web-based platform called ADMETlab. With this program, the possible toxic effects of the compounds on liver, respiratory system, and eyes were evaluated. For the topical insecticidal activity, adult female Caribbean fruit fly, Anastrepha suspensa, was targeted. Results of the toxicity tests showed that chalcone derivatives are effective against female A.suspensa. Among the synthesized chalcones, 1-(4-cinnamoylphenyl)-3-(p-tolyl)urea (2) exhibited the greatest insecticidal activity, resulting in 73 % mortality at 100 µg/fly after 24 h, whereas other derivatives showed less than 30 % mortality. Our results demonstrate that insecticidal activity may be modulated by the presence of a certain phenyl ring in the structure of derivative 2 and, therefore, has potential for design of efficient chemicals for tephritid fruit fly management.

Imidazole-Derived Alkyl and Aryl Ethers: Synthesis, Characterization, In Vitro Anticancer and Antioxidant Activities, Carbonic Anhydrase I-II Inhibition Properties, and In Silico Studies.

Imidazole derivatives display extensive applications in pharmaceutical chemistry and have been investigated as bioactive compounds for medicinal chemistry. In this study, besides the starting materials (3a-c and 4a-c), synthesis, characterization, and biological activity studies were conducted on a total of 18 compounds, nine of which are known and the other nine are original. The compounds investigated in the study are a series of alkyl (7-15) and aryl (16-24) ether derivatives bearing substituted phenyl and imidazole rings, which were characterized using various methods including 1H NMR, 13C NMR, FT-IR analysis, elemental analysis, and mass spectroscopy. Computer-aided drug design studies have been carried out to predict the biological activities of compounds. Besides DFT calculations, the binding affinities of the compounds to EGFR, VEGFR2, FGFR1, HSP90, hCA I, and hCA II were investigated. Additionally, drug-likeness and ADME analyses were performed on the compounds. Anticancer, antioxidant, and enzyme inhibition activity tests were performed in biological activity studies on the synthesized compounds. Among the synthesized compounds, compounds 17 and 19-24 generally exhibited inhibition profiles against the widespread cytosolic hCA I isozyme with IC50 values ranging from 4.13 to 15.67 nM and cytosolic hCA II isozyme with IC50 values ranging from 5.65 to 14.84 nM. L929 (mouse fibroblast cell line) was used as the control healthy cell line, and MCF7 (breast cancer), C6 (rat glioblastoma), and HT-29 (colon cancer) cells were used in cell culture studies as cancer cell lines. Before the study on cancer cells, all compounds were examined on healthy cells, and their cytotoxicity was determined. As a result of these data, studies continued with six compounds determined to be nontoxic. On cancerous cells, it was determined that compounds 3a, 3b, 4a, 4b, 4c, and 7 had cytotoxic effects on both colon cancer and brain tumors. It was found that compound 3b had a more toxic effect than cisplatin on the glioma cell line with an IC50 value of 10.721 ± 0.38 μM, and compound 3a had a more toxic effect on the colon cancer cell line with an IC50 value of 20.88 ± 1.02 μM. However, it was determined that the same compounds did not have a statistically significant effect on breast cancer. Flow cytometry studies also showed that when the IC50 dose of compound 3b was applied to the C6 cell line, the cells tended to early and late apoptosis. Additionally, it has been shown by flow cytometry that the cell cycle stops in the G0/G1 phase. A similar effect was observed in the colon cancer cell line with compound 3a. Compound 3b caused early and late apoptosis of the colon cancer cell line with the applied IC50 dose and stopped the cell cycle in the G0/G1 phase. Finally, the FRAP method studied all synthesized compounds' antioxidant effects. According to the measured antioxidant power results, it was determined that no compound had a more effective reducing power than vitamin E.

Dehydrogenative synthesis of N-functionalized 2-aminophenols from cyclohexanones and amines: Molecular complexities via one-shot assembly.

Polyfunctionalized arenes are privileged structural motifs in both academic and industrial chemistry. Conventional methods for accessing this class of chemicals usually involve stepwise modification of phenyl rings, often necessitating expensive noble metal catalysts and suffering from low reactivity and selectivity when introducing multiple functionalities. We herein report dehydrogenative synthesis of N-functionalized 2-aminophenols from cyclohexanones and amines. The developed reaction system enables incorporating amino and hydroxyl groups into aromatic rings in a one-shot fashion, which simplifies polyfunctionalized 2-aminophenol synthesis by circumventing issues associated with traditional arene modifications. The wide substrate scope and excellent functional group tolerance are exemplified by late-stage modification of complex natural products and pharmaceuticals that are unattainable by existing methods. This dehydrogenative protocol benefits from using 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) as oxidant that offers interesting chemo- and regio-selective oxidation processes. More notably, the essential role of in situ generated water is disclosed, which protects aliphatic amine moieties from overoxidation via hydrogen bond-enabled interaction.

Some Terminally Alkenyl-substituted Porphyrins: Synthesis and Attempts of Heck Reaction Leading to Porphyrin-Azulene Dyads

Abstract:: The synthesis of meso-tetraphenylporphyrin derivatives, double functionalized in one of the phenyl rings (with a nitro group and carbon substituents), is described. 5-(4- Nitroaryl)-10,15,20-triarylporphyrinates react, in the presence of a base (t-BuOK), with carbanions containing a leaving group at the carbanionic center to give products of substitution of hydrogen at ortho-position to the nitro group via vicarious nucleophilic substitution scheme. Their alkylation with allyl bromide or 4-bromobut-1-en (t-BuOK/DMF, at 0-5°C) leads to porphyrins bearing side alkyl chain with a terminal double bond in yields of up to 82%. The double-substituted intermediates are very convenient substrates for Heck cross-coupling reactions. In this study, the synthesis of porphyrin–azulene dyads is reported. In some cases, the formation of highly conjugated systems is observed, with moderate yield. Their structures are interesting from both the porphyrin and azulene point of view.

N-Bu4NI/K2S2O8 Mediated Csp2-Csp2 Bond Cleavage - Transformylation from p-Anisaldehyde to Primary Amides.

n-Bu4NI/K2S2O8 mediated transformylation from p-anisaldehyde to primary amides is reported. The mechanistic studies suggest the reaction occurs via a single electron transfer pathway. Based on the DFT electronic structure calculations of various reaction pathways, the most plausible mechanism involves the formation of a phenyl radical cation and an arenium ion as the key intermediates. It represents the first example where p-anisaldehyde is employed as a formyl source via a non-metal mediated Csp2-Csp2 bond cleavage.

Single‐Atom Titanium on Mesoporous Nitrogen, Oxygen‐Doped Carbon for Efficient Photo‐thermal Catalytic CO2 Cycloaddition by a Radical Mechanism

AbstractDeveloping efficient and earth‐abundant catalysts for CO2 fixation to high value‐added chemicals is meaningful but challenging. Styrene carbonate has great market value, but the cycloaddition of CO2 to styrene oxide is difficult due to the high steric hindrance and weak electron‐withdrawing ability of the phenyl group. To utilize clean energy (such as optical energy) directly and effectively for CO2 value‐added process, we introduce earth‐abundant Ti single‐atom into the mesoporous nitrogen, oxygen‐doped carbon nanosheets (Ti−CNO) by a two‐step method. The Ti−CNO exhibits excellent photothermal catalytic activities and stability for cycloaddition of CO2 and styrene oxide to styrene carbonate. Under light irradiation and ambient pressure, an optimal Ti−CNO produces styrene carbonate with a yield of 98.3 %, much higher than CN (27.1 %). In addition, it shows remarkable stability during 10 consecutive cycles. Its enhanced catalytic performance stems from the enhanced photothermal effect and improved Lewis acidic/basic sites exposed by the abundant mesopores. The experiments and theoretical simulations demonstrate the styrene oxide⋅+ and CO2⋅− radicals generated at the Lewis acidic (Tiδ+) and basic sites of Ti−CNO under light irradiation, respectively. This work furnishes a strategy for synthesizing advanced single‐atom catalysts for photo‐thermal synergistic CO2 fixation to high value products via a cycloaddition pathway.

In situ high‐quality LiF/Li3N inorganic and phenyl‐based organic solid electrolyte interphases for advanced lithium–oxygen batteries

AbstractLithium metal shows a great advantage as the most promising anode for its unparalleled theoretical specific capacity and extremely low electrochemical potential. However, uncontrolled lithium dendrite growth and severe side reactions of the reactive intermediates and organic electrolytes still limit the broad application of lithium metal batteries. Herein, we propose 4‐nitrobenzenesulfonyl fluoride (NBSF) as an electrolyte additive for forming a stable organic–inorganic hybrid solid electrolyte interphase (SEI) layer on the lithium surface. The abundance of lithium fluoride and lithium nitride can guarantee the SEI layer's toughness and high ionic conductivity, achieving dendrite‐free lithium deposition. Meanwhile, the phenyl group of NBSF significantly contributes to both the chemical stability of the SEI layer and the good adaptation to volume changes of the lithium anode. The lithium–oxygen batteries with NBSF exhibit prolonged cycle lives and excellent cycling stability. This simple approach is hoped to improve the development of the organic–inorganic SEI layer to stabilize the lithium anodes for lithium–oxygen batteries.

Biochemical and In Silico Studies on Triazole Derivatives as Tyrosinase Inhibitors: Potential Treatment of Hyperpigmentation Related Skin Disorders.

Tyrosinase is a versatile, glycosylated copper-containing oxidase enzyme that mainly catalyzes the biosynthesis of melanin in mammals. Its overexpression leads to the formation of excess melanin, resulting in hyperpigmentary skin disorders, such as dark spots, melasma, freckles, etc. Therefore, inhibition of tyrosinase is a therapeutic approach for the treatment of hyperpigmentation. The current study focused on evaluating tyrosinase inhibitory activities of triazole derivatives 1-20, bearing different substituents on the phenyl ring. 17 derivatives have shown a potent tyrosinase inhibition with IC50 values between 1.6 to 13 μM, as compared to the standard drug, i.e., kojic acid (IC50 = 24.1 ± 0.5 μM). Particularly, compounds 11 and 15 displayed 12 times more potent inhibitory effects than the kojic acid. The structure-activity relationship revealed that substituting halogens at the C-4 position of the benzene ring renders remarkable anti-tyrosinase activities. Compounds 1-3 and 8 showed a competitive type of inhibition, while compounds 5, 11, and 15 showed a non-competitive mode of inhibition. Next, we performed molecular docking analyses to study the binding modes and interactions between the ligands (inhibitors) and the active site of the tyrosinase enzyme (receptor). Besides this, we have assessed the toxicity profile of inhibitors on the BJ human fibroblast cell line. The majority of the newly identified tyrosinase inhibitors were found to be noncytotoxic. The results presented herein form the basis of further studies on triazole derivatives as potential drug leads against tyrosinase-related diseases.

Syntheses and Structure-Activity Relationship Studies of Antitumor Bicyclic Hexapeptide RA-VII Analogues

A series of antitumor bicyclic hexapeptide RA-VII analogues modified at residue 2, 3, or 6 were prepared by the chemical transformation of the hydroxy, methoxy, or carboxy groups or the aromatic rings of natural peptides RA-II, III, V, VII, and X. Analogues with modified side chains or peptide backbones, which cannot be prepared by the chemical transformation of their natural peptides, and newly isolated peptides from Rubia cordifolia roots were synthesized by using protected cycloisodityrosines prepared by the degradation of bis(thioamide) obtained from RA-VII or the diphenyl ether formation of boronodipeptide under the modified Chan-Lam coupling reaction conditions. Studies of the conformational features of the analogues and the newly isolated peptides and their relationships with cytotoxic activities against the HCT-116, HL-60, KATO-III, KB, L1210, MCF-7, and P-388 cell lines revealed the following: the methoxy group at residue 3 is essential for the potent cytotoxic activity; the methyl group at Ala-2 and Ala-4 but not at D-Ala-1 is required to establish the bioactive conformation; the N-methyl group at Tyr-5 is necessary for the peptides to adopt the active conformation preferentially; and the orientation of Tyr-5 and/or Tyr-6 phenyl rings has a significant effect on the cytotoxic activity.

Computational Study of the Antioxidative Potential of Substituted Hydroxy-2-arylbenzothiazole Derivatives

This study use density functional theory B3LYP/6-31+G(d) methods to examine theoretically the electrical and structural characteristics of substituted hydroxy-2-arylbenzothiazole derivatives, which contribute to their ability to scavenge free radicals. It was found that the antioxidant activities increase with small the energy gap ΔE (EL-EH), lower ionization potential (IP), lower hardness (η), higher softness (S), higher dipole moment, higher negative total energy of optimization and high the net charge. These values are interpreted with experimental equivalent antioxidant values. Two series of compounds, series one, compounds 1-6 (hydroxyl groups attached to aryl ring) and series two viz. compounds 7-10 (substituent to ortho-position of phenyl ring) were studied. It was observed that in series one, compound 6 with three hydroxy substituent had the lowest energy gap ΔE, lowest IP, lowest hardness (η), highest softness (S), highest dipole moment, highest total negative energy of optimization and compound 1 with no substituent had highest energy gap ΔE, highest IP, highest hardness (η), lowest softness (S), lowest dipole moment, lowest negative total energy of optimization. The results of the antioxidant activity are in the following order: 6 > 5 > 4 > 2 > 3 > 1. The introduction of the strongly electron-withdrawing substituent, –NO2 and –CN groups attached to phenyl ring of hydroxy-2-arylbenzothiazole nucleus improve the effect of antioxidant activity. On the basis of these findings, a novel antioxidant compound that possesses enhanced activity can be developed.

Phase Diagrams of Anthracene Derivatives in Pyridinium Ionic Liquids.

Crystal engineering for single crystallization of π-conjugated molecules has attracted much attention because of their electronic, photonic, and mechanical properties. However, reproducibility is a problem in conventional printing techniques because control of solvent evaporation is difficult. We investigated the phase diagrams of two anthracene derivatives in synthesized ionic liquids for non-volatile crystal engineering to determine the critical points for nucleation and crystal growth. Anthracene and 9,10-dibromoanthracene were used as representative π-conjugated molecules that form crystal structures with different packing types. Ionic liquids with an alkylpyridinium cation and bis(fluorosulfonyl)amide were good solvents for the anthracene derivatives from ca. 0 °C to 200 °C. The solubilities (critical points for crystal growth) of the anthracene derivatives in the ionic liquids reached the 100 mM level, which is similar to those in organic solvents. Ionic liquids with phenyl and octyl groups tended to show high-temperature dependence (a high dissolution entropy) with 9,10-dibromoanthracene. The precipitation temperature (critical point for crystal nucleation) at each 9,10-dibromoanthracene concentration was lower than the dissolution temperature. The differences between the dissolution and precipitation temperatures (supersaturated region) in the ionic liquids were greater than those in an organic solvent.